[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Bug-glpk] Memory allocation problem
From: |
Pietro Scionti |
Subject: |
[Bug-glpk] Memory allocation problem |
Date: |
Mon, 4 Jan 2010 10:35:41 +0100 |
Hi everyone,
I have been using GLPK for almost a year now to solve integer optimization
problems quite satisfactorily, but I'm now encountering a serious problem.
The model I'm trying to solve has 342 370 columns (variables are 3-dimensional,
in the form of 134 operators x 7 work shifts x 365 days), all of them binary,
and I fear an even bigger number of rows which I'm not able to count. When I
try to run GLPK (through command line) I get the following log:
GLPSOL: GLPK LP/MIP Solver 4.41
Parameter(s) specified in the command line:
-m agente.txt -d dati_agente.txt -o out_agente_mipgap100000.txt --mipgap
100000 --log log_mipgap100000.txt
Reading model section from agente.txt...
agente.txt:90: warning: final NL missing before end of file
90 lines were read
Reading data section from dati_agente.txt...
dati_agente.txt:24: warning: final NL missing before end of file
24 lines were read
Generating Turninelgiorno...
Generating RiposiFissiPrimi6Blocchi...
Generating RiposiFissiUltimoBlocco...
Generating FabbisogniTurniNotturniPerGiorno...
Generating NoNotturnoPrimaDiRiposo...
Generating StessiNotturniTraOperatori...
Generating StessiNotturniSingoliTraOperatori...
Generating StessiNotturniSingoliOgniOperatore...
Generating DistanzaMinimaTraNottiPerAgenti...
Generating assegnazioni...
Model has been successfully generated
xmalloc: no memory available
Error detected in file ..\src\glplib07.c at line 72
And a pop-up tells me that "The exception unknown software exception
(0x40000015) occurred in the application at location 0x10034999.". I'm not able
to debug this myself.
Note that this has been transcribed by me reading the prompt since that error
prevents the creation of the log itself.
I managed to make it work setting the days count to 49; 6 months gave me the
same treatment.
I got this both on a Pentium 4 2.40 GHz with 2 GB of RAM and on a Core2 Duo
E8400 3 GHz with 4 GB of RAM, running XP Professional SP 3.
Thanks
Pietro
PS: I think this is the right newsletter, but if you'd rather have me post it
on 'help' just tell me
Archimede S.r.l.
Sede Legale:
Via Manzoni, 82
Ponte S. Giovanni
Sede Operativa e Amministrativa:
Via Settevalli, 133/v
06128 Perugia
P.IVA: 01992020543
Tel. 075 515 22 11
Fax. 075 515 22 99
www.archinet.it
**********************************************************************************************************************************************************************************************************************
La presente comunicazione, con le informazioni in essa contenute e ogni
documento o file allegato, e' rivolta unicamente alla/e persona/e cui e'
indirizzata ed alle altre da questa autorizzata/e a riceverla. Se non siete i
destinatari/autorizzati siete avvisati che qualsiasi azione, copia,
comunicazione, divulgazione o simili basate sul contenuto di tali informazioni
e' vietata e potrebbe essere contro la legge (art. 616 C.P., D.Lgs n. 196/2003
Codice in materia di protezione dei dati personali). Se avete ricevuto questa
comunicazione per errore, vi preghiamo di darne immediata notizia al mittente e
di distruggere il messaggio originale e ogni file allegato senza farne copia
alcuna o riprodurne in alcun modo il contenuto.
This e-mail and its attachments are intended for the addressee(s) only and are
confidential and/or may contain legally privileged information. If you have
received this message by mistake or are not one of the addressees above, you
may take no action based on it, and you may not copy or show it to anyone;
please reply to this e-mail and point out the error which has occurred.
**********************************************************************************************************************************************************************************************************************
- [Bug-glpk] Memory allocation problem,
Pietro Scionti <=