[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Automake-commit] [SCM] GNU Automake branch, branch-1-10, updated. v1.10
|
From: |
Ralf Wildenhues |
|
Subject: |
[Automake-commit] [SCM] GNU Automake branch, branch-1-10, updated. v1.10.2-81-g2d04de7 |
|
Date: |
Tue, 08 Dec 2009 22:12:16 +0000 |
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "GNU Automake".
http://git.sv.gnu.org/gitweb/?p=automake.git;a=commitdiff;h=2d04de7f50160e642904ea261900d02f7e64b2e2
The branch, branch-1-10 has been updated
via 2d04de7f50160e642904ea261900d02f7e64b2e2 (commit)
via b0555544c0b2335efb17b1d1063a894203798b49 (commit)
via aed7a8c26bc9aa1566627bbd412603ddafdbe43a (commit)
via 2d42ad44984ff76f2a9b4512b635c3f7b84deee5 (commit)
via c97b75f687b609136e7e00708912783306305752 (commit)
via d63f06b950aa80d7d5d1fbebecfefbdf87323309 (commit)
via 48805b66362e72a29de0e09f5c69036fef29f599 (commit)
via 99a89e5145b33ef37604fe4ebd5a7f8c741ab30b (commit)
via 78e56845e1a19f6ad63b77b032de1c8a9272ff39 (commit)
via bd3b4940cf4c1e294d2fe274af92f31f91615fa3 (commit)
via c917f93dd97315556aa6bf2ce904b1acef0bb5b0 (commit)
via 411e607d47fbead1b524408184bca3a5c0c33b93 (commit)
via e7856a8d166dbcc4e936d85ad135c102e931eab7 (commit)
via 54b4a2f69d4e976a3a6686de465442763a0d58da (commit)
via bfb23fd24ee2ad10118c362adacc6862a9556985 (commit)
via 4d512550071f6afe5fe7d7b99109ed4b00f2cb5a (commit)
from f0f76d76bab564babeb1d241a8ae8a0bc6fdc0b6 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
commit 2d04de7f50160e642904ea261900d02f7e64b2e2
Author: Ralf Wildenhues <address@hidden>
Date: Tue Dec 8 22:01:12 2009 +0100
Post-release version bump.
* configure.ac, NEWS: Bump version to 1.10.3a.
Signed-off-by: Ralf Wildenhues <address@hidden>
commit b0555544c0b2335efb17b1d1063a894203798b49
Author: Ralf Wildenhues <address@hidden>
Date: Sun Dec 6 17:38:03 2009 +0100
Version 1.10.3.
* configure.ac, NEWS: Bump version to 1.10.3.
* doc/automake.texi (Releases): Add line for 1.10.3.
Signed-off-by: Ralf Wildenhues <address@hidden>
commit aed7a8c26bc9aa1566627bbd412603ddafdbe43a
Author: Ralf Wildenhues <address@hidden>
Date: Sun Dec 6 17:33:42 2009 +0100
Regenerate with Autoconf 2.65.
commit 2d42ad44984ff76f2a9b4512b635c3f7b84deee5
Author: Ralf Wildenhues <address@hidden>
Date: Sun Dec 6 17:25:14 2009 +0100
Sync auxiliary files from upstream.
* INSTALL, lib/INSTALL, lib/config.guess, lib/config.sub,
lib/texinfo.tex: Sync from upstream.
Signed-off-by: Ralf Wildenhues <address@hidden>
commit c97b75f687b609136e7e00708912783306305752
Author: Ralf Wildenhues <address@hidden>
Date: Sun Dec 6 17:23:26 2009 +0100
Update NEWS.
* NEWS: Update.
Signed-off-by: Ralf Wildenhues <address@hidden>
commit d63f06b950aa80d7d5d1fbebecfefbdf87323309
Author: Ralf Wildenhues <address@hidden>
Date: Sat Dec 5 14:13:43 2009 +0100
Do not rely on Perl symlink status, for MSYS perl.
* automake.in (require_file_internal): Ensure presence of
symlink target file; MSYS perl symlink doesn't return an error
status when the file could not be created (copied, on this
system). Fixes symlink.test failure.
Signed-off-by: Ralf Wildenhues <address@hidden>
commit 48805b66362e72a29de0e09f5c69036fef29f599
Author: Karl Berry <address@hidden>
Date: Sun Nov 29 21:48:13 2009 +0100
Rewrite `gnupload --help' examples.
* lib/gnupload: Use GNU style version numbers, a generic package
name, and more useful examples.
Signed-off-by: Ralf Wildenhues <address@hidden>
commit 99a89e5145b33ef37604fe4ebd5a7f8c741ab30b
Author: Jim Meyering <address@hidden>
Date: Sun Nov 29 20:35:03 2009 +0100
avoid a warning from perl-5.11
* lib/Automake/Wrap.pm (_tab_length): Remove useless use of tr's
"/d" modifier.
Signed-off-by: Ralf Wildenhues <address@hidden>
commit 78e56845e1a19f6ad63b77b032de1c8a9272ff39
Author: Ralf Wildenhues <address@hidden>
Date: Sat Nov 14 14:05:38 2009 +0100
Distribute the Automake bootstrap script.
* Makefile.am (EXTRA_DIST): Add bootstrap.
Report by Jan Engelhardt.
Signed-off-by: Ralf Wildenhues <address@hidden>
commit bd3b4940cf4c1e294d2fe274af92f31f91615fa3
Author: Jim Meyering <address@hidden>
Date: Sat Oct 31 17:47:58 2009 +0100
Don't let an envvar setting of "$fail" cause build failure.
Without this change, in a project using an automake-generated
Makefile, "make fail=anything" would fail inappropriately,
due to the `test -z "$$fail"' at the end of this emitted rule:
* lib/am/subdirs.am ($(RECURSIVE_TARGETS)): Initialize "fail=" to keep
an envvar setting of that variable from causing unwarranted failure.
($(RECURSIVE_CLEAN_TARGETS)): Likewise.
* tests/subdir10.test: New test.
* tests/Makefile.am: Update.
Signed-off-by: Ralf Wildenhues <address@hidden>
commit c917f93dd97315556aa6bf2ce904b1acef0bb5b0
Author: Ralf Wildenhues <address@hidden>
Date: Sun Oct 11 13:44:37 2009 +0200
Improve description of the various *LINK variables.
* doc/automake.texi (Program and Library Variables): _LINK also
receives libraries to link against. _LINK may be generated.
(Program Variables): Document reasons when per-target _LINK is
used instead of LINK.
(How the Linker is Chosen): Document how a per-target _LINK
variable and per-target link flags override linker selection.
* THANKS: Update.
Report by Dave Korn against gcc/libstdc++-v3.
Signed-off-by: Ralf Wildenhues <address@hidden>
commit 411e607d47fbead1b524408184bca3a5c0c33b93
Author: Bruno Haible <address@hidden>
Date: Tue Oct 6 22:03:33 2009 +0200
Fix 'compile' script to not call mv when target equals source.
* lib/compile: Don't attempt to move the generated file to its
target destination when it is already at the target destination.
Avoids an mv failure with subdir-objects.
* tests/ccnoco3.test: New test.
* tests/Makefile.am: Adjust.
Signed-off-by: Ralf Wildenhues <address@hidden>
commit e7856a8d166dbcc4e936d85ad135c102e931eab7
Author: Ralf Wildenhues <address@hidden>
Date: Fri Sep 18 20:13:14 2009 +0200
Update git attributes for texinfo files.
* .gitattributes: Annotate *.texi* files for texinfo diff.
Signed-off-by: Ralf Wildenhues <address@hidden>
commit 54b4a2f69d4e976a3a6686de465442763a0d58da
Author: Peter Johansson <address@hidden>
Date: Fri Sep 18 20:11:36 2009 +0200
Fix link to "Recursive Make Considered Harmful" paper.
* doc/automake.texi (Alternative): Fix broken URL.
Signed-off-by: Ralf Wildenhues <address@hidden>
commit bfb23fd24ee2ad10118c362adacc6862a9556985
Author: Reuben Thomas <address@hidden>
Date: Fri Sep 11 19:41:22 2009 +0200
Fix outdated reference to sh-utils in the manual.
* doc/automake.texi (Options): The reference to `sh-utils'
should be to `coreutils'.
Signed-off-by: Ralf Wildenhues <address@hidden>
commit 4d512550071f6afe5fe7d7b99109ed4b00f2cb5a
Author: Jim Meyering <address@hidden>
Date: Tue Dec 1 21:07:55 2009 +0100
do not put world-writable directories in distribution tarballs
* lib/am/distdir.am (distdir): Do not make all directories
group- or world-writable. Instead, use 755.
* NEWS: Update.
Signed-off-by: Ralf Wildenhues <address@hidden>
-----------------------------------------------------------------------
Summary of changes:
.gitattributes | 1 +
ChangeLog | 93 ++
INSTALL | 97 ++-
Makefile.am | 1 +
Makefile.in | 11 +-
NEWS | 14 +-
THANKS | 1 +
aclocal.m4 | 6 +-
automake.in | 3 +-
configure | 1553 +++++++++++++++-----------------
configure.ac | 4 +-
doc/Makefile.in | 3 +-
doc/automake.texi | 25 +-
lib/Automake/Makefile.in | 7 +-
lib/Automake/Wrap.pm | 2 +-
lib/Automake/tests/Makefile.in | 3 +-
lib/INSTALL | 97 ++-
lib/Makefile.in | 7 +-
lib/am/Makefile.in | 3 +-
lib/am/distdir.am | 9 +-
lib/am/subdirs.am | 4 +-
lib/compile | 6 +-
lib/config.guess | 206 ++---
lib/config.sub | 44 +-
lib/gnupload | 48 +-
lib/texinfo.tex | 34 +-
m4/Makefile.in | 3 +-
m4/amversion.m4 | 4 +-
tests/Makefile.am | 2 +
tests/Makefile.in | 5 +-
tests/ccnoco3.test | 81 ++
tests/{libtoo11.test => subdir10.test} | 27 +-
32 files changed, 1309 insertions(+), 1095 deletions(-)
create mode 100755 tests/ccnoco3.test
copy tests/{libtoo11.test => subdir10.test} (63%)
diff --git a/.gitattributes b/.gitattributes
index e8495d5..b6c3614 100644
--- a/.gitattributes
+++ b/.gitattributes
@@ -1 +1,2 @@
ChangeLog merge=merge-changelog
+*.texi* diff=texinfo
diff --git a/ChangeLog b/ChangeLog
index 66c6946..dbd1445 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,96 @@
+2009-12-08 Ralf Wildenhues <address@hidden>
+
+ * configure.ac, NEWS: Bump version to 1.10.3a.
+
+2009-12-06 Ralf Wildenhues <address@hidden>
+
+ * configure.ac, NEWS: Bump version to 1.10.3.
+ * doc/automake.texi (Releases): Add line for 1.10.3.
+
+ * INSTALL, lib/INSTALL, lib/config.guess, lib/config.sub,
+ lib/texinfo.tex: Sync from upstream.
+
+ * NEWS: Update.
+
+2009-12-05 Ralf Wildenhues <address@hidden>
+
+ Do not rely on Perl symlink status, for MSYS perl.
+ * automake.in (require_file_internal): Ensure presence of
+ symlink target file; MSYS perl symlink doesn't return an error
+ status when the file could not be created (copied, on this
+ system). Fixes symlink.test failure.
+
+2009-11-29 Karl Berry <address@hidden>
+
+ Rewrite `gnupload --help' examples.
+ * lib/gnupload: Use GNU style version numbers, a generic package
+ name, and more useful examples.
+
+2009-11-28 Jim Meyering <address@hidden>
+
+ avoid a warning from perl-5.11
+ * lib/Automake/Wrap.pm (_tab_length): Remove useless use of tr's
+ "/d" modifier.
+
+2009-11-14 Ralf Wildenhues <address@hidden>
+
+ Distribute the Automake bootstrap script.
+ * Makefile.am (EXTRA_DIST): Add bootstrap.
+ Report by Jan Engelhardt.
+
+2009-10-31 Jim Meyering <address@hidden>
+ Ralf Wildenhues <address@hidden>
+
+ Don't let an envvar setting of "$fail" cause build failure.
+ Without this change, in a project using an automake-generated
+ Makefile, "make fail=anything" would fail inappropriately,
+ due to the `test -z "$$fail"' at the end of this emitted rule:
+ * lib/am/subdirs.am ($(RECURSIVE_TARGETS)): Initialize "fail=" to keep
+ an envvar setting of that variable from causing unwarranted failure.
+ ($(RECURSIVE_CLEAN_TARGETS)): Likewise.
+ * tests/subdir10.test: New test.
+ * tests/Makefile.am: Update.
+
+2009-10-11 Ralf Wildenhues <address@hidden>
+
+ Improve description of the various *LINK variables.
+ * doc/automake.texi (Program and Library Variables): _LINK also
+ receives libraries to link against. _LINK may be generated.
+ (Program Variables): Document reasons when per-target _LINK is
+ used instead of LINK.
+ (How the Linker is Chosen): Document how a per-target _LINK
+ variable and per-target link flags override linker selection.
+ * THANKS: Update.
+ Report by Dave Korn against gcc/libstdc++-v3.
+
+2009-10-06 Bruno Haible <address@hidden>
+ Ralf Wildenhues <address@hidden>
+
+ Fix 'compile' script to not call mv when target equals source.
+ * lib/compile: Don't attempt to move the generated file to its
+ target destination when it is already at the target destination.
+ Avoids an mv failure with subdir-objects.
+ * tests/ccnoco3.test: New test.
+ * tests/Makefile.am: Adjust.
+
+2009-09-18 Peter Johansson <address@hidden> (tiny change)
+
+ Fix link to "Recursive Make Considered Harmful" paper.
+ * doc/automake.texi (Alternative): Fix broken URL.
+
+2009-09-11 Reuben Thomas <address@hidden> (tiny patch)
+
+ Fix outdated reference to sh-utils in the manual.
+ * doc/automake.texi (Options): The reference to `sh-utils'
+ should be to `coreutils'.
+
+2009-11-28 Jim Meyering <address@hidden>
+
+ do not put world-writable directories in distribution tarballs
+ * lib/am/distdir.am (distdir): Do not make all directories
+ group- or world-writable. Instead, use 755.
+ * NEWS: Update.
+
2009-07-08 Jim Meyering <address@hidden>
manual: fix a trivial grammar error.
diff --git a/INSTALL b/INSTALL
index 2550dab..7d1c323 100644
--- a/INSTALL
+++ b/INSTALL
@@ -4,8 +4,10 @@ Installation Instructions
Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
2006, 2007, 2008, 2009 Free Software Foundation, Inc.
- This file is free documentation; the Free Software Foundation gives
-unlimited permission to copy, distribute and modify it.
+ Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved. This file is offered as-is,
+without warranty of any kind.
Basic Installation
==================
@@ -13,7 +15,11 @@ Basic Installation
Briefly, the shell commands `./configure; make; make install' should
configure, build, and install this package. The following
more-detailed instructions are generic; see the `README' file for
-instructions specific to this package.
+instructions specific to this package. Some packages provide this
+`INSTALL' file but do not implement all of the features documented
+below. The lack of an optional feature in a given package is not
+necessarily a bug. More recommendations for GNU packages can be found
+in *note Makefile Conventions: (standards)Makefile Conventions.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
@@ -42,7 +48,7 @@ may remove or edit it.
you want to change it or regenerate `configure' using a newer version
of `autoconf'.
-The simplest way to compile this package is:
+ The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
`./configure' to configure the package for your system.
@@ -53,12 +59,22 @@ The simplest way to compile this package is:
2. Type `make' to compile the package.
3. Optionally, type `make check' to run any self-tests that come with
- the package.
+ the package, generally using the just-built uninstalled binaries.
4. Type `make install' to install the programs and any data files and
- documentation.
-
- 5. You can remove the program binaries and object files from the
+ documentation. When installing into a prefix owned by root, it is
+ recommended that the package be configured and built as a regular
+ user, and only the `make install' phase executed with root
+ privileges.
+
+ 5. Optionally, type `make installcheck' to repeat any self-tests, but
+ this time using the binaries in their final installed location.
+ This target does not install anything. Running this target as a
+ regular user, particularly if the prior `make install' required
+ root privileges, verifies that the installation completed
+ correctly.
+
+ 6. You can remove the program binaries and object files from the
source code directory by typing `make clean'. To also remove the
files that `configure' created (so you can compile the package for
a different kind of computer), type `make distclean'. There is
@@ -67,8 +83,15 @@ The simplest way to compile this package is:
all sorts of other programs in order to regenerate files that came
with the distribution.
- 6. Often, you can also type `make uninstall' to remove the installed
- files again.
+ 7. Often, you can also type `make uninstall' to remove the installed
+ files again. In practice, not all packages have tested that
+ uninstallation works correctly, even though it is required by the
+ GNU Coding Standards.
+
+ 8. Some packages, particularly those that use Automake, provide `make
+ distcheck', which can by used by developers to test that all other
+ targets like `make install' and `make uninstall' work correctly.
+ This target is generally not run by end users.
Compilers and Options
=====================
@@ -93,7 +116,8 @@ same time, by placing the object files for each architecture
in their
own directory. To do this, you can use GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
+source code in the directory that `configure' is in and in `..'. This
+is known as a "VPATH" build.
With a non-GNU `make', it is safer to compile the package for one
architecture at a time in the source code directory. After you have
@@ -120,7 +144,8 @@ Installation Names
By default, `make install' installs the package's commands under
`/usr/local/bin', include files under `/usr/local/include', etc. You
can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX'.
+`configure' the option `--prefix=PREFIX', where PREFIX must be an
+absolute file name.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
@@ -131,15 +156,46 @@ Documentation and other data files still use the regular
prefix.
In addition, if you use an unusual directory layout you can give
options like `--bindir=DIR' to specify different values for particular
kinds of files. Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
+you can set and what kinds of files go in them. In general, the
+default for these options is expressed in terms of `${prefix}', so that
+specifying just `--prefix' will affect all of the other directory
+specifications that were not explicitly provided.
+
+ The most portable way to affect installation locations is to pass the
+correct locations to `configure'; however, many packages provide one or
+both of the following shortcuts of passing variable assignments to the
+`make install' command line to change installation locations without
+having to reconfigure or recompile.
+
+ The first method involves providing an override variable for each
+affected directory. For example, `make install
+prefix=/alternate/directory' will choose an alternate location for all
+directory configuration variables that were expressed in terms of
+`${prefix}'. Any directories that were specified during `configure',
+but not in terms of `${prefix}', must each be overridden at install
+time for the entire installation to be relocated. The approach of
+makefile variable overrides for each directory variable is required by
+the GNU Coding Standards, and ideally causes no recompilation.
+However, some platforms have known limitations with the semantics of
+shared libraries that end up requiring recompilation when using this
+method, particularly noticeable in packages that use GNU Libtool.
+
+ The second method involves providing the `DESTDIR' variable. For
+example, `make install DESTDIR=/alternate/directory' will prepend
+`/alternate/directory' before all installation names. The approach of
+`DESTDIR' overrides is not required by the GNU Coding Standards, and
+does not work on platforms that have drive letters. On the other hand,
+it does better at avoiding recompilation issues, and works well even
+when some directory options were not specified in terms of `${prefix}'
+at `configure' time.
+
+Optional Features
+=================
If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-Optional Features
-=================
-
Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
@@ -152,6 +208,13 @@ find the X include and library files automatically, but if
it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.
+ Some packages offer the ability to configure how verbose the
+execution of `make' will be. For these packages, running `./configure
+--enable-silent-rules' sets the default to minimal output, which can be
+overridden with `make V=1'; while running `./configure
+--disable-silent-rules' sets the default to verbose, which can be
+overridden with `make V=0'.
+
Particular systems
==================
@@ -288,7 +351,7 @@ operates.
`configure' can determine that directory automatically.
`--prefix=DIR'
- Use DIR as the installation prefix. *Note Installation Names::
+ Use DIR as the installation prefix. *note Installation Names::
for more details, including other options available for fine-tuning
the installation locations.
diff --git a/Makefile.am b/Makefile.am
index 0086243..bb575d3 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -41,6 +41,7 @@ EXTRA_DIST = \
ChangeLog.02 \
ChangeLog.03 \
ChangeLog.04 \
+ bootstrap \
$(AUTOMAKESOURCES)
## Make versioned links. We only run the transform on the root name;
diff --git a/Makefile.in b/Makefile.in
index 146f06d..061d55a 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -1,4 +1,4 @@
-# Makefile.in generated by automake 1.10.2a from Makefile.am.
+# Makefile.in generated by automake 1.10.3a from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@@ -111,6 +111,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
@@ -177,6 +178,7 @@ EXTRA_DIST = \
ChangeLog.02 \
ChangeLog.03 \
ChangeLog.04 \
+ bootstrap \
$(AUTOMAKESOURCES)
do_subst = sed \
@@ -266,7 +268,7 @@ uninstall-binSCRIPTS:
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
- @failcom='exit 1'; \
+ @fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
@@ -291,7 +293,7 @@ $(RECURSIVE_TARGETS):
fi; test -z "$$fail"
$(RECURSIVE_CLEAN_TARGETS):
- @failcom='exit 1'; \
+ @fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
@@ -437,7 +439,8 @@ distdir: $(DISTFILES)
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$(top_distdir)" distdir="$(distdir)" \
dist-hook
- -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+ -find "$(distdir)" -type d ! -perm -755 \
+ -exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
diff --git a/NEWS b/NEWS
index 4a8726d..28fd7ec 100644
--- a/NEWS
+++ b/NEWS
@@ -1,10 +1,15 @@
-New in 1.10.2a:
+New in 1.10.3a:
+
+Bugs fixed in 1.10.3a:
+
+
+New in 1.10.3:
- The `gnupload' script has been revamped.
- The `depcomp' and `compile' scripts now work with MSVC under MSYS.
-Bugs fixed in 1.10.2a:
+Bugs fixed in 1.10.3:
* Long standing bugs:
@@ -43,6 +48,11 @@ Bugs fixed in 1.10.2a:
- AM_PROG_GCJ uses AC_CHECK_TOOLS to look for `gcj' now, so that prefixed
tools are preferred in a cross-compile setup.
+ - The distribution is tarred up with mode 755 now by the `dist*' targets.
+ This fixes a race condition where untrusted users could modify files
+ in the $(PACKAGE)-$(VERSION) distdir before packing if the toplevel
+ build directory was world-searchable. This is CVE-2009-4029.
+
* Bugs introduced by 1.10.2:
- The manual wrongly contained portions of the 1.11a manual.
diff --git a/THANKS b/THANKS
index e43bf63..269a264 100644
--- a/THANKS
+++ b/THANKS
@@ -62,6 +62,7 @@ danbp address@hidden
Daniel Jacobowitz address@hidden
Daniel Kahn Gillmor address@hidden
Dave Brolley address@hidden
+Dave Korn address@hidden
Dave Morrison address@hidden
David A. Swierczek address@hidden
David Byron address@hidden
diff --git a/aclocal.m4 b/aclocal.m4
index a0d978b..58cf565 100644
--- a/aclocal.m4
+++ b/aclocal.m4
@@ -1,4 +1,4 @@
-# generated automatically by aclocal 1.10.2a -*- Autoconf -*-
+# generated automatically by aclocal 1.10.3a -*- Autoconf -*-
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
# 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
@@ -13,8 +13,8 @@
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.63],,
-[m4_warning([this file was generated for autoconf 2.63.
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.65],,
+[m4_warning([this file was generated for autoconf 2.65.
You have another version of autoconf. It may work, but is not guaranteed to.
If you have problems, you may need to regenerate the build system entirely.
To do so, use the procedure documented by the package, typically
`autoreconf'.])])
diff --git a/automake.in b/automake.in
index a0d4eed..41837d6 100755
--- a/automake.in
+++ b/automake.in
@@ -7225,7 +7225,8 @@ sub require_file_internal ($$$@)
unlink ($fullfile) if -f $fullfile;
if ($symlink_exists && ! $copy_missing)
{
- if (! symlink ("$libdir/$file", $fullfile))
+ if (! symlink ("$libdir/$file", $fullfile)
+ || ! -e $fullfile)
{
$suppress = 0;
$trailer = "; error while making link: $!";
diff --git a/configure b/configure
index 8b74e80..840a1c4 100755
--- a/configure
+++ b/configure
@@ -1,20 +1,24 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.63 for GNU Automake 1.10.2a.
+# Generated by GNU Autoconf 2.65 for GNU Automake 1.10.3a.
#
# Report bugs to <address@hidden>.
#
+#
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
+#
+#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
-## --------------------- ##
-## M4sh Initialization. ##
-## --------------------- ##
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
# Be more Bourne compatible
DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
emulate sh
NULLCMD=:
# Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
@@ -22,23 +26,15 @@ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null
2>&1; then
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
else
- case `(set -o) 2>/dev/null` in
- *posix*) set -o posix ;;
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
esac
-
fi
-
-
-# PATH needs CR
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
as_nl='
'
export as_nl
@@ -46,7 +42,13 @@ export as_nl
as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
as_echo='printf %s\n'
as_echo_n='printf %s'
else
@@ -57,7 +59,7 @@ else
as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
as_echo_n_body='eval
arg=$1;
- case $arg in
+ case $arg in #(
*"$as_nl"*)
expr "X$arg" : "X\\(.*\\)$as_nl";
arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
@@ -80,13 +82,6 @@ if test "${PATH_SEPARATOR+set}" != set; then
}
fi
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
- as_unset=unset
-else
- as_unset=false
-fi
-
# IFS
# We need space, tab and new line, in precisely that order. Quoting is
@@ -96,15 +91,15 @@ fi
IFS=" "" $as_nl"
# Find who we are. Look in the path if we contain no directory separator.
-case $0 in
+case $0 in #((
*[\\/]* ) as_myself=$0 ;;
*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
IFS=$as_save_IFS
;;
@@ -116,12 +111,16 @@ if test "x$as_myself" = x; then
fi
if test ! -f "$as_myself"; then
$as_echo "$as_myself: error: cannot find myself; rerun with an absolute file
name" >&2
- { (exit 1); exit 1; }
+ exit 1
fi
-# Work around bugs in pre-3.0 UWIN ksh.
-for as_var in ENV MAIL MAILPATH
-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
done
PS1='$ '
PS2='> '
@@ -133,330 +132,300 @@ export LC_ALL
LANGUAGE=C
export LANGUAGE
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
- }
- /^X\/\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\/\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
-
# CDPATH.
-$as_unset CDPATH
-
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
if test "x$CONFIG_SHELL" = x; then
- if (eval ":") 2>/dev/null; then
- as_have_required=yes
+ as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh)
>/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on \${1+\"address@hidden"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"address@hidden"}'='\"address@hidden"'
+ setopt NO_GLOB_SUBST
else
- as_have_required=no
+ case \`(set -o) 2>/dev/null\` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
fi
-
- if test $as_have_required = yes && (eval ":
-(as_func_return () {
- (exit \$1)
-}
-as_func_success () {
- as_func_return 0
-}
-as_func_failure () {
- as_func_return 1
-}
-as_func_ret_success () {
- return 0
-}
-as_func_ret_failure () {
- return 1
-}
+"
+ as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
exitcode=0
-if as_func_success; then
- :
-else
- exitcode=1
- echo as_func_success failed.
-fi
-
-if as_func_failure; then
- exitcode=1
- echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
- :
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+ exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1"
+ as_suggested="
as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested"
as_lineno_1a=\$LINENO
+ as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested"
as_lineno_2a=\$LINENO
+ eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+ test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" =
\"x\$as_lineno_2'\$as_run'\"' || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+ if (eval "$as_required") 2>/dev/null; then :
+ as_have_required=yes
else
- exitcode=1
- echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
- exitcode=1
- echo as_func_ret_failure succeeded.
+ as_have_required=no
fi
+ if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null;
then :
-if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
- :
else
- exitcode=1
- echo positional parameters were not saved.
-fi
-
-test \$exitcode = 0) || { (exit 1); exit 1; }
-
-(
- as_lineno_1=\$LINENO
- as_lineno_2=\$LINENO
- test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
- test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1);
exit 1; }
-") 2> /dev/null; then
- :
-else
- as_candidate_shells=
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- case $as_dir in
+ as_found=:
+ case $as_dir in #(
/*)
for as_base in sh bash ksh sh5; do
- as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
+ # Try only shells that exist, to save several forks.
+ as_shell=$as_dir/$as_base
+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a
"$as_shell"; } 2>/dev/null; then :
+ CONFIG_SHELL=$as_shell as_have_required=yes
+ if { $as_echo "$as_bourne_compatible""$as_suggested" |
as_run=a "$as_shell"; } 2>/dev/null; then :
+ break 2
+fi
+fi
done;;
esac
+ as_found=false
done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a
"$SHELL"; } 2>/dev/null; then :
+ CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
IFS=$as_save_IFS
- for as_shell in $as_candidate_shells $SHELL; do
- # Try only shells that exist, to save several forks.
- if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
- { ("$as_shell") 2> /dev/null <<\_ASEOF
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in
- *posix*) set -o posix ;;
-esac
-
-fi
-
-
-:
-_ASEOF
-}; then
- CONFIG_SHELL=$as_shell
- as_have_required=yes
- if { "$as_shell" 2> /dev/null <<\_ASEOF
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in
- *posix*) set -o posix ;;
-esac
-
-fi
-
-
-:
-(as_func_return () {
- (exit $1)
-}
-as_func_success () {
- as_func_return 0
-}
-as_func_failure () {
- as_func_return 1
-}
-as_func_ret_success () {
- return 0
-}
-as_func_ret_failure () {
- return 1
-}
-
-exitcode=0
-if as_func_success; then
- :
-else
- exitcode=1
- echo as_func_success failed.
-fi
-
-if as_func_failure; then
- exitcode=1
- echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
- :
-else
- exitcode=1
- echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
- exitcode=1
- echo as_func_ret_failure succeeded.
-fi
-
-if ( set x; as_func_ret_success y && test x = "$1" ); then
- :
-else
- exitcode=1
- echo positional parameters were not saved.
-fi
-
-test $exitcode = 0) || { (exit 1); exit 1; }
-
-(
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
-
-_ASEOF
-}; then
- break
-fi
-
-fi
-
- done
-
- if test "x$CONFIG_SHELL" != x; then
- for as_var in BASH_ENV ENV
- do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
- done
+ if test "x$CONFIG_SHELL" != x; then :
+ # We cannot yet assume a decent shell, so we have to provide a
+ # neutralization value for shells without unset; and this also
+ # works around shells that cannot unset nonexistent variables.
+ BASH_ENV=/dev/null
+ ENV=/dev/null
+ (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
export CONFIG_SHELL
exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
fi
-
- if test $as_have_required = no; then
- echo This script requires a shell more modern than all the
- echo shells that I found on your system. Please install a
- echo modern shell, or manually run the script under such a
- echo shell if you do have one.
- { (exit 1); exit 1; }
+ if test x$as_have_required = xno; then :
+ $as_echo "$0: This script requires a shell more modern than all"
+ $as_echo "$0: the shells that I found on your system."
+ if test x${ZSH_VERSION+set} = xset ; then
+ $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+ $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+ else
+ $as_echo "$0: Please tell address@hidden and
+$0: address@hidden about your system, including any
+$0: error possibly output before this message. Then install
+$0: a modern shell, or manually run the script under such a
+$0: shell if you do have one."
+ fi
+ exit 1
fi
-
-
fi
-
fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
-(eval "as_func_return () {
- (exit \$1)
-}
-as_func_success () {
- as_func_return 0
-}
-as_func_failure () {
- as_func_return 1
-}
-as_func_ret_success () {
- return 0
-}
-as_func_ret_failure () {
- return 1
-}
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
-exitcode=0
-if as_func_success; then
- :
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
else
- exitcode=1
- echo as_func_success failed.
-fi
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
-if as_func_failure; then
- exitcode=1
- echo as_func_failure succeeded.
-fi
-if as_func_ret_success; then
- :
+# as_fn_error ERROR [LINENO LOG_FD]
+# ---------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with status $?, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$?; test $as_status -eq 0 && as_status=1
+ if test "$3"; then
+ as_lineno=${as_lineno-"$2"}
as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+ fi
+ $as_echo "$as_me: error: $1" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
else
- exitcode=1
- echo as_func_ret_success failed.
+ as_expr=false
fi
-if as_func_ret_failure; then
- exitcode=1
- echo as_func_ret_failure succeeded.
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
fi
-if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
- :
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
else
- exitcode=1
- echo positional parameters were not saved.
+ as_dirname=false
fi
-test \$exitcode = 0") || {
- echo No shell found that supports shell functions.
- echo Please tell address@hidden about your system,
- echo including any error possibly output before this message.
- echo This can help us improve future autoconf versions.
- echo Configuration will now proceed without shell functions.
-}
-
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
- # uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line after each line using $LINENO; the second 'sed'
- # does the real work. The second script uses 'N' to pair each
- # line-number line with the line containing $LINENO, and appends
- # trailing '-' during substitution so that $LINENO is not a special
- # case at line end.
- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # scripts with optimization help from Paolo Bonzini. Blame Lee
- # E. McMahon (1931-1989) for sed's syntax. :-)
+ as_lineno_1=$LINENO as_lineno_1a=$LINENO
+ as_lineno_2=$LINENO as_lineno_2a=$LINENO
+ eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+ test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+ # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
sed -n '
p
/[$]LINENO/=
@@ -473,8 +442,7 @@ test \$exitcode = 0") || {
s/-\n.*//
' >$as_me.lineno &&
chmod +x "$as_me.lineno" ||
- { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX
shell" >&2
- { (exit 1); exit 1; }; }
+ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX
shell" >&2; as_fn_exit 1; }
# Don't try to exec as it changes $[0], causing all sort of problems
# (the dirname of $[0] is not the place where we might find the
@@ -484,29 +452,18 @@ test \$exitcode = 0") || {
exit
}
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
-
ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in
+case `echo -n x` in #(((((
-n*)
- case `echo 'x\c'` in
+ case `echo 'xy\c'` in
*c*) ECHO_T=' ';; # ECHO_T is single tab character.
- *) ECHO_C='\c';;
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
esac;;
*)
ECHO_N='-n';;
esac
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
rm -f conf$$ conf$$.exe conf$$.file
if test -d conf$$.dir; then
@@ -536,7 +493,7 @@ rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null
if mkdir -p . 2>/dev/null; then
- as_mkdir_p=:
+ as_mkdir_p='mkdir -p "$as_dir"'
else
test -d ./-p && rmdir ./-p
as_mkdir_p=false
@@ -555,10 +512,10 @@ else
if test -d "$1"; then
test -d "$1/.";
else
- case $1 in
+ case $1 in #(
-*)set "./$1";;
esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
???[sx]*):;;*)false;;esac;fi
'\'' sh
'
@@ -572,8 +529,8 @@ as_tr_cpp="eval sed
'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-exec 7<&0 </dev/null 6>&1
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
# Name of the host.
# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
@@ -591,14 +548,14 @@ cross_compiling=no
subdirs=
MFLAGS=
MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
# Identity of this package.
PACKAGE_NAME='GNU Automake'
PACKAGE_TARNAME='automake'
-PACKAGE_VERSION='1.10.2a'
-PACKAGE_STRING='GNU Automake 1.10.2a'
+PACKAGE_VERSION='1.10.3a'
+PACKAGE_STRING='GNU Automake 1.10.3a'
PACKAGE_BUGREPORT='address@hidden'
+PACKAGE_URL='http://www.gnu.org/software/automake/'
ac_unique_file="automake.in"
ac_subst_vars='LTLIBOBJS
@@ -670,6 +627,7 @@ bindir
program_transform_name
prefix
exec_prefix
+PACKAGE_URL
PACKAGE_BUGREPORT
PACKAGE_STRING
PACKAGE_VERSION
@@ -792,8 +750,7 @@ do
ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
- { (exit 1); exit 1; }; }
+ as_fn_error "invalid feature name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
@@ -819,8 +776,7 @@ do
ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
- { (exit 1); exit 1; }; }
+ as_fn_error "invalid feature name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
@@ -1024,8 +980,7 @@ do
ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
- { (exit 1); exit 1; }; }
+ as_fn_error "invalid package name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
@@ -1041,8 +996,7 @@ do
ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
- { (exit 1); exit 1; }; }
+ as_fn_error "invalid package name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
@@ -1072,17 +1026,17 @@ do
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
x_libraries=$ac_optarg ;;
- -*) { $as_echo "$as_me: error: unrecognized option: $ac_option
-Try \`$0 --help' for more information." >&2
- { (exit 1); exit 1; }; }
+ -*) as_fn_error "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information."
;;
*=*)
ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
# Reject names that are not valid shell variable names.
- expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
- { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2
- { (exit 1); exit 1; }; }
+ case $ac_envvar in #(
+ '' | [0-9]* | *[!_$as_cr_alnum]* )
+ as_fn_error "invalid variable name: \`$ac_envvar'" ;;
+ esac
eval $ac_envvar=\$ac_optarg
export $ac_envvar ;;
@@ -1099,15 +1053,13 @@ done
if test -n "$ac_prev"; then
ac_option=--`echo $ac_prev | sed 's/_/-/g'`
- { $as_echo "$as_me: error: missing argument to $ac_option" >&2
- { (exit 1); exit 1; }; }
+ as_fn_error "missing argument to $ac_option"
fi
if test -n "$ac_unrecognized_opts"; then
case $enable_option_checking in
no) ;;
- fatal) { $as_echo "$as_me: error: unrecognized options:
$ac_unrecognized_opts" >&2
- { (exit 1); exit 1; }; } ;;
+ fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;;
*) $as_echo "$as_me: WARNING: unrecognized options:
$ac_unrecognized_opts" >&2 ;;
esac
fi
@@ -1130,8 +1082,7 @@ do
[\\/$]* | ?:[\\/]* ) continue;;
NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
esac
- { $as_echo "$as_me: error: expected an absolute directory name for
--$ac_var: $ac_val" >&2
- { (exit 1); exit 1; }; }
+ as_fn_error "expected an absolute directory name for --$ac_var: $ac_val"
done
# There might be people who depend on the old broken behavior: `$host'
@@ -1161,11 +1112,9 @@ test "$silent" = yes && exec 6>/dev/null
ac_pwd=`pwd` && test -n "$ac_pwd" &&
ac_ls_di=`ls -di .` &&
ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
- { $as_echo "$as_me: error: working directory cannot be determined" >&2
- { (exit 1); exit 1; }; }
+ as_fn_error "working directory cannot be determined"
test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
- { $as_echo "$as_me: error: pwd does not report name of working directory" >&2
- { (exit 1); exit 1; }; }
+ as_fn_error "pwd does not report name of working directory"
# Find the source files, if location was not specified.
@@ -1204,13 +1153,11 @@ else
fi
if test ! -r "$srcdir/$ac_unique_file"; then
test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
- { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir"
>&2
- { (exit 1); exit 1; }; }
+ as_fn_error "cannot find sources ($ac_unique_file) in $srcdir"
fi
ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
ac_abs_confdir=`(
- cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me:
error: $ac_msg" >&2
- { (exit 1); exit 1; }; }
+ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg"
pwd)`
# When building in place, set srcdir=.
if test "$ac_abs_confdir" = "$ac_pwd"; then
@@ -1236,7 +1183,7 @@ if test "$ac_init_help" = "long"; then
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures GNU Automake 1.10.2a to adapt to many kinds of systems.
+\`configure' configures GNU Automake 1.10.3a to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1305,11 +1252,13 @@ fi
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of GNU Automake 1.10.2a:";;
+ short | recursive ) echo "Configuration of GNU Automake 1.10.3a:";;
esac
cat <<\_ACEOF
Report bugs to <address@hidden>.
+GNU Automake home page: <http://www.gnu.org/software/automake/>.
+General help using GNU software: <http://www.gnu.org/gethelp/>.
_ACEOF
ac_status=$?
fi
@@ -1372,22 +1321,25 @@ fi
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-GNU Automake configure 1.10.2a
-generated by GNU Autoconf 2.63
+GNU Automake configure 1.10.3a
+generated by GNU Autoconf 2.65
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+Copyright (C) 2009 Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.
_ACEOF
exit
fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
cat >config.log <<_ACEOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by GNU Automake $as_me 1.10.2a, which was
-generated by GNU Autoconf 2.63. Invocation command line was
+It was created by GNU Automake $as_me 1.10.3a, which was
+generated by GNU Autoconf 2.65. Invocation command line was
$ $0 $@
@@ -1423,8 +1375,8 @@ for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- $as_echo "PATH: $as_dir"
-done
+ $as_echo "PATH: $as_dir"
+ done
IFS=$as_save_IFS
} >&5
@@ -1461,9 +1413,9 @@ do
ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
case $ac_pass in
- 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
+ 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
2)
- ac_configure_args1="$ac_configure_args1 '$ac_arg'"
+ as_fn_append ac_configure_args1 " '$ac_arg'"
if test $ac_must_keep_next = true; then
ac_must_keep_next=false # Got value, back to normal.
else
@@ -1479,13 +1431,13 @@ do
-* ) ac_must_keep_next=true ;;
esac
fi
- ac_configure_args="$ac_configure_args '$ac_arg'"
+ as_fn_append ac_configure_args " '$ac_arg'"
;;
esac
done
done
-$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || {
ac_configure_args0=; export ac_configure_args0; }
-$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || {
ac_configure_args1=; export ac_configure_args1; }
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
# When interrupted or exit'd, cleanup temporary files, and complete
# config.log. We remove comments because anyway the quotes in there
@@ -1510,13 +1462,13 @@ _ASBOX
case $ac_val in #(
*${as_nl}*)
case $ac_var in #(
- *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var
contains a newline" >&5
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable
$ac_var contains a newline" >&5
$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
esac
case $ac_var in #(
_ | IFS | as_nl) ;; #(
BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
- *) $as_unset $ac_var ;;
+ *) { eval $ac_var=; unset $ac_var;} ;;
esac ;;
esac
done
@@ -1588,39 +1540,41 @@ _ASBOX
exit $exit_status
' 0
for ac_signal in 1 2 13 15; do
- trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
+ trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
done
ac_signal=0
# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -f -r conftest* confdefs.h
+$as_echo "/* confdefs.h */" > confdefs.h
+
# Predefined preprocessor variables.
cat >>confdefs.h <<_ACEOF
#define PACKAGE_NAME "$PACKAGE_NAME"
_ACEOF
-
cat >>confdefs.h <<_ACEOF
#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
_ACEOF
-
cat >>confdefs.h <<_ACEOF
#define PACKAGE_VERSION "$PACKAGE_VERSION"
_ACEOF
-
cat >>confdefs.h <<_ACEOF
#define PACKAGE_STRING "$PACKAGE_STRING"
_ACEOF
-
cat >>confdefs.h <<_ACEOF
#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
_ACEOF
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
# Let the site file select an alternate cache file if it wants to.
# Prefer an explicitly selected file to automatically selected ones.
@@ -1638,8 +1592,8 @@ fi
for ac_site_file in "$ac_site_file1" "$ac_site_file2"
do
test "x$ac_site_file" = xNONE && continue
- if test -r "$ac_site_file"; then
- { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+ if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script
$ac_site_file" >&5
$as_echo "$as_me: loading site script $ac_site_file" >&6;}
sed 's/^/| /' "$ac_site_file" >&5
. "$ac_site_file"
@@ -1647,10 +1601,10 @@ $as_echo "$as_me: loading site script $ac_site_file"
>&6;}
done
if test -r "$cache_file"; then
- # Some versions of bash will fail to source /dev/null (special
- # files actually), so we avoid doing that.
- if test -f "$cache_file"; then
- { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5
+ # Some versions of bash will fail to source /dev/null (special files
+ # actually), so we avoid doing that. DJGPP emulates it as a regular file.
+ if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
$as_echo "$as_me: loading cache $cache_file" >&6;}
case $cache_file in
[\\/]* | ?:[\\/]* ) . "$cache_file";;
@@ -1658,7 +1612,7 @@ $as_echo "$as_me: loading cache $cache_file" >&6;}
esac
fi
else
- { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
$as_echo "$as_me: creating cache $cache_file" >&6;}
>$cache_file
fi
@@ -1673,11 +1627,11 @@ for ac_var in $ac_precious_vars; do
eval ac_new_val=\$ac_env_${ac_var}_value
case $ac_old_set,$ac_new_set in
set,)
- { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val'
in the previous run" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to
\`$ac_old_val' in the previous run" >&5
$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous
run" >&2;}
ac_cache_corrupted=: ;;
,set)
- { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the
previous run" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set
in the previous run" >&5
$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
ac_cache_corrupted=: ;;
,);;
@@ -1687,17 +1641,17 @@ $as_echo "$as_me: error: \`$ac_var' was not set in the
previous run" >&2;}
ac_old_val_w=`echo x $ac_old_val`
ac_new_val_w=`echo x $ac_new_val`
if test "$ac_old_val_w" != "$ac_new_val_w"; then
- { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the
previous run:" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has
changed since the previous run:" >&5
$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
ac_cache_corrupted=:
else
- { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in
\`$ac_var' since the previous run:" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace
changes in \`$ac_var' since the previous run:" >&5
$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the
previous run:" >&2;}
eval $ac_var=\$ac_old_val
fi
- { $as_echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: former value:
\`$ac_old_val'" >&5
$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
- { $as_echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: current value:
\`$ac_new_val'" >&5
$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
fi;;
esac
@@ -1709,43 +1663,20 @@ $as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
esac
case " $ac_configure_args " in
*" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
- *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+ *) as_fn_append ac_configure_args " '$ac_arg'" ;;
esac
fi
done
if $ac_cache_corrupted; then
- { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
- { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise
the build" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment
can compromise the build" >&5
$as_echo "$as_me: error: changes in the environment can compromise the build"
>&2;}
- { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm
$cache_file' and start over" >&5
-$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and
start over" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over"
"$LINENO" 5
fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
@@ -1758,24 +1689,16 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
ac_aux_dir=
for ac_dir in lib "$srcdir"/lib; do
- if test -f "$ac_dir/install-sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f "$ac_dir/install.sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- elif test -f "$ac_dir/shtool"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
+ for ac_t in install-sh install.sh shtool; do
+ if test -f "$ac_dir/$ac_t"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/$ac_t -c"
+ break 2
+ fi
+ done
done
if test -z "$ac_aux_dir"; then
- { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in
lib \"$srcdir\"/lib" >&5
-$as_echo "$as_me: error: cannot find install-sh or install.sh in lib
\"$srcdir\"/lib" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "cannot find install-sh, install.sh, or shtool in lib
\"$srcdir\"/lib" "$LINENO" 5
fi
# These three variables are undocumented and unsupported,
@@ -1790,35 +1713,27 @@ ac_configure="$SHELL $ac_aux_dir/configure" # Please
don't use this var.
# Make sure we can run config.sub.
$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
- { { $as_echo "$as_me:$LINENO: error: cannot run $SHELL
$ac_aux_dir/config.sub" >&5
-$as_echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
-{ $as_echo "$as_me:$LINENO: checking build system type" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
$as_echo_n "checking build system type... " >&6; }
-if test "${ac_cv_build+set}" = set; then
+if test "${ac_cv_build+set}" = set; then :
$as_echo_n "(cached) " >&6
else
ac_build_alias=$build_alias
test "x$ac_build_alias" = x &&
ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
test "x$ac_build_alias" = x &&
- { { $as_echo "$as_me:$LINENO: error: cannot guess build type; you must
specify one" >&5
-$as_echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "cannot guess build type; you must specify one" "$LINENO" 5
ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
- { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub
$ac_build_alias failed" >&5
-$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed"
>&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO"
5
fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_build" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
$as_echo "$ac_cv_build" >&6; }
case $ac_cv_build in
*-*-*) ;;
-*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
-$as_echo "$as_me: error: invalid value of canonical build" >&2;}
- { (exit 1); exit 1; }; };;
+*) as_fn_error "invalid value of canonical build" "$LINENO" 5;;
esac
build=$ac_cv_build
ac_save_IFS=$IFS; IFS='-'
@@ -1857,10 +1772,10 @@ am__api_version='1.10'
# OS/2's system install, which has a completely different semantic
# ./install, which can be erroneously created by make from ./install.sh.
# Reject install programs that cannot install multiple files.
-{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible
install" >&5
$as_echo_n "checking for a BSD-compatible install... " >&6; }
if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then
+if test "${ac_cv_path_install+set}" = set; then :
$as_echo_n "(cached) " >&6
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -1868,11 +1783,11 @@ for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in
- ./ | .// | /cC/* | \
+ # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+ ./ | .// | /[cC]/* | \
/etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
- ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
+ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
/usr/ucb/* ) ;;
*)
# OSF1 and SCO ODT 3.0 have their own names for install.
@@ -1909,7 +1824,7 @@ case $as_dir/ in
;;
esac
-done
+ done
IFS=$as_save_IFS
rm -rf conftest.one conftest.two conftest.dir
@@ -1925,7 +1840,7 @@ fi
INSTALL=$ac_install_sh
fi
fi
-{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
$as_echo "$INSTALL" >&6; }
# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
@@ -1936,7 +1851,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is
sane" >&5
$as_echo_n "checking whether build environment is sane... " >&6; }
# Just in case
sleep 1
@@ -1960,11 +1875,8 @@ if (
# if, for instance, CONFIG_SHELL is bash and it inherits a
# broken ls alias from the environment. This has actually
# happened. Such a system could not be considered "sane".
- { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure
there is not a broken
-alias in your environment" >&5
-$as_echo "$as_me: error: ls -t appears to fail. Make sure there is not a
broken
-alias in your environment" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "ls -t appears to fail. Make sure there is not a broken
+alias in your environment" "$LINENO" 5
fi
test "$2" = conftest.file
@@ -1973,13 +1885,10 @@ then
# Ok.
:
else
- { { $as_echo "$as_me:$LINENO: error: newly created file is older than
distributed files!
-Check your system clock" >&5
-$as_echo "$as_me: error: newly created file is older than distributed files!
-Check your system clock" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
fi
-{ $as_echo "$as_me:$LINENO: result: yes" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
test "$program_prefix" != NONE &&
program_transform_name="s&^&$program_prefix&;$program_transform_name"
@@ -2000,7 +1909,7 @@ if eval "$MISSING --run true"; then
am_missing_run="$MISSING --run "
else
am_missing_run=
- { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or
missing" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too
old or missing" >&5
$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
fi
@@ -2014,9 +1923,9 @@ if test "$cross_compiling" != no; then
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}strip", so it can be a program
name with args.
set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then
+if test "${ac_cv_prog_STRIP+set}" = set; then :
$as_echo_n "(cached) " >&6
else
if test -n "$STRIP"; then
@@ -2027,24 +1936,24 @@ for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x
"$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_STRIP="${ac_tool_prefix}strip"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext"
>&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
fi
fi
STRIP=$ac_cv_prog_STRIP
if test -n "$STRIP"; then
- { $as_echo "$as_me:$LINENO: result: $STRIP" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
$as_echo "$STRIP" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -2054,9 +1963,9 @@ if test -z "$ac_cv_prog_STRIP"; then
ac_ct_STRIP=$STRIP
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then :
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_STRIP"; then
@@ -2067,24 +1976,24 @@ for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x
"$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_STRIP="strip"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext"
>&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
fi
fi
ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
if test -n "$ac_ct_STRIP"; then
- { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
$as_echo "$ac_ct_STRIP" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -2093,7 +2002,7 @@ fi
else
case $cross_compiling:$ac_tool_warned in
yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host
triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not
prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet"
>&2;}
ac_tool_warned=yes ;;
esac
@@ -2106,10 +2015,10 @@ fi
fi
INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p"
>&5
$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
if test -z "$MKDIR_P"; then
- if test "${ac_cv_path_mkdir+set}" = set; then
+ if test "${ac_cv_path_mkdir+set}" = set; then :
$as_echo_n "(cached) " >&6
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -2117,7 +2026,7 @@ for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_prog in mkdir gmkdir; do
+ for ac_prog in mkdir gmkdir; do
for ac_exec_ext in '' $ac_executable_extensions; do
{ test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x
"$as_dir/$ac_prog$ac_exec_ext"; } || continue
case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
@@ -2129,11 +2038,12 @@ do
esac
done
done
-done
+ done
IFS=$as_save_IFS
fi
+ test -d ./--version && rmdir ./--version
if test "${ac_cv_path_mkdir+set}" = set; then
MKDIR_P="$ac_cv_path_mkdir -p"
else
@@ -2141,11 +2051,10 @@ fi
# value for MKDIR_P within a source directory, because that will
# break other packages using the cache if that directory is
# removed, or if the value is a relative name.
- test -d ./--version && rmdir ./--version
MKDIR_P="$ac_install_sh -d"
fi
fi
-{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
$as_echo "$MKDIR_P" >&6; }
mkdir_p="$MKDIR_P"
@@ -2158,9 +2067,9 @@ for ac_prog in gawk mawk nawk awk
do
# Extract the first word of "$ac_prog", so it can be a program name with
args.
set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_AWK+set}" = set; then
+if test "${ac_cv_prog_AWK+set}" = set; then :
$as_echo_n "(cached) " >&6
else
if test -n "$AWK"; then
@@ -2171,24 +2080,24 @@ for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x
"$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_AWK="$ac_prog"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext"
>&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
fi
fi
AWK=$ac_cv_prog_AWK
if test -n "$AWK"; then
- { $as_echo "$as_me:$LINENO: result: $AWK" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
$as_echo "$AWK" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -2196,11 +2105,11 @@ fi
test -n "$AWK" && break
done
-{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets
\$(MAKE)" >&5
$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
set x ${MAKE-make}
ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" =
set"; }; then
+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" =
set"; }; then :
$as_echo_n "(cached) " >&6
else
cat >conftest.make <<\_ACEOF
@@ -2218,11 +2127,11 @@ esac
rm -f conftest.make
fi
if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
- { $as_echo "$as_me:$LINENO: result: yes" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
SET_MAKE=
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
SET_MAKE="MAKE=${MAKE-make}"
fi
@@ -2242,9 +2151,7 @@ if test "`cd $srcdir && pwd`" != "`pwd`"; then
am__isrc=' -I$(srcdir)'
# test to see if srcdir already configured
if test -f $srcdir/config.status; then
- { { $as_echo "$as_me:$LINENO: error: source directory already configured;
run \"make distclean\" there first" >&5
-$as_echo "$as_me: error: source directory already configured; run \"make
distclean\" there first" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "source directory already configured; run \"make distclean\"
there first" "$LINENO" 5
fi
fi
@@ -2260,7 +2167,7 @@ fi
# Define the identity of the package.
PACKAGE='automake'
- VERSION='1.10.2a'
+ VERSION='1.10.3a'
cat >>confdefs.h <<_ACEOF
@@ -2322,9 +2229,9 @@ AUTOMAKE="perllibdir=`pwd`\"/lib$PATH_SEPARATOR./lib\"
`pwd`/automake --libdir=l
# Extract the first word of "perl", so it can be a program name with args.
set dummy perl; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_PERL+set}" = set; then
+if test "${ac_cv_path_PERL+set}" = set; then :
$as_echo_n "(cached) " >&6
else
case $PERL in
@@ -2337,14 +2244,14 @@ for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x
"$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_path_PERL="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext"
>&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
;;
@@ -2352,37 +2259,30 @@ esac
fi
PERL=$ac_cv_path_PERL
if test -n "$PERL"; then
- { $as_echo "$as_me:$LINENO: result: $PERL" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PERL" >&5
$as_echo "$PERL" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
if test -z "$PERL"; then
- { { $as_echo "$as_me:$LINENO: error: perl not found" >&5
-$as_echo "$as_me: error: perl not found" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "perl not found" "$LINENO" 5
fi
$PERL -e 'require 5.006;' || {
- { { $as_echo "$as_me:$LINENO: error: perl 5.6 or better is required; perl
5.8.2 or better
+ as_fn_error "perl 5.6 or better is required; perl 5.8.2 or better
is recommended. If you have several perl versions
installed, select the one Automake should use using
- ./configure PERL=/path/to/perl" >&5
-$as_echo "$as_me: error: perl 5.6 or better is required; perl 5.8.2 or better
-is recommended. If you have several perl versions
-installed, select the one Automake should use using
- ./configure PERL=/path/to/perl" >&2;}
- { (exit 1); exit 1; }; }
+ ./configure PERL=/path/to/perl" "$LINENO" 5
}
# The test suite will skip some tests if tex is absent.
# Extract the first word of "tex", so it can be a program name with args.
set dummy tex; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_TEX+set}" = set; then
+if test "${ac_cv_prog_TEX+set}" = set; then :
$as_echo_n "(cached) " >&6
else
if test -n "$TEX"; then
@@ -2393,24 +2293,24 @@ for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x
"$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_TEX="tex"
- $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext"
>&5
break 2
fi
done
-done
+ done
IFS=$as_save_IFS
fi
fi
TEX=$ac_cv_prog_TEX
if test -n "$TEX"; then
- { $as_echo "$as_me:$LINENO: result: $TEX" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TEX" >&5
$as_echo "$TEX" >&6; }
else
- { $as_echo "$as_me:$LINENO: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -2422,9 +2322,9 @@ fi
# following tests, but some users were unable to figure out that their
# installation was broken since --version appeared to work.
-{ $as_echo "$as_me:$LINENO: checking whether autoconf is installed" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether autoconf is
installed" >&5
$as_echo_n "checking whether autoconf is installed... " >&6; }
-if test "${am_cv_autoconf_installed+set}" = set; then
+if test "${am_cv_autoconf_installed+set}" = set; then :
$as_echo_n "(cached) " >&6
else
if { echo "$as_me:$LINENO: eval $am_AUTOCONF --version" >&5
@@ -2438,19 +2338,16 @@ else
am_cv_autoconf_installed=no
fi
fi
-{ $as_echo "$as_me:$LINENO: result: $am_cv_autoconf_installed" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_autoconf_installed" >&5
$as_echo "$am_cv_autoconf_installed" >&6; }
if test "$am_cv_autoconf_installed" = no; then
- { { $as_echo "$as_me:$LINENO: error: Autoconf 2.60 or better is required.
- Please make sure it is installed and in your PATH." >&5
-$as_echo "$as_me: error: Autoconf 2.60 or better is required.
- Please make sure it is installed and in your PATH." >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "Autoconf 2.60 or better is required.
+ Please make sure it is installed and in your PATH." "$LINENO" 5
fi
-{ $as_echo "$as_me:$LINENO: checking whether autoconf works" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether autoconf works" >&5
$as_echo_n "checking whether autoconf works... " >&6; }
-if test "${am_cv_autoconf_works+set}" = set; then
+if test "${am_cv_autoconf_works+set}" = set; then :
$as_echo_n "(cached) " >&6
else
mkdir conftest
@@ -2467,19 +2364,16 @@ else
fi
rm -rf conftest
fi
-{ $as_echo "$as_me:$LINENO: result: $am_cv_autoconf_works" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_autoconf_works" >&5
$as_echo "$am_cv_autoconf_works" >&6; }
if test "$am_cv_autoconf_works" = no; then
- { { $as_echo "$as_me:$LINENO: error: The installed version of autoconf does
not work.
- Please check config.log for error messages before this one." >&5
-$as_echo "$as_me: error: The installed version of autoconf does not work.
- Please check config.log for error messages before this one." >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "The installed version of autoconf does not work.
+ Please check config.log for error messages before this one." "$LINENO" 5
fi
-{ $as_echo "$as_me:$LINENO: checking whether autoconf is recent enough" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether autoconf is recent
enough" >&5
$as_echo_n "checking whether autoconf is recent enough... " >&6; }
-if test "${am_cv_autoconf_version+set}" = set; then
+if test "${am_cv_autoconf_version+set}" = set; then :
$as_echo_n "(cached) " >&6
else
mkdir conftest
@@ -2496,18 +2390,16 @@ else
fi
rm -rf conftest
fi
-{ $as_echo "$as_me:$LINENO: result: $am_cv_autoconf_version" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_autoconf_version" >&5
$as_echo "$am_cv_autoconf_version" >&6; }
if test "$am_cv_autoconf_version" = no; then
- { { $as_echo "$as_me:$LINENO: error: Autoconf 2.60 or better is required."
>&5
-$as_echo "$as_me: error: Autoconf 2.60 or better is required." >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "Autoconf 2.60 or better is required." "$LINENO" 5
fi
# Test for ln. We need use it to install the versioned binaries.
-{ $as_echo "$as_me:$LINENO: checking whether ln works" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln works" >&5
$as_echo_n "checking whether ln works... " >&6; }
-if test "${am_cv_prog_ln+set}" = set; then
+if test "${am_cv_prog_ln+set}" = set; then :
$as_echo_n "(cached) " >&6
else
@@ -2525,7 +2417,7 @@ LN=$am_cv_prog_ln
result=no
test "x$am_cv_prog_ln" = xln && result=yes
-{ $as_echo "$as_me:$LINENO: result: $result" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $result" >&5
$as_echo "$result" >&6; }
# The amount we should wait after modifying files depends on the platform.
@@ -2540,9 +2432,9 @@ esac
# Test for things needed by the test suite.
-{ $as_echo "$as_me:$LINENO: checking for grep that handles long lines and -e"
>&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long
lines and -e" >&5
$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
-if test "${ac_cv_path_GREP+set}" = set; then
+if test "${ac_cv_path_GREP+set}" = set; then :
$as_echo_n "(cached) " >&6
else
if test -z "$GREP"; then
@@ -2553,7 +2445,7 @@ for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_prog in grep ggrep; do
+ for ac_prog in grep ggrep; do
for ac_exec_ext in '' $ac_executable_extensions; do
ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
{ test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
@@ -2573,7 +2465,7 @@ case `"$ac_path_GREP" --version 2>&1` in
$as_echo 'GREP' >> "conftest.nl"
"$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl"
>"conftest.out" 2>/dev/null || break
diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- ac_count=`expr $ac_count + 1`
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
if test $ac_count -gt ${ac_path_GREP_max-0}; then
# Best one so far, save it but keep looking for a better one
ac_cv_path_GREP="$ac_path_GREP"
@@ -2588,26 +2480,24 @@ esac
$ac_path_GREP_found && break 3
done
done
-done
+ done
IFS=$as_save_IFS
if test -z "$ac_cv_path_GREP"; then
- { { $as_echo "$as_me:$LINENO: error: no acceptable grep could be found in
$PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-$as_echo "$as_me: error: no acceptable grep could be found in
$PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "no acceptable grep could be found in
$PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
fi
else
ac_cv_path_GREP=$GREP
fi
fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
$as_echo "$ac_cv_path_GREP" >&6; }
GREP="$ac_cv_path_GREP"
-{ $as_echo "$as_me:$LINENO: checking for egrep" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
$as_echo_n "checking for egrep... " >&6; }
-if test "${ac_cv_path_EGREP+set}" = set; then
+if test "${ac_cv_path_EGREP+set}" = set; then :
$as_echo_n "(cached) " >&6
else
if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
@@ -2621,7 +2511,7 @@ for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_prog in egrep; do
+ for ac_prog in egrep; do
for ac_exec_ext in '' $ac_executable_extensions; do
ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
{ test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
@@ -2641,7 +2531,7 @@ case `"$ac_path_EGREP" --version 2>&1` in
$as_echo 'EGREP' >> "conftest.nl"
"$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null ||
break
diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- ac_count=`expr $ac_count + 1`
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
if test $ac_count -gt ${ac_path_EGREP_max-0}; then
# Best one so far, save it but keep looking for a better one
ac_cv_path_EGREP="$ac_path_EGREP"
@@ -2656,12 +2546,10 @@ esac
$ac_path_EGREP_found && break 3
done
done
-done
+ done
IFS=$as_save_IFS
if test -z "$ac_cv_path_EGREP"; then
- { { $as_echo "$as_me:$LINENO: error: no acceptable egrep could be found in
$PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-$as_echo "$as_me: error: no acceptable egrep could be found in
$PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "no acceptable egrep could be found in
$PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
fi
else
ac_cv_path_EGREP=$EGREP
@@ -2669,14 +2557,14 @@ fi
fi
fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
$as_echo "$ac_cv_path_EGREP" >&6; }
EGREP="$ac_cv_path_EGREP"
-{ $as_echo "$as_me:$LINENO: checking for fgrep" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
$as_echo_n "checking for fgrep... " >&6; }
-if test "${ac_cv_path_FGREP+set}" = set; then
+if test "${ac_cv_path_FGREP+set}" = set; then :
$as_echo_n "(cached) " >&6
else
if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
@@ -2690,7 +2578,7 @@ for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_prog in fgrep; do
+ for ac_prog in fgrep; do
for ac_exec_ext in '' $ac_executable_extensions; do
ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
{ test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
@@ -2710,7 +2598,7 @@ case `"$ac_path_FGREP" --version 2>&1` in
$as_echo 'FGREP' >> "conftest.nl"
"$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- ac_count=`expr $ac_count + 1`
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
if test $ac_count -gt ${ac_path_FGREP_max-0}; then
# Best one so far, save it but keep looking for a better one
ac_cv_path_FGREP="$ac_path_FGREP"
@@ -2725,12 +2613,10 @@ esac
$ac_path_FGREP_found && break 3
done
done
-done
+ done
IFS=$as_save_IFS
if test -z "$ac_cv_path_FGREP"; then
- { { $as_echo "$as_me:$LINENO: error: no acceptable fgrep could be found in
$PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-$as_echo "$as_me: error: no acceptable fgrep could be found in
$PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "no acceptable fgrep could be found in
$PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
fi
else
ac_cv_path_FGREP=$FGREP
@@ -2738,7 +2624,7 @@ fi
fi
fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_FGREP" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
$as_echo "$ac_cv_path_FGREP" >&6; }
FGREP="$ac_cv_path_FGREP"
@@ -2778,13 +2664,13 @@ _ACEOF
case $ac_val in #(
*${as_nl}*)
case $ac_var in #(
- *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var
contains a newline" >&5
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable
$ac_var contains a newline" >&5
$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
esac
case $ac_var in #(
_ | IFS | as_nl) ;; #(
BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
- *) $as_unset $ac_var ;;
+ *) { eval $ac_var=; unset $ac_var;} ;;
esac ;;
esac
done
@@ -2792,8 +2678,8 @@ $as_echo "$as_me: WARNING: cache variable $ac_var
contains a newline" >&2;} ;;
(set) 2>&1 |
case $as_nl`(ac_space=' '; set) 2>&1` in #(
*${as_nl}ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote
- # substitution turns \\\\ into \\, and sed turns \\ into \).
+ # `set' does not quote correctly, so add quotes: double-quote
+ # substitution turns \\\\ into \\, and sed turns \\ into \.
sed -n \
"s/'/'\\\\''/g;
s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
@@ -2816,11 +2702,11 @@ $as_echo "$as_me: WARNING: cache variable $ac_var
contains a newline" >&2;} ;;
if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
if test -w "$cache_file"; then
test "x$cache_file" != "x/dev/null" &&
- { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
$as_echo "$as_me: updating cache $cache_file" >&6;}
cat confcache >$cache_file
else
- { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache
$cache_file" >&5
$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
fi
fi
@@ -2876,8 +2762,8 @@ for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
# 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
# will be set to the directory where LIBOBJS objects are built.
- ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
- ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
+ as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+ as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
done
LIBOBJS=$ac_libobjs
@@ -2889,9 +2775,10 @@ LTLIBOBJS=$ac_ltlibobjs
ac_write_fail=0
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
-cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
#! $SHELL
# Generated by $as_me.
# Run this file to recreate the current configuration.
@@ -2901,17 +2788,18 @@ cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
debug=false
ac_cs_recheck=false
ac_cs_silent=false
-SHELL=\${CONFIG_SHELL-$SHELL}
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-## --------------------- ##
-## M4sh Initialization. ##
-## --------------------- ##
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
# Be more Bourne compatible
DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
emulate sh
NULLCMD=:
# Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
@@ -2919,23 +2807,15 @@ if test -n "${ZSH_VERSION+set}" && (emulate sh)
>/dev/null 2>&1; then
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
else
- case `(set -o) 2>/dev/null` in
- *posix*) set -o posix ;;
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
esac
-
fi
-
-
-# PATH needs CR
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
as_nl='
'
export as_nl
@@ -2943,7 +2823,13 @@ export as_nl
as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
as_echo='printf %s\n'
as_echo_n='printf %s'
else
@@ -2954,7 +2840,7 @@ else
as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
as_echo_n_body='eval
arg=$1;
- case $arg in
+ case $arg in #(
*"$as_nl"*)
expr "X$arg" : "X\\(.*\\)$as_nl";
arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
@@ -2977,13 +2863,6 @@ if test "${PATH_SEPARATOR+set}" != set; then
}
fi
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
- as_unset=unset
-else
- as_unset=false
-fi
-
# IFS
# We need space, tab and new line, in precisely that order. Quoting is
@@ -2993,15 +2872,15 @@ fi
IFS=" "" $as_nl"
# Find who we are. Look in the path if we contain no directory separator.
-case $0 in
+case $0 in #((
*[\\/]* ) as_myself=$0 ;;
*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
IFS=$as_save_IFS
;;
@@ -3013,12 +2892,16 @@ if test "x$as_myself" = x; then
fi
if test ! -f "$as_myself"; then
$as_echo "$as_myself: error: cannot find myself; rerun with an absolute file
name" >&2
- { (exit 1); exit 1; }
+ exit 1
fi
-# Work around bugs in pre-3.0 UWIN ksh.
-for as_var in ENV MAIL MAILPATH
-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
done
PS1='$ '
PS2='> '
@@ -3030,7 +2913,89 @@ export LC_ALL
LANGUAGE=C
export LANGUAGE
-# Required to use basename.
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error ERROR [LINENO LOG_FD]
+# ---------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with status $?, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$?; test $as_status -eq 0 && as_status=1
+ if test "$3"; then
+ as_lineno=${as_lineno-"$2"}
as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+ fi
+ $as_echo "$as_me: error: $1" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
if expr a : '\(a\)' >/dev/null 2>&1 &&
test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
@@ -3044,8 +3009,12 @@ else
as_basename=false
fi
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
-# Name of the executable.
as_me=`$as_basename -- "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
X"$0" : 'X\(//\)$' \| \
@@ -3065,76 +3034,25 @@ $as_echo X/"$0" |
}
s/.*/./; q'`
-# CDPATH.
-$as_unset CDPATH
-
-
-
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-
- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
- # uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line after each line using $LINENO; the second 'sed'
- # does the real work. The second script uses 'N' to pair each
- # line-number line with the line containing $LINENO, and appends
- # trailing '-' during substitution so that $LINENO is not a special
- # case at line end.
- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # scripts with optimization help from Paolo Bonzini. Blame Lee
- # E. McMahon (1931-1989) for sed's syntax. :-)
- sed -n '
- p
- /[$]LINENO/=
- ' <$as_myself |
- sed '
- s/[$]LINENO.*/&-/
- t lineno
- b
- :lineno
- N
- :loop
- s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
- t loop
- s/-\n.*//
- ' >$as_me.lineno &&
- chmod +x "$as_me.lineno" ||
- { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX
shell" >&2
- { (exit 1); exit 1; }; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensitive to this).
- . "./$as_me.lineno"
- # Exit status is that of the last command.
- exit
-}
-
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in
+case `echo -n x` in #(((((
-n*)
- case `echo 'x\c'` in
+ case `echo 'xy\c'` in
*c*) ECHO_T=' ';; # ECHO_T is single tab character.
- *) ECHO_C='\c';;
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
esac;;
*)
ECHO_N='-n';;
esac
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
rm -f conf$$ conf$$.exe conf$$.file
if test -d conf$$.dir; then
@@ -3163,8 +3081,56 @@ fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
if mkdir -p . 2>/dev/null; then
- as_mkdir_p=:
+ as_mkdir_p='mkdir -p "$as_dir"'
else
test -d ./-p && rmdir ./-p
as_mkdir_p=false
@@ -3183,10 +3149,10 @@ else
if test -d "$1"; then
test -d "$1/.";
else
- case $1 in
+ case $1 in #(
-*)set "./$1";;
esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
???[sx]*):;;*)false;;esac;fi
'\'' sh
'
@@ -3201,13 +3167,19 @@ as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
-# Save the log message, to keep $[0] and so on meaningful, and to
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
-This file was extended by GNU Automake $as_me 1.10.2a, which was
-generated by GNU Autoconf 2.63. Invocation command line was
+This file was extended by GNU Automake $as_me 1.10.3a, which was
+generated by GNU Autoconf 2.65. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
CONFIG_HEADERS = $CONFIG_HEADERS
@@ -3234,13 +3206,15 @@ _ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
ac_cs_usage="\
-\`$as_me' instantiates files from templates according to the
-current configuration.
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration. Unless the files
+and actions are specified as TAGs, all are instantiated by default.
-Usage: $0 [OPTION]... [FILE]...
+Usage: $0 [OPTION]... [TAG]...
-h, --help print this help, then exit
-V, --version print version number and configuration settings, then exit
+ --config print configuration, then exit
-q, --quiet, --silent
do not print progress messages
-d, --debug don't remove temporary files
@@ -3251,16 +3225,19 @@ Usage: $0 [OPTION]... [FILE]...
Configuration files:
$config_files
-Report bugs to <address@hidden>."
+Report bugs to <address@hidden>.
+GNU Automake home page: <http://www.gnu.org/software/automake/>.
+General help using GNU software: <http://www.gnu.org/gethelp/>."
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //;
s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
-GNU Automake config.status 1.10.2a
-configured by $0, generated by GNU Autoconf 2.63,
- with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //;
s/[\\""\`\$]/\\\\&/g'`\\"
+GNU Automake config.status 1.10.3a
+configured by $0, generated by GNU Autoconf 2.65,
+ with options \\"\$ac_cs_config\\"
-Copyright (C) 2008 Free Software Foundation, Inc.
+Copyright (C) 2009 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."
@@ -3296,6 +3273,8 @@ do
ac_cs_recheck=: ;;
--version | --versio | --versi | --vers | --ver | --ve | --v | -V )
$as_echo "$ac_cs_version"; exit ;;
+ --config | --confi | --conf | --con | --co | --c )
+ $as_echo "$ac_cs_config"; exit ;;
--debug | --debu | --deb | --de | --d | -d )
debug=: ;;
--file | --fil | --fi | --f )
@@ -3303,7 +3282,7 @@ do
case $ac_optarg in
*\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
- CONFIG_FILES="$CONFIG_FILES '$ac_optarg'"
+ as_fn_append CONFIG_FILES " '$ac_optarg'"
ac_need_defaults=false;;
--he | --h | --help | --hel | -h )
$as_echo "$ac_cs_usage"; exit ;;
@@ -3312,11 +3291,10 @@ do
ac_cs_silent=: ;;
# This is an error.
- -*) { $as_echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2
- { (exit 1); exit 1; }; } ;;
+ -*) as_fn_error "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
- *) ac_config_targets="$ac_config_targets $1"
+ *) as_fn_append ac_config_targets " $1"
ac_need_defaults=false ;;
esac
@@ -3379,9 +3357,7 @@ do
"tests/aclocal-${APIVERSION}") CONFIG_FILES="$CONFIG_FILES
tests/aclocal-${APIVERSION}:tests/aclocal.in" ;;
"tests/automake-${APIVERSION}") CONFIG_FILES="$CONFIG_FILES
tests/automake-${APIVERSION}:tests/automake.in" ;;
- *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target"
>&5
-$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
- { (exit 1); exit 1; }; };;
+ *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
esac
done
@@ -3406,7 +3382,7 @@ $debug ||
trap 'exit_status=$?
{ test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
' 0
- trap '{ (exit 1); exit 1; }' 1 2 13 15
+ trap 'as_fn_exit 1' 1 2 13 15
}
# Create a (secure) tmp directory for tmp files.
@@ -3417,11 +3393,7 @@ $debug ||
{
tmp=./conf$$-$RANDOM
(umask 077 && mkdir "$tmp")
-} ||
-{
- $as_echo "$as_me: cannot create a temporary directory in ." >&2
- { (exit 1); exit 1; }
-}
+} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5
# Set up the scripts for CONFIG_FILES section.
# No need to generate them if there are no CONFIG_FILES.
@@ -3429,10 +3401,16 @@ $debug ||
if test -n "$CONFIG_FILES"; then
-ac_cr='
'
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+ eval ac_cr=\$\'\\r\'
+fi
ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
- ac_cs_awk_cr='\\r'
+ ac_cs_awk_cr='\r'
else
ac_cs_awk_cr=$ac_cr
fi
@@ -3446,24 +3424,18 @@ _ACEOF
echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
echo "_ACEOF"
} >conf$$subs.sh ||
- { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
ac_delim='%!_!# '
for ac_last_try in false false false false false :; do
. ./conf$$subs.sh ||
- { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
if test $ac_delim_n = $ac_delim_num; then
break
elif $ac_last_try; then
- { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
else
ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
fi
@@ -3485,7 +3457,7 @@ s/'"$ac_delim"'$//
t delim
:nl
h
-s/\(.\{148\}\).*/\1/
+s/\(.\{148\}\)..*/\1/
t more1
s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
p
@@ -3499,7 +3471,7 @@ s/.\{148\}//
t nl
:delim
h
-s/\(.\{148\}\).*/\1/
+s/\(.\{148\}\)..*/\1/
t more2
s/["\\]/\\&/g; s/^/"/; s/$/"/
p
@@ -3552,9 +3524,7 @@ if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
else
cat
fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
- || { { $as_echo "$as_me:$LINENO: error: could not setup config files
machinery" >&5
-$as_echo "$as_me: error: could not setup config files machinery" >&2;}
- { (exit 1); exit 1; }; }
+ || as_fn_error "could not setup config files machinery" "$LINENO" 5
_ACEOF
# VPATH may cause trouble with some makes, so we remove $(srcdir),
@@ -3585,9 +3555,7 @@ do
esac
case $ac_mode$ac_tag in
:[FHL]*:*);;
- :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5
-$as_echo "$as_me: error: invalid tag $ac_tag" >&2;}
- { (exit 1); exit 1; }; };;
+ :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;;
:[FH]-) ac_tag=-:-;;
:[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
esac
@@ -3615,12 +3583,10 @@ $as_echo "$as_me: error: invalid tag $ac_tag" >&2;}
[\\/$]*) false;;
*) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
esac ||
- { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f"
>&5
-$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;}
- { (exit 1); exit 1; }; };;
+ as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;;
esac
case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;;
esac
- ac_file_inputs="$ac_file_inputs '$ac_f'"
+ as_fn_append ac_file_inputs " '$ac_f'"
done
# Let's still pretend it is `configure' which instantiates (i.e., don't
@@ -3631,7 +3597,7 @@ $as_echo "$as_me: error: cannot find input file: $ac_f"
>&2;}
`' by configure.'
if test x"$ac_file" != x-; then
configure_input="$ac_file. $configure_input"
- { $as_echo "$as_me:$LINENO: creating $ac_file" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
$as_echo "$as_me: creating $ac_file" >&6;}
fi
# Neutralize special characters interpreted by sed in replacement strings.
@@ -3644,9 +3610,7 @@ $as_echo "$as_me: creating $ac_file" >&6;}
case $ac_tag in
*:-:* | *:-) cat >"$tmp/stdin" \
- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
-$as_echo "$as_me: error: could not create $ac_file" >&2;}
- { (exit 1); exit 1; }; } ;;
+ || as_fn_error "could not create $ac_file" "$LINENO" 5 ;;
esac
;;
esac
@@ -3674,47 +3638,7 @@ $as_echo X"$ac_file" |
q
}
s/.*/./; q'`
- { as_dir="$ac_dir"
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
- as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create
directory $as_dir" >&5
-$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
- { (exit 1); exit 1; }; }; }
+ as_dir="$ac_dir"; as_fn_mkdir_p
ac_builddir=.
case "$ac_dir" in
@@ -3771,7 +3695,6 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
# If the template does not know about datarootdir, expand it.
# FIXME: This hack should be removed a few years after 2.60.
ac_datarootdir_hack=; ac_datarootdir_seen=
-
ac_sed_dataroot='
/datarootdir/ {
p
@@ -3781,12 +3704,11 @@ ac_sed_dataroot='
/@docdir@/p
/@infodir@/p
/@localedir@/p
-/@mandir@/p
-'
+/@mandir@/p'
case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
*datarootdir*) ac_datarootdir_seen=yes;;
address@hidden@*|address@hidden@*|address@hidden@*|address@hidden@*|address@hidden@*)
- { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the
--datarootdir setting" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to
ignore the --datarootdir setting" >&5
$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir
setting" >&2;}
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
@@ -3796,7 +3718,7 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
s&@infodir@&$infodir&g
s&@localedir@&$localedir&g
s&@mandir@&$mandir&g
- s&\\\${datarootdir}&$datarootdir&g' ;;
+ s&\\\${datarootdir}&$datarootdir&g' ;;
esac
_ACEOF
@@ -3825,14 +3747,12 @@ s&@MKDIR_P@&$ac_MKDIR_P&;t t
$ac_datarootdir_hack
"
eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk"
>$tmp/out \
- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
-$as_echo "$as_me: error: could not create $ac_file" >&2;}
- { (exit 1); exit 1; }; }
+ || as_fn_error "could not create $ac_file" "$LINENO" 5
test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
{ ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
{ ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z
"$ac_out"; } &&
- { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the
variable \`datarootdir'
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a
reference to the variable \`datarootdir'
which seems to be undefined. Please make sure it is defined." >&5
$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable
\`datarootdir'
which seems to be undefined. Please make sure it is defined." >&2;}
@@ -3842,9 +3762,7 @@ which seems to be undefined. Please make sure it is
defined." >&2;}
-) cat "$tmp/out" && rm -f "$tmp/out";;
*) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
esac \
- || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
-$as_echo "$as_me: error: could not create $ac_file" >&2;}
- { (exit 1); exit 1; }; }
+ || as_fn_error "could not create $ac_file" "$LINENO" 5
;;
@@ -3860,15 +3778,12 @@ $as_echo "$as_me: error: could not create $ac_file"
>&2;}
done # for ac_tag
-{ (exit 0); exit 0; }
+as_fn_exit 0
_ACEOF
-chmod +x $CONFIG_STATUS
ac_clean_files=$ac_clean_files_save
test $ac_write_fail = 0 ||
- { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS"
>&5
-$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;}
- { (exit 1); exit 1; }; }
+ as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5
# configure is writing to config.log, and then calls config.status.
@@ -3889,10 +3804,10 @@ if test "$no_create" != yes; then
exec 5>>config.log
# Use ||, not &&, to avoid exiting from the if with $? = 1, which
# would make configure fail if this is the last instruction.
- $ac_cs_success || { (exit 1); exit 1; }
+ $ac_cs_success || as_fn_exit $?
fi
if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no;
then
- { $as_echo "$as_me:$LINENO: WARNING: unrecognized options:
$ac_unrecognized_opts" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options:
$ac_unrecognized_opts" >&5
$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
fi
diff --git a/configure.ac b/configure.ac
index 920b357..60a6736 100644
--- a/configure.ac
+++ b/configure.ac
@@ -1,7 +1,7 @@
# Process this file with autoconf to produce a configure script.
# Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2006,
-# 2004, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2004, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -20,7 +20,7 @@
dnl Require Autoconf 2.60 for AC_REQUIRE_AUX_FILE.
AC_PREREQ(2.60)
-AC_INIT([GNU Automake], [1.10.2a], address@hidden)
+AC_INIT([GNU Automake], [1.10.3a], address@hidden)
AC_CONFIG_SRCDIR(automake.in)
AC_CONFIG_AUX_DIR(lib)
diff --git a/doc/Makefile.in b/doc/Makefile.in
index 8933e20..114d5db 100644
--- a/doc/Makefile.in
+++ b/doc/Makefile.in
@@ -1,4 +1,4 @@
-# Makefile.in generated by automake 1.10.2a from Makefile.am.
+# Makefile.in generated by automake 1.10.3a from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@@ -109,6 +109,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
diff --git a/doc/automake.texi b/doc/automake.texi
index b3ef1b8..81ba6cb 100644
--- a/doc/automake.texi
+++ b/doc/automake.texi
@@ -4171,7 +4171,7 @@ variables it cannot ensure the corresponding directory
exists.
@section An Alternative Approach to Subdirectories
If you've ever read Peter Miller's excellent paper,
address@hidden://www.pcug.org.au/~millerp/rmch/recu-make-cons-harm.html,
address@hidden://miller.emu.id.au/pmiller/books/rmch/,
Recursive Make Considered Harmful}, the preceding sections on the use of
subdirectories will probably come as unwelcome advice. For those who
haven't read the paper, Miller's main thesis is that recursive
@@ -5423,14 +5423,20 @@ You can override the linker on a per-program basis. By
default the
linker is chosen according to the languages used by the program. For
instance, a program that includes C++ source code would use the C++
compiler to link. The @code{_LINK} variable must hold the name of a
-command that can be passed all the @file{.o} file names as arguments.
-Note that the name of the underlying program is @emph{not} passed to
address@hidden; typically one uses @samp{$@@}:
+command that can be passed all the @file{.o} file names and libraries
+to link against as arguments. Note that the name of the underlying
+program is @emph{not} passed to @code{_LINK}; typically one uses
address@hidden@@}:
@example
maude_LINK = $(CCLD) -magic -o $@@
@end example
+If a @code{_LINK} variable is not supplied, it may still be generated
+and used by Automake due to the use of per-target link flags such as
address@hidden, @code{_LDFLAGS} or @code{_LIBTOOLFLAGS}, in cases where
+they apply.
+
@item maude_CCASFLAGS
@itemx maude_CFLAGS
@itemx maude_CPPFLAGS
@@ -5789,7 +5795,9 @@ preference to the per-executable (or per-library)
@code{_LDFLAGS}.
This is the command used to actually link a C program. It already
includes @samp{-o $@@} and the usual variable references (for instance,
@code{CFLAGS}); it takes as ``arguments'' the names of the object files
-and libraries to link in.
+and libraries to link in. This variable is not used when the linker is
+overridden with a per-target @code{_LINK} variable or per-target flags
+cause Automake to define such a @code{_LINK} variable.
@end vtable
@@ -6304,6 +6312,10 @@ library written in another language and would like to
set the linker
more appropriately. @xref{Libtool Convenience Libraries}, for a
trick with @address@hidden
+A per-target @code{_LINK} variable will override the above selection.
+Per-target link flags will cause Automake to write a per-target
address@hidden variable according to the language chosen as above.
+
@node Fortran 9x Support
@comment node-name, next, previous, up
@@ -8523,7 +8535,7 @@ run-time dependencies are satisfied after installation.
@vindex AM_INSTALLCHECK_STD_OPTIONS_EXEMPT
In a few situations, programs (or scripts) have to be exempted from this
-test. For instance, @command{false} (from GNU sh-utils) is never
+test. For instance, @command{false} (from GNU coreutils) is never
successful, even for @option{--help} or @option{--version}. You can list
such programs in the variable @code{AM_INSTALLCHECK_STD_OPTIONS_EXEMPT}.
Programs (not scripts) listed in this variable should be suffixed by
@@ -12005,6 +12017,7 @@ parentheses is the number of generated test cases.
@item 2006-10-15 @tab 1.10 @tab 7859 @tab 1072 @tab 8024 @tab 3512 (40) @tab
1496 (34) @tab 172 @tab 604
@item 2008-01-19 @tab 1.10.1 @tab 7870 @tab 1089 @tab 8025 @tab 3520 (40) @tab
1499 (34) @tab 173 @tab 617
@item 2008-11-23 @tab 1.10.2 @tab 7882 @tab 1089 @tab 8027 @tab 3540 (40) @tab
1509 (34) @tab 176 @tab 628
address@hidden 2009-12-07 @tab 1.10.3 @tab 7892 @tab 1089 @tab 8027 @tab 3566
(40) @tab 1535 (34) @tab 174 @tab 636
@end multitable
diff --git a/lib/Automake/Makefile.in b/lib/Automake/Makefile.in
index 5084228..2e3e4f4 100644
--- a/lib/Automake/Makefile.in
+++ b/lib/Automake/Makefile.in
@@ -1,4 +1,4 @@
-# Makefile.in generated by automake 1.10.2a from Makefile.am.
+# Makefile.in generated by automake 1.10.3a from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@@ -105,6 +105,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
@@ -269,7 +270,7 @@ uninstall-nodist_perllibDATA:
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
- @failcom='exit 1'; \
+ @fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
@@ -294,7 +295,7 @@ $(RECURSIVE_TARGETS):
fi; test -z "$$fail"
$(RECURSIVE_CLEAN_TARGETS):
- @failcom='exit 1'; \
+ @fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
diff --git a/lib/Automake/Wrap.pm b/lib/Automake/Wrap.pm
index a6bf518..99b6654 100644
--- a/lib/Automake/Wrap.pm
+++ b/lib/Automake/Wrap.pm
@@ -57,7 +57,7 @@ sub tab_length($)
{
my ($txt) = @_;
my $len = length ($txt);
- $len += 7 * ($txt =~ tr/\t/\t/d);
+ $len += 7 * ($txt =~ tr/\t/\t/);
return $len;
}
diff --git a/lib/Automake/tests/Makefile.in b/lib/Automake/tests/Makefile.in
index dcc08f4..f2cad5e 100644
--- a/lib/Automake/tests/Makefile.in
+++ b/lib/Automake/tests/Makefile.in
@@ -1,4 +1,4 @@
-# Makefile.in generated by automake 1.10.2a from Makefile.am.
+# Makefile.in generated by automake 1.10.3a from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@@ -81,6 +81,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
diff --git a/lib/INSTALL b/lib/INSTALL
index 2550dab..7d1c323 100644
--- a/lib/INSTALL
+++ b/lib/INSTALL
@@ -4,8 +4,10 @@ Installation Instructions
Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
2006, 2007, 2008, 2009 Free Software Foundation, Inc.
- This file is free documentation; the Free Software Foundation gives
-unlimited permission to copy, distribute and modify it.
+ Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved. This file is offered as-is,
+without warranty of any kind.
Basic Installation
==================
@@ -13,7 +15,11 @@ Basic Installation
Briefly, the shell commands `./configure; make; make install' should
configure, build, and install this package. The following
more-detailed instructions are generic; see the `README' file for
-instructions specific to this package.
+instructions specific to this package. Some packages provide this
+`INSTALL' file but do not implement all of the features documented
+below. The lack of an optional feature in a given package is not
+necessarily a bug. More recommendations for GNU packages can be found
+in *note Makefile Conventions: (standards)Makefile Conventions.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
@@ -42,7 +48,7 @@ may remove or edit it.
you want to change it or regenerate `configure' using a newer version
of `autoconf'.
-The simplest way to compile this package is:
+ The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
`./configure' to configure the package for your system.
@@ -53,12 +59,22 @@ The simplest way to compile this package is:
2. Type `make' to compile the package.
3. Optionally, type `make check' to run any self-tests that come with
- the package.
+ the package, generally using the just-built uninstalled binaries.
4. Type `make install' to install the programs and any data files and
- documentation.
-
- 5. You can remove the program binaries and object files from the
+ documentation. When installing into a prefix owned by root, it is
+ recommended that the package be configured and built as a regular
+ user, and only the `make install' phase executed with root
+ privileges.
+
+ 5. Optionally, type `make installcheck' to repeat any self-tests, but
+ this time using the binaries in their final installed location.
+ This target does not install anything. Running this target as a
+ regular user, particularly if the prior `make install' required
+ root privileges, verifies that the installation completed
+ correctly.
+
+ 6. You can remove the program binaries and object files from the
source code directory by typing `make clean'. To also remove the
files that `configure' created (so you can compile the package for
a different kind of computer), type `make distclean'. There is
@@ -67,8 +83,15 @@ The simplest way to compile this package is:
all sorts of other programs in order to regenerate files that came
with the distribution.
- 6. Often, you can also type `make uninstall' to remove the installed
- files again.
+ 7. Often, you can also type `make uninstall' to remove the installed
+ files again. In practice, not all packages have tested that
+ uninstallation works correctly, even though it is required by the
+ GNU Coding Standards.
+
+ 8. Some packages, particularly those that use Automake, provide `make
+ distcheck', which can by used by developers to test that all other
+ targets like `make install' and `make uninstall' work correctly.
+ This target is generally not run by end users.
Compilers and Options
=====================
@@ -93,7 +116,8 @@ same time, by placing the object files for each architecture
in their
own directory. To do this, you can use GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
+source code in the directory that `configure' is in and in `..'. This
+is known as a "VPATH" build.
With a non-GNU `make', it is safer to compile the package for one
architecture at a time in the source code directory. After you have
@@ -120,7 +144,8 @@ Installation Names
By default, `make install' installs the package's commands under
`/usr/local/bin', include files under `/usr/local/include', etc. You
can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX'.
+`configure' the option `--prefix=PREFIX', where PREFIX must be an
+absolute file name.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
@@ -131,15 +156,46 @@ Documentation and other data files still use the regular
prefix.
In addition, if you use an unusual directory layout you can give
options like `--bindir=DIR' to specify different values for particular
kinds of files. Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
+you can set and what kinds of files go in them. In general, the
+default for these options is expressed in terms of `${prefix}', so that
+specifying just `--prefix' will affect all of the other directory
+specifications that were not explicitly provided.
+
+ The most portable way to affect installation locations is to pass the
+correct locations to `configure'; however, many packages provide one or
+both of the following shortcuts of passing variable assignments to the
+`make install' command line to change installation locations without
+having to reconfigure or recompile.
+
+ The first method involves providing an override variable for each
+affected directory. For example, `make install
+prefix=/alternate/directory' will choose an alternate location for all
+directory configuration variables that were expressed in terms of
+`${prefix}'. Any directories that were specified during `configure',
+but not in terms of `${prefix}', must each be overridden at install
+time for the entire installation to be relocated. The approach of
+makefile variable overrides for each directory variable is required by
+the GNU Coding Standards, and ideally causes no recompilation.
+However, some platforms have known limitations with the semantics of
+shared libraries that end up requiring recompilation when using this
+method, particularly noticeable in packages that use GNU Libtool.
+
+ The second method involves providing the `DESTDIR' variable. For
+example, `make install DESTDIR=/alternate/directory' will prepend
+`/alternate/directory' before all installation names. The approach of
+`DESTDIR' overrides is not required by the GNU Coding Standards, and
+does not work on platforms that have drive letters. On the other hand,
+it does better at avoiding recompilation issues, and works well even
+when some directory options were not specified in terms of `${prefix}'
+at `configure' time.
+
+Optional Features
+=================
If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-Optional Features
-=================
-
Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
@@ -152,6 +208,13 @@ find the X include and library files automatically, but if
it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.
+ Some packages offer the ability to configure how verbose the
+execution of `make' will be. For these packages, running `./configure
+--enable-silent-rules' sets the default to minimal output, which can be
+overridden with `make V=1'; while running `./configure
+--disable-silent-rules' sets the default to verbose, which can be
+overridden with `make V=0'.
+
Particular systems
==================
@@ -288,7 +351,7 @@ operates.
`configure' can determine that directory automatically.
`--prefix=DIR'
- Use DIR as the installation prefix. *Note Installation Names::
+ Use DIR as the installation prefix. *note Installation Names::
for more details, including other options available for fine-tuning
the installation locations.
diff --git a/lib/Makefile.in b/lib/Makefile.in
index bfc798a..a99155a 100644
--- a/lib/Makefile.in
+++ b/lib/Makefile.in
@@ -1,4 +1,4 @@
-# Makefile.in generated by automake 1.10.2a from Makefile.am.
+# Makefile.in generated by automake 1.10.3a from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@@ -108,6 +108,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
@@ -245,7 +246,7 @@ uninstall-dist_scriptDATA:
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
- @failcom='exit 1'; \
+ @fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
@@ -270,7 +271,7 @@ $(RECURSIVE_TARGETS):
fi; test -z "$$fail"
$(RECURSIVE_CLEAN_TARGETS):
- @failcom='exit 1'; \
+ @fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
diff --git a/lib/am/Makefile.in b/lib/am/Makefile.in
index 4810659..3b10b96 100644
--- a/lib/am/Makefile.in
+++ b/lib/am/Makefile.in
@@ -1,4 +1,4 @@
-# Makefile.in generated by automake 1.10.2a from Makefile.am.
+# Makefile.in generated by automake 1.10.3a from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@@ -92,6 +92,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
diff --git a/lib/am/distdir.am b/lib/am/distdir.am
index 372dc6d..6c26665 100644
--- a/lib/am/distdir.am
+++ b/lib/am/distdir.am
@@ -222,11 +222,7 @@ if %?DIST-TARGETS%
endif %?DIST-TARGETS%
##
## This complex find command will try to avoid changing the modes of
-## links into the source tree, in case they're hard-linked. It will
-## also make directories writable by everybody, because some
-## brain-dead tar implementations change ownership and permissions of
-## a directory before extracting the files, thus becoming unable to
-## extract them.
+## links into the source tree, in case they're hard-linked.
##
## Ignore return result from chmod, because it might give an error
## if we chmod a symlink.
@@ -239,7 +235,8 @@ endif %?DIST-TARGETS%
## the file in place in the source tree.
##
if %?TOPDIR_P%
- -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+ -find "$(distdir)" -type d ! -perm -755 \
+ -exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
diff --git a/lib/am/subdirs.am b/lib/am/subdirs.am
index 322debb..31a1db6 100644
--- a/lib/am/subdirs.am
+++ b/lib/am/subdirs.am
@@ -34,7 +34,7 @@ RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive
clean-recursive \
$(RECURSIVE_TARGETS):
## Using $failcom allows "-k" to keep its natural meaning when running a
## recursive rule.
- @failcom='exit 1'; \
+ @fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
@@ -73,7 +73,7 @@ maintainer-clean: maintainer-clean-recursive
$(RECURSIVE_CLEAN_TARGETS):
## Using $failcom allows "-k" to keep its natural meaning when running a
## recursive rule.
- @failcom='exit 1'; \
+ @fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
diff --git a/lib/compile b/lib/compile
index 0825b48..5360806 100755
--- a/lib/compile
+++ b/lib/compile
@@ -1,7 +1,7 @@
#! /bin/sh
# Wrapper for compilers which do not understand `-c -o'.
-scriptversion=2009-04-28.21; # UTC
+scriptversion=2009-10-06.20; # UTC
# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2009 Free Software
# Foundation, Inc.
@@ -125,9 +125,9 @@ trap "rmdir '$lockdir'; exit 1" 1 2 15
ret=$?
if test -f "$cofile"; then
- mv "$cofile" "$ofile"
+ test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
elif test -f "${cofile}bj"; then
- mv "${cofile}bj" "$ofile"
+ test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
fi
rmdir "$lockdir"
diff --git a/lib/config.guess b/lib/config.guess
index e5716ee..dc84c68 100755
--- a/lib/config.guess
+++ b/lib/config.guess
@@ -1,10 +1,10 @@
#! /bin/sh
# Attempt to guess a canonical system name.
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
+# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
# Free Software Foundation, Inc.
-timestamp='2009-02-03'
+timestamp='2009-11-20'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
@@ -27,16 +27,16 @@ timestamp='2009-02-03'
# the same distribution terms that you use for the rest of that program.
-# Originally written by Per Bothner <address@hidden>.
-# Please send patches to <address@hidden>. Submit a context
-# diff and a properly formatted ChangeLog entry.
+# Originally written by Per Bothner. Please send patches (context
+# diff format) to <address@hidden> and include a ChangeLog
+# entry.
#
# This script attempts to guess a canonical system name similar to
# config.sub. If it succeeds, it prints the system name on stdout, and
# exits with 0. Otherwise, it exits with 1.
#
-# The plan is that this can be called by configure scripts if you
-# don't specify an explicit build system type.
+# You can get the latest version of this script from:
+#
http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
me=`echo "$0" | sed -e 's,.*/,,'`
@@ -170,7 +170,7 @@ case
"${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
arm*|i386|m68k|ns32k|sh3*|sparc|vax)
eval $set_cc_for_build
if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
- | grep __ELF__ >/dev/null
+ | grep -q __ELF__
then
# Once all utilities can be ECOFF (netbsdecoff) or a.out
(netbsdaout).
# Return netbsd for either. FIX?
@@ -324,12 +324,18 @@ case
"${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
case `/usr/bin/uname -p` in
sparc) echo sparc-icl-nx7; exit ;;
esac ;;
+ s390x:SunOS:*:*)
+ echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e
's/[^.]*//'`
+ exit ;;
sun4H:SunOS:5.*:*)
echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
exit ;;
sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
exit ;;
+ i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
+ echo i386-pc-auroraux${UNAME_RELEASE}
+ exit ;;
i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
eval $set_cc_for_build
SUN_ARCH="i386"
@@ -653,7 +659,7 @@ EOF
# => hppa64-hp-hpux11.23
if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
- grep __LP64__ >/dev/null
+ grep -q __LP64__
then
HP_ARCH="hppa2.0w"
else
@@ -804,12 +810,12 @@ EOF
i*:PW*:*)
echo ${UNAME_MACHINE}-pc-pw32
exit ;;
- *:Interix*:[3456]*)
+ *:Interix*:*)
case ${UNAME_MACHINE} in
x86)
echo i586-pc-interix${UNAME_RELEASE}
exit ;;
- EM64T | authenticamd | genuineintel)
+ authenticamd | genuineintel | EM64T)
echo x86_64-unknown-interix${UNAME_RELEASE}
exit ;;
IA64)
@@ -819,6 +825,9 @@ EOF
[345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
echo i${UNAME_MACHINE}-pc-mks
exit ;;
+ 8664:Windows_NT:*)
+ echo x86_64-pc-mks
+ exit ;;
i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
# How do we know it's Interix rather than the generic POSIX subsystem?
# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
@@ -848,6 +857,20 @@ EOF
i*86:Minix:*:*)
echo ${UNAME_MACHINE}-pc-minix
exit ;;
+ alpha:Linux:*:*)
+ case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+ EV5) UNAME_MACHINE=alphaev5 ;;
+ EV56) UNAME_MACHINE=alphaev56 ;;
+ PCA56) UNAME_MACHINE=alphapca56 ;;
+ PCA57) UNAME_MACHINE=alphapca56 ;;
+ EV6) UNAME_MACHINE=alphaev6 ;;
+ EV67) UNAME_MACHINE=alphaev67 ;;
+ EV68*) UNAME_MACHINE=alphaev68 ;;
+ esac
+ objdump --private-headers /bin/sh | grep -q ld.so.1
+ if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
+ echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+ exit ;;
arm*:Linux:*:*)
eval $set_cc_for_build
if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
@@ -870,6 +893,17 @@ EOF
frv:Linux:*:*)
echo frv-unknown-linux-gnu
exit ;;
+ i*86:Linux:*:*)
+ LIBC=gnu
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #ifdef __dietlibc__
+ LIBC=dietlibc
+ #endif
+EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
+ echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
+ exit ;;
ia64:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-gnu
exit ;;
@@ -879,78 +913,34 @@ EOF
m68*:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-gnu
exit ;;
- mips:Linux:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #undef CPU
- #undef mips
- #undef mipsel
- #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) ||
defined(MIPSEL)
- CPU=mipsel
- #else
- #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) ||
defined(MIPSEB)
- CPU=mips
- #else
- CPU=
- #endif
- #endif
-EOF
- eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
- /^CPU/{
- s: ::g
- p
- }'`"
- test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
- ;;
- mips64:Linux:*:*)
+ mips:Linux:*:* | mips64:Linux:*:*)
eval $set_cc_for_build
sed 's/^ //' << EOF >$dummy.c
#undef CPU
- #undef mips64
- #undef mips64el
+ #undef ${UNAME_MACHINE}
+ #undef ${UNAME_MACHINE}el
#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) ||
defined(MIPSEL)
- CPU=mips64el
+ CPU=${UNAME_MACHINE}el
#else
#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) ||
defined(MIPSEB)
- CPU=mips64
+ CPU=${UNAME_MACHINE}
#else
CPU=
#endif
#endif
EOF
- eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
- /^CPU/{
- s: ::g
- p
- }'`"
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
;;
or32:Linux:*:*)
echo or32-unknown-linux-gnu
exit ;;
- ppc:Linux:*:*)
- echo powerpc-unknown-linux-gnu
- exit ;;
- ppc64:Linux:*:*)
- echo powerpc64-unknown-linux-gnu
- exit ;;
- alpha:Linux:*:*)
- case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
- EV5) UNAME_MACHINE=alphaev5 ;;
- EV56) UNAME_MACHINE=alphaev56 ;;
- PCA56) UNAME_MACHINE=alphapca56 ;;
- PCA57) UNAME_MACHINE=alphapca56 ;;
- EV6) UNAME_MACHINE=alphaev6 ;;
- EV67) UNAME_MACHINE=alphaev67 ;;
- EV68*) UNAME_MACHINE=alphaev68 ;;
- esac
- objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
- if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
- echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
- exit ;;
padre:Linux:*:*)
echo sparc-unknown-linux-gnu
exit ;;
+ parisc64:Linux:*:* | hppa64:Linux:*:*)
+ echo hppa64-unknown-linux-gnu
+ exit ;;
parisc:Linux:*:* | hppa:Linux:*:*)
# Look for CPU level
case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
@@ -959,8 +949,11 @@ EOF
*) echo hppa-unknown-linux-gnu ;;
esac
exit ;;
- parisc64:Linux:*:* | hppa64:Linux:*:*)
- echo hppa64-unknown-linux-gnu
+ ppc64:Linux:*:*)
+ echo powerpc64-unknown-linux-gnu
+ exit ;;
+ ppc:Linux:*:*)
+ echo powerpc-unknown-linux-gnu
exit ;;
s390:Linux:*:* | s390x:Linux:*:*)
echo ${UNAME_MACHINE}-ibm-linux
@@ -983,66 +976,6 @@ EOF
xtensa*:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-gnu
exit ;;
- i*86:Linux:*:*)
- # The BFD linker knows what the default object file format is, so
- # first see if it will tell us. cd to the root directory to prevent
- # problems with other programs or directories called `ld' in the path.
- # Set LC_ALL=C to ensure ld outputs messages in English.
- ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
- | sed -ne '/supported targets:/!d
- s/[ ][ ]*/ /g
- s/.*supported targets: *//
- s/ .*//
- p'`
- case "$ld_supported_targets" in
- elf32-i386)
- TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
- ;;
- a.out-i386-linux)
- echo "${UNAME_MACHINE}-pc-linux-gnuaout"
- exit ;;
- "")
- # Either a pre-BFD a.out linker (linux-gnuoldld) or
- # one that does not give us useful --help.
- echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
- exit ;;
- esac
- # Determine whether the default compiler is a.out or elf
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <features.h>
- #ifdef __ELF__
- # ifdef __GLIBC__
- # if __GLIBC__ >= 2
- LIBC=gnu
- # else
- LIBC=gnulibc1
- # endif
- # else
- LIBC=gnulibc1
- # endif
- #else
- #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C)
|| defined(__SUNPRO_CC)
- LIBC=gnu
- #else
- LIBC=gnuaout
- #endif
- #endif
- #ifdef __dietlibc__
- LIBC=dietlibc
- #endif
-EOF
- eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
- /^LIBC/{
- s: ::g
- p
- }'`"
- test x"${LIBC}" != x && {
- echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
- exit
- }
- test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; }
- ;;
i*86:DYNIX/ptx:4*:*)
# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
# earlier versions are messed up and put the nodename in both
@@ -1071,7 +1004,7 @@ EOF
i*86:syllable:*:*)
echo ${UNAME_MACHINE}-pc-syllable
exit ;;
- i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
+ i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
echo i386-unknown-lynxos${UNAME_RELEASE}
exit ;;
i*86:*DOS:*:*)
@@ -1115,8 +1048,11 @@ EOF
pc:*:*:*)
# Left here for compatibility:
# uname -m prints for DJGPP always 'pc', but it prints nothing about
- # the processor, so we play safe by assuming i386.
- echo i386-pc-msdosdjgpp
+ # the processor, so we play safe by assuming i586.
+ # Note: whatever this is, it MUST be the same as what config.sub
+ # prints for the "djgpp" host, or else GDB configury will decide that
+ # this is a cross-build.
+ echo i586-pc-msdosdjgpp
exit ;;
Intel:Mach:3*:*)
echo i386-pc-mach3
@@ -1176,7 +1112,7 @@ EOF
rs6000:LynxOS:2.*:*)
echo rs6000-unknown-lynxos${UNAME_RELEASE}
exit ;;
- PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
+ PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
echo powerpc-unknown-lynxos${UNAME_RELEASE}
exit ;;
SM[BE]S:UNIX_SV:*:*)
@@ -1269,6 +1205,16 @@ EOF
*:Darwin:*:*)
UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
case $UNAME_PROCESSOR in
+ i386)
+ eval $set_cc_for_build
+ if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+ if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo
'#endif') | \
+ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+ grep IS_64BIT_ARCH >/dev/null
+ then
+ UNAME_PROCESSOR="x86_64"
+ fi
+ fi ;;
unknown) UNAME_PROCESSOR=powerpc ;;
esac
echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
diff --git a/lib/config.sub b/lib/config.sub
index d546a94..2a55a50 100755
--- a/lib/config.sub
+++ b/lib/config.sub
@@ -1,10 +1,10 @@
#! /bin/sh
# Configuration validation subroutine script.
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
+# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
# Free Software Foundation, Inc.
-timestamp='2009-02-03'
+timestamp='2009-11-20'
# This file is (in principle) common to ALL GNU software.
# The presence of a machine in this file suggests that SOME GNU software
@@ -32,13 +32,16 @@ timestamp='2009-02-03'
# Please send patches to <address@hidden>. Submit a context
-# diff and a properly formatted ChangeLog entry.
+# diff and a properly formatted GNU ChangeLog entry.
#
# Configuration subroutine to validate and canonicalize a configuration type.
# Supply the specified configuration type as an argument.
# If it is invalid, we print an error message on stderr and exit with code 1.
# Otherwise, we print the canonical config type on stdout and succeed.
+# You can get the latest version of this script from:
+#
http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
# This file is supposed to be the same for all GNU packages
# and recognize all the CPU types, system types and aliases
# that are meaningful with *any* GNU software.
@@ -149,10 +152,13 @@ case $os in
-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
- -apple | -axis | -knuth | -cray)
+ -apple | -axis | -knuth | -cray | -microblaze)
os=
basic_machine=$1
;;
+ -bluegene*)
+ os=-cnk
+ ;;
-sim | -cisco | -oki | -wec | -winbond)
os=
basic_machine=$1
@@ -272,6 +278,7 @@ case $basic_machine in
| mipsisa64sr71k | mipsisa64sr71kel \
| mipstx39 | mipstx39el \
| mn10200 | mn10300 \
+ | moxie \
| mt \
| msp430 \
| nios | nios2 \
@@ -280,6 +287,7 @@ case $basic_machine in
| pdp10 | pdp11 | pj | pjl \
| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
| pyramid \
+ | rx \
| score \
| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb |
shbe | shle | sh[1234]le | sh3ele \
| sh64 | sh64le \
@@ -287,13 +295,14 @@ case $basic_machine in
| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
| spu | strongarm \
| tahoe | thumb | tic4x | tic80 | tron \
+ | ubicom32 \
| v850 | v850e \
| we32k \
| x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
| z8k | z80)
basic_machine=$basic_machine-unknown
;;
- m6811 | m68hc11 | m6812 | m68hc12)
+ m6811 | m68hc11 | m6812 | m68hc12 | picochip)
# Motorola 68HC11/12.
basic_machine=$basic_machine-unknown
os=-none
@@ -336,7 +345,7 @@ case $basic_machine in
| lm32-* \
| m32c-* | m32r-* | m32rle-* \
| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
- | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \
+ | m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \
| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
| mips16-* \
| mips64-* | mips64el-* \
@@ -364,7 +373,7 @@ case $basic_machine in
| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
| pyramid-* \
- | romp-* | rs6000-* \
+ | romp-* | rs6000-* | rx-* \
| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-*
| sheb-* | shbe-* \
| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* |
sparclet-* \
@@ -373,6 +382,7 @@ case $basic_machine in
| tahoe-* | thumb-* \
| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* | tile-* \
| tron-* \
+ | ubicom32-* \
| v850-* | v850e-* | vax-* \
| we32k-* \
| x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
@@ -466,6 +476,10 @@ case $basic_machine in
basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
os=-linux
;;
+ bluegene*)
+ basic_machine=powerpc-ibm
+ os=-cnk
+ ;;
c90)
basic_machine=c90-cray
os=-unicos
@@ -718,6 +732,9 @@ case $basic_machine in
basic_machine=ns32k-utek
os=-sysv
;;
+ microblaze)
+ basic_machine=microblaze-xilinx
+ ;;
mingw32)
basic_machine=i386-pc
os=-mingw32
@@ -1239,6 +1256,9 @@ case $os in
# First match some system type aliases
# that might get confused with valid system types.
# -solaris* is a basic system type, with this one exception.
+ -auroraux)
+ os=-auroraux
+ ;;
-solaris1 | -solaris1.*)
os=`echo $os | sed -e 's|solaris1|sunos4|'`
;;
@@ -1259,9 +1279,9 @@ case $os in
# Each alternative MUST END IN A *, to match a version number.
# -sysv* is not here because it comes later, after sysvr4.
-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
- | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
- | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
- | -kopensolaris* \
+ | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos |
-sunos[34]*\
+ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* |
-solaris* \
+ | -sym* | -kopensolaris* \
| -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
| -aos* | -aros* \
| -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
@@ -1282,7 +1302,7 @@ case $os in
| -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
| -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
| -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
- | -skyos* | -haiku* | -rdos* | -toppers* | -drops*)
+ | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
# Remember, each alternative MUST END IN *, to match a version number.
;;
-qnx*)
@@ -1612,7 +1632,7 @@ case $basic_machine in
-sunos*)
vendor=sun
;;
- -aix*)
+ -cnk*|-aix*)
vendor=ibm
;;
-beos*)
diff --git a/lib/gnupload b/lib/gnupload
index 55e5c9f..a80ca05 100755
--- a/lib/gnupload
+++ b/lib/gnupload
@@ -1,7 +1,7 @@
#!/bin/sh
# Sign files and upload them.
-scriptversion=2009-04-28.21; # UTC
+scriptversion=2009-11-29.20; # UTC
# Copyright (C) 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation
#
@@ -75,34 +75,28 @@ actual command line options. Use this to keep your
defaults. Comments
(#) and empty lines in $conffile are allowed.
Examples:
-1. Upload automake-1.8.2b.tar.gz and automake-1.8.2b.tar.bz2 to two sites:
- gnupload --to sources.redhat.com:~ftp/pub/automake \\
- --to alpha.gnu.org:automake \\
- automake-1.8.2b.tar.gz automake-1.8.2b.tar.bz2
-
-2. Same as above, but also create symbolic links to automake-latest.tar.*:
- gnupload --to sources.redhat.com:~ftp/pub/automake \\
- --to alpha.gnu.org:automake \\
- --symlink-regex \\
- automake-1.8.2b.tar.gz automake-1.8.2b.tar.bz2
-
-3. Symlink automake-1.8.2b.tar.gz to automake-latest.tar.gz and
-automake-1.8.2b.tar.bz2 to automake-latest.tar.bz2 on both sites:
+1. Upload foobar-1.0.tar.gz to ftp.gnu.org:
+ gnupload --to ftp.gnu.org:foobar foobar-1.0.tar.gz
- gnupload --to sources.redhat.com:~ftp/pub/automake \\
- --to alpha.gnu.org:automake \\
- --symlink automake-1.8.2b.tar.gz automake-latest.tar.gz \\
- automake-1.8.2b.tar.bz2 automake-latest.tar.bz2
+2. Upload foobar-1.0.tar.gz and foobar-1.0.tar.xz to ftp.gnu.org:
+ gnupload --to ftp.gnu.org:foobar foobar-1.0.tar.gz foobar-1.0.tar.xz
-4. Delete automake-1.8.2a.tar.gz and .bz2, remove symlink
-automake-latest.tar.gz and upload automake-1.8.2b.tar.gz:
-
- gnupload --to sources.redhat.com:~ftp/pub/automake \\
- --to alpha.gnu.org:automake \\
- --delete automake-1.8.2a.tar.gz automake-1.8.2a.tar.bz2 \\
- --rmsymlink automake-latest.tar.gz \\
- -- \\
- automake-1.8.2b.tar.gz automake-1.8.2b.tar.bz2
+3. Same as above, and also create symbolic links to foobar-latest.tar.*:
+ gnupload --to ftp.gnu.org:foobar \\
+ --symlink-regex \\
+ foobar-1.0.tar.gz foobar-1.0.tar.xz
+
+4. Upload foobar-0.9.90.tar.gz to two sites:
+ gnupload --to alpha.gnu.org:foobar \\
+ --to sources.redhat.com:~ftp/pub/foobar \\
+ foobar-0.9.90.tar.gz
+
+5. Delete oopsbar-0.9.91.tar.gz and upload foobar-0.9.91.tar.gz
+ (the -- terminates the list of files to delete):
+ gnupload --to alpha.gnu.org:foobar \\
+ --to sources.redhat.com:~ftp/pub/foobar \\
+ --delete oopsbar-0.9.91.tar.gz \\
+ -- foobar-0.9.91.tar.gz
Report bugs to <address@hidden>.
Send patches to <address@hidden>."
diff --git a/lib/texinfo.tex b/lib/texinfo.tex
index 23a30bc..9140826 100644
--- a/lib/texinfo.tex
+++ b/lib/texinfo.tex
@@ -1,9 +1,9 @@
% texinfo.tex -- TeX macros to handle Texinfo files.
-%
+%
% Load plain if necessary, i.e., if running under initex.
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
%
-\def\texinfoversion{2009-03-28.05}
+\def\texinfoversion{2009-08-14.15}
%
% Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
@@ -1332,13 +1332,16 @@ output) for that.)}
\ifpdf
%
- % Color manipulation macros based on pdfcolor.tex.
- \def\cmykDarkRed{0.28 1 1 0.35}
- \def\cmykBlack{0 0 0 1}
+ % Color manipulation macros based on pdfcolor.tex,
+ % except using rgb instead of cmyk; the latter is said to render as a
+ % very dark gray on-screen and a very dark halftone in print, instead
+ % of actual black.
+ \def\rgbDarkRed{0.50 0.09 0.12}
+ \def\rgbBlack{0 0 0}
%
% k sets the color for filling (usual text, etc.);
% K sets the color for stroking (thin rules, e.g., normal _'s).
- \def\pdfsetcolor#1{\pdfliteral{#1 k #1 K}}
+ \def\pdfsetcolor#1{\pdfliteral{#1 rg #1 RG}}
%
% Set color, and create a mark which defines \thiscolor accordingly,
% so that \makeheadline knows which color to restore.
@@ -1348,7 +1351,7 @@ output) for that.)}
\pdfsetcolor{#1}%
}
%
- \def\maincolor{\cmykBlack}
+ \def\maincolor{\rgbBlack}
\pdfsetcolor{\maincolor}
\edef\thiscolor{\maincolor}
\def\lastcolordefs{}
@@ -1443,8 +1446,8 @@ output) for that.)}
%
% by default, use a color that is dark enough to print on paper as
% nearly black, but still distinguishable for online viewing.
- \def\urlcolor{\cmykDarkRed}
- \def\linkcolor{\cmykDarkRed}
+ \def\urlcolor{\rgbDarkRed}
+ \def\linkcolor{\rgbDarkRed}
\def\endlink{\setcolor{\maincolor}\pdfendlink}
%
% Adding outlines to PDF; macros for calculating structure of outlines
@@ -4322,6 +4325,7 @@ end
\definedummyword\code
\definedummyword\command
\definedummyword\dfn
+ \definedummyword\email
\definedummyword\emph
\definedummyword\env
\definedummyword\file
@@ -4396,20 +4400,19 @@ end
\def\bullet{bullet}%
\def\comma{,}%
\def\copyright{copyright}%
- \def\registeredsymbol{R}%
\def\dots{...}%
\def\enddots{...}%
\def\equiv{==}%
\def\error{error}%
\def\euro{euro}%
+ \def\expansion{==>}%
\def\guillemetleft{<<}%
\def\guillemetright{>>}%
\def\guilsinglleft{<}%
\def\guilsinglright{>}%
- \def\expansion{==>}%
\def\minus{-}%
- \def\pounds{pounds}%
\def\point{.}%
+ \def\pounds{pounds}%
\def\print{-|}%
\def\quotedblbase{"}%
\def\quotedblleft{"}%
@@ -4417,8 +4420,9 @@ end
\def\quoteleft{`}%
\def\quoteright{'}%
\def\quotesinglbase{,}%
+ \def\registeredsymbol{R}%
\def\result{=>}%
- \def\textdegree{degrees}%
+ \def\textdegree{o}%
%
% We need to get rid of all macros, leaving only the arguments (if present).
% Of course this is not nearly correct, but it is the best we can do for now.
@@ -9272,12 +9276,8 @@ directory should work if nowhere else does.}
@markupsetuplqdefault
@markupsetuprqdefault
address@hidden Gnulib now utterly and painfully insists on no trailing
whitespace.
address@hidden So we have to nuke it.
-
@c Local variables:
@c eval: (add-hook 'write-file-hooks 'time-stamp)
address@hidden eval: (add-hook 'write-file-hooks 'nuke-trailing-whitespace)
@c page-delimiter: "^\\\\message"
@c time-stamp-start: "def\\\\texinfoversion{"
@c time-stamp-format: "%:y-%02m-%02d.%02H"
diff --git a/m4/Makefile.in b/m4/Makefile.in
index 8a76de2..979fe6c 100644
--- a/m4/Makefile.in
+++ b/m4/Makefile.in
@@ -1,4 +1,4 @@
-# Makefile.in generated by automake 1.10.2a from Makefile.am.
+# Makefile.in generated by automake 1.10.3a from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@@ -92,6 +92,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
diff --git a/m4/amversion.m4 b/m4/amversion.m4
index a2b1184..64490ba 100644
--- a/m4/amversion.m4
+++ b/m4/amversion.m4
@@ -15,7 +15,7 @@ AC_DEFUN([AM_AUTOMAKE_VERSION],
[am__api_version='1.10'
dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
dnl require some minimum version. Point them to the right macro.
-m4_if([$1], [1.10.2a], [],
+m4_if([$1], [1.10.3a], [],
[AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
])
@@ -31,7 +31,7 @@ m4_define([_AM_AUTOCONF_VERSION], [])
# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.10.2a])dnl
+[AM_AUTOMAKE_VERSION([1.10.3a])dnl
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
diff --git a/tests/Makefile.am b/tests/Makefile.am
index cfcd608..84a5c49 100644
--- a/tests/Makefile.am
+++ b/tests/Makefile.am
@@ -82,6 +82,7 @@ canon5.test \
canon-name.test \
ccnoco.test \
ccnoco2.test \
+ccnoco3.test \
check.test \
check2.test \
check3.test \
@@ -527,6 +528,7 @@ subdir6.test \
subdir7.test \
subdir8.test \
subdir9.test \
+subdir10.test \
subdirbuiltsources.test \
subcond.test \
subcond2.test \
diff --git a/tests/Makefile.in b/tests/Makefile.in
index 011dbed..2028cb6 100644
--- a/tests/Makefile.in
+++ b/tests/Makefile.in
@@ -1,4 +1,4 @@
-# Makefile.in generated by automake 1.10.2a from Makefile.am.
+# Makefile.in generated by automake 1.10.3a from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@@ -82,6 +82,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
@@ -216,6 +217,7 @@ canon5.test \
canon-name.test \
ccnoco.test \
ccnoco2.test \
+ccnoco3.test \
check.test \
check2.test \
check3.test \
@@ -661,6 +663,7 @@ subdir6.test \
subdir7.test \
subdir8.test \
subdir9.test \
+subdir10.test \
subdirbuiltsources.test \
subcond.test \
subcond2.test \
diff --git a/tests/ccnoco3.test b/tests/ccnoco3.test
new file mode 100755
index 0000000..2e9cd37
--- /dev/null
+++ b/tests/ccnoco3.test
@@ -0,0 +1,81 @@
+#! /bin/sh
+# Copyright (C) 2001, 2002, 2008, 2009 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# Test to make sure `compile' doesn't call 'mv SRC SRC'.
+
+required=gcc
+. ./defs || Exit 1
+
+set -e
+
+cat >> configure.in << 'END'
+AC_PROG_CC
+AM_PROG_CC_C_O
+AC_OUTPUT
+END
+
+cat > Makefile.am << 'END'
+AUTOMAKE_OPTIONS = subdir-objects
+bin_PROGRAMS = wish
+wish_SOURCES = a.c
+END
+
+mkdir sub
+
+cat > a.c << 'END'
+#include <stdio.h>
+
+int main ()
+{
+ printf ("hi\n");
+}
+END
+
+cat > Mycomp << 'END'
+#!/bin/sh
+
+case " "$* in
+ *\ -c*\ -o* | *\ -o*\ -c*)
+ exit 1
+ ;;
+esac
+
+exec gcc "$@"
+END
+
+chmod +x Mycomp
+
+# Ignore user CFLAGS.
+CFLAGS=
+export CFLAGS
+
+$ACLOCAL
+$AUTOCONF
+$AUTOMAKE --copy --add-missing
+
+mkdir build
+cd build
+
+# Make sure the compiler doesn't understand `-c -o'
+CC=`pwd`/../Mycomp
+export CC
+
+../configure
+$MAKE 2>stderr || { cat stderr >&2; Exit 1; }
+cat stderr >&2
+grep 'mv.*the same file' stderr && Exit 1
+
+Exit 0
diff --git a/tests/libtoo11.test b/tests/subdir10.test
similarity index 63%
copy from tests/libtoo11.test
copy to tests/subdir10.test
index 030e2d3..c71216b 100755
--- a/tests/libtoo11.test
+++ b/tests/subdir10.test
@@ -1,9 +1,9 @@
#! /bin/sh
-# Copyright (C) 2008 Free Software Foundation, Inc.
+# Copyright (C) 2009 Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3, or (at your option)
+# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
@@ -14,25 +14,26 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
-# Make sure config.lt is removed with Libtool 2.2.x's LT_OUTPUT.
-# Report by Charles Wilson.
+# SUDBIRS with $fail set in the environment.
-required=libtoolize
. ./defs || Exit 1
+
set -e
-cat >> configure.in << 'END'
-AC_PROG_LIBTOOL
-m4_ifdef([LT_OUTPUT], [LT_OUTPUT])
+mkdir sub
+
+cat >> configure.in <<'END'
+AC_CONFIG_FILES([sub/Makefile])
AC_OUTPUT
END
-: > Makefile.am
+echo SUBDIRS = sub >Makefile.am
+: > sub/Makefile.am
-libtoolize
$ACLOCAL
-$AUTOMAKE --add-missing
$AUTOCONF
+$AUTOMAKE
./configure
-$MAKE distcheck
-:
+env fail=1 $MAKE all clean
+
+Exit 0
hooks/post-receive
--
GNU Automake
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Automake-commit] [SCM] GNU Automake branch, branch-1-10, updated. v1.10.2-81-g2d04de7,
Ralf Wildenhues <=