[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Automake-commit] [SCM] GNU Automake branch, master, updated. v1.12-117-
|
From: |
Stefano Lattarini |
|
Subject: |
[Automake-commit] [SCM] GNU Automake branch, master, updated. v1.12-117-gcb70240 |
|
Date: |
Sat, 19 May 2012 12:30:29 +0000 |
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "GNU Automake".
http://git.sv.gnu.org/gitweb/?p=automake.git;a=commitdiff;h=cb702406c1d494885b529f02010f9c6ec8b0ce36
The branch, master has been updated
via cb702406c1d494885b529f02010f9c6ec8b0ce36 (commit)
via f67dfa6e414c0cc0f6a807694aedba67923922d9 (commit)
via 91ac5d2cf4ad0f1b28776d06a713118a4b191a47 (commit)
via 5e771b27e52cda72b1bfde18ed7a4f118fad24e0 (commit)
via b6359a5f310160c8a4a2e8e8c0105408412ce400 (commit)
via 0ce63a38ab7c87502504ba7d2319886d4f4a7d15 (commit)
from 7b6129b9bb74773e1a02c5c43614f9fd47179369 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
commit cb702406c1d494885b529f02010f9c6ec8b0ce36
Merge: f67dfa6 5e771b2
Author: Stefano Lattarini <address@hidden>
Date: Sat May 19 14:13:39 2012 +0200
Merge branch 'parallel-tests-default'
* parallel-tests-default:
check: the parallel-tests driver is now the default
commit f67dfa6e414c0cc0f6a807694aedba67923922d9
Merge: 7b6129b 91ac5d2
Author: Stefano Lattarini <address@hidden>
Date: Sat May 19 14:09:55 2012 +0200
Merge branch 'maint'
* maint:
ylwrap: preserve subdirectories in "#line" munging
ylwrap: preparatory refactoring
commit 5e771b27e52cda72b1bfde18ed7a4f118fad24e0
Author: Stefano Lattarini <address@hidden>
Date: Fri May 18 18:00:51 2012 +0200
check: the parallel-tests driver is now the default
The old serial testsuite driver is still supported, and can be activated
by the 'serial-tests' option (introduced by commit 'v1.11-1989-gdeb7773'
of 2012-02-20, "automake: new option 'serial-tests'").
* lib/Automake/Options.pm: Now, the 'parallel-tests' option is a no-op
(but still explicitly recognized, for backward compatibility), while the
'serial-tests' option is recognized and registered.
* automake.in: Adjust to ensure that the parallel test harness is used by
default; mostly, this amounts at using "! option('serial-tests')" where
"option('parallel-tests')" was used before.
* NEWS, doc/automake.texi: Update.
* configure.ac (AM_INIT_AUTOMAKE): Drop 'parallel-tests' option, is
redundant now.
* defs: In the generated AM_INIT_AUTOMAKE call, use the 'serial-tests'
when the serial testsuite harness is to be used, and no option otherwise.
* lib/am/check.am: Use (static) conditional '%SERIAL_TESTS%' instead of
conditional '%PARALLEL_TESTS%'.
* lib/test-driver: Adjust heading comments.
* t/ax/extract-testsuite-summary.pl: Likewise.
* t/check-exported-srcdir.sh: Likewise.
* t/check-subst.sh: Likewise.
* t/java-compile-run-nested.sh: Likewise.
* t/parallel-tests-dry-run-1.sh: Likewise.
* t/parallel-tests-dry-run-2.sh: Likewise.
* t/parallel-tests-interrupt.sh: Likewise.
* t/parallel-tests-many.sh: Likewise.
* t/test-metadata-global-log.sh: Likewise.
* t/tests-environment-backcompat.sh: Likewise.
* m4/init.m4 (AM_INIT_AUTOMAKE): Adjust a comment.
* t/check8.sh: Likewise.
* t/check-tests-in-builddir.sh: Likewise.
* t/java-compile-run-flat.sh: Adjust a botched comment.
* t/ax/tap-summary-aux.sh: Remove explicit use of the 'parallel-tests'
option.
* t/ax/testsuite-summary-checks.sh: Likewise.
* t/aclocal-path-precedence.sh: Likewise.
* t/dist-aux-many-subdirs.sh: Likewise.
* t/parallel-tests-no-color-in-log.sh: Likewise.
* t/parallel-tests-reset-term.sh: Likewise.
* t/parallel-tests-subdir.sh: Likewise.
* t/check-no-test-driver.sh: Fix setup to adjust to the changed
semantics. Update heading comments.
* t/parallel-tests-driver-install.sh: Adjust to the new semantic.
* t/test-driver-is-distributed.sh: Simplified according to the
new semantics.
Signed-off-by: Stefano Lattarini <address@hidden>
-----------------------------------------------------------------------
Summary of changes:
NEWS | 16 +++++++
THANKS | 1 +
automake.in | 19 +++-----
configure.ac | 2 +-
defs | 4 +-
doc/automake.texi | 83 ++++++++++++++++------------------
lib/Automake/Options.pm | 11 +----
lib/am/check.am | 8 ++-
lib/test-driver | 4 +-
lib/ylwrap | 31 ++++++++-----
m4/init.m4 | 8 ++--
t/aclocal-path-precedence.sh | 2 +-
t/ax/extract-testsuite-summary.pl | 4 +-
t/ax/tap-summary-aux.sh | 2 +-
t/ax/testsuite-summary-checks.sh | 6 +-
t/check-exported-srcdir.sh | 2 +-
t/check-no-test-driver.sh | 8 ++-
t/check-subst.sh | 2 +-
t/check-tests-in-builddir.sh | 8 ++--
t/check8.sh | 2 +-
t/dist-auxdir-many-subdirs.sh | 2 +-
t/java-compile-run-flat.sh | 4 +-
t/java-compile-run-nested.sh | 10 ++--
t/lex-line.sh | 29 ++++++++----
t/parallel-tests-driver-install.sh | 47 ++------------------
t/parallel-tests-dry-run-1.sh | 2 +-
t/parallel-tests-dry-run-2.sh | 2 +-
t/parallel-tests-interrupt.tap | 2 +-
t/parallel-tests-many.sh | 4 +-
t/parallel-tests-no-color-in-log.sh | 2 +-
t/parallel-tests-reset-term.sh | 2 +-
t/parallel-tests-subdir.sh | 2 +-
t/tap-doc2.sh | 2 +-
t/test-driver-is-distributed.sh | 38 ++++++----------
t/test-metadata-global-log.sh | 2 +-
t/tests-environment-backcompat.sh | 2 +-
t/yacc-line.sh | 28 ++++++++---
37 files changed, 195 insertions(+), 208 deletions(-)
diff --git a/NEWS b/NEWS
index fcfbc6f..82e52ec 100644
--- a/NEWS
+++ b/NEWS
@@ -35,6 +35,13 @@ New in 1.13:
- All the "old alias" macros in 'm4/obsolete.m4' have been removed.
+* Changes to Automake-generated testsuite harnesses:
+
+ - The parallel testsuite harness (previously only enabled by the
+ 'parallel-tests' option) is the default one; the older serial
+ testsuite harness will still be available through the use of the
+ 'serial-tests' option (introduced in Automake 1.12).
+
* Silent rules support:
- Support for silent rules is now always active in Automake-generated
@@ -126,6 +133,15 @@ Bugs fixed in 1.12.1:
- Several inefficiencies and poor performances in the implementation
of the parallel-tests 'check' and 'recheck' targets have been fixed.
+ - The post-processing of output "#line" directives done the ylwrap
+ script is more faithful w.r.t. files in a subdirectory; for example,
+ if the processed file is "src/grammar.y", ylwrap will correctly
+ produce directives like:
+ #line 7 "src/grammar.y"
+ rather than like
+ #line 7 "grammar.y"
+ as it did before.
+
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
New in 1.12:
diff --git a/THANKS b/THANKS
index b98b2b7..0824c4f 100644
--- a/THANKS
+++ b/THANKS
@@ -269,6 +269,7 @@ Nicolas Joly address@hidden
Nicolas Thiery address@hidden
NightStrike address@hidden
Nik A. Melchior address@hidden
+Nikolai Weibull address@hidden
NISHIDA Keisuke address@hidden
Noah Friedman address@hidden
Norman Gray address@hidden
diff --git a/automake.in b/automake.in
index 2baaf61..22fbbd7 100644
--- a/automake.in
+++ b/automake.in
@@ -4767,9 +4767,7 @@ sub handle_tests_dejagnu
sub handle_per_suffix_test
{
my ($test_suffix, %transform) = @_;
- my ($pfx, $generic, $parallel_tests_option, $am_exeext);
- prog_error ("called with 'parallel-tests' option not set")
- unless $parallel_tests_option = option 'parallel-tests';
+ my ($pfx, $generic, $am_exeext);
if ($test_suffix eq '')
{
$pfx = '';
@@ -4786,13 +4784,12 @@ sub handle_per_suffix_test
: 'FALSE';
}
# The "test driver" program, deputed to handle tests protocol used by
- # test scripts. By default, it's assumed that no protocol is used,
- # so we fall back to the old "parallel-tests" behaviour, implemented
- # by the 'test-driver' auxiliary script.
+ # test scripts. By default, it's assumed that no protocol is used, so
+ # we fall back to the old behaviour, implemented by the 'test-driver'
+ # auxiliary script.
if (! var "${pfx}LOG_DRIVER")
{
- require_conf_file ($parallel_tests_option->{position}, FOREIGN,
- 'test-driver');
+ require_conf_file ("parallel-tests", FOREIGN, 'test-driver');
define_variable ("${pfx}LOG_DRIVER",
"\$(SHELL) $am_config_aux_dir/test-driver",
INTERNAL);
@@ -4852,7 +4849,7 @@ sub handle_tests
my $check_deps = "@check";
$output_rules .= &file_contents ('check', new Automake::Location,
COLOR => !! option 'color-tests',
- PARALLEL_TESTS => !! option
'parallel-tests',
+ SERIAL_TESTS => !! option 'serial-tests',
CHECK_DEPS => $check_deps);
# Tests that are known programs should have $(EXEEXT) appended.
@@ -4861,7 +4858,7 @@ sub handle_tests
append_exeext { exists $known_programs{$_[0]} } 'XFAIL_TESTS'
if (var ('XFAIL_TESTS'));
- if (my $parallel_tests = option 'parallel-tests')
+ if (! option 'serial-tests')
{
define_variable ('TEST_SUITE_LOG', 'test-suite.log', INTERNAL);
my $suff = '.test';
@@ -4911,7 +4908,7 @@ sub handle_tests
if ($val =~ /(\$\((top_)?srcdir\))\//o)
{
msg ('error', $subvar->rdef ($cond)->location,
- "parallel-tests: using '$1' in TESTS is currently
broken: '$val'");
+ "using '$1' in TESTS is currently broken: '$val'");
}
foreach my $test_suffix (@test_suffixes)
diff --git a/configure.ac b/configure.ac
index ec38426..ad34d15 100644
--- a/configure.ac
+++ b/configure.ac
@@ -40,7 +40,7 @@ dnl We call AC_PROG_CC in an unusual way, and only for use in
our
dnl testsuite, so also use 'no-dependencies' and 'no-define' among
dnl the automake options to avoid bloating and potential problems.
AM_INIT_AUTOMAKE([dist-xz filename-length-max=99 color-tests
- parallel-tests no-define no-dependencies])
+ no-define no-dependencies])
## Keep this on a line of its own, since it must be found and processed
## by the 'update-copyright' rule in our Makefile.
diff --git a/defs b/defs
index 24d3fd2..181ce5c 100644
--- a/defs
+++ b/defs
@@ -1088,9 +1088,9 @@ else
{
echo "AC_INIT([$me], [1.0])"
if test x"$am_serial_tests" = x"yes"; then
- echo "AM_INIT_AUTOMAKE"
+ echo "AM_INIT_AUTOMAKE([serial-tests])"
else
- echo "AM_INIT_AUTOMAKE([parallel-tests])"
+ echo "AM_INIT_AUTOMAKE"
fi
echo "AC_CONFIG_FILES([Makefile])"
} >configure.ac || framework_failure_ "creating configure.ac skeleton"
diff --git a/doc/automake.texi b/doc/automake.texi
index 5928291..ea0f3e6 100644
--- a/doc/automake.texi
+++ b/doc/automake.texi
@@ -8744,21 +8744,20 @@ also data files to be passed to one or more test
scripts defined by
different means (the so-called ``log compilers'', @pxref{Parallel Test
Harness}).
-Test scripts can be executed serially or concurrently. Automake
-supports both these kinds of test execution, with the serial test harness
-being the default (for backward-compatibility reasons only, as its use
-is nowadays discouraged). The concurrent test harness relies on the
-concurrence capabilities (if any) offered by the underlying @command{make}
+Test scripts can be executed serially or concurrently. Automake supports
+both these kinds of test execution, with the parallel test harness being
+the default. The concurrent test harness relies on the concurrence
+capabilities (if any) offered by the underlying @command{make}
implementation, and can thus only be as good as those are.
By default, only the exit statuses of the test scripts are considered when
determining the testsuite outcome. But Automake allows also the use of
more complex test protocols, either standard (@pxref{Using the TAP test
-protocol}) or custom (@pxref{Custom Test Drivers}). Note that you can
-enable such protocols only when the parallel harness is used: they won't
-work with the serial test harness. In the rest of this section we are
-going to concentrate mostly on protocol-less tests, since we cover
-test protocols in a later section (again, @pxref{Custom Test Drivers}).
+protocol}) or custom (@pxref{Custom Test Drivers}). Note that you can't
+enable such protocols when the serial harness is used, though.
+In the rest of this section we are going to concentrate mostly on
+protocol-less tests, since we cover test protocols in a later section
+(again, @pxref{Custom Test Drivers}).
@cindex Exit status 77, special interpretation
@cindex Exit status 99, special interpretation
@@ -8904,14 +8903,12 @@ by the tests, not the tests themselves. Of course you
can set
@code{TESTS = $(check_PROGRAMS)} if all your programs are test cases.
@node Serial Test Harness
address@hidden Serial Test Harness
address@hidden Older (and obsolescent) serial test harness
@cindex @option{serial-tests}, Using
address@hidden:} This harness, while still being the default one, is
-obsolescent, and kept mostly for backward-compatibility reasons. The user
-is advised to use the parallel test harness instead (@pxref{Parallel Test
-Harness}). Be warned that future Automake versions might switch to use
-that more modern and feature-rich harness by default.
address@hidden harness is obsolescent}, and kept for backward-compatibility
+reasons only. The user is strongly advised to just use the parallel test
+harness instead (@pxref{Parallel Test Harness}).
The serial test harness is enabled by the Automake option
@option{serial-tests}. It operates by simply running the tests serially,
@@ -8946,14 +8943,12 @@ versions.
@node Parallel Test Harness
@subsection Parallel Test Harness
address@hidden @option{parallel-tests}, Using
-The parallel (or concurrent) test harness is enabled by the Automake option
address@hidden It features automatic collection of the test
-scripts output in @file{.log} files, concurrent execution of tests with
address@hidden -j}, specification of inter-test dependencies, lazy reruns of
-tests that have not completed in a prior run, and hard errors for exceptional
-failures.
+By default, Automake generated a parallel (concurrent) test harness. It
+features automatic collection of the test scripts output in @file{.log}
+files, concurrent execution of tests with @code{make -j}, specification
+of inter-test dependencies, lazy reruns of tests that have not completed
+in a prior run, and hard errors for exceptional failures.
This harness is still somewhat experimental and may undergo changes in
order to satisfy additional portability requirements.
@@ -9321,11 +9316,10 @@ with the parallel test harness and its default driver.
@subsubsection Command-line arguments for test drivers
A custom driver can rely on various command-line options and arguments
-being passed to it automatically by the Automake's @option{parallel-tests}
-harness. It is @emph{mandatory} that it understands all of them (even
-if the exact interpretation of the associated semantics can legitimately
-change between a test driver and another, and even be a no-op in some
-drivers).
+being passed to it automatically by the Automake-generated test harness.
+It is @emph{mandatory} that it understands all of them (even if the exact
+interpretation of the associated semantics can legitimately change
+between a test driver and another, and even be a no-op in some drivers).
@noindent
Here is the list of options:
@@ -9369,9 +9363,9 @@ for this program.
Note that the exact semantics attached to the @option{--color-tests},
@option{--expect-failure} and @option{--enable-hard-errors} options are
left up to the individual test drivers. Still, having a behaviour
-compatible or at least similar to that provided by the default
address@hidden driver is advised, as that would offer a better
-consistency and a more pleasant user experience.
+compatible or at least similar to that provided by the default driver
+is advised, as that would offer a better consistency and a more pleasant
+user experience.
@node Log files generation and test results recording
@subsubsection Log files generation and test results recording
@@ -9413,8 +9407,8 @@ The only recognized test results are currently
@code{PASS}, @code{XFAIL},
@code{SKIP}, @code{FAIL}, @code{XPASS} and @code{ERROR}. These results,
when declared with @code{:test-result:}, can be optionally followed by
text holding the name and/or a brief description of the corresponding
-test; the @option{parallel-tests} harness will ignore such extra text when
-generating @file{test-suite.log} and preparing the testsuite summary.
+test; the harness will ignore such extra text when generating
address@hidden and preparing the testsuite summary.
@c Keep in sync with 'test-metadata-recheck.test'.
@item @code{:recheck:}
@@ -9522,7 +9516,7 @@ on standard output; a test harness (also called ``TAP
consumer'') will
parse and interpret these results, and properly present them to the user,
and/or register them for later analysis. The exact details of how this
is accomplished can vary among different test harnesses. The Automake
-parallel harness will present the results on the console in the usual
+harness will present the results on the console in the usual
fashion (@pxref{Testsuite progress on console}), and will use the
@file{.trs} files (@pxref{Basics of test metadata}) to store the test
results and related metadata. Apart from that, it will try to remain
@@ -9606,7 +9600,7 @@ Here is an example of how the TAP driver can be set up
and used.
% @kbd{cat configure.ac}
AC_INIT([GNU Try Tap], [1.0], [bug-automake@@gnu.org])
AC_CONFIG_AUX_DIR([build-aux])
-AM_INIT_AUTOMAKE([foreign parallel-tests -Wall -Werror])
+AM_INIT_AUTOMAKE([foreign -Wall -Werror])
AC_CONFIG_FILES([Makefile])
AC_REQUIRE_AUX_FILE([tap-driver.sh])
AC_PROG_AWK
@@ -9687,7 +9681,7 @@ mainstream versions, which you should be aware of.
A @code{Bail out!} directive doesn't stop the whole testsuite, but only
the test script it occurs in. This doesn't follow TAP specifications,
but on the other hand it maximizes compatibility (and code sharing) with
-the ``hard error'' concept of the default @option{parallel-tests} driver.
+the ``hard error'' concept of the default testsuite driver.
@item
The @code{version} and @code{pragma} directives are not supported.
@item
@@ -10106,18 +10100,19 @@ are ordinarily automatically provided by Automake.
Don't require @file{texinfo.tex}, even if there are texinfo files in
this directory.
address@hidden @option{parallel-tests}
address@hidden Option, @option{parallel-tests}
address@hidden parallel-tests
-Enable test suite harness for @code{TESTS} that can run tests in parallel
-(@pxref{Parallel Test Harness}, for more information).
-
@item @option{serial-tests}
@cindex Option, @option{serial-tests}
@opindex serial-tests
Enable the older serial test suite harness for @code{TESTS} (@pxref{Serial
-Test Harness}, for more information). This is still the default for the
-moment.
+Test Harness}, for more information).
+
address@hidden @option{parallel-tests}
address@hidden Option, @option{parallel-tests}
address@hidden parallel-tests
+Enable test suite harness for @code{TESTS} that can run tests in parallel
+(@pxref{Parallel Test Harness}, for more information). This option is
+only kept for backward-compatibility, since the parallel test harness is
+the default now.
@item @option{readme-alpha}
@cindex Option, @option{readme-alpha}
diff --git a/lib/Automake/Options.pm b/lib/Automake/Options.pm
index 231600b..186d4ca 100644
--- a/lib/Automake/Options.pm
+++ b/lib/Automake/Options.pm
@@ -286,6 +286,8 @@ sub _is_valid_easy_option ($)
no-texinfo.tex
nostdinc
readme-alpha
+ serial-tests
+ parallel-tests
silent-rules
std-options
subdir-objects
@@ -328,15 +330,6 @@ sub _process_option_list (\%@)
error ($where, "support for lzma-compressed distribution " .
"archives has been removed");
}
- elsif ($_ eq 'parallel-tests')
- {
- # Just recognize it explicitly.
- }
- elsif ($_ eq 'serial-tests')
- {
- # This is a little of an hack, but good enough for the moment.
- delete $options->{'parallel-tests'};
- }
elsif (/^filename-length-max=(\d+)$/)
{
delete $options->{$_};
diff --git a/lib/am/check.am b/lib/am/check.am
index 9cda82a..67b254f 100644
--- a/lib/am/check.am
+++ b/lib/am/check.am
@@ -46,7 +46,7 @@ endif !%?COLOR%
.PHONY: check-TESTS
-if %?PARALLEL_TESTS%
+if !%?SERIAL_TESTS%
include inst-vars.am
@@ -452,7 +452,9 @@ AM_RECURSIVE_TARGETS += check recheck
.PHONY: recheck
-else !%?PARALLEL_TESTS%
+else %?SERIAL_TESTS%
+
+## Obsolescent serial testsuite driver.
check-TESTS: $(TESTS)
@failed=0; all=0; xfail=0; xpass=0; skip=0; \
@@ -558,4 +560,4 @@ check-TESTS: $(TESTS)
test "$$failed" -eq 0; \
else :; fi
-endif !%?PARALLEL_TESTS%
+endif %?SERIAL_TESTS%
diff --git a/lib/test-driver b/lib/test-driver
index 2398a06..e70a930 100755
--- a/lib/test-driver
+++ b/lib/test-driver
@@ -1,7 +1,7 @@
#! /bin/sh
-# test-driver - basic driver script for the `parallel-tests' mode.
+# test-driver - basic testsuite driver script.
-scriptversion=2011-08-17.14; # UTC
+scriptversion=2012-05-18.16; # UTC
# Copyright (C) 2011-2012 Free Software Foundation, Inc.
#
diff --git a/lib/ylwrap b/lib/ylwrap
index 36543da..6879d8d 100755
--- a/lib/ylwrap
+++ b/lib/ylwrap
@@ -62,10 +62,25 @@ EOF
;;
esac
+get_dirname ()
+{
+ case $1 in
+ */*|*\\*) printf '%s\n' "$1" | sed -e 's,\([\\/]\)[^\\/]*$,\1,';;
+ # Otherwise, we want the empty string (not ".").
+ esac
+}
+
+quote_for_sed ()
+{
+ # FIXME: really we should care about more than '.' and '\'.
+ sed -e 's,[\\.],\\&,g'
+}
# The input.
input="$1"
shift
+# We'll later need for a correct munging of "#line" directives.
+input_sub_rx=`get_dirname "$input" | quote_for_sed`
case "$input" in
[\\/]* | ?:[\\/]*)
# Absolute path; do nothing.
@@ -125,11 +140,7 @@ if test $ret -eq 0; then
y_tab_nodot="yes"
fi
- # The directory holding the input.
- input_dir=`echo "$input" | sed -e 's,\([\\/]\)[^\\/]*$,\1,'`
- # Quote $INPUT_DIR so we can use it in a regexp.
- # FIXME: really we should care about more than '.' and '\'.
- input_rx=`echo "$input_dir" | sed 's,\\\\,\\\\\\\\,g;s,\\.,\\\\.,g'`
+ input_rx=`get_dirname "$input" | quote_for_sed`
while test "$#" -ne 0; do
from="$1"
@@ -161,15 +172,11 @@ if test $ret -eq 0; then
realtarget="$target"
target="tmp-`echo $target | sed s/.*[\\/]//g`"
fi
- # Edit out '#line' or '#' directives.
- #
+ # Munge "#line" or "#" directives.
# We don't want the resulting debug information to point at
- # an absolute srcdir; it is better for it to just mention the
- # .y file with no path.
- #
+ # an absolute srcdir.
# We want to use the real output file name, not yy.lex.c for
# instance.
- #
# We want the include guards to be adjusted too.
FROM=`echo "$from" | sed \
-e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'\
@@ -178,7 +185,7 @@ if test $ret -eq 0; then
-e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'\
-e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'`
- sed -e "/^#/!b" -e "s,$input_rx,," -e "s,$from,$2," \
+ sed -e "/^#/!b" -e "s,$input_rx,$input_sub_rx," -e "s,$from,$2," \
-e "s,$FROM,$TARGET," "$from" >"$target" || ret=$?
# Check whether header files must be updated.
diff --git a/m4/init.m4 b/m4/init.m4
index 0a6eefc..221aacf 100644
--- a/m4/init.m4
+++ b/m4/init.m4
@@ -6,7 +6,7 @@
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 20
+# serial 21
# This macro actually does too much. Some checks are only needed if
# your package does certain things. But this isn't really a big deal.
@@ -109,9 +109,9 @@ AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
])
AC_REQUIRE([AM_SILENT_RULES])dnl
-dnl The 'parallel-tests' driver may need to know about EXEEXT, so add the
-dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro
-dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
+dnl The testsuite driver may need to know about EXEEXT, so add the
+dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This
+dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
AC_CONFIG_COMMANDS_PRE(dnl
[m4_provide_if([_AM_COMPILER_EXEEXT],
[AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
diff --git a/t/aclocal-path-precedence.sh b/t/aclocal-path-precedence.sh
index 91d9a42..d831cea 100755
--- a/t/aclocal-path-precedence.sh
+++ b/t/aclocal-path-precedence.sh
@@ -21,7 +21,7 @@ am_create_testdir=empty
cat > configure.ac << 'END'
AC_INIT([foo], [1.0])
-AM_INIT_AUTOMAKE([parallel-tests])
+AM_INIT_AUTOMAKE
FOO_MACRO
BAR_MACRO
AC_PROG_LIBTOOL
diff --git a/t/ax/extract-testsuite-summary.pl
b/t/ax/extract-testsuite-summary.pl
index 28a9c35..a8b6343 100644
--- a/t/ax/extract-testsuite-summary.pl
+++ b/t/ax/extract-testsuite-summary.pl
@@ -1,6 +1,6 @@
#! /usr/bin/env perl
-# Extract the testsuite summary generated by the parallel-tests harness
-# from the output of "make check".
+# Extract the testsuite summary generated by the parallel testsuite
+# harness from the output of "make check".
# Copyright (C) 2012 Free Software Foundation, Inc.
diff --git a/t/ax/tap-summary-aux.sh b/t/ax/tap-summary-aux.sh
index f5d1fbd..fcdcf53 100644
--- a/t/ax/tap-summary-aux.sh
+++ b/t/ax/tap-summary-aux.sh
@@ -29,7 +29,7 @@ fetch_tap_driver
cat > configure.ac <<END
AC_INIT([GNU AutoTAP], [5.12], address@hidden)
-AM_INIT_AUTOMAKE([parallel-tests])
+AM_INIT_AUTOMAKE
AC_CONFIG_FILES([Makefile])
AC_OUTPUT
END
diff --git a/t/ax/testsuite-summary-checks.sh b/t/ax/testsuite-summary-checks.sh
index 0c8e98c..673fbcb 100644
--- a/t/ax/testsuite-summary-checks.sh
+++ b/t/ax/testsuite-summary-checks.sh
@@ -14,7 +14,7 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
-# Check the testsuite summary with the parallel-tests harness. This
+# Check the testsuite summary with the parallel test harness. This
# script is meant to be sourced by other test script, so that it can
# be used to check different scenarios (colorized and non-colorized
# testsuite output, packages with and without bug-report addresses,
@@ -28,10 +28,10 @@ case $use_colors in
# Forced colorization should take place also with non-ANSI
# terminals; hence this setting.
TERM=dumb; export TERM
- am_opts='parallel-tests color-tests'
+ am_opts='color-tests'
;;
no)
- am_opts='parallel-tests'
+ am_opts=''
;;
*)
fatal_ "invalid use_colors='$use_colors'";;
diff --git a/t/check-exported-srcdir.sh b/t/check-exported-srcdir.sh
index c6fda21..25a4722 100755
--- a/t/check-exported-srcdir.sh
+++ b/t/check-exported-srcdir.sh
@@ -15,7 +15,7 @@
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# Check that the testsuite driver (either with or without the
-# parallel-tests option enabled) exports the 'srcdir' value in the
+# serial-tests option enabled) exports the 'srcdir' value in the
# environment of the tests. This is documented in the manual.
# For gen-testsuite-part: ==> try-with-serial-tests <==
diff --git a/t/check-no-test-driver.sh b/t/check-no-test-driver.sh
index 84ea325..f86b4da 100755
--- a/t/check-no-test-driver.sh
+++ b/t/check-no-test-driver.sh
@@ -15,13 +15,15 @@
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# Check that auxiliary script 'test-driver' doesn't get needlessly
-# installed or referenced when the 'parallel-tests' option is not
-# used.
+# installed or referenced when the 'serial-tests' option is used.
am_serial_tests=yes
. ./defs || Exit 1
-echo 'TESTS = foo.test' > Makefile.am
+cat > Makefile.am <<'END'
+AUTOMAKE_OPTIONS = serial-tests
+TESTS = foo.test
+END
$ACLOCAL
diff --git a/t/check-subst.sh b/t/check-subst.sh
index ac8fe89..3cc2bc4 100755
--- a/t/check-subst.sh
+++ b/t/check-subst.sh
@@ -16,7 +16,7 @@
# Check @substituted@ TESTS.
# Note that in this test, we rely on the .test extension for the
-# substituted names: this is necessary for parallel-tests.
+# substituted names: this is necessary for the parallel harness.
# See also sister test 'check-subst-prog.test'.
# For gen-testsuite-part: ==> try-with-serial-tests <==
diff --git a/t/check-tests-in-builddir.sh b/t/check-tests-in-builddir.sh
index 323c3bc..5b3cb22 100755
--- a/t/check-tests-in-builddir.sh
+++ b/t/check-tests-in-builddir.sh
@@ -54,8 +54,8 @@ chmod a+x bar.test
$MAKE check >out 2>&1 || { cat out; Exit1; }
cat out
-# The simple-tests driver does not strip VPATH components from
-# the name of the test, but the parallel-tests driver should.
+# The serial test driver does not strip VPATH components from
+# the name of the test, but the parallel driver should.
if test x"$am_serial_tests" = x"yes"; then
grep '^PASS: .*foo\.test *$' out
else
@@ -68,8 +68,8 @@ rm -f test-suite.log foo.log bar.log
FOO_EXIT_STATUS=1 $MAKE check >out 2>&1 && { cat out; Exit1; }
cat out
-# The simple-tests driver does not strip VPATH components from
-# the name of the test, but the parallel-tests driver should.
+# The serial test driver does not strip VPATH components from
+# the name of the test, but the parallel driver should.
if test x"$am_serial_tests" = x"yes"; then
grep '^FAIL: .*foo\.test *$' out
else
diff --git a/t/check8.sh b/t/check8.sh
index d33c002..4db8e86 100755
--- a/t/check8.sh
+++ b/t/check8.sh
@@ -75,7 +75,7 @@ grep '^[^X]*PASS.* bar' stdout
grep '^[^X]*PASS.* sub/bar' stdout
grep '^[^X]*FAIL.* baz' stdout
grep 'XFAIL.* sub/baz' stdout
-# 'parallel-tests' should not add circular dependencies.
+# The parallel test driver should cause circular dependencies.
# Look for known warnings from a couple of 'make' implementations.
grep -i 'circular.*dependency' stderr && Exit 1
grep -i 'graph cycles' stderr && Exit 1
diff --git a/t/dist-auxdir-many-subdirs.sh b/t/dist-auxdir-many-subdirs.sh
index f84514a..39eb373 100755
--- a/t/dist-auxdir-many-subdirs.sh
+++ b/t/dist-auxdir-many-subdirs.sh
@@ -41,7 +41,7 @@ do_check ()
unindent > configure.ac << END
AC_INIT([$me], [$count])
AC_CONFIG_AUX_DIR([$auxdir])
- AM_INIT_AUTOMAKE([parallel-tests])
+ AM_INIT_AUTOMAKE
AC_PROG_CC
# We don't want to require python or emcas in this test, so
# the tricks below.
diff --git a/t/java-compile-run-flat.sh b/t/java-compile-run-flat.sh
index 9f3c184..3a8fcad 100755
--- a/t/java-compile-run-flat.sh
+++ b/t/java-compile-run-flat.sh
@@ -20,8 +20,8 @@
# This test uses a "flat" setup for the source tree (i.e., everything in
# the top-level directory), and forces the use of the old, non-parallel
# testsuite driver. The sister test 'java-compile-run-nested.test' do
-# similar checks with a more usual, "nested" setup, and using the newer
-# 'parallel-tests' driver.
+# similar checks with a more usual, "nested" setup, and using the older
+# 'serial-tests' driver.
required='java javac'
am_serial_tests=yes
diff --git a/t/java-compile-run-nested.sh b/t/java-compile-run-nested.sh
index 61727f7..ece2d1c 100755
--- a/t/java-compile-run-nested.sh
+++ b/t/java-compile-run-nested.sh
@@ -18,11 +18,11 @@
# Also meddle with wrapper scripts, as would be probably seen in a real
# "UNIX-style" use case.
# This test uses a typical "nested" source tree setup (i.e., different
-# components/aspects are separated into different subdirectories),
-# and uses the 'parallel-tests' testsuite driver. The sister test
-# 'java-compile-run-flat.test' do similar checks with a "flat" setup
-# (i.e., everything in the top-level directory), and forcing the use
-# of the older non-parallel 'simple-tests' driver.
+# components/aspects are separated into different subdirectories), and
+# uses the parallel testsuite driver.
+# The sister test 'java-compile-run-flat.test' do similar checks with a
+# "flat" setup (i.e., everything in the top-level directory), and forcing
+# the use of the older 'serial-tests' driver.
required='java javac'
. ./defs || Exit 1
diff --git a/t/lex-line.sh b/t/lex-line.sh
index f690e7e..a95faf3 100755
--- a/t/lex-line.sh
+++ b/t/lex-line.sh
@@ -104,18 +104,29 @@ for vpath in : false; do
# For debugging,
ls -l . sub sub/dir
- $FGREP '.l' $c_outputs
+ $EGREP 'line|\.l' $c_outputs
- # Adjusted "#line" should not contain reference to the builddir.
- $EGREP '#.*line.*(build|\.\.).*\.l' $c_outputs && Exit 1
+ grep '#.*line.*build.*\.l' $c_outputs && Exit 1
+ # Adjusted "#line" should not contain reference to the absolute
+ # srcdir.
+ $EGREP '#.*line *"?/.*\.l' $c_outputs && Exit 1
# Adjusted "#line" should not contain reference to the default
# output file names, e.g., 'lex.yy.c'.
- $EGREP '#.*line.*lex\.yy' $c_outputs && Exit 1
- # Don't be excessively strict in grepping, to avoid spurious failures.
- grep '#.*line.*zardoz\.l' zardoz.c
- grep '#.*line.*quux\.l' bar-quux.c
- grep '#.*line.*zardoz\.l' sub/foo-zardoz.c
- grep '#.*line.*quux\.l' sub/dir/quux.c
+ grep '#.*line.*lex\.yy' $c_outputs && Exit 1
+ # Look out for a silly regression.
+ grep "#.*\.l.*\.l" $c_outputs && Exit 1
+ if $vpath; then
+ grep '#.*line.*"\.\./zardoz\.l"' zardoz.c
+ grep '#.*line.*"\.\./dir/quux\.l"' bar-quux.c
+ grep '#.*line.*"\.\./\.\./sub/zardoz\.l"' sub/foo-zardoz.c
+ grep '#.*line.*"\.\./\.\./sub/dir/quux\.l"' sub/dir/quux.c
+ else
+ grep '#.*line.*"zardoz\.l"' zardoz.c
+ grep '#.*line.*"dir/quux\.l"' bar-quux.c
+ grep '#.*line.*"zardoz\.l"' sub/foo-zardoz.c
+ grep '#.*line.*"dir/quux\.l"' sub/dir/quux.c
+ fi
+
cd $srcdir
done
diff --git a/t/parallel-tests-driver-install.sh
b/t/parallel-tests-driver-install.sh
index fcfa38d..a04e9b1 100755
--- a/t/parallel-tests-driver-install.sh
+++ b/t/parallel-tests-driver-install.sh
@@ -15,19 +15,15 @@
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# Check that auxiliary script 'test-driver' gets automatically installed
-# in the correct directory by 'parallel-tests' option.
+# in the correct directory.
+am_create_testdir=empty
. ./defs || Exit 1
-: Try first with parallel-tests defined in AM_INIT_AUTOMAKE.
-
-mkdir am-init-automake
-cd am-init-automake
-
cat > configure.ac <<END
AC_INIT([$me], [1.0])
AC_CONFIG_AUX_DIR([my_aux_dir])
-AM_INIT_AUTOMAKE([parallel-tests])
+AM_INIT_AUTOMAKE
AC_CONFIG_FILES([Makefile sub/Makefile])
AC_OUTPUT
END
@@ -52,41 +48,6 @@ test -f my_aux_dir/test-driver
test ! -r test-driver
test ! -r sub/test-driver
-grep '^configure\.ac:3:.*installing.*my_aux_dir/test-driver' stderr
-
-cd ..
-
-: Now try with parallel-tests defined in AUTOMAKE_OPTIONS.
-
-mkdir automake-options
-cd automake-options
-
-cat > configure.ac <<END
-AC_INIT([$me], [1.0])
-AC_CONFIG_AUX_DIR([build-aux])
-AM_INIT_AUTOMAKE
-AC_CONFIG_FILES([dir/GNUmakefile])
-AC_OUTPUT
-END
-
-mkdir build-aux dir
-
-cat > dir/GNUmakefile.am <<END
-TESTS = foo.test
-AUTOMAKE_OPTIONS = parallel-tests
-TESTS += bar.test
-END
-
-$ACLOCAL
-$AUTOMAKE --add-missing --copy dir/GNUmakefile 2>stderr \
- || { cat stderr >&2; Exit 1; }
-cat stderr >&2
-
-ls -l . dir build-aux # For debugging.
-test -f build-aux/test-driver
-test ! -r test-driver
-test ! -r dir/test-driver
-
-grep '^dir/GNUmakefile\.am:2:.*installing.*build-aux/test-driver' stderr
+grep '^parallel-tests:.*installing.*my_aux_dir/test-driver' stderr
:
diff --git a/t/parallel-tests-dry-run-1.sh b/t/parallel-tests-dry-run-1.sh
index 6fdcb98..f5496e3 100755
--- a/t/parallel-tests-dry-run-1.sh
+++ b/t/parallel-tests-dry-run-1.sh
@@ -14,7 +14,7 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
-# Check parallel-tests interactions with "make -n".
+# Check interactions between the parallel test harness and "make -n".
# See also sister test 'parallel-tests-dry-run-2.test'.
. ./defs || Exit 1
diff --git a/t/parallel-tests-dry-run-2.sh b/t/parallel-tests-dry-run-2.sh
index 20ccb5d..f3ce42e 100755
--- a/t/parallel-tests-dry-run-2.sh
+++ b/t/parallel-tests-dry-run-2.sh
@@ -14,7 +14,7 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
-# Check parallel-tests interactions with "make -n".
+# Check interactions between the parallel test harness and "make -n".
# See also sister test 'parallel-tests-dry-run-1.test'.
. ./defs || Exit 1
diff --git a/t/parallel-tests-interrupt.tap b/t/parallel-tests-interrupt.tap
index afc1956..08f9031 100755
--- a/t/parallel-tests-interrupt.tap
+++ b/t/parallel-tests-interrupt.tap
@@ -14,7 +14,7 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
-# Check that the parallel-tests driver removed incomplete log files
+# Check that the parallel testsuite harness removes incomplete log files
# when interrupt upon some signal. This test is definitely too hacky,
# but we couldn't find a better way to deal with inter-processes
# signals and the whole process-synchronization mess.
diff --git a/t/parallel-tests-many.sh b/t/parallel-tests-many.sh
index 65db6e6..d4f6c7f 100755
--- a/t/parallel-tests-many.sh
+++ b/t/parallel-tests-many.sh
@@ -14,8 +14,8 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
-# Check that the parallel-tests harness does not hit errors due to
-# an exceeded command line length when there are many tests.
+# Check that the parallel testsuite harness does not hit errors due
+# to an exceeded command line length when there are many tests.
# For automake bug#7868. This test is currently expected to fail.
. ./defs || Exit 1
diff --git a/t/parallel-tests-no-color-in-log.sh
b/t/parallel-tests-no-color-in-log.sh
index 69414f7..16c0ed7 100755
--- a/t/parallel-tests-no-color-in-log.sh
+++ b/t/parallel-tests-no-color-in-log.sh
@@ -37,7 +37,7 @@ END
cat >Makefile.am <<'END'
LOG_COMPILER = $(SHELL)
-AUTOMAKE_OPTIONS = color-tests parallel-tests
+AUTOMAKE_OPTIONS = color-tests
TESTS = pass fail skip xpass xfail error
XFAIL_TESTS = xpass xfail
END
diff --git a/t/parallel-tests-reset-term.sh b/t/parallel-tests-reset-term.sh
index cf9fb6c..4cd8086 100755
--- a/t/parallel-tests-reset-term.sh
+++ b/t/parallel-tests-reset-term.sh
@@ -14,7 +14,7 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
-# Check that the parallel-tests driver correctly handle overrides of the
+# Check that the testsuite harness correctly handle overrides of the
# TERM variable by either TESTS_ENVIRONMENT and AM_TESTS_ENVIRONMENT.
. ./defs || Exit 1
diff --git a/t/parallel-tests-subdir.sh b/t/parallel-tests-subdir.sh
index 2698a53..336fcd8 100755
--- a/t/parallel-tests-subdir.sh
+++ b/t/parallel-tests-subdir.sh
@@ -14,7 +14,7 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
-# Check that the parallel-tests driver creates parent directories for
+# Check that the parallel test harness creates parent directories for
# the log files when needed.
. ./defs || Exit 1
diff --git a/t/tap-doc2.sh b/t/tap-doc2.sh
index 0607112..b1ea8b9 100755
--- a/t/tap-doc2.sh
+++ b/t/tap-doc2.sh
@@ -31,7 +31,7 @@ END
cat > configure.ac <<'END'
AC_INIT([GNU Try Tap], [1.0], address@hidden)
AC_CONFIG_AUX_DIR([build-aux])
-AM_INIT_AUTOMAKE([foreign parallel-tests -Wall -Werror])
+AM_INIT_AUTOMAKE([foreign -Wall -Werror])
AC_CONFIG_FILES([Makefile])
AC_REQUIRE_AUX_FILE([tap-driver.sh])
AC_PROG_AWK
diff --git a/t/test-driver-is-distributed.sh b/t/test-driver-is-distributed.sh
index 9b2f08b..88f7982 100755
--- a/t/test-driver-is-distributed.sh
+++ b/t/test-driver-is-distributed.sh
@@ -23,31 +23,25 @@ am_create_testdir=empty
ocwd=`pwd` || fatal_ "getting current working directory"
-do_check ()
-{
- whereopts=$1 auxdir=$2
- case $#,$whereopts in
- 2,ac) ac_opts=parallel-tests am_code= ;;
- 2,am) am_opts=parallel-tests ac_code= ;;
- *) fatal_ "do_check: bad usage";;
- esac
- mkdir $whereopts
- cd $whereopts
+for i in 1 2; do
+ mkdir D$i
+ cd D$i
+ if test $i -eq 1; then
+ auxdir=.
+ test_driver=test-driver
+ else
+ auxdir=build-aux
+ test_driver=$auxdir/test-driver
+ mkdir $auxdir
+ fi
mkdir tests
unindent > configure.ac << END
AC_INIT([$me], [1.0])
AC_CONFIG_AUX_DIR([$auxdir])
- AM_INIT_AUTOMAKE([$ac_opts])
+ AM_INIT_AUTOMAKE
AC_CONFIG_FILES([Makefile tests/Makefile])
AC_OUTPUT
END
- if test $auxdir = .; then
- test_driver=test-driver
- else
- mkdir $auxdir
- test_driver=$auxdir/test-driver
- fi
- # No 'AUTOMAKE_OPTIONS' in here -- purposely.
unindent > Makefile.am << END
SUBDIRS = tests
check-local: test-top
@@ -57,7 +51,6 @@ END
.PHONY: test-top
END
unindent > tests/Makefile.am << END
- AUTOMAKE_OPTIONS = $am_opts
check-local: test-sub
test-sub:
echo ' ' \$(DIST_COMMON) ' ' | grep '[ /]$test_driver '
@@ -84,10 +77,7 @@ END
$AUTOMAKE
diff Makefile.in Makefile.sav
diff tests/Makefile.in tests/Makefile.sav
- :
-}
-
-do_check ac .
-do_check am build-aux
+ cd "$ocwd" || fatal_ "cannot chdir back to '$ocwd'"
+done
:
diff --git a/t/test-metadata-global-log.sh b/t/test-metadata-global-log.sh
index af435ae..dc65b25 100755
--- a/t/test-metadata-global-log.sh
+++ b/t/test-metadata-global-log.sh
@@ -14,7 +14,7 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
-# Custom test drivers and parallel-tests harness: check the documented
+# Custom test drivers and parallel test harness: check the documented
# semantics for deciding when the content of a test log file should be
# copied in the global test-suite.log file. Currently, this is done
# with the use of the reStructuredText field ':copy-in-global-log:' in
diff --git a/t/tests-environment-backcompat.sh
b/t/tests-environment-backcompat.sh
index 93643d1..db370ab 100755
--- a/t/tests-environment-backcompat.sh
+++ b/t/tests-environment-backcompat.sh
@@ -16,7 +16,7 @@
# With old serial testsuite driver, TESTS_ENVIRONMENT can be used to
# define the "test runner", i.e. the program that the test scripts must
-# be run by (with the parallel-tests driver one should use LOG_COMPILER
+# be run by (with the parallel test harness one should use LOG_COMPILER
# for this). The behaviour tested here is also documented in the manual.
am_serial_tests=yes
diff --git a/t/yacc-line.sh b/t/yacc-line.sh
index 090b72b..d122157 100755
--- a/t/yacc-line.sh
+++ b/t/yacc-line.sh
@@ -94,18 +94,30 @@ for vpath in : false; do
# For debugging,
ls -l . sub sub/dir
- $FGREP '.y' $c_outputs
+ $EGREP 'line|\.y' $c_outputs
# Adjusted "#line" should not contain reference to the builddir.
- $EGREP '#.*line.*(build|\.\.).*\.y' $c_outputs && Exit 1
+ grep '#.*line.*build.*\.y' $c_outputs && Exit 1
+ # Adjusted "#line" should not contain reference to the absolute
+ # srcdir.
+ $EGREP '#.*line *"?/.*\.y' $c_outputs && Exit 1
# Adjusted "#line" should not contain reference to the default
# output file names, e.g., 'y.tab.c' and 'y.tab.h'.
- $EGREP '#.*line.*y\.tab\.' $c_outputs && Exit 1
- # Don't be excessively strict in grepping, to avoid spurious failures.
- grep '#.*line.*zardoz\.y' zardoz.c
- grep '#.*line.*quux\.y' bar-quux.c
- grep '#.*line.*zardoz\.y' sub/foo-zardoz.c
- grep '#.*line.*quux\.y' sub/dir/quux.c
+ grep '#.*line.*y\.tab\.' $c_outputs && Exit 1
+ # Look out for a silly regression.
+ grep "#.*\.y.*\.y" $c_outputs && Exit 1
+ if $vpath; then
+ grep '#.*line.*"\.\./zardoz\.y"' zardoz.c
+ grep '#.*line.*"\.\./dir/quux\.y"' bar-quux.c
+ grep '#.*line.*"\.\./\.\./sub/zardoz\.y"' sub/foo-zardoz.c
+ grep '#.*line.*"\.\./\.\./sub/dir/quux\.y"' sub/dir/quux.c
+ else
+ grep '#.*line.*"zardoz\.y"' zardoz.c
+ grep '#.*line.*"dir/quux\.y"' bar-quux.c
+ grep '#.*line.*"zardoz\.y"' sub/foo-zardoz.c
+ grep '#.*line.*"dir/quux\.y"' sub/dir/quux.c
+ fi
+
cd $srcdir
done
hooks/post-receive
--
GNU Automake
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Automake-commit] [SCM] GNU Automake branch, master, updated. v1.12-117-gcb70240,
Stefano Lattarini <=