[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Automake-commit] [SCM] GNU Automake branch, yacc-work, updated. v1.11-4
|
From: |
Stefano Lattarini |
|
Subject: |
[Automake-commit] [SCM] GNU Automake branch, yacc-work, updated. v1.11-474-g94f3f89 |
|
Date: |
Fri, 08 Jul 2011 12:37:43 +0000 |
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "GNU Automake".
http://git.sv.gnu.org/gitweb/?p=automake.git;a=commitdiff;h=94f3f898ff4bac2c67c254b7bf933a2698f0115c
The branch, yacc-work has been updated
via 94f3f898ff4bac2c67c254b7bf933a2698f0115c (commit)
via edee35da30481a0fa26800bd514bb177416f7e83 (commit)
via 9d1a3a28e52edf568f5edd598446d00c6deebec4 (commit)
via b01fc0873d749b73fcd54378772d36c05ce81bf2 (commit)
via 76cfe59c148e8ba4299fbd2ee9f29ede6198698e (commit)
via 8285d525bfa39018781f5c49b5caa3a44960b8b1 (commit)
via 839b1e34dce6a7038573157a10a4000488926f8d (commit)
via fae45c77d9dfd2b566730bf80fc17d91d61a6931 (commit)
via e58e5f493fa0856d6782549d978c3f1d5f24de8f (commit)
via 8c7c3b592e8fe01e263ade96eddbc85f2619943c (commit)
via 044035ce85d089a9bbdfd6fa99c31dd22b74e7db (commit)
via f8cb365330f9b00aa821b5d64239c94d7b4284c1 (commit)
via a44667dce47afd200d990910f8e8a966276be756 (commit)
from 3efb29e48c0721a6d270c3c2a3e91c71792f1e2c (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
-----------------------------------------------------------------------
Summary of changes:
ChangeLog | 62 +++++++++++
HACKING | 7 +-
doc/automake.texi | 55 +++++++--
lib/am/configure.am | 7 +-
tests/Makefile.am | 6 +
tests/Makefile.in | 6 +
tests/README | 7 +
...{autodist-acconfig.test => amhello-binpkg.test} | 37 +++----
tests/amhello-cflags.test | 51 +++++++++
tests/amhello-cross-compile.test | 54 +++++++++
tests/interp.test | 18 ++-
tests/parallel-tests-log-compiler-example.test | 71 ++++++++++++
tests/remake-subdir-long-time.test | 116 ++++++++++++++++++++
tests/specflg8.test | 35 +++---
...ment.test => tests-environment-backcompat.test} | 32 ++++--
tests/txinfo21.test | 4 +-
16 files changed, 497 insertions(+), 71 deletions(-)
copy tests/{autodist-acconfig.test => amhello-binpkg.test} (57%)
create mode 100755 tests/amhello-cflags.test
create mode 100755 tests/amhello-cross-compile.test
create mode 100755 tests/parallel-tests-log-compiler-example.test
create mode 100755 tests/remake-subdir-long-time.test
copy tests/{check-tests_environment.test => tests-environment-backcompat.test}
(53%)
diff --git a/ChangeLog b/ChangeLog
index 3fe433b..bf7655b 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,65 @@
+2011-07-08 Stefano Lattarini <address@hidden>
+
+ tests: fix weakness in 'tests-environment-backcompat.test'
+ * tests/tests-environment-backcompat.test: Do not override the
+ content of xfailing test `baz.test' with a "weaker" version that
+ fails unconditionally: the test must fail only when the 'strict'
+ pragma is in use, in order not to reduce coverage.
+
+2011-07-08 Stefano Lattarini <address@hidden>
+
+ docs, tests: synchronize examples on silent-rules from config.site
+ * doc/automake.texi (Automake silent-rules Option): Reference test
+ 'silent-configsite.test' in comments.
+
+2011-07-08 Stefano Lattarini <address@hidden>
+
+ tests: portability fixes in tests on amhello examples
+ * tests/amhello-binpkg.test: Don't use "tar xzf too.tag.gz" to
+ extract a gzip-compressed tarball, that's unportable to some
+ tar implementations; use the "gzip -dc fo.tar.gz | tar xf -"
+ idiom instead.
+ * tests/amhello-cflags.test: Likewise.
+ * tests/amhello-cross-compile.test: Likewise.
+ Suggestion from Ralf Wildenhues.
+
+2011-07-04 Stefano Lattarini <address@hidden>
+
+ remake: add test ensuring that slower remakes don't hang
+ * tests/remake-subdir-long-time.test: New test.
+ * tests/Makefile.am (TESTS): Update.
+ Suggestion by Ralf Wildenhues.
+
+2011-07-04 Stefano Lattarini <address@hidden>
+
+ remake: fix outdated comment in configure.am
+ * lib/am/configure.am: Fix comment falsified by changes in
+ commit `v1.11-366-gbee9871'.
+ Suggestion by Ralf Wildenhues.
+
+2011-07-01 Stefano Lattarini <address@hidden>
+
+ docs, tests: synchronize examples from docs to tests
+ * tests/README (Writing test cases): Give suggestions on how to
+ keep test cases and examples in the documentation synchronized.
+ * doc/automake.texi: Improve or fix existing testcase-referencing
+ comments, and add many new ones.
+ * HACKING (Administrivia): Suggest to test complex examples and
+ idioms from the manual.
+ * tests/specflg8.test: Improve synchronization with the example
+ in the manual.
+ * tests/output11.test:Likewise.
+ * tests/txinfo21.test:Likewise.
+ * tests/interp.test: Likewise. Since we are at it, and enable
+ the `errexit' shell flag, do related changes, and add trailing
+ `:'command.
+ * tests/amhello-cflags.test: New test.
+ * tests/amhello-cross-compile.test: Likewise.
+ * tests/amhello-binpkg.test: Likewise.
+ * tests/tests-environment-backcompat.test: Likewise.
+ * tests/parallel-tests-log-compiler-example.test: Likewise.
+ * tests/Makefile.am (TESTS): Update.
+
2011-06-28 Stefano Lattarini <address@hidden>
yacc tests: fix bug in 'yacc-cxx.test'
diff --git a/HACKING b/HACKING
index a3e37f0..334d74c 100644
--- a/HACKING
+++ b/HACKING
@@ -20,6 +20,10 @@
* If somebody reports a new bug, mention his name in the ChangeLog entry
and in the test case you write. Put him into THANKS.
+* When documenting a non-trivial idiom or example in the manual, be
+ sure to add a test case for it, and to reference such test case from
+ a proper Texinfo comment.
+
* The correct response to most actual bugs is to write a new test case
which demonstrates the bug. Then fix the bug, re-run the test suite,
and check everything in.
@@ -240,7 +244,8 @@
-----
-Copyright (C) 2003, 2007, 2008, 2010 Free Software Foundation, Inc.
+Copyright (C) 2003, 2007, 2008, 2010, 2011 Free Software Foundation,
+Inc.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
diff --git a/doc/automake.texi b/doc/automake.texi
index a02cea5..67c1b97 100644
--- a/doc/automake.texi
+++ b/doc/automake.texi
@@ -904,6 +904,7 @@ GNU Make Manual}).
VPATH builds have other interesting uses. One is to build the same
sources with multiple configurations. For instance:
address@hidden Keep in sync with amhello-cflags.test.
@example
~ % @kbd{tar zxf ~/amhello-1.0.tar.gz}
~ % @kbd{cd amhello-1.0}
@@ -1055,6 +1056,7 @@ instance my cross-compiler for MinGW32 has its binaries
called
Here is how we could build @code{amhello-1.0} for
@code{i586-mingw32msvc} on a GNU/Linux PC.
address@hidden Keep in sync with amhello-cross-compile.test.
@smallexample
~/amhello-1.0 % @kbd{./configure --build i686-pc-linux-gnu --host
i586-mingw32msvc}
checking for a BSD-compatible install... /usr/bin/install -c
@@ -1169,6 +1171,7 @@ by some means.
For instance here is how we could create a binary package containing a
snapshot of all the files to be installed.
address@hidden Keep in sync with amhello-binpkg.test.
@example
~/amhello-1.0 % @kbd{./configure --prefix /usr}
@dots{}
@@ -1848,6 +1851,7 @@ When examining a variable definition, Automake will
recursively examine
variables referenced in the definition. For example, if Automake is
looking at the content of @code{foo_SOURCES} in this snippet
address@hidden Keep in sync with interp.test.
@example
xs = a.c b.c
foo_SOURCES = c.c $(xs)
@@ -2026,6 +2030,7 @@ defined (e.g., @samp{zardir}).
For instance, the following snippet will install @file{file.xml} into
@samp{$(datadir)/xml}.
address@hidden Keep in sync with primary-prefix-couples-documented-valid.test.
@example
xmldir = $(datadir)/xml
xml_DATA = file.xml
@@ -2036,6 +2041,7 @@ performs to diagnose suspicious directory/primary couples
(in the
unlikely case these checks are undesirable, and you really know what
you're doing). For example, Automake would error out on this input:
address@hidden Should be tested in primary-prefix-invalid-couples.test.
@example
# Forbidden directory combinations, automake will error out on this.
pkglib_PROGRAMS = foo
@@ -2045,6 +2051,7 @@ doc_LIBRARIES = libquux.a
@noindent
but it will succeed with this:
address@hidden Keep in sync with primary-prefix-couples-documented-valid.test.
@example
# Work around forbidden directory combinations. Do not use this
# without a very good reason!
@@ -2125,6 +2132,7 @@ data_DATA = file1 @dots{} address@hidden address@hidden
@dots{} address@hidden
@noindent
may also be written as
address@hidden Keep in sync with primary-prefix-couples-documented-valid.test.
@example
data_DATA = file1 @dots{} address@hidden
data2dir = $(datadir)
@@ -2455,6 +2463,7 @@ example in the manual. However if you were to build
@code{true} and
@code{false} in real life, you would probably use per-program
compilation flags, like so:
address@hidden Keep in sync with specflg7.test and specflg8.test.
@example
bin_PROGRAMS = false true
@@ -2778,6 +2787,7 @@ literals. If part of the specification uses shell
variables,
@command{automake} will not be able to fulfill this setup, and you will
have to complete the missing bits by hand. For instance, on
address@hidden Keep in sync with output11.test.
@example
file=input
@dots{}
@@ -2793,6 +2803,7 @@ source file.)
Similarly
address@hidden Keep in sync with output11.test.
@example
file=output
file2=out:in
@@ -3420,6 +3431,7 @@ installs this macro so that @command{aclocal} will find
it.
A macro file's name should end in @file{.m4}. Such files should be
installed in @file{$(datadir)/aclocal}. This is as simple as writing:
address@hidden Keep in sync with primary-prefix-couples-documented-valid.test.
@example
aclocaldir = $(datadir)/aclocal
aclocal_DATA = mymacro.m4 myothermacro.m4
@@ -4258,9 +4270,7 @@ does not know the possible values of these variables. In
this case
@cindex @code{SUBDIRS} and @code{AM_CONDITIONAL}
@cindex @code{AM_CONDITIONAL} and @code{SUBDIRS}
address@hidden The test case for the setup described here is
address@hidden test/subdircond2.test
address@hidden Try to keep it in sync.
address@hidden Keep in sync with subcond2.test.
@file{configure} should output the @file{Makefile} for each directory
and define a condition into which @file{opt/} should be built.
@@ -4300,9 +4310,7 @@ automatically because it knows that @code{MAYBE_OPT} can
contain
@cindex @code{SUBDIRS} and @code{AC_SUBST}
@cindex @code{AC_SUBST} and @code{SUBDIRS}
address@hidden The test case for the setup described here is
address@hidden test/subdircond3.test
address@hidden Try to keep it in sync.
address@hidden Keep in sync with subcond3.test.
Another possibility is to define @code{MAYBE_OPT} from
@file{./configure} using @code{AC_SUBST}:
@@ -4460,6 +4468,7 @@ often be replaced by several variables, one for each
destination
directory (@pxref{Uniform}). For instance, the last example could be
rewritten as follows:
address@hidden Keep in sync with primary-prefix-couples-documented-valid.test.
@example
imagesdir = $(pkgdatadir)/images
soundsdir = $(pkgdatadir)/sounds
@@ -4910,6 +4919,7 @@ You can also use Automake conditionals
(@pxref{Conditionals}) to
select programs to be built. In this case you don't have to worry
about @samp{$(EXEEXT)} or @code{EXTRA_PROGRAMS}.
address@hidden Keep in sync with exeext.test.
@example
bin_PROGRAMS = cpio pax
if WANT_MT
@@ -4960,6 +4970,7 @@ Extra objects can be added to a library using the
@address@hidden variable. This should be used for objects
determined by @command{configure}. Again from @code{cpio}:
address@hidden Keep in sync with pr401c.test.
@example
libcpio_a_LIBADD = $(LIBOBJS) $(ALLOCA)
@end example
@@ -5163,6 +5174,7 @@ relates to @file{libfoo.la} or @file{libbar.la} at the
time it creates
the link rule for these two libraries. Therefore the @option{-rpath}
argument must be explicitly supplied.
address@hidden Keep in sync with ltcond.test.
@example
EXTRA_LTLIBRARIES = libfoo.la libbar.la
lib_LTLIBRARIES = $(WANTEDLIBS)
@@ -5178,6 +5190,7 @@ Automake is able to compute the @option{-rpath} setting
itself, because
it's clear that both libraries will end up in @samp{$(libdir)} if they
are installed.
address@hidden Keep in sync with ltcond.test.
@example
lib_LTLIBRARIES =
if WANT_LIBFOO
@@ -5204,6 +5217,7 @@ we could build a @file{libhello.la} library using either
@file{hello-linux.c} or @file{hello-generic.c} with the following
@file{Makefile.am}.
address@hidden Keep in sync with ltcond2.test.
@example
lib_LTLIBRARIES = libhello.la
libhello_la_SOURCES = hello-common.c
@@ -5218,6 +5232,7 @@ either @file{hello-linux.lo} or @address@hidden
Or we could simply use an Automake conditional as follows.
address@hidden Keep in sync with ltcond2.test.
@example
lib_LTLIBRARIES = libhello.la
libhello_la_SOURCES = hello-common.c
@@ -5257,6 +5272,7 @@ dependency anywhere it won't be built (this is why
Here is a sample setup merging libtool convenience libraries from
subdirectories into one main @file{libtop.la} library.
address@hidden Keep in sync with ltconv.test.
@example
# -- Top-level Makefile.am --
SUBDIRS = sub1 sub2 @dots{}
@@ -7479,6 +7495,7 @@ variable explicitly prevents byte-compilation.
Since Automake 1.8, we now recommend using @code{lisp_DATA} instead:
address@hidden Keep in sync with primary-prefix-couples-documented-valid.test.
@example
lisp_DATA = file1.el file2.el
@end example
@@ -7532,6 +7549,7 @@ files are not included in the distribution, you should
use the
Here is a typical setup for distributing @file{.java} files and
installing the @file{.class} files resulting from their compilation.
address@hidden Keep in sync with primary-prefix-couples-documented-valid.test.
@example
javadir = $(datadir)/java
dist_java_JAVA = a.java b.java @dots{}
@@ -7605,6 +7623,7 @@ Automake ships with an Autoconf macro called
@code{AM_PATH_PYTHON}
that will determine some Python-related directory variables (see
below). If you have called @code{AM_PATH_PYTHON} from
@file{configure.ac}, then you may use the variables
address@hidden Keep in sync with primary-prefix-couples-documented-valid.test.
@code{python_PYTHON} or @code{pkgpython_PYTHON} to list Python source
files in your @file{Makefile.am}, depending on where you want your files
installed (see the definitions of @code{pythondir} and
@@ -7693,6 +7712,7 @@ This is the directory where Python extension modules
(shared libraries)
should be installed. An extension module written in C could be declared
as follows to Automake:
address@hidden Keep in sync with primary-prefix-couples-documented-valid.test.
@example
pyexec_LTLIBRARIES = quaternion.la
quaternion_la_SOURCES = quaternion.c support.c support.h
@@ -7889,6 +7909,7 @@ passed to @code{makeinfo} when building @file{.info}
files; and
@samp{$(AM_MAKEINFOHTMLFLAGS)} is used when building @file{.html}
files.
address@hidden Keep in sync with txinfo21.test.
For instance, the following setting can be used to obtain one single
@file{.html} file per manual, without node separators.
@example
@@ -8114,10 +8135,11 @@ Variables using the standard directory prefixes
@samp{bin},
For instance, @code{data_DATA} files are installed by @code{install-data},
while @code{bin_PROGRAMS} files are installed by @code{install-exec}.
-Any variable using a user-defined directory prefix with @samp{exec} in
-the name (e.g., @code{myexecbin_PROGRAMS}) is installed by
address@hidden All other user-defined prefixes are installed by
address@hidden
+Any variable using a user-defined directory prefix with
address@hidden in the name (e.g.,
address@hidden Keep in sync with primary-prefix-couples-documented-valid.test.
address@hidden) is installed by @code{install-exec}. All
+other user-defined prefixes are installed by @code{install-data}.
@node Extending Installation
@section Extending Installation
@@ -8302,7 +8324,7 @@ included if they are found in the current directory
(either physically,
or as the target of a @file{Makefile.am} rule); this list is printed by
@samp{automake --help}. Note that some files in this list are actually
distributed only if other certain conditions hold (for example,
address@hidden The following example is covered by autodist-config-headers.test.
address@hidden Keep in sync with autodist-config-headers.test.
the @file{config.h.top} and @file{config.h.bot} files are automatically
distributed only if, e.g., @samp{AC_CONFIG_HEADERS([config.h])} is used
in @file{configure.ac}). Also, files that are read by @command{configure}
@@ -8492,6 +8514,7 @@ If you want @code{distcleancheck} to ignore built files
that have not
been cleaned because they are also part of the distribution, add the
following definition instead:
address@hidden Keep in sync with distcleancheck.test.
@example
distcleancheck_listfiles = \
find . -type f -exec sh -c 'test -f $(srcdir)/$$1 || echo $$1' \
@@ -8640,6 +8663,7 @@ set @code{TESTS_ENVIRONMENT} to an invocation of the
shell (e.g.
interpreter. For instance, the following setup may be used to run tests
with Perl:
address@hidden Keep in sync with tests-environment-backcompat.test.
@example
TESTS_ENVIRONMENT = $(PERL) -Mstrict -w
TESTS = foo.pl bar.pl baz.pl
@@ -8735,6 +8759,7 @@ this extension to be called with this driver. For all
tests without a
registered extension, the variables @code{LOG_COMPILER},
@code{AM_LOG_FLAGS}, and @code{LOG_FLAGS} may be used. For example,
address@hidden Keep in sync with parallel-tests-log-compiler-example.test.
@example
TESTS = foo.pl bar.py baz
TEST_EXTENSIONS = .pl .py
@@ -8808,6 +8833,7 @@ whose testsuite takes long time to execute. Luckily,
this problem can
easily be avoided by overriding also @code{TEST_SUITE_LOG} at runtime;
for example,
address@hidden Keep in sync with parallel-tests-log-override-2.test.
@example
env TEST_SUITE_LOG=partial.log TESTS="..." make -e check
@end example
@@ -9511,6 +9537,7 @@ For instance, the following definition prevents Automake
from misinterpreting
the @samp{.idlC.cpp:} rule as an attempt to transform @file{.idlC} files into
@file{.cpp} files.
address@hidden Keep in sync with suffix7.test.
@example
SUFFIXES = .idl C.cpp
.idlC.cpp:
@@ -9979,6 +10006,7 @@ make silent rules enabled by default in his own package
can do so by
adding a @samp{yes} argument to the @code{AM_SILENT_RULES} call in
@file{configure.ac}. We advise against this approach, though.
address@hidden Keep in sync with silent-configsite.test
Users who prefer to have silent rules enabled by default can edit their
@file{config.site} file to make the variable @code{enable_silent_rules}
default to @samp{yes}. This should still allow disabling silent rules
@@ -10339,6 +10367,7 @@ Checks, autoconf, The Autoconf Manual}) and use
@samp{$(LN_S)} in
For instance, here is how you could install a versioned copy of a
program using @samp{$(LN_S)}:
address@hidden Keep in sync with insthook.test
@example
install-exec-hook:
cd $(DESTDIR)$(bindir) && \
@@ -10353,7 +10382,9 @@ destination directory in order to create relative links.
When writing @code{install-exec-hook} or @code{install-data-hook},
please bear in mind that the exec/data distinction is based on the
installation directory, not on the primary used (@pxref{The Two Parts of
-Install}). So a @code{foo_SCRIPTS} will be installed by
+Install}).
address@hidden Keep in sync with primary-prefix-couples-documented-valid.test.
+So a @code{foo_SCRIPTS} will be installed by
@code{install-data}, and a @code{barexec_SCRIPTS} will be installed by
@code{install-exec}. You should define your hooks consequently.
diff --git a/lib/am/configure.am b/lib/am/configure.am
index d00846a..594ec67 100644
--- a/lib/am/configure.am
+++ b/lib/am/configure.am
@@ -17,9 +17,10 @@
## This dummy rule is called from subdirectories whenever one of the
-## top-level Makefile's dependencies must be updated. It does not
-## need to depend on %MAKEFILE% because GNU make will always make sure
-## %MAKEFILE% is updated before considering the am--refresh target.
+## top-level Makefile's dependencies must be updated. It does depend
+## on %MAKEFILE% for the benefit of non-GNU make implementations (GNU
+## make will always make sure %MAKEFILE% is updated before considering
+## the am--refresh target anyway).
if %?TOPDIR_P%
.PHONY: am--refresh
am--refresh: %MAKEFILE%
diff --git a/tests/Makefile.am b/tests/Makefile.am
index 0d3801b..01e5fcc 100644
--- a/tests/Makefile.am
+++ b/tests/Makefile.am
@@ -87,6 +87,9 @@ alloca.test \
alloca2.test \
alpha.test \
alpha2.test \
+amhello-cflags.test \
+amhello-cross-compile.test \
+amhello-binpkg.test \
amassign.test \
ammissing.test \
amopt.test \
@@ -159,6 +162,7 @@ check11.test \
check-exported-srcdir.test \
check-tests-in-builddir.test \
check-tests_environment.test \
+tests-environment-backcompat.test \
checkall.test \
clean.test \
clean2.test \
@@ -611,6 +615,7 @@ parallel-tests-subdir.test \
parallel-tests-log-override-1.test \
parallel-tests-log-override-2.test \
parallel-tests-log-override-recheck.test \
+parallel-tests-log-compiler-example.test \
parse.test \
percent.test \
percent2.test \
@@ -682,6 +687,7 @@ remake-subdir-from-subdir.test \
remake-subdir-gnu.test \
remake-subdir.test \
remake-subdir2.test \
+remake-subdir-long-time.test \
pr8365-remake-timing.test \
regex.test \
req.test \
diff --git a/tests/Makefile.in b/tests/Makefile.in
index 32d0ee7..524366b 100644
--- a/tests/Makefile.in
+++ b/tests/Makefile.in
@@ -364,6 +364,9 @@ alloca.test \
alloca2.test \
alpha.test \
alpha2.test \
+amhello-cflags.test \
+amhello-cross-compile.test \
+amhello-binpkg.test \
amassign.test \
ammissing.test \
amopt.test \
@@ -436,6 +439,7 @@ check11.test \
check-exported-srcdir.test \
check-tests-in-builddir.test \
check-tests_environment.test \
+tests-environment-backcompat.test \
checkall.test \
clean.test \
clean2.test \
@@ -888,6 +892,7 @@ parallel-tests-subdir.test \
parallel-tests-log-override-1.test \
parallel-tests-log-override-2.test \
parallel-tests-log-override-recheck.test \
+parallel-tests-log-compiler-example.test \
parse.test \
percent.test \
percent2.test \
@@ -959,6 +964,7 @@ remake-subdir-from-subdir.test \
remake-subdir-gnu.test \
remake-subdir.test \
remake-subdir2.test \
+remake-subdir-long-time.test \
pr8365-remake-timing.test \
regex.test \
req.test \
diff --git a/tests/README b/tests/README
index 57b2ddb..ca17c4f 100644
--- a/tests/README
+++ b/tests/README
@@ -93,6 +93,13 @@ Do
Cite the PR number (if any), and the original reporter (if any), so
we can find or ask for information if needed.
+ If a test checks examples or idioms given in the documentation, make
+ sure the documentation reference them appropriately in comments, as in:
+ @c Keep in sync with autodist-config-headers.test.
+ @example
+ ...
+ @end example
+
Use `required=...' for required tools. Do not explicitly require
tools which can be taken for granted because they're listed in the
GNU Coding Standards (for example, `gzip').
diff --git a/tests/autodist-acconfig.test b/tests/amhello-binpkg.test
similarity index 57%
copy from tests/autodist-acconfig.test
copy to tests/amhello-binpkg.test
index 49ab2f0..34600fe 100755
--- a/tests/autodist-acconfig.test
+++ b/tests/amhello-binpkg.test
@@ -14,33 +14,30 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
-# Check that `acconfig.h' is automatically distributed if it exists
-# (at automake runtime).
-# Related to automake bug#7819.
+# Test an example from the manual about the `amhello' package:
+# using DESTDIR to build simple, no-frills binary packages.
. ./defs || Exit 1
set -e
-cat >> configure.in <<END
-AC_OUTPUT
-END
-
-cat > Makefile.am <<'END'
-.PHONY: test
-test: distdir
- ls -l $(distdir)
- echo ' ' $(DIST_COMMON) ' ' | grep '[ /]acconfig\.h '
- test -f $(distdir)/acconfig.h
-END
+cp "$testsrcdir"/../doc/amhello-1.0.tar.gz . \
+ || fatal_ "cannot get amhello tarball"
-: > acconfig.h
+gzip -dc amhello-1.0.tar.gz | tar xf -
+cd amhello-1.0
-$ACLOCAL
-$AUTOMAKE
-$AUTOCONF
+./configure --prefix /usr
+make
+make DESTDIR="`pwd`/inst" install
+cd inst
+find . -type f -print > ../files.lst
+tar cvf amhello-1.0-i686.tar.gz `cat ../files.lst` > t
+LC_ALL=C sort t > tar.got
-./configure
-$MAKE test
+diff - tar.got <<'END'
+./usr/bin/hello
+./usr/share/doc/amhello/README
+END
:
diff --git a/tests/amhello-cflags.test b/tests/amhello-cflags.test
new file mode 100755
index 0000000..56f7729
--- /dev/null
+++ b/tests/amhello-cflags.test
@@ -0,0 +1,51 @@
+#! /bin/sh
+# Copyright (C) 2011 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# Test an example from the manual about the `amhello' package:
+# using VPATH builds to configure the same package with different
+# options.
+
+required=gcc
+. ./defs || Exit 1
+
+set -e
+
+cp "$testsrcdir"/../doc/amhello-1.0.tar.gz . \
+ || fatal_ "cannot get amhello tarball"
+
+gzip -dc amhello-1.0.tar.gz | tar xf -
+cd amhello-1.0
+
+mkdir debug optim
+cd debug
+../configure CFLAGS='-g -O0'
+$MAKE
+ls -l . src # For debugging.
+cd ../optim
+../configure CFLAGS='-O3 -fomit-frame-pointer'
+$MAKE
+ls -l . src # For debugging.
+cd ..
+
+# Check that we have really compiled the objects with two different
+# configurations.
+for exeext in '' .exe :; do
+ test -f optim/src/hello$exeext && break
+ test "$exeext" = : && fatal_ "cannot determine extension of executables"
+done
+cmp optim/src/hello$exeext debug/src/hello$exeext && Exit 1
+
+:
diff --git a/tests/amhello-cross-compile.test b/tests/amhello-cross-compile.test
new file mode 100755
index 0000000..6db91ba
--- /dev/null
+++ b/tests/amhello-cross-compile.test
@@ -0,0 +1,54 @@
+#! /bin/sh
+# Copyright (C) 2011 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# Test an example from the manual about the `amhello' package:
+# cross-compiling a package from Linux/Unix to MinGW.
+
+required=i586-mingw32msvc-gcc
+. ./defs || Exit 1
+
+set -e
+
+cp "$testsrcdir"/../doc/amhello-1.0.tar.gz . \
+ || fatal_ "cannot get amhello tarball"
+
+host=i586-mingw32msvc
+build=`"$testsrcdir"/../lib/config.guess` && test -n "$build" \
+ || fatal_ "cannot guess build platform"
+case $build in *mingw*) skip_ "build system is MinGW too";; esac
+
+gzip -dc amhello-1.0.tar.gz | tar xf -
+cd amhello-1.0
+
+./configure --build "$build" --host "$host" > stdout \
+ || { cat stdout ; Exit 1; }
+cat stdout
+grep '^checking for i586-mingw32msvc-strip\.\.\.' stdout
+grep '^checking for i586-mingw32msvc-gcc\.\.\.' stdout
+grep '^checking for suffix of executables\.\.\. \.exe *$' stdout
+grep '^checking for suffix of object files\.\.\. o *$' stdout
+grep '^checking whether i586-mingw32msvc-gcc accepts -g\.\.\. yes' stdout
+
+$MAKE
+
+cd src
+file hello.exe > whatis
+cat whatis
+$EGREP 'DOS|Win' whatis
+grep 'executable' whatis
+grep 'ELF' whatis && Exit 1
+
+:
diff --git a/tests/interp.test b/tests/interp.test
index af82e33..05464d2 100755
--- a/tests/interp.test
+++ b/tests/interp.test
@@ -18,17 +18,23 @@
. ./defs || Exit 1
+set -e
+
cat >> configure.in << 'END'
AC_PROG_CC
END
cat > Makefile.am << 'END'
-bin_PROGRAMS = qqq
-s1 = z.c
-qqq_SOURCES = $(s1)
+bin_PROGRAMS = foo
+xs = a.c b.c
+foo_SOURCES = c.c $(xs)
END
-$ACLOCAL || Exit 1
-$AUTOMAKE || Exit 1
+$ACLOCAL
+$AUTOMAKE
+
+$FGREP ' a.$(OBJEXT)' Makefile.in
+$FGREP ' b.$(OBJEXT)' Makefile.in
+$FGREP ' c.$(OBJEXT)' Makefile.in
-$FGREP 'z.$(OBJEXT)' Makefile.in
+:
diff --git a/tests/parallel-tests-log-compiler-example.test
b/tests/parallel-tests-log-compiler-example.test
new file mode 100755
index 0000000..746c128
--- /dev/null
+++ b/tests/parallel-tests-log-compiler-example.test
@@ -0,0 +1,71 @@
+#! /bin/sh
+# Copyright (C) 2011 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# Test the example of usage of generic and extension-specific
+# LOG_COMPILER and LOG_FLAGS given in the manual.
+
+parallel_tests=yes
+required=python
+. ./defs || Exit 1
+
+set -e
+
+cat >> configure.in <<END
+AC_SUBST([PERL], ['$PERL'])
+AM_PATH_PYTHON
+AC_OUTPUT
+END
+
+cat > Makefile.am << 'END'
+TESTS = foo.pl bar.py baz
+TEST_EXTENSIONS = .pl .py
+PL_LOG_COMPILER = $(PERL)
+AM_PL_LOG_FLAGS = -w
+PY_LOG_COMPILER = $(PYTHON)
+AM_PY_LOG_FLAGS = -v
+LOG_COMPILER = ./wrapper-script
+AM_LOG_FLAGS = -d
+END
+
+echo 'my $a =+ 2; exit (0);' > foo.pl
+echo 'import sys; sys.exit(0);' > bar.py
+: > baz
+
+cat > wrapper-script <<'END'
+#!/bin/sh
+echo "wrapper args: $*"
+END
+chmod a+x wrapper-script
+
+$ACLOCAL
+$AUTOCONF
+$AUTOMAKE -a
+
+./configure
+
+st=0
+$MAKE check || st=$?
+cat foo.log
+cat bar.log
+cat baz.log
+test $st -eq 0 || Exit $st
+
+# Check that the wrappers have been run with the expected flags.
+grep '[rR]eversed.*+=.*operator.*foo\.pl' foo.log
+grep '^# *[cC]lear.*sys\.argv' bar.log
+grep '^wrapper args:.* -d .*baz' baz.log
+
+:
diff --git a/tests/remake-subdir-long-time.test
b/tests/remake-subdir-long-time.test
new file mode 100755
index 0000000..18ba732
--- /dev/null
+++ b/tests/remake-subdir-long-time.test
@@ -0,0 +1,116 @@
+#! /bin/sh
+# Copyright (C) 2011 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# Check that remake rules from subdirectories do not hang or cycle
+# endlessly, even with build systems that takes several seconds to
+# rebuild the Makefiles.
+# This test tries to ensure a long-enough rebuild time by introducing
+# an explicit delay in the build process.
+# Suggestion by Ralf Wildenhues.
+
+. ./defs || Exit 1
+
+set -e
+
+cat > configure.in <<END
+AC_INIT([$me], [1.0])
+AM_INIT_AUTOMAKE([foreign -Wall -Werror])
+AC_CONFIG_FILES([Makefile sub/Makefile])
+AC_SUBST([MAGIC], [magic])
+AC_OUTPUT
+END
+
+echo SUBDIRS = sub > Makefile.am
+mkdir sub
+: > sub/Makefile.am
+
+# Both aclocal and automake are expected to run one and just one time.
+# Create and use wrappers that will verify that.
+
+ocwd=`pwd` || fatal_ "cannot get current working directory"
+
+mkdir bin
+
+cat > bin/automake <<END
+#!/bin/sh
+set -e
+PATH='$PATH'; export PATH
+sentinel='$ocwd/automake-has-run'
+if test -f "\$sentinel"; then
+ echo "Automake has been run more than one time" >&2
+ exit 1
+else
+ echo automake has run > "\$sentinel"
+fi
+$sleep; $sleep;
+exec $AUTOMAKE \${1+"\$@"}
+END
+chmod a+x bin/automake
+
+cat > bin/aclocal <<END
+#!/bin/sh
+set -e
+PATH='$PATH'; export PATH
+sentinel='$ocwd/aclocal-has-run'
+if test -f "\$sentinel"; then
+ echo "Aclocal has been run more than one time" >&2
+ exit 1
+else
+ echo aclocal has run > "\$sentinel"
+fi
+$sleep; $sleep;
+exec $ACLOCAL \${1+"\$@"}
+END
+chmod a+x bin/aclocal
+
+# Just to be sure.
+cp bin/automake bin/automake-$APIVERSION
+cp bin/aclocal bin/aclocal-$APIVERSION
+
+PATH=$ocwd/bin$PATH_SEPARATOR$PATH; export PATH
+
+AUTOMAKE=automake ACLOCAL=aclocal; export AUTOMAKE ACLOCAL
+
+$ACLOCAL # Should use or just-defined wrapper.
+$AUTOMAKE # Likewise.
+$AUTOCONF
+
+# Sanity check: the wrappers have been used.
+test -f automake-has-run
+test -f aclocal-has-run
+rm -f automake-has-run aclocal-has-run
+
+./configure
+# Sanity check: Makefile doesn't get updated uselessly.
+ACLOCAL=false AUTOMAKE=false AUTOCONF=false $MAKE -e
+
+$sleep
+sed "s|magic|magic2|" configure.in > t
+mv -f t configure.in
+
+cd sub
+AUTOMAKE="$AUTOMAKE" ACLOCAL="$ACLOCAL" $MAKE -e Makefile
+cd ..
+
+# For debugging.
+ls -l . sub
+grep -i magic configure Makefile.in Makefile sub/Makefile.in sub/Makefile
+# Sanity checks.
+$FGREP magic2 configure
+$FGREP magic2 Makefile
+$FGREP magic2 sub/Makefile
+
+:
diff --git a/tests/specflg8.test b/tests/specflg8.test
index 1abcaa2..79daa15 100755
--- a/tests/specflg8.test
+++ b/tests/specflg8.test
@@ -1,5 +1,5 @@
#! /bin/sh
-# Copyright (C) 2002, 2004 Free Software Foundation, Inc.
+# Copyright (C) 2002, 2004, 2011 Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -34,25 +34,18 @@ END
# different flags.
cat > Makefile.am << 'END'
-FALSESOURCE = false.c
+TRUESOURCE = true.c
bin_PROGRAMS = false true
-true_SOURCES = $(FALSESOURCE)
-true_CPPFLAGS = -DAM_TRUE
-false_SOURCES = $(FALSESOURCE)
-false_CPPFLAGS = -DAM_FALSE
+true_SOURCES = $(TRUESOURCE)
+true_CPPFLAGS = -DEXIT_CODE=0
+false_SOURCES = $(TRUESOURCE)
+false_CPPFLAGS = -DEXIT_CODE=1
END
-cat > false.c << 'END'
-#include <stdio.h>
-int
-main (int argc, char *argv[])
+cat > true.c << 'END'
+int main (void)
{
-#ifdef AM_TRUE
- puts ("true");
-#else
- puts ("false");
-#endif
- return 0;
+ return EXIT_CODE;
}
END
@@ -62,5 +55,11 @@ $AUTOMAKE -a
./configure
$MAKE
-./true | grep true
-./false | grep false
+
+./true
+./false && Exit 1
+
+test -f ./true-true.o
+test -f ./true-true.o
+
+:
diff --git a/tests/check-tests_environment.test
b/tests/tests-environment-backcompat.test
similarity index 53%
copy from tests/check-tests_environment.test
copy to tests/tests-environment-backcompat.test
index a07ab95..ecf1b16 100755
--- a/tests/check-tests_environment.test
+++ b/tests/tests-environment-backcompat.test
@@ -14,26 +14,40 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
-# "Simple Tests" testsuite driver: check TESTS_ENVIRONMENT support.
+# With old serial testsuite driver, TESTS_ENVIRONMENT can be used to
+# define the "test runner", i.e. the program that the test scripts must
+# be run by (with the parallel-tests driver one should use LOG_COMPILER
+# for this). The behaviour tested here is also documented in the manual.
+parallel_tests=no
. ./defs || Exit 1
set -e
-cat >> configure.in << 'END'
+cat >> configure.in <<END
+AC_SUBST([PERL], ['$PERL'])
AC_OUTPUT
END
cat > Makefile.am << 'END'
-TESTS = foo.test
+TESTS_ENVIRONMENT = $(PERL) -Mstrict -w
+TESTS = foo.pl bar.pl baz.pl
+XFAIL_TESTS = baz.pl
EXTRA_DIST = $(TESTS)
END
-cat > foo.test << 'END'
-#! /bin/sh
-test x"$FOO" = x"ok"
+echo 'exit (0);' > foo.pl
+echo 'exit (0);' > bar.pl
+
+cat > baz.pl << 'END'
+# With "use strict" enacted, this will cause an error, since the
+# variable `$x' is not declared with `my' nor specified with an
+# explicit package name.
+$x = 0;
+exit ($x);
END
-chmod a+x foo.test
+
+chmod a+x *.pl
$ACLOCAL
$AUTOCONF
@@ -41,7 +55,7 @@ $AUTOMAKE -a
./configure
-FOO=bad TESTS_ENVIRONMENT='FOO=ok' $MAKE check
-FOO=ok TESTS_ENVIRONMENT='FOO=bad' $MAKE check && Exit 1
+$MAKE check
+$MAKE distcheck
:
diff --git a/tests/txinfo21.test b/tests/txinfo21.test
index 5644c0b..ae1d985 100755
--- a/tests/txinfo21.test
+++ b/tests/txinfo21.test
@@ -118,8 +118,8 @@ test ! -f rec/main3.html
# Make sure AM_MAKEINFOHTMLFLAGS is supported, and override AM_MAKEINFO.
cat >>Makefile.am <<\EOF
-AM_MAKEINFOHTMLFLAGS=--no-split
-AM_MAKEINFOFLAGS=--unsupported-option
+AM_MAKEINFOHTMLFLAGS = --no-headers --no-split
+AM_MAKEINFOFLAGS = --unsupported-option
EOF
$AUTOMAKE
./configure --prefix "`pwd`"
hooks/post-receive
--
GNU Automake
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Automake-commit] [SCM] GNU Automake branch, yacc-work, updated. v1.11-474-g94f3f89,
Stefano Lattarini <=