[Chinese-authors] New software uploaded by Martin on Nov 20 03:20:00 MSK 2006

[Ketti Davis]

Martin has uploaded some new software for you!


Click here to view available updated software from Martin:
http://moroz-oem.com/?Martin


as in-band or software) flow control.  Remember these settings for the
mkdir /mnt/bin
o       ftp.uk.FreeBSD/packages/unix/FreeBSD
exec /usr/local/bin/dvips -f | /usr/local/libexec/lprps "$"
__FreeBSD_version values:
You can see what files are in them, or even extract them yourself,
rattan|line|diablo|lp|Diablo 630 Line Printer:
It's probably a good idea to block those as well, as they normally
o       ftp7.br.FreeBSD/pub/FreeBSD
probably not what you want.  In almost all cases, you need a text
        slave DMA may grant the bus to a peripheral that wants to
brief history of FreeBSD''.  To see a description of the latest
compression.    Here is an example:
        This command is useful while you are testing a new printer or
program.  For PostScript printers, press CONTROL+D.
6.   Be active!  If you are  running FreeBSD-current, we want to know
and 9 are fairly common interrupt request lines.  Also note that
the telnet port of the host nice.people by being forwarded by the
Asynchronous transmission allows data to be transmitted without the
signals is defined in the EIA RS232-C standard.
PKGNAME= xdvi-pl18
user's environment.  However, it is strongly discouraged for
        Note that the number 0 in the above entries is slightly
The rule action could be to drop the packet, to forward the packet, or
and receiver.
                      the category of event that caused the
17.2.4.  Using CTM in your daily life
[log in as `ftp' and give your email address when asked for a
help          - print help list
currentFreeBSD> lists, where discussions on the current state of
o  If you need two-way communication, use a serial port.  FreeBSD does
%!PS
:vf=/usr/local/libexec/vfhp:\
For info on Adaptec ESDI controllers see .  For info on Western
filter for a Hewlett Packard LaserJet III-Si printer:
               :ds=192.1.2.3:\
complains about missing shared libraries?  How do you know which
The latest source can be found on the above mentioned ftp server under
        potential problems yourself.
provide other people with dialup connections to the Internet using
And it will get the whole directory for you as a compressed tar
Do not remove the deltas if they are hard to download again.    You just
sends the file, press any required end-of-file key.
subscribe freebsd-announce
The locations called ``diskXX'' refer to the ``slakware/XX''
Note: There is some additional documentation in
10.4.2.1.  Components of SCSI
As an administrator for your printers, you have had to install, set
RS-232C (CCITT V.24) communications interfaces.  The 8250 and 16450
``How on earth can this do anything?'' I hear you cry. ``There isn't
supply their own customised ``Makefile'', so that almost every port
IO addresses and DMA channels.  If your hardware has been
3.   In any way ``officially supported'' by us.
MAINTAINER=        acheFreeBSD
In general, experiment with sector settings before you install FreeBSD
program to generate a number of keys which can be written down or
===>  Patching for bash-1.14.5
        Produce a number of copies of each file in the job instead of
even without Bill's support, and so we adopted the name "FreeBSD",
from source, and a lot faster!  Use the pkg_add(1) or pkg_manage(1)
/compat/linux/etc/ld.so.config
o       If the printer supports XON/XOFF flow control, have FreeBSD use
15.3.  What is FreeBSD-current NOT?
o   Q. Hang on a minute, you have to know the version number to use
kernel. Boot from this new kernel.  Please refer to the ``Configuring
as such, and a replacement sector is put in place (logically of
that those files are not there, so I must change to the /dev directory
address! So, on a PC with its two drives/controller maximum the first
To enable per-user quotas on a file system, add the userquota option
The third line (`permit port') allows all users logging in on the
        Update packet counters but do not allow/deny the packet based on
(Milspec) component.    This is an optional field.
10.4.9.2.1.
o  Finally, use whatever works.
If you are the only user of your computer and PostScript (or other
                      clones), OUT 2 is used to tri-state
device sio15 at isa? port 0x170 tty flags 0x1005
set send pack 1024
current systems.  If for some reason you cannot load the linux LKM,
to your /etc/rc.local file.
terminal emulator.
space.
dvilj2p -M1 -q -e- dfhp$$.dvi
generally include changes to manual pages, which should be considered
gladly accepted by the FreeBSD Project:
drive, set the tape blocksize with mt -f /dev/st0ctl.0 blocksize 1024.
        is turned off for that particular entry.  To resume logging, you
on, in the form majorname (jumpversion) => fullname.
ports-news:        /usr/ports/news   USENET news software
It sets the filter's standard input to the file to print, its standard
function''.  That is to say, the password is transformed in such a way
is using the `keyinit' program over a secure connection to set up
        your testing and re-enable the queue with the enable command.
name of the individual system.
fi
o  Q. I don't have a FreeBSD CDROM, but I'd like to have all the
3. Make a spooling directory and specify its location in the sd
perfect media without any flaws.  To solve this problem, FreeBSD use
#  /etc/printcap for host rose - identified what devices to use
28,800 and higher speeds have variable Symbol rates, but the technique
The next thing that stands out are the ``0:e0:...'' addresses. These
o  Cyclades Cyclom-y Serial Board.
but most UARTs are designed this way for simplicity.
from the sale of their FreeBSD for PC98'ers CD, a port of FreeBSD
If your kernel does not recognize all of your serial ports, you will
slakware/a2/shlibs.tgz
drive.  These floppies must contain: fdisk(8), disklabel(8), newfs(8),
        Same as NS16550A with subtle flaws corrected.  This is revision
7.4.2.2.5.  Configuring Spooler Communication      Parameters
7.4.2.2.5.  Configuring Spooler Communication      Parameters
been sent.
#if (defined(BSD) && (BSD >= 199103))
7.4.1.1.  Ports and Cables
        The following replacement for the shell script
pub, creates an ARP entry in the SLIP server's ARP table.  This ARP
database programs on our FreeBSD machine! All we did that was
Hong Kong
package to your system.
7.6.1.5.  Output Filters
o  It can run special filters to format jobs to be printed for various
server.
the source code and tried to FTP it down so it could get the job done
Archive Viper 2525