[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[elpa] externals/auctex ef2999e6d7: Release GNU AUCTeX 13.2.3
|
From: |
Tassilo Horn |
|
Subject: |
[elpa] externals/auctex ef2999e6d7: Release GNU AUCTeX 13.2.3 |
|
Date: |
Thu, 7 Dec 2023 03:52:35 -0500 (EST) |
branch: externals/auctex
commit ef2999e6d7c3232c0fe82d1de89ddda17b88c5b0
Author: Tassilo Horn <tsdh@gnu.org>
Commit: Tassilo Horn <tsdh@gnu.org>
Release GNU AUCTeX 13.2.3
* GNU AUCTeX Version 13.2.3 released.
---
auctex.el | 2 +-
auctex.info | 724 +++++++++++++++++++++++++++--------------------------
preview-latex.info | 298 +++++++++++-----------
tex-site.el | 4 +-
4 files changed, 517 insertions(+), 511 deletions(-)
diff --git a/auctex.el b/auctex.el
index cc3e95e882..604f650bb2 100644
--- a/auctex.el
+++ b/auctex.el
@@ -2,7 +2,7 @@
;; Copyright (C) 2014-2023 Free Software Foundation, Inc.
-;; Version: 13.2.2
+;; Version: 13.2.3
;; URL: https://www.gnu.org/software/auctex/
;; Maintainer: auctex-devel@gnu.org
;; Notifications-To: auctex-diffs@gnu.org
diff --git a/auctex.info b/auctex.info
index c5204315a8..ba39960984 100644
--- a/auctex.info
+++ b/auctex.info
@@ -1,7 +1,6 @@
-This is auctex.info, produced by makeinfo version 7.0.3 from
-auctex.texi.
+This is auctex.info, produced by makeinfo version 7.1 from auctex.texi.
-This manual is for AUCTeX (version 13.2.2 from 2023-10-11), a
+This manual is for AUCTeX (version 13.2.3 from 2023-12-07), a
sophisticated TeX environment for Emacs.
Copyright © 1992-1995, 2001, 2002, 2004-2023 Free Software
@@ -12,7 +11,7 @@ Foundation, Inc.
Version 1.3 or any later version published by the Free Software
Foundation; with no Invariant Sections, no Front-Cover Texts and no
Back-Cover Texts. A copy of the license is included in the section
- entitled “GNU Free Documentation License.”
+ entitled "GNU Free Documentation License."
INFO-DIR-SECTION Emacs
START-INFO-DIR-ENTRY
* AUCTeX: (auctex). A sophisticated TeX environment for Emacs.
@@ -43,7 +42,7 @@ manual is useful by itself, but together they provide an
environment
where you will make very few LaTeX errors, and makes it easy to find the
errors that may slip through anyway.
- It is a good idea to make a printout of AUCTeX’s reference card
+ It is a good idea to make a printout of AUCTeX's reference card
‘tex-ref.tex’ or one of its typeset versions.
If you want to make AUCTeX aware of style files and multifile
@@ -62,7 +61,7 @@ navigation and a few other things. (*Note
(reftex)Installation::.)
see *note Introduction: (preview-latex)Top.
There is a mailing list for general discussion about AUCTeX: write a
-mail with “subscribe” in the subject to <auctex-request@gnu.org> to join
+mail with "subscribe" in the subject to <auctex-request@gnu.org> to join
it. Send contributions to <auctex@gnu.org>.
Bug reports should go to <bug-auctex@gnu.org>, suggestions for new
@@ -70,7 +69,7 @@ features, and pleas for help should go to either
<auctex-devel@gnu.org>
(the AUCTeX developers), or to <auctex@gnu.org> if they might have
general interest. Please use the command ‘M-x TeX-submit-bug-report
<RET>’ to report bugs if possible. You can subscribe to a low-volume
-announcement list by sending “subscribe” in the subject of a mail to
+announcement list by sending "subscribe" in the subject of a mail to
<info-auctex-request@gnu.org>.
* Menu:
@@ -84,7 +83,7 @@ announcement list by sending “subscribe” in the subject of a
mail to
* Appendices:: Copying, Changes, Development, FAQ, Texinfo
mode
* Indices:: Indices
- — The Detailed Node Listing —
+ -- The Detailed Node Listing --
Introduction
@@ -273,7 +272,7 @@ several files.
One component of AUCTeX that LaTeX users will find attractive is
preview-latex, a combination of folding and in-source previewing that
-provides true “What You See Is What You Get” experience in your
+provides true "What You See Is What You Get" experience in your
sourcebuffer, while letting you retain full control.
More detailed information about the features and usage of AUCTeX can
@@ -281,7 +280,7 @@ be found in the remainder of this manual.
AUCTeX is written entirely in Emacs Lisp, and hence you can easily
add new features for your own needs. It is a GNU project and
-distributed under the ‘GNU General Public License Version 3’.
+distributed under the 'GNU General Public License Version 3'.
The most recent version is always available at
<https://ftp.gnu.org/pub/gnu/auctex/>.
@@ -298,7 +297,7 @@ described in *note Changes::.
If you want to discuss AUCTeX with other users or its developers,
there are several mailing lists you can use.
- Send a mail with the subject “subscribe” to <auctex-request@gnu.org>
+ Send a mail with the subject "subscribe" to <auctex-request@gnu.org>
in order to join the general discussion list for AUCTeX. Articles
should be sent to <auctex@gnu.org>. In a similar way, you can subscribe
to the <info-auctex@gnu.org> list for just getting important
@@ -318,7 +317,7 @@ The modern and strongly recommended way of installing
AUCTeX is by using
the Emacs package manager integrated in Emacs 24 and greater (ELPA).
Simply do ‘M-x list-packages <RET>’, mark the auctex package for
installation with ‘i’, and hit ‘x’ to execute the installation
-procedure. That’s all.
+procedure. That's all.
‘use-package’ users can use this simple recipe in their
‘user-init-file’ which essentially does the same as the manual
@@ -401,16 +400,16 @@ File: auctex.info, Node: Prerequisites, Next:
Configure, Up: Installation
• GNU make
Recent AUCTeX uses GNU make specific capabilities in the Makefiles.
- If your OS’s default ‘make’ command is not GNU make, you have to
+ If your OS's default ‘make’ command is not GNU make, you have to
obtain it in order to build AUCTeX by yourself. GNU make is
- sometimes provided under the name ‘gmake’ in your OS’s binary
+ sometimes provided under the name ‘gmake’ in your OS's binary
package system.
• The Texinfo package
Strictly speaking, you can get away without it if you are building
from the distribution tarball, have not modified any files and
- don’t need a printed version of the manual: the pregenerated info
+ don't need a printed version of the manual: the pregenerated info
file is included in the tarball. At least version 4.0 is required.
For some known issues with various software, see *note
@@ -432,7 +431,7 @@ release, you will have to first follow the instructions in
‘README.GIT’).
On many machines, you will not need to specify any options, but if
-‘configure’ cannot determine something on its own, you’ll need to help
+‘configure’ cannot determine something on its own, you'll need to help
it out with one of these options:
‘--prefix=PREFIX’
@@ -456,7 +455,7 @@ it out with one of these options:
additional instructions.
‘--with-emacs=/PATH/TO/EMACS’
- If you are using a pretest which isn’t in your ‘PATH’, or
+ If you are using a pretest which isn't in your ‘PATH’, or
‘configure’ is not finding the right Emacs executable, you can
specify it with this option.
@@ -482,7 +481,7 @@ it out with one of these options:
You can use this option to specify the directory containing
automatically generated information by ‘M-x
TeX-auto-generate-global <RET>’. It is not necessary for most TeX
- installs, but may be used if you don’t like the directory that
+ installs, but may be used if you don't like the directory that
configure is suggesting.
‘--help’
@@ -515,7 +514,7 @@ it out with one of these options:
‘--with-tex-dir=/DIR’
If you want to specify an exact directory for the preview TeX
files, use ‘--with-tex-dir=/DIR’. In this case, the files will be
- placed in ‘/DIR’, and you’ll also need the following option:
+ placed in ‘/DIR’, and you'll also need the following option:
‘--with-doc-dir=/DIR’
This option may be used to specify where the TeX documentation
@@ -572,7 +571,7 @@ by placing the lines
into your init file such as ‘init.el’ or ‘.emacs’.
If you explicitly used ‘--with-lispdir’, you may need to add the
-specified directory into Emacs’ ‘load-path’ variable by adding something
+specified directory into Emacs' ‘load-path’ variable by adding something
like
(add-to-list 'load-path "~/elisp")
@@ -606,7 +605,7 @@ files, in particular plain TeX users. There are various
ways to tell
AUCTeX even after auto-activation that it should not get used, and they
are described in *note Introduction to AUCTeX: Introduction.
- So if you have users that don’t want to use the preinstalled AUCTeX,
+ So if you have users that don't want to use the preinstalled AUCTeX,
they can easily get rid of it. Activating AUCTeX by default is
therefore a good choice.
@@ -669,7 +668,7 @@ reasonably easy to maintain a bunch of personal software,
since the
prefix argument is supported by most ‘configure’ scripts.
You often need to specify ‘--with-lispdir’ option as well. If you
-haven’t installed Emacs under your home directory and use Emacs
+haven't installed Emacs under your home directory and use Emacs
installed in system directories, the ‘configure’ script might not be
able to figure out suitable place to install lisp files under your home
directory. In that case, the ‘configure’ script would silently choose,
@@ -679,15 +678,15 @@ files. Thus you will have to tell the ‘configure’ script
explicitly
where to put those files by, e.g.,
‘--with-lispdir=‘/home/myself/share/emacs/site-lisp’’.
- You’ll have to add something like
+ You'll have to add something like
‘/home/myself/share/emacs/site-lisp’ to your ‘load-path’ variable, if it
-isn’t there already.
+isn't there already.
In addition, you will have to tell ‘configure’ script where to
-install TeX-related files such as ‘preview.sty’ if preview-latex isn’t
+install TeX-related files such as ‘preview.sty’ if preview-latex isn't
disabled. It is enough to specify ‘--with-texmf-dir=$HOME/texmf’ for
most typical cases, but you have to create the direcotry ‘$HOME/texmf’
-in advance if it doesn’t exist. If this prescription doesn’t work,
+in advance if it doesn't exist. If this prescription doesn't work,
consider using one or more of the options ‘--with-texmf-dir=/DIR’,
‘--without-texmf-dir’, ‘--with-tex-dir=/DIR’ and ‘--with-doc-dir=/DIR’.
See *note Configure:: for detail of these options.
@@ -723,7 +722,7 @@ Making the Info files available
...............................
For making the info files accessible from within Elisp, something like
-the following might be convenient to add into your or other people’s
+the following might be convenient to add into your or other people's
startup files:
(eval-after-load 'info
@@ -740,7 +739,7 @@ work as well for them as for you.
........................................
With the techniques described above, it is also possible to use AUCTeX
-directly from a local Git repository. Let’s assume you have your Git
+directly from a local Git repository. Let's assume you have your Git
repositories under ‘~/development/’.
First, you have to fetch a copy of the AUCTeX Git repository. In a
@@ -753,7 +752,7 @@ shell, change directory to ‘~/development/’ and do:
When finished, simply enter
make
-and you’re finished. Note that the ‘make install’ step is not
+and you're finished. Note that the ‘make install’ step is not
necessary.
Now you have to tell Emacs about the plan. The following variables
@@ -767,7 +766,7 @@ The info files will be available with this:
'(add-to-list 'Info-additional-directory-list
"~/development/auctex/doc"))
-Now you’re ready to load ‘auctex.el’ and ‘preview-latex.el’ out of this
+Now you're ready to load ‘auctex.el’ and ‘preview-latex.el’ out of this
directory:
(load "~/development/auctex/auctex.el" nil t t)
(load "~/development/auctex/preview-latex.el" nil t t)
@@ -782,7 +781,7 @@ In a Nutshell
.............
The following are brief installation instructions for the impatient. In
-case you don’t understand some of this, run into trouble of some sort,
+case you don't understand some of this, run into trouble of some sort,
or need more elaborate information, refer to the detailed instructions
further below.
@@ -814,11 +813,11 @@ further below.
directories containing the programs to the ‘PATH’ environment
variable if necessary. Here is how to do that in W2000/XP:
- 1. On the desktop, right click “My Computer” and select
+ 1. On the desktop, right click "My Computer" and select
properties.
- 2. Click on “Advanced” in the “System Properties” window.
- 3. Select “Environment Variables”.
- 4. Select “path” in “System Variables” and click “edit”. Move to
+ 2. Click on "Advanced" in the "System Properties" window.
+ 3. Select "Environment Variables".
+ 4. Select "path" in "System Variables" and click "edit". Move to
the front in the line (this might require scrolling) and add
the missing path including drive letter, ended with a
semicolon.
@@ -852,12 +851,12 @@ path names are a mess.
The installation procedure tries finding stuff in system search paths
and in Emacs paths. For that to succeed, you have to use the same
syntax and spelling and case of paths everywhere: in your system search
-paths, in Emacs’ ‘load-path’ variable, as argument to the scripts. If
-your path names contain spaces or other ‘shell-unfriendly’ characters,
+paths, in Emacs' ‘load-path’ variable, as argument to the scripts. If
+your path names contain spaces or other 'shell-unfriendly' characters,
most notably backslashes for directory separators, place the whole path
in ‘"double quote marks"’ whenever you specify it on a command line.
- Avoid ‘helpful’ magic file names like ‘/cygdrive/c’ and
+ Avoid 'helpful' magic file names like ‘/cygdrive/c’ and
‘C:\PROGRA~1\’ like the plague. It is quite unlikely that the scripts
will be able to identify the actual file names involved. Use the full
paths, making use of normal Windows drive letters like ‘ 'C:/Program
@@ -884,7 +883,7 @@ single quotes for that.
problems, it might help if you try unpacking (or checking out) the
files in binary mode, if your tools allow that.
- If you don’t have a suitable unpacking tool, skip to the next step:
+ If you don't have a suitable unpacking tool, skip to the next step:
this should provide you with a working ‘unzip’ command.
2. The installation of AUCTeX will require the MSYS tool set from
@@ -898,7 +897,7 @@ single quotes for that.
If Cygwin specific paths like ‘/cygdrive/c’ crop up in the course
of the installation, using a non-Cygwin Emacs could conceivably
cause trouble. Using Cygwin either for everything or nothing might
- save headaches, _if_ things don’t work out.
+ save headaches, _if_ things don't work out.
3. Install a current version of Emacs from
<https://ftp.gnu.org/gnu/emacs/windows/>.
@@ -918,9 +917,9 @@ single quotes for that.
6. Perl (https://www.perl.org/) is needed for rebuilding the
documentation if you are working with a copy from Git or have
touched documentation source files in the preview-latex part. If
- the line endings of the file ‘preview/latex/preview.dtx’ don’t
+ the line endings of the file ‘preview/latex/preview.dtx’ don't
correspond with what Perl calls ‘\n’ when reading text files,
- you’ll run into trouble.
+ you'll run into trouble.
7. Now the fun stuff starts. If you have not yet done so, unpack the
AUCTeX distribution into a separate directory after rereading the
@@ -930,11 +929,11 @@ single quotes for that.
running ‘configure’, change into the installation directory and
call ‘./configure’ with appropriate options.
- Typical options you’ll want to specify will be
+ Typical options you'll want to specify will be
‘--prefix=DRIVE:/PATH/TO/EMACS-HIERARCHY’
which tells ‘configure’ where to perform the installation. It
may also make ‘configure’ find Emacs automatically; if this
- doesn’t happen, try ‘--with-emacs’ as described below. All
+ doesn't happen, try ‘--with-emacs’ as described below. All
automatic detection of files and directories restricts itself
to directories below the PREFIX or in the same hierarchy as
the program accessing the files. Usually, directories like
@@ -949,7 +948,7 @@ single quotes for that.
here. You stand a good chance that this will be the only
option you need to supply, as long as your TeX-related
executables are in your system path, which they better be for
- AUCTeX’s operation, anyway.
+ AUCTeX's operation, anyway.
‘--with-emacs’
if you are installing for a version of Emacs. You can use
@@ -1088,7 +1087,7 @@ accessible directly by typing ‘M-x customize-option <RET>
<option>
<RET>’.
-- User Option: TeX-macro-global
- Directories containing the site’s TeX style files.
+ Directories containing the site's TeX style files.
Normally, AUCTeX will only allow you to complete macros and
environments which are built-in, specified in AUCTeX style files or
@@ -1099,7 +1098,7 @@ this, you must set this variable to a list of directories
where the
standard style files are located. The directories will be searched
recursively, so there is no reason to list subdirectories explicitly.
Automatic configuration will already have set the variable for you if it
-could use the program ‘kpsewhich’. In this case you normally don’t have
+could use the program ‘kpsewhich’. In this case you normally don't have
to alter anything.
@@ -1196,7 +1195,7 @@ you will be asked for a label to be associated with the
section.
1.3.1.3 Inserting environments
..............................
-Similarly, you can insert environments, that is ‘\begin{}’–‘\end{}’
+Similarly, you can insert environments, that is ‘\begin{}’-‘\end{}’
pairs: Type ‘C-c C-e’, and select an environment type. Again, you can
use <TAB> or <SPC> to get a list, and to complete what you type.
Actually, the list will not only provide standard LaTeX environments,
@@ -1217,7 +1216,7 @@ for a LaTeX macro. You can use <TAB> for completion, or
the <up>/<down>
arrow keys (or ‘M-p’ and ‘M-n’) to browse the command history. In many
cases, AUCTeX knows which arguments a macro needs and will ask you for
that. It even can differentiate between mandatory and optional
-arguments—for details, see *note Completion::.
+arguments--for details, see *note Completion::.
An additional help for inserting macros is provided by the
possibility to complete macros right in the buffer. With point at the
@@ -1233,28 +1232,28 @@ They start with ‘C-c C-f’, and the last ‘C-’
combination tells AUCTeX
which font you want:
‘C-c C-f C-b’
- Insert bold face ‘\textbf{★}’ text.
+ Insert bold face ‘\textbf{⋆}’ text.
‘C-c C-f C-i’
- Insert italics ‘\textit{★}’ text.
+ Insert italics ‘\textit{⋆}’ text.
‘C-c C-f C-e’
- Insert _emphasized_ ‘\emph{★}’ text.
+ Insert _emphasized_ ‘\emph{⋆}’ text.
‘C-c C-f C-s’
- Insert slanted ‘\textsl{★}’ text.
+ Insert slanted ‘\textsl{⋆}’ text.
‘C-c C-f C-r’
- Insert roman ‘\textrm{★}’ text.
+ Insert roman ‘\textrm{⋆}’ text.
‘C-c C-f C-f’
- Insert sans serif ‘\textsf{★}’ text.
+ Insert sans serif ‘\textsf{⋆}’ text.
‘C-c C-f C-t’
- Insert typewriter ‘\texttt{★}’ text.
+ Insert typewriter ‘\texttt{⋆}’ text.
‘C-c C-f C-c’
- Insert SMALL CAPS ‘\textsc{★}’ text.
+ Insert SMALL CAPS ‘\textsc{⋆}’ text.
‘C-c C-f C-d’
Delete the innermost font specification containing point.
@@ -1270,14 +1269,14 @@ like ‘\mathbf’ will be inserted.
1.3.1.6 Other useful features
.............................
-AUCTeX also tries to help you when inserting the right “quote” signs for
+AUCTeX also tries to help you when inserting the right "quote" signs for
your language, dollar signs to typeset math, or pairs of braces. It
offers shortcuts for commenting out text (‘C-c ;’ for the current region
or ‘C-c %’ for the paragraph you are in). The same keystrokes will
remove the % signs, if the region or paragraph is commented out yet.
With ‘TeX-fold-mode’, you can hide certain parts (like footnotes,
-references etc.) that you do not edit currently. Support for Emacs’
-outline mode is provided as well. And there’s more, but this is beyond
+references etc.) that you do not edit currently. Support for Emacs'
+outline mode is provided as well. And there's more, but this is beyond
the scope of this Quick Start Guide.
@@ -1290,13 +1289,13 @@ File: auctex.info, Node: Processing Facilities, Prev:
Editing Facilities, Up:
.............................................................
If you have typed some text and want to run LaTeX (or TeX, or other
-programs—see below) on it, type ‘C-c C-c’. If applicable, you will be
+programs--see below) on it, type ‘C-c C-c’. If applicable, you will be
asked whether you want to save changes, and which program you want to
invoke. In many cases, the choice that AUCTeX suggests will be just
what you want: first ‘latex’, then a viewer. If a ‘latex’ run produces
or changes input files for ‘makeindex’, the next suggestion will be to
run that program, and AUCTeX knows that you need to run ‘latex’ again
-afterwards—the same holds for BibTeX.
+afterwards--the same holds for BibTeX.
When no processor invocation is necessary anymore, AUCTeX will
suggest to run a viewer, or you can chose to create a PostScript file
@@ -1314,7 +1313,7 @@ really good in detecting the standard situations when an
additional
creation of PostScript files or direct printing currently only works
when your output file is a DVI file, not a PDF file.
- Ah, you didn’t know you can do both? That brings us to the next
+ Ah, you didn't know you can do both? That brings us to the next
topic.
1.3.2.2 Choosing an output format
@@ -1343,7 +1342,7 @@ easy to memorize:
There is also another possibility: compile the document with ‘tex’
(or ‘latex’) and then convert the resulting DVI file to PDF using
-‘dvips’–‘ps2pdf’ sequence or ‘dvipdfmx’ command. If you want to go by
+‘dvips’-‘ps2pdf’ sequence or ‘dvipdfmx’ command. If you want to go by
this route, customize ‘TeX-PDF-from-DVI’ option. Then AUCTeX will
suggest you to run the appropriate command when you type ‘C-C C-c’. For
details, see *note Processor Options::.
@@ -1368,7 +1367,7 @@ you of overfull and underfull boxes in addition to
regular errors.
of all errors and warnings reported by the compiler.
If a command got stuck in a seemingly infinite loop, or you want to
-stop execution for other reasons, you can use ‘C-c C-k’ (for “kill”).
+stop execution for other reasons, you can use ‘C-c C-k’ (for "kill").
Similar to ‘C-l’, which centers the buffer you are in around your
current position, ‘C-c C-l’ centers the output buffer so that the last
lines added at the bottom become visible.
@@ -1461,8 +1460,8 @@ several of these languages and will change quote
insertion accordingly.
In case you are using the ‘csquotes’ package, you should customize
‘LaTeX-csquotes-open-quote’, ‘LaTeX-csquotes-close-quote’ and
‘LaTeX-csquotes-quote-after-quote’. The quotation characters will only
-be used if both variables—‘LaTeX-csquotes-open-quote’ and
-‘LaTeX-csquotes-close-quote’—are non-empty strings. But then the
+be used if both variables--‘LaTeX-csquotes-open-quote’ and
+‘LaTeX-csquotes-close-quote’--are non-empty strings. But then the
‘csquotes’-related values will take precedence over the
language-specific ones.
@@ -1527,15 +1526,15 @@ file
(lambda () (set (make-local-variable 'TeX-electric-math)
(cons "\\(" "\\)"))))
- Math mode which didn’t start with dollar(s) shouldn’t be closed with
+ Math mode which didn't start with dollar(s) shouldn't be closed with
dollar.
-- User Option: TeX-refuse-unmatched-dollar
This option determines the behavior when the user types ‘$’ at a
- position where AUCTeX thinks that it is in math mode which didn’t
+ position where AUCTeX thinks that it is in math mode which didn't
start with dollar(s).
When this option is ‘nil’, AUCTeX behaves in the same way as
- non-math mode, assuming that the user knows it isn’t in math mode
+ non-math mode, assuming that the user knows it isn't in math mode
actually. This is the default.
When this option is non-‘nil’, AUCTeX refuses to insert ‘$’ to
@@ -1641,44 +1640,44 @@ available for easy insertion of font changing macros.
If you give an argument (that is, type ‘C-u’) to the font command,
the innermost font will be replaced, i.e. the font in the TeX group
around point will be changed. The following table shows the available
-commands, with ‘★’ indicating the position where the text will be
+commands, with ‘⋆’ indicating the position where the text will be
inserted.
‘C-c C-f C-b’
- Insert bold face ‘\textbf{★}’ text.
+ Insert bold face ‘\textbf{⋆}’ text.
‘C-c C-f C-m’
- Insert medium face ‘\textmd{★}’ text.
+ Insert medium face ‘\textmd{⋆}’ text.
‘C-c C-f C-i’
- Insert italics ‘\textit{★}’ text.
+ Insert italics ‘\textit{⋆}’ text.
‘C-c C-f C-e’
- Insert _emphasized_ ‘\emph{★}’ text.
+ Insert _emphasized_ ‘\emph{⋆}’ text.
‘C-c C-f C-s’
- Insert slanted ‘\textsl{★}’ text.
+ Insert slanted ‘\textsl{⋆}’ text.
‘C-c C-f C-r’
- Insert roman ‘\textrm{★}’ text.
+ Insert roman ‘\textrm{⋆}’ text.
‘C-c C-f C-f’
- Insert sans serif ‘\textsf{★}’ text.
+ Insert sans serif ‘\textsf{⋆}’ text.
‘C-c C-f C-t’
- Insert typewriter ‘\texttt{★}’ text.
+ Insert typewriter ‘\texttt{⋆}’ text.
‘C-c C-f C-c’
- Insert SMALL CAPS ‘\textsc{★}’ text.
+ Insert SMALL CAPS ‘\textsc{⋆}’ text.
‘C-c C-f C-l’
- Insert upper lower case ‘\textulc{★}’ text.
+ Insert upper lower case ‘\textulc{⋆}’ text.
‘C-c C-f C-w’
- Insert SWASH ‘\textsw{★}’ text.
+ Insert SWASH ‘\textsw{⋆}’ text.
‘C-c C-f C-n’
- Insert normal ‘\textnormal{★}’ text.
+ Insert normal ‘\textnormal{⋆}’ text.
‘C-c C-f C-d’
Delete the innermost font specification containing point.
@@ -1709,7 +1708,7 @@ File: auctex.info, Node: Sectioning, Next:
Environments, Prev: Font Specifier
======================================
Insertion of sectioning macros, that is ‘\chapter’, ‘\section’,
-‘\subsection’, etc. and accompanying ‘\label’’s may be eased by using
+‘\subsection’, etc. and accompanying ‘\label’'s may be eased by using
‘C-c C-s’. This command is highly customizable, the following describes
the default behavior.
@@ -1824,7 +1823,7 @@ File: auctex.info, Node: Environments, Next:
Mathematics, Prev: Sectioning,
===================================
A large apparatus is available that supports insertions of environments,
-that is ‘\begin{}’ — ‘\end{}’ pairs.
+that is ‘\begin{}’ -- ‘\end{}’ pairs.
AUCTeX is aware of most of the actual environments available in a
specific document. This is achieved by examining your ‘\documentclass’
@@ -1901,7 +1900,7 @@ controlled by the user option
‘TeX-complete-expert-commands’.
Possible values are nil, t, or a list of style names.
nil
- Don’t complete expert commands (default).
+ Don't complete expert commands (default).
t
Always complete expert commands.
(STYLES ...)
@@ -1953,10 +1952,10 @@ When inserting equation-like environments, the ‘\label’
will have a
default prefix, which is controlled by the following variables:
-- User Option: LaTeX-equation-label
- Prefix to use for ‘equation’ labels.
+ Prefix to use for 'equation' labels.
-- User Option: LaTeX-eqnarray-label
- Prefix to use for ‘eqnarray’ labels.
+ Prefix to use for 'eqnarray' labels.
-- User Option: LaTeX-amsmath-label
Prefix to use for amsmath equation labels. Amsmath equations
@@ -1970,7 +1969,7 @@ File: auctex.info, Node: Floats, Next: Itemize-like,
Prev: Equations, Up: En
------------
Figures and tables (i.e., floats) may also be inserted using AUCTeX.
-After choosing either ‘figure’ or ‘table’ in the environment list
+After choosing either 'figure' or 'table' in the environment list
described above, you will be prompted for a number of additional things.
FLOAT POSITION
@@ -2031,8 +2030,8 @@ if the key binding is still available.
-- Command: LaTeX-insert-item
(‘C-c <LFD>’ or ‘M-<RET>’) Close the current item, move to the next
line and insert an appropriate ‘\item’ for the current environment.
- That is, ‘itemize’ and ‘enumerate’ will have ‘\item ’ inserted,
- while ‘description’ will have ‘\item[] ’ inserted.
+ That is, 'itemize' and 'enumerate' will have ‘\item ’ inserted,
+ while 'description' will have ‘\item[] ’ inserted.
-- User Option: TeX-arg-item-label-p
If non-nil, you will always be asked for optional label in items.
@@ -2044,7 +2043,7 @@ File: auctex.info, Node: Tabular-like, Next:
Customizing Environments, Prev:
2.4.4 Tabular-like Environments
-------------------------------
-When inserting Tabular-like environments, that is, ‘tabular’ ‘array’
+When inserting Tabular-like environments, that is, 'tabular' 'array'
etc., you will be prompted for a template for that environment. Related
variables:
@@ -2056,7 +2055,7 @@ variables:
-- User Option: LaTeX-default-position
Default position string for array and tabular environments. If
- nil, act like the empty string is given, but don’t prompt for a
+ nil, act like the empty string is given, but don't prompt for a
position.
AUCTeX calculates the number of columns from the format string and
@@ -2151,7 +2150,7 @@ file such as ‘init.el’ or ‘.emacs’:
Your Emacs built must be able to display include Unicode characters
in menus for this feature.
- AUCTeX’s reference card ‘tex-ref.tex’ includes a list of all math
+ AUCTeX's reference card ‘tex-ref.tex’ includes a list of all math
mode commands.
AUCTeX can help you write subscripts and superscripts in math
@@ -2189,8 +2188,8 @@ long LaTeX macros.
In order to use ‘TeX-complete-symbol’, you should write a backslash
and the start of the macro. Typing ‘M-<TAB>’ will now complete as much
of the macro, as it unambiguously can. For example, if you type
-‘‘\renewc’’ and then ‘M-<TAB>’, it will expand to ‘‘\renewcommand’’.
-But there’s more: if point is just after ‘\begin{’, then
+'‘\renewc’' and then ‘M-<TAB>’, it will expand to '‘\renewcommand’'.
+But there's more: if point is just after ‘\begin{’, then
‘TeX-complete-symbol’ will complete LaTeX environments, etc. This is
controlled by ‘TeX-complete-list’.
@@ -2203,7 +2202,7 @@ controlled by ‘TeX-complete-list’.
Each entry is a list with the following elements:
1. Regexp matching the preceding text or a predicate of arity 0
- which returns non-nil and sets ‘match-data’ appropriately if
+ which returns non-nil and sets 'match-data' appropriately if
it is applicable.
2. A number indicating the subgroup in the regexp containing the
text.
@@ -2223,17 +2222,17 @@ completions. Modern completion UIs like company-mode
or corfu support
this completion-at-point facility.
-- Function: TeX--completion-at-point
- AUCTeX’s completion-at-point function which is automatically added
+ AUCTeX's completion-at-point function which is automatically added
to ‘completion-at-point-functions’ in TeX and LaTeX buffers.
It offers the same completion candidates as would
‘TeX-complete-symbol’ (and is also controlled by
- ‘TeX-complete-list’) except that it doesn’t fall back on
+ ‘TeX-complete-list’) except that it doesn't fall back on
‘ispell-complete-word’ which would be awkward with completion UIs
like company-mode.
-- Function: LaTeX--arguments-completion-at-point
- AUCTeX’s completion-at-point function inside arguments which is
+ AUCTeX's completion-at-point function inside arguments which is
automatically added to ‘completion-at-point-functions’ in LaTeX
buffers.
@@ -2271,7 +2270,7 @@ or, as the first choice the value of the variable
‘TeX-default-macro’.
‘TeX-insert-macro’ asks for all optional arguments.
‘mandatory-args-only’, ‘TeX-insert-macro’ asks only for mandatory
arguments. When ‘TeX-insert-macro’ is called with prefix argument
- (‘C-u’), it’s the other way round.
+ (‘C-u’), it's the other way round.
Note that for some macros, there are special mechanisms, e.g.
‘TeX-arg-cite-note-p’ and ‘LaTeX-includegraphics-options-alist’.
@@ -2329,7 +2328,7 @@ controlled using the user option
‘TeX-complete-expert-commands’.
Possible values are nil, t, or a list of style names.
nil
- Don’t complete expert commands (default).
+ Don't complete expert commands (default).
t
Always complete expert commands.
(STYLES ...)
@@ -2468,10 +2467,10 @@ reasons that you would indent ordinary computer
programs.
Indentation is done by LaTeX environments and by TeX groups, that is
the body of an environment is indented by the value of
-‘LaTeX-indent-level’ (default 2). Also, items of an ‘itemize-like’
+‘LaTeX-indent-level’ (default 2). Also, items of an 'itemize-like'
environment are indented by the value of ‘LaTeX-item-indent’, default
−2. (Items are identified with the help of ‘LaTeX-item-regexp’.) If
-more environments are nested, they are indented ‘accumulated’ just like
+more environments are nested, they are indented 'accumulated' just like
most programming languages usually are seen indented in nested
constructs.
@@ -2550,7 +2549,7 @@ to indenting with a small summary in each case:
matched by a ‘\end’.
-- User Option: LaTeX-item-indent
- Number of spaces to add to the indentation for ‘\item’’s in list
+ Number of spaces to add to the indentation for ‘\item’'s in list
environments.
-- User Option: TeX-brace-indent-level
@@ -2617,7 +2616,7 @@ workarounds are available:
‘TeX-indent-close-delimiters’ to enable indent inside them. Be prepared
for similar side effects when you do.
- Note that commented curly braces ‘{’ and ‘}’ aren’t counted when
+ Note that commented curly braces ‘{’ and ‘}’ aren't counted when
AUCTeX computes indentation.
In docTeX-mode, TeX code is enclosed in ‘macrocode’ environment like
@@ -2738,7 +2737,7 @@ inside the comment, AUCTeX will report an error.
‘C-c C-q C-e’
‘LaTeX-fill-environment’ will fill and indent the current
- environment. This may e.g. be the ‘document’ environment, in which
+ environment. This may e.g. be the 'document' environment, in which
case the entire document will be formatted.
‘C-c C-q C-s’
@@ -2806,7 +2805,7 @@ built-in support for hiding macros and environments which
we call
folding here.
Besides folding of macros and environments, AUCTeX provides support
-for Emacs’ outline mode which lets you narrow the buffer content to
+for Emacs' outline mode which lets you narrow the buffer content to
certain sections of your text by hiding the parts not belonging to these
sections.
@@ -2853,7 +2852,7 @@ Font locking is supposed to improve readability of the
source code by
highlighting certain keywords with different colors or fonts. It
thereby lets you recognize the function of markup code to a certain
extent without having to read the markup command. For general
-information on controlling font locking with Emacs’ Font Lock mode, see
+information on controlling font locking with Emacs' Font Lock mode, see
*note Font Lock Mode: (emacs)Font Lock.
-- User Option: TeX-install-font-lock
@@ -2864,9 +2863,9 @@ information on controlling font locking with Emacs’ Font
Lock mode, see
customizing the variable ‘TeX-install-font-lock’.
Besides font-latex AUCTeX ships with a scheme which is derived from
- Emacs’ default LaTeX mode and activated by choosing
+ Emacs' default LaTeX mode and activated by choosing
‘tex-font-setup’. Be aware that this scheme is not coupled with
- AUCTeX’s style system and not the focus of development. Therefore
+ AUCTeX's style system and not the focus of development. Therefore
and due to font-latex being much more feature-rich the following
explanations will only cover font-latex.
@@ -3018,12 +3017,12 @@ use special macros in TeX groups, like ‘{\itshape ...}’
for italics and
variants commands and the latter declarations.
Besides the macros for changing fonts provided by LaTeX there is an
-infinite number of other macros—either defined by yourself for logical
-markup or defined by macro packages—which affect the font in the typeset
-text. While LaTeX’s built-in macros and macros of packages known by
-AUCTeX are already handled by font-latex, different keyword lists per
-type style and macro type are provided for entering your own macros
-which are listed in the table below.
+infinite number of other macros--either defined by yourself for logical
+markup or defined by macro packages--which affect the font in the
+typeset text. While LaTeX's built-in macros and macros of packages
+known by AUCTeX are already handled by font-latex, different keyword
+lists per type style and macro type are provided for entering your own
+macros which are listed in the table below.
‘font-latex-match-bold-command-keywords’
Keywords for commands specifying a bold type style.
@@ -3075,7 +3074,7 @@ following stanza into your init file:
font-latex-match-reference-keywords-local)
font-latex-match-reference-keywords-local)))
- But note that this means fiddling with font-latex’s internals and is
+ But note that this means fiddling with font-latex's internals and is
not guaranteed to work in future versions of font-latex.
User-defined keyword classes
@@ -3104,9 +3103,10 @@ variable ‘font-latex-user-keyword-classes’.
The face argument can either be an existing face or face attributes
made by you.
- There are three alternatives for the type of keywords—“Command with
- arguments”, “Declaration inside TeX group” and “Command without
- arguments”—which correspond with the macro types explained above.
+ There are three alternatives for the type of keywords--"Command
+ with arguments", "Declaration inside TeX group" and "Command
+ without arguments"--which correspond with the macro types explained
+ above.
File: auctex.info, Node: Fontification of quotes, Next: Fontification of
math, Prev: Fontification of macros, Up: Font Locking
@@ -3118,9 +3118,10 @@ Text in quotation marks is displayed with the face
‘font-latex-string-face’. Besides the various forms of opening and
closing double and single quotation marks, so-called guillemets (<<, >>)
can be used for quoting. Because there are two styles of using
-them—French style: << text >>; German style: >>text<<—you can customize
-the variable ‘font-latex-quotes’ to tell font-latex which type you are
-using if the correct value cannot be derived from document properties.
+them--French style: << text >>; German style: >>text<<--you can
+customize the variable ‘font-latex-quotes’ to tell font-latex which type
+you are using if the correct value cannot be derived from document
+properties.
-- User Option: font-latex-quotes
The default value of ‘font-latex-quotes’ is ‘auto’ which means that
@@ -3279,7 +3280,7 @@ footnotes or citations. Similarly you might find certain
environments
or comments distracting when trying to concentrate on the body of your
document.
- With AUCTeX’s folding functionality you can collapse those items and
+ With AUCTeX's folding functionality you can collapse those items and
replace them by a fixed string, the content of one of their arguments,
or a mixture of both. If you want to make the original text visible
again in order to view or edit it, move point sideways onto the
@@ -3457,7 +3458,7 @@ consideration which are specified in the variables
fold. Argument numbers refer to the ‘\begin’ statement. That
means if you have e.g. ‘\begin{tabularx}{\linewidth}{XXX} ...
\end{tabularx}’ and specify 3 as the argument number, the resulting
- display string will be “XXX”.
+ display string will be "XXX".
-- User Option: TeX-fold-math-spec-list
List of display strings and math macros to fold.
@@ -3570,19 +3571,19 @@ Emacs 25 is able to prettify symbols in programming
language buffers,
AUCTeX can use this feature in order to display certain math macros
and greek letters using their Unicode representation, too. For example,
the TeX code ‘\alpha \times \beta’ will be displayed as ‘α × β’. When
-point is on one of the characters, it’ll be unprettified automatically,
+point is on one of the characters, it'll be unprettified automatically,
meaning you see the verbatim text again. For this behaviour however you
need to set ‘prettify-symbols-unprettify-at-point’ to t or ‘right-edge’
which will unprettify the symbol when point moves into or near it.
To enable prettification in AUCTeX, simply add
‘prettify-symbols-mode’ to ‘TeX-mode-hook’. If you enabled
-prettification globally with ‘global-prettify-symbols-mode’, then it’s
+prettification globally with ‘global-prettify-symbols-mode’, then it's
automatically enabled in AUCTeX, too.
You can also add custom symbol unicode-character pairs for
prettification by adding to ‘tex--prettify-symbols-alist’. Note that
-this variable is part of Emacs’ stock ‘tex-mode.el’ and used by that and
+this variable is part of Emacs' stock ‘tex-mode.el’ and used by that and
AUCTeX.
@@ -3681,7 +3682,7 @@ current buffer is not its own master file.
numeric prefix arg is added to the current value of
‘LaTeX-command-section-level’. By default,
‘LaTeX-command-section-level’ is initialized with the current
- document’s ‘LaTeX-largest-level’. The buffer contents are written
+ document's ‘LaTeX-largest-level’. The buffer contents are written
into the region file, after extracting the header and trailer from
the master file. The command is then actually run on the region
file. See ‘TeX-command-region’ for details.
@@ -3716,7 +3717,7 @@ variables in a mode hook or per file by specifying them
as file
variables (*note (emacs)File Variables::).
-- Command: TeX-pin-region
- (‘C-c C-t C-r’) If you don’t have a mode like Transient Mark mode
+ (‘C-c C-t C-r’) If you don't have a mode like Transient Mark mode
active, where marks get disabled automatically, the region would
need to get properly set before each call to ‘TeX-command-region’.
If you fix the current region with ‘C-c C-t C-r’, then it will get
@@ -3729,7 +3730,7 @@ described in *note Debugging:: and *note Control:: will
work on that
process, otherwise they will work on the process associated with the
current document.
- Don’t run more than one process at the same time. AUCTeX doesn’t
+ Don't run more than one process at the same time. AUCTeX doesn't
support simultaneous typeset including region typeset. Wait for the
previous process to finish before you start a new process, in particular
when you are editing multiple documents in parallel. This limitation
@@ -3810,7 +3811,7 @@ directories. You can change this by setting the variable
files have changed.
When performing spell checking on a document or a region (invoked
-through AUCTeX’s ‘Spell’ command or ‘M-x ispell <RET>’), you want the
+through AUCTeX's ‘Spell’ command or ‘M-x ispell <RET>’), you want the
spell checking program to skip certain macro arguments and environments,
most notably the arguments of referencing macros and the contents of
verbatim environments. The skipped parts are controlled by variable
@@ -3857,7 +3858,7 @@ which can be added to this variable depending on the
value of
(KEY FUNCTION ARGS) - FUNCTION called with ARGS
returns end of region.")
- Let’s go through the first list of ‘ispell-tex-skip-alists’ line by
+ Let's go through the first list of ‘ispell-tex-skip-alists’ line by
line:
("\\\\addcontentsline" ispell-tex-arg-end 2)
‘KEY’ is the string ‘"\\\\addcontentsline"’, ‘FUNCTION’ is
@@ -3984,7 +3985,7 @@ are printed with.
the document into DVI output. Thus, if you want a PDF document in the
end you can either use XeTeX engine, see below for information about how
to set engines, or compile the document with ‘tex’ and then convert to
-PDF with ‘dvips’–‘ps2pdf’ before viewing it. In addition, current
+PDF with ‘dvips’-‘ps2pdf’ before viewing it. In addition, current
Japanese TeX engines cannot generate PDF directly so they rely on
DVI-to-PDF converters. Usually ‘dvipdfmx’ command is used for this
purpose. You can use the ‘TeX-PDF-from-DVI’ variable to let AUCTeX know
@@ -4057,7 +4058,7 @@ to add support for engines not covered per default.
used to identify the engine. The second is a string describing the
engine. The third is the command to be used for plain TeX. The
fourth is the command to be used for LaTeX. The fifth is the
- command to be used for the ‘--engine’ parameter of ConTeXt’s
+ command to be used for the ‘--engine’ parameter of ConTeXt's
‘texexec’ program. Each command can either be a variable or a
string. An empty string or nil means there is no command
available.
@@ -4324,7 +4325,7 @@ to do exactly. In xdvi you normally have to use
‘C-down-mouse-1’.
Note that inverse search with the Evince PDF viewer or its MATE fork
Atril might fail in raising the Emacs frame after updating point in your
-document’s buffer. There is simply no way to raise the Emacs frame
+document's buffer. There is simply no way to raise the Emacs frame
reliably accross different operating systems and different window
managers with their different focus stealing policies. If the Emacs
frame is not raised after performing an inverse search from Evince or
@@ -4361,9 +4362,9 @@ Atril, you can customize the following option.
---------- Footnotes ----------
(1) The keymap name is ‘TeX-source-correlate-map’, not
-‘TeX-source-correlate-mode-map’. Actually, this keymap isn’t
+‘TeX-source-correlate-mode-map’. Actually, this keymap isn't
implemented as minor mode map of ‘TeX-source-correlate-mode’, in order
-that its bindings don’t affect buffers outside of AUCTeX.
+that its bindings don't affect buffers outside of AUCTeX.
File: auctex.info, Node: Debugging, Next: Checking, Prev: Viewing, Up:
Processing
@@ -4371,7 +4372,7 @@ File: auctex.info, Node: Debugging, Next: Checking,
Prev: Viewing, Up: Proce
4.3 Catching the errors
=======================
-Once you’ve formatted your document you may ‘debug’ it, i.e. browse
+Once you've formatted your document you may 'debug' it, i.e. browse
through the errors (La)TeX reported. You may also have a look at a
nicely formatted list of all errors and warnings reported by the
compiler.
@@ -4410,7 +4411,7 @@ variable.
As default, AUCTeX will display a special help buffer containing the
error reported by TeX along with the documentation. There is however an
-‘expert’ option, which allows you to display the real TeX output.
+'expert' option, which allows you to display the real TeX output.
-- User Option: TeX-display-help
If t AUCTeX will automatically display a help text whenever an
@@ -4431,7 +4432,7 @@ File: auctex.info, Node: Ignoring warnings, Next: Error
overview, Up: Debuggi
-----------------------------------------
Normally AUCTeX will only report real errors, but you may as well ask it
-to report ‘bad boxes’ and warnings as well.
+to report 'bad boxes' and warnings as well.
-- Command: TeX-toggle-debug-bad-boxes
(‘C-c C-t C-b’) Toggle whether AUCTeX should stop at bad boxes
@@ -4544,7 +4545,7 @@ this to your init file:
as the flymake backend.
Each of the two utilities ‘lacheck’ and ‘chktex’ will find some
-errors the other doesn’t, but ‘chktex’ is more configurable, allowing
+errors the other doesn't, but ‘chktex’ is more configurable, allowing
you to create your own errors. You may need to install the programs
before using them. You can get ‘lacheck’ from
URL:<https://www.ctan.org/pkg/lacheck> and ‘chktex’ from
@@ -4568,7 +4569,7 @@ application running under AUCTeX
visible.
-- Command: TeX-home-buffer
- (‘C-c ^’) Go to the ‘master’ file in the document associated with
+ (‘C-c ^’) Go to the 'master' file in the document associated with
the current buffer, or if already there, to the file where the
current process was started.
@@ -4661,7 +4662,7 @@ File: auctex.info, Node: Documentation, Prev: Cleaning,
Up: Processing
(https://tug.org/texdoc/),
A command named ‘texdoc’ is also available in MiKTeX, but it
is merely a shortcut for an independent program, ‘mthelp’.
- Thus it isn’t sure whether this command works for MiKTeX or not.
+ Thus it isn't sure whether this command works for MiKTeX or not.
File: auctex.info, Node: Customization, Next: Appendices, Prev: Processing,
Up: Top
@@ -4728,7 +4729,7 @@ File: auctex.info, Node: Multifile, Next: Parsing
Files, Prev: Modes and Hook
You may wish to spread a document over many files (as you are likely to
do if there are multiple authors, or if you have not yet discovered the
power of the outline commands (*note Outline::)). This can be done by
-having a “master” file in which you include the various files with the
+having a "master" file in which you include the various files with the
TeX macro ‘\input’ or the LaTeX macro ‘\include’. These files may also
include other files themselves. However, to format the document you
must run the commands on the top level master file.
@@ -4774,7 +4775,7 @@ you can set ‘TeX-master’ in your init file such as
‘init.el’ or
but will not change the file.
If the variable is ‘dwim’, AUCTeX will try to avoid querying by
- attempting to “do what I mean”; and then change the file.
+ attempting to "do what I mean"; and then change the file.
-- User Option: TeX-one-master
Regular expression matching ordinary TeX files.
@@ -4875,7 +4876,7 @@ reparse the file.
With optional argument, also reload the style hooks.
When AUCTeX saves your buffer, it can optionally convert all tabs in
-your buffer into spaces. Tabs confuse AUCTeX’s error message parsing
+your buffer into spaces. Tabs confuse AUCTeX's error message parsing
and so should generally be avoided. However, tabs are significant in
some environments, and so by default AUCTeX does not remove them. To
convert tabs to spaces when saving a buffer, insert the following in
@@ -4975,7 +4976,7 @@ for Korean. They are necessary as well when you want to
typeset
documents saved in their domestic encodings such as ‘Shift-JIS’.
Currently, AUCTeX offers native support for pTeX, upTeX and jTeX only.
- If you don’t need fine tuning in the result with respect to the
+ If you don't need fine tuning in the result with respect to the
typesetting rules of their respective national standards, most unicode
based TeX engines, e.g. LuaTeX and XeTeX, can handle CJK languages by
default if they are encoded in UTF-8. The CJK-LaTeX package is provided
@@ -5179,7 +5180,7 @@ Emacs that support Japanese. AUCTeX supports three
Japanese TeX engines
by default: NTT jTeX, ASCII pTeX and upTeX.
Activate ‘japanese-plain-tex-mode’ or ‘japanese-latex-mode’ to use
-the Japanese TeX engines. If it doesn’t work, send mail to Masayuki
+the Japanese TeX engines. If it doesn't work, send mail to Masayuki
Ataka <masayuki.ataka@gmail.com> or Ikumi Keita
<ikumikeita@jcom.home.ne.jp>, who currently concern with stuff related
to Japanese in AUCTeX. None of the primary AUCTeX maintainers
@@ -5281,15 +5282,15 @@ options for them, or both, customize ‘TeX-engine-alist’.
mode buffer.
‘C-c C-f g’
- Insert gothic font command ‘\textgt{★}’ or ‘\mathgt{★}’ depending
+ Insert gothic font command ‘\textgt{⋆}’ or ‘\mathgt{⋆}’ depending
on the context.
‘C-c C-f m’
- Insert mincho font command ‘\textmc{★}’ or ‘\mathmc{★}’ depending
+ Insert mincho font command ‘\textmc{⋆}’ or ‘\mathmc{⋆}’ depending
on the context.
Although they are meaningful only with ‘ptex’ and ‘uptex’ engines, it
-won’t matter in buffers with other engines.
+won't matter in buffers with other engines.
See ‘tex-jp.el’ for more information.
@@ -5327,7 +5328,7 @@ is the local level.
By default AUCTeX will search for customization files in all the
global, private, and local style directories, but you can also set the
path directly. This is useful if you for example want to add another
-person’s style hooks to your path. Please note that all matching files
+person's style hooks to your path. Please note that all matching files
found in ‘TeX-style-path’ are loaded, and all hooks defined in the files
will be executed.
@@ -5368,7 +5369,7 @@ symbols when you try to do a completion.
the variable ‘TeX-auto-global’ to nil.
-- User Option: TeX-macro-global
- Directories containing the site’s TeX style files.
+ Directories containing the site's TeX style files.
-- User Option: TeX-style-global
Directory containing hand generated TeX information.
@@ -5715,7 +5716,7 @@ overwrite the default prompt.
being visited in the current buffer, without extension.
‘TeX-arg-input-file’
- Prompt for the name of an input file in TeX’s search path, and use
+ Prompt for the name of an input file in TeX's search path, and use
it without the extension. Run the style hooks for the file. (Note
that the behavior (type of prompt and inserted file name) of the
function can be controlled by the variable
@@ -6217,7 +6218,7 @@ A.1 Copying this Manual
The copyright notice for this manual is:
- This manual is for AUCTeX (version 13.2.2 from 2023-10-11), a
+ This manual is for AUCTeX (version 13.2.3 from 2023-12-07), a
sophisticated TeX environment for Emacs.
Copyright © 1992-1995, 2001, 2002, 2004-2023 Free Software
@@ -6228,7 +6229,7 @@ Foundation, Inc.
Version 1.3 or any later version published by the Free Software
Foundation; with no Invariant Sections, no Front-Cover Texts and no
Back-Cover Texts. A copy of the license is included in the section
- entitled “GNU Free Documentation License.”
+ entitled "GNU Free Documentation License."
The full license text can be read here:
@@ -6260,7 +6261,7 @@ A.1.1 GNU Free Documentation License
author and publisher a way to get credit for their work, while not
being considered responsible for modifications made by others.
- This License is a kind of “copyleft”, which means that derivative
+ This License is a kind of "copyleft", which means that derivative
works of the document must themselves be free in the same sense.
It complements the GNU General Public License, which is a copyleft
license designed for free software.
@@ -6281,18 +6282,18 @@ A.1.1 GNU Free Documentation License
be distributed under the terms of this License. Such a notice
grants a world-wide, royalty-free license, unlimited in duration,
to use that work under the conditions stated herein. The
- “Document”, below, refers to any such manual or work. Any member
- of the public is a licensee, and is addressed as “you”. You accept
+ "Document", below, refers to any such manual or work. Any member
+ of the public is a licensee, and is addressed as "you". You accept
the license if you copy, modify or distribute the work in a way
requiring permission under copyright law.
- A “Modified Version” of the Document means any work containing the
+ A "Modified Version" of the Document means any work containing the
Document or a portion of it, either copied verbatim, or with
modifications and/or translated into another language.
- A “Secondary Section” is a named appendix or a front-matter section
+ A "Secondary Section" is a named appendix or a front-matter section
of the Document that deals exclusively with the relationship of the
- publishers or authors of the Document to the Document’s overall
+ publishers or authors of the Document to the Document's overall
subject (or to related matters) and contains nothing that could
fall directly within that overall subject. (Thus, if the Document
is in part a textbook of mathematics, a Secondary Section may not
@@ -6301,7 +6302,7 @@ A.1.1 GNU Free Documentation License
of legal, commercial, philosophical, ethical or political position
regarding them.
- The “Invariant Sections” are certain Secondary Sections whose
+ The "Invariant Sections" are certain Secondary Sections whose
titles are designated, as being those of Invariant Sections, in the
notice that says that the Document is released under this License.
If a section does not fit the above definition of Secondary then it
@@ -6309,13 +6310,13 @@ A.1.1 GNU Free Documentation License
contain zero Invariant Sections. If the Document does not identify
any Invariant Sections then there are none.
- The “Cover Texts” are certain short passages of text that are
+ The "Cover Texts" are certain short passages of text that are
listed, as Front-Cover Texts or Back-Cover Texts, in the notice
that says that the Document is released under this License. A
Front-Cover Text may be at most 5 words, and a Back-Cover Text may
be at most 25 words.
- A “Transparent” copy of the Document means a machine-readable copy,
+ A "Transparent" copy of the Document means a machine-readable copy,
represented in a format whose specification is available to the
general public, that is suitable for revising the document
straightforwardly with generic text editors or (for images composed
@@ -6327,7 +6328,7 @@ A.1.1 GNU Free Documentation License
been arranged to thwart or discourage subsequent modification by
readers is not Transparent. An image format is not Transparent if
used for any substantial amount of text. A copy that is not
- “Transparent” is called “Opaque”.
+ "Transparent" is called "Opaque".
Examples of suitable formats for Transparent copies include plain
ASCII without markup, Texinfo input format, LaTeX input format,
@@ -6340,23 +6341,23 @@ A.1.1 GNU Free Documentation License
the machine-generated HTML, PostScript or PDF produced by some word
processors for output purposes only.
- The “Title Page” means, for a printed book, the title page itself,
+ The "Title Page" means, for a printed book, the title page itself,
plus such following pages as are needed to hold, legibly, the
material this License requires to appear in the title page. For
- works in formats which do not have any title page as such, “Title
- Page” means the text near the most prominent appearance of the
- work’s title, preceding the beginning of the body of the text.
+ works in formats which do not have any title page as such, "Title
+ Page" means the text near the most prominent appearance of the
+ work's title, preceding the beginning of the body of the text.
- The “publisher” means any person or entity that distributes copies
+ The "publisher" means any person or entity that distributes copies
of the Document to the public.
- A section “Entitled XYZ” means a named subunit of the Document
+ A section "Entitled XYZ" means a named subunit of the Document
whose title either is precisely XYZ or contains XYZ in parentheses
following text that translates XYZ in another language. (Here XYZ
stands for a specific section name mentioned below, such as
- “Acknowledgements”, “Dedications”, “Endorsements”, or “History”.)
- To “Preserve the Title” of such a section when you modify the
- Document means that it remains a section “Entitled XYZ” according
+ "Acknowledgements", "Dedications", "Endorsements", or "History".)
+ To "Preserve the Title" of such a section when you modify the
+ Document means that it remains a section "Entitled XYZ" according
to this definition.
The Document may include Warranty Disclaimers next to the notice
@@ -6386,7 +6387,7 @@ A.1.1 GNU Free Documentation License
If you publish printed copies (or copies in media that commonly
have printed covers) of the Document, numbering more than 100, and
- the Document’s license notice requires Cover Texts, you must
+ the Document's license notice requires Cover Texts, you must
enclose the copies in covers that carry, clearly and legibly, all
these Cover Texts: Front-Cover Texts on the front cover, and
Back-Cover Texts on the back cover. Both covers must also clearly
@@ -6458,15 +6459,15 @@ A.1.1 GNU Free Documentation License
the Addendum below.
G. Preserve in that license notice the full lists of Invariant
- Sections and required Cover Texts given in the Document’s
+ Sections and required Cover Texts given in the Document's
license notice.
H. Include an unaltered copy of this License.
- I. Preserve the section Entitled “History”, Preserve its Title,
+ I. Preserve the section Entitled "History", Preserve its Title,
and add to it an item stating at least the title, year, new
authors, and publisher of the Modified Version as given on the
- Title Page. If there is no section Entitled “History” in the
+ Title Page. If there is no section Entitled "History" in the
Document, create one stating the title, year, authors, and
publisher of the Document as given on its Title Page, then add
an item describing the Modified Version as stated in the
@@ -6476,12 +6477,12 @@ A.1.1 GNU Free Documentation License
for public access to a Transparent copy of the Document, and
likewise the network locations given in the Document for
previous versions it was based on. These may be placed in the
- “History” section. You may omit a network location for a work
+ "History" section. You may omit a network location for a work
that was published at least four years before the Document
itself, or if the original publisher of the version it refers
to gives permission.
- K. For any section Entitled “Acknowledgements” or “Dedications”,
+ K. For any section Entitled "Acknowledgements" or "Dedications",
Preserve the Title of the section, and preserve in the section
all the substance and tone of each of the contributor
acknowledgements and/or dedications given therein.
@@ -6490,11 +6491,11 @@ A.1.1 GNU Free Documentation License
in their text and in their titles. Section numbers or the
equivalent are not considered part of the section titles.
- M. Delete any section Entitled “Endorsements”. Such a section
+ M. Delete any section Entitled "Endorsements". Such a section
may not be included in the Modified Version.
N. Do not retitle any existing section to be Entitled
- “Endorsements” or to conflict in title with any Invariant
+ "Endorsements" or to conflict in title with any Invariant
Section.
O. Preserve any Warranty Disclaimers.
@@ -6503,15 +6504,15 @@ A.1.1 GNU Free Documentation License
appendices that qualify as Secondary Sections and contain no
material copied from the Document, you may at your option designate
some or all of these sections as invariant. To do this, add their
- titles to the list of Invariant Sections in the Modified Version’s
+ titles to the list of Invariant Sections in the Modified Version's
license notice. These titles must be distinct from any other
section titles.
- You may add a section Entitled “Endorsements”, provided it contains
+ You may add a section Entitled "Endorsements", provided it contains
nothing but endorsements of your Modified Version by various
- parties—for example, statements of peer review or that the text has
- been approved by an organization as the authoritative definition of
- a standard.
+ parties--for example, statements of peer review or that the text
+ has been approved by an organization as the authoritative
+ definition of a standard.
You may add a passage of up to five words as a Front-Cover Text,
and a passage of up to 25 words as a Back-Cover Text, to the end of
@@ -6549,10 +6550,10 @@ A.1.1 GNU Free Documentation License
combined work.
In the combination, you must combine any sections Entitled
- “History” in the various original documents, forming one section
- Entitled “History”; likewise combine any sections Entitled
- “Acknowledgements”, and any sections Entitled “Dedications”. You
- must delete all sections Entitled “Endorsements.”
+ "History" in the various original documents, forming one section
+ Entitled "History"; likewise combine any sections Entitled
+ "Acknowledgements", and any sections Entitled "Dedications". You
+ must delete all sections Entitled "Endorsements."
6. COLLECTIONS OF DOCUMENTS
@@ -6573,16 +6574,16 @@ A.1.1 GNU Free Documentation License
A compilation of the Document or its derivatives with other
separate and independent documents or works, in or on a volume of a
- storage or distribution medium, is called an “aggregate” if the
+ storage or distribution medium, is called an "aggregate" if the
copyright resulting from the compilation is not used to limit the
- legal rights of the compilation’s users beyond what the individual
+ legal rights of the compilation's users beyond what the individual
works permit. When the Document is included in an aggregate, this
License does not apply to the other works in the aggregate which
are not themselves derivative works of the Document.
If the Cover Text requirement of section 3 is applicable to these
copies of the Document, then if the Document is less than one half
- of the entire aggregate, the Document’s Cover Texts may be placed
+ of the entire aggregate, the Document's Cover Texts may be placed
on covers that bracket the Document within the aggregate, or the
electronic equivalent of covers if the Document is in electronic
form. Otherwise they must appear on printed covers that bracket
@@ -6604,8 +6605,8 @@ A.1.1 GNU Free Documentation License
this License or a notice or disclaimer, the original version will
prevail.
- If a section in the Document is Entitled “Acknowledgements”,
- “Dedications”, or “History”, the requirement (section 4) to
+ If a section in the Document is Entitled "Acknowledgements",
+ "Dedications", or "History", the requirement (section 4) to
Preserve its Title (section 1) will typically require changing the
actual title.
@@ -6646,7 +6647,7 @@ A.1.1 GNU Free Documentation License
Each version of the License is given a distinguishing version
number. If the Document specifies that a particular numbered
- version of this License “or any later version” applies to it, you
+ version of this License "or any later version" applies to it, you
have the option of following the terms and conditions either of
that specified version or of any later version that has been
published (not as a draft) by the Free Software Foundation. If the
@@ -6654,29 +6655,29 @@ A.1.1 GNU Free Documentation License
choose any version ever published (not as a draft) by the Free
Software Foundation. If the Document specifies that a proxy can
decide which future versions of this License can be used, that
- proxy’s public statement of acceptance of a version permanently
+ proxy's public statement of acceptance of a version permanently
authorizes you to choose that version for the Document.
11. RELICENSING
- “Massive Multiauthor Collaboration Site” (or “MMC Site”) means any
+ "Massive Multiauthor Collaboration Site" (or "MMC Site") means any
World Wide Web server that publishes copyrightable works and also
provides prominent facilities for anybody to edit those works. A
public wiki that anybody can edit is an example of such a server.
- A “Massive Multiauthor Collaboration” (or “MMC”) contained in the
+ A "Massive Multiauthor Collaboration" (or "MMC") contained in the
site means any set of copyrightable works thus published on the MMC
site.
- “CC-BY-SA” means the Creative Commons Attribution-Share Alike 3.0
+ "CC-BY-SA" means the Creative Commons Attribution-Share Alike 3.0
license published by Creative Commons Corporation, a not-for-profit
corporation with a principal place of business in San Francisco,
California, as well as future copyleft versions of that license
published by that same organization.
- “Incorporate” means to publish or republish a Document, in whole or
+ "Incorporate" means to publish or republish a Document, in whole or
in part, as part of another Document.
- An MMC is “eligible for relicensing” if it is licensed under this
+ An MMC is "eligible for relicensing" if it is licensed under this
License, and if all works that were first published under this
License somewhere other than this MMC, and subsequently
incorporated in whole or in part into the MMC, (1) had no cover
@@ -6703,7 +6704,7 @@ notices just after the title page:
Free Documentation License''.
If you have Invariant Sections, Front-Cover Texts and Back-Cover
-Texts, replace the “with...Texts.” line with this:
+Texts, replace the "with...Texts." line with this:
with the Invariant Sections being LIST THEIR TITLES, with
the Front-Cover Texts being LIST, and with the Back-Cover Texts
@@ -6731,12 +6732,17 @@ News since last release
• Now LaTeX abbrevs are available in docTeX mode buffers.
+ • Macros provided by the ‘xparse’ package are part of LaTeX kernel
+ since October 2020. AUCTeX tracks this change and the content of
+ ‘xparse.el’ is moved into ‘latex.el’ and ‘font-latex.el’
+ respectively.
+
News in 13.2
------------
• AUCTeX no longer refuses to insert dollar sign when you type ‘$’ at
- point where AUCTeX thinks the current math mode didn’t start with
- dollar(s). AUCTeX assumes the user knows that it isn’t in math
+ point where AUCTeX thinks the current math mode didn't start with
+ dollar(s). AUCTeX assumes the user knows that it isn't in math
mode actually.
You can keep the former behavior by enabling the new customize
@@ -6795,7 +6801,7 @@ News in 13.2
at master directory when ‘TeX-parse-self’ and ‘TeX-auto-save’
options are enabled. Now you can have support ‘.el’ file saved
under ‘auto’ subdirectory of each directory of the sub file when
- the sub files aren’t located at the master directory.
+ the sub files aren't located at the master directory.
To achieve that, set new user option ‘TeX-auto-save-aggregate’ to
‘nil’.
@@ -6836,11 +6842,11 @@ News in 13.1
So you can typeset Texinfo documents into PDF or DVI format from
within AUCTeX.
- • AUCTeX’s own help messages for LaTeX errors are now shown only for
+ • AUCTeX's own help messages for LaTeX errors are now shown only for
LaTeX runs. AUCTeX shows raw error/warning messages found in
‘.log’ files for runs of formats other than LaTeX, such as plain
TeX, ConTeXt and Texinfo, as it does even for LaTeX runs when it
- can’t find a matching entry in its own help message catalogue.
+ can't find a matching entry in its own help message catalogue.
Due to this change, customize option ‘TeX-error-description-list’
can no longer have a fallback entry that matches any error. If
@@ -6921,7 +6927,7 @@ News in 13.1
• The style ‘latexinfo.el’ is removed from AUCTeX. ‘latexinfo.el’
was meant to support latexinfo which in return was a LaTeX-2.09
- extension of Texinfo, but didn’t manage to replace Texinfo.
+ extension of Texinfo, but didn't manage to replace Texinfo.
• The style ‘siunitx.el’ is updated to support package version 3.
Key-value options provided by older package versions are removed,
@@ -6939,7 +6945,7 @@ News in 13.1
directory or a relative path which would be interpreted as being
relative to the master file in a multifile document.
- Note that this feature doesn’t work if the document includes sub
+ Note that this feature doesn't work if the document includes sub
file placed in sub directory below the main file via ‘\include’
command.
@@ -6965,7 +6971,7 @@ News in 12.3
as mentioned above.
• Math expression highlighting was improved. Highlighting for
- documents with a lot of inline math expressions ‘$...$’ won’t get
+ documents with a lot of inline math expressions ‘$...$’ won't get
scrambled now (‘bug#33139’).
In addition, it is no longer recommended to customize
@@ -7003,10 +7009,10 @@ News in 12.2
foreground colors of generated images to those of Emacs, when the
LaTeX command produces PDF. The traditional method became invalid
because of the change introduced in Ghostscript 9.27.
- Unfortunately, the new method doesn’t work due to a bug in
+ Unfortunately, the new method doesn't work due to a bug in
Ghostscript 9.27 and is valid only for Ghostscript > 9.27. There
is also a fallback method for gs 9.27 users which displays plain
- “black on white” images. For successful function of preview-latex,
+ "black on white" images. For successful function of preview-latex,
the users are encouraged to set up the new user option
‘preview-pdf-color-adjust-method’ to choose appropriate option
among the three: new, traditional and fallback method.
@@ -7022,12 +7028,12 @@ News in 12.2
in reverse to your expectation.
• A former customize option ‘japanese-TeX-command-list’ is removed.
- Use ‘japanese-TeX-engine-default’, or if it’s really necessary,
+ Use ‘japanese-TeX-engine-default’, or if it's really necessary,
customize ‘TeX-command-list’ directly if the task which the option
used to carry is required.
• Support for standard LaTeX without e-TeX extension is now very
- limited. It doesn’t work if raw TeX code is put on the command
+ limited. It doesn't work if raw TeX code is put on the command
line to invoke ‘latex’ command. It also fails for region
compilation (‘C-c C-r’ and so on) with documents of non-ascii file
name. In addition, it no longer works with preview-latex. We
@@ -7108,7 +7114,7 @@ News in 11.91
encoding of Japanese text and the necessary option to LaTeX command
is kept even when preamble caching is enabled.
- • The new “Glossaries” entry in ‘TeX-command-list’ runs the command
+ • The new "Glossaries" entry in ‘TeX-command-list’ runs the command
‘makeglossaries’.
• Fontification of control symbols has been improved. Characters
@@ -7302,7 +7308,7 @@ News in 11.89
• With new option ‘TeX-PDF-via-dvips-ps2pdf’ it is possible to
compile a document to DVI and then convert it to PDF using
- ‘dvips’–‘ps2pdf’ before viewing it.
+ ‘dvips’-‘ps2pdf’ before viewing it.
• New option ‘TeX-file-line-error’ allows to select file:line:error
style for error messages.
@@ -7699,7 +7705,7 @@ News in 11.81
‘font-latex-sectioning-N-keywords’. *Note Font Locking::, for
details. Make sure to adjust your customizations.
- • Titles in beamer slides marked by the “\frametitle” command are
+ • Titles in beamer slides marked by the "\frametitle" command are
know displayed with the new face ‘font-latex-slide-title-face’.
You can add macros to be highlighted with this face to
‘font-latex-match-slide-title-keywords’.
@@ -7739,7 +7745,7 @@ News in 11.54
• The parser (used e.g. for ‘TeX-auto-generate-global’) was extended
to recognize keywords common in LaTeX packages and classes, like
- “\DeclareRobustCommand” or “\RequirePackage”. Additionally a bug
+ "\DeclareRobustCommand" or "\RequirePackage". Additionally a bug
was fixed which led to duplicate entries in AUCTeX style files.
• Folding can now be done for paragraphs and regions besides single
@@ -7756,14 +7762,14 @@ News in 11.54
(add-hook 'LaTeX-mode-hook 'LaTeX-install-toolbar)
to your init file.
- • The manual now contains a new chapter “Quick Start”. It explains
+ • The manual now contains a new chapter "Quick Start". It explains
the main features and how to use them, and should be enough for a
new user to start using AUCTeX.
- • A new section “Font Locking” was added to the manual which explains
+ • A new section "Font Locking" was added to the manual which explains
syntax highlighting in AUCTeX and its customization. Together with
the sections related to folding and outlining, the section is part
- of the new chapter “Display”.
+ of the new chapter "Display".
• Keywords for syntax highlighting of LaTeX constructs to be typeset
in bold, italic or typewriter fonts may now be customized. Besides
@@ -7851,7 +7857,7 @@ News in 11.50
‘TeX-command-list’, you have to re-initialize it for this to work.
This means to open a customization buffer for the variable by
typing ‘M-x customize-variable <RET> TeX-command-list <RET>’,
- selecting “Erase Customization” and do your customization again
+ selecting "Erase Customization" and do your customization again
with the new default.
• The content of the command menu now depends on the mode (plain TeX,
@@ -7911,7 +7917,7 @@ News in 11.50
• Inserting graphics with ‘C-c <RET> includegraphics <RET>’ was
improved. See the variable ‘LaTeX-includegraphics-options-alist’.
- • If ‘LaTeX-default-position’ is ‘nil’, don’t prompt for position
+ • If ‘LaTeX-default-position’ is ‘nil’, don't prompt for position
arguments in Tabular-like environments, see *note Tabular-like::.
• Completion for available packages when using ‘C-c <RET> usepackage
@@ -8040,7 +8046,7 @@ The following sections describe future development of
AUCTeX. Besides
mid-term goals, bug reports and requests we cannot fix or honor right
away are being gathered here. If you have some time for Emacs Lisp
hacking, you are encouraged to try to provide a solution to one of the
-following problems. If you don’t know Lisp, you may help us to improve
+following problems. If you don't know Lisp, you may help us to improve
the documentation. It might be a good idea to discuss proposed changes
on the mailing list of AUCTeX first.
@@ -8084,7 +8090,7 @@ A.3.1 Mid-term Goals
• Fix remove-style feature
- Currently ‘TeX-remove-style’ implementation isn’t good. It is
+ Currently ‘TeX-remove-style’ implementation isn't good. It is
common practice that major mode functions directly add macros and
environments via ‘TeX-add-symbols’ and ‘LaTeX-add-environments’,
but those macros and environments are lost once ‘TeX-remove-style’
@@ -8099,7 +8105,7 @@ A.3.1 Mid-term Goals
• Factor out syntax propertization from ‘font-latex.el’
Syntax propertization is implemented in ‘font-latex.el’. This
- means that features which depend on syntax parse don’t work well
+ means that features which depend on syntax parse don't work well
for ‘tex-font.el’ users and those who disable font lock.
Hence syntax propertization should be factored out from
@@ -8158,7 +8164,7 @@ A.3.2 Wishlist
A separate frame with a table of math character graphics to click
on in order to insert the respective sequence into the buffer (cf.
- the “grid” of ‘x-symbol’).
+ the "grid" of ‘x-symbol’).
• Crossreferencing support
@@ -8193,9 +8199,9 @@ A.3.2 Wishlist
• Create template for (first) line of tabular environment.
• I think prompting for the master is the intended behaviour. It
- corresponds to a ‘shared’ value for ‘TeX-master’.
+ corresponds to a 'shared' value for ‘TeX-master’.
- There should probably be a ‘none’ value which wouldn’t query for
+ There should probably be a 'none' value which wouldn't query for
the master, but instead disable all features that relies on
‘TeX-master’.
@@ -8296,7 +8302,7 @@ A.3.3 Bugs
• The style hooks automatically generated by parsing files for
‘example.dtx’, ‘example.sty’, ‘example.drv’ and ‘example.bib’ all
clash. Bad. Clash with hand-written style hooks should be removed
- by dialect discrimination — to be checked.
+ by dialect discrimination -- to be checked.
• ‘C-c `’ should always stay in the current window, also when it
finds a new file.
@@ -8305,7 +8311,7 @@ A.3.3 Bugs
loading a new file.
• Maybe the regexp for matching a TeX symbol during parsing should be
- ‘"\\\\\\([a-zA-Z]+\\|.\\)"’ —
+ ‘"\\\\\\([a-zA-Z]+\\|.\\)"’ --
<thiemann@informatik.uni-tuebingen.de> Peter Thiemann.
• AUCTeX should not parse verbatim environments.
@@ -8314,7 +8320,7 @@ A.3.3 Bugs
self insert if not in a math context.
• Make ‘TeX-insert-dollar’ more robust. Currently it can be fooled
- by ‘\mbox’’es and escaped double dollar for example.
+ by ‘\mbox’'es and escaped double dollar for example.
• Correct indentation for tabbing, table, and math environments.
@@ -8362,7 +8368,7 @@ A.4 Frequently Asked Questions
--eval "(progn (setq package-load-list '((auctex t)))
(package-initialize))"’. The ‘--eval’ option activates only
AUCTeX among all installed ELPA packages.
- • If you installed AUCTeX via traditional ‘configure’–‘make’
+ • If you installed AUCTeX via traditional ‘configure’-‘make’
scheme, use ‘emacs -q -no-site-file -l auctex’. The ‘-l’
option loads ‘auctex.el’ which you normally do in your init
file.
@@ -8387,7 +8393,7 @@ A.4 Frequently Asked Questions
relevant programs, as described in *note (auctex)Installation under
MS Windows::.
- 4. Why doesn’t the completion, style file, or multifile stuff work?
+ 4. Why doesn't the completion, style file, or multifile stuff work?
It must be enabled first, insert this in your init file:
@@ -8398,7 +8404,7 @@ A.4 Frequently Asked Questions
Read also the chapters about parsing and multifile documents in the
manual. *Note Parsing Files:: and *note Multifile::.
- 5. Why doesn’t ‘TeX-save-document’ work?
+ 5. Why doesn't ‘TeX-save-document’ work?
‘TeX-check-path’ has to contain "‘./’" somewhere.
@@ -8409,9 +8415,9 @@ A.4 Frequently Asked Questions
information about a file, so you should use unique base names for
your files. E.g. rename ‘foo.bib’ to ‘foob.bib’.
- 7. Why doesn’t AUCTeX signal when processing a document is done?
+ 7. Why doesn't AUCTeX signal when processing a document is done?
- If the message in the minibuffer stays "Type ‘C-c C-l’ to display
+ If the message in the minibuffer stays "Type 'C-c C-l' to display
results of compilation.", you probably have a misconfiguration in
your init file (‘.emacs’, ‘init.el’ or similar). To track this
down either search in the ‘*Messages*’ buffer for an error message
@@ -8447,7 +8453,7 @@ A.4 Frequently Asked Questions
File: auctex.info, Node: Texinfo mode, Prev: FAQ, Up: Appendices
-A.5 Features specific to AUCTeX’s Texinfo major mode
+A.5 Features specific to AUCTeX's Texinfo major mode
====================================================
AUCTeX includes a major mode for editting Texinfo files. This major
@@ -8668,20 +8674,26 @@ Key Index
[index ]
* Menu:
+* _: Mathematics. (line 64)
* ": Quotes. (line 15)
-* $: Quotes. (line 61)
* (: Quotes. (line 168)
* [: Quotes. (line 168)
-* ^: Mathematics. (line 64)
-* _: Mathematics. (line 64)
* {: Quotes. (line 168)
-* C-c %: Commenting. (line 23)
-* C-c *: Marking (LaTeX). (line 7)
-* C-c * <1>: Marking (Texinfo). (line 7)
-* C-c .: Marking (LaTeX). (line 16)
-* C-c . <1>: Marking (Texinfo). (line 25)
+* ^: Mathematics. (line 64)
+* $: Quotes. (line 61)
+* C-c _: Multifile. (line 71)
* C-c ;: Commenting. (line 15)
* C-c ?: Documentation. (line 7)
+* C-c .: Marking (LaTeX). (line 16)
+* C-c . <1>: Marking (Texinfo). (line 25)
+* C-c ]: Environments. (line 102)
+* C-c {: Quotes. (line 136)
+* C-c *: Marking (LaTeX). (line 7)
+* C-c * <1>: Marking (Texinfo). (line 7)
+* C-c %: Commenting. (line 23)
+* C-c `: Debugging. (line 12)
+* C-c ^: Control. (line 18)
+* C-c ~: Mathematics. (line 12)
* C-c C-a: Starting a Command. (line 59)
* C-c C-b: Starting a Command. (line 35)
* C-c C-c: Starting a Command. (line 13)
@@ -8756,12 +8768,6 @@ Key Index
* C-c C-z: Starting a Command. (line 42)
* C-c LFD: Itemize-like. (line 11)
* C-c LFD <1>: Tabular-like. (line 34)
-* C-c ]: Environments. (line 102)
-* C-c ^: Control. (line 18)
-* C-c _: Multifile. (line 71)
-* C-c `: Debugging. (line 12)
-* C-c {: Quotes. (line 136)
-* C-c ~: Mathematics. (line 12)
* C-j: Indenting. (line 78)
* C-M-a: Environments. (line 107)
* C-M-e: Environments. (line 117)
@@ -9032,7 +9038,7 @@ Variable Index
* font-latex-math-environments: Fontification of math.
(line 6)
* font-latex-quotes: Fontification of quotes.
- (line 14)
+ (line 15)
* font-latex-script-char-face: Fontification of math.
(line 63)
* font-latex-script-display: Fontification of math.
@@ -9386,7 +9392,7 @@ Concept Index
(line 6)
* ASCII pTeX <1>: Japanese. (line 6)
* auctex.el: Loading the package. (line 10)
-* auctex.el <1>: Changes. (line 888)
+* auctex.el <1>: Changes. (line 893)
* auto directories.: Automatic. (line 6)
* auto-fill-mode: Indenting. (line 29)
* Auto-Reveal: Folding. (line 6)
@@ -9691,7 +9697,7 @@ Concept Index
(line 252)
* tex-site.el: Loading the package. (line 10)
* tex-site.el <1>: Customizing. (line 6)
-* tex-site.el <2>: Changes. (line 888)
+* tex-site.el <2>: Changes. (line 893)
* tool bar, toolbar: Processing. (line 11)
* Trailer: Commands. (line 6)
* Underfull boxes: Debugging. (line 6)
@@ -9713,105 +9719,105 @@ Concept Index
Tag Table:
-Node: Top922
-Node: Copying7402
-Node: Introduction9351
-Node: Summary9621
-Node: Installation12370
-Node: Prerequisites14381
-Node: Configure16608
-Node: Build/install and uninstall21351
-Node: Loading the package22108
-Node: Advice for package providers23847
-Node: Advice for non-privileged users26718
-Node: Installation under MS Windows32236
-Node: Customizing46176
-Node: Quick Start47785
-Ref: Quick Start-Footnote-149918
-Node: Editing Facilities50020
-Node: Processing Facilities54912
-Node: Editing59803
-Node: Quotes61141
-Node: Font Specifiers70679
-Node: Sectioning72875
-Node: Environments77572
-Node: Equations83140
-Node: Floats83768
-Node: Itemize-like85812
-Node: Tabular-like86682
-Node: Customizing Environments88576
-Node: Mathematics88816
-Node: Completion92342
-Node: Marking100109
-Node: Marking (LaTeX)100745
-Node: Marking (Texinfo)101695
-Node: Commenting103338
-Node: Indenting104723
-Node: Filling113442
-Node: Display119464
-Node: Font Locking121977
-Node: Fontification of macros124082
-Node: Fontification of quotes134104
-Node: Fontification of math135644
-Node: Verbatim content139420
-Node: Faces140210
-Node: Known problems140715
-Node: Folding141724
-Node: Outline152855
-Node: Narrowing154178
-Node: Prettifying155255
-Node: Processing156542
-Node: Commands157902
-Node: Starting a Command158466
-Node: Selecting a Command163630
-Node: Processor Options173033
-Node: Viewing183706
-Node: Starting Viewers184080
-Node: I/O Correlation189878
-Ref: I/O Correlation-Footnote-1195636
-Node: Debugging195902
-Node: Ignoring warnings198582
-Node: Error overview200693
-Node: Checking202617
-Node: Control204307
-Node: Cleaning206456
-Node: Documentation207903
-Node: Customization209026
-Node: Modes and Hooks209519
-Node: Multifile211479
-Node: Parsing Files216325
-Node: Internationalization221364
-Node: European222719
-Node: Japanese230638
-Node: Automatic235898
-Node: Automatic Global238427
-Node: Automatic Private239565
-Node: Automatic Local240929
-Node: Style Files242203
-Node: Simple Style243017
-Node: Adding Macros246810
-Node: Adding Environments256611
-Node: Adding Other262073
-Node: Hacking the Parser266753
-Node: Appendices270766
-Node: Copying this Manual271062
-Node: GNU Free Documentation License271948
-Node: Changes297272
-Node: Development356809
-Node: Mid-term Goals357457
-Node: Wishlist360356
-Node: Bugs366559
-Node: FAQ367699
-Node: Texinfo mode373573
-Node: Exploiting374709
-Node: Superseding375531
-Node: Mapping380346
-Node: Unbinding382289
-Node: Indices382837
-Node: Key Index383000
-Node: Function Index390894
-Node: Variable Index403456
-Node: Concept Index428961
+Node: Top916
+Node: Copying7384
+Node: Introduction9333
+Node: Summary9603
+Node: Installation12340
+Node: Prerequisites14349
+Node: Configure16570
+Node: Build/install and uninstall21305
+Node: Loading the package22062
+Node: Advice for package providers23799
+Node: Advice for non-privileged users26668
+Node: Installation under MS Windows32166
+Node: Customizing46052
+Node: Quick Start47657
+Ref: Quick Start-Footnote-149790
+Node: Editing Facilities49892
+Node: Processing Facilities54773
+Node: Editing59654
+Node: Quotes60992
+Node: Font Specifiers70520
+Node: Sectioning72716
+Node: Environments77411
+Node: Equations82976
+Node: Floats83596
+Node: Itemize-like85632
+Node: Tabular-like86490
+Node: Customizing Environments88374
+Node: Mathematics88614
+Node: Completion92138
+Node: Marking99881
+Node: Marking (LaTeX)100517
+Node: Marking (Texinfo)101467
+Node: Commenting103110
+Node: Indenting104495
+Node: Filling113202
+Node: Display119220
+Node: Font Locking121731
+Node: Fontification of macros123830
+Node: Fontification of quotes133837
+Node: Fontification of math135375
+Node: Verbatim content139151
+Node: Faces139941
+Node: Known problems140446
+Node: Folding141455
+Node: Outline152580
+Node: Narrowing153903
+Node: Prettifying154980
+Node: Processing156261
+Node: Commands157621
+Node: Starting a Command158185
+Node: Selecting a Command163341
+Node: Processor Options172740
+Node: Viewing183409
+Node: Starting Viewers183783
+Node: I/O Correlation189581
+Ref: I/O Correlation-Footnote-1195337
+Node: Debugging195599
+Node: Ignoring warnings198269
+Node: Error overview200376
+Node: Checking202300
+Node: Control203988
+Node: Cleaning206133
+Node: Documentation207580
+Node: Customization208701
+Node: Modes and Hooks209194
+Node: Multifile211154
+Node: Parsing Files215992
+Node: Internationalization221029
+Node: European222382
+Node: Japanese230301
+Node: Automatic235557
+Node: Automatic Global238084
+Node: Automatic Private239220
+Node: Automatic Local240584
+Node: Style Files241858
+Node: Simple Style242672
+Node: Adding Macros246465
+Node: Adding Environments256264
+Node: Adding Other261726
+Node: Hacking the Parser266406
+Node: Appendices270419
+Node: Copying this Manual270715
+Node: GNU Free Documentation License271597
+Node: Changes296720
+Node: Development356436
+Node: Mid-term Goals357082
+Node: Wishlist359977
+Node: Bugs366166
+Node: FAQ367302
+Node: Texinfo mode373164
+Node: Exploiting374298
+Node: Superseding375120
+Node: Mapping379935
+Node: Unbinding381878
+Node: Indices382426
+Node: Key Index382589
+Node: Function Index390483
+Node: Variable Index403045
+Node: Concept Index428550
End Tag Table
diff --git a/preview-latex.info b/preview-latex.info
index 3c8c4b3a93..661cc960a5 100644
--- a/preview-latex.info
+++ b/preview-latex.info
@@ -1,8 +1,8 @@
-This is preview-latex.info, produced by makeinfo version 7.0.3 from
+This is preview-latex.info, produced by makeinfo version 7.1 from
preview-latex.texi.
This manual is for preview-latex, a LaTeX preview mode for AUCTeX
-(version 13.2.2 from 2023-10-11).
+(version 13.2.3 from 2023-12-07).
Copyright © 2001, 2002, 2003, 2004, 2005, 2006, 2017-2019, 2021 Free
Software Foundation, Inc.
@@ -12,7 +12,7 @@ Software Foundation, Inc.
Version 1.3 or any later version published by the Free Software
Foundation; with no Invariant Sections, no Front-Cover Texts and no
Back-Cover Texts. A copy of the license is included in the section
- entitled “GNU Free Documentation License.”
+ entitled "GNU Free Documentation License."
INFO-DIR-SECTION Emacs
START-INFO-DIR-ENTRY
* preview-latex: (preview-latex). Preview LaTeX fragments in Emacs
@@ -103,12 +103,12 @@ File: preview-latex.info, Node: What use is it?, Next:
Activating preview-late
WYSIWYG (what you see is what you get) sometimes is considered all the
rage, sometimes frowned upon. Do we really want it? Wrong question.
The right question is _what_ we want from it. Except when finetuning
-the layout, we don’t want to use printer fonts for on-screen text
+the layout, we don't want to use printer fonts for on-screen text
editing. The low resolution and contrast of a computer screen render
all but the coarsest printer fonts (those for low-quality newsprint)
unappealing, and the margins and pagination of the print are not wanted
on the screen, either. On the other hand, more complex visual
-compositions like math formulas and tables can’t easily be taken in when
+compositions like math formulas and tables can't easily be taken in when
seen only in the source. preview-latex strikes a balance: it only uses
graphic renditions of the output for certain, configurable constructs,
does this only when told, and then right in the source code. Switching
@@ -134,8 +134,8 @@ installation.
(load "preview-latex.el" nil t t)
- If you still don’t get a “Preview” menu in LaTeX mode in spite of
-AUCTeX showing its “Command”, your installation is broken. One possible
+ If you still don't get a "Preview" menu in LaTeX mode in spite of
+AUCTeX showing its "Command", your installation is broken. One possible
cause are duplicate Lisp files that might be detectable with ‘M-x
list-load-path-shadows <RET>’.
@@ -152,7 +152,7 @@ included in the distribution, but most documents including
math and/or
figures should do), you can use its menu or ‘C-c C-p C-d’ (for
‘Preview/Document’). Previews will now be generated for various objects
in your document. You can use the time to take a short look at the
-other menu entries and key bindings in the ‘Preview’ menu. You’ll see
+other menu entries and key bindings in the ‘Preview’ menu. You'll see
the previewed objects change into a roadworks sign when preview-latex
has determined just what it is going to preview. Note that you can
freely navigate the buffer while this is going on. When the process is
@@ -174,7 +174,7 @@ C-p’ (or by clicking with the middle mouse button on the
icon before the
edited text).
If you are using the ‘desktop’ package, previews will remain from one
-session to the next as long as you don’t kill your buffer.
+session to the next as long as you don't kill your buffer.
File: preview-latex.info, Node: Basic modes of operation, Next: More
documentation, Prev: Getting started, Up: Introduction
@@ -183,7 +183,7 @@ File: preview-latex.info, Node: Basic modes of operation,
Next: More documenta
============================
preview-latex has a number of methods for generating its graphics. Its
-default operation is equivalent to using the ‘LaTeX’ command from
+default operation is equivalent to using the 'LaTeX' command from
AUCTeX. If this happens to be a call of PDFLaTeX generating PDF output
(you need at least AUCTeX 11.51 for this), then Ghostscript will be
called directly on the resulting PDF file. If a DVI file gets produced,
@@ -260,11 +260,11 @@ installation fails (but this should be a rare event),
report bugs to
There is a general discussion list for AUCTeX which also covers
preview-latex, look at <https://lists.gnu.org/mailman/listinfo/auctex>.
For more information on the mailing list, send a message with just the
-word “help” as subject or body to <auctex-request@gnu.org>. For the
+word "help" as subject or body to <auctex-request@gnu.org>. For the
developers, there is the <auctex-devel@gnu.org> list; it would probably
make sense to direct feature requests and questions about internal
details there. There is a low-volume read-only announcement list
-available to which you can subscribe by sending a mail with “subscribe”
+available to which you can subscribe by sending a mail with "subscribe"
in the subject to <info-auctex-request@gnu.org>.
Offers to support further development will be appreciated. If you
@@ -339,7 +339,7 @@ Copy a region as MML
‘preview-transparent-border’ set to ‘nil’, or the images will have
an ugly border. preview-latex detects this condition and asks
whether to regenerate the region with borders switched off. As
- this is an asynchronous operation running in the background, you’ll
+ this is an asynchronous operation running in the background, you'll
need to call this command explicitly again to get the newly
generated images into the kill ring.
@@ -422,10 +422,10 @@ Preview/Turn preamble cache on
Note that support for preamble cache is limited for LaTeX variants.
c.f. <https://github.com/davidcarlisle/dpctex/issues/15>
• XeLaTeX cannot use preamble cache at all. The reason is
- intrinsic in XeLaTeX, so preview-latex can’t help.
+ intrinsic in XeLaTeX, so preview-latex can't help.
• LuaLaTeX works with preamble cache only when the preamble is
- simple enough, i.e., when it doesn’t load opentype fonts and
- it doesn’t use lua codes in preamble.
+ simple enough, i.e., when it doesn't load opentype fonts and
+ it doesn't use lua codes in preamble.
‘C-c C-p C-c C-f’
‘preview-cache-preamble-off’
@@ -562,11 +562,11 @@ in *note For advanced users::), but some are:
files relating to the ‘preview’ package are installed in a
subdirectory ‘preview’, the default behavior).
- • Don’t preview inline math
+ • Don't preview inline math
If you have performance problems because your document is full of
inline math (‘$...$’), or if your usage of ‘$’ conflicts with
- preview-latex’s, you can turn off inline math previews. In the
+ preview-latex's, you can turn off inline math previews. In the
‘Preview Latex’ group, remove ‘textmath’ from
‘preview-default-option-list’ by customizing this variable.
@@ -614,8 +614,8 @@ in order to customize this.
One particular problem is that several printer setup files (typically
in a file called ‘/usr/share/texmf/dvips/config/config.pdf’ if you are
-using the ‘-Ppdf’ switch) contain the ‘G’ option for ‘character
-shifting’. This option will result in ‘fi’ being rendered as ‘£’
+using the ‘-Ppdf’ switch) contain the ‘G’ option for 'character
+shifting'. This option will result in ‘fi’ being rendered as ‘£’
(British Pounds sign) in several fonts, unless your version of Dvips has
a long-standing bug in its implementation fixed (only very recent
versions of Dvips have).
@@ -636,7 +636,7 @@ of the preview package.
In general, you should try to fix the problem in the TeX code, like
avoiding drawing outside of the picture with PSTricks.
- One possible remedy is to set ‘preview-fast-conversion’ to ‘Off’
+ One possible remedy is to set ‘preview-fast-conversion’ to 'Off'
(*note The Emacs interface::). The conversion will take more time, but
will then use the bounding boxes from EPS files generated by Dvips.
@@ -657,8 +657,8 @@ File: preview-latex.info, Node: x-symbol interoperation,
Next: Middle-clicks p
Thanks to the work of Christoph Wedler, starting with version
‘4.0h/beta’ of x-symbol, the line parsing of AUCTeX and preview-latex is
fully supported. Earlier versions exhibit problems. However, versions
-before ‘4.2.2’ will cause a drastic slowdown of preview-latex’s parsing
-pass, so we don’t recommend to use versions earlier than that.
+before ‘4.2.2’ will cause a drastic slowdown of preview-latex's parsing
+pass, so we don't recommend to use versions earlier than that.
If you wonder what x-symbol is, it is a package that transforms
various tokens and subscripts to a more readable form while editing and
@@ -717,15 +717,15 @@ option ‘preview-pdf-adjust-color-method’.
This option is provided for backward compatibility with older gs.
See the below explanation for detail.
- When ‘nil’, no adjustment is done and “black on white” image is
+ When ‘nil’, no adjustment is done and "black on white" image is
generated regardless of Emacs color. This is provided for fallback
for gs 9.27 users with customized foreground color. See the below
explanation for detail.
When the LaTeX command produces PDF rather than DVI and Emacs has
non-trivial foreground color, the traditional method (‘compatible’)
- makes gs >= 9.27 to stop with error. Here, “non-trivial foreground
- color” includes customized themes.
+ makes gs >= 9.27 to stop with error. Here, "non-trivial foreground
+ color" includes customized themes.
If you use such non-trivial foreground color and the version of
Ghostscript equals to 9.27, you have two options:
@@ -734,7 +734,7 @@ option ‘preview-pdf-adjust-color-method’.
color. This makes the generated image almost non-readable on
dark background, so the next option would be your only choice
in that case.
- 2. Choose the value ‘nil’, which forces plain “black on white”
+ 2. Choose the value ‘nil’, which forces plain "black on white"
appearance for the generated image. You can at least read
what are written in the image although they may not match with
your Emacs color well.
@@ -749,8 +749,8 @@ File: preview-latex.info, Node: Black texts are too hard
to read on dark backgr
=======================================================
Unfortunately, foreground color adjustment discussed in the previous
-node doesn’t work for XeLaTeX for technical reason. The texts are
-always rendered as black in the preview images, so it’s almost
+node doesn't work for XeLaTeX for technical reason. The texts are
+always rendered as black in the preview images, so it's almost
impossible to read them on dark background. Hence XeLaTeX users who
like dark background in Emacs frame should customize
‘preview-pdf-adjust-color-method’ to ‘nil’.
@@ -797,14 +797,14 @@ guess the baseline of the resulting code and stuff, but
this is at best
dissatisfactory. The preview package provides an easy way to ensure
that exactly one page per request gets shipped, with a well-defined
baseline and no page decorations. While you still can use the preview
-package with the ‘classic’
+package with the 'classic'
dvips -E -i
-invocation, there are better ways available that don’t rely on Dvips not
+invocation, there are better ways available that don't rely on Dvips not
getting confused by PostScript specials.
- For most applications, you’ll want to make use of the ‘tightpage’
+ For most applications, you'll want to make use of the ‘tightpage’
option. This will embed the page dimensions into the PostScript or PDF
code, obliterating the need to use the ‘-E -i’ options to Dvips. You
can then produce all image files with a single run of Ghostscript from a
@@ -941,13 +941,13 @@ DRIVER
‘showlabels’
During the editing process, some people like to see the label names
in their equations, figures and the like. Now if you are using
- Emacs for editing, and in particular preview-latex, I’d strongly
+ Emacs for editing, and in particular preview-latex, I'd strongly
recommend that you check out the RefTeX package which pretty much
obliterates the need for this kind of functionality. If you still
want it, standard LaTeX provides it with the ‘showkeys’ package,
and there is also the less encompassing ‘showlabels’ package.
Unfortunately, since those go to some pain not to change the page
- layout and spacing, they also don’t change ‘preview’’s idea of the
+ layout and spacing, they also don't change ‘preview’'s idea of the
TeX dimensions of the involved boxes. So if you are using
‘preview’ for determing bounding boxes, those packages are mostly
useless. The option ‘showlabels’ offers a substitute for them.
@@ -987,8 +987,8 @@ DRIVER
If neither ‘dvips’ or ‘pdftex’ have been specified, the
corresponding option will get autodetected and invoked.
- If you need this in a batch environment where you don’t want to use
- ‘preview’’s automatic extraction facilities, no problem: just don’t
+ If you need this in a batch environment where you don't want to use
+ ‘preview’'s automatic extraction facilities, no problem: just don't
use any of the extraction options, and wrap everything to be
previewed into ‘preview’ environments. This is how LyX does its
math previews.
@@ -1013,7 +1013,7 @@ DRIVER
of by register. PostScript points have the unit ‘bp’.
‘lyx’
This option is for the sake of LyX developers. It will output a
- few diagnostics relevant for the sake of LyX’ preview functionality
+ few diagnostics relevant for the sake of LyX' preview functionality
(at the time of writing, mostly implemented for math insets, in
versions of LyX starting with 1.3.0).
‘counters’
@@ -1038,7 +1038,7 @@ and similar to the corresponding TeX commands they allude
to:
‘tracingall’
causes lots of diagnostic output to appear in the log file during
- the preview collecting phases of TeX’s operation. In contrast to
+ the preview collecting phases of TeX's operation. In contrast to
the similarly named TeX command, it will not switch to
‘\errorstopmode’, nor will it change the setting of
‘\tracingonline’.
@@ -1046,7 +1046,7 @@ and similar to the corresponding TeX commands they allude
to:
This option will show the contents of the boxes shipped out to the
DVI files. It also sets ‘\showboxbreadth’ and ‘\showboxdepth’ to
their maximum values at the end of loading this package, but you
- may reset them if you don’t like that.
+ may reset them if you don't like that.
File: preview-latex.info, Node: Provided commands, Prev: Package options,
Up: The LaTeX style file
@@ -1090,7 +1090,7 @@ File: preview-latex.info, Node: Provided commands,
Prev: Package options, Up:
the argument in a ‘[{’ and ‘}]’ pair. The inner braces are
necessary to stop any included ‘[]’ pairs from prematurely ending
the optional argument, and to make a single ‘{}’ denoting an
- optional argument not get stripped away by TeX’s argument parsing.
+ optional argument not get stripped away by TeX's argument parsing.
The letters simply mean
@@ -1131,7 +1131,7 @@ File: preview-latex.info, Node: Provided commands,
Prev: Package options, Up:
users might enjoy this sort of flexibility.
‘:’{ARGUMENT}{REPLACEMENT}
is again a transformation rule. As opposed to ‘#’, however,
- the result of the transformation is parsed again. You’ll
+ the result of the transformation is parsed again. You'll
rarely need this.
There is a second optional argument in brackets that can be used to
@@ -1146,7 +1146,7 @@ File: preview-latex.info, Node: Provided commands,
Prev: Package options, Up:
A similar invocation ‘\PreviewMacro*’ simply throws the macro and
all of its arguments declared in the manner above away. This is
mostly useful for having things like ‘\footnote’ not do their magic
- on their arguments. More often than not, you don’t want to declare
+ on their arguments. More often than not, you don't want to declare
any arguments to scan to ‘\PreviewMacro*’ since you would want the
remaining arguments to be treated as usual text and typeset in that
manner instead of being thrown away. An exception might be, say,
@@ -1264,23 +1264,23 @@ together in making preview-latex work as intended.
commands specified in ‘preview-default-preamble’.
‘preview-fast-conversion’
- This is relevant only for DVI mode. It defaults to ‘On’ and
+ This is relevant only for DVI mode. It defaults to 'On' and
results in the whole document being processed as one large
PostScript file from which the single images are extracted with the
help of parsing the PostScript for use of so-called DSC comments.
The bounding boxes are extracted with the help of TeX instead of
getting them from Dvips. If you are experiencing bounding box
- problems, try setting this option to ‘Off’.
+ problems, try setting this option to 'Off'.
‘preview-prefer-TeX-bb’
- If this option is ‘On’, it tells preview-latex never to try to
+ If this option is 'On', it tells preview-latex never to try to
extract bounding boxes from the bounding box comments of EPS files,
but rather rely on the boxes it gets from TeX. If you activated
‘preview-fast-conversion’, this is done, anyhow, since there are no
EPS files from which to read this information. The option defaults
- to ‘Off’, simply because about the only conceivable reason to
+ to 'Off', simply because about the only conceivable reason to
switch off ‘preview-fast-conversion’ would be that you have some
- bounding box problem and want to get Dvips’ angle on that matter.
+ bounding box problem and want to get Dvips' angle on that matter.
‘preview-scale-function’
‘preview-reference-face’
@@ -1290,7 +1290,7 @@ together in making preview-latex work as intended.
scaled when appearing on the screen. If you specify a numerical
value here, the physical size on the screen will be that of the
original paper output scaled by the specified factor, at least if
- Emacs’ information about screen size and resolution are correct.
+ Emacs' information about screen size and resolution are correct.
The default is to let ‘preview-scale-from-face’ determine the scale
function. This function determines the scale factor by making the
size of the default font in the document match that of the
@@ -1321,7 +1321,7 @@ together in making preview-latex work as intended.
things too large. So better specify those size options even when
you know that LaTeX does not need them: preview-latex might benefit
from them. Another possibility for error is that you have not
- enabled AUCTeX’s document parsing options. The fallback method of
+ enabled AUCTeX's document parsing options. The fallback method of
asking AUCTeX about the size might be disabled in future versions
of preview-latex since in general it is more reliable to get this
information from the LaTeX run itself.
@@ -1414,7 +1414,7 @@ File: preview-latex.info, Node: The preview images,
Next: Misplaced previews,
types as well). You will notice that ‘preview-gs-image-type-alist’
contains an entry for ‘dvipng’: this actually has nothing to with
‘dvipng’ itself but specifies the image type and Ghostscript device
- option to use when ‘dvipng’ can’t be used. This will obviously be
+ option to use when ‘dvipng’ can't be used. This will obviously be
the case for PDF output by PDFLaTeX, but it will also happen if the
DVI file contains PostScript specials in which case the affected
images will get run through Dvips and Ghostscript once ‘dvipng’
@@ -1429,7 +1429,7 @@ File: preview-latex.info, Node: The preview images,
Next: Misplaced previews,
Most interesting to the user perhaps is the setting of this
variable. It contains the default antialiasing settings
‘-dTextAlphaBits=4’ and ‘-dGraphicsAlphaBits=4’. Decreasing those
- values to 2 or 1 might increase Ghostscript’s performance if you
+ values to 2 or 1 might increase Ghostscript's performance if you
find it lacking.
Running and feeding Ghostscript from preview-latex happens
@@ -1449,7 +1449,7 @@ File: preview-latex.info, Node: Misplaced previews,
Prev: The preview images,
If you are reading this section, the first thing is to check that your
problem is not caused by x-symbol in connection with an installation not
supporting 8-bit characters (*note x-symbol interoperation::). If not,
-here’s the beef:
+here's the beef:
As explained previously, Emacs uses pseudo-error messages generated
by the ‘preview’ package in order to pinpoint the exact source location
@@ -1474,7 +1474,7 @@ undesirable.
The solution (like with other preview problems) is to tell the LaTeX
‘preview’ package how to tackle this problem (*note The LaTeX style
-file::). Simply, you don’t need ‘\emph’ do anything at all during
+file::). Simply, you don't need ‘\emph’ do anything at all during
previews! You only want the text math previewed, so the solution is to
use ‘\PreviewMacro*\emph’ in the preamble of your document which will
make LaTeX ignore ‘\emph’ completely as long as it is not part of a
@@ -1522,7 +1522,7 @@ Appendix A ToDo
• Support nested snippets
- Currently you can’t have both a footnote (which gets displayed as
+ Currently you can't have both a footnote (which gets displayed as
just its footnote number) and math inside of a footnote rendered as
an image: such nesting might be achieved by rerunning preview-latex
on the footnote contents when one opens the footnote for editing.
@@ -1557,7 +1557,7 @@ Appendix A ToDo
• Web page work
- Currently, preview-latex’s web page is not structured at all.
+ Currently, preview-latex's web page is not structured at all.
Better navigation would be desirable, as well as separate News and
Errata eye catchers.
@@ -1596,7 +1596,7 @@ Appendix A ToDo
• Pop up relevant online documentation for frequent errors
- A lot of errors are of the “badly configured” variety. Perhaps the
+ A lot of errors are of the "badly configured" variety. Perhaps the
relevant info pages should be delivered in addition to the error
message.
@@ -1693,7 +1693,7 @@ flavors of Unix: we have reports for HP and Solaris.
MacOS Carbon, and preview-latex is working with them, too.
With Windows, both native Emacs and Cygwin Emacs should work.
-However, it is known that MiKTeX (https://miktex.org/) sometimes doesn’t
+However, it is known that MiKTeX (https://miktex.org/) sometimes doesn't
work with preview-latex. In that case, use TeX Live
(https://tug.org/texlive/) instead.
@@ -1779,7 +1779,7 @@ monolithic block by Emacs, one should really restrict
previews to those
elements where the improvement in visual representation more than makes
up for the decreased editability.
-B.4.2 What if I don’t want to change the document?
+B.4.2 What if I don't want to change the document?
--------------------------------------------------
The easiest way is to generate a configuration file in the current
@@ -1802,7 +1802,7 @@ single preview on a page of its own. This only happens
when actual
previews get generated. Now if you want to configure preview-latex in
your document, you need to add your own ‘\usepackage’ call to ‘preview’
so that it will be able to interpret its various definition commands.
-It is an error to add the ‘active’ option to this invocation: you don’t
+It is an error to add the ‘active’ option to this invocation: you don't
want the package to be active unless preview-latex itself enables the
previewing operation (which it will).
@@ -1880,7 +1880,7 @@ B.6 preview-latex when not using LaTeX
B.6.1 Does preview-latex work with PDFLaTeX?
--------------------------------------------
-Yes, as long as you use AUCTeX’s own PDFLaTeX mode and have not messed
+Yes, as long as you use AUCTeX's own PDFLaTeX mode and have not messed
with ‘TeX-command-list’.
B.6.2 Does preview-latex work with ‘elatex’?
@@ -1922,7 +1922,7 @@ Appendix C Copying this Manual
The copyright notice for this manual is:
This manual is for preview-latex, a LaTeX preview mode for AUCTeX
-(version 13.2.2 from 2023-10-11).
+(version 13.2.3 from 2023-12-07).
Copyright © 2001, 2002, 2003, 2004, 2005, 2006, 2017-2019, 2021 Free
Software Foundation, Inc.
@@ -1932,7 +1932,7 @@ Software Foundation, Inc.
Version 1.3 or any later version published by the Free Software
Foundation; with no Invariant Sections, no Front-Cover Texts and no
Back-Cover Texts. A copy of the license is included in the section
- entitled “GNU Free Documentation License.”
+ entitled "GNU Free Documentation License."
The full license text can be read here:
@@ -1964,7 +1964,7 @@ C.1 GNU Free Documentation License
author and publisher a way to get credit for their work, while not
being considered responsible for modifications made by others.
- This License is a kind of “copyleft”, which means that derivative
+ This License is a kind of "copyleft", which means that derivative
works of the document must themselves be free in the same sense.
It complements the GNU General Public License, which is a copyleft
license designed for free software.
@@ -1985,18 +1985,18 @@ C.1 GNU Free Documentation License
be distributed under the terms of this License. Such a notice
grants a world-wide, royalty-free license, unlimited in duration,
to use that work under the conditions stated herein. The
- “Document”, below, refers to any such manual or work. Any member
- of the public is a licensee, and is addressed as “you”. You accept
+ "Document", below, refers to any such manual or work. Any member
+ of the public is a licensee, and is addressed as "you". You accept
the license if you copy, modify or distribute the work in a way
requiring permission under copyright law.
- A “Modified Version” of the Document means any work containing the
+ A "Modified Version" of the Document means any work containing the
Document or a portion of it, either copied verbatim, or with
modifications and/or translated into another language.
- A “Secondary Section” is a named appendix or a front-matter section
+ A "Secondary Section" is a named appendix or a front-matter section
of the Document that deals exclusively with the relationship of the
- publishers or authors of the Document to the Document’s overall
+ publishers or authors of the Document to the Document's overall
subject (or to related matters) and contains nothing that could
fall directly within that overall subject. (Thus, if the Document
is in part a textbook of mathematics, a Secondary Section may not
@@ -2005,7 +2005,7 @@ C.1 GNU Free Documentation License
of legal, commercial, philosophical, ethical or political position
regarding them.
- The “Invariant Sections” are certain Secondary Sections whose
+ The "Invariant Sections" are certain Secondary Sections whose
titles are designated, as being those of Invariant Sections, in the
notice that says that the Document is released under this License.
If a section does not fit the above definition of Secondary then it
@@ -2013,13 +2013,13 @@ C.1 GNU Free Documentation License
contain zero Invariant Sections. If the Document does not identify
any Invariant Sections then there are none.
- The “Cover Texts” are certain short passages of text that are
+ The "Cover Texts" are certain short passages of text that are
listed, as Front-Cover Texts or Back-Cover Texts, in the notice
that says that the Document is released under this License. A
Front-Cover Text may be at most 5 words, and a Back-Cover Text may
be at most 25 words.
- A “Transparent” copy of the Document means a machine-readable copy,
+ A "Transparent" copy of the Document means a machine-readable copy,
represented in a format whose specification is available to the
general public, that is suitable for revising the document
straightforwardly with generic text editors or (for images composed
@@ -2031,7 +2031,7 @@ C.1 GNU Free Documentation License
been arranged to thwart or discourage subsequent modification by
readers is not Transparent. An image format is not Transparent if
used for any substantial amount of text. A copy that is not
- “Transparent” is called “Opaque”.
+ "Transparent" is called "Opaque".
Examples of suitable formats for Transparent copies include plain
ASCII without markup, Texinfo input format, LaTeX input format,
@@ -2044,23 +2044,23 @@ C.1 GNU Free Documentation License
the machine-generated HTML, PostScript or PDF produced by some word
processors for output purposes only.
- The “Title Page” means, for a printed book, the title page itself,
+ The "Title Page" means, for a printed book, the title page itself,
plus such following pages as are needed to hold, legibly, the
material this License requires to appear in the title page. For
- works in formats which do not have any title page as such, “Title
- Page” means the text near the most prominent appearance of the
- work’s title, preceding the beginning of the body of the text.
+ works in formats which do not have any title page as such, "Title
+ Page" means the text near the most prominent appearance of the
+ work's title, preceding the beginning of the body of the text.
- The “publisher” means any person or entity that distributes copies
+ The "publisher" means any person or entity that distributes copies
of the Document to the public.
- A section “Entitled XYZ” means a named subunit of the Document
+ A section "Entitled XYZ" means a named subunit of the Document
whose title either is precisely XYZ or contains XYZ in parentheses
following text that translates XYZ in another language. (Here XYZ
stands for a specific section name mentioned below, such as
- “Acknowledgements”, “Dedications”, “Endorsements”, or “History”.)
- To “Preserve the Title” of such a section when you modify the
- Document means that it remains a section “Entitled XYZ” according
+ "Acknowledgements", "Dedications", "Endorsements", or "History".)
+ To "Preserve the Title" of such a section when you modify the
+ Document means that it remains a section "Entitled XYZ" according
to this definition.
The Document may include Warranty Disclaimers next to the notice
@@ -2090,7 +2090,7 @@ C.1 GNU Free Documentation License
If you publish printed copies (or copies in media that commonly
have printed covers) of the Document, numbering more than 100, and
- the Document’s license notice requires Cover Texts, you must
+ the Document's license notice requires Cover Texts, you must
enclose the copies in covers that carry, clearly and legibly, all
these Cover Texts: Front-Cover Texts on the front cover, and
Back-Cover Texts on the back cover. Both covers must also clearly
@@ -2162,15 +2162,15 @@ C.1 GNU Free Documentation License
the Addendum below.
G. Preserve in that license notice the full lists of Invariant
- Sections and required Cover Texts given in the Document’s
+ Sections and required Cover Texts given in the Document's
license notice.
H. Include an unaltered copy of this License.
- I. Preserve the section Entitled “History”, Preserve its Title,
+ I. Preserve the section Entitled "History", Preserve its Title,
and add to it an item stating at least the title, year, new
authors, and publisher of the Modified Version as given on the
- Title Page. If there is no section Entitled “History” in the
+ Title Page. If there is no section Entitled "History" in the
Document, create one stating the title, year, authors, and
publisher of the Document as given on its Title Page, then add
an item describing the Modified Version as stated in the
@@ -2180,12 +2180,12 @@ C.1 GNU Free Documentation License
for public access to a Transparent copy of the Document, and
likewise the network locations given in the Document for
previous versions it was based on. These may be placed in the
- “History” section. You may omit a network location for a work
+ "History" section. You may omit a network location for a work
that was published at least four years before the Document
itself, or if the original publisher of the version it refers
to gives permission.
- K. For any section Entitled “Acknowledgements” or “Dedications”,
+ K. For any section Entitled "Acknowledgements" or "Dedications",
Preserve the Title of the section, and preserve in the section
all the substance and tone of each of the contributor
acknowledgements and/or dedications given therein.
@@ -2194,11 +2194,11 @@ C.1 GNU Free Documentation License
in their text and in their titles. Section numbers or the
equivalent are not considered part of the section titles.
- M. Delete any section Entitled “Endorsements”. Such a section
+ M. Delete any section Entitled "Endorsements". Such a section
may not be included in the Modified Version.
N. Do not retitle any existing section to be Entitled
- “Endorsements” or to conflict in title with any Invariant
+ "Endorsements" or to conflict in title with any Invariant
Section.
O. Preserve any Warranty Disclaimers.
@@ -2207,15 +2207,15 @@ C.1 GNU Free Documentation License
appendices that qualify as Secondary Sections and contain no
material copied from the Document, you may at your option designate
some or all of these sections as invariant. To do this, add their
- titles to the list of Invariant Sections in the Modified Version’s
+ titles to the list of Invariant Sections in the Modified Version's
license notice. These titles must be distinct from any other
section titles.
- You may add a section Entitled “Endorsements”, provided it contains
+ You may add a section Entitled "Endorsements", provided it contains
nothing but endorsements of your Modified Version by various
- parties—for example, statements of peer review or that the text has
- been approved by an organization as the authoritative definition of
- a standard.
+ parties--for example, statements of peer review or that the text
+ has been approved by an organization as the authoritative
+ definition of a standard.
You may add a passage of up to five words as a Front-Cover Text,
and a passage of up to 25 words as a Back-Cover Text, to the end of
@@ -2253,10 +2253,10 @@ C.1 GNU Free Documentation License
combined work.
In the combination, you must combine any sections Entitled
- “History” in the various original documents, forming one section
- Entitled “History”; likewise combine any sections Entitled
- “Acknowledgements”, and any sections Entitled “Dedications”. You
- must delete all sections Entitled “Endorsements.”
+ "History" in the various original documents, forming one section
+ Entitled "History"; likewise combine any sections Entitled
+ "Acknowledgements", and any sections Entitled "Dedications". You
+ must delete all sections Entitled "Endorsements."
6. COLLECTIONS OF DOCUMENTS
@@ -2277,16 +2277,16 @@ C.1 GNU Free Documentation License
A compilation of the Document or its derivatives with other
separate and independent documents or works, in or on a volume of a
- storage or distribution medium, is called an “aggregate” if the
+ storage or distribution medium, is called an "aggregate" if the
copyright resulting from the compilation is not used to limit the
- legal rights of the compilation’s users beyond what the individual
+ legal rights of the compilation's users beyond what the individual
works permit. When the Document is included in an aggregate, this
License does not apply to the other works in the aggregate which
are not themselves derivative works of the Document.
If the Cover Text requirement of section 3 is applicable to these
copies of the Document, then if the Document is less than one half
- of the entire aggregate, the Document’s Cover Texts may be placed
+ of the entire aggregate, the Document's Cover Texts may be placed
on covers that bracket the Document within the aggregate, or the
electronic equivalent of covers if the Document is in electronic
form. Otherwise they must appear on printed covers that bracket
@@ -2308,8 +2308,8 @@ C.1 GNU Free Documentation License
this License or a notice or disclaimer, the original version will
prevail.
- If a section in the Document is Entitled “Acknowledgements”,
- “Dedications”, or “History”, the requirement (section 4) to
+ If a section in the Document is Entitled "Acknowledgements",
+ "Dedications", or "History", the requirement (section 4) to
Preserve its Title (section 1) will typically require changing the
actual title.
@@ -2350,7 +2350,7 @@ C.1 GNU Free Documentation License
Each version of the License is given a distinguishing version
number. If the Document specifies that a particular numbered
- version of this License “or any later version” applies to it, you
+ version of this License "or any later version" applies to it, you
have the option of following the terms and conditions either of
that specified version or of any later version that has been
published (not as a draft) by the Free Software Foundation. If the
@@ -2358,29 +2358,29 @@ C.1 GNU Free Documentation License
choose any version ever published (not as a draft) by the Free
Software Foundation. If the Document specifies that a proxy can
decide which future versions of this License can be used, that
- proxy’s public statement of acceptance of a version permanently
+ proxy's public statement of acceptance of a version permanently
authorizes you to choose that version for the Document.
11. RELICENSING
- “Massive Multiauthor Collaboration Site” (or “MMC Site”) means any
+ "Massive Multiauthor Collaboration Site" (or "MMC Site") means any
World Wide Web server that publishes copyrightable works and also
provides prominent facilities for anybody to edit those works. A
public wiki that anybody can edit is an example of such a server.
- A “Massive Multiauthor Collaboration” (or “MMC”) contained in the
+ A "Massive Multiauthor Collaboration" (or "MMC") contained in the
site means any set of copyrightable works thus published on the MMC
site.
- “CC-BY-SA” means the Creative Commons Attribution-Share Alike 3.0
+ "CC-BY-SA" means the Creative Commons Attribution-Share Alike 3.0
license published by Creative Commons Corporation, a not-for-profit
corporation with a principal place of business in San Francisco,
California, as well as future copyleft versions of that license
published by that same organization.
- “Incorporate” means to publish or republish a Document, in whole or
+ "Incorporate" means to publish or republish a Document, in whole or
in part, as part of another Document.
- An MMC is “eligible for relicensing” if it is licensed under this
+ An MMC is "eligible for relicensing" if it is licensed under this
License, and if all works that were first published under this
License somewhere other than this MMC, and subsequently
incorporated in whole or in part into the MMC, (1) had no cover
@@ -2407,7 +2407,7 @@ notices just after the title page:
Free Documentation License''.
If you have Invariant Sections, Front-Cover Texts and Back-Cover
-Texts, replace the “with...Texts.” line with this:
+Texts, replace the "with...Texts." line with this:
with the Invariant Sections being LIST THEIR TITLES, with
the Front-Cover Texts being LIST, and with the Back-Cover Texts
@@ -2550,44 +2550,44 @@ Index
Tag Table:
-Node: Top964
-Node: Copying2244
-Node: Introduction2698
-Node: What use is it?3372
-Node: Activating preview-latex4769
-Node: Getting started5534
-Node: Basic modes of operation7521
-Node: More documentation8754
-Node: Availability9643
-Node: Contacts10370
-Node: Installation11659
-Node: Keys and lisp11860
-Node: Simple customization19139
-Node: Known problems24963
-Node: Font problems with Dvips25849
-Node: Too small bounding boxes27059
-Node: x-symbol interoperation28483
-Node: Middle-clicks paste instead of toggling29907
-Node: No images are displayed with gs 9.27 and earlier30604
-Node: Black texts are too hard to read on dark background33362
-Node: For advanced users34019
-Node: The LaTeX style file34478
-Node: Package options37064
-Node: Provided commands48290
-Node: The Emacs interface55897
-Node: The preview images64861
-Node: Misplaced previews68746
-Node: ToDo72274
-Node: Frequently Asked Questions77111
-Node: Introduction to FAQ77434
-Node: Requirements77773
-Node: Installation Trouble79759
-Node: Customization82051
-Node: Troubleshooting85179
-Node: Other formats87693
-Node: Copying this Manual89042
-Node: GNU Free Documentation License89991
-Node: Index115318
+Node: Top958
+Node: Copying2238
+Node: Introduction2692
+Node: What use is it?3366
+Node: Activating preview-latex4759
+Node: Getting started5514
+Node: Basic modes of operation7497
+Node: More documentation8726
+Node: Availability9615
+Node: Contacts10342
+Node: Installation11623
+Node: Keys and lisp11824
+Node: Simple customization19095
+Node: Known problems24915
+Node: Font problems with Dvips25801
+Node: Too small bounding boxes27007
+Node: x-symbol interoperation28427
+Node: Middle-clicks paste instead of toggling29847
+Node: No images are displayed with gs 9.27 and earlier30544
+Node: Black texts are too hard to read on dark background33290
+Node: For advanced users33943
+Node: The LaTeX style file34402
+Node: Package options36980
+Node: Provided commands48188
+Node: The Emacs interface55789
+Node: The preview images64731
+Node: Misplaced previews68612
+Node: ToDo72136
+Node: Frequently Asked Questions76965
+Node: Introduction to FAQ77288
+Node: Requirements77627
+Node: Installation Trouble79611
+Node: Customization81903
+Node: Troubleshooting85027
+Node: Other formats87541
+Node: Copying this Manual88888
+Node: GNU Free Documentation License89833
+Node: Index114959
End Tag Table
diff --git a/tex-site.el b/tex-site.el
index 8e4f035001..19cfc9b850 100644
--- a/tex-site.el
+++ b/tex-site.el
@@ -129,11 +129,11 @@ set it with `TeX-modes-set'."
:set #'TeX-modes-set
:initialize #'custom-initialize-reset)
-(defconst AUCTeX-version "13.2.2"
+(defconst AUCTeX-version "13.2.3"
"AUCTeX version.
If not a regular release, the date of the last change.")
-(defconst AUCTeX-date "2023-10-11"
+(defconst AUCTeX-date "2023-12-07"
"AUCTeX release date using the ISO 8601 format, yyyy-mm-dd.")
;; Store bibitems when saving a BibTeX buffer
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [elpa] externals/auctex ef2999e6d7: Release GNU AUCTeX 13.2.3,
Tassilo Horn <=