[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Automake-commit] [SCM] GNU Automake branch, branch-1-10, updated. Relea
|
From: |
Ralf Wildenhues |
|
Subject: |
[Automake-commit] [SCM] GNU Automake branch, branch-1-10, updated. Release-1-10-1-49-gff7965d |
|
Date: |
Tue, 11 Nov 2008 06:14:33 +0000 |
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "GNU Automake".
http://git.sv.gnu.org/gitweb/?p=automake.git;a=commitdiff;h=ff7965dcd1a21bb3155f387e9c4efe0ee21703ea
The branch, branch-1-10 has been updated
via ff7965dcd1a21bb3155f387e9c4efe0ee21703ea (commit)
from 41c184262d317edfb9734c0b7f1102e78f1c8a42 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
commit ff7965dcd1a21bb3155f387e9c4efe0ee21703ea
Author: Ralf Wildenhues <address@hidden>
Date: Tue Nov 11 07:10:30 2008 +0100
Sync auxiliary files from upstream.
* INSTALL, lib/INSTALL, lib/config.guess, lib/config.sub,
lib/texinfo.tex: Sync from upstream.
Signed-off-by: Ralf Wildenhues <address@hidden>
-----------------------------------------------------------------------
Summary of changes:
ChangeLog | 5 +
INSTALL | 94 ++++++++++++++++++-----
lib/INSTALL | 94 ++++++++++++++++++-----
lib/config.guess | 10 +-
lib/config.sub | 27 +++++--
lib/texinfo.tex | 216 ++++++++++++++++++++++++++++++++++++++----------------
6 files changed, 333 insertions(+), 113 deletions(-)
diff --git a/ChangeLog b/ChangeLog
index 8124f57..8fb8022 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,8 @@
+2008-11-11 Ralf Wildenhues <address@hidden>
+
+ * INSTALL, lib/INSTALL, lib/config.guess, lib/config.sub,
+ lib/texinfo.tex: Sync from upstream.
+
2008-11-10 Ralf Wildenhues <address@hidden>
Update to GFDL 1.3.
diff --git a/INSTALL b/INSTALL
index d3c5b40..8b82ade 100644
--- a/INSTALL
+++ b/INSTALL
@@ -2,15 +2,15 @@ Installation Instructions
*************************
Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
-2006, 2007 Free Software Foundation, Inc.
+2006, 2007, 2008 Free Software Foundation, Inc.
-This file is free documentation; the Free Software Foundation gives
+ This file is free documentation; the Free Software Foundation gives
unlimited permission to copy, distribute and modify it.
Basic Installation
==================
-Briefly, the shell commands `./configure; make; make install' should
+ Briefly, the shell commands `./configure; make; make install' should
configure, build, and install this package. The following
more-detailed instructions are generic; see the `README' file for
instructions specific to this package.
@@ -73,9 +73,9 @@ The simplest way to compile this package is:
Compilers and Options
=====================
-Some systems require unusual options for compilation or linking that the
-`configure' script does not know about. Run `./configure --help' for
-details on some of the pertinent environment variables.
+ Some systems require unusual options for compilation or linking that
+the `configure' script does not know about. Run `./configure --help'
+for details on some of the pertinent environment variables.
You can give `configure' initial values for configuration parameters
by setting variables in the command line or in the environment. Here
@@ -88,7 +88,7 @@ is an example:
Compiling For Multiple Architectures
====================================
-You can compile the package for more than one kind of computer at the
+ You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
own directory. To do this, you can use GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
@@ -100,10 +100,24 @@ architecture at a time in the source code directory.
After you have
installed the package for one architecture, use `make distclean' before
reconfiguring for another architecture.
+ On MacOS X 10.5 and later systems, you can create libraries and
+executables that work on multiple system types--known as "fat" or
+"universal" binaries--by specifying multiple `-arch' options to the
+compiler but only a single `-arch' option to the preprocessor. Like
+this:
+
+ ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CPP="gcc -E" CXXCPP="g++ -E"
+
+ This is not guaranteed to produce working output in all cases, you
+may have to build one architecture at a time and combine the results
+using the `lipo' tool if you have problems.
+
Installation Names
==================
-By default, `make install' installs the package's commands under
+ By default, `make install' installs the package's commands under
`/usr/local/bin', include files under `/usr/local/include', etc. You
can specify an installation prefix other than `/usr/local' by giving
`configure' the option `--prefix=PREFIX'.
@@ -126,7 +140,7 @@ option `--program-prefix=PREFIX' or
`--program-suffix=SUFFIX'.
Optional Features
=================
-Some packages pay attention to `--enable-FEATURE' options to
+ Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The
@@ -138,14 +152,36 @@ find the X include and library files automatically, but
if it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.
+Particular systems
+==================
+
+ On HP-UX, the default C compiler is not ANSI C compatible. If GNU
+CC is not installed, it is recommended to use the following options in
+order to use an ANSI C compiler:
+
+ ./configure CC="cc -Ae"
+
+and if that doesn't work, install pre-built binaries of GCC for HP-UX.
+
+ On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
+parse its `<wchar.h>' header file. The option `-nodtk' can be used as
+a workaround. If GNU CC is not installed, it is therefore recommended
+to try
+
+ ./configure CC="cc"
+
+and if that doesn't work, try
+
+ ./configure CC="cc -nodtk"
+
Specifying the System Type
==========================
-There may be some features `configure' cannot figure out automatically,
-but needs to determine by the type of machine the package will run on.
-Usually, assuming the package is built to be run on the _same_
-architectures, `configure' can figure that out, but if it prints a
-message saying it cannot guess the machine type, give it the
+ There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on. Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
`--build=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name which has the form:
@@ -171,9 +207,9 @@ eventually be run) with `--host=TYPE'.
Sharing Defaults
================
-If you want to set default values for `configure' scripts to share, you
-can create a site shell script called `config.site' that gives default
-values for variables like `CC', `cache_file', and `prefix'.
+ If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
@@ -182,7 +218,7 @@ A warning: not all `configure' scripts look for a site
script.
Defining Variables
==================
-Variables not defined in a site shell script can be set in the
+ Variables not defined in a site shell script can be set in the
environment passed to `configure'. However, some packages may run
configure again during the build, and the customized values of these
variables may be lost. In order to avoid this problem, you should set
@@ -201,11 +237,19 @@ an Autoconf bug. Until the bug is fixed you can use this
workaround:
`configure' Invocation
======================
-`configure' recognizes the following options to control how it operates.
+ `configure' recognizes the following options to control how it
+operates.
`--help'
`-h'
- Print a summary of the options to `configure', and exit.
+ Print a summary of all of the options to `configure', and exit.
+
+`--help=short'
+`--help=recursive'
+ Print a summary of the options unique to this package's
+ `configure', and exit. The `short' variant lists options used
+ only in the top level, while the `recursive' variant lists options
+ also present in any nested packages.
`--version'
`-V'
@@ -232,6 +276,16 @@ an Autoconf bug. Until the bug is fixed you can use this
workaround:
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.
+`--prefix=DIR'
+ Use DIR as the installation prefix. *Note Installation Names::
+ for more details, including other options available for fine-tuning
+ the installation locations.
+
+`--no-create'
+`-n'
+ Run the configure checks, but stop before creating any output
+ files.
+
`configure' also accepts some other, not widely useful, options. Run
`configure --help' for more details.
diff --git a/lib/INSTALL b/lib/INSTALL
index d3c5b40..8b82ade 100644
--- a/lib/INSTALL
+++ b/lib/INSTALL
@@ -2,15 +2,15 @@ Installation Instructions
*************************
Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
-2006, 2007 Free Software Foundation, Inc.
+2006, 2007, 2008 Free Software Foundation, Inc.
-This file is free documentation; the Free Software Foundation gives
+ This file is free documentation; the Free Software Foundation gives
unlimited permission to copy, distribute and modify it.
Basic Installation
==================
-Briefly, the shell commands `./configure; make; make install' should
+ Briefly, the shell commands `./configure; make; make install' should
configure, build, and install this package. The following
more-detailed instructions are generic; see the `README' file for
instructions specific to this package.
@@ -73,9 +73,9 @@ The simplest way to compile this package is:
Compilers and Options
=====================
-Some systems require unusual options for compilation or linking that the
-`configure' script does not know about. Run `./configure --help' for
-details on some of the pertinent environment variables.
+ Some systems require unusual options for compilation or linking that
+the `configure' script does not know about. Run `./configure --help'
+for details on some of the pertinent environment variables.
You can give `configure' initial values for configuration parameters
by setting variables in the command line or in the environment. Here
@@ -88,7 +88,7 @@ is an example:
Compiling For Multiple Architectures
====================================
-You can compile the package for more than one kind of computer at the
+ You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
own directory. To do this, you can use GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
@@ -100,10 +100,24 @@ architecture at a time in the source code directory.
After you have
installed the package for one architecture, use `make distclean' before
reconfiguring for another architecture.
+ On MacOS X 10.5 and later systems, you can create libraries and
+executables that work on multiple system types--known as "fat" or
+"universal" binaries--by specifying multiple `-arch' options to the
+compiler but only a single `-arch' option to the preprocessor. Like
+this:
+
+ ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CPP="gcc -E" CXXCPP="g++ -E"
+
+ This is not guaranteed to produce working output in all cases, you
+may have to build one architecture at a time and combine the results
+using the `lipo' tool if you have problems.
+
Installation Names
==================
-By default, `make install' installs the package's commands under
+ By default, `make install' installs the package's commands under
`/usr/local/bin', include files under `/usr/local/include', etc. You
can specify an installation prefix other than `/usr/local' by giving
`configure' the option `--prefix=PREFIX'.
@@ -126,7 +140,7 @@ option `--program-prefix=PREFIX' or
`--program-suffix=SUFFIX'.
Optional Features
=================
-Some packages pay attention to `--enable-FEATURE' options to
+ Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The
@@ -138,14 +152,36 @@ find the X include and library files automatically, but
if it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.
+Particular systems
+==================
+
+ On HP-UX, the default C compiler is not ANSI C compatible. If GNU
+CC is not installed, it is recommended to use the following options in
+order to use an ANSI C compiler:
+
+ ./configure CC="cc -Ae"
+
+and if that doesn't work, install pre-built binaries of GCC for HP-UX.
+
+ On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
+parse its `<wchar.h>' header file. The option `-nodtk' can be used as
+a workaround. If GNU CC is not installed, it is therefore recommended
+to try
+
+ ./configure CC="cc"
+
+and if that doesn't work, try
+
+ ./configure CC="cc -nodtk"
+
Specifying the System Type
==========================
-There may be some features `configure' cannot figure out automatically,
-but needs to determine by the type of machine the package will run on.
-Usually, assuming the package is built to be run on the _same_
-architectures, `configure' can figure that out, but if it prints a
-message saying it cannot guess the machine type, give it the
+ There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on. Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
`--build=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name which has the form:
@@ -171,9 +207,9 @@ eventually be run) with `--host=TYPE'.
Sharing Defaults
================
-If you want to set default values for `configure' scripts to share, you
-can create a site shell script called `config.site' that gives default
-values for variables like `CC', `cache_file', and `prefix'.
+ If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
@@ -182,7 +218,7 @@ A warning: not all `configure' scripts look for a site
script.
Defining Variables
==================
-Variables not defined in a site shell script can be set in the
+ Variables not defined in a site shell script can be set in the
environment passed to `configure'. However, some packages may run
configure again during the build, and the customized values of these
variables may be lost. In order to avoid this problem, you should set
@@ -201,11 +237,19 @@ an Autoconf bug. Until the bug is fixed you can use this
workaround:
`configure' Invocation
======================
-`configure' recognizes the following options to control how it operates.
+ `configure' recognizes the following options to control how it
+operates.
`--help'
`-h'
- Print a summary of the options to `configure', and exit.
+ Print a summary of all of the options to `configure', and exit.
+
+`--help=short'
+`--help=recursive'
+ Print a summary of the options unique to this package's
+ `configure', and exit. The `short' variant lists options used
+ only in the top level, while the `recursive' variant lists options
+ also present in any nested packages.
`--version'
`-V'
@@ -232,6 +276,16 @@ an Autoconf bug. Until the bug is fixed you can use this
workaround:
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.
+`--prefix=DIR'
+ Use DIR as the installation prefix. *Note Installation Names::
+ for more details, including other options available for fine-tuning
+ the installation locations.
+
+`--no-create'
+`-n'
+ Run the configure checks, but stop before creating any output
+ files.
+
`configure' also accepts some other, not widely useful, options. Run
`configure --help' for more details.
diff --git a/lib/config.guess b/lib/config.guess
index 6603908..f0f0d36 100755
--- a/lib/config.guess
+++ b/lib/config.guess
@@ -4,7 +4,7 @@
# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
# Free Software Foundation, Inc.
-timestamp='2008-03-12'
+timestamp='2008-09-28'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
@@ -796,7 +796,7 @@ EOF
x86)
echo i586-pc-interix${UNAME_RELEASE}
exit ;;
- EM64T | authenticamd)
+ EM64T | authenticamd | genuineintel)
echo x86_64-unknown-interix${UNAME_RELEASE}
exit ;;
IA64)
@@ -935,6 +935,9 @@ EOF
if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
exit ;;
+ padre:Linux:*:*)
+ echo sparc-unknown-linux-gnu
+ exit ;;
parisc:Linux:*:* | hppa:Linux:*:*)
# Look for CPU level
case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
@@ -985,9 +988,6 @@ EOF
a.out-i386-linux)
echo "${UNAME_MACHINE}-pc-linux-gnuaout"
exit ;;
- coff-i386)
- echo "${UNAME_MACHINE}-pc-linux-gnucoff"
- exit ;;
"")
# Either a pre-BFD a.out linker (linux-gnuoldld) or
# one that does not give us useful --help.
diff --git a/lib/config.sub b/lib/config.sub
index 0f295d9..053e738 100755
--- a/lib/config.sub
+++ b/lib/config.sub
@@ -4,7 +4,7 @@
# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
# Free Software Foundation, Inc.
-timestamp='2008-03-08'
+timestamp='2008-09-08'
# This file is (in principle) common to ALL GNU software.
# The presence of a machine in this file suggests that SOME GNU software
@@ -250,7 +250,7 @@ case $basic_machine in
| i370 | i860 | i960 | ia64 \
| ip2k | iq2000 \
| m32c | m32r | m32rle | m68000 | m68k | m88k \
- | maxq | mb | microblaze | mcore | mep \
+ | maxq | mb | microblaze | mcore | mep | metag \
| mips | mipsbe | mipseb | mipsel | mipsle \
| mips16 \
| mips64 | mips64el \
@@ -288,7 +288,7 @@ case $basic_machine in
| v850 | v850e \
| we32k \
| x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
- | z8k)
+ | z8k | z80)
basic_machine=$basic_machine-unknown
;;
m6811 | m68hc11 | m6812 | m68hc12)
@@ -333,7 +333,7 @@ case $basic_machine in
| ip2k-* | iq2000-* \
| m32c-* | m32r-* | m32rle-* \
| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
- | m88110-* | m88k-* | maxq-* | mcore-* \
+ | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \
| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
| mips16-* \
| mips64-* | mips64el-* \
@@ -375,7 +375,7 @@ case $basic_machine in
| x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
| xstormy16-* | xtensa*-* \
| ymp-* \
- | z8k-*)
+ | z8k-* | z80-*)
;;
# Recognize the basic CPU types without company name, with glob match.
xtensa*)
@@ -463,6 +463,10 @@ case $basic_machine in
basic_machine=c90-cray
os=-unicos
;;
+ cegcc)
+ basic_machine=arm-unknown
+ os=-cegcc
+ ;;
convex-c1)
basic_machine=c1-convex
os=-bsd
@@ -530,6 +534,10 @@ case $basic_machine in
basic_machine=m88k-motorola
os=-sysv3
;;
+ dicos)
+ basic_machine=i686-pc
+ os=-dicos
+ ;;
djgpp)
basic_machine=i586-pc
os=-msdosdjgpp
@@ -1132,6 +1140,10 @@ case $basic_machine in
basic_machine=z8k-unknown
os=-sim
;;
+ z80-*-coff)
+ basic_machine=z80-unknown
+ os=-sim
+ ;;
none)
basic_machine=none-none
os=-none
@@ -1252,7 +1264,7 @@ case $os in
| -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
| -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
| -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
- | -chorusos* | -chorusrdb* \
+ | -chorusos* | -chorusrdb* | -cegcc* \
| -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
| -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
| -uxpv* | -beos* | -mpeix* | -udk* \
@@ -1392,6 +1404,9 @@ case $os in
-zvmoe)
os=-zvmoe
;;
+ -dicos*)
+ os=-dicos
+ ;;
-none)
;;
*)
diff --git a/lib/texinfo.tex b/lib/texinfo.tex
index e4f38dd..fb83ce5 100644
--- a/lib/texinfo.tex
+++ b/lib/texinfo.tex
@@ -3,7 +3,7 @@
% Load plain if necessary, i.e., if running under initex.
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
%
-\def\texinfoversion{2008-03-17.10}
+\def\texinfoversion{2008-11-09.14}
%
% Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
@@ -461,7 +461,7 @@
\def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm}
\def\argremovec#1\c#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm}
-% Each occurence of `\^^M' or `<space>\^^M' is replaced by a single space.
+% Each occurrence of `\^^M' or `<space>\^^M' is replaced by a single space.
%
% \argremovec might leave us with trailing space, e.g.,
% @end itemize @c foo
@@ -486,7 +486,7 @@
% to get _exactly_ the rest of the line, we had to prevent such situation.
% We prepended an \empty token at the very beginning and we expand it now,
% just before passing the control to \argtorun.
-% (Similarily, we have to think about #3 of \argcheckspacesY above: it is
+% (Similarly, we have to think about #3 of \argcheckspacesY above: it is
% either the null string, or it ends with \^^M---thus there is no danger
% that a pair of braces would be stripped.
%
@@ -543,12 +543,12 @@
% used to check whether the current environment is the one expected.
%
% Non-false conditionals (@iftex, @ifset) don't fit into this, so they
-% are not treated as enviroments; they don't open a group. (The
+% are not treated as environments; they don't open a group. (The
% implementation of @end takes care not to call \endgroup in this
% special case.)
-% At runtime, environments start with this:
+% At run-time, environments start with this:
\def\startenvironment#1{\begingroup\def\thisenv{#1}}
% initialize
\let\thisenv\empty
@@ -566,7 +566,7 @@
\fi
}
-% Evironment mismatch, #1 expected:
+% Environment mismatch, #1 expected:
\def\badenverr{%
\errhelp = \EMsimple
\errmessage{This command can appear only \inenvironment\temp,
@@ -650,8 +650,8 @@
\def\jmacro{j}
\def\dotless#1{%
\def\temp{#1}%
- \ifx\temp\imacro \ptexi
- \else\ifx\temp\jmacro \j
+ \ifx\temp\imacro \ifmmode\imath \else\ptexi \fi
+ \else\ifx\temp\jmacro \ifmmode\jmath \else\j \fi
\else address@hidden can be used only with i or j}%
\fi\fi
}
@@ -924,8 +924,9 @@ where each line of input produces a line of output.}
\pushthisfilestack
\def\thisfile{#1}%
{%
- \makevalueexpandable % we want to expand any @value in FILE.
+ \makevalueexpandable % we want to expand any @value in FILE.
\turnoffactive % and allow special characters in the expansion
+ \indexnofonts % Allow `@@' and other weird things in file names.
\edef\temp{\noexpand\input #1 }%
%
% This trickery is to read FILE outside of a group, in case it makes
@@ -1119,6 +1120,16 @@ where each line of input produces a line of output.}
\mathunderscore
\let\\ = \mathbackslash
\mathactive
+ % make the texinfo accent commands work in math mode
+ \let\"=\ddot
+ \let\'=\acute
+ \let\==\bar
+ \let\^=\hat
+ \let\`=\grave
+ \let\u=\breve
+ \let\v=\check
+ \let\~=\tilde
+ \let\dotaccent=\dot
$\finishmath
}
\def\finishmath#1{#1$\endgroup} % Close the group opened by \tex.
@@ -1140,9 +1151,11 @@ where each line of input produces a line of output.}
}
}
-% @bullet and @minus need the same treatment as @math, just above.
+% Some math mode symbols.
\def\bullet{$\ptexbullet$}
-\def\minus{$-$}
+\def\geq{\ifmmode \ge\else $\ge$\fi}
+\def\leq{\ifmmode \le\else $\le$\fi}
+\def\minus{\ifmmode -\else $-$\fi}
% @dots{} outputs an ellipsis using the current font.
% We do .5em per period so that it has the same spacing in the cm
@@ -1367,8 +1380,11 @@ output) for that.)}
\openin 1 #1.jpeg \ifeof 1
\openin 1 #1.JPG \ifeof 1
\openin 1 #1.pdf \ifeof 1
- \errhelp = \nopdfimagehelp
- \errmessage{Could not find image file #1 for pdf}%
+ \openin 1 #1.PDF \ifeof 1
+ \errhelp = \nopdfimagehelp
+ \errmessage{Could not find image file #1 for pdf}%
+ \else \gdef\pdfimgext{PDF}%
+ \fi
\else \gdef\pdfimgext{pdf}%
\fi
\else \gdef\pdfimgext{JPG}%
@@ -1382,7 +1398,7 @@ output) for that.)}
\closein 1
\endgroup
%
- % without \immediate, pdftex seg faults when the same image is
+ % without \immediate, ancient pdftex seg faults when the same image is
% included twice. (Version 3.14159-pre-1.0-unofficial-20010704.)
\ifnum\pdftexversion < 14
\immediate\pdfimage
@@ -1612,6 +1628,10 @@ output) for that.)}
\def\bf{\fam=\bffam \setfontstyle{bf}}\def\bfstylename{bf}
\def\tt{\fam=\ttfam \setfontstyle{tt}}
+% Unfortunately, we have to override this for titles and the like, since
+% in those cases "rm" is bold. Sigh.
+\def\rmisbold{\rm\def\curfontstyle{bf}}
+
% Texinfo sort of supports the sans serif font style, which plain TeX does not.
% So we set up a \sf.
\newfam\sffam
@@ -2009,8 +2029,6 @@ end
\setfont\titlesc\scbshape{10}{\magstep4}{OT1}
\font\titlei=cmmi12 scaled \magstep3
\font\titlesy=cmsy10 scaled \magstep4
-\def\authorrm{\secrm}
-\def\authortt{\sectt}
\def\titleecsize{2074}
% Chapter (and unnumbered) fonts (17.28pt).
@@ -2142,8 +2160,6 @@ end
\setfont\titlesc\scbshape{10}{\magstep4}{OT1}
\font\titlei=cmmi12 scaled \magstep3
\font\titlesy=cmsy10 scaled \magstep4
-\def\authorrm{\secrm}
-\def\authortt{\sectt}
\def\titleecsize{2074}
% Chapter fonts (14.4pt).
@@ -2275,7 +2291,7 @@ end
\def\curfontsize{title}%
\def\lsize{chap}\def\lllsize{subsec}%
\resetmathfonts \setleading{25pt}}
-\def\titlefont#1{{\titlefonts\rm #1}}
+\def\titlefont#1{{\titlefonts\rmisbold #1}}
\def\chapfonts{%
\let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl
\let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc
@@ -2474,6 +2490,7 @@ end
{
\catcode`\-=\active \catcode`\_=\active
\catcode`\'=\active \catcode`\`=\active
+ \global\let'=\rq \global\let`=\lq % default definitions
%
\global\def\code{\begingroup
\catcode\rquoteChar=\active \catcode\lquoteChar=\active
@@ -2734,8 +2751,35 @@ end
\def\quotedblbase{{\ecfont \char"12}}
\def\quotesinglbase{{\ecfont \char"0D}}
%
+% This positioning is not perfect (see the ogonek LaTeX package), but
+% we have the precomposed glyphs for the most common cases. We put the
+% tests to use those glyphs in the single \ogonek macro so we have fewer
+% dummy definitions to worry about for index entries, etc.
+%
+% ogonek is also used with other letters in Lithuanian (IOU), but using
+% the precomposed glyphs for those is not so easy since they aren't in
+% the same EC font.
+\def\ogonek#1{{%
+ \def\temp{#1}%
+ \ifx\temp\macrocharA\Aogonek
+ \else\ifx\temp\macrochara\aogonek
+ \else\ifx\temp\macrocharE\Eogonek
+ \else\ifx\temp\macrochare\eogonek
+ \else
+ \ecfont \setbox0=\hbox{#1}%
+ \ifdim\ht0=1ex\accent"0C #1%
+ \else\ooalign{\unhbox0\crcr\hidewidth\char"0C \hidewidth}%
+ \fi
+ \fi\fi\fi\fi
+ }%
+}
+\def\Aogonek{{\ecfont \char"81}}\def\macrocharA{A}
+\def\aogonek{{\ecfont \char"A1}}\def\macrochara{a}
+\def\Eogonek{{\ecfont \char"86}}\def\macrocharE{E}
+\def\eogonek{{\ecfont \char"A6}}\def\macrochare{e}
+%
\def\ecfont{%
- % We can't distinguish serif/sanserif and italic/slanted, but this
+ % We can't distinguish serif/sans and italic/slanted, but this
% is used for crude hacks anyway (like adding French and German
% quotes to documents typeset with CM, where we lose kerning), so
% hopefully nobody will notice/care.
@@ -2863,12 +2907,9 @@ end
\let\subtitlerm=\tenrm
\def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}
-\def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines
- \let\tt=\authortt}
-
\parseargdef\title{%
\checkenv\titlepage
- \leftline{\titlefonts\rm #1}
+ \leftline{\titlefonts\rmisbold #1}
% print a rule at the page bottom also.
\finishedtitlepagefalse
\vskip4pt \hrule height 4pt width \hsize \vskip4pt
@@ -2889,7 +2930,7 @@ end
\else
\checkenv\titlepage
\ifseenauthor\else \vskip 0pt plus 1filll \seenauthortrue \fi
- {\authorfont \leftline{#1}}%
+ {\secfonts\rmisbold \leftline{#1}}%
\fi
}
@@ -3859,11 +3900,11 @@ end
\def\dosynindex#1#2#3{%
% Only do \closeout if we haven't already done it, else we'll end up
% closing the target index.
- \expandafter \ifx\csname donesynindex#2\endcsname \undefined
+ \expandafter \ifx\csname donesynindex#2\endcsname \relax
% The \closeout helps reduce unnecessary open files; the limit on the
% Acorn RISC OS is a mere 16 files.
\expandafter\closeout\csname#2indfile\endcsname
- \expandafter\let\csname\donesynindex#2\endcsname = 1
+ \expandafter\let\csname donesynindex#2\endcsname = 1
\fi
% redefine \fooindfile:
\expandafter\let\expandafter\temp\expandafter=\csname#3indfile\endcsname
@@ -4021,6 +4062,7 @@ end
\definedummyword\guilsinglright
\definedummyword\expansion
\definedummyword\minus
+ \definedummyword\ogonek
\definedummyword\pounds
\definedummyword\point
\definedummyword\print
@@ -4064,6 +4106,7 @@ end
\definedummyword\v
\definedummyword\H
\definedummyword\dotaccent
+ \definedummyword\ogonek
\definedummyword\ringaccent
\definedummyword\tieaccent
\definedummyword\ubaraccent
@@ -4444,7 +4487,7 @@ end
%
% A straightforward implementation would start like this:
% \def\entry#1#2{...
-% But this frozes the catcodes in the argument, and can cause problems to
+% But this freezes the catcodes in the argument, and can cause problems to
% @code, which sets - active. This problem was fixed by a kludge---
% ``-'' was active throughout whole index, but this isn't really right.
%
@@ -5046,7 +5089,6 @@ end
% 3) Likewise, headings look best if no \parindent is used, and
% if justification is not attempted. Hence \raggedright.
-
\def\majorheading{%
{\advance\chapheadingskip by 10pt \chapbreak }%
\parsearg\chapheadingzzz
@@ -5056,7 +5098,7 @@ end
\def\chapheadingzzz#1{%
{\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
\parindent=0pt\raggedright
- \rm #1\hfill}}%
+ \rmisbold #1\hfill}}%
\bigskip \par\penalty 200\relax
\suppressfirstparagraphindent
}
@@ -5175,7 +5217,7 @@ end
\domark
%
{%
- \chapfonts \rm
+ \chapfonts \rmisbold
%
% Have to define \lastsection before calling \donoderef, because the
% xref code eventually uses it. On the other hand, it has to be called
@@ -5237,7 +5279,7 @@ end
\def\unnchfopen #1{%
\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
\parindent=0pt\raggedright
- \rm #1\hfill}}\bigskip \par\nobreak
+ \rmisbold #1\hfill}}\bigskip \par\nobreak
}
\def\chfopen #1#2{\chapoddpage {\chapfonts
\vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}%
@@ -5246,7 +5288,7 @@ end
\def\centerchfopen #1{%
\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
\parindent=0pt
- \hfill {\rm #1}\hfill}}\bigskip \par\nobreak
+ \hfill {\rmisbold #1}\hfill}}\bigskip \par\nobreak
}
\def\CHAPFopen{%
\global\let\chapmacro=\chfopen
@@ -5279,7 +5321,7 @@ end
\def\sectionheading#1#2#3#4{%
{%
% Switch to the right set of fonts.
- \csname #2fonts\endcsname \rm
+ \csname #2fonts\endcsname \rmisbold
%
\def\sectionlevel{#2}%
\def\temptype{#3}%
@@ -5955,7 +5997,7 @@ end
% we're doing normal filling. So, when using \aboveenvbreak and
% \afterenvbreak, temporarily make \parskip 0.
%
-\envdef\quotation{%
+\def\quotationstart{%
{\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip
\parindent=0pt
%
@@ -5970,6 +6012,17 @@ end
\parsearg\quotationlabel
}
+\envdef\quotation{%
+ \setnormaldispenv
+ \quotationstart
+}
+
+\envdef\smallquotation{%
+ \setsmalldispenv
+ \quotationstart
+}
+\let\Esmallquotation = \Equotation
+
% We have retained a nonzero parskip for the environment, since we're
% doing normal filling.
%
@@ -6011,12 +6064,6 @@ end
\def\uncatcodespecials{%
\def\do##1{\catcode`##1=\other}\dospecials}
%
-% [Knuth] pp. 380,381,391
-% Disable Spanish ligatures ?` and !` of \tt font
-\begingroup
- \catcode`\`=\active\gdef`{\relax\lq}
-\endgroup
-%
% Setup for the @verb command.
%
% Eight spaces for a tab
@@ -6066,7 +6113,7 @@ end
\def\codequoteleft{%
\expandafter\ifx\csname SETtxicodequotebacktick\endcsname\relax
\expandafter\ifx\csname SETcodequotebacktick\endcsname\relax
- `%
+ \relax`% the \relax disables the `! and `? ligatures
\else \char'22 \fi
\else \char'22 \fi
}
@@ -6161,6 +6208,7 @@ end
{%
\makevalueexpandable
\setupverbatim
+ \indexnofonts % Allow `@@' and other weird things in file names.
\input #1
\afterenvbreak
}%
@@ -6260,7 +6308,7 @@ end
\def\Edefun{\endgraf\medbreak}
% \makedefun{deffn} creates \deffn, \deffnx and \Edeffn;
-% the only thing remainnig is to define \deffnheader.
+% the only thing remaining is to define \deffnheader.
%
\def\makedefun#1{%
\expandafter\let\csname E#1\endcsname = \Edefun
@@ -7333,7 +7381,7 @@ end
% In case a @footnote appears in a vbox, save the footnote text and create
% the real \insert just after the vbox finished. Otherwise, the insertion
% would be lost.
-% Similarily, if a @footnote appears inside an alignment, save the footnote
+% Similarly, if a @footnote appears inside an alignment, save the footnote
% text to a box and make the \insert when a row of the table is finished.
% And the same can be done for other insert classes. --kasal, 16nov03.
@@ -7437,15 +7485,19 @@ end
% If the image is by itself, center it.
\ifvmode
\imagevmodetrue
- \nobreak\bigskip
+ \nobreak\medskip
% Usually we'll have text after the image which will insert
% \parskip glue, so insert it here too to equalize the space
% above and below.
\nobreak\vskip\parskip
\nobreak
- \line\bgroup
\fi
%
+ % Leave vertical mode so that indentation from an enclosing
+ % environment such as @quotation is respected. On the other hand, if
+ % it's at the top level, we don't want the normal paragraph indentation.
+ \noindent
+ %
% Output the image.
\ifpdf
\dopdfimage{#1}{#2}{#3}%
@@ -7456,7 +7508,7 @@ end
\epsfbox{#1.eps}%
\fi
%
- \ifimagevmode \egroup \bigbreak \fi % space after the image
+ \ifimagevmode \medskip \fi % space after the standalone image
\endgroup}
@@ -7728,10 +7780,9 @@ end
\message{localization,}
-% @documentlanguage is usually given very early, just after
-% @setfilename. If done too late, it may not override everything
-% properly. Single argument is the language (de) or locale (de_DE)
-% abbreviation. It would be nice if we could set up a hyphenation file.
+% For single-language documents, @documentlanguage is usually given very
+% early, just after @documentencoding. Single argument is the language
+% (de) or locale (de_DE) abbreviation.
%
{
\catcode`\_ = \active
@@ -7744,10 +7795,11 @@ end
\ifeof 1
\documentlanguagetrywithoutunderscore{#1_\finish}%
\else
+ \globaldefs = 1 % everything in the txi-LL files needs to persist
\input txi-#1.tex
\fi
\closein 1
- \endgroup
+ \endgroup % end raw TeX
\endgroup}
}
%
@@ -7766,9 +7818,36 @@ end
}
%
\newhelp\nolanghelp{The given language definition file cannot be found or
-is empty. Maybe you need to install it? In the current directory
-should work if nowhere else does.}
+is empty. Maybe you need to install it? Putting it in the current
+directory should work if nowhere else does.}
+
+% This macro is called from txi-??.tex files; the first argument is the
+% \language name to set (without the "\lang@" prefix), the second and
+% third args are \{left,right}hyphenmin.
+%
+% The language names to pass are determined when the format is built.
+% See the etex.log file created at that time, e.g.,
+% /usr/local/texlive/2008/texmf-var/web2c/pdftex/etex.log.
+%
+% With TeX Live 2008, etex now includes hyphenation patterns for all
+% available languages. This means we can support hyphenation in
+% Texinfo, at least to some extent. (This still doesn't solve the
+% accented characters problem.)
+%
address@hidden
+\def\txisetlanguage#1#2#3{%
+ % do not set the language if the name is undefined in the current TeX.
+ \expandafter\ifx\csname address@hidden \relax
+ \message{no patterns for #1}%
+ \else
+ \global\language = \csname address@hidden
+ \fi
+ % but there is no harm in adjusting the hyphenmin values regardless.
+ \global\lefthyphenmin = #2\relax
+ \global\righthyphenmin = #3\relax
+}
+% Helpers for encodings.
% Set the catcode of characters 128 through 255 to the specified number.
%
\def\setnonasciicharscatcode#1{%
@@ -7857,7 +7936,7 @@ should work if nowhere else does.}
\gdef^^a8{\"{}}
\gdef^^a9{\copyright}
\gdef^^aa{\ordf}
- \gdef^^ab{\missingcharmsg{LEFT-POINTING DOUBLE ANGLE QUOTATION MARK}}
+ \gdef^^ab{\guillemetleft}
\gdef^^ac{$\lnot$}
\gdef^^ad{\-}
\gdef^^ae{\registeredsymbol}
@@ -7876,7 +7955,7 @@ should work if nowhere else does.}
\gdef^^b9{$^1$}
\gdef^^ba{\ordm}
%
- \gdef^^bb{\missingcharmsg{RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK}}
+ \gdef^^bb{\guilletright}
\gdef^^bc{$1\over4$}
\gdef^^bd{$1\over2$}
\gdef^^be{$3\over4$}
@@ -7969,7 +8048,7 @@ should work if nowhere else does.}
% Latin2 (ISO-8859-2) character definitions.
\def\lattwochardefs{%
\gdef^^a0{~}
- \gdef^^a1{\missingcharmsg{LATIN CAPITAL LETTER A WITH OGONEK}}
+ \gdef^^a1{\ogonek{A}}
\gdef^^a2{\u{}}
\gdef^^a3{\L}
\gdef^^a4{\missingcharmsg{CURRENCY SIGN}}
@@ -7986,8 +8065,8 @@ should work if nowhere else does.}
\gdef^^af{\dotaccent Z}
%
\gdef^^b0{\textdegree}
- \gdef^^b1{\missingcharmsg{LATIN SMALL LETTER A WITH OGONEK}}
- \gdef^^b2{\missingcharmsg{OGONEK}}
+ \gdef^^b1{\ogonek{a}}
+ \gdef^^b2{\ogonek{ }}
\gdef^^b3{\l}
\gdef^^b4{\'{}}
\gdef^^b5{\v l}
@@ -8012,7 +8091,7 @@ should work if nowhere else does.}
\gdef^^c7{\cedilla C}
\gdef^^c8{\v C}
\gdef^^c9{\'E}
- \gdef^^ca{\missingcharmsg{LATIN CAPITAL LETTER E WITH OGONEK}}
+ \gdef^^ca{\ogonek{E}}
\gdef^^cb{\"E}
\gdef^^cc{\v E}
\gdef^^cd{\'I}
@@ -8046,7 +8125,7 @@ should work if nowhere else does.}
\gdef^^e7{\cedilla c}
\gdef^^e8{\v c}
\gdef^^e9{\'e}
- \gdef^^ea{\missingcharmsg{LATIN SMALL LETTER E WITH OGONEK}}
+ \gdef^^ea{\ogonek{e}}
\gdef^^eb{\"e}
\gdef^^ec{\v e}
\gdef^^ed{\'\i}
@@ -8275,10 +8354,14 @@ should work if nowhere else does.}
\DeclareUnicodeCharacter{0101}{\=a}
\DeclareUnicodeCharacter{0102}{\u{A}}
\DeclareUnicodeCharacter{0103}{\u{a}}
+ \DeclareUnicodeCharacter{0104}{\ogonek{A}}
+ \DeclareUnicodeCharacter{0105}{\ogonek{a}}
\DeclareUnicodeCharacter{0106}{\'C}
\DeclareUnicodeCharacter{0107}{\'c}
\DeclareUnicodeCharacter{0108}{\^C}
\DeclareUnicodeCharacter{0109}{\^c}
+ \DeclareUnicodeCharacter{0118}{\ogonek{E}}
+ \DeclareUnicodeCharacter{0119}{\ogonek{e}}
\DeclareUnicodeCharacter{010A}{\dotaccent{C}}
\DeclareUnicodeCharacter{010B}{\dotaccent{c}}
\DeclareUnicodeCharacter{010C}{\v{C}}
@@ -8426,6 +8509,8 @@ should work if nowhere else does.}
\DeclareUnicodeCharacter{0233}{\=y}
\DeclareUnicodeCharacter{0237}{\dotless{j}}
+ \DeclareUnicodeCharacter{02DB}{\ogonek{ }}
+
\DeclareUnicodeCharacter{1E02}{\dotaccent{B}}
\DeclareUnicodeCharacter{1E03}{\dotaccent{b}}
\DeclareUnicodeCharacter{1E04}{\udotaccent{B}}
@@ -8962,7 +9047,14 @@ should work if nowhere else does.}
@address@hidden = @other
@address@hidden = @other
-
address@hidden Finally, make ` and ' active, so that txicodequoteundirected and
address@hidden txicodequotebacktick work right in, e.g., @address@hidden'}}.
If we
address@hidden don't make ` and ' active, @code will not get them as active
chars.
address@hidden Do this last of all since we use ` in the previous @catcode
assignments.
address@hidden (not ready yet, sigh)
address@hidden atcode`@'address@hidden @let'@rq
address@hidden address@hidden@active @address@hidden
+
@c Local variables:
@c eval: (add-hook 'write-file-hooks 'time-stamp)
@c page-delimiter: "^\\\\message"
hooks/post-receive
--
GNU Automake
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Automake-commit] [SCM] GNU Automake branch, branch-1-10, updated. Release-1-10-1-49-gff7965d,
Ralf Wildenhues <=