[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Automake-commit] [SCM] GNU Automake branch, branch-1.11, updated. v1.11
|
From: |
Ralf Wildenhues |
|
Subject: |
[Automake-commit] [SCM] GNU Automake branch, branch-1.11, updated. v1.11-25-g54d9ecc |
|
Date: |
Sun, 06 Sep 2009 11:18:41 +0000 |
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "GNU Automake".
http://git.sv.gnu.org/gitweb/?p=automake.git;a=commitdiff;h=54d9ecc4ab64a10d551a142321016e483cdc0b79
The branch, branch-1.11 has been updated
via 54d9ecc4ab64a10d551a142321016e483cdc0b79 (commit)
via f6b3f7fb620580356865ebedfbaf76af3e534369 (commit)
via 53fe020252642f4b923b8c77392e37e4c5b7038d (commit)
via 99368830db9954b4d9fecd04d3996d9acea7129f (commit)
from c15939c0f8c262932046158397c4baadd863e0a8 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
commit 54d9ecc4ab64a10d551a142321016e483cdc0b79
Merge: c15939c0f8c262932046158397c4baadd863e0a8
f6b3f7fb620580356865ebedfbaf76af3e534369
Author: Ralf Wildenhues <address@hidden>
Date: Sun Sep 6 13:14:54 2009 +0200
Merge branch 'maint' into branch-1.11
-----------------------------------------------------------------------
Summary of changes:
ChangeLog | 26 +
Makefile.in | 1 +
THANKS | 1 +
aclocal.m4 | 4 +-
configure | 1576 +++++++++++++++++++---------------------
doc/Makefile.in | 1 +
lib/Automake/Makefile.in | 1 +
lib/Automake/tests/Makefile.in | 1 +
lib/Makefile.in | 1 +
lib/am/Makefile.in | 1 +
m4/Makefile.in | 1 +
m4/sanity.m4 | 46 +-
tests/Makefile.in | 1 +
tests/README | 35 +-
tests/defs.in | 4 +-
15 files changed, 834 insertions(+), 866 deletions(-)
diff --git a/ChangeLog b/ChangeLog
index bc1ed27..b4834be 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,29 @@
+2009-09-06 Ralf Wildenhues <address@hidden>
+
+ Avoid sleeping for one second most of the time in sanity check.
+ * m4/sanity.m4 (AM_SANITY_CHECK): Try sanity check first without
+ sleeping for a second, and only if that failed, sleep and try
+ again, to avoid the delay in the common case of a configure
+ script that is older than a second, or a system with sub-second
+ time stamp granularity.
+ Report and different patch by Jim Meyering.
+
+2009-09-06 Stefano Lattarini <address@hidden> (tiny change)
+
+ tests/README: warn about zsh incompatibilities.
+ * tests/README (User interface, Getting details from failures):
+ Explicitly state that every test is a "shell script", not just
+ a "script", and that it's run by `/bin/sh' by default.
+ * tests/README (User interface, Supported shells): New subsection,
+ telling about expected portability of the automake test scripts,
+ describing a zsh incompatibility (w.r.t. $0), and a workaround to
+ it (with the `--no-function-argzero' option).
+
+ testsuite: fix a minor glitch.
+ * tests/defs.in (exit trap): Use `$me', not `$as_me', as the
+ name of the current test (used in error messages).
+ * THANKS: Update.
+
2009-07-08 Jim Meyering <address@hidden>
manual: fix a trivial grammar error.
diff --git a/Makefile.in b/Makefile.in
index 045cc2c..32d8629 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -162,6 +162,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
diff --git a/THANKS b/THANKS
index 852f244..7b8664a 100644
--- a/THANKS
+++ b/THANKS
@@ -314,6 +314,7 @@ Shigio Yamaguchi address@hidden
Simon Josefsson address@hidden
Simon Richter address@hidden
Stefan Nordhausen address@hidden
+Stefano Lattarini address@hidden
Stepan Kasal address@hidden
Steve M. Robbins address@hidden
Steven G. Johnson address@hidden
diff --git a/aclocal.m4 b/aclocal.m4
index 4c1d07d..6d8e3f2 100644
--- a/aclocal.m4
+++ b/aclocal.m4
@@ -13,8 +13,8 @@
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.63],,
-[m4_warning([this file was generated for autoconf 2.63.
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.64],,
+[m4_warning([this file was generated for autoconf 2.64.
You have another version of autoconf. It may work, but is not guaranteed to.
If you have problems, you may need to regenerate the build system entirely.
To do so, use the procedure documented by the package, typically
`autoreconf'.])])
diff --git a/configure b/configure
index 1f7f199..8a19c43 100755
--- a/configure
+++ b/configure
@@ -1,20 +1,22 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.63 for GNU Automake 1.11.0a.
+# Generated by GNU Autoconf 2.64 for GNU Automake 1.11.0a.
#
# Report bugs to <address@hidden>.
#
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software
+# Foundation, Inc.
+#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
-## --------------------- ##
-## M4sh Initialization. ##
-## --------------------- ##
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
# Be more Bourne compatible
DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
emulate sh
NULLCMD=:
# Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
@@ -22,23 +24,15 @@ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null
2>&1; then
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
else
- case `(set -o) 2>/dev/null` in
- *posix*) set -o posix ;;
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
esac
-
fi
-
-
-# PATH needs CR
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
as_nl='
'
export as_nl
@@ -46,7 +40,13 @@ export as_nl
as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
as_echo='printf %s\n'
as_echo_n='printf %s'
else
@@ -57,7 +57,7 @@ else
as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
as_echo_n_body='eval
arg=$1;
- case $arg in
+ case $arg in #(
*"$as_nl"*)
expr "X$arg" : "X\\(.*\\)$as_nl";
arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
@@ -80,13 +80,6 @@ if test "${PATH_SEPARATOR+set}" != set; then
}
fi
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
- as_unset=unset
-else
- as_unset=false
-fi
-
# IFS
# We need space, tab and new line, in precisely that order. Quoting is
@@ -96,15 +89,15 @@ fi
IFS=" "" $as_nl"
# Find who we are. Look in the path if we contain no directory separator.
-case $0 in
+case $0 in #((
*[\\/]* ) as_myself=$0 ;;
*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
IFS=$as_save_IFS
;;
@@ -116,12 +109,16 @@ if test "x$as_myself" = x; then
fi
if test ! -f "$as_myself"; then
$as_echo "$as_myself: error: cannot find myself; rerun with an absolute file
name" >&2
- { (exit 1); exit 1; }
+ exit 1
fi
-# Work around bugs in pre-3.0 UWIN ksh.
-for as_var in ENV MAIL MAILPATH
-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
done
PS1='$ '
PS2='> '
@@ -133,330 +130,300 @@ export LC_ALL
LANGUAGE=C
export LANGUAGE
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
- }
- /^X\/\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\/\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
-
# CDPATH.
-$as_unset CDPATH
-
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
if test "x$CONFIG_SHELL" = x; then
- if (eval ":") 2>/dev/null; then
- as_have_required=yes
+ as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh)
>/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on \${1+\"address@hidden"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"address@hidden"}'='\"address@hidden"'
+ setopt NO_GLOB_SUBST
else
- as_have_required=no
+ case \`(set -o) 2>/dev/null\` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
fi
-
- if test $as_have_required = yes && (eval ":
-(as_func_return () {
- (exit \$1)
-}
-as_func_success () {
- as_func_return 0
-}
-as_func_failure () {
- as_func_return 1
-}
-as_func_ret_success () {
- return 0
-}
-as_func_ret_failure () {
- return 1
-}
+"
+ as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
exitcode=0
-if as_func_success; then
- :
-else
- exitcode=1
- echo as_func_success failed.
-fi
-
-if as_func_failure; then
- exitcode=1
- echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
- :
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+ exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1"
+ as_suggested="
as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested"
as_lineno_1a=\$LINENO
+ as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested"
as_lineno_2a=\$LINENO
+ eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+ test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" =
\"x\$as_lineno_2'\$as_run'\"' || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+ if (eval "$as_required") 2>/dev/null; then :
+ as_have_required=yes
else
- exitcode=1
- echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
- exitcode=1
- echo as_func_ret_failure succeeded.
+ as_have_required=no
fi
+ if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null;
then :
-if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
- :
else
- exitcode=1
- echo positional parameters were not saved.
-fi
-
-test \$exitcode = 0) || { (exit 1); exit 1; }
-
-(
- as_lineno_1=\$LINENO
- as_lineno_2=\$LINENO
- test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
- test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1);
exit 1; }
-") 2> /dev/null; then
- :
-else
- as_candidate_shells=
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- case $as_dir in
+ as_found=:
+ case $as_dir in #(
/*)
for as_base in sh bash ksh sh5; do
- as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
+ # Try only shells that exist, to save several forks.
+ as_shell=$as_dir/$as_base
+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a
"$as_shell"; } 2>/dev/null; then :
+ CONFIG_SHELL=$as_shell as_have_required=yes
+ if { $as_echo "$as_bourne_compatible""$as_suggested" |
as_run=a "$as_shell"; } 2>/dev/null; then :
+ break 2
+fi
+fi
done;;
esac
+ as_found=false
done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a
"$SHELL"; } 2>/dev/null; then :
+ CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
IFS=$as_save_IFS
- for as_shell in $as_candidate_shells $SHELL; do
- # Try only shells that exist, to save several forks.
- if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
- { ("$as_shell") 2> /dev/null <<\_ASEOF
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in
- *posix*) set -o posix ;;
-esac
-
-fi
-
-
-:
-_ASEOF
-}; then
- CONFIG_SHELL=$as_shell
- as_have_required=yes
- if { "$as_shell" 2> /dev/null <<\_ASEOF
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in
- *posix*) set -o posix ;;
-esac
-
-fi
-
-
-:
-(as_func_return () {
- (exit $1)
-}
-as_func_success () {
- as_func_return 0
-}
-as_func_failure () {
- as_func_return 1
-}
-as_func_ret_success () {
- return 0
-}
-as_func_ret_failure () {
- return 1
-}
-
-exitcode=0
-if as_func_success; then
- :
-else
- exitcode=1
- echo as_func_success failed.
-fi
-
-if as_func_failure; then
- exitcode=1
- echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
- :
-else
- exitcode=1
- echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
- exitcode=1
- echo as_func_ret_failure succeeded.
-fi
-
-if ( set x; as_func_ret_success y && test x = "$1" ); then
- :
-else
- exitcode=1
- echo positional parameters were not saved.
-fi
-
-test $exitcode = 0) || { (exit 1); exit 1; }
-
-(
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
-
-_ASEOF
-}; then
- break
-fi
-
-fi
-
- done
-
- if test "x$CONFIG_SHELL" != x; then
- for as_var in BASH_ENV ENV
- do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
- done
+ if test "x$CONFIG_SHELL" != x; then :
+ # We cannot yet assume a decent shell, so we have to provide a
+ # neutralization value for shells without unset; and this also
+ # works around shells that cannot unset nonexistent variables.
+ BASH_ENV=/dev/null
+ ENV=/dev/null
+ (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
export CONFIG_SHELL
exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
fi
-
- if test $as_have_required = no; then
- echo This script requires a shell more modern than all the
- echo shells that I found on your system. Please install a
- echo modern shell, or manually run the script under such a
- echo shell if you do have one.
- { (exit 1); exit 1; }
+ if test x$as_have_required = xno; then :
+ $as_echo "$0: This script requires a shell more modern than all"
+ $as_echo "$0: the shells that I found on your system."
+ if test x${ZSH_VERSION+set} = xset ; then
+ $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+ $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+ else
+ $as_echo "$0: Please tell address@hidden and
+$0: address@hidden about your system, including any
+$0: error possibly output before this message. Then install
+$0: a modern shell, or manually run the script under such a
+$0: shell if you do have one."
+ fi
+ exit 1
fi
-
-
fi
-
fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
-(eval "as_func_return () {
- (exit \$1)
-}
-as_func_success () {
- as_func_return 0
-}
-as_func_failure () {
- as_func_return 1
-}
-as_func_ret_success () {
- return 0
-}
-as_func_ret_failure () {
- return 1
-}
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
-exitcode=0
-if as_func_success; then
- :
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
else
- exitcode=1
- echo as_func_success failed.
-fi
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
-if as_func_failure; then
- exitcode=1
- echo as_func_failure succeeded.
-fi
-if as_func_ret_success; then
- :
+# as_fn_error ERROR [LINENO LOG_FD]
+# ---------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with status $?, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$?; test $as_status -eq 0 && as_status=1
+ if test "$3"; then
+ as_lineno=${as_lineno-"$2"}
as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+ fi
+ $as_echo "$as_me: error: $1" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
else
- exitcode=1
- echo as_func_ret_success failed.
+ as_expr=false
fi
-if as_func_ret_failure; then
- exitcode=1
- echo as_func_ret_failure succeeded.
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
fi
-if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
- :
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
else
- exitcode=1
- echo positional parameters were not saved.
+ as_dirname=false
fi
-test \$exitcode = 0") || {
- echo No shell found that supports shell functions.
- echo Please tell address@hidden about your system,
- echo including any error possibly output before this message.
- echo This can help us improve future autoconf versions.
- echo Configuration will now proceed without shell functions.
-}
-
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
- # uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line after each line using $LINENO; the second 'sed'
- # does the real work. The second script uses 'N' to pair each
- # line-number line with the line containing $LINENO, and appends
- # trailing '-' during substitution so that $LINENO is not a special
- # case at line end.
- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # scripts with optimization help from Paolo Bonzini. Blame Lee
- # E. McMahon (1931-1989) for sed's syntax. :-)
+ as_lineno_1=$LINENO as_lineno_1a=$LINENO
+ as_lineno_2=$LINENO as_lineno_2a=$LINENO
+ eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+ test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+ # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
sed -n '
p
/[$]LINENO/=
@@ -473,8 +440,7 @@ test \$exitcode = 0") || {
s/-\n.*//
' >$as_me.lineno &&
chmod +x "$as_me.lineno" ||
- { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX
shell" >&2
- { (exit 1); exit 1; }; }
+ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX
shell" >&2; as_fn_exit 1; }
# Don't try to exec as it changes $[0], causing all sort of problems
# (the dirname of $[0] is not the place where we might find the
@@ -484,29 +450,18 @@ test \$exitcode = 0") || {
exit
}
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
-
ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in
+case `echo -n x` in #(((((
-n*)
- case `echo 'x\c'` in
+ case `echo 'xy\c'` in
*c*) ECHO_T=' ';; # ECHO_T is single tab character.
- *) ECHO_C='\c';;
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
esac;;
*)
ECHO_N='-n';;
esac
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
rm -f conf$$ conf$$.exe conf$$.file
if test -d conf$$.dir; then
@@ -536,7 +491,7 @@ rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null
if mkdir -p . 2>/dev/null; then
- as_mkdir_p=:
+ as_mkdir_p='mkdir -p "$as_dir"'
else
test -d ./-p && rmdir ./-p
as_mkdir_p=false
@@ -555,10 +510,10 @@ else
if test -d "$1"; then
test -d "$1/.";
else
- case $1 in
+ case $1 in #(
-*)set "./$1";;
esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
???[sx]*):;;*)false;;esac;fi
'\'' sh
'
@@ -572,7 +527,6 @@ as_tr_cpp="eval sed
'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
exec 7<&0 </dev/null 6>&1
# Name of the host.
@@ -591,7 +545,6 @@ cross_compiling=no
subdirs=
MFLAGS=
MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
# Identity of this package.
PACKAGE_NAME='GNU Automake'
@@ -599,6 +552,7 @@ PACKAGE_TARNAME='automake'
PACKAGE_VERSION='1.11.0a'
PACKAGE_STRING='GNU Automake 1.11.0a'
PACKAGE_BUGREPORT='address@hidden'
+PACKAGE_URL='http://www.gnu.org/software/automake/'
ac_unique_file="automake.in"
ac_subst_vars='LTLIBOBJS
@@ -674,6 +628,7 @@ bindir
program_transform_name
prefix
exec_prefix
+PACKAGE_URL
PACKAGE_BUGREPORT
PACKAGE_STRING
PACKAGE_VERSION
@@ -796,8 +751,7 @@ do
ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
- { (exit 1); exit 1; }; }
+ as_fn_error "invalid feature name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
@@ -823,8 +777,7 @@ do
ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
- { (exit 1); exit 1; }; }
+ as_fn_error "invalid feature name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
@@ -1028,8 +981,7 @@ do
ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
- { (exit 1); exit 1; }; }
+ as_fn_error "invalid package name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
@@ -1045,8 +997,7 @@ do
ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
- { (exit 1); exit 1; }; }
+ as_fn_error "invalid package name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
@@ -1076,17 +1027,17 @@ do
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
x_libraries=$ac_optarg ;;
- -*) { $as_echo "$as_me: error: unrecognized option: $ac_option
-Try \`$0 --help' for more information." >&2
- { (exit 1); exit 1; }; }
+ -*) as_fn_error "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information."
;;
*=*)
ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
# Reject names that are not valid shell variable names.
- expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
- { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2
- { (exit 1); exit 1; }; }
+ case $ac_envvar in #(
+ '' | [0-9]* | *[!_$as_cr_alnum]* )
+ as_fn_error "invalid variable name: \`$ac_envvar'" ;;
+ esac
eval $ac_envvar=\$ac_optarg
export $ac_envvar ;;
@@ -1103,15 +1054,13 @@ done
if test -n "$ac_prev"; then
ac_option=--`echo $ac_prev | sed 's/_/-/g'`
- { $as_echo "$as_me: error: missing argument to $ac_option" >&2
- { (exit 1); exit 1; }; }
+ as_fn_error "missing argument to $ac_option"
fi
if test -n "$ac_unrecognized_opts"; then
case $enable_option_checking in
no) ;;
- fatal) { $as_echo "$as_me: error: unrecognized options:
$ac_unrecognized_opts" >&2
- { (exit 1); exit 1; }; } ;;
+ fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;;
*) $as_echo "$as_me: WARNING: unrecognized options:
$ac_unrecognized_opts" >&2 ;;
esac
fi
@@ -1134,8 +1083,7 @@ do
[\\/$]* | ?:[\\/]* ) continue;;
NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
esac
- { $as_echo "$as_me: error: expected an absolute directory name for
--$ac_var: $ac_val" >&2
- { (exit 1); exit 1; }; }
+ as_fn_error "expected an absolute directory name for --$ac_var: $ac_val"
done
# There might be people who depend on the old broken behavior: `$host'
@@ -1165,11 +1113,9 @@ test "$silent" = yes && exec 6>/dev/null
ac_pwd=`pwd` && test -n "$ac_pwd" &&
ac_ls_di=`ls -di .` &&
ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
- { $as_echo "$as_me: error: working directory cannot be determined" >&2
- { (exit 1); exit 1; }; }
+ as_fn_error "working directory cannot be determined"
test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
- { $as_echo "$as_me: error: pwd does not report name of working directory" >&2
- { (exit 1); exit 1; }; }
+ as_fn_error "pwd does not report name of working directory"
# Find the source files, if location was not specified.
@@ -1208,13 +1154,11 @@ else
fi
if test ! -r "$srcdir/$ac_unique_file"; then
test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
- { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir"
>&2
- { (exit 1); exit 1; }; }
+ as_fn_error "cannot find sources ($ac_unique_file) in $srcdir"
fi
ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
ac_abs_confdir=`(
- cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me:
error: $ac_msg" >&2
- { (exit 1); exit 1; }; }
+ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg"
pwd)`
# When building in place, set srcdir=.
if test "$ac_abs_confdir" = "$ac_pwd"; then
@@ -1314,6 +1258,8 @@ if test -n "$ac_init_help"; then
cat <<\_ACEOF
Report bugs to <address@hidden>.
+GNU Automake home page: <http://www.gnu.org/software/automake/>.
+General help using GNU software: <http://www.gnu.org/gethelp/>.
_ACEOF
ac_status=$?
fi
@@ -1377,21 +1323,24 @@ test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
GNU Automake configure 1.11.0a
-generated by GNU Autoconf 2.63
+generated by GNU Autoconf 2.64
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+Copyright (C) 2009 Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.
_ACEOF
exit
fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
cat >config.log <<_ACEOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by GNU Automake $as_me 1.11.0a, which was
-generated by GNU Autoconf 2.63. Invocation command line was
+generated by GNU Autoconf 2.64. Invocation command line was
$ $0 $@
@@ -1427,8 +1376,8 @@ for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- $as_echo "PATH: $as_dir"
-done
+ $as_echo "PATH: $as_dir"
+ done
IFS=$as_save_IFS
} >&5
@@ -1465,9 +1414,9 @@ do
ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
case $ac_pass in
- 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
+ 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
2)
- ac_configure_args1="$ac_configure_args1 '$ac_arg'"
+ as_fn_append ac_configure_args1 " '$ac_arg'"
if test $ac_must_keep_next = true; then
ac_must_keep_next=false # Got value, back to normal.
else
@@ -1483,13 +1432,13 @@ do
-* ) ac_must_keep_next=true ;;
esac
fi
- ac_configure_args="$ac_configure_args '$ac_arg'"
+ as_fn_append ac_configure_args " '$ac_arg'"
;;
esac
done
done
-$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || {
ac_configure_args0=; export ac_configure_args0; }
-$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || {
ac_configure_args1=; export ac_configure_args1; }
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
# When interrupted or exit'd, cleanup temporary files, and complete
# config.log. We remove comments because anyway the quotes in there
@@ -1514,13 +1463,13 @@ _ASBOX
case $ac_val in #(
*${as_nl}*)
case $ac_var in #(
- *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var
contains a newline" >&5
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable
$ac_var contains a newline" >&5
$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
esac
case $ac_var in #(
_ | IFS | as_nl) ;; #(
BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
- *) $as_unset $ac_var ;;
+ *) { eval $ac_var=; unset $ac_var;} ;;
esac ;;
esac
done
@@ -1592,39 +1541,41 @@ _ASBOX
exit $exit_status
' 0
for ac_signal in 1 2 13 15; do
- trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
+ trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
done
ac_signal=0
# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -f -r conftest* confdefs.h
+$as_echo "/* confdefs.h */" > confdefs.h
+
# Predefined preprocessor variables.
cat >>confdefs.h <<_ACEOF
#define PACKAGE_NAME "$PACKAGE_NAME"
_ACEOF
-
cat >>confdefs.h <<_ACEOF
#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
_ACEOF
-
cat >>confdefs.h <<_ACEOF
#define PACKAGE_VERSION "$PACKAGE_VERSION"
_ACEOF
-
cat >>confdefs.h <<_ACEOF
#define PACKAGE_STRING "$PACKAGE_STRING"
_ACEOF
-
cat >>confdefs.h <<_ACEOF
#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
_ACEOF
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
# Let the site file select an alternate cache file if it wants to.
# Prefer an explicitly selected file to automatically selected ones.
@@ -1643,7 +1594,7 @@ for ac_site_file in "$ac_site_file1" "$ac_site_file2"
do
test "x$ac_site_file" = xNONE && continue
if test -r "$ac_site_file"; then
- { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script
$ac_site_file" >&5
$as_echo "$as_me: loading site script $ac_site_file" >&6;}
sed 's/^/| /' "$ac_site_file" >&5
. "$ac_site_file"
@@ -1654,7 +1605,7 @@ if test -r "$cache_file"; then
# Some versions of bash will fail to source /dev/null (special
# files actually), so we avoid doing that.
if test -f "$cache_file"; then
- { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
$as_echo "$as_me: loading cache $cache_file" >&6;}
case $cache_file in
[\\/]* | ?:[\\/]* ) . "$cache_file";;
@@ -1662,7 +1613,7 @@ $as_echo "$as_me: loading cache $cache_file" >&6;}
esac
fi
else
- { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
$as_echo "$as_me: creating cache $cache_file" >&6;}
>$cache_file
fi
@@ -1677,11 +1628,11 @@ for ac_var in $ac_precious_vars; do
eval ac_new_val=\$ac_env_${ac_var}_value
case $ac_old_set,$ac_new_set in
set,)
- { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val'
in the previous run" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to
\`$ac_old_val' in the previous run" >&5
$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous
run" >&2;}
ac_cache_corrupted=: ;;
,set)
- { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the
previous run" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set
in the previous run" >&5
$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
ac_cache_corrupted=: ;;
,);;
@@ -1691,17 +1642,17 @@ $as_echo "$as_me: error: \`$ac_var' was not set in the
previous run" >&2;}
ac_old_val_w=`echo x $ac_old_val`
ac_new_val_w=`echo x $ac_new_val`
if test "$ac_old_val_w" != "$ac_new_val_w"; then
- { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the
previous run:" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has
changed since the previous run:" >&5
$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
ac_cache_corrupted=:
else
- { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in
\`$ac_var' since the previous run:" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace
changes in \`$ac_var' since the previous run:" >&5
$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the
previous run:" >&2;}
eval $ac_var=\$ac_old_val
fi
- { $as_echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: former value:
\`$ac_old_val'" >&5
$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
- { $as_echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: current value:
\`$ac_new_val'" >&5
$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
fi;;
esac
@@ -1713,43 +1664,20 @@ $as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
esac
case " $ac_configure_args " in
*" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
- *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+ *) as_fn_append ac_configure_args " '$ac_arg'" ;;
esac
fi
done
if $ac_cache_corrupted; then
- { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
- { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise
the build" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment
can compromise the build" >&5
$as_echo "$as_me: error: changes in the environment can compromise the build"
>&2;}
- { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm
$cache_file' and start over" >&5
-$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and
start over" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over"
"$LINENO" 5
fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
@@ -1762,24 +1690,16 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
ac_aux_dir=
for ac_dir in lib "$srcdir"/lib; do
- if test -f "$ac_dir/install-sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f "$ac_dir/install.sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- elif test -f "$ac_dir/shtool"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
+ for ac_t in install-sh install.sh shtool; do
+ if test -f "$ac_dir/$ac_t"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/$ac_t -c"
+ break 2
+ fi
+ done
done
if test -z "$ac_aux_dir"; then
- { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in
lib \"$srcdir\"/lib" >&5
-$as_echo "$as_me: error: cannot find install-sh or install.sh in lib
\"$srcdir\"/lib" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "cannot find install-sh, install.sh, or shtool in lib
\"$srcdir\"/lib" "$LINENO" 5
fi
# These three variables are undocumented and unsupported,
@@ -1794,35 +1714,27 @@ ac_configure="$SHELL $ac_aux_dir/configure" # Please
don't use this var.
# Make sure we can run config.sub.
$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
- { { $as_echo "$as_me:$LINENO: error: cannot run $SHELL
$ac_aux_dir/config.sub" >&5
-$as_echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
-{ $as_echo "$as_me:$LINENO: checking build system type" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
$as_echo_n "checking build system type... " >&6; }
-if test "${ac_cv_build+set}" = set; then
+if test "${ac_cv_build+set}" = set; then :
$as_echo_n "(cached) " >&6
else
ac_build_alias=$build_alias
test "x$ac_build_alias" = x &&
ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
test "x$ac_build_alias" = x &&
- { { $as_echo "$as_me:$LINENO: error: cannot guess build type; you must
specify one" >&5
-$as_echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "cannot guess build type; you must specify one" "$LINENO" 5
ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
- { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub
$ac_build_alias failed" >&5
-$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed"
>&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO"
5
fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_build" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
$as_echo "$ac_cv_build" >&6; }
case $ac_cv_build in
*-*-*) ;;
-*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
-$as_echo "$as_me: error: invalid value of canonical build" >&2;}
- { (exit 1); exit 1; }; };;
+*) as_fn_error "invalid value of canonical build" "$LINENO" 5;;
esac
build=$ac_cv_build
ac_save_IFS=$IFS; IFS='-'
@@ -1863,10 +1775,10 @@ am__api_version='1.11'
# OS/2's system install, which has a completely different semantic
# ./install, which can be erroneously created by make from ./install.sh.
# Reject install programs that cannot install multiple files.
-{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible
install" >&5
$as_echo_n "checking for a BSD-compatible install... " >&6; }
if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then
+if test "${ac_cv_path_install+set}" = set; then :
$as_echo_n "(cached) " >&6
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -1874,11 +1786,11 @@ for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in
- ./ | .// | /cC/* | \
+ # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+ ./ | .// | /[cC]/* | \
/etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
- ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
+ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
/usr/ucb/* ) ;;
*)
# OSF1 and SCO ODT 3.0 have their own names for install.
@@ -1915,7 +1827,7 @@ case $as_dir/ in
;;
esac
-done
+ done
IFS=$as_save_IFS
rm -rf conftest.one conftest.two conftest.dir
@@ -1931,7 +1843,7 @@ fi
INSTALL=$ac_install_sh
fi
fi
-{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
$as_echo "$INSTALL" >&6; }
# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
@@ -1942,26 +1854,19 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is
sane" >&5
$as_echo_n "checking whether build environment is sane... " >&6; }
-# Just in case
-sleep 1
-echo timestamp > conftest.file
# Reject unsafe characters in $srcdir or the absolute working directory
# name. Accept space and tab only in the latter.
am_lf='
'
case `pwd` in
*[\\\"\#\$\&\'\`$am_lf]*)
- { { $as_echo "$as_me:$LINENO: error: unsafe absolute working directory
name" >&5
-$as_echo "$as_me: error: unsafe absolute working directory name" >&2;}
- { (exit 1); exit 1; }; };;
+ as_fn_error "unsafe absolute working directory name" "$LINENO" 5;;
esac
case $srcdir in
*[\\\"\#\$\&\'\`$am_lf\ \ ]*)
- { { $as_echo "$as_me:$LINENO: error: unsafe srcdir value: \`$srcdir'" >&5
-$as_echo "$as_me: error: unsafe srcdir value: \`$srcdir'" >&2;}
- { (exit 1); exit 1; }; };;
+ as_fn_error "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
esac
# Do `set' in a subshell so we don't clobber the current shell's
@@ -1970,39 +1875,40 @@ esac
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
- set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
- if test "$*" = "X"; then
- # -L didn't work.
- set X `ls -t "$srcdir/configure" conftest.file`
- fi
- rm -f conftest.file
- if test "$*" != "X $srcdir/configure conftest.file" \
- && test "$*" != "X conftest.file $srcdir/configure"; then
-
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure
there is not a broken
-alias in your environment" >&5
-$as_echo "$as_me: error: ls -t appears to fail. Make sure there is not a
broken
-alias in your environment" >&2;}
- { (exit 1); exit 1; }; }
- fi
-
+ for am_try in 1 2; do
+ echo timestamp > conftest.file
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ if test "$*" = "X"; then
+ # -L didn't work.
+ set X `ls -t "$srcdir/configure" conftest.file`
+ fi
+ rm -f conftest.file
+ if test "$*" != "X $srcdir/configure conftest.file" \
+ && test "$*" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ as_fn_error "ls -t appears to fail. Make sure there is not a broken
+ alias in your environment" "$LINENO" 5
+ fi
+ if test "$2" = conftest.file || test $am_try -eq 2; then
+ break
+ fi
+ # Just in case.
+ sleep 1
+ done
test "$2" = conftest.file
)
then
# Ok.
:
else
- { { $as_echo "$as_me:$LINENO: error: newly created file is older than
distributed files!
-Check your system clock" >&5
-$as_echo "$as_me: error: newly created file is older than distributed files!
-Check your system clock" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
fi
-{ $as_echo "$as_me:$LINENO: result: yes" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
test "$program_prefix" != NONE &&
program_transform_name="s&^&$program_prefix&;$program_transform_name"
@@ -2030,7 +1936,7 @@ if eval "$MISSING --run true"; then
am_missing_run="$MISSING --run "
else
am_missing_run=
- { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or
missing" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too
old or missing" >&5
$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
fi
@@ -2051,9 +1957,9 @@ if test "$cross_compiling" != no; then
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}strip", so it can be a program
name with args.
set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then
+if test "${ac_cv_prog_STRIP+set}" = set; then :
$as_echo_n "(cached) " >&6
else
if test -n "$STRIP"; then
@@ -2064,24 +1970,24 @@ for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x
"$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_STRIP="${ac_tool_prefix}strip"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext"
>&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
fi
fi
STRIP=$ac_cv_prog_STRIP
if test -n "$STRIP"; then
- { $as_echo "$as_me:$LINENO: result: $STRIP" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
$as_echo "$STRIP" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -2091,9 +1997,9 @@ if test -z "$ac_cv_prog_STRIP"; then
ac_ct_STRIP=$STRIP
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_STRIP"; then
@@ -2104,24 +2010,24 @@ for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x
"$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_STRIP="strip"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext"
>&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
fi
fi
ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
if test -n "$ac_ct_STRIP"; then
- { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
$as_echo "$ac_ct_STRIP" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -2130,7 +2036,7 @@ fi
else
case $cross_compiling:$ac_tool_warned in
yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host
triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not
prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet"
>&2;}
ac_tool_warned=yes ;;
esac
@@ -2143,10 +2049,10 @@ fi
fi
INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p"
>&5
$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
if test -z "$MKDIR_P"; then
- if test "${ac_cv_path_mkdir+set}" = set; then
+ if test "${ac_cv_path_mkdir+set}" = set; then :
$as_echo_n "(cached) " >&6
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -2154,7 +2060,7 @@ for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_prog in mkdir gmkdir; do
+ for ac_prog in mkdir gmkdir; do
for ac_exec_ext in '' $ac_executable_extensions; do
{ test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x
"$as_dir/$ac_prog$ac_exec_ext"; } || continue
case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
@@ -2166,7 +2072,7 @@ do
esac
done
done
-done
+ done
IFS=$as_save_IFS
fi
@@ -2182,7 +2088,7 @@ fi
MKDIR_P="$ac_install_sh -d"
fi
fi
-{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
$as_echo "$MKDIR_P" >&6; }
mkdir_p="$MKDIR_P"
@@ -2195,9 +2101,9 @@ for ac_prog in gawk mawk nawk awk
do
# Extract the first word of "$ac_prog", so it can be a program name with
args.
set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_AWK+set}" = set; then
+if test "${ac_cv_prog_AWK+set}" = set; then :
$as_echo_n "(cached) " >&6
else
if test -n "$AWK"; then
@@ -2208,24 +2114,24 @@ for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x
"$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_AWK="$ac_prog"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext"
>&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
fi
fi
AWK=$ac_cv_prog_AWK
if test -n "$AWK"; then
- { $as_echo "$as_me:$LINENO: result: $AWK" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
$as_echo "$AWK" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -2233,11 +2139,11 @@ fi
test -n "$AWK" && break
done
-{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets
\$(MAKE)" >&5
$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
set x ${MAKE-make}
ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" =
set"; }; then
+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" =
set"; }; then :
$as_echo_n "(cached) " >&6
else
cat >conftest.make <<\_ACEOF
@@ -2255,11 +2161,11 @@ esac
rm -f conftest.make
fi
if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
- { $as_echo "$as_me:$LINENO: result: yes" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
SET_MAKE=
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
SET_MAKE="MAKE=${MAKE-make}"
fi
@@ -2279,9 +2185,7 @@ if test "`cd $srcdir && pwd`" != "`pwd`"; then
am__isrc=' -I$(srcdir)'
# test to see if srcdir already configured
if test -f $srcdir/config.status; then
- { { $as_echo "$as_me:$LINENO: error: source directory already configured;
run \"make distclean\" there first" >&5
-$as_echo "$as_me: error: source directory already configured; run \"make
distclean\" there first" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "source directory already configured; run \"make distclean\"
there first" "$LINENO" 5
fi
fi
@@ -2359,9 +2263,9 @@ AUTOMAKE="perllibdir=\"`pwd`/lib$PATH_SEPARATOR./lib\"
\"`pwd`/automake\" --libd
# Extract the first word of "perl", so it can be a program name with args.
set dummy perl; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_PERL+set}" = set; then
+if test "${ac_cv_path_PERL+set}" = set; then :
$as_echo_n "(cached) " >&6
else
case $PERL in
@@ -2374,14 +2278,14 @@ for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x
"$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_path_PERL="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext"
>&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
;;
@@ -2389,35 +2293,28 @@ esac
fi
PERL=$ac_cv_path_PERL
if test -n "$PERL"; then
- { $as_echo "$as_me:$LINENO: result: $PERL" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PERL" >&5
$as_echo "$PERL" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
if test -z "$PERL"; then
- { { $as_echo "$as_me:$LINENO: error: perl not found" >&5
-$as_echo "$as_me: error: perl not found" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "perl not found" "$LINENO" 5
fi
$PERL -e 'require 5.006;' || {
- { { $as_echo "$as_me:$LINENO: error: perl 5.6 or better is required; perl
5.8.2 or better
+ as_fn_error "perl 5.6 or better is required; perl 5.8.2 or better
is recommended. If you have several perl versions
installed, select the one Automake should use using
- ./configure PERL=/path/to/perl" >&5
-$as_echo "$as_me: error: perl 5.6 or better is required; perl 5.8.2 or better
-is recommended. If you have several perl versions
-installed, select the one Automake should use using
- ./configure PERL=/path/to/perl" >&2;}
- { (exit 1); exit 1; }; }
+ ./configure PERL=/path/to/perl" "$LINENO" 5
}
# We require ithreads support, and version 5.7.2 for CLONE.
-{ $as_echo "$as_me:$LINENO: checking whether $PERL supports ithreads" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $PERL supports
ithreads" >&5
$as_echo_n "checking whether $PERL supports ithreads... " >&6; }
-if test "${am_cv_prog_PERL_ithreads+set}" = set; then
+if test "${am_cv_prog_PERL_ithreads+set}" = set; then :
$as_echo_n "(cached) " >&6
else
if $PERL -e '
@@ -2438,7 +2335,7 @@ else
am_cv_prog_PERL_ithreads=no
fi
fi
-{ $as_echo "$as_me:$LINENO: result: $am_cv_prog_PERL_ithreads" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_PERL_ithreads" >&5
$as_echo "$am_cv_prog_PERL_ithreads" >&6; }
if test $am_cv_prog_PERL_ithreads = yes; then
PERL_THREADS=1;
@@ -2450,9 +2347,9 @@ fi
# The test suite will skip some tests if tex is absent.
# Extract the first word of "tex", so it can be a program name with args.
set dummy tex; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_TEX+set}" = set; then
+if test "${ac_cv_prog_TEX+set}" = set; then :
$as_echo_n "(cached) " >&6
else
if test -n "$TEX"; then
@@ -2463,24 +2360,24 @@ for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x
"$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_TEX="tex"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext"
>&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
fi
fi
TEX=$ac_cv_prog_TEX
if test -n "$TEX"; then
- { $as_echo "$as_me:$LINENO: result: $TEX" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TEX" >&5
$as_echo "$TEX" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -2497,9 +2394,9 @@ HELP2MAN=${HELP2MAN-"${am_missing_run}help2man"}
# following tests, but some users were unable to figure out that their
# installation was broken since --version appeared to work.
-{ $as_echo "$as_me:$LINENO: checking whether autoconf is installed" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether autoconf is
installed" >&5
$as_echo_n "checking whether autoconf is installed... " >&6; }
-if test "${am_cv_autoconf_installed+set}" = set; then
+if test "${am_cv_autoconf_installed+set}" = set; then :
$as_echo_n "(cached) " >&6
else
if { echo "$as_me:$LINENO: eval $am_AUTOCONF --version" >&5
@@ -2513,19 +2410,16 @@ else
am_cv_autoconf_installed=no
fi
fi
-{ $as_echo "$as_me:$LINENO: result: $am_cv_autoconf_installed" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_autoconf_installed" >&5
$as_echo "$am_cv_autoconf_installed" >&6; }
if test "$am_cv_autoconf_installed" = no; then
- { { $as_echo "$as_me:$LINENO: error: Autoconf 2.60 or better is required.
- Please make sure it is installed and in your PATH." >&5
-$as_echo "$as_me: error: Autoconf 2.60 or better is required.
- Please make sure it is installed and in your PATH." >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "Autoconf 2.60 or better is required.
+ Please make sure it is installed and in your PATH." "$LINENO" 5
fi
-{ $as_echo "$as_me:$LINENO: checking whether autoconf works" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether autoconf works" >&5
$as_echo_n "checking whether autoconf works... " >&6; }
-if test "${am_cv_autoconf_works+set}" = set; then
+if test "${am_cv_autoconf_works+set}" = set; then :
$as_echo_n "(cached) " >&6
else
mkdir conftest
@@ -2542,19 +2436,16 @@ else
fi
rm -rf conftest
fi
-{ $as_echo "$as_me:$LINENO: result: $am_cv_autoconf_works" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_autoconf_works" >&5
$as_echo "$am_cv_autoconf_works" >&6; }
if test "$am_cv_autoconf_works" = no; then
- { { $as_echo "$as_me:$LINENO: error: The installed version of autoconf does
not work.
- Please check config.log for error messages before this one." >&5
-$as_echo "$as_me: error: The installed version of autoconf does not work.
- Please check config.log for error messages before this one." >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "The installed version of autoconf does not work.
+ Please check config.log for error messages before this one." "$LINENO" 5
fi
-{ $as_echo "$as_me:$LINENO: checking whether autoconf is recent enough" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether autoconf is recent
enough" >&5
$as_echo_n "checking whether autoconf is recent enough... " >&6; }
-if test "${am_cv_autoconf_version+set}" = set; then
+if test "${am_cv_autoconf_version+set}" = set; then :
$as_echo_n "(cached) " >&6
else
mkdir conftest
@@ -2571,18 +2462,16 @@ else
fi
rm -rf conftest
fi
-{ $as_echo "$as_me:$LINENO: result: $am_cv_autoconf_version" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_autoconf_version" >&5
$as_echo "$am_cv_autoconf_version" >&6; }
if test "$am_cv_autoconf_version" = no; then
- { { $as_echo "$as_me:$LINENO: error: Autoconf 2.61a-341 or better is
required." >&5
-$as_echo "$as_me: error: Autoconf 2.61a-341 or better is required." >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "Autoconf 2.61a-341 or better is required." "$LINENO" 5
fi
# Test for ln. We need use it to install the versioned binaries.
-{ $as_echo "$as_me:$LINENO: checking whether ln works" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln works" >&5
$as_echo_n "checking whether ln works... " >&6; }
-if test "${am_cv_prog_ln+set}" = set; then
+if test "${am_cv_prog_ln+set}" = set; then :
$as_echo_n "(cached) " >&6
else
@@ -2600,7 +2489,7 @@ LN=$am_cv_prog_ln
result=no
test "x$am_cv_prog_ln" = xln && result=yes
-{ $as_echo "$as_me:$LINENO: result: $result" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $result" >&5
$as_echo "$result" >&6; }
# The amount we should wait after modifying files depends on the platform.
@@ -2615,9 +2504,9 @@ esac
# Test for things needed by the test suite.
-{ $as_echo "$as_me:$LINENO: checking for grep that handles long lines and -e"
>&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long
lines and -e" >&5
$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
-if test "${ac_cv_path_GREP+set}" = set; then
+if test "${ac_cv_path_GREP+set}" = set; then :
$as_echo_n "(cached) " >&6
else
if test -z "$GREP"; then
@@ -2628,7 +2517,7 @@ for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_prog in grep ggrep; do
+ for ac_prog in grep ggrep; do
for ac_exec_ext in '' $ac_executable_extensions; do
ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
{ test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
@@ -2648,7 +2537,7 @@ case `"$ac_path_GREP" --version 2>&1` in
$as_echo 'GREP' >> "conftest.nl"
"$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl"
>"conftest.out" 2>/dev/null || break
diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- ac_count=`expr $ac_count + 1`
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
if test $ac_count -gt ${ac_path_GREP_max-0}; then
# Best one so far, save it but keep looking for a better one
ac_cv_path_GREP="$ac_path_GREP"
@@ -2663,26 +2552,24 @@ esac
$ac_path_GREP_found && break 3
done
done
-done
+ done
IFS=$as_save_IFS
if test -z "$ac_cv_path_GREP"; then
- { { $as_echo "$as_me:$LINENO: error: no acceptable grep could be found in
$PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-$as_echo "$as_me: error: no acceptable grep could be found in
$PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "no acceptable grep could be found in
$PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
fi
else
ac_cv_path_GREP=$GREP
fi
fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
$as_echo "$ac_cv_path_GREP" >&6; }
GREP="$ac_cv_path_GREP"
-{ $as_echo "$as_me:$LINENO: checking for egrep" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
$as_echo_n "checking for egrep... " >&6; }
-if test "${ac_cv_path_EGREP+set}" = set; then
+if test "${ac_cv_path_EGREP+set}" = set; then :
$as_echo_n "(cached) " >&6
else
if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
@@ -2696,7 +2583,7 @@ for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_prog in egrep; do
+ for ac_prog in egrep; do
for ac_exec_ext in '' $ac_executable_extensions; do
ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
{ test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
@@ -2716,7 +2603,7 @@ case `"$ac_path_EGREP" --version 2>&1` in
$as_echo 'EGREP' >> "conftest.nl"
"$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null ||
break
diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- ac_count=`expr $ac_count + 1`
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
if test $ac_count -gt ${ac_path_EGREP_max-0}; then
# Best one so far, save it but keep looking for a better one
ac_cv_path_EGREP="$ac_path_EGREP"
@@ -2731,12 +2618,10 @@ esac
$ac_path_EGREP_found && break 3
done
done
-done
+ done
IFS=$as_save_IFS
if test -z "$ac_cv_path_EGREP"; then
- { { $as_echo "$as_me:$LINENO: error: no acceptable egrep could be found in
$PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-$as_echo "$as_me: error: no acceptable egrep could be found in
$PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "no acceptable egrep could be found in
$PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
fi
else
ac_cv_path_EGREP=$EGREP
@@ -2744,14 +2629,14 @@ fi
fi
fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
$as_echo "$ac_cv_path_EGREP" >&6; }
EGREP="$ac_cv_path_EGREP"
-{ $as_echo "$as_me:$LINENO: checking for fgrep" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
$as_echo_n "checking for fgrep... " >&6; }
-if test "${ac_cv_path_FGREP+set}" = set; then
+if test "${ac_cv_path_FGREP+set}" = set; then :
$as_echo_n "(cached) " >&6
else
if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
@@ -2765,7 +2650,7 @@ for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_prog in fgrep; do
+ for ac_prog in fgrep; do
for ac_exec_ext in '' $ac_executable_extensions; do
ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
{ test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
@@ -2785,7 +2670,7 @@ case `"$ac_path_FGREP" --version 2>&1` in
$as_echo 'FGREP' >> "conftest.nl"
"$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- ac_count=`expr $ac_count + 1`
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
if test $ac_count -gt ${ac_path_FGREP_max-0}; then
# Best one so far, save it but keep looking for a better one
ac_cv_path_FGREP="$ac_path_FGREP"
@@ -2800,12 +2685,10 @@ esac
$ac_path_FGREP_found && break 3
done
done
-done
+ done
IFS=$as_save_IFS
if test -z "$ac_cv_path_FGREP"; then
- { { $as_echo "$as_me:$LINENO: error: no acceptable fgrep could be found in
$PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-$as_echo "$as_me: error: no acceptable fgrep could be found in
$PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "no acceptable fgrep could be found in
$PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
fi
else
ac_cv_path_FGREP=$FGREP
@@ -2813,15 +2696,15 @@ fi
fi
fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_FGREP" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
$as_echo "$ac_cv_path_FGREP" >&6; }
FGREP="$ac_cv_path_FGREP"
-{ $as_echo "$as_me:$LINENO: checking whether /bin/sh has working 'set -e' with
exit trap" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether /bin/sh has working
'set -e' with exit trap" >&5
$as_echo_n "checking whether /bin/sh has working 'set -e' with exit trap... "
>&6; }
-if test "${am_cv_sh_errexit_works+set}" = set; then
+if test "${am_cv_sh_errexit_works+set}" = set; then :
$as_echo_n "(cached) " >&6
else
if /bin/sh -ec "trap 'exit \$?' 0; (exit 77); exit 77"; test $? = 77
@@ -2832,14 +2715,14 @@ else
fi
fi
-{ $as_echo "$as_me:$LINENO: result: $am_cv_sh_errexit_works" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_sh_errexit_works" >&5
$as_echo "$am_cv_sh_errexit_works" >&6; }
if test $am_cv_sh_errexit_works = no; then
- { $as_echo "$as_me:$LINENO: WARNING: \`${MAKE-make} check' will leave
leftover directories tests/*.dir" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`${MAKE-make} check' will
leave leftover directories tests/*.dir" >&5
$as_echo "$as_me: WARNING: \`${MAKE-make} check' will leave leftover
directories tests/*.dir" >&2;}
- { $as_echo "$as_me:$LINENO: WARNING: you can clean them up manually using
\`${MAKE-make} clean' or" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: you can clean them up
manually using \`${MAKE-make} clean' or" >&5
$as_echo "$as_me: WARNING: you can clean them up manually using \`${MAKE-make}
clean' or" >&2;}
- { $as_echo "$as_me:$LINENO: WARNING: \`cd tests && ${MAKE-make}
clean-local-check'" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`cd tests && ${MAKE-make}
clean-local-check'" >&5
$as_echo "$as_me: WARNING: \`cd tests && ${MAKE-make} clean-local-check'" >&2;}
fi
sh_errexit_works=$am_cv_sh_errexit_works
@@ -2879,13 +2762,13 @@ _ACEOF
case $ac_val in #(
*${as_nl}*)
case $ac_var in #(
- *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var
contains a newline" >&5
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable
$ac_var contains a newline" >&5
$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
esac
case $ac_var in #(
_ | IFS | as_nl) ;; #(
BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
- *) $as_unset $ac_var ;;
+ *) { eval $ac_var=; unset $ac_var;} ;;
esac ;;
esac
done
@@ -2893,8 +2776,8 @@ $as_echo "$as_me: WARNING: cache variable $ac_var
contains a newline" >&2;} ;;
(set) 2>&1 |
case $as_nl`(ac_space=' '; set) 2>&1` in #(
*${as_nl}ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote
- # substitution turns \\\\ into \\, and sed turns \\ into \).
+ # `set' does not quote correctly, so add quotes: double-quote
+ # substitution turns \\\\ into \\, and sed turns \\ into \.
sed -n \
"s/'/'\\\\''/g;
s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
@@ -2917,11 +2800,11 @@ $as_echo "$as_me: WARNING: cache variable $ac_var
contains a newline" >&2;} ;;
if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
if test -w "$cache_file"; then
test "x$cache_file" != "x/dev/null" &&
- { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
$as_echo "$as_me: updating cache $cache_file" >&6;}
cat confcache >$cache_file
else
- { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache
$cache_file" >&5
$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
fi
fi
@@ -2977,8 +2860,8 @@ for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
# 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
# will be set to the directory where LIBOBJS objects are built.
- ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
- ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
+ as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+ as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
done
LIBOBJS=$ac_libobjs
@@ -2991,9 +2874,10 @@ LTLIBOBJS=$ac_ltlibobjs
ac_write_fail=0
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
-cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
#! $SHELL
# Generated by $as_me.
# Run this file to recreate the current configuration.
@@ -3003,17 +2887,18 @@ cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
debug=false
ac_cs_recheck=false
ac_cs_silent=false
-SHELL=\${CONFIG_SHELL-$SHELL}
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-## --------------------- ##
-## M4sh Initialization. ##
-## --------------------- ##
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
# Be more Bourne compatible
DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
emulate sh
NULLCMD=:
# Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
@@ -3021,23 +2906,15 @@ if test -n "${ZSH_VERSION+set}" && (emulate sh)
>/dev/null 2>&1; then
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
else
- case `(set -o) 2>/dev/null` in
- *posix*) set -o posix ;;
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
esac
-
fi
-
-
-# PATH needs CR
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
as_nl='
'
export as_nl
@@ -3045,7 +2922,13 @@ export as_nl
as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
as_echo='printf %s\n'
as_echo_n='printf %s'
else
@@ -3056,7 +2939,7 @@ else
as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
as_echo_n_body='eval
arg=$1;
- case $arg in
+ case $arg in #(
*"$as_nl"*)
expr "X$arg" : "X\\(.*\\)$as_nl";
arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
@@ -3079,13 +2962,6 @@ if test "${PATH_SEPARATOR+set}" != set; then
}
fi
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
- as_unset=unset
-else
- as_unset=false
-fi
-
# IFS
# We need space, tab and new line, in precisely that order. Quoting is
@@ -3095,15 +2971,15 @@ fi
IFS=" "" $as_nl"
# Find who we are. Look in the path if we contain no directory separator.
-case $0 in
+case $0 in #((
*[\\/]* ) as_myself=$0 ;;
*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
IFS=$as_save_IFS
;;
@@ -3115,12 +2991,16 @@ if test "x$as_myself" = x; then
fi
if test ! -f "$as_myself"; then
$as_echo "$as_myself: error: cannot find myself; rerun with an absolute file
name" >&2
- { (exit 1); exit 1; }
+ exit 1
fi
-# Work around bugs in pre-3.0 UWIN ksh.
-for as_var in ENV MAIL MAILPATH
-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
done
PS1='$ '
PS2='> '
@@ -3132,7 +3012,89 @@ export LC_ALL
LANGUAGE=C
export LANGUAGE
-# Required to use basename.
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error ERROR [LINENO LOG_FD]
+# ---------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with status $?, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$?; test $as_status -eq 0 && as_status=1
+ if test "$3"; then
+ as_lineno=${as_lineno-"$2"}
as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+ fi
+ $as_echo "$as_me: error: $1" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
if expr a : '\(a\)' >/dev/null 2>&1 &&
test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
@@ -3146,8 +3108,12 @@ else
as_basename=false
fi
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
-# Name of the executable.
as_me=`$as_basename -- "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
X"$0" : 'X\(//\)$' \| \
@@ -3167,76 +3133,25 @@ $as_echo X/"$0" |
}
s/.*/./; q'`
-# CDPATH.
-$as_unset CDPATH
-
-
-
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-
- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
- # uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line after each line using $LINENO; the second 'sed'
- # does the real work. The second script uses 'N' to pair each
- # line-number line with the line containing $LINENO, and appends
- # trailing '-' during substitution so that $LINENO is not a special
- # case at line end.
- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # scripts with optimization help from Paolo Bonzini. Blame Lee
- # E. McMahon (1931-1989) for sed's syntax. :-)
- sed -n '
- p
- /[$]LINENO/=
- ' <$as_myself |
- sed '
- s/[$]LINENO.*/&-/
- t lineno
- b
- :lineno
- N
- :loop
- s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
- t loop
- s/-\n.*//
- ' >$as_me.lineno &&
- chmod +x "$as_me.lineno" ||
- { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX
shell" >&2
- { (exit 1); exit 1; }; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensitive to this).
- . "./$as_me.lineno"
- # Exit status is that of the last command.
- exit
-}
-
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in
+case `echo -n x` in #(((((
-n*)
- case `echo 'x\c'` in
+ case `echo 'xy\c'` in
*c*) ECHO_T=' ';; # ECHO_T is single tab character.
- *) ECHO_C='\c';;
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
esac;;
*)
ECHO_N='-n';;
esac
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
rm -f conf$$ conf$$.exe conf$$.file
if test -d conf$$.dir; then
@@ -3265,8 +3180,56 @@ fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
if mkdir -p . 2>/dev/null; then
- as_mkdir_p=:
+ as_mkdir_p='mkdir -p "$as_dir"'
else
test -d ./-p && rmdir ./-p
as_mkdir_p=false
@@ -3285,10 +3248,10 @@ else
if test -d "$1"; then
test -d "$1/.";
else
- case $1 in
+ case $1 in #(
-*)set "./$1";;
esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
???[sx]*):;;*)false;;esac;fi
'\'' sh
'
@@ -3303,13 +3266,19 @@ as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
-# Save the log message, to keep $[0] and so on meaningful, and to
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
This file was extended by GNU Automake $as_me 1.11.0a, which was
-generated by GNU Autoconf 2.63. Invocation command line was
+generated by GNU Autoconf 2.64. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
CONFIG_HEADERS = $CONFIG_HEADERS
@@ -3336,10 +3305,11 @@ _ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
ac_cs_usage="\
-\`$as_me' instantiates files from templates according to the
-current configuration.
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration. Unless the files
+and actions are specified as TAGs, all are instantiated by default.
-Usage: $0 [OPTION]... [FILE]...
+Usage: $0 [OPTION]... [TAG]...
-h, --help print this help, then exit
-V, --version print version number and configuration settings, then exit
@@ -3353,16 +3323,18 @@ Usage: $0 [OPTION]... [FILE]...
Configuration files:
$config_files
-Report bugs to <address@hidden>."
+Report bugs to <address@hidden>.
+GNU Automake home page: <http://www.gnu.org/software/automake/>.
+General help using GNU software: <http://www.gnu.org/gethelp/>."
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_version="\\
GNU Automake config.status 1.11.0a
-configured by $0, generated by GNU Autoconf 2.63,
+configured by $0, generated by GNU Autoconf 2.64,
with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //;
s/[\\""\`\$]/\\\\&/g'`\\"
-Copyright (C) 2008 Free Software Foundation, Inc.
+Copyright (C) 2009 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."
@@ -3405,7 +3377,7 @@ do
case $ac_optarg in
*\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
- CONFIG_FILES="$CONFIG_FILES '$ac_optarg'"
+ as_fn_append CONFIG_FILES " '$ac_optarg'"
ac_need_defaults=false;;
--he | --h | --help | --hel | -h )
$as_echo "$ac_cs_usage"; exit ;;
@@ -3414,11 +3386,10 @@ do
ac_cs_silent=: ;;
# This is an error.
- -*) { $as_echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2
- { (exit 1); exit 1; }; } ;;
+ -*) as_fn_error "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
- *) ac_config_targets="$ac_config_targets $1"
+ *) as_fn_append ac_config_targets " $1"
ac_need_defaults=false ;;
esac
@@ -3481,9 +3452,7 @@ do
"tests/aclocal-${APIVERSION}") CONFIG_FILES="$CONFIG_FILES
tests/aclocal-${APIVERSION}:tests/aclocal.in" ;;
"tests/automake-${APIVERSION}") CONFIG_FILES="$CONFIG_FILES
tests/automake-${APIVERSION}:tests/automake.in" ;;
- *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target"
>&5
-$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
- { (exit 1); exit 1; }; };;
+ *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
esac
done
@@ -3508,7 +3477,7 @@ $debug ||
trap 'exit_status=$?
{ test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
' 0
- trap '{ (exit 1); exit 1; }' 1 2 13 15
+ trap 'as_fn_exit 1' 1 2 13 15
}
# Create a (secure) tmp directory for tmp files.
@@ -3519,11 +3488,7 @@ $debug ||
{
tmp=./conf$$-$RANDOM
(umask 077 && mkdir "$tmp")
-} ||
-{
- $as_echo "$as_me: cannot create a temporary directory in ." >&2
- { (exit 1); exit 1; }
-}
+} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5
# Set up the scripts for CONFIG_FILES section.
# No need to generate them if there are no CONFIG_FILES.
@@ -3531,10 +3496,16 @@ $debug ||
if test -n "$CONFIG_FILES"; then
-ac_cr='
'
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+ eval ac_cr=\$\'\\r\'
+fi
ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
- ac_cs_awk_cr='\\r'
+ ac_cs_awk_cr='\r'
else
ac_cs_awk_cr=$ac_cr
fi
@@ -3548,24 +3519,18 @@ _ACEOF
echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
echo "_ACEOF"
} >conf$$subs.sh ||
- { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
ac_delim='%!_!# '
for ac_last_try in false false false false false :; do
. ./conf$$subs.sh ||
- { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
if test $ac_delim_n = $ac_delim_num; then
break
elif $ac_last_try; then
- { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
else
ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
fi
@@ -3654,9 +3619,7 @@ if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
else
cat
fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
- || { { $as_echo "$as_me:$LINENO: error: could not setup config files
machinery" >&5
-$as_echo "$as_me: error: could not setup config files machinery" >&2;}
- { (exit 1); exit 1; }; }
+ || as_fn_error "could not setup config files machinery" "$LINENO" 5
_ACEOF
# VPATH may cause trouble with some makes, so we remove $(srcdir),
@@ -3687,9 +3650,7 @@ do
esac
case $ac_mode$ac_tag in
:[FHL]*:*);;
- :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5
-$as_echo "$as_me: error: invalid tag $ac_tag" >&2;}
- { (exit 1); exit 1; }; };;
+ :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;;
:[FH]-) ac_tag=-:-;;
:[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
esac
@@ -3717,12 +3678,10 @@ $as_echo "$as_me: error: invalid tag $ac_tag" >&2;}
[\\/$]*) false;;
*) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
esac ||
- { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f"
>&5
-$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;}
- { (exit 1); exit 1; }; };;
+ as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;;
esac
case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;;
esac
- ac_file_inputs="$ac_file_inputs '$ac_f'"
+ as_fn_append ac_file_inputs " '$ac_f'"
done
# Let's still pretend it is `configure' which instantiates (i.e., don't
@@ -3733,7 +3692,7 @@ $as_echo "$as_me: error: cannot find input file: $ac_f"
>&2;}
`' by configure.'
if test x"$ac_file" != x-; then
configure_input="$ac_file. $configure_input"
- { $as_echo "$as_me:$LINENO: creating $ac_file" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
$as_echo "$as_me: creating $ac_file" >&6;}
fi
# Neutralize special characters interpreted by sed in replacement strings.
@@ -3746,9 +3705,7 @@ $as_echo "$as_me: creating $ac_file" >&6;}
case $ac_tag in
*:-:* | *:-) cat >"$tmp/stdin" \
- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
-$as_echo "$as_me: error: could not create $ac_file" >&2;}
- { (exit 1); exit 1; }; } ;;
+ || as_fn_error "could not create $ac_file" "$LINENO" 5 ;;
esac
;;
esac
@@ -3776,47 +3733,7 @@ $as_echo X"$ac_file" |
q
}
s/.*/./; q'`
- { as_dir="$ac_dir"
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
- as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create
directory $as_dir" >&5
-$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
- { (exit 1); exit 1; }; }; }
+ as_dir="$ac_dir"; as_fn_mkdir_p
ac_builddir=.
case "$ac_dir" in
@@ -3873,7 +3790,6 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
# If the template does not know about datarootdir, expand it.
# FIXME: This hack should be removed a few years after 2.60.
ac_datarootdir_hack=; ac_datarootdir_seen=
-
ac_sed_dataroot='
/datarootdir/ {
p
@@ -3883,12 +3799,11 @@ ac_sed_dataroot='
/@docdir@/p
/@infodir@/p
/@localedir@/p
-/@mandir@/p
-'
+/@mandir@/p'
case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
*datarootdir*) ac_datarootdir_seen=yes;;
address@hidden@*|address@hidden@*|address@hidden@*|address@hidden@*|address@hidden@*)
- { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the
--datarootdir setting" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to
ignore the --datarootdir setting" >&5
$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir
setting" >&2;}
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
@@ -3898,7 +3813,7 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
s&@infodir@&$infodir&g
s&@localedir@&$localedir&g
s&@mandir@&$mandir&g
- s&\\\${datarootdir}&$datarootdir&g' ;;
+ s&\\\${datarootdir}&$datarootdir&g' ;;
esac
_ACEOF
@@ -3927,14 +3842,12 @@ s&@MKDIR_P@&$ac_MKDIR_P&;t t
$ac_datarootdir_hack
"
eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk"
>$tmp/out \
- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
-$as_echo "$as_me: error: could not create $ac_file" >&2;}
- { (exit 1); exit 1; }; }
+ || as_fn_error "could not create $ac_file" "$LINENO" 5
test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
{ ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
{ ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z
"$ac_out"; } &&
- { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the
variable \`datarootdir'
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a
reference to the variable \`datarootdir'
which seems to be undefined. Please make sure it is defined." >&5
$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable
\`datarootdir'
which seems to be undefined. Please make sure it is defined." >&2;}
@@ -3944,9 +3857,7 @@ which seems to be undefined. Please make sure it is
defined." >&2;}
-) cat "$tmp/out" && rm -f "$tmp/out";;
*) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
esac \
- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
-$as_echo "$as_me: error: could not create $ac_file" >&2;}
- { (exit 1); exit 1; }; }
+ || as_fn_error "could not create $ac_file" "$LINENO" 5
;;
@@ -3962,15 +3873,12 @@ $as_echo "$as_me: error: could not create $ac_file"
>&2;}
done # for ac_tag
-{ (exit 0); exit 0; }
+as_fn_exit 0
_ACEOF
-chmod +x $CONFIG_STATUS
ac_clean_files=$ac_clean_files_save
test $ac_write_fail = 0 ||
- { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS"
>&5
-$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5
# configure is writing to config.log, and then calls config.status.
@@ -3991,10 +3899,10 @@ if test "$no_create" != yes; then
exec 5>>config.log
# Use ||, not &&, to avoid exiting from the if with $? = 1, which
# would make configure fail if this is the last instruction.
- $ac_cs_success || { (exit 1); exit 1; }
+ $ac_cs_success || as_fn_exit $?
fi
if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no;
then
- { $as_echo "$as_me:$LINENO: WARNING: unrecognized options:
$ac_unrecognized_opts" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options:
$ac_unrecognized_opts" >&5
$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
fi
diff --git a/doc/Makefile.in b/doc/Makefile.in
index fdda4df..8883af3 100644
--- a/doc/Makefile.in
+++ b/doc/Makefile.in
@@ -130,6 +130,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
diff --git a/lib/Automake/Makefile.in b/lib/Automake/Makefile.in
index 28d66d1..369719e 100644
--- a/lib/Automake/Makefile.in
+++ b/lib/Automake/Makefile.in
@@ -149,6 +149,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
diff --git a/lib/Automake/tests/Makefile.in b/lib/Automake/tests/Makefile.in
index 994783f..67105e4 100644
--- a/lib/Automake/tests/Makefile.in
+++ b/lib/Automake/tests/Makefile.in
@@ -165,6 +165,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
diff --git a/lib/Makefile.in b/lib/Makefile.in
index bb90842..5d853bc 100644
--- a/lib/Makefile.in
+++ b/lib/Makefile.in
@@ -152,6 +152,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
diff --git a/lib/am/Makefile.in b/lib/am/Makefile.in
index 29d842d..bd50699 100644
--- a/lib/am/Makefile.in
+++ b/lib/am/Makefile.in
@@ -109,6 +109,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
diff --git a/m4/Makefile.in b/m4/Makefile.in
index 291f1e1..eeaeff2 100644
--- a/m4/Makefile.in
+++ b/m4/Makefile.in
@@ -109,6 +109,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
diff --git a/m4/sanity.m4 b/m4/sanity.m4
index 3d2f304..db87c8b 100644
--- a/m4/sanity.m4
+++ b/m4/sanity.m4
@@ -1,21 +1,18 @@
# Check to make sure that the build environment is sane. -*- Autoconf -*-
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008, 2009
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 5
+# serial 6
# AM_SANITY_CHECK
# ---------------
AC_DEFUN([AM_SANITY_CHECK],
[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftest.file
# Reject unsafe characters in $srcdir or the absolute working directory
# name. Accept space and tab only in the latter.
am_lf='
@@ -35,23 +32,30 @@ esac
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
- set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
- if test "$[*]" = "X"; then
- # -L didn't work.
- set X `ls -t "$srcdir/configure" conftest.file`
- fi
- rm -f conftest.file
- if test "$[*]" != "X $srcdir/configure conftest.file" \
- && test "$[*]" != "X conftest.file $srcdir/configure"; then
-
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
-alias in your environment])
- fi
+ for am_try in 1 2; do
+ echo timestamp > conftest.file
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ if test "$[*]" = "X"; then
+ # -L didn't work.
+ set X `ls -t "$srcdir/configure" conftest.file`
+ fi
+ rm -f conftest.file
+ if test "$[*]" != "X $srcdir/configure conftest.file" \
+ && test "$[*]" != "X conftest.file $srcdir/configure"; then
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+ alias in your environment])
+ fi
+ if test "$[2]" = conftest.file || test $am_try -eq 2; then
+ break
+ fi
+ # Just in case.
+ sleep 1
+ done
test "$[2]" = conftest.file
)
then
diff --git a/tests/Makefile.in b/tests/Makefile.in
index 7eccd1f..7a3c72b 100644
--- a/tests/Makefile.in
+++ b/tests/Makefile.in
@@ -169,6 +169,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
diff --git a/tests/README b/tests/README
index c4ff407..b264881 100644
--- a/tests/README
+++ b/tests/README
@@ -14,6 +14,7 @@ Running all tests
uniprocessor system, due to unavoidable sleep delays, as
noted below).
+
Interpretation
--------------
@@ -32,18 +33,38 @@ Interpretation
Getting details from failures
-----------------------------
- Each test is a script. In a non-VPATH build you can run them
- directly, they will be verbose. By default, verbose output of
- a test foo.test is retained in the log file foo.log. A summary
- log is created in the file test-suite.log.
+ Each test is a shell script, and by default is run by /bin/sh.
+ In a non-VPATH build you can run them directly, they will be verbose.
+ By default, verbose output of a test foo.test is retained in the log
+ file foo.log. A summary log is created in the file test-suite.log.
- You can limit the set of files using the TESTS variable, and
- enable detailed test output at the end of the test run with the
- VERBOSE variable:
+ You can limit the set of files using the TESTS variable, and enable
+ detailed test output at the end of the test run with the VERBOSE
+ variable:
env VERBOSE=x TESTS='first.test second.test ...' make -e check
+Supported shells
+----------------
+
+ The test scripts are written with portability in mind, so that they
+ should run with any decent Bourne-compatible shell.
+
+ However, some care must be used with Zsh, since, when not directly
+ starting in Bourne-compatibility mode, it has some incompatibilities
+ in the handling of `$0' which conflict with our usage, and which have
+ no easy workaround. Thus, if you want to run a test script, say
+ foo.test, with Zsh, you *can't* simply do `zsh foo.test', but you
+ *must* resort to:
+ zsh --no-function-argzero foo.test
+
+ Note that this problem does not occur if zsh is executed through a
+ symlink with a basename of `sh', since in that case it starts
+ in Bourne compatibility mode. So you should be perfectly safe when
+ /bin/sh is zsh.
+
+
Reporting failures
------------------
diff --git a/tests/defs.in b/tests/defs.in
index d1366f1..61182b6 100644
--- a/tests/defs.in
+++ b/tests/defs.in
@@ -265,8 +265,8 @@ if test "$sh_errexit_works" = yes; then
;;
esac
test "$signal" != 0 &&
- echo "$as_me: caught signal $signal"
- echo "$as_me: exit $exit_status"
+ echo "$me: caught signal $signal"
+ echo "$me: exit $exit_status"
exit $exit_status
' 0
for signal in 1 2 13 15; do
hooks/post-receive
--
GNU Automake
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Automake-commit] [SCM] GNU Automake branch, branch-1.11, updated. v1.11-25-g54d9ecc,
Ralf Wildenhues <=