[Automake-commit] [SCM] GNU Automake branch, master, updated. Release-1-10-198-g9c0bda6

[Ralf Wildenhues]

This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "GNU Automake".

http://git.sv.gnu.org/gitweb/?p=automake.git;a=commitdiff;h=9c0bda6240dce5262fc4b4b28b26db8cd840cd57

The branch, master has been updated
       via  9c0bda6240dce5262fc4b4b28b26db8cd840cd57 (commit)
      from  e7af73ee9a7f85eb5c7672d6ee61ced6bdb10f95 (commit)

Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.

- Log -----------------------------------------------------------------
commit 9c0bda6240dce5262fc4b4b28b26db8cd840cd57
Author: Ralf Wildenhues <address@hidden>
Date:   Sun Oct 12 22:22:39 2008 +0200

    Nicer 'make dist' output.
    
    * lib/am/distdir.am (distdir): Hide the complex script
    used for computing the relative subdirs; echo the sub-make
    command.
    
    Signed-off-by: Ralf Wildenhues <address@hidden>

-----------------------------------------------------------------------

Summary of changes:
 ChangeLog                |    7 +++++++
 Makefile.in              |    4 +++-
 lib/Automake/Makefile.in |    4 +++-
 lib/Makefile.in          |    4 +++-
 lib/am/distdir.am        |    4 +++-
 5 files changed, 19 insertions(+), 4 deletions(-)

diff --git a/ChangeLog b/ChangeLog
index 3dfadc6..946aef7 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,10 @@
+2008-10-12  Ralf Wildenhues  <address@hidden>
+
+       Nicer 'make dist' output.
+       * lib/am/distdir.am (distdir): Hide the complex script
+       used for computing the relative subdirs; echo the sub-make
+       command.
+
 2008-10-12  William Pursell <address@hidden>  (tiny patch)
 
        * tests/defs.in: Fix comment typo.
diff --git a/Makefile.in b/Makefile.in
index c2f4870..4215572 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -485,7 +485,7 @@ distdir: $(DISTFILES)
            || exit 1; \
          fi; \
        done
-       list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+       @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
          if test "$$subdir" = .; then :; else \
            test -d "$(distdir)/$$subdir" \
            || $(MKDIR_P) "$(distdir)/$$subdir" \
@@ -496,6 +496,8 @@ distdir: $(DISTFILES)
            dir1=$$subdir; dir2="$(top_distdir)"; \
            $(am__relativize); \
            new_top_distdir=$$reldir; \
+           echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) 
top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+           echo "     am__remove_distdir=: am__skip_length_check=: distdir)"; \
            ($(am__cd) $$subdir && \
              $(MAKE) $(AM_MAKEFLAGS) \
                top_distdir="$$new_top_distdir" \
diff --git a/lib/Automake/Makefile.in b/lib/Automake/Makefile.in
index 7a20ca3..c74094b 100644
--- a/lib/Automake/Makefile.in
+++ b/lib/Automake/Makefile.in
@@ -468,7 +468,7 @@ distdir: $(DISTFILES)
            || exit 1; \
          fi; \
        done
-       list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+       @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
          if test "$$subdir" = .; then :; else \
            test -d "$(distdir)/$$subdir" \
            || $(MKDIR_P) "$(distdir)/$$subdir" \
@@ -479,6 +479,8 @@ distdir: $(DISTFILES)
            dir1=$$subdir; dir2="$(top_distdir)"; \
            $(am__relativize); \
            new_top_distdir=$$reldir; \
+           echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) 
top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+           echo "     am__remove_distdir=: am__skip_length_check=: distdir)"; \
            ($(am__cd) $$subdir && \
              $(MAKE) $(AM_MAKEFLAGS) \
                top_distdir="$$new_top_distdir" \
diff --git a/lib/Makefile.in b/lib/Makefile.in
index 2ecc780..00e358b 100644
--- a/lib/Makefile.in
+++ b/lib/Makefile.in
@@ -444,7 +444,7 @@ distdir: $(DISTFILES)
            || exit 1; \
          fi; \
        done
-       list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+       @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
          if test "$$subdir" = .; then :; else \
            test -d "$(distdir)/$$subdir" \
            || $(MKDIR_P) "$(distdir)/$$subdir" \
@@ -455,6 +455,8 @@ distdir: $(DISTFILES)
            dir1=$$subdir; dir2="$(top_distdir)"; \
            $(am__relativize); \
            new_top_distdir=$$reldir; \
+           echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) 
top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+           echo "     am__remove_distdir=: am__skip_length_check=: distdir)"; \
            ($(am__cd) $$subdir && \
              $(MAKE) $(AM_MAKEFLAGS) \
                top_distdir="$$new_top_distdir" \
diff --git a/lib/am/distdir.am b/lib/am/distdir.am
index 41e9b2b..6f48293 100644
--- a/lib/am/distdir.am
+++ b/lib/am/distdir.am
@@ -195,7 +195,7 @@ endif %?TOPDIR_P%
 ## us work correctly with an enclosing package.
 ##
 if %?SUBDIRS%
-       list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+       @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
          if test "$$subdir" = .; then :; else \
            test -d "$(distdir)/$$subdir" \
            || $(MKDIR_P) "$(distdir)/$$subdir" \
@@ -206,6 +206,8 @@ if %?SUBDIRS%
            dir1=$$subdir; dir2="$(top_distdir)"; \
            $(am__relativize); \
            new_top_distdir=$$reldir; \
+           echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) 
top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+           echo "     am__remove_distdir=: am__skip_length_check=: distdir)"; \
            ($(am__cd) $$subdir && \
              $(MAKE) $(AM_MAKEFLAGS) \
                top_distdir="$$new_top_distdir" \


hooks/post-receive
--
GNU Automake