[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Automake-commit] [SCM] GNU Automake branch, master, updated. v1.12.1-16
|
From: |
Stefano Lattarini |
|
Subject: |
[Automake-commit] [SCM] GNU Automake branch, master, updated. v1.12.1-164-ge2f007f |
|
Date: |
Sat, 30 Jun 2012 11:43:17 +0000 |
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "GNU Automake".
http://git.sv.gnu.org/gitweb/?p=automake.git;a=commitdiff;h=e2f007f0c78e011c5fab60bfad332f6aad0989f1
The branch, master has been updated
via e2f007f0c78e011c5fab60bfad332f6aad0989f1 (commit)
via 9238349c18f1a6f73c32d1e8b62fb5cfaa83bd06 (commit)
via 68337f9a48e68eaf65460e82f0e6fe5e3450547e (commit)
via bf258729df870cf308f9f92e833d75f192d48a2d (commit)
from 8c784651a7da7dc85bd989e75ce63e35762ce27f (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
commit e2f007f0c78e011c5fab60bfad332f6aad0989f1
Merge: 8c78465 9238349
Author: Stefano Lattarini <address@hidden>
Date: Sat Jun 30 13:42:10 2012 +0200
Merge branch 'maint'
* maint:
tests: fix a spurious failure
configure: fix detection of POSIX shell to work in a VPATH build
tests: prefer "test ! -e FILE" to check that a file doesn't exist
Signed-off-by: Stefano Lattarini <address@hidden>
-----------------------------------------------------------------------
Summary of changes:
configure.ac | 2 +-
t/acloca10.sh | 12 +++---
t/acloca18.sh | 2 +-
t/aclocal-install-fail.sh | 6 +-
t/aclocal-install-mkdir.sh | 12 +++---
t/aclocal-no-install-no-mkdir.sh | 3 +-
t/aclocal-path-install.sh | 2 +-
t/alpha.sh | 2 +-
t/autodist-subdir.sh | 2 +-
t/autodist.sh | 2 +-
t/autohdrdry.sh | 2 +-
t/ax/test-init.sh | 4 +-
t/c-demo.sh | 6 +-
t/check12.sh | 16 ++++----
t/check3.sh | 4 +-
t/colon6.sh | 4 +-
t/compile.sh | 6 +-
t/cond33.sh | 10 ++--
t/cond40.sh | 12 +++---
t/condhook.sh | 2 +-
t/conflnk3.sh | 6 +-
t/cscope.tap | 8 ++--
t/cxx-demo.sh | 2 +-
t/cxx-lt-demo.sh | 2 +-
t/dejagnu-siteexp-extend.sh | 4 +-
t/distcom-subdir.sh | 2 +-
t/disthook.sh | 6 +--
t/distlinksbrk.sh | 10 ++--
t/fort4.sh | 12 +++---
t/fort5.sh | 6 +-
t/help3.sh | 8 ++--
t/install-info-dir.sh | 12 +++---
t/instdir-cond.sh | 4 +-
t/instdir-cond2.sh | 2 +-
t/instdir-java.sh | 6 +-
t/instdir-lisp.sh | 6 +-
t/instdir-ltlib.sh | 6 +-
t/instdir-no-empty.sh | 4 +-
t/instdir-prog.sh | 6 +-
t/instdir-python.sh | 6 +-
t/instdir-texi.sh | 9 ++--
t/instdir.sh | 6 +-
t/instdir2.sh | 6 +-
t/java-extra.sh | 6 +-
t/java-mix.sh | 8 ++--
t/java-uninstall.sh | 10 ++--
t/java3.sh | 2 +-
t/lex-clean-cxx.sh | 16 ++++----
t/lex-clean.sh | 10 ++--
t/lex3.sh | 2 +-
t/libtoo10.sh | 10 +++--
t/license.sh | 2 +-
t/lisp6.sh | 30 +++++++-------
t/lisp7.sh | 6 +-
t/lispdry.sh | 8 ++--
t/ltcond.sh | 20 +++++-----
t/ltconv.sh | 12 +++---
t/maintclean-vpath.sh | 22 +++++-----
t/maintclean.sh | 22 +++++-----
t/maken3.sh | 6 +-
t/man2.sh | 12 +++---
t/man5.sh | 18 ++++----
t/man7.sh | 8 ++--
t/missing-auxfile-stops-makefiles-creation.sh | 12 +++---
t/mkinst2.sh | 4 +-
t/nobase-nodist.sh | 20 +++++-----
t/output13.sh | 6 +-
t/override-conditional-1.sh | 2 +-
t/parallel-tests-driver-install.sh | 4 +-
t/parallel-tests-dry-run-2.sh | 21 +++++-----
t/parallel-tests-exeext.sh | 4 +-
t/parallel-tests-extra-programs.sh | 4 +-
t/parallel-tests-fork-bomb.sh | 2 +-
t/parallel-tests-log-override-1.sh | 6 +-
t/parallel-tests-log-override-2.sh | 8 ++--
t/parallel-tests-recheck-depends-on-all.sh | 2 +-
t/parallel-tests.sh | 10 ++--
t/parallel-tests2.sh | 30 +++++++-------
t/parallel-tests8.sh | 2 +-
t/parallel-tests9.sh | 6 +-
t/pr300-ltlib.sh | 2 +-
t/pr401.sh | 6 +-
t/pr401b.sh | 6 +-
t/pr401c.sh | 6 +-
t/python-dist.sh | 2 +-
t/python-pr10995.sh | 4 +-
t/python-virtualenv.sh | 2 +-
t/python10.sh | 24 ++++++------
t/remake-gnulib-add-header.sh | 2 +-
t/remake-gnulib-remove-header.sh | 2 +-
t/remake-moved-m4-file.sh | 12 +++---
t/remake-renamed-am.sh | 2 +-
t/remake-renamed-m4-file.sh | 12 +++---
t/remake-renamed-m4-macro-and-file.sh | 6 +-
t/remake1a.sh | 2 +-
t/remake8a.sh | 4 +-
t/remake8b.sh | 4 +-
t/repeated-options.sh | 2 +-
t/self-check-cleanup.tap | 8 +---
t/self-check-dir.tap | 7 +--
t/serial-tests.sh | 4 +-
t/stamph2.sh | 8 ++--
t/subdir-distclean.sh | 24 ++++++------
t/subdir-with-slash.sh | 2 +-
t/subobj-clean-lt-pr10697.sh | 14 +++---
t/subobj-clean-pr10697.sh | 12 +++---
t/subpkg-yacc.sh | 2 +-
t/subpkg.sh | 2 +-
t/suffix3.tap | 2 +-
t/symlink2.sh | 2 +-
t/tagsub.sh | 6 ++-
t/tap-basic.sh | 6 +-
t/tap-log.sh | 36 +++++++++---------
t/tap-recheck.sh | 52 ++++++++++++------------
t/test-driver-custom-multitest-recheck.sh | 52 ++++++++++++------------
t/test-driver-custom-multitest-recheck2.sh | 42 ++++++++++----------
t/test-driver-custom.sh | 4 +-
t/test-driver-fail.sh | 4 +-
t/test-log.sh | 36 +++++++++---------
t/test-missing.sh | 8 ++--
t/test-missing2.sh | 10 ++--
t/test-trs-basic.sh | 34 ++++++++--------
t/test-trs-recover.sh | 20 +++++-----
t/test-trs-recover2.sh | 3 +-
t/txinfo13.sh | 4 +-
t/txinfo16.sh | 8 ++--
t/txinfo19.sh | 12 +++---
t/txinfo20.sh | 4 +-
t/txinfo21.sh | 44 ++++++++++----------
t/txinfo22.sh | 4 +-
t/txinfo23.sh | 2 +-
t/txinfo24.sh | 4 +-
t/txinfo25.sh | 6 +-
t/txinfo26.sh | 11 ++---
t/txinfo28.sh | 2 +-
t/txinfo33.sh | 28 +++++++-------
t/uninstall-pr9578.sh | 8 ++--
t/vala-headers.sh | 2 +-
t/vala-parallel.sh | 8 ++--
t/vala-vpath.sh | 8 ++--
t/vala3.sh | 4 +-
t/vala5.sh | 4 +-
t/yacc-auxdir.sh | 4 +-
t/yacc-basic.sh | 4 +-
t/yacc-clean-cxx.sh | 35 ++++++++---------
t/yacc-clean.sh | 28 +++++++-------
t/yacc-cxx.sh | 8 ++--
t/yacc-d-basic.sh | 12 +++---
t/yacc-d-cxx.sh | 16 ++++----
t/yacc-deleted-headers.sh | 28 +++++++-------
t/yacc-dist-nobuild-subdir.sh | 4 +-
t/yacc-mix-c-cxx.sh | 8 ++--
t/yacc4.sh | 4 +-
t/yacc7.sh | 4 +-
t/yaccdry.sh | 2 +-
t/yflags-cmdline-override.sh | 4 +-
156 files changed, 720 insertions(+), 727 deletions(-)
diff --git a/configure.ac b/configure.ac
index a23b2ac..6ad6fdf 100644
--- a/configure.ac
+++ b/configure.ac
@@ -331,7 +331,7 @@ AC_DEFUN([_AM_CHECK_CANDIDATE_SHELL],
_AM_CHECK_SHELL_FEATURE([$1],
[supports "test -e"],
- [test -e configure && test -e . && test ! -e nonesuch],
+ [test -e config.log && test -e . && test ! -e nonesuch],
[], [am_score=1; break])
break
diff --git a/t/acloca10.sh b/t/acloca10.sh
index 291c80c..ec9a506 100755
--- a/t/acloca10.sh
+++ b/t/acloca10.sh
@@ -57,8 +57,8 @@ $FGREP ':macro11:' configure
$FGREP ':macro21:' configure
$FGREP ':macro33:' configure
grep MACRO3 aclocal.m4
-test ! -f m4_1/macro.m4
-test ! -f m4_2/macro.m4
+test ! -e m4_1/macro.m4
+test ! -e m4_2/macro.m4
$sleep
@@ -68,8 +68,8 @@ $FGREP ':macro12:' configure
$FGREP ':macro21:' configure
$FGREP ':macro33:' configure
grep MACRO3 aclocal.m4
-test ! -f m4_1/macro.m4
-test ! -f m4_2/macro.m4
+test ! -e m4_1/macro.m4
+test ! -e m4_2/macro.m4
$sleep
@@ -80,7 +80,7 @@ $FGREP ':macro21:' configure
$FGREP ':macro33:' configure
grep MACRO3 aclocal.m4 && exit 1
test -f m4_1/macro.m4
-test ! -f m4_2/macro.m4
+test ! -e m4_2/macro.m4
cp aclocal.m4 copy.m4
$sleep
@@ -94,7 +94,7 @@ $FGREP ':macro33:' configure
grep MACRO3 aclocal.m4 && exit 1
grep GREPME m4_1/macro.m4 && exit 1
test -f m4_1/macro.m4
-test ! -f m4_2/macro.m4
+test ! -e m4_2/macro.m4
diff aclocal.m4 copy.m4
:
diff --git a/t/acloca18.sh b/t/acloca18.sh
index ec430df..8bdbd56 100755
--- a/t/acloca18.sh
+++ b/t/acloca18.sh
@@ -123,7 +123,7 @@ $ACLOCAL -I 4 -I 1 --diff=diff >stdout 2>stderr || {
cat stderr >&2
cat stdout
grep '#serial 456' stdout
-test ! -f 4/m1.m4
+test ! -e 4/m1.m4
grep 'installing.*4/m1\.m4' stderr
$ACLOCAL -I 5 2>stderr && { cat stderr >&2; exit 1; }
diff --git a/t/aclocal-install-fail.sh b/t/aclocal-install-fail.sh
index d459a55..99fa77a 100755
--- a/t/aclocal-install-fail.sh
+++ b/t/aclocal-install-fail.sh
@@ -41,19 +41,19 @@ $ACLOCAL -I a-regular-file --install 2>stderr \
&& { cat stderr >&2; exit 1; }
cat stderr >&2
$EGREP '(mkdir:|directory ).*a-regular-file' stderr
-test ! -f aclocal.m4
+test ! -e aclocal.m4
$ACLOCAL --install -I unwritable-dir/sub 2>stderr \
&& { cat stderr >&2; exit 1; }
cat stderr >&2
$EGREP '(mkdir:|directory ).*unwritable-dir/sub' stderr
-test ! -f aclocal.m4
+test ! -e aclocal.m4
$ACLOCAL -I unwritable-dir --install 2>stderr \
&& { cat stderr >&2; exit 1; }
cat stderr >&2
$EGREP '(cp:|copy ).*unwritable-dir' stderr
-test ! -f aclocal.m4
+test ! -e aclocal.m4
# Sanity check.
mkdir m4
diff --git a/t/aclocal-install-mkdir.sh b/t/aclocal-install-mkdir.sh
index 483b950..43eec37 100755
--- a/t/aclocal-install-mkdir.sh
+++ b/t/aclocal-install-mkdir.sh
@@ -55,16 +55,16 @@ ls zardoz2 | grep . && exit 1
# Directories in ACLOCAL_PATH should never be created if they don't
# exist.
ACLOCAL_PATH="$(pwd)/none:$(pwd)/none2" $ACLOCAL --install && exit 1
-test ! -d none
-test ! -d none2
+test ! -e none
+test ! -e none2
ACLOCAL_PATH="$(pwd)/none:$(pwd)/none2" $ACLOCAL --install -I x
test -f x/my-defs.m4
-test ! -d none
-test ! -d none2
+test ! -e none
+test ! -e none2
# It's better if aclocal doesn't create the first include dir on failure.
$ACLOCAL --install -I none -I none2 && exit 1
-test ! -d none
-test ! -d none2
+test ! -e none
+test ! -e none2
:
diff --git a/t/aclocal-no-install-no-mkdir.sh b/t/aclocal-no-install-no-mkdir.sh
index 3b163b0..5b47768 100755
--- a/t/aclocal-no-install-no-mkdir.sh
+++ b/t/aclocal-no-install-no-mkdir.sh
@@ -31,7 +31,6 @@ AC_DEFUN([MY_MACRO], [:])
END
$ACLOCAL -I foo --system-acdir=sys-acdir && exit 1
-test ! -d foo
-test ! -r foo
+test ! -e foo
:
diff --git a/t/aclocal-path-install.sh b/t/aclocal-path-install.sh
index b03f28e..4ed1a2c 100755
--- a/t/aclocal-path-install.sh
+++ b/t/aclocal-path-install.sh
@@ -42,7 +42,7 @@ END
$ACLOCAL --install 2>stderr && { cat stderr >&2; exit 1; }
cat stderr >&2
grep ' no -I was supplied' stderr
-test ! -f pdir/foo.m4
+test ! -e pdir/foo.m4
# The '--install' option should cause a required macro found in a
# directory specified in ACLOCAL_PATH to be installed locally.
diff --git a/t/alpha.sh b/t/alpha.sh
index fe7ec1a..b1315f0 100755
--- a/t/alpha.sh
+++ b/t/alpha.sh
@@ -63,7 +63,7 @@ $AUTOMAKE
$MAKE check 2>stderr && { cat stderr >&2; exit 1; }
cat stderr >&2
grep 'NEWS not updated' stderr
-test ! -f works
+test ! -e works
echo 'alpha 1.0a released' > NEWS
$MAKE check
diff --git a/t/autodist-subdir.sh b/t/autodist-subdir.sh
index 8d3e2fb..27971ef 100755
--- a/t/autodist-subdir.sh
+++ b/t/autodist-subdir.sh
@@ -97,7 +97,7 @@ $MAKE distdir
autodist_list="$list" $MAKE check
$MAKE maintainer-clean
-test ! -f sub/README # Sanity check.
+test ! -e sub/README # Sanity check.
rm -rf $me-1.0 # Remove $(distdir).
: Now try creating the automatically-distributed files before
diff --git a/t/autodist.sh b/t/autodist.sh
index bde9f77..f49985c 100755
--- a/t/autodist.sh
+++ b/t/autodist.sh
@@ -80,7 +80,7 @@ $MAKE distdir
autodist_list="$list" $MAKE check
$MAKE maintainer-clean
-test ! -f README # Sanity check.
+test ! -e README # Sanity check.
rm -rf $me-1.0 # Remove $(distdir).
: Now try creating the automatically-distributed files before
diff --git a/t/autohdrdry.sh b/t/autohdrdry.sh
index 3399ec8..3bd474e 100755
--- a/t/autohdrdry.sh
+++ b/t/autohdrdry.sh
@@ -37,6 +37,6 @@ $MAKE
rm -f config.h
$MAKE -n
test -f stamp-h1
-test ! -f config.h
+test ! -r config.h
:
diff --git a/t/ax/test-init.sh b/t/ax/test-init.sh
index 78c8170..1144dd4 100644
--- a/t/ax/test-init.sh
+++ b/t/ax/test-init.sh
@@ -409,7 +409,7 @@ useless_vpath_rebuild ()
.a.b: ; cp $< $@
baz: bar ; cp ../baz bar
END
- if $MAKE all && test ! -f foo.b && test ! -f bar; then
+ if $MAKE all && test ! -e foo.b && test ! -e bar; then
am__useless_vpath_rebuild=no
else
am__useless_vpath_rebuild=yes
@@ -971,7 +971,7 @@ else
# by the cleanup trap below if the test passes. If the test doesn't pass,
# this directory will be kept, to facilitate debugging.
testSubDir=t/$me.dir
- test ! -d $testSubDir || rm_rf_ $testSubDir \
+ test ! -e $testSubDir || rm_rf_ $testSubDir \
|| framework_failure_ "removing old test subdirectory"
test -d t || mkdir t
mkdir $testSubDir \
diff --git a/t/c-demo.sh b/t/c-demo.sh
index cc571b3..2f51cf7 100755
--- a/t/c-demo.sh
+++ b/t/c-demo.sh
@@ -154,8 +154,8 @@ $MAKE test-objs
VERBOSE=x $MAKE check
if cross_compiling; then
- test ! -f tests/test-suite.log
- test ! -f tests/test.log
+ test ! -e tests/test-suite.log
+ test ! -e tests/test.log
else
test -f tests/test-suite.log
grep 'Foo, Bar!' tests/test.log
@@ -173,7 +173,7 @@ if ! cross_compiling && ! grep "[ $tab]depmode=none"
Makefile; then
fi
$MAKE clean
-test ! -f lib/foo.h
+test ! -e lib/foo.h
test -f lib/bar.h
:
diff --git a/t/check12.sh b/t/check12.sh
index 69dac88..53cc4e6 100755
--- a/t/check12.sh
+++ b/t/check12.sh
@@ -146,14 +146,14 @@ for vpath in : false; do
cp -f config.status config-status.sav
$MAKE distclean
- test ! -r hammer.log
- test ! -r hammer.sum
- test ! -r spanner.log
- test ! -r spanner.sum
- test ! -r test-suite.log
- test ! -r a.log
- test ! -r b.log
- test ! -r local.log
+ test ! -e hammer.log
+ test ! -e hammer.sum
+ test ! -e spanner.log
+ test ! -e spanner.sum
+ test ! -e test-suite.log
+ test ! -e a.log
+ test ! -e b.log
+ test ! -e local.log
mv -f config-status.sav config.status
./config.status
diff --git a/t/check3.sh b/t/check3.sh
index a00e37a..64a4512 100755
--- a/t/check3.sh
+++ b/t/check3.sh
@@ -70,8 +70,8 @@ $EGREP '^check:.* \$\(BUILT_SOURCES\)( |$)' dir/Makefile.in
$MAKE clean
# Sanity checks
-test ! -f command1.inc
-test ! -f dir/command2.inc
+test ! -e command1.inc
+test ! -e dir/command2.inc
# Now make sure these two files are rebuilt during make install.
$MAKE install
test -f command1.inc
diff --git a/t/colon6.sh b/t/colon6.sh
index 1e93a8f..d89deaa 100755
--- a/t/colon6.sh
+++ b/t/colon6.sh
@@ -74,7 +74,7 @@ for vpath in : false; do
# Makefile should not depend on version.good.
rm -f version.good
$MAKE Makefile
- test ! -r version.good
+ test ! -e version.good
# version.good should be rebuilt from version.gin.
$MAKE version.good
@@ -83,7 +83,7 @@ for vpath in : false; do
# Makefile should not depend on version.gin.
rm -f ../$srcdir/demo/version.gin
$MAKE Makefile
- test ! -r ../$srcdir/demo/version.gin # Sanity check.
+ test ! -e ../$srcdir/demo/version.gin # Sanity check.
# version.good should depend on version.gin.
rm -f version.good
diff --git a/t/compile.sh b/t/compile.sh
index df5eb83..1da1cde 100755
--- a/t/compile.sh
+++ b/t/compile.sh
@@ -33,13 +33,13 @@ rm -f 'a c' ./-o a.o a.c
./compile touch a.o -- -o 'a c.o' a.c
test -f 'a c.o'
-test ! -f ./-o
-test ! -f a.o
+test ! -e ./-o
+test ! -e a.o
test -f a.c
# Make sure 'compile' works for .obj too.
./compile touch a.obj -- -o ac.obj a.c
-test ! -f a.obj
+test ! -e a.obj
test ac.obj
:
diff --git a/t/cond33.sh b/t/cond33.sh
index afe688a..53225cb 100755
--- a/t/cond33.sh
+++ b/t/cond33.sh
@@ -54,12 +54,12 @@ chmod a-w nowhere
./configure --prefix="$cwd"/nowhere --bindir="$cwd"/bin \
--includedir="$cwd"/inc
$MAKE installdirs
-test ! -d bin
+test ! -e bin
test -d inc/foo
-test ! -f inc/foo/foo.h
+test ! -e inc/foo/foo.h
rm -rf inc
$MAKE install
-test ! -d bin
+test ! -e bin
test -f inc/foo/foo.h
$MAKE distdircheck
@@ -68,11 +68,11 @@ rm -rf inc
./configure two=two --prefix="$cwd"/nowhere --bindir="$cwd"/bin \
--includedir="$cwd"/inc
$MAKE install
-test ! -d inc
+test ! -e inc
test -f bin/x.sh
rm -rf inc
$MAKE installdirs
-test ! -d inc
+test ! -e inc
test -d bin
$MAKE distdircheck
diff --git a/t/cond40.sh b/t/cond40.sh
index 5579131..8725a03 100755
--- a/t/cond40.sh
+++ b/t/cond40.sh
@@ -58,26 +58,26 @@ $AUTOMAKE -a
./configure cond=yes cond1=yes cond2=no cond3=yes
test -f file1
-test ! -f file2
+test ! -e file2
test -f file3
rm -f file1 file3
$MAKE file1 file3
$MAKE file2 && exit 1
test -f file1
-test ! -f file2
+test ! -e file2
test -f file3
$MAKE distclean
./configure cond=no cond1=yes cond2=yes
-test ! -f file1
+test ! -e file1
test -f file2
-test ! -f file3
+test ! -e file3
rm -f file2
$MAKE file1 && exit 1
$MAKE file2
$MAKE file3 && exit 1
-test ! -f file1
+test ! -e file1
test -f file2
-test ! -f file3
+test ! -e file3
:
diff --git a/t/condhook.sh b/t/condhook.sh
index dd2153c..c8675e5 100755
--- a/t/condhook.sh
+++ b/t/condhook.sh
@@ -43,6 +43,6 @@ $AUTOMAKE
$MAKE install
test -f inst/etc/mumble
-test ! -f bad
+test ! -e bad
:
diff --git a/t/conflnk3.sh b/t/conflnk3.sh
index 993581d..a0b8842 100755
--- a/t/conflnk3.sh
+++ b/t/conflnk3.sh
@@ -71,12 +71,12 @@ test -r dest5
$MAKE test
$MAKE distclean
-test ! -r sdir/dest2
-test ! -r sdir/dest3
+test ! -e sdir/dest2
+test ! -e sdir/dest3
test -r dest # Should still exist, Automake knows nothing about it.
test -r dest5 # Ditto.
rm -f dest dest5
-test ! -r dest4
+test ! -e dest4
mkdir build
cd build
diff --git a/t/cscope.tap b/t/cscope.tap
index fdf13f1..d57b2a8 100755
--- a/t/cscope.tap
+++ b/t/cscope.tap
@@ -83,10 +83,10 @@ test_cleanup ()
# VPATH build.
$MAKE distcleancheck
fi \
- && test ! -f cscope.files \
- && test ! -f cscope.out \
- && test ! -f cscope.in.out \
- && test ! -f cscope.po.out \
+ && test ! -e cscope.files \
+ && test ! -e cscope.out \
+ && test ! -e cscope.in.out \
+ && test ! -e cscope.po.out \
|| r='not ok'
result_ "$r" "[$pfx] make distcheck"
}
diff --git a/t/cxx-demo.sh b/t/cxx-demo.sh
index d7aeab7..77f7c83 100755
--- a/t/cxx-demo.sh
+++ b/t/cxx-demo.sh
@@ -69,7 +69,7 @@ $AUTOCONF
$AUTOMAKE --add-missing
test -f build-aux/depcomp
# Not needed by C++ compilers.
-test ! -f build-aux/compile
+test ! -e build-aux/compile
cat > work.h++ << 'END'
#define ACTION "work"
diff --git a/t/cxx-lt-demo.sh b/t/cxx-lt-demo.sh
index d0023e8..a060fc8 100755
--- a/t/cxx-lt-demo.sh
+++ b/t/cxx-lt-demo.sh
@@ -97,7 +97,7 @@ ls -l . ax # For debugging.
for f in ltmain.sh depcomp config.guess config.sub; do
test -f ax/$f && test ! -h ax/$f || exit 1
done
-test ! -f ax/compile # Not required by C++ compilers.
+test ! -e ax/compile # Not required by C++ compilers.
cat > src/main.cc << 'END'
#include "libfoo.h++"
diff --git a/t/dejagnu-siteexp-extend.sh b/t/dejagnu-siteexp-extend.sh
index 2361ff7..45d8a22 100755
--- a/t/dejagnu-siteexp-extend.sh
+++ b/t/dejagnu-siteexp-extend.sh
@@ -153,7 +153,7 @@ grep 'zardoz.*quux' tool.log && exit 1
# by default.
$MAKE distdir
ls -l $distdir
-test ! -r $distdir/bar.dir/bar
-test ! -r $distdir/quux.exp
+test ! -e $distdir/bar.dir/bar
+test ! -e $distdir/quux.exp
:
diff --git a/t/distcom-subdir.sh b/t/distcom-subdir.sh
index 7def7bf..a841fd9 100755
--- a/t/distcom-subdir.sh
+++ b/t/distcom-subdir.sh
@@ -37,7 +37,7 @@ mkdir subdir
$ACLOCAL
$AUTOCONF
$AUTOMAKE
-test ! -f depcomp
+test ! -e depcomp
cat > subdir/Makefile.am << 'END'
bin_PROGRAMS = foo
diff --git a/t/disthook.sh b/t/disthook.sh
index 3da6075..6fefacb 100755
--- a/t/disthook.sh
+++ b/t/disthook.sh
@@ -72,12 +72,10 @@ $MAKE distdir
ls -l $distdir $distdir/doc
cd $distdir
test "$(cat write)" = "all is ok"
-test ! -f removed
-test ! -r removed
+test ! -e removed
test -f doc/README
test -f doc/RELEASE-DATE
-test ! -f doc/HACING
-test ! -r doc/HACING
+test ! -e doc/HACING
./execute
./execute | grep 'I run successfully'
cd ..
diff --git a/t/distlinksbrk.sh b/t/distlinksbrk.sh
index 9f53768..eccfd9c 100755
--- a/t/distlinksbrk.sh
+++ b/t/distlinksbrk.sh
@@ -34,11 +34,11 @@ ln -s "$(pwd)/nonesuch" $lnk2
ln -s $lnk1 $lnka
ln -s $lnka $lnkb
-# Sanity checks. Use 'test -r', since Solaris Sh doesn't grok 'test -e'.
-test ! -r $lnk1
-test ! -r $lnk2
-test ! -r $lnka
-test ! -r $lnkb
+# Sanity checks.
+test ! -e $lnk1
+test ! -e $lnk2
+test ! -e $lnka
+test ! -e $lnkb
test -h $lnk1
test -h $lnk2
test -h $lnka
diff --git a/t/fort4.sh b/t/fort4.sh
index e1e6ed4..ee83773 100755
--- a/t/fort4.sh
+++ b/t/fort4.sh
@@ -83,12 +83,12 @@ echo 'AUTOMAKE_OPTIONS = subdir-objects' >> Makefile.am
$AUTOMAKE
./configure
$MAKE
-test ! -f bar.o
-test ! -f bar.obj
-test ! -f baz.o
-test ! -f baz.obj
-test ! -f goodbye-baz.o
-test ! -f goodbye-baz.obj
+test ! -e bar.o
+test ! -e bar.obj
+test ! -e baz.o
+test ! -e baz.obj
+test ! -e goodbye-baz.o
+test ! -e goodbye-baz.obj
$MAKE distcheck
:
diff --git a/t/fort5.sh b/t/fort5.sh
index 62df8ec..c5be2ab 100755
--- a/t/fort5.sh
+++ b/t/fort5.sh
@@ -99,9 +99,9 @@ echo 'AUTOMAKE_OPTIONS = subdir-objects' >> Makefile.am
$AUTOMAKE -a
./configure
$MAKE
-test ! -f bar.lo
-test ! -f baz.lo
-test ! -f libgoodbye_la-baz.lo
+test ! -e bar.lo
+test ! -e baz.lo
+test ! -e libgoodbye_la-baz.lo
$MAKE distcheck
:
diff --git a/t/help3.sh b/t/help3.sh
index 0ee3043..368c456 100755
--- a/t/help3.sh
+++ b/t/help3.sh
@@ -40,9 +40,9 @@ pkgdata_DATA =
END
$ACLOCAL --force --help --output=foo.m4
-test ! -r foo.m4
+test ! -e foo.m4
$ACLOCAL --output=foo.m4 --version --force
-test ! -r foo.m4
+test ! -e foo.m4
# Sanity check.
$ACLOCAL --output=foo.m4 --force
test -f foo.m4
@@ -50,9 +50,9 @@ test -f foo.m4
mv -f foo.m4 aclocal.m4 # autoconf will need aclocal.m4
$AUTOMAKE --add-missing --help --copy
-test ! -r install-sh
+test ! -e install-sh
$AUTOMAKE --copy --version --add-mising
-test ! -r install-sh
+test ! -e install-sh
# Sanity check.
$AUTOMAKE --add-missing --copy
test -f install-sh
diff --git a/t/install-info-dir.sh b/t/install-info-dir.sh
index 3a391bd..39995fc 100755
--- a/t/install-info-dir.sh
+++ b/t/install-info-dir.sh
@@ -91,7 +91,7 @@ if test $have_installinfo = yes; then
$FGREP 'Does nothing at all, but has a nice name' $instdir/info/dir
$MAKE uninstall
- test ! -f $instdir/info/foo.info
+ test ! -e $instdir/info/foo.info
$FGREP 'but has a nice name' $instdir/info/dir && exit 1
dir="$destdir/$cwd/$instdir/info"
@@ -101,7 +101,7 @@ if test $have_installinfo = yes; then
test -f "$dir"/dir
$FGREP 'Does nothing at all, but has a nice name' "$dir"/dir
$MAKE DESTDIR="$cwd/$destdir" uninstall
- test ! -f "$dir"/foo.info
+ test ! -e "$dir"/foo.info
$FGREP 'but has a nice name' "$dir"/dir && exit 1
unset dir
@@ -121,7 +121,7 @@ chmod a+x bin/install-info
$MAKE install-info >output 2>&1 || { cat output; exit 1; }
cat output
test -f $instdir/info/foo.info
-test ! -f $instdir/info/dir
+test ! -e $instdir/info/dir
grep 'error from install-info' output && exit 1
rm -rf $instdir output
@@ -144,7 +144,7 @@ END
test -f $instdir/info/foo.info
test -f $instdir/info/dir
$MAKE uninstall
- test ! -f $instdir/info/foo.info
+ test ! -e $instdir/info/foo.info
test -f $instdir/info/dir
$FGREP 'but has a nice name' $instdir/info/dir && exit 1
: For shells with busted 'set -e'.
@@ -159,7 +159,7 @@ for val in no NO n; do
rm -rf $instdir
env AM_UPDATE_INFO_DIR="$val" $MAKE install-info
test -f $instdir/info/foo.info
- test ! -f $instdir/info/dir
+ test ! -e $instdir/info/dir
done
$MAKE install-info
@@ -180,7 +180,7 @@ if test $have_installinfo = yes; then
test -f $instdir/info/foo.info
test -f $instdir/info/dir
env AM_UPDATE_INFO_DIR="$val" $MAKE uninstall
- test ! -f $instdir/info/foo.info
+ test ! -e $instdir/info/foo.info
$FGREP 'but has a nice name' $instdir/info/dir && exit 1
: For shells with busted 'set -e'.
done
diff --git a/t/instdir-cond.sh b/t/instdir-cond.sh
index cdcbf5d..d0be1a3 100755
--- a/t/instdir-cond.sh
+++ b/t/instdir-cond.sh
@@ -42,7 +42,7 @@ $AUTOCONF
./configure --prefix="$(pwd)/inst"
$MAKE install
-test ! -d inst/share/instdir-cond
-test ! -d inst/libexec/instdir-cond
+test ! -e inst/share/instdir-cond
+test ! -e inst/libexec/instdir-cond
:
diff --git a/t/instdir-cond2.sh b/t/instdir-cond2.sh
index 9ca58f7..8f386cc 100755
--- a/t/instdir-cond2.sh
+++ b/t/instdir-cond2.sh
@@ -46,6 +46,6 @@ $AUTOCONF
./configure --prefix="$(pwd)/inst"
$MAKE installdirs
-test ! -d inst || { find inst; exit 1; }
+test ! -e inst || { find inst; exit 1; }
:
diff --git a/t/instdir-java.sh b/t/instdir-java.sh
index f9c651c..f31cdb7 100755
--- a/t/instdir-java.sh
+++ b/t/instdir-java.sh
@@ -48,10 +48,10 @@ $MAKE
javadir=
export javadir
$MAKE -e install
-test ! -d "$instdir"
+test ! -e "$instdir"
$MAKE -e install DESTDIR="$destdir"
-test ! -d "$instdir"
-test ! -d "$destdir"
+test ! -e "$instdir"
+test ! -e "$destdir"
$MAKE -e uninstall > stdout || { cat stdout; exit 1; }
cat stdout
grep 'rm -f' stdout && exit 1
diff --git a/t/instdir-lisp.sh b/t/instdir-lisp.sh
index 0c2fa1e..59bf8b0 100755
--- a/t/instdir-lisp.sh
+++ b/t/instdir-lisp.sh
@@ -46,10 +46,10 @@ lispdir=
export lispdir
$MAKE -e install
-test ! -d "$instdir"
+test ! -e "$instdir"
$MAKE -e install DESTDIR="$destdir"
-test ! -d "$instdir"
-test ! -d "$destdir"
+test ! -e "$instdir"
+test ! -e "$destdir"
$MAKE -e uninstall > stdout || { cat stdout; exit 1; }
cat stdout
grep 'rm -f' stdout && exit 1
diff --git a/t/instdir-ltlib.sh b/t/instdir-ltlib.sh
index dcd0362..c6578e2 100755
--- a/t/instdir-ltlib.sh
+++ b/t/instdir-ltlib.sh
@@ -72,10 +72,10 @@ $MAKE
bindir= libdir= pyexecdir=
export bindir libdir pyexecdir
$MAKE -e install
-test ! -d "$instdir"
+test ! -e "$instdir"
$MAKE -e install DESTDIR="$destdir"
-test ! -d "$instdir"
-test ! -d "$destdir"
+test ! -e "$instdir"
+test ! -e "$destdir"
$MAKE -e uninstall > stdout || { cat stdout; exit 1; }
cat stdout
# Creative quoting below to please maintainer-check.
diff --git a/t/instdir-no-empty.sh b/t/instdir-no-empty.sh
index 5357264..bef179d 100755
--- a/t/instdir-no-empty.sh
+++ b/t/instdir-no-empty.sh
@@ -106,14 +106,14 @@ doinst ()
./configure --prefix="$cwd/inst"
doinst
-test ! -d inst || { find inst; exit 1; }
+test ! -e inst || { find inst; exit 1; }
$MAKE uninstall
doinst bin_SCRIPTS=foo.sh AM_MAKEFLAGS='bin_SCRIPTS=foo.sh'
test -f inst/bin/foo.sh
./configure
doinst DESTDIR="$cwd/dest"
-test ! -d dest || { find dest; exit 1; }
+test ! -e dest || { find dest; exit 1; }
$MAKE uninstall
doinst DESTDIR="$cwd/dest" bin_SCRIPTS=foo.sh AM_MAKEFLAGS='bin_SCRIPTS=foo.sh'
test -f dest/usr/local/bin/foo.sh
diff --git a/t/instdir-prog.sh b/t/instdir-prog.sh
index 7306c5c..ed0acc1 100755
--- a/t/instdir-prog.sh
+++ b/t/instdir-prog.sh
@@ -71,10 +71,10 @@ $MAKE
bindir= libdir= pyexecdir=
export bindir libdir pyexecdir
$MAKE -e install
-test ! -d "$instdir"
+test ! -e "$instdir"
$MAKE -e install DESTDIR="$destdir"
-test ! -d "$instdir"
-test ! -d "$destdir"
+test ! -e "$instdir"
+test ! -e "$destdir"
$MAKE -e uninstall > stdout || { cat stdout; exit 1; }
cat stdout
# Creative quoting below to please maintainer-check.
diff --git a/t/instdir-python.sh b/t/instdir-python.sh
index 3d39bd8..d57fb4b 100755
--- a/t/instdir-python.sh
+++ b/t/instdir-python.sh
@@ -50,10 +50,10 @@ pythondir=
export pythondir
$MAKE -e install
-test ! -d "$instdir"
+test ! -e "$instdir"
$MAKE -e install DESTDIR="$destdir"
-test ! -d "$instdir"
-test ! -d "$destdir"
+test ! -e "$instdir"
+test ! -e "$destdir"
$MAKE -e uninstall > stdout || { cat stdout; exit 1; }
cat stdout
grep 'rm -f' stdout && exit 1
diff --git a/t/instdir-texi.sh b/t/instdir-texi.sh
index b15ecaa..33bf636 100755
--- a/t/instdir-texi.sh
+++ b/t/instdir-texi.sh
@@ -60,10 +60,11 @@ infodir= htmldir= dvidir= psdir= pdfdir=
export infodir htmldir dvidir psdir pdfdir
$MAKE -e install install-html install-dvi install-ps install-pdf
-test ! -d "$instdir"
-$MAKE -e install install-html install-dvi install-ps install-pdf
DESTDIR="$destdir"
-test ! -d "$instdir"
-test ! -d "$destdir"
+test ! -e "$instdir"
+$MAKE -e install install-html install-dvi install-ps install-pdf \
+ DESTDIR="$destdir"
+test ! -e "$instdir"
+test ! -e "$destdir"
$MAKE -e uninstall > stdout || { cat stdout; exit 1; }
cat stdout
grep 'rm -f' stdout && exit 1
diff --git a/t/instdir.sh b/t/instdir.sh
index f9d8e64..d0c2532 100755
--- a/t/instdir.sh
+++ b/t/instdir.sh
@@ -59,10 +59,10 @@ bindir= datadir= includedir= foodir= bardir= man1dir=
man2dir=
export bindir datadir includedir foodir bardir man1dir man2dir
$MAKE -e install
-test ! -d "$instdir"
+test ! -e "$instdir"
$MAKE -e install DESTDIR="$destdir"
-test ! -d "$instdir"
-test ! -d "$destdir"
+test ! -e "$instdir"
+test ! -e "$destdir"
$MAKE -e uninstall > stdout || { cat stdout; exit 1; }
cat stdout
grep 'rm -f' stdout && exit 1
diff --git a/t/instdir2.sh b/t/instdir2.sh
index 2731481..51e78be 100755
--- a/t/instdir2.sh
+++ b/t/instdir2.sh
@@ -81,10 +81,10 @@ bindir= datadir= includedir= foodir= bardir= man1dir=
man2dir=
export bindir datadir includedir foodir bardir man1dir man2dir
$MAKE -e install
-test ! -d "$instdir"
+test ! -e "$instdir"
$MAKE -e install DESTDIR="$destdir"
-test ! -d "$instdir"
-test ! -d "$destdir"
+test ! -e "$instdir"
+test ! -e "$destdir"
$MAKE -e uninstall > stdout || { cat stdout; exit 1; }
cat stdout
grep 'rm -f' stdout && exit 1
diff --git a/t/java-extra.sh b/t/java-extra.sh
index d0c1c49..7b3a759 100755
--- a/t/java-extra.sh
+++ b/t/java-extra.sh
@@ -57,8 +57,8 @@ $MAKE
ls -l
test -f Class1.class
test -f Class2.class
-test ! -f Class3.class
-test ! -f Class3.java
+test ! -e Class3.class
+test ! -e Class3.java
$MAKE distclean
@@ -66,7 +66,7 @@ $MAKE distclean
$MAKE
ls -l
test -f Class1.class
-test ! -f Class2.class
+test ! -e Class2.class
test -f Class3.class
test -f Class3.java
diff --git a/t/java-mix.sh b/t/java-mix.sh
index 94adbd6..25e8511 100755
--- a/t/java-mix.sh
+++ b/t/java-mix.sh
@@ -58,11 +58,11 @@ test ! -s stderr
$MAKE distdir
ls -l $distdir # For debugging.
-test ! -f $distdir/Class.java
+test ! -e $distdir/Class.java
test -f $distdir/ClassDist.java
-test ! -f $distdir/ClassNobase.java
+test ! -e $distdir/ClassNobase.java
test -f $distdir/ClassNobaseDist.java
-test ! -f $distdir/ClassNodist.java
-test ! -f $distdir/ClassNobaseNodist.java
+test ! -e $distdir/ClassNodist.java
+test ! -e $distdir/ClassNobaseNodist.java
:
diff --git a/t/java-uninstall.sh b/t/java-uninstall.sh
index 92373df..a128406 100755
--- a/t/java-uninstall.sh
+++ b/t/java-uninstall.sh
@@ -61,11 +61,11 @@ javadir=_inst/java
check_uninstallation()
{
- test ! -r $javadir/aClass.class
- test ! -r $javadir/bClass.class
- test ! -r $javadir/Zardoz.class
- test ! -r $javadir/Baz.class
- test ! -r $javadir/Baz2.class
+ test ! -e $javadir/aClass.class
+ test ! -e $javadir/bClass.class
+ test ! -e $javadir/Zardoz.class
+ test ! -e $javadir/Baz.class
+ test ! -e $javadir/Baz2.class
test -f $javadir/Foo.class
test -f $javadir/Bar.class
test -f $javadir/xClass.class
diff --git a/t/java3.sh b/t/java3.sh
index a4652fd..eab7203 100755
--- a/t/java3.sh
+++ b/t/java3.sh
@@ -49,7 +49,7 @@ ls -l .
find . -name '*.class' | grep . && exit 1
# If we have nothing to install, we shouldn't create any installation
# directory. Related to automake bug#11030.
-test ! -d _inst
+test ! -e _inst
$MAKE uninstall
$MAKE distcheck
diff --git a/t/lex-clean-cxx.sh b/t/lex-clean-cxx.sh
index ef6b5cb..a61dd98 100755
--- a/t/lex-clean-cxx.sh
+++ b/t/lex-clean-cxx.sh
@@ -103,10 +103,10 @@ for target in clean distclean; do
ls -l
test -f parsefoo.cxx
test -f bar-parsebar.cc
- test ! -r parsebaz.l++
- test ! -r parsebaz.c++
- test ! -r parsequx.lpp
- test ! -r qux-parsequx.cpp
+ test ! -e parsebaz.l++
+ test ! -e parsebaz.c++
+ test ! -e parsequx.lpp
+ test ! -e qux-parsequx.cpp
done
cp config.sav config.status
@@ -116,11 +116,11 @@ $MAKE maintainer-clean
ls -l
test -f parsefoo.lxx
test -f parsebar.ll
-test ! -r parsefoo.cxx
-test ! -r bar-parsebar.cc
+test ! -e parsefoo.cxx
+test ! -e bar-parsebar.cc
test -f parsefoo.lxx
test -f parsebar.ll
-test ! -r parsefoo.cxx
-test ! -r bar-parsebar.cc
+test ! -e parsefoo.cxx
+test ! -e bar-parsebar.cc
:
diff --git a/t/lex-clean.sh b/t/lex-clean.sh
index 29ab4c2..91742bf 100755
--- a/t/lex-clean.sh
+++ b/t/lex-clean.sh
@@ -97,9 +97,9 @@ for target in clean distclean; do
test -f lexer.l
test -f lexer.c
test -f bar-lexer.c
- test ! -r baz.l
- test ! -r baz.c
- test ! -r qux-baz.c
+ test ! -e baz.l
+ test ! -e baz.c
+ test ! -e qux-baz.c
done
cp config.sav config.status
@@ -108,7 +108,7 @@ cp config.sav config.status
$MAKE maintainer-clean
ls -l
test -f lexer.l
-test ! -r lexer.c
-test ! -r bar-lexer.c
+test ! -e lexer.c
+test ! -e bar-lexer.c
:
diff --git a/t/lex3.sh b/t/lex3.sh
index 02ae9fe..b008880 100755
--- a/t/lex3.sh
+++ b/t/lex3.sh
@@ -86,6 +86,6 @@ $MAKE distclean
test -f foo.c
./configure # Re-create 'Makefile'.
$MAKE maintainer-clean
-test ! -f foo.c
+test ! -e foo.c
:
diff --git a/t/libtoo10.sh b/t/libtoo10.sh
index d78886a..c84ddb8 100755
--- a/t/libtoo10.sh
+++ b/t/libtoo10.sh
@@ -53,8 +53,10 @@ $AUTOCONF
./configure
$MAKE all check
$MAKE clean
-test ! -d src/.libs
-test ! -d src/_libs
-test ! -d check/.libs
-test ! -d check/_libs
+test ! -e src/.libs
+test ! -e src/_libs
+test ! -e check/.libs
+test ! -e check/_libs
$MAKE distcheck
+
+:
diff --git a/t/license.sh b/t/license.sh
index 3846709..cad4307 100755
--- a/t/license.sh
+++ b/t/license.sh
@@ -35,7 +35,7 @@ EOF
:> ChangeLog
:> README
-test ! -f COPYING
+test ! -e COPYING
$ACLOCAL
$AUTOCONF
diff --git a/t/lisp6.sh b/t/lisp6.sh
index 07b1d58..e877d5a 100755
--- a/t/lisp6.sh
+++ b/t/lisp6.sh
@@ -55,25 +55,25 @@ cwd=$(pwd) || fatal_ "getting current working directory"
$MAKE
test -f am-one.elc
-test ! -f am-two.elc
+test ! -e am-two.elc
test -f am-three.elc
test -f elc-stamp
$MAKE install
test -f lisp/am-one.el
test -f lisp/am-one.elc
-test ! -f lisp/am-two.el
-test ! -f lisp/am-two.elc
-test ! -f lisp/am-three.el
-test ! -f lisp/am-three.elc
+test ! -e lisp/am-two.el
+test ! -e lisp/am-two.elc
+test ! -e lisp/am-three.el
+test ! -e lisp/am-three.elc
$MAKE dist-test
$MAKE distclean
-test ! -f am-one.elc
-test ! -f am-two.elc
-test ! -f am-three.elc
-test ! -f elc-stamp
+test ! -e am-one.elc
+test ! -e am-two.elc
+test ! -e am-three.elc
+test ! -e elc-stamp
./configure --with-lispdir="$cwd/lisp" want_two=1
@@ -96,15 +96,15 @@ test -f lisp/am-one.el
test -f lisp/am-one.elc
test -f lisp/am-two.el
test -f lisp/am-two.elc
-test ! -f lisp/am-three.el
-test ! -f lisp/am-three.elc
+test ! -e lisp/am-three.el
+test ! -e lisp/am-three.elc
$MAKE dist-test
$MAKE distclean
-test ! -f am-one.elc
-test ! -f am-two.elc
-test ! -f am-three.elc
-test ! -f elc-stamp
+test ! -e am-one.elc
+test ! -e am-two.elc
+test ! -e am-three.elc
+test ! -e elc-stamp
:
diff --git a/t/lisp7.sh b/t/lisp7.sh
index e2574ab..4553298 100755
--- a/t/lisp7.sh
+++ b/t/lisp7.sh
@@ -41,9 +41,9 @@ $MAKE >stdout || { cat stdout; exit 1; }
cat stdout
test 1 -eq $(grep -c 'Warnings can be ignored' stdout)
-test ! -f am-one.elc
-test ! -f am-two.elc
-test ! -f am-three.elc
+test ! -e am-one.elc
+test ! -e am-two.elc
+test ! -e am-three.elc
test -f elc-stamp
$MAKE distcheck
diff --git a/t/lispdry.sh b/t/lispdry.sh
index 2dfbc0b..f7de071 100755
--- a/t/lispdry.sh
+++ b/t/lispdry.sh
@@ -50,9 +50,9 @@ chmod a-w .
$MAKE -n
-test ! -f am-one.elc
-test ! -f am-two.elc
-test ! -f am-three.elc
-test ! -f elc-stamp
+test ! -e am-one.elc
+test ! -e am-two.elc
+test ! -e am-three.elc
+test ! -e elc-stamp
:
diff --git a/t/ltcond.sh b/t/ltcond.sh
index 773efbf..ae5415c 100755
--- a/t/ltcond.sh
+++ b/t/ltcond.sh
@@ -72,20 +72,20 @@ $MAKE
test -f lib1foo.la
test -f lib1bar.la
test -f lib2foo.la
-test ! -f lib2bar.la
-test ! -f lib3foo.la
-test ! -f lib3bar.la
+test ! -e lib2bar.la
+test ! -e lib3foo.la
+test ! -e lib3bar.la
$MAKE check
-test ! -f lib2bar.la
+test ! -e lib2bar.la
test -f lib3foo.la
-test ! -f lib3bar.la
+test ! -e lib3bar.la
$MAKE install
test -f lib/lib1foo.la
test -f lib/lib1bar.la
test -f lib/lib2foo.la
-test ! -f lib/lib3foo.la
+test ! -e lib/lib3foo.la
find empty -type f -print > empty.lst
test -s empty.lst && { cat empty.lst; exit 1; }
@@ -98,9 +98,9 @@ test -f lib2foo.la
test -f lib3foo.la
$MAKE clean
-test ! -f lib1foo.la
-test ! -f lib1bar.la
-test ! -f lib2foo.la
-test ! -f lib3foo.la
+test ! -e lib1foo.la
+test ! -e lib1bar.la
+test ! -e lib2foo.la
+test ! -e lib3foo.la
:
diff --git a/t/ltconv.sh b/t/ltconv.sh
index c22a44f..cf06271 100755
--- a/t/ltconv.sh
+++ b/t/ltconv.sh
@@ -137,12 +137,12 @@ find empty -type f -print > empty.lst
test -s empty.lst && { cat empty.lst; exit 1; }
$MAKE clean
-test ! -f libtop.la
-test ! -f sub1/libsub1.la
-test ! -f sub2/libsub2.la
-test ! -f sub2/sub21/libsub21.la
-test ! -f sub2/sub22/libsub22.la
-test ! -f ltconvtest
+test ! -e libtop.la
+test ! -e sub1/libsub1.la
+test ! -e sub2/libsub2.la
+test ! -e sub2/sub21/libsub21.la
+test ! -e sub2/sub22/libsub22.la
+test ! -e ltconvtest
$MAKE installcheck
test -f installcheck-ok
diff --git a/t/maintclean-vpath.sh b/t/maintclean-vpath.sh
index edac287..77f6267 100755
--- a/t/maintclean-vpath.sh
+++ b/t/maintclean-vpath.sh
@@ -70,10 +70,10 @@ test -f sub/zap
$test_cache
$MAKE distclean
-test ! -f bar
-test ! -f Makefile
-test ! -f sub/Makefile
-test ! -f config.status
+test ! -e bar
+test ! -e Makefile
+test ! -e sub/Makefile
+test ! -e config.status
test -f foo.c
test -f sub/zap
test -f ../sub/zap.sh
@@ -93,12 +93,12 @@ chmod u+w ..
$MAKE maintainer-clean
test -f ../sub/zap.sh
-test ! -f bar
-test ! -f foo.c
-test ! -f sub/zap
-test ! -f Makefile
-test ! -f sub/Makefile
-test ! -f config.status
-test ! -d ../autom4te.cache
+test ! -e bar
+test ! -e foo.c
+test ! -e sub/zap
+test ! -e Makefile
+test ! -e sub/Makefile
+test ! -e config.status
+test ! -e ../autom4te.cache
:
diff --git a/t/maintclean.sh b/t/maintclean.sh
index 8c2d3a6..a2c0e6b 100755
--- a/t/maintclean.sh
+++ b/t/maintclean.sh
@@ -64,10 +64,10 @@ test -f sub/zap
$test_cache
$MAKE distclean
-test ! -f bar
-test ! -f Makefile
-test ! -f sub/Makefile
-test ! -f config.status
+test ! -e bar
+test ! -e Makefile
+test ! -e sub/Makefile
+test ! -e config.status
test -f foo.c
test -f sub/zap
test -f sub/zap.sh
@@ -85,12 +85,12 @@ cd ..
$MAKE maintainer-clean
test -f sub/zap.sh
-test ! -f bar
-test ! -f foo.c
-test ! -f sub/zap
-test ! -f Makefile
-test ! -f sub/Makefile
-test ! -f config.status
-test ! -d autom4te.cache
+test ! -e bar
+test ! -e foo.c
+test ! -e sub/zap
+test ! -e Makefile
+test ! -e sub/Makefile
+test ! -e config.status
+test ! -e autom4te.cache
:
diff --git a/t/maken3.sh b/t/maken3.sh
index 99e2305..6d580ec 100755
--- a/t/maken3.sh
+++ b/t/maken3.sh
@@ -152,7 +152,7 @@ check_targets ()
if $have_dotmake; then
grep "stamp-$target$" stdout || exit 1
fi
- test ! -f "stamp-$target$" || exit 1
+ test ! -e "stamp-$target" || exit 1
;;
esac
case $target in
@@ -161,7 +161,7 @@ check_targets ()
if $have_dotmake; then
grep "stamp-$target-sub" stdout || exit 1
fi
- test ! -f "sub/stamp-$target-sub" || exit 1
+ test ! -e "sub/stamp-$target-sub" || exit 1
;;
esac
case $target in
@@ -170,7 +170,7 @@ check_targets ()
if $have_dotmake; then
grep "should-not-be-executed" stdout || exit 1
fi
- test ! -f "sub2/sub2-$target-should-not-be-executed" || exit 1
+ test ! -e "sub2/sub2-$target-should-not-be-executed" || exit 1
;;
esac
done
diff --git a/t/man2.sh b/t/man2.sh
index 2ef0125..a7b7646 100755
--- a/t/man2.sh
+++ b/t/man2.sh
@@ -42,14 +42,14 @@ cwd=$(pwd) || fatal_ "getting current working directory"
./configure --prefix='' --mandir=/man
$MAKE DESTDIR="$cwd/_inst" install
-test -f ./_inst/man/man2/foo.2
-test -f ./_inst/man/man4/foo.4
-test -f ./_inst/man/man4/bar.4
+test -f _inst/man/man2/foo.2
+test -f _inst/man/man4/foo.4
+test -f _inst/man/man4/bar.4
$MAKE DESTDIR="$cwd/_inst" uninstall
-test ! -f ./_inst/man/man2/foo.2
-test ! -f ./_inst/man/man4/foo.4
-test ! -f ./_inst/man/man4/bar.4
+test ! -e _inst/man/man2/foo.2
+test ! -e _inst/man/man4/foo.4
+test ! -e _inst/man/man4/bar.4
:
diff --git a/t/man5.sh b/t/man5.sh
index 28f80b1..d3c2270 100755
--- a/t/man5.sh
+++ b/t/man5.sh
@@ -53,17 +53,17 @@ test -f _inst/man/man2/nbaz-1.4.2
test -f _inst/man/man3/bar.3
test -f _inst/man/man3/nbar.3
-test ! -d _inst/man/man1
-test ! -d _inst/man/man4
-test ! -d _inst/man/man5
+test ! -e _inst/man/man1
+test ! -e _inst/man/man4
+test ! -e _inst/man/man5
$MAKE DESTDIR="$cwd/_inst" uninstall
-test ! -f _inst/man/man2/foo.2
-test ! -f _inst/man/man2/nfoo.2
-test ! -f _inst/man/man2/baz-1.4.2
-test ! -f _inst/man/man2/nbaz-1.4.2
-test ! -f _inst/man/man3/bar.3
-test ! -f _inst/man/man3/nbar.3
+test ! -e _inst/man/man2/foo.2
+test ! -e _inst/man/man2/nfoo.2
+test ! -e _inst/man/man2/baz-1.4.2
+test ! -e _inst/man/man2/nbaz-1.4.2
+test ! -e _inst/man/man3/bar.3
+test ! -e _inst/man/man3/nbar.3
:
diff --git a/t/man7.sh b/t/man7.sh
index cf670e2..5791b72 100755
--- a/t/man7.sh
+++ b/t/man7.sh
@@ -42,8 +42,8 @@ test -f bar.1
test -f ../foo.1
$MAKE maintainer-clean
-test ! -f bar.1
-test ! -f ../foo.1
+test ! -e bar.1
+test ! -e ../foo.1
cd ..
./configure
@@ -53,7 +53,7 @@ test -f bar.1
test -f foo.1
$MAKE maintainer-clean
-test ! -f bar.1
-test ! -f foo.1
+test ! -e bar.1
+test ! -e foo.1
:
diff --git a/t/missing-auxfile-stops-makefiles-creation.sh
b/t/missing-auxfile-stops-makefiles-creation.sh
index 9c6c037..d1c0cd4 100755
--- a/t/missing-auxfile-stops-makefiles-creation.sh
+++ b/t/missing-auxfile-stops-makefiles-creation.sh
@@ -44,10 +44,10 @@ ls -l Makefile.in */Makefile.in || : # For debugging.
# too strict semantics here, so don't check for it. But the later
# files shouldn't exist.
test -f sub1/Makefile.in
-test ! -f sub2/Makefile.in
-test ! -f sub3/Makefile.in
-test ! -f sub4/Makefile.in
-test ! -f sub5/Makefile.in
+test ! -e sub2/Makefile.in
+test ! -e sub3/Makefile.in
+test ! -e sub4/Makefile.in
+test ! -e sub5/Makefile.in
rm -f Makefile.in */Makefile.in
@@ -59,7 +59,7 @@ ls -l Makefile.in */Makefile.in || : # For debugging.
test -f sub1/Makefile.in
test -f sub2/Makefile.in
test -f sub3/Makefile.in
-test ! -f sub4/Makefile.in
-test ! -f sub5/Makefile.in
+test ! -e sub4/Makefile.in
+test ! -e sub5/Makefile.in
:
diff --git a/t/mkinst2.sh b/t/mkinst2.sh
index c2f9bf6..daf8760 100755
--- a/t/mkinst2.sh
+++ b/t/mkinst2.sh
@@ -33,8 +33,8 @@ $AUTOMAKE
./configure --prefix "$(pwd)/sub"
$MAKE installdirs
-test ! -d sub/man
+test ! -e sub/man
$MAKE install
-test ! -d sub/man
+test ! -e sub/man
:
diff --git a/t/nobase-nodist.sh b/t/nobase-nodist.sh
index 6024e5c..1ec466f 100755
--- a/t/nobase-nodist.sh
+++ b/t/nobase-nodist.sh
@@ -46,15 +46,15 @@ $AUTOMAKE -a
$MAKE distdir
ls -l $distdir $distdir/* # For debugging.
-test ! -f $distdir/foo1.el
-test ! -f $distdir/sub/foo2.el
-test ! -f $distdir/foo3.el
-test ! -f $distdir/sub/foo4.el
-test ! -f $distdir/bar1.java
-test ! -f $distdir/sub/bar2.java
-test ! -f $distdir/bar3.java
-test ! -f $distdir/sub/bar4.java
-test ! -f $distdir/baz1.py
-test ! -f $distdir/sub/baz2.py
+test ! -e $distdir/foo1.el
+test ! -e $distdir/sub/foo2.el
+test ! -e $distdir/foo3.el
+test ! -e $distdir/sub/foo4.el
+test ! -e $distdir/bar1.java
+test ! -e $distdir/sub/bar2.java
+test ! -e $distdir/bar3.java
+test ! -e $distdir/sub/bar4.java
+test ! -e $distdir/baz1.py
+test ! -e $distdir/sub/baz2.py
:
diff --git a/t/output13.sh b/t/output13.sh
index a012d33..16bc0f9 100755
--- a/t/output13.sh
+++ b/t/output13.sh
@@ -40,9 +40,9 @@ $AUTOMAKE
./configure create=false
$MAKE
-test ! -f file
-test ! -f link
-test ! -f stamp
+test ! -e file
+test ! -e link
+test ! -e stamp
./configure create=:
test -f file
diff --git a/t/override-conditional-1.sh b/t/override-conditional-1.sh
index fbdcda7..42e0350 100755
--- a/t/override-conditional-1.sh
+++ b/t/override-conditional-1.sh
@@ -44,7 +44,7 @@ $AUTOCONF
./configure cond=no
$MAKE ps
-test ! -r foobar
+test ! -e foobar
./configure cond=yes
$MAKE ps
diff --git a/t/parallel-tests-driver-install.sh
b/t/parallel-tests-driver-install.sh
index 78dff6b..e1a2248 100755
--- a/t/parallel-tests-driver-install.sh
+++ b/t/parallel-tests-driver-install.sh
@@ -45,8 +45,8 @@ cat stderr >&2
ls -l . sub my_aux_dir # For debugging.
test -f my_aux_dir/test-driver
-test ! -r test-driver
-test ! -r sub/test-driver
+test ! -e test-driver
+test ! -e sub/test-driver
grep '^parallel-tests:.*installing.*my_aux_dir/test-driver' stderr
diff --git a/t/parallel-tests-dry-run-2.sh b/t/parallel-tests-dry-run-2.sh
index 940cab2..11a0f45 100755
--- a/t/parallel-tests-dry-run-2.sh
+++ b/t/parallel-tests-dry-run-2.sh
@@ -49,17 +49,18 @@ make_n_ ()
files='foo.log bar.log foo.trs bar.trs'
-for target in check recheck test-suite.log; do
- test ! -f foo.log
- test ! -f foo.trs
- test ! -f bar.log
- test ! -f bar.trs
- test ! -f test-suite.log
-done
-
echo 'exit 0' > foo.test
echo 'exit 1' > bar.test
+for target in check recheck test-suite.log; do
+ make_n_ $target
+ test ! -e foo.log
+ test ! -e foo.trs
+ test ! -e bar.log
+ test ! -e bar.trs
+ test ! -e test-suite.log
+done
+
$MAKE check && exit 1
chmod a-w .
@@ -101,9 +102,9 @@ rm -f foo.log bar.trs
chmod a-w .
for target in check recheck test-suite.log $files; do
make_n_ $target
- test ! -f foo.log
+ test ! -e foo.log
test -f foo.trs
- test ! -f bar.trs
+ test ! -e bar.trs
test -f bar.log
done
diff --git a/t/parallel-tests-exeext.sh b/t/parallel-tests-exeext.sh
index e4eb260..22a5aad 100755
--- a/t/parallel-tests-exeext.sh
+++ b/t/parallel-tests-exeext.sh
@@ -56,9 +56,9 @@ touch x y.bin a.test b.test.bin
$MAKE check
ls -l # For debugging.
test -f y.log
-test ! -r y.bin.log
+test ! -e y.bin.log
test -f b.log
-test ! -r b.test.log
+test ! -e b.test.log
$EGREP '^y\.log: y(\$\(EXEEXT\)|\.bin)' Makefile
$EGREP '^\.test(\$\(EXEEXT\)|\.bin)\.log:' Makefile
diff --git a/t/parallel-tests-extra-programs.sh
b/t/parallel-tests-extra-programs.sh
index 52eb2b0..0a7f97c 100755
--- a/t/parallel-tests-extra-programs.sh
+++ b/t/parallel-tests-extra-programs.sh
@@ -134,8 +134,8 @@ grep foofoofoo foo.log
grep barbarbar bar.log
grep yepyepyep baz.log
# Files that shouldn't have been created.
-test ! -f none.log
-test ! -f test-suite.log
+test ! -e none.log
+test ! -e test-suite.log
# Expected testsuite progress output.
grep '^PASS: baz\.test$' stdout
# Don't anchor the end of the next two patterns, to allow for non-empty
diff --git a/t/parallel-tests-fork-bomb.sh b/t/parallel-tests-fork-bomb.sh
index 2e6bfac..493e671 100755
--- a/t/parallel-tests-fork-bomb.sh
+++ b/t/parallel-tests-fork-bomb.sh
@@ -104,7 +104,7 @@ do_check ()
cat output
$FGREP '::OOPS::' output && exit 1 # Possible infinite recursion.
# Check that at least we don't create a botched global log file.
- test ! -f "$log"
+ test ! -e "$log"
if using_gmake; then
grep "[Cc]ircular.*dependency" output | $FGREP "$log"
test $st -gt 0
diff --git a/t/parallel-tests-log-override-1.sh
b/t/parallel-tests-log-override-1.sh
index 1fa5d9a..e4af517 100755
--- a/t/parallel-tests-log-override-1.sh
+++ b/t/parallel-tests-log-override-1.sh
@@ -78,7 +78,7 @@ test -f test-suite.log && exit 99 # Sanity check.
# Check that we can override the testsuite log file at runtime.
TEST_SUITE_LOG=zardoz.log $MAKE -e check
ls -l
-test ! -f test-suite.log
+test ! -e test-suite.log
cat zardoz.log
test_log_expected zardoz.log
# Sanity check the distribution too (this also does minimal checks on
@@ -90,7 +90,7 @@ TEST_SUITE_LOG=zardoz.log $MAKE -e distcheck
cp orig test-suite.log
TEST_SUITE_LOG=zardoz.log $MAKE -e clean
ls -l
-test ! -f zardoz.log
+test ! -e zardoz.log
diff orig test-suite.log
# Check that the default testsuite log doesn't get unduly modified.
@@ -103,7 +103,7 @@ diff orig test-suite.log
test_log_expected TheLogFile
TEST_SUITE_LOG=TheLogFile $MAKE -e clean
ls -l
-test ! -f TheLogFile
+test ! -e TheLogFile
diff orig test-suite.log
:
diff --git a/t/parallel-tests-log-override-2.sh
b/t/parallel-tests-log-override-2.sh
index e690da9..a747b00 100755
--- a/t/parallel-tests-log-override-2.sh
+++ b/t/parallel-tests-log-override-2.sh
@@ -68,10 +68,10 @@ do
cat pass.log
cat skip.log
cat partial.log
- test ! -f test-suite.log
- test ! -f pass2.log
- test ! -f skip2.log
- test ! -f fail.log
+ test ! -e test-suite.log
+ test ! -e pass2.log
+ test ! -e skip2.log
+ test ! -e fail.log
grep '^PASS: pass\.test$' stdout
grep '^SKIP: skip\.test$' stdout
$FGREP 'SKIP: skip' partial.log
diff --git a/t/parallel-tests-recheck-depends-on-all.sh
b/t/parallel-tests-recheck-depends-on-all.sh
index df3cdfc..af53061 100755
--- a/t/parallel-tests-recheck-depends-on-all.sh
+++ b/t/parallel-tests-recheck-depends-on-all.sh
@@ -66,7 +66,7 @@ $AUTOMAKE -a
$MAKE check >stdout && { cat stdout; exit 1; }
cat stdout
count_test_results total=3 pass=1 fail=2 skip=0 xfail=0 xpass=0 error=0
-test ! -f status
+test ! -e status
$sleep
: > status
diff --git a/t/parallel-tests.sh b/t/parallel-tests.sh
index f6ebb85..a1062d3 100755
--- a/t/parallel-tests.sh
+++ b/t/parallel-tests.sh
@@ -77,10 +77,10 @@ test -f bar.log
test -f foo.log
$MAKE clean
-test ! -f baz.log
-test ! -f bar.log
-test ! -f foo.log
-test ! -f test-suite.log
+test ! -e baz.log
+test ! -e bar.log
+test ! -e foo.log
+test ! -e test-suite.log
# Check dependencies: baz.test needs to run before bar.test,
# but foo.test is not needed.
@@ -94,7 +94,7 @@ grep '^ERROR: bar\.test$' stdout
test -f baz.log
test -f bar.log
-test ! -f foo.log
+test ! -e foo.log
test -f test-suite.log
# Upon a lazy rerun, foo.test should be run, but the others shouldn't.
diff --git a/t/parallel-tests2.sh b/t/parallel-tests2.sh
index 5e28cc0..ae9bd38 100755
--- a/t/parallel-tests2.sh
+++ b/t/parallel-tests2.sh
@@ -84,8 +84,8 @@ test -f bla
# "make clean" should remove HTML files.
$MAKE clean
-test ! -f mylog.html
-test ! -f bla
+test ! -e mylog.html
+test ! -e bla
# Always create the HTML output, even if there were no failures.
rm -f mylog.html
@@ -100,8 +100,8 @@ test -f mylog.html
# Create HTML output for an individual test.
$MAKE foo.html
grep 'this is .*foo\.test' foo.html
-test ! -f bar.html
-test ! -f baz.html
+test ! -e bar.html
+test ! -e baz.html
# Create HTML output for individual tests. Since the pre-existing log
# files are expected to be used for the HTML conversion, this should
@@ -112,35 +112,35 @@ grep 'this is .*baz\.test' baz.html
# HTML output removed by mostlyclean.
$MAKE mostlyclean
-test ! -f foo.html
-test ! -f bar.html
-test ! -f baz.html
-test ! -f mylog.html
+test ! -e foo.html
+test ! -e bar.html
+test ! -e baz.html
+test ! -e mylog.html
# check-html and recheck-html should cause check_SCRIPTS to be created,
# and recheck-html should rerun no tests if check has not been run.
$MAKE clean
-test ! -f mylog.html
+test ! -e mylog.html
env TEST_LOGS=foo.log $MAKE -e check-html
test -f bla
test -f foo.log
-test ! -f bar.log
-test ! -f baz.log
+test ! -e bar.log
+test ! -e baz.log
test -f mylog.html
$MAKE clean
env TESTS=foo.test $MAKE -e recheck-html
test -f bla
-test ! -f foo.log
+test ! -e foo.log
test -f mylog.html
$MAKE clean
$MAKE recheck-html
test -f bla
-test ! -f foo.log
-test ! -f bar.log
-test ! -f baz.log
+test ! -e foo.log
+test ! -e bar.log
+test ! -e baz.log
test -f mylog.html
:
diff --git a/t/parallel-tests8.sh b/t/parallel-tests8.sh
index 3e04759..eb48f93 100755
--- a/t/parallel-tests8.sh
+++ b/t/parallel-tests8.sh
@@ -68,7 +68,7 @@ mkdir build
cd build
../configure
$MAKE check
-test ! -f ../foo.log
+test ! -e ../foo.log
$MAKE distcheck
:
diff --git a/t/parallel-tests9.sh b/t/parallel-tests9.sh
index b22e82d..583c674 100755
--- a/t/parallel-tests9.sh
+++ b/t/parallel-tests9.sh
@@ -71,9 +71,9 @@ grep '^FAIL: baz\.test$' stdout
$MAKE clean
$MAKE recheck
test -f bla
-test ! -f foo.log
-test ! -f bar.log
-test ! -f baz.log
+test ! -e foo.log
+test ! -e bar.log
+test ! -e baz.log
test -f mylog.log
:
diff --git a/t/pr300-ltlib.sh b/t/pr300-ltlib.sh
index 423be7d..4926834 100755
--- a/t/pr300-ltlib.sh
+++ b/t/pr300-ltlib.sh
@@ -52,7 +52,7 @@ cwd=$(pwd) || fatal_ "getting current working directory"
./configure --prefix "$cwd/inst" --libdir "$cwd/inst/lib"
# A rule in the Makefile should create subdir.
-test ! -d subdir
+test ! -e subdir
$MAKE >stdout || { cat stdout; exit 1; }
cat stdout
test -d subdir
diff --git a/t/pr401.sh b/t/pr401.sh
index 20a1d4a..b104476 100755
--- a/t/pr401.sh
+++ b/t/pr401.sh
@@ -100,7 +100,7 @@ $ACLOCAL
$AUTOCONF
$AUTOMAKE
./configure
-test ! -d lib/lib
+test ! -e lib/lib
$MAKE distcheck
## -------------------------------------------- ##
@@ -144,8 +144,8 @@ $ACLOCAL
$AUTOCONF
$AUTOMAKE --add-missing
./configure
-test ! -d src/lib
-test ! -d 'src/$(top_builddir)'
+test ! -e src/lib
+test ! -e 'src/$(top_builddir)'
$MAKE
$MAKE check
$MAKE distclean
diff --git a/t/pr401b.sh b/t/pr401b.sh
index 48228a2..5d0adc0 100755
--- a/t/pr401b.sh
+++ b/t/pr401b.sh
@@ -101,7 +101,7 @@ $ACLOCAL
$AUTOCONF
$AUTOMAKE -a
./configure
-test ! -d lib/lib
+test ! -e lib/lib
$MAKE distcheck
## -------------------------------------------- ##
@@ -144,8 +144,8 @@ $ACLOCAL
$AUTOCONF
$AUTOMAKE --add-missing
./configure
-test ! -d src/lib
-test ! -d 'src/$(top_builddir)'
+test ! -e src/lib
+test ! -e 'src/$(top_builddir)'
$MAKE
$MAKE check
$MAKE distclean
diff --git a/t/pr401c.sh b/t/pr401c.sh
index a606f84..3336f13 100755
--- a/t/pr401c.sh
+++ b/t/pr401c.sh
@@ -102,7 +102,7 @@ $ACLOCAL
$AUTOCONF
$AUTOMAKE
./configure
-test ! -d lib/lib
+test ! -e lib/lib
$MAKE distcheck
## -------------------------------------------- ##
@@ -147,8 +147,8 @@ $AUTOCONF
$AUTOMAKE --add-missing
./configure
$MAKE
-test ! -d src/lib
-test ! -d 'src/$(top_builddir)'
+test ! -e src/lib
+test ! -e 'src/$(top_builddir)'
$MAKE check
$MAKE distclean
diff --git a/t/python-dist.sh b/t/python-dist.sh
index de20b40..0b6a4b0 100755
--- a/t/python-dist.sh
+++ b/t/python-dist.sh
@@ -73,6 +73,6 @@ $AUTOMAKE
$MAKE disttest
# It's not distributed, hence it shouldn't be needlessly generated.
-test ! -f my-nodist.py
+test ! -e my-nodist.py
:
diff --git a/t/python-pr10995.sh b/t/python-pr10995.sh
index a822ce1..c530a13 100755
--- a/t/python-pr10995.sh
+++ b/t/python-pr10995.sh
@@ -48,8 +48,8 @@ test -f py-compile
$MAKE install
test -f inst/py/yes.py
test -f inst/py/yes.pyc
-test ! -f inst/py/no.py
-test ! -f inst/py/no.pyc
+test ! -e inst/py/no.py
+test ! -e inst/py/no.pyc
$MAKE disttest
diff --git a/t/python-virtualenv.sh b/t/python-virtualenv.sh
index 90d090e..51ae78e 100755
--- a/t/python-virtualenv.sh
+++ b/t/python-virtualenv.sh
@@ -164,7 +164,7 @@ $MAKE distclean
pythondir=$py_site pyexecdir=$py_site
export pythondir pyexecdir
$MAKE -e install
-test ! -d bad-prefix
+test ! -e bad-prefix
$MAKE -e test-install
$MAKE test-run
$MAKE -e uninstall
diff --git a/t/python10.sh b/t/python10.sh
index 5df42a1..5465810 100755
--- a/t/python10.sh
+++ b/t/python10.sh
@@ -61,26 +61,26 @@ $MAKE install
test -f "$inst/your/two.py"
test -f "$inst/your/two.pyc"
test -f "$inst/your/two.pyo"
-test ! -f "$inst/my/one.py"
-test ! -f "$inst/my/one.pyc"
-test ! -f "$inst/my/one.pyo"
+test ! -e "$inst/my/one.py"
+test ! -e "$inst/my/one.pyc"
+test ! -e "$inst/my/one.pyo"
$MAKE uninstall
-test ! -f "$inst/your/two.py"
-test ! -f "$inst/your/two.pyc"
-test ! -f "$inst/your/two.pyo"
+test ! -e "$inst/your/two.py"
+test ! -e "$inst/your/two.pyc"
+test ! -e "$inst/your/two.pyo"
../configure --prefix=$cwd/"$inst" one=1
$MAKE install
-test ! -f "$inst/your/two.py"
-test ! -f "$inst/your/two.pyc"
-test ! -f "$inst/your/two.pyo"
+test ! -e "$inst/your/two.py"
+test ! -e "$inst/your/two.pyc"
+test ! -e "$inst/your/two.pyo"
test -f "$inst/my/one.py"
test -f "$inst/my/one.pyc"
test -f "$inst/my/one.pyo"
$MAKE uninstall
-test ! -f "$inst/my/one.py"
-test ! -f "$inst/my/one.pyc"
-test ! -f "$inst/my/one.pyo"
+test ! -e "$inst/my/one.py"
+test ! -e "$inst/my/one.pyc"
+test ! -e "$inst/my/one.pyo"
$MAKE disttest
diff --git a/t/remake-gnulib-add-header.sh b/t/remake-gnulib-add-header.sh
index e0c7f06..127fa1f 100755
--- a/t/remake-gnulib-add-header.sh
+++ b/t/remake-gnulib-add-header.sh
@@ -89,7 +89,7 @@ $AUTOCONF
$MAKE
ls -l
-test ! -f stdio.h
+test ! -e stdio.h
# Also try our build rules in a VPATH build.
$MAKE distcheck
diff --git a/t/remake-gnulib-remove-header.sh b/t/remake-gnulib-remove-header.sh
index b235346..9044a04 100755
--- a/t/remake-gnulib-remove-header.sh
+++ b/t/remake-gnulib-remove-header.sh
@@ -114,7 +114,7 @@ for vpath in : false; do
using_gmake || $MAKE Makefile
$MAKE
ls -l
- test ! -f stdio.h
+ test ! -e stdio.h
# And now simulate that we want our custom stdio.h back.
diff --git a/t/remake-moved-m4-file.sh b/t/remake-moved-m4-file.sh
index cd6453b..68ea5a8 100755
--- a/t/remake-moved-m4-file.sh
+++ b/t/remake-moved-m4-file.sh
@@ -55,9 +55,9 @@ $MAKE test
$MAKE distdir
ls -l $distdir $distdir/*
test -f $distdir/d2/foo.m4
-test ! -f $distdir/d1/foo.m4
+test ! -e $distdir/d1/foo.m4
test -f $distdir/d1/macros.m4
-test ! -f $distdir/d2/macros.m4
+test ! -e $distdir/d2/macros.m4
# Move both files at once.
mv d1/macros.m4 d3/macros.m4
@@ -68,9 +68,9 @@ $MAKE distdir
ls -l $distdir $distdir/*
test -f $distdir/d3/foo.m4
test -f $distdir/d3/macros.m4
-test ! -f $distdir/d1/foo.m4
-test ! -f $distdir/d2/foo.m4
-test ! -f $distdir/d1/macros.m4
-test ! -f $distdir/d2/macros.m4
+test ! -e $distdir/d1/foo.m4
+test ! -e $distdir/d2/foo.m4
+test ! -e $distdir/d1/macros.m4
+test ! -e $distdir/d2/macros.m4
:
diff --git a/t/remake-renamed-am.sh b/t/remake-renamed-am.sh
index e93bc74..378aa26 100755
--- a/t/remake-renamed-am.sh
+++ b/t/remake-renamed-am.sh
@@ -52,7 +52,7 @@ echo 'all-local:; echo ok > has-run-2' > zardoz.am
echo 'include $(srcdir)/zardoz.am' > Makefile.am
using_gmake || $MAKE Makefile
$MAKE
-test ! -f has-run-1
+test ! -e has-run-1
test -f has-run-2
:
diff --git a/t/remake-renamed-m4-file.sh b/t/remake-renamed-m4-file.sh
index bb82129..ee25c58 100755
--- a/t/remake-renamed-m4-file.sh
+++ b/t/remake-renamed-m4-file.sh
@@ -55,7 +55,7 @@ $MAKE test
$MAKE distdir
ls -l $distdir $distdir/*
test -f $distdir/m4/bar.m4
-test ! -f $distdir/m4/foo.m4
+test ! -e $distdir/m4/foo.m4
mv m4/macros.m4 m4/defs.m4
using_gmake || $MAKE Makefile
@@ -63,7 +63,7 @@ $MAKE test
$MAKE distdir
ls -l $distdir $distdir/*
test -f $distdir/m4/defs.m4
-test ! -f $distdir/m4/macros.m4
+test ! -e $distdir/m4/macros.m4
# Rename both files at once.
@@ -75,9 +75,9 @@ $MAKE distdir
ls -l $distdir $distdir/*
test -f $distdir/m4/quux.m4
test -f $distdir/acinclude.m4
-test ! -f $distdir/m4/foo.m4
-test ! -f $distdir/m4/bar.m4
-test ! -f $distdir/m4/macros.m4
-test ! -f $distdir/m4/defs.m4
+test ! -e $distdir/m4/foo.m4
+test ! -e $distdir/m4/bar.m4
+test ! -e $distdir/m4/macros.m4
+test ! -e $distdir/m4/defs.m4
:
diff --git a/t/remake-renamed-m4-macro-and-file.sh
b/t/remake-renamed-m4-macro-and-file.sh
index e857d23..89d2164 100755
--- a/t/remake-renamed-m4-macro-and-file.sh
+++ b/t/remake-renamed-m4-macro-and-file.sh
@@ -62,7 +62,7 @@ $MAKE distdir
ls -l $distdir $distdir/*
test -f $distdir/m4/bar.m4
test -f $distdir/m4/macros.m4
-test ! -f $distdir/m4/foo.m4
+test ! -e $distdir/m4/foo.m4
# Rename both at once.
@@ -80,7 +80,7 @@ $MAKE distdir
ls -l $distdir $distdir/*
test -f $distdir/m4/quux.m4
test -f $distdir/m4/defs.m4
-test ! -f $distdir/m4/bar.m4
-test ! -f $distdir/m4/macros.m4
+test ! -e $distdir/m4/bar.m4
+test ! -e $distdir/m4/macros.m4
:
diff --git a/t/remake1a.sh b/t/remake1a.sh
index 0a900f7..6460fc3 100755
--- a/t/remake1a.sh
+++ b/t/remake1a.sh
@@ -47,7 +47,7 @@ $MAKE Makefile
cd ..
# Check that no spurious Makefile has been created in the
# top-level directory.
-test ! -r Makefile
+test ! -e Makefile
# Check that the Makefile in the subdirectory has been properly
# updated.
$FGREP "$fingerprint" sub/Makefile
diff --git a/t/remake8a.sh b/t/remake8a.sh
index 65fd4bd..9a9765c 100755
--- a/t/remake8a.sh
+++ b/t/remake8a.sh
@@ -74,7 +74,7 @@ using_gmake || $MAKE Makefile
$MAKE
cat bar
grep '!Baz!' bar
-test ! -r foo
+test ! -e foo
$MAKE distcheck
rm -f bar
@@ -105,7 +105,7 @@ using_gmake || $MAKE Makefile
$MAKE
cat quux
grep '!Zardoz!' quux
-test ! -r bar
+test ! -e bar
$MAKE distcheck
rm -f quux
diff --git a/t/remake8b.sh b/t/remake8b.sh
index 64f135e..850347a 100755
--- a/t/remake8b.sh
+++ b/t/remake8b.sh
@@ -76,7 +76,7 @@ using_gmake || $MAKE Makefile
$MAKE
cat bar
grep '!Baz!' bar
-test ! -r foo
+test ! -e foo
$MAKE distcheck
rm -f bar
@@ -107,7 +107,7 @@ using_gmake || $MAKE Makefile
$MAKE
cat quux
grep '!Zardoz!' quux
-test ! -r bar
+test ! -e bar
$MAKE distcheck
rm -f quux
diff --git a/t/repeated-options.sh b/t/repeated-options.sh
index 53dc666..c300996 100755
--- a/t/repeated-options.sh
+++ b/t/repeated-options.sh
@@ -77,6 +77,6 @@ $MAKE clean
$MAKE distcheck
ls -l
test -f $me-1.0.tar.bz2
-test ! -r $me-1.0.tar.gz
+test ! -e $me-1.0.tar.gz
:
diff --git a/t/self-check-cleanup.tap b/t/self-check-cleanup.tap
index b2bc7f2..2c5a9a9 100755
--- a/t/self-check-cleanup.tap
+++ b/t/self-check-cleanup.tap
@@ -80,9 +80,7 @@ chmod 500 t/dummy.dir/sub t/dummy.dir
command_ok_ "pre-cleanup can deal with low-perms testdir" \
$AM_TEST_RUNNER_SHELL -c '. ./defs' t/dummy.sh
command_ok_ "pre-cleanup removed low-perms testdir" \
- eval 'test ! -f t/dummy.dir \
- && test ! -d t/dummy.dir \
- && test ! -r t/dummy.dir'
+ test ! -e t/dummy.dir
do_clean_setup
@@ -107,9 +105,7 @@ command_ok_ "post-cleanup can deal with low-perms testdir" \
:
' t/dummy.sh
command_ok_ "post-cleanup removed null-perms testdir" \
- eval 'test ! -f t/dummy.dir \
- && test ! -d t/dummy.dir \
- && test ! -r t/dummy.dir'
+ test ! -e t/dummy.dir
do_clean_setup
diff --git a/t/self-check-dir.tap b/t/self-check-dir.tap
index 96b831a..94555a6 100755
--- a/t/self-check-dir.tap
+++ b/t/self-check-dir.tap
@@ -35,8 +35,7 @@ echo "$cwd"
do_check ()
{
- test ! -d _self.dir || rm -rf _self.dir \
- || framework_failure_ "cleaning up _self.dir"
+ rm -rf _self.dir || framework_failure_ "cleaning up _self.dir"
command_ok_ "$1 [$2]" $AM_TEST_RUNNER_SHELL -c "
$2
. ./defs || exit 99
@@ -66,9 +65,7 @@ do_check 'do not pre-populate testdir' \
do_check 'do not create nor chdir in testdir' \
'am_create_testdir=no' \
- 'test ! -d t/_self.dir || exit 1
- test ! -f t/_self.dir || exit 1
- test ! -r t/_self.dir || exit 1
+ 'test ! -e t/_self.dir || exit 1
grep "self-check-dir\.tap" Makefile || exit 1
case $(pwd) in '"$cwd"') : ;; *) exit 1;; esac'
diff --git a/t/serial-tests.sh b/t/serial-tests.sh
index 95cee71..26ce68f 100755
--- a/t/serial-tests.sh
+++ b/t/serial-tests.sh
@@ -62,7 +62,7 @@ $ACLOCAL
$AUTOMAKE
grep TEST Makefile.in # For debugging.
hasnt_parallel_tests Makefile.in
-test ! -r test-driver
+test ! -e test-driver
cd ..
cd two
@@ -74,7 +74,7 @@ has_parallel_tests aMakefile.in
hasnt_parallel_tests bMakefile.in
mv aMakefile.in aMakefile.sav
mv bMakefile.in bMakefile.sav
-test ! -r test-driver
+test ! -e test-driver
test -f config/test-driver
$AUTOMAKE
diff aMakefile.sav aMakefile.in
diff --git a/t/stamph2.sh b/t/stamph2.sh
index e2ccbda..10c7d98 100755
--- a/t/stamph2.sh
+++ b/t/stamph2.sh
@@ -57,12 +57,12 @@ rm -f stamp-h*
rm -f sdir1/stamp-h*
./config.status sdir1/7.h 2.h sdir1/4.h
-test ! -f stamp-h1
+test ! -e stamp-h1
test -f stamp-h2
-test ! -f stamp-h3
+test ! -e stamp-h3
test -f sdir1/stamp-h4
-test ! -f sdir1/stamp-h5
-test ! -f sdir1/stamp-h6
+test ! -e sdir1/stamp-h5
+test ! -e sdir1/stamp-h6
test -f sdir1/stamp-h7
:
diff --git a/t/subdir-distclean.sh b/t/subdir-distclean.sh
index 74dac71..25274fd 100755
--- a/t/subdir-distclean.sh
+++ b/t/subdir-distclean.sh
@@ -66,12 +66,12 @@ test -f sub1/run
touch sub2/oops sub1/subsub/oops
$MAKE distclean
-test ! -f sub1/run
-test ! -f sub2/oops
-test ! -f sub1/subsub/oops
-test ! -f sub1/Makefile
-test ! -f sub2/Makefile
-test ! -f sub1/subsub/Makefile
+test ! -e sub1/run
+test ! -e sub2/oops
+test ! -e sub1/subsub/oops
+test ! -e sub1/Makefile
+test ! -e sub2/Makefile
+test ! -e sub1/subsub/Makefile
mkdir build
cd build
@@ -88,12 +88,12 @@ test -f sub1/run
touch sub2/oops sub1/subsub/oops
$MAKE maintainer-clean
-test ! -f sub1/run
-test ! -f sub2/oops
-test ! -f sub1/subsub/oops
-test ! -f sub1/Makefile
-test ! -f sub2/Makefile
-test ! -f sub1/subsub/Makefile
+test ! -e sub1/run
+test ! -e sub2/oops
+test ! -e sub1/subsub/oops
+test ! -e sub1/Makefile
+test ! -e sub2/Makefile
+test ! -e sub1/subsub/Makefile
cd ..
diff --git a/t/subdir-with-slash.sh b/t/subdir-with-slash.sh
index 661f8fe..0a3330b 100755
--- a/t/subdir-with-slash.sh
+++ b/t/subdir-with-slash.sh
@@ -50,6 +50,6 @@ test -f $distdir/src/subdir/foo
test -f $distdir/src/subdir2/foo
$MAKE clean
$MAKE distclean
-test ! -f src/subdir2/Makefile
+test ! -e src/subdir2/Makefile
:
diff --git a/t/subobj-clean-lt-pr10697.sh b/t/subobj-clean-lt-pr10697.sh
index 4ac4630..6cbc021 100755
--- a/t/subobj-clean-lt-pr10697.sh
+++ b/t/subobj-clean-lt-pr10697.sh
@@ -117,9 +117,9 @@ $MAKE mostlyclean
ls -l . sub1 sub2
for i in 1 2; do
for j in a b c d e f; do
- test ! -f sub$i/$j.o
- test ! -f sub$i/$j.obj
- test ! -f sub$i/$j.lo
+ test ! -e sub$i/$j.o
+ test ! -e sub$i/$j.obj
+ test ! -e sub$i/$j.lo
test -f sub$i/$j.c || exit 99 # Sanity check
done
done
@@ -153,14 +153,14 @@ test -f sub2/a.$OBJEXT
# ... but they get removed by "make mostlyclean" ...
$MAKE mostlyclean
-test ! -f sub1/a.$OBJEXT
-test ! -f sub2/d.$OBJEXT
+test ! -e sub1/a.$OBJEXT
+test ! -e sub2/d.$OBJEXT
# ... and do not get rebuilt ...
$MAKE clean
$MAKE all
-test ! -f sub1/a.$OBJEXT
-test ! -f sub2/d.$OBJEXT
+test ! -e sub1/a.$OBJEXT
+test ! -e sub2/d.$OBJEXT
# ... while the non-stale files do.
test -f sub1/b.$OBJEXT
diff --git a/t/subobj-clean-pr10697.sh b/t/subobj-clean-pr10697.sh
index ff419d2..e7be1c5 100755
--- a/t/subobj-clean-pr10697.sh
+++ b/t/subobj-clean-pr10697.sh
@@ -113,8 +113,8 @@ $MAKE mostlyclean
ls -l . sub1 sub2
for i in 1 2; do
for j in a b c d e f; do
- test ! -f sub$i/$j.o
- test ! -f sub$i/$j.obj
+ test ! -e sub$i/$j.o
+ test ! -e sub$i/$j.obj
test -f sub$i/$j.c || exit 99 # Sanity check
done
done
@@ -148,14 +148,14 @@ test -f sub2/a.$OBJEXT
# ... but they get removed by "make mostlyclean" ...
$MAKE mostlyclean
-test ! -f sub1/a.$OBJEXT
-test ! -f sub2/d.$OBJEXT
+test ! -e sub1/a.$OBJEXT
+test ! -e sub2/d.$OBJEXT
# ... and do not get rebuilt ...
$MAKE clean
$MAKE all
-test ! -f sub1/a.$OBJEXT
-test ! -f sub2/d.$OBJEXT
+test ! -e sub1/a.$OBJEXT
+test ! -e sub2/d.$OBJEXT
# ... while the non-stale files do.
test -f sub1/b.$OBJEXT
diff --git a/t/subpkg-yacc.sh b/t/subpkg-yacc.sh
index 3d107cf..0ce1a7c 100755
--- a/t/subpkg-yacc.sh
+++ b/t/subpkg-yacc.sh
@@ -120,7 +120,7 @@ cd ..
$MAKE dist
test -f lib-dist-hook-has-run
test -f subpack-1.tar.gz
-test ! -d subpack-1 # Make sure "dist" cleans up after itself.
+test ! -e subpack-1 # Make sure "dist" cleans up after itself.
rm -f lib-dist-hook-has-run subpack-1.tar.gz
diff --git a/t/subpkg.sh b/t/subpkg.sh
index 72fcb0a..c8ce125 100755
--- a/t/subpkg.sh
+++ b/t/subpkg.sh
@@ -107,7 +107,7 @@ cd ..
./configure
$MAKE
$MAKE distcheck
-test ! -d subpack-1 # Make sure distcheck cleans up after itself.
+test ! -e subpack-1 # Make sure distcheck cleans up after itself.
test -f subpack-1.tar.gz
:
diff --git a/t/suffix3.tap b/t/suffix3.tap
index 2498ae1..15c562d 100755
--- a/t/suffix3.tap
+++ b/t/suffix3.tap
@@ -77,6 +77,6 @@ done
# Intermediate files should not be distributed.
command_ok_ "make distdir" $MAKE distdir
-command_ok_ "intermediate file not distributed" test ! -r $me-1.0/foo.cc
+command_ok_ "intermediate file not distributed" test ! -e $me-1.0/foo.cc
:
diff --git a/t/symlink2.sh b/t/symlink2.sh
index 930b107..f1f9dc5 100755
--- a/t/symlink2.sh
+++ b/t/symlink2.sh
@@ -27,6 +27,6 @@ $ACLOCAL
$AUTOMAKE --add-missing
test -f install-sh
-test ! -r Zardoz
+test ! -e Zardoz
:
diff --git a/t/tagsub.sh b/t/tagsub.sh
index 9b3fe47..9103805 100755
--- a/t/tagsub.sh
+++ b/t/tagsub.sh
@@ -42,5 +42,7 @@ $FGREP sub/TAGS TAGS
$FGREP iguana.h sub/TAGS
$MAKE distclean
-test ! -f sub/TAGS
-test ! -f TAGS
+test ! -e sub/TAGS
+test ! -e TAGS
+
+:
diff --git a/t/tap-basic.sh b/t/tap-basic.sh
index b3b79de..4781ce5 100755
--- a/t/tap-basic.sh
+++ b/t/tap-basic.sh
@@ -132,7 +132,7 @@ cat stdout
count_test_results total=1 pass=0 fail=0 xpass=0 xfail=0 skip=0 error=1
-test ! -f success.log
+test ! -e success.log
test -f bail.log
test -f test-suite.log
@@ -153,8 +153,8 @@ count_test_results total=3 pass=1 fail=0 xpass=0 xfail=1
skip=1 error=0
test -f ok.test
test -f ok.log
-test ! -f success.log
-test ! -f bail.log
+test ! -e success.log
+test ! -e bail.log
test -f test-suite.log
$EGREP '(bail|success)\.test' stdout && exit 1
diff --git a/t/tap-log.sh b/t/tap-log.sh
index 4a4f7e6..32cb475 100755
--- a/t/tap-log.sh
+++ b/t/tap-log.sh
@@ -87,8 +87,8 @@ chmod a+x *.test
TEST_SUITE_LOG=my.log $MAKE -e check && exit 1
ls -l # For debugging.
-test ! -f test-suite.log
-test ! -f global.log
+test ! -e test-suite.log
+test ! -e global.log
test -f my.log
st=0
for result in pass fail xfail xpass skip error; do
@@ -118,13 +118,13 @@ $FGREP 'error.test' my.log
touch error2.log test-suite.log global.log
TEST_SUITE_LOG=my.log $MAKE -e mostlyclean
ls -l # For debugging.
-test ! -f my.log
-test ! -f pass.log
-test ! -f fail.log
-test ! -f xfail.log
-test ! -f xpass.log
-test ! -f skip.log
-test ! -f error.log
+test ! -e my.log
+test ! -e pass.log
+test ! -e fail.log
+test ! -e xfail.log
+test ! -e xpass.log
+test ! -e skip.log
+test ! -e error.log
# "make mostlyclean" shouldn't remove unrelated log files.
test -f error2.log
test -f test-suite.log
@@ -135,8 +135,8 @@ rm -f *.log
VERBOSE=yes $MAKE check >stdout && { cat stdout; exit 1; }
cat stdout
cat global.log
-test ! -f my.log
-test ! -f test-suite.log
+test ! -e my.log
+test ! -e test-suite.log
# Check that VERBOSE causes the global testsuite log to be
# emitted on stdout.
out=$(cat stdout)
@@ -146,13 +146,13 @@ case $out in *"$log"*) ;; *) exit 1;; esac
touch error2.log test-suite.log my.log
$MAKE clean
ls -l # For debugging.
-test ! -f global.log
-test ! -f pass.log
-test ! -f fail.log
-test ! -f xfail.log
-test ! -f xpass.log
-test ! -f skip.log
-test ! -f error.log
+test ! -e global.log
+test ! -e pass.log
+test ! -e fail.log
+test ! -e xfail.log
+test ! -e xpass.log
+test ! -e skip.log
+test ! -e error.log
# "make clean" shouldn't remove unrelated log files.
test -f error2.log
test -f test-suite.log
diff --git a/t/tap-recheck.sh b/t/tap-recheck.sh
index 58118c4..877f70e 100755
--- a/t/tap-recheck.sh
+++ b/t/tap-recheck.sh
@@ -108,14 +108,14 @@ for vpath in : false; do
: A "make recheck" in a clean tree should run no tests.
do_recheck --pass
cat test-suite.log
- test ! -r a.run
- test ! -r a.log
- test ! -r b.run
- test ! -r b.log
- test ! -r c.run
- test ! -r c.log
- test ! -r d.run
- test ! -r d.log
+ test ! -e a.run
+ test ! -e a.log
+ test ! -e b.run
+ test ! -e b.log
+ test ! -e c.run
+ test ! -e c.log
+ test ! -e d.run
+ test ! -e d.log
count_test_results total=0 pass=0 fail=0 xpass=0 xfail=0 skip=0 error=0
: Run the tests for the first time.
@@ -134,7 +134,7 @@ for vpath in : false; do
do_recheck --fail
# a.test has been successful the first time, so no need to re-run it.
# Similar considerations apply to similar checks, below.
- test ! -r a.run
+ test ! -e a.run
test -f b.run
test -f c.run
test -f d.run
@@ -143,8 +143,8 @@ for vpath in : false; do
: Let us make the first part of c.test pass.
echo OK > c.pass
do_recheck --fail
- test ! -r a.run
- test ! -r b.run
+ test ! -e a.run
+ test ! -e b.run
test -f c.run
test -f d.run
count_test_results total=5 pass=1 fail=1 xpass=1 xfail=1 skip=1 error=0
@@ -152,8 +152,8 @@ for vpath in : false; do
: Let us make also the second part of c.test pass.
echo KO > c.xfail
do_recheck --fail
- test ! -r a.run
- test ! -r b.run
+ test ! -e a.run
+ test ! -e b.run
test -f c.run
test -f d.run
count_test_results total=5 pass=1 fail=1 xpass=0 xfail=2 skip=1 error=0
@@ -161,9 +161,9 @@ for vpath in : false; do
: Nothing changed, so only d.test should be run.
for i in 1 2; do
do_recheck --fail
- test ! -r a.run
- test ! -r b.run
- test ! -r c.run
+ test ! -e a.run
+ test ! -e b.run
+ test ! -e c.run
test -f d.run
count_test_results total=2 pass=0 fail=1 xpass=0 xfail=0 skip=1 error=0
done
@@ -183,9 +183,9 @@ for vpath in : false; do
echo 'Bail out!'
END
do_recheck --fail
- test ! -r a.run
- test ! -r b.run
- test ! -r c.run
+ test ! -e a.run
+ test ! -e b.run
+ test ! -e c.run
test -f d.run
count_test_results total=11 pass=2 fail=4 xpass=1 xfail=0 skip=2 error=2
@@ -193,18 +193,18 @@ END
echo 'test_count=1' > d.count
echo : > d.extra
do_recheck --pass
- test ! -r a.run
- test ! -r b.run
- test ! -r c.run
+ test ! -e a.run
+ test ! -e b.run
+ test ! -e c.run
test -f d.run
count_test_results total=1 pass=0 fail=0 xpass=0 xfail=0 skip=1 error=0
: All tests have been successful or skipped, nothing should be re-run.
do_recheck --pass
- test ! -r a.run
- test ! -r b.run
- test ! -r c.run
- test ! -r d.run
+ test ! -e a.run
+ test ! -e b.run
+ test ! -e c.run
+ test ! -e d.run
count_test_results total=0 pass=0 fail=0 xpass=0 xfail=0 skip=0 error=0
cd $srcdir
diff --git a/t/test-driver-custom-multitest-recheck.sh
b/t/test-driver-custom-multitest-recheck.sh
index d1b4e5c..ae31397 100755
--- a/t/test-driver-custom-multitest-recheck.sh
+++ b/t/test-driver-custom-multitest-recheck.sh
@@ -109,14 +109,14 @@ for vpath in : false; do
: A "make recheck" in a clean tree should run no tests.
do_recheck --pass
cat test-suite.log
- test ! -r a.run
- test ! -r a.log
- test ! -r b.run
- test ! -r b.log
- test ! -r c.run
- test ! -r c.log
- test ! -r d.run
- test ! -r d.log
+ test ! -e a.run
+ test ! -e a.log
+ test ! -e b.run
+ test ! -e b.log
+ test ! -e c.run
+ test ! -e c.log
+ test ! -e d.run
+ test ! -e d.log
count_test_results total=0 pass=0 fail=0 xpass=0 xfail=0 skip=0 error=0
: Run the tests for the first time.
@@ -135,7 +135,7 @@ for vpath in : false; do
do_recheck --fail
# a.test has been successful the first time, so no need to re-run it.
# Similar considerations apply to similar checks, below.
- test ! -r a.run
+ test ! -e a.run
test -f b.run
test -f c.run
test -f d.run
@@ -144,8 +144,8 @@ for vpath in : false; do
: Let us make the first part of c.test pass.
echo OK > c.pass
do_recheck --fail
- test ! -r a.run
- test ! -r b.run
+ test ! -e a.run
+ test ! -e b.run
test -f c.run
test -f d.run
count_test_results total=5 pass=1 fail=1 xpass=1 xfail=1 skip=1 error=0
@@ -153,8 +153,8 @@ for vpath in : false; do
: Let us make also the second part of c.test pass.
echo KO > c.xfail
do_recheck --fail
- test ! -r a.run
- test ! -r b.run
+ test ! -e a.run
+ test ! -e b.run
test -f c.run
test -f d.run
count_test_results total=5 pass=1 fail=1 xpass=0 xfail=2 skip=1 error=0
@@ -162,9 +162,9 @@ for vpath in : false; do
: Nothing changed, so only d.test should be run.
for i in 1 2; do
do_recheck --fail
- test ! -r a.run
- test ! -r b.run
- test ! -r c.run
+ test ! -e a.run
+ test ! -e b.run
+ test ! -e c.run
test -f d.run
count_test_results total=2 pass=0 fail=1 xpass=0 xfail=0 skip=1 error=0
done
@@ -183,27 +183,27 @@ for vpath in : false; do
echo ERROR: e 2
END
do_recheck --fail
- test ! -r a.run
- test ! -r b.run
- test ! -r c.run
+ test ! -e a.run
+ test ! -e b.run
+ test ! -e c.run
test -f d.run
count_test_results total=11 pass=2 fail=4 xpass=1 xfail=0 skip=2 error=2
: Let us finally make d.test pass.
echo : > d.extra
do_recheck --pass
- test ! -r a.run
- test ! -r b.run
- test ! -r c.run
+ test ! -e a.run
+ test ! -e b.run
+ test ! -e c.run
test -f d.run
count_test_results total=1 pass=0 fail=0 xpass=0 xfail=0 skip=1 error=0
: All tests have been successful or skipped, nothing should be re-run.
do_recheck --pass
- test ! -r a.run
- test ! -r b.run
- test ! -r c.run
- test ! -r d.run
+ test ! -e a.run
+ test ! -e b.run
+ test ! -e c.run
+ test ! -e d.run
count_test_results total=0 pass=0 fail=0 xpass=0 xfail=0 skip=0 error=0
cd $srcdir
diff --git a/t/test-driver-custom-multitest-recheck2.sh
b/t/test-driver-custom-multitest-recheck2.sh
index 9d8a233..623cbad 100755
--- a/t/test-driver-custom-multitest-recheck2.sh
+++ b/t/test-driver-custom-multitest-recheck2.sh
@@ -98,9 +98,9 @@ for vpath in : false; do
env "$var=" $MAKE -e recheck >stdout || { cat stdout; exit 1; }
cat stdout
count_test_results total=0 pass=0 fail=0 xpass=0 xfail=0 skip=0 error=0
- test ! -r a.run
- test ! -r b.run
- test ! -r c.run
+ test ! -e a.run
+ test ! -e b.run
+ test ! -e c.run
done
unset var
@@ -109,18 +109,18 @@ for vpath in : false; do
|| { cat stdout; exit 1; }
cat stdout
count_test_results total=0 pass=0 fail=0 xpass=0 xfail=0 skip=0 error=0
- test ! -r a.run
- test ! -r b.run
- test ! -r c.run
+ test ! -e a.run
+ test ! -e b.run
+ test ! -e c.run
: b.test failed, it should be re-run. And make it pass this time.
echo OK > b.ok
TEST_LOGS=b.log $MAKE -e recheck >stdout \
|| { cat stdout; exit 1; }
cat stdout
- test ! -r a.run
+ test ! -e a.run
test -f b.run
- test ! -r c.run
+ test ! -e c.run
count_test_results total=2 pass=0 fail=0 xpass=0 xfail=1 skip=1 error=0
rm -f *.run
@@ -130,16 +130,16 @@ for vpath in : false; do
|| { cat stdout; exit 1; }
cat stdout
count_test_results total=0 pass=0 fail=0 xpass=0 xfail=0 skip=0 error=0
- test ! -r a.run
- test ! -r b.run
- test ! -r c.run
+ test ! -e a.run
+ test ! -e b.run
+ test ! -e c.run
TESTS='a.test b.test' $MAKE -e recheck >stdout \
|| { cat stdout; exit 1; }
cat stdout
count_test_results total=0 pass=0 fail=0 xpass=0 xfail=0 skip=0 error=0
- test ! -r a.run
- test ! -r b.run
- test ! -r c.run
+ test ! -e a.run
+ test ! -e b.run
+ test ! -e c.run
: No need to re-run a.test anymore, but c.test should be rerun,
: as it contained an XPASS. And this time, make it fail with
@@ -149,8 +149,8 @@ for vpath in : false; do
&& { cat stdout; exit 1; }
cat stdout
count_test_results total=1 pass=0 fail=0 xpass=0 xfail=0 skip=0 error=1
- test ! -r a.run
- test ! -r b.run
+ test ! -e a.run
+ test ! -e b.run
test -f c.run
rm -f *.run *.err
@@ -163,8 +163,8 @@ for vpath in : false; do
|| { cat stdout; exit 1; }
cat stdout
count_test_results total=1 pass=1 fail=0 xpass=0 xfail=0 skip=0 error=0
- test ! -r a.run
- test ! -r b.run
+ test ! -e a.run
+ test ! -e b.run
test -f c.run
rm -f *.run *.err *.ok
@@ -174,9 +174,9 @@ for vpath in : false; do
$MAKE recheck >stdout || { cat stdout; exit 1; }
cat stdout
count_test_results total=0 pass=0 fail=0 xpass=0 xfail=0 skip=0 error=0
- test ! -r a.run
- test ! -r b.run
- test ! -r c.run
+ test ! -e a.run
+ test ! -e b.run
+ test ! -e c.run
cd $srcdir
diff --git a/t/test-driver-custom.sh b/t/test-driver-custom.sh
index 714f058..f8306ff 100755
--- a/t/test-driver-custom.sh
+++ b/t/test-driver-custom.sh
@@ -124,8 +124,8 @@ $MAKE
VERBOSE=yes $MAKE check
ls -l . sub
-test ! -r BAD.log
-test ! -r BAD.trs
+test ! -e BAD.log
+test ! -e BAD.trs
echo 'chk-wrapper 1.chk --am-chk --chk' > 1.exp
echo 'test-wrapper 2.test -am-test -test' > 2.exp
diff --git a/t/test-driver-fail.sh b/t/test-driver-fail.sh
index fed309e..10a4b1e 100755
--- a/t/test-driver-fail.sh
+++ b/t/test-driver-fail.sh
@@ -46,7 +46,7 @@ $AUTOMAKE
# The testsuite driver does not exist.
$MAKE check && exit 1
-test ! -f test-suite.log
+test ! -e test-suite.log
# The testsuite driver exists and create the test log files, but fails.
@@ -59,6 +59,6 @@ END
chmod a+x oops
$MAKE check && exit 1
-test ! -f test-suite.log
+test ! -e test-suite.log
:
diff --git a/t/test-log.sh b/t/test-log.sh
index b622ee7..0ae77b3 100755
--- a/t/test-log.sh
+++ b/t/test-log.sh
@@ -90,8 +90,8 @@ $AUTOMAKE -a
TEST_SUITE_LOG=my.log $MAKE -e check && exit 1
ls -l # For debugging.
-test ! -f test-suite.log
-test ! -f global.log
+test ! -e test-suite.log
+test ! -e global.log
test -f my.log
st=0
for result in pass fail xfail xpass skip error; do
@@ -132,13 +132,13 @@ have_rst_section 'ERROR: error' my.log
touch error2.log test-suite.log global.log
TEST_SUITE_LOG=my.log $MAKE -e mostlyclean
ls -l # For debugging.
-test ! -f my.log
-test ! -f pass.log
-test ! -f fail.log
-test ! -f xfail.log
-test ! -f xpass.log
-test ! -f skip.log
-test ! -f error.log
+test ! -e my.log
+test ! -e pass.log
+test ! -e fail.log
+test ! -e xfail.log
+test ! -e xpass.log
+test ! -e skip.log
+test ! -e error.log
# "make mostlyclean" shouldn't remove unrelated log files.
test -f error2.log
test -f test-suite.log
@@ -149,8 +149,8 @@ rm -f *.log
VERBOSE=yes $MAKE check >stdout && { cat stdout; exit 1; }
cat stdout
cat global.log
-test ! -f my.log
-test ! -f test-suite.log
+test ! -e my.log
+test ! -e test-suite.log
# Check that VERBOSE causes the global testsuite log to be
# emitted on stdout.
out=$(cat stdout)
@@ -160,13 +160,13 @@ case $out in *"$log"*) ;; *) exit 1;; esac
touch error2.log test-suite.log my.log
$MAKE clean
ls -l # For debugging.
-test ! -f global.log
-test ! -f pass.log
-test ! -f fail.log
-test ! -f xfail.log
-test ! -f xpass.log
-test ! -f skip.log
-test ! -f error.log
+test ! -e global.log
+test ! -e pass.log
+test ! -e fail.log
+test ! -e xfail.log
+test ! -e xpass.log
+test ! -e skip.log
+test ! -e error.log
# "make clean" shouldn't remove unrelated log files.
test -f error2.log
test -f test-suite.log
diff --git a/t/test-missing.sh b/t/test-missing.sh
index 441a838..7cf1d52 100755
--- a/t/test-missing.sh
+++ b/t/test-missing.sh
@@ -42,19 +42,19 @@ cat output
test -f ok.log
grep '^PASS: ok\.test' output
$FGREP 'zardoz.log' output
-test ! -f test-suite.log
+test ! -e test-suite.log
TESTS='zardoz2.test' $MAKE -e check >output 2>&1 \
&& { cat output; exit 1; }
cat output
$FGREP 'zardoz2.log' output
-test ! -f test-suite.log
+test ! -e test-suite.log
TEST_LOGS='zardoz3.log' $MAKE -e check >output 2>&1 \
&& { cat output; exit 1; }
cat output
$FGREP 'zardoz3.log' output
-test ! -f test-suite.log
+test ! -e test-suite.log
# The errors should persist even after 'test-suite.log'
# has been created.
@@ -66,6 +66,6 @@ rm -f zardoz.test
$MAKE check >output 2>&1 && { cat output; exit 1; }
cat output
$FGREP 'zardoz.log' output
-test ! -f test-suite.log
+test ! -e test-suite.log
:
diff --git a/t/test-missing2.sh b/t/test-missing2.sh
index 7592073..e08bf2d 100755
--- a/t/test-missing2.sh
+++ b/t/test-missing2.sh
@@ -37,10 +37,10 @@ $AUTOMAKE -a
./configure
$MAKE foobar1.log foobar2.log || exit 99
-test ! -f foobar1.log || exit 99
-test ! -f foobar1.trs || exit 99
-test ! -f foobar2.log || exit 99
-test ! -f foobar2.trs || exit 99
+test ! -e foobar1.log || exit 99
+test ! -e foobar1.trs || exit 99
+test ! -e foobar2.log || exit 99
+test ! -e foobar2.trs || exit 99
$MAKE check >output 2>&1 && { cat output; exit 1; }
cat output
@@ -48,6 +48,6 @@ grep 'test-suite\.log.*foobar1\.log' output
grep 'test-suite\.log.*foobar1\.trs' output
grep 'test-suite\.log.*foobar2\.log' output
grep 'test-suite\.log.*foobar2\.trs' output
-test ! -f test-suite.log
+test ! -e test-suite.log
:
diff --git a/t/test-trs-basic.sh b/t/test-trs-basic.sh
index 2a1c106..f0c30b8 100755
--- a/t/test-trs-basic.sh
+++ b/t/test-trs-basic.sh
@@ -92,9 +92,9 @@ test -f foo.trs
test -f bar.trs
test -f sub/zardoz.trs
$MAKE clean
-test ! -f foo.trs
-test ! -f bar.trs
-test ! -f sub/zardoz.trs
+test ! -e foo.trs
+test ! -e bar.trs
+test ! -e sub/zardoz.trs
# Unrelated '.trs' files shouldn't be removed.
test -f unrelated.trs
test -f sub/foo.trs
@@ -105,9 +105,9 @@ test -f foo.trs
test -f bar.trs
test -f sub/zardoz.trs
$MAKE mostlyclean
-test ! -f foo.trs
-test ! -f bar.trs
-test ! -f sub/zardoz.trs
+test ! -e foo.trs
+test ! -e bar.trs
+test ! -e sub/zardoz.trs
# Unrelated '.trs' files shouldn't be removed.
test -f unrelated.trs
test -f sub/foo.trs
@@ -118,18 +118,18 @@ test -f sub/foo.trs
TESTS=foo.test $MAKE -e check
test -f foo.trs
-test ! -f bar.trs
-test ! -f sub/zardoz.trs
+test ! -e bar.trs
+test ! -e sub/zardoz.trs
$MAKE clean
-test ! -f foo.trs
+test ! -e foo.trs
TESTS='foo.test bar.sh' $MAKE -e check
test -f foo.trs
test -f bar.trs
-test ! -f sub/zardoz.trs
+test ! -e sub/zardoz.trs
# "make clean" shouldn't remove '.trs' files for tests not in $(TESTS).
TESTS=bar.sh $MAKE -e clean
test -f foo.trs
-test ! -f bar.trs
+test ! -e bar.trs
$MAKE clean
@@ -138,20 +138,20 @@ $MAKE clean
#
TEST_LOGS=sub/zardoz.log $MAKE -e check
-test ! -f foo.trs
-test ! -f bar.trs
+test ! -e foo.trs
+test ! -e bar.trs
test -f sub/zardoz.trs
$MAKE clean
-test ! -f sub/zardoz.trs
+test ! -e sub/zardoz.trs
TEST_LOGS='foo.log bar.log' $MAKE -e check
test -f foo.trs
test -f bar.trs
-test ! -f sub/zardoz.trs
+test ! -e sub/zardoz.trs
# "make clean" shouldn't remove '.trs' files for tests whose log
# is not in $(TEST_LOGS).
TEST_LOGS=foo.log $MAKE -e clean
-test ! -f foo.trs
+test ! -e foo.trs
test -f bar.trs
-test ! -f sub/zardoz.trs
+test ! -e sub/zardoz.trs
:
diff --git a/t/test-trs-recover.sh b/t/test-trs-recover.sh
index 9235a1d..95a9ddc 100755
--- a/t/test-trs-recover.sh
+++ b/t/test-trs-recover.sh
@@ -53,21 +53,21 @@ $MAKE check
rm -f foo.trs bar.trs baz.trs
$MAKE foo.trs
test -f foo.trs
-test ! -f bar.trs
-test ! -f baz.trs
+test ! -e bar.trs
+test ! -e baz.trs
: Recreate by hand, several at the same time.
rm -f foo.trs bar.trs baz.trs
$MAKE foo.trs bar.trs
test -f foo.trs
test -f bar.trs
-test ! -f baz.trs
+test ! -e baz.trs
: Recreate by hand, with a failing test.
rm -f foo.trs bar.trs
TEST_STATUS=1 $MAKE bar.trs baz.trs >stdout || { cat stdout; exit 1; }
cat stdout
-test ! -f foo.trs
+test ! -e foo.trs
test -f bar.trs
test -f baz.trs
grep '^FAIL: bar\.test' stdout
@@ -97,15 +97,15 @@ grep '^PASS: baz\.test' stdout
rm -f foo.trs bar.trs baz.trs
TESTS=foo.test $MAKE -e check
test -f foo.trs
-test ! -f bar.trs
-test ! -f baz.trs
+test ! -e bar.trs
+test ! -e baz.trs
: Recreate with a "make check" with redefined TEST_LOGS.
rm -f foo.trs bar.trs baz.trs
TEST_LOGS=bar.log $MAKE -e check
-test ! -f foo.trs
+test ! -e foo.trs
test -f bar.trs
-test ! -f baz.trs
+test ! -e baz.trs
: Interactions with "make recheck" are OK.
rm -f foo.trs bar.trs baz.log baz.trs
@@ -113,8 +113,8 @@ $MAKE recheck >stdout || { cat stdout; exit 1; }
cat stdout
test -f foo.trs
test -f bar.trs
-test ! -f baz.trs
-test ! -f baz.log
+test ! -e baz.trs
+test ! -e baz.log
grep '^PASS: foo\.test' stdout
grep '^PASS: bar\.test' stdout
grep 'baz\.test' stdout && exit 1
diff --git a/t/test-trs-recover2.sh b/t/test-trs-recover2.sh
index ef231fc..b8e56b5 100755
--- a/t/test-trs-recover2.sh
+++ b/t/test-trs-recover2.sh
@@ -40,8 +40,7 @@ $AUTOMAKE -a
./configure
: > t
-chmod a-r t
-test ! -r t || exit 77
+chmod a-r t && test ! -r t || skip_ "you can still read unreadable files"
rm -f t
: Create the required log files.
diff --git a/t/txinfo13.sh b/t/txinfo13.sh
index 2f9938b..a98254c 100755
--- a/t/txinfo13.sh
+++ b/t/txinfo13.sh
@@ -61,5 +61,7 @@ cd build
../configure
$MAKE distcheck
test -f ../subdir/main.info
-test ! -f subdir/main.info
+test ! -e subdir/main.info
test -f ../subdir/main.info.bak
+
+:
diff --git a/t/txinfo16.sh b/t/txinfo16.sh
index f294bff..f4c1cee 100755
--- a/t/txinfo16.sh
+++ b/t/txinfo16.sh
@@ -47,11 +47,11 @@ cd build
../configure
$MAKE
test -f ../main.info
-test ! -f main.info
+test ! -e main.info
test -f ../stamp-vti
-test ! -f stamp-vti
+test ! -e stamp-vti
test -f ../version.texi
-test ! -f version.texi
+test ! -e version.texi
cd ..
rm -rf build make.info* stamp-vti version.texi
@@ -82,7 +82,7 @@ $MAKE
# stamp-vti is newer than version.texi, the 'version.texi: stamp-vti'
# rule is always triggered. Still that's not a reason for 'make'
# to think 'version.texi' has been created...
-test ! -f main.info
+test ! -e main.info
$MAKE dvi
test -f main.dvi
diff --git a/t/txinfo19.sh b/t/txinfo19.sh
index 011c655..71af13a 100755
--- a/t/txinfo19.sh
+++ b/t/txinfo19.sh
@@ -50,8 +50,8 @@ test -f _inst/main.i21
# They should be uninstalled too.
$MAKE uninstall
-test ! -f _inst/main.i1
-test ! -f _inst/main.i21
+test ! -e _inst/main.i1
+test ! -e _inst/main.i21
# Make sure rebuild rules erase old .iNN files when they run makeinfo.
$sleep
@@ -59,14 +59,14 @@ touch main.texi
test -f main.i1
test -f main.i21
$MAKE
-test ! -f main.i1
-test ! -f main.i21
+test ! -e main.i1
+test ! -e main.i21
# Finally, we also want them erased by maintainer-clean.
: > main.i7
: > main.i39
$MAKE maintainer-clean
-test ! -f main.i7
-test ! -f main.i39
+test ! -e main.i7
+test ! -e main.i39
:
diff --git a/t/txinfo20.sh b/t/txinfo20.sh
index 4add0c2..3d644f5 100755
--- a/t/txinfo20.sh
+++ b/t/txinfo20.sh
@@ -71,6 +71,8 @@ cp main.texi sub/main.texi
mv main.old main.texi
$MAKE && exit 1
test -f main
-test ! -f main-1
+test ! -e main-1
test -f sub/main
test -f sub/main-1
+
+:
diff --git a/t/txinfo21.sh b/t/txinfo21.sh
index 5ad1254..52474ad 100755
--- a/t/txinfo21.sh
+++ b/t/txinfo21.sh
@@ -100,9 +100,9 @@ $MAKE html
is_newest main.html main.texi
$MAKE clean
-test ! -d main.html
-test ! -d sub/main2.html
-test ! -d rec/main3.html
+test ! -e main.html
+test ! -e sub/main2.html
+test ! -e rec/main3.html
# Test production of a single HTML file.
MAKEINFOFLAGS=--no-split $MAKE -e html
@@ -110,9 +110,9 @@ test -f main.html
test -f sub/main2.html
test -f rec/main3.html
$MAKE clean
-test ! -f main.html
-test ! -f sub/main2.html
-test ! -f rec/main3.html
+test ! -e main.html
+test ! -e sub/main2.html
+test ! -e rec/main3.html
# Make sure AM_MAKEINFOHTMLFLAGS is supported, and override AM_MAKEINFO.
cat >>Makefile.am <<\EOF
@@ -127,27 +127,27 @@ test -f main.html
test -f sub/main2.html
test -d rec/main3.html
$MAKE clean
-test ! -f main.html
-test ! -f sub/main2.html
-test ! -d rec/main3.html
+test ! -e main.html
+test ! -e sub/main2.html
+test ! -e rec/main3.html
$MAKE install-html
test -f share/$me/html/main.html
test -f share/$me/html/main2.html
test -d share/$me/html/main3.html
$MAKE uninstall
-test ! -f share/$me/html/main.html
-test ! -f share/$me/html/main2.html
-test ! -d share/$me/html/main3.html
+test ! -e share/$me/html/main.html
+test ! -e share/$me/html/main2.html
+test ! -e share/$me/html/main3.html
$MAKE install-dvi
test -f share/$me/dvi/main.dvi
test -f share/$me/dvi/main2.dvi
test -f share/$me/dvi/main3.dvi
$MAKE uninstall
-test ! -f share/$me/dvi/main.dvi
-test ! -f share/$me/dvi/main2.dvi
-test ! -f share/$me/dvi/main3.dvi
+test ! -e share/$me/dvi/main.dvi
+test ! -e share/$me/dvi/main2.dvi
+test ! -e share/$me/dvi/main3.dvi
dvips --help || skip_ "dvips is missing"
@@ -156,9 +156,9 @@ test -f share/$me/ps/main.ps
test -f share/$me/ps/main2.ps
test -f share/$me/ps/main3.ps
$MAKE uninstall
-test ! -f share/$me/ps/main.ps
-test ! -f share/$me/ps/main2.ps
-test ! -f share/$me/ps/main3.ps
+test ! -e share/$me/ps/main.ps
+test ! -e share/$me/ps/main2.ps
+test ! -e share/$me/ps/main3.ps
pdfetex --help || pdftex --help \
|| skip_ "pdftex and pdfetex are both missing"
@@ -169,9 +169,9 @@ test -f share/$me/pdf/main2.pdf
test -f share/$me/pdf/main3.pdf
test -f share/$me/pdf/hello
$MAKE uninstall
-test ! -f share/$me/pdf/main.pdf
-test ! -f share/$me/pdf/main2.pdf
-test ! -f share/$me/pdf/main3.pdf
-test ! -f share/$me/pdf/hello
+test ! -e share/$me/pdf/main.pdf
+test ! -e share/$me/pdf/main2.pdf
+test ! -e share/$me/pdf/main3.pdf
+test ! -e share/$me/pdf/hello
:
diff --git a/t/txinfo22.sh b/t/txinfo22.sh
index 3c2d70c..efde953 100755
--- a/t/txinfo22.sh
+++ b/t/txinfo22.sh
@@ -55,8 +55,8 @@ $ACLOCAL
$AUTOMAKE --add-missing
$AUTOCONF
-test ! -f texinfo.tex
-test ! -f aux1/texinfo.tex
+test ! -e texinfo.tex
+test ! -e aux1/texinfo.tex
test -f tex/texinfo.tex
./configure
diff --git a/t/txinfo23.sh b/t/txinfo23.sh
index ebf62b0..9e47a29 100755
--- a/t/txinfo23.sh
+++ b/t/txinfo23.sh
@@ -61,6 +61,6 @@ cd build
../configure
$MAKE distcheck
test -f subdir/main.info
-test ! -f ../subdir/main.info
+test ! -e ../subdir/main.info
:
diff --git a/t/txinfo24.sh b/t/txinfo24.sh
index c613bd6..af426d7 100755
--- a/t/txinfo24.sh
+++ b/t/txinfo24.sh
@@ -48,7 +48,7 @@ mkdir build
cd build
../configure
$MAKE
-test ! -f ../main.info
+test ! -e ../main.info
test -f main.info
cd ..
@@ -74,7 +74,7 @@ cd build
$MAKE
# main.info should be rebuilt in the current directory.
test -f main.info
-test ! -f ../main.info
+test ! -e ../main.info
$MAKE dvi
test -f main.dvi
diff --git a/t/txinfo25.sh b/t/txinfo25.sh
index 46dfc50..6eb1975 100755
--- a/t/txinfo25.sh
+++ b/t/txinfo25.sh
@@ -61,8 +61,8 @@ cd build
../configure
$MAKE
test -f main.info
-test ! -f ../main.info
-test ! -f other.info
+test ! -e ../main.info
+test ! -e other.info
test -f ../other.info
cd ..
@@ -101,7 +101,7 @@ $MAKE
# rule is always triggered. Still that's not a reason for 'make'
# to think 'version.texi' has been created...
test -f main.info
-test ! -f other.info
+test ! -e other.info
$MAKE dvi
test -f main.dvi
test -f other.dvi
diff --git a/t/txinfo26.sh b/t/txinfo26.sh
index cc88a6e..5401fc9 100755
--- a/t/txinfo26.sh
+++ b/t/txinfo26.sh
@@ -48,11 +48,6 @@ $MAKE distclean
abscwd=$(pwd) || fatal_ "getting current working directory"
-case $abscwd in
- *\ * | *\ *)
- skip_ "this test might fail in a directory containing white spaces";;
-esac
-
mkdir build
cd build
../configure --srcdir="$abscwd" \
@@ -62,12 +57,14 @@ cd build
$MAKE install
test -f ../main.info
-test ! -f ./main.info
+test ! -e ./main.info
test -f _inst/info/main.info
$MAKE uninstall
-test ! -f _inst/info/main.info
+test ! -e _inst/info/main.info
test -f ../main.info
# Multiple uninstall should not fail.
$MAKE uninstall
+
+:
diff --git a/t/txinfo28.sh b/t/txinfo28.sh
index 9bcf6e2..f9517fb 100755
--- a/t/txinfo28.sh
+++ b/t/txinfo28.sh
@@ -82,7 +82,7 @@ cd build
$MAKE
# main.info should be rebuilt in the current directory.
test -f main.info
-test ! -f ../main.info
+test ! -e ../main.info
$MAKE dvi
test -f main.dvi
diff --git a/t/txinfo33.sh b/t/txinfo33.sh
index b457cb0..037400f 100755
--- a/t/txinfo33.sh
+++ b/t/txinfo33.sh
@@ -103,20 +103,20 @@ test -f sub/another.ps
$MAKE clean
-test ! -f main.dvi
-test ! -f main.ps
-test ! -f main.html && test ! -d main.html
-test ! -f main.pdf
-test ! -f other.pdf
-test ! -f sub/another.pdf
-test ! -f sub/yetanother.pdf
-
-test ! -f other.dvi
-test ! -f other.html && test ! -d other.html
-test ! -f other.ps
-test ! -f sub/another.dvi
-test ! -f sub/another.html && test ! -d sub/another.html
-test ! -f sub/another.ps
+test ! -e main.dvi
+test ! -e main.ps
+test ! -e main.html
+test ! -e main.pdf
+test ! -e other.pdf
+test ! -e sub/another.pdf
+test ! -e sub/yetanother.pdf
+
+test ! -e other.dvi
+test ! -e other.html
+test ! -e other.ps
+test ! -e sub/another.dvi
+test ! -e sub/another.html
+test ! -e sub/another.ps
./configure
$MAKE
diff --git a/t/uninstall-pr9578.sh b/t/uninstall-pr9578.sh
index 6d852c4..cb870b3 100755
--- a/t/uninstall-pr9578.sh
+++ b/t/uninstall-pr9578.sh
@@ -43,25 +43,25 @@ $AUTOCONF
./configure --prefix="$(pwd)/inst"
$MAKE uninstall
-test ! -d inst
+test ! -e inst
rm -rf inst
$MAKE install-exec
test -f inst/bin/foo || exit 99 # Sanity check.
$MAKE uninstall
-test ! -f inst/bin/foo
+test ! -e inst/bin/foo
$MAKE install-data
test -f inst/share/bar || exit 99 # Sanity check.
$MAKE uninstall
-test ! -f inst/share/bar
+test ! -e inst/share/bar
rm -rf inst
$MAKE install-exec
test -f inst/bin/foo || exit 99 # Sanity check.
$MAKE uninstall
-test ! -f inst/bin/foo
+test ! -e inst/bin/foo
:
diff --git a/t/vala-headers.sh b/t/vala-headers.sh
index c86c4e6..48dbf81 100755
--- a/t/vala-headers.sh
+++ b/t/vala-headers.sh
@@ -82,6 +82,6 @@ for h in $headers; do test -f $h; done
$MAKE distcheck
$MAKE maintainer-clean
-for h in $headers; do test ! -f $h; done
+for h in $headers; do test ! -e $h; done
:
diff --git a/t/vala-parallel.sh b/t/vala-parallel.sh
index 3b659a8..d03080d 100755
--- a/t/vala-parallel.sh
+++ b/t/vala-parallel.sh
@@ -54,8 +54,8 @@ test -f zardoz_vala.stamp
$MAKE maintainer-clean -j4
ls -l # For debugging.
-for x in main 1 2 3 4 5 6; do test ! -f $x.c; done
-test ! -f zardoz_vala.stamp
+for x in main 1 2 3 4 5 6; do test ! -e $x.c; done
+test ! -e zardoz_vala.stamp
mkdir build
cd build
@@ -68,7 +68,7 @@ test -f ../zardoz_vala.stamp
$MAKE distcheck -j4
$MAKE maintainer-clean -j2
-for x in main 1 2 3 4 5 6; do test ! -f ../$x.c; done
-test ! -f ../zardoz_vala.stamp
+for x in main 1 2 3 4 5 6; do test ! -e ../$x.c; done
+test ! -e ../zardoz_vala.stamp
:
diff --git a/t/vala-vpath.sh b/t/vala-vpath.sh
index 9a7ff76..9874f68 100755
--- a/t/vala-vpath.sh
+++ b/t/vala-vpath.sh
@@ -83,9 +83,9 @@ test -f ../bar_vala.stamp
test -f ../zardoz.h
test -f ../hello.c
$MAKE maintainer-clean
-test ! -f ../zardoz.h
-test ! -f ../hello.c
-test ! -f ../foo_vala.stamp
-test ! -f ../bar_vala.stamp
+test ! -e ../zardoz.h
+test ! -e ../hello.c
+test ! -e ../foo_vala.stamp
+test ! -e ../bar_vala.stamp
:
diff --git a/t/vala3.sh b/t/vala3.sh
index 4818150..d9ecdea 100755
--- a/t/vala3.sh
+++ b/t/vala3.sh
@@ -58,8 +58,8 @@ test -f src/zardoz.c
test -f src_zardoz_vala.stamp
$MAKE distcheck
$MAKE maintainer-clean
-test ! -f src/zardoz.c
-test ! -f src_zardoz_vala.stamp
+test ! -e src/zardoz.c
+test ! -e src_zardoz_vala.stamp
mkdir build
cd build
diff --git a/t/vala5.sh b/t/vala5.sh
index 3c55cf1..bc29346 100755
--- a/t/vala5.sh
+++ b/t/vala5.sh
@@ -97,7 +97,7 @@ mv config.sav config.status
./config.status
$MAKE maintainer-clean
-test ! -f src/xfoo.c
-test ! -f src/xbar.c
+test ! -e src/xfoo.c
+test ! -e src/xbar.c
:
diff --git a/t/yacc-auxdir.sh b/t/yacc-auxdir.sh
index 0643edc..eb7357d 100755
--- a/t/yacc-auxdir.sh
+++ b/t/yacc-auxdir.sh
@@ -47,8 +47,8 @@ END
$ACLOCAL
$AUTOMAKE -a
test -f aux1/ylwrap
-test ! -f ylwrap
-test ! -f sub/ylwrap
+test ! -e ylwrap
+test ! -e sub/ylwrap
grep -i 'ylwrap' Makefile.in sub/Makefile.in # For debugging.
$FGREP '$(top_srcdir)/aux1/ylwrap' Makefile.in
$FGREP '$(top_srcdir)/aux1/ylwrap' sub/Makefile.in
diff --git a/t/yacc-basic.sh b/t/yacc-basic.sh
index 520533e..4835235 100755
--- a/t/yacc-basic.sh
+++ b/t/yacc-basic.sh
@@ -102,7 +102,7 @@ test -f bar-parse.c
./configure # We must re-create 'Makefile'.
$MAKE maintainer-clean
ls -l
-test ! -f parse.c
-test ! -f bar-parse.c
+test ! -e parse.c
+test ! -e bar-parse.c
:
diff --git a/t/yacc-clean-cxx.sh b/t/yacc-clean-cxx.sh
index 68b7b1f..20d04d1 100755
--- a/t/yacc-clean-cxx.sh
+++ b/t/yacc-clean-cxx.sh
@@ -126,20 +126,20 @@ for target in clean distclean; do
ls -l . sub1 sub2
test -f sub1/parsefoo.cxx
test -f sub1/bar-parsebar.cc
- test ! -r sub1/parsebaz.y++
- test ! -r sub1/parsebaz.c++
- test ! -r sub1/parsequx.ypp
- test ! -r sub1/qux-parsequx.cpp
+ test ! -e sub1/parsebaz.y++
+ test ! -e sub1/parsebaz.c++
+ test ! -e sub1/parsequx.ypp
+ test ! -e sub1/qux-parsequx.cpp
test -f sub2/parsefoo.cxx
test -f sub2/parsefoo.hxx
test -f sub2/bar-parsebar.cc
test -f sub2/bar-parsebar.hh
- test ! -r sub2/parsebaz.y++
- test ! -r sub2/parsebaz.c++
- test ! -r sub2/parsebaz.h++
- test ! -r sub2/parsequx.ypp
- test ! -r sub2/qux-parsequx.cpp
- test ! -r sub2/qux-parsequx.hpp
+ test ! -e sub2/parsebaz.y++
+ test ! -e sub2/parsebaz.c++
+ test ! -e sub2/parsebaz.h++
+ test ! -e sub2/parsequx.ypp
+ test ! -e sub2/qux-parsequx.cpp
+ test ! -e sub2/qux-parsequx.hpp
done
cp config.sav config.status
@@ -149,16 +149,13 @@ $MAKE maintainer-clean
ls -l . sub1 sub2
test -f sub1/parsefoo.yxx
test -f sub1/parsebar.yy
-test ! -r sub1/parsefoo.cxx
-test ! -r sub1/bar-parsebar.cc
+test ! -e sub1/parsefoo.cxx
+test ! -e sub1/bar-parsebar.cc
test -f sub2/parsefoo.yxx
test -f sub2/parsebar.yy
-test ! -r sub2/parsefoo.cxx
-test ! -r sub2/parsefoo.hxx
-test ! -r sub2/bar-parsebar.cc
-test ! -r sub2/bar-parsebar.hh
-
-cp config.sav config.status
-./config.status # re-create Makefile
+test ! -e sub2/parsefoo.cxx
+test ! -e sub2/parsefoo.hxx
+test ! -e sub2/bar-parsebar.cc
+test ! -e sub2/bar-parsebar.hh
:
diff --git a/t/yacc-clean.sh b/t/yacc-clean.sh
index cddd159..07b3b79 100755
--- a/t/yacc-clean.sh
+++ b/t/yacc-clean.sh
@@ -115,19 +115,19 @@ for target in clean distclean; do
test -f sub1/parse.y
test -f sub1/parse.c
test -f sub1/bar-parse.c
- test ! -r sub1/baz.y
- test ! -r sub1/baz.c
- test ! -r sub1/qux-baz.c
+ test ! -e sub1/baz.y
+ test ! -e sub1/baz.c
+ test ! -e sub1/qux-baz.c
test -f sub2/parse.y
test -f sub2/parse.c
test -f sub2/parse.h
test -f sub2/bar-parse.c
test -f sub2/bar-parse.h
- test ! -r sub2/baz.y
- test ! -r sub2/baz.c
- test ! -r sub2/baz.h
- test ! -r sub2/qux-baz.c
- test ! -r sub2/qux-baz.h
+ test ! -e sub2/baz.y
+ test ! -e sub2/baz.c
+ test ! -e sub2/baz.h
+ test ! -e sub2/qux-baz.c
+ test ! -e sub2/qux-baz.h
done
cp config.sav config.status
@@ -136,12 +136,12 @@ cp config.sav config.status
$MAKE maintainer-clean
ls -l . sub1 sub2
test -f sub1/parse.y
-test ! -r sub1/parse.c
-test ! -r sub1/bar-parse.c
+test ! -e sub1/parse.c
+test ! -e sub1/bar-parse.c
test -f sub2/parse.y
-test ! -r sub2/parse.c
-test ! -r sub2/parse.h
-test ! -r sub2/bar-parse.c
-test ! -r sub2/bar-parse.h
+test ! -e sub2/parse.c
+test ! -e sub2/parse.h
+test ! -e sub2/bar-parse.c
+test ! -e sub2/bar-parse.h
:
diff --git a/t/yacc-cxx.sh b/t/yacc-cxx.sh
index 85f3ab5..24d5546 100755
--- a/t/yacc-cxx.sh
+++ b/t/yacc-cxx.sh
@@ -132,9 +132,9 @@ test -f foo4-parse4.cpp
./configure # Re-create 'Makefile'.
$MAKE maintainer-clean
ls -l
-test ! -f parse1.cc
-test ! -f parse2.c++
-test ! -f foo3-parse3.cxx
-test ! -f foo4-parse4.cpp
+test ! -e parse1.cc
+test ! -e parse2.c++
+test ! -e foo3-parse3.cxx
+test ! -e foo4-parse4.cpp
:
diff --git a/t/yacc-d-basic.sh b/t/yacc-d-basic.sh
index 868cd3e..91fbc62 100755
--- a/t/yacc-d-basic.sh
+++ b/t/yacc-d-basic.sh
@@ -144,11 +144,11 @@ test -f baz/zardoz-parse.c
test -f baz/zardoz-parse.h
./configure # Re-create 'Makefile'.
$MAKE maintainer-clean
-test ! -f foo/parse.c
-test ! -f foo/parse.h
-test ! -f bar/parse.c
-test ! -f bar/parse.h
-test ! -f baz/zardoz-parse.c
-test ! -f baz/zardoz-parse.h
+test ! -e foo/parse.c
+test ! -e foo/parse.h
+test ! -e bar/parse.c
+test ! -e bar/parse.h
+test ! -e baz/zardoz-parse.c
+test ! -e baz/zardoz-parse.h
:
diff --git a/t/yacc-d-cxx.sh b/t/yacc-d-cxx.sh
index 474a4ff..4165b68 100755
--- a/t/yacc-d-cxx.sh
+++ b/t/yacc-d-cxx.sh
@@ -220,13 +220,13 @@ test -f qux/maude-parse.cxx
test -f qux/maude-parse.hxx
./configure # Re-create 'Makefile'.
$MAKE maintainer-clean
-test ! -f foo/parse.cc
-test ! -f foo/parse.hh
-test ! -f bar/parse.cpp
-test ! -f bar/parse.hpp
-test ! -f baz/sub/parse.c++
-test ! -f baz/sub/parse.h++
-test ! -f qux/maude-parse.cxx
-test ! -f qux/maude-parse.hxx
+test ! -e foo/parse.cc
+test ! -e foo/parse.hh
+test ! -e bar/parse.cpp
+test ! -e bar/parse.hpp
+test ! -e baz/sub/parse.c++
+test ! -e baz/sub/parse.h++
+test ! -e qux/maude-parse.cxx
+test ! -e qux/maude-parse.hxx
:
diff --git a/t/yacc-deleted-headers.sh b/t/yacc-deleted-headers.sh
index 3c4bfd4..d522b8c 100755
--- a/t/yacc-deleted-headers.sh
+++ b/t/yacc-deleted-headers.sh
@@ -106,28 +106,28 @@ headers='parse1.h p2-parse2.h parse3.h parse4.h'
rm -f $headers
$MAKE parse1.h
test -f parse1.h
-test ! -r p2-parse2.h
-test ! -r parse3.h
-test ! -r parse4.h
+test ! -e p2-parse2.h
+test ! -e parse3.h
+test ! -e parse4.h
rm -f $headers
$MAKE p2-parse2.h
-test ! -r parse1.h
+test ! -e parse1.h
test -f p2-parse2.h
-test ! -r parse3.h
-test ! -r parse4.h
+test ! -e parse3.h
+test ! -e parse4.h
rm -f $headers
$MAKE parse3.h
-test ! -r parse1.h
-test ! -r p2-parse2.h
+test ! -e parse1.h
+test ! -e p2-parse2.h
test -f parse3.h
-test ! -r parse4.h
+test ! -e parse4.h
# Since we declared parse3.h into $(p3_SOURCES), make should be
# able to rebuild it automatically before remaking 'p3'.
rm -f $headers
$MAKE clean-p3
-test ! -f parse3.h # Sanity check.
+test ! -e parse3.h # Sanity check.
$MAKE build-p3
test -f parse3.h
@@ -135,9 +135,9 @@ $MAKE
rm -f $headers
$MAKE parse4.h
-test ! -r parse1.h
-test ! -r p2-parse2.h
-test ! -r parse3.h
+test ! -e parse1.h
+test ! -e p2-parse2.h
+test ! -e parse3.h
test -f parse4.h
# Now remake all the headers together.
@@ -158,6 +158,6 @@ test -f p2-parse2.h
test -f parse3.h
# parse4.h is not declared in any *_SOURCES variable, nor #included
# by any C source file, so it shouldn't be rebuilt by "make all".
-test ! -r parse4.h
+test ! -e parse4.h
:
diff --git a/t/yacc-dist-nobuild-subdir.sh b/t/yacc-dist-nobuild-subdir.sh
index 850b027..0160c10 100755
--- a/t/yacc-dist-nobuild-subdir.sh
+++ b/t/yacc-dist-nobuild-subdir.sh
@@ -69,12 +69,12 @@ $MAKE distdir
test -f sub/parse.c
test -f sub/parse.h
test -f sub/bar-parse.c
-test ! -r sub/bar-parse.h
+test ! -e sub/bar-parse.h
test -f $distdir/sub/parse.c
test -f $distdir/sub/parse.h
test -f $distdir/sub/bar-parse.c
-test ! -r $distdir/sub/bar-parse.h
+test ! -e $distdir/sub/bar-parse.h
# But they shouldn't be rebuilt in VPATH builds.
diff --git a/t/yacc-mix-c-cxx.sh b/t/yacc-mix-c-cxx.sh
index df7b8d9..fbc49d6 100755
--- a/t/yacc-mix-c-cxx.sh
+++ b/t/yacc-mix-c-cxx.sh
@@ -177,7 +177,7 @@ for try in 0 1; do
test -f p.c
test -f p.h
test -f c2-p.c
- test ! -r c2-p.h
+ test ! -e c2-p.h
test -f parse.cc
test -f parse.hh
@@ -185,8 +185,8 @@ for try in 0 1; do
test -f parse3.hxx
test -f cxx2-parse2.c++
- test ! -r parse2.h++
- test ! -r cxx2-parse2.h++
+ test ! -e parse2.h++
+ test ! -e cxx2-parse2.h++
# Minimal checks about recovering from header removal.
rm -f p.h parse.hh parse3.hxx
@@ -194,7 +194,7 @@ for try in 0 1; do
$debug_info
test -f p.h
test -f parse.hh
- test ! -r parse3.hxx
+ test ! -e parse3.hxx
$run_make
$debug_info
test -f parse3.hxx
diff --git a/t/yacc4.sh b/t/yacc4.sh
index 9a4de2a..a0e121f 100755
--- a/t/yacc4.sh
+++ b/t/yacc4.sh
@@ -80,7 +80,7 @@ test -f parse.c
# ... but maintainer-clean should.
../configure
$MAKE maintainer-clean
-test ! -f bar.c
-test ! -f parse.c
+test ! -e bar.c
+test ! -e parse.c
:
diff --git a/t/yacc7.sh b/t/yacc7.sh
index e1cb376..5d7be75 100755
--- a/t/yacc7.sh
+++ b/t/yacc7.sh
@@ -83,7 +83,7 @@ test -f foo.c
# ... but maintainer-clean should.
./configure # Re-create 'Makefile'.
$MAKE maintainer-clean
-test ! -f foo.h
-test ! -f foo.c
+test ! -e foo.h
+test ! -e foo.c
:
diff --git a/t/yaccdry.sh b/t/yaccdry.sh
index 326a8d9..8e5af56 100755
--- a/t/yaccdry.sh
+++ b/t/yaccdry.sh
@@ -53,6 +53,6 @@ $MAKE
rm -f parse.h
$MAKE -n parse.h
test -f parse.c
-test ! -f parse.h
+test ! -e parse.h
:
diff --git a/t/yflags-cmdline-override.sh b/t/yflags-cmdline-override.sh
index a164872..e53358a 100755
--- a/t/yflags-cmdline-override.sh
+++ b/t/yflags-cmdline-override.sh
@@ -69,7 +69,7 @@ ls -l
$MAKE
ls -l
test -f foo.c
-test ! -r foo.h
+test ! -e foo.h
test -f foo.output
$MAKE maintainer-clean
@@ -80,7 +80,7 @@ YFLAGS=-d $MAKE -e
ls -l
test -f foo.c
test -f foo.h
-test ! -r foo.output
+test ! -e foo.output
$MAKE maintainer-clean
ls -l
hooks/post-receive
--
GNU Automake
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Automake-commit] [SCM] GNU Automake branch, master, updated. v1.12.1-164-ge2f007f,
Stefano Lattarini <=