[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Make file error. Please Help..
|
From: |
Ron de |
|
Subject: |
Make file error. Please Help.. |
|
Date: |
Thu, 30 Jan 2003 10:33:54 -0800 (PST) |
Hi there,
I downloaded m4(didn't knew that was the name of a
program)(for Cygwin) and now there are no errors
during the ./configure command. But when I do the
"make" command I get a few errors:
The following output is given:
MAKE Version 5.2 Copyright etc.
Error makefile 689: Colon expected
Error makefile 690: Command syntax error
Error makefile 693: Command syntax error
Error makefile 1090: Colon expected
***4 errors during make***
General System Information:
WIN98
newest Cygwin version
(not important at least that's what I think)
128 MB
700 MHz
I myself thought: if I just delete the . Then it
might work. Well, it worked, a bit then. The output of
the make is now a lot of code printed on my screen.
The program stops with a message of the MSDos-prompt
that there has been an error in a specific memory
address. It also states there are no interrupts in
use. How can this be fixed?
Then I yet have another question: How can I create a
library or someother object that I can use in Borland
C++ Builder 6? Probably, it will work when the make
command executes the right way, but that I am not
sure.
Regards, Ron de Bruijn
P.S. I added the Makefile.
# Makefile.in generated automatically by automake 1.5
from Makefile.am.
# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000,
2001
# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software
Foundation
# gives unlimited permission to copy and/or distribute
it,
# with or without modifications, as long as this
notice is preserved.
# This program is distributed in the hope that it will
be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by
law; without
# even the implied warranty of MERCHANTABILITY or
FITNESS FOR A
# PARTICULAR PURPOSE.
# Copyright 1991, 1993, 1994, 1996, 1997, 1999, 2000,
2001, 2002 Free
# Software Foundation, Inc.
#
# This file is part of the GNU MP Library.
#
# The GNU MP Library is free software; you can
redistribute it and/or modify
# it under the terms of the GNU Lesser General Public
License as published by
# the Free Software Foundation; either version 2.1 of
the License, or (at your
# option) any later version.
#
# The GNU MP Library is distributed in the hope that
it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public
# License for more details.
#
# You should have received a copy of the GNU Lesser
General Public License
# along with the GNU MP Library; see the file
COPYING.LIB. If not, write to
# the Free Software Foundation, Inc., 59 Temple Place
- Suite 330, Boston,
# MA 02111-1307, USA.
# Libtool -version-info for libgmp.la and libmp.la.
See "Versioning" in the
# libtool manual.
#
# 1. No interfaces changed, only implementations
(good): Increment REVISION.
#
# 2. Interfaces added, none removed (good): Increment
CURRENT, increment
# AGE, set REVISION to 0.
#
# 3. Interfaces removed (BAD, breaks upward
compatibility): Increment
# CURRENT, set AGE and REVISION to 0.
#
# Do this separately for libgmp and libmp, and only
for releases.
#
# GMP -version-info
# release libgmp libgmpxx libmp
# 2.0.x - - -
# 3.0 3:0:0 - 3:0:0
# 3.0.1 3:1:0 - 3:0:0
# 3.1 4:0:1 - 4:0:1
# 3.1.1 4:1:1 - 4:1:1
# 4.0 5:0:2 3:0:0 4:2:1
# 4.0.1 5:1:2 3:1:0 4:3:1
# 4.1 6:0:3 3:2:0 4:4:1
# 4.1.1 6:1:3 3:3:0 4:5:1
# 4.1.2 6:2:3 3:4:0 4:6:1
#
# Starting at 3:0:0 is a slight abuse of the
versioning system, but it
# ensures we're past soname libgmp.so.2, which was
used on Debian GNU/Linux
# packages of gmp 2. Pretend gmp 2 was 2:0:0, so the
interface changes for
# gmp 3 mean 3:0:0 is right.
SHELL = /bin/sh
srcdir = .
top_srcdir = .
prefix = /usr/local
exec_prefix = ${prefix}
bindir = ${exec_prefix}/bin
sbindir = ${exec_prefix}/sbin
libexecdir = ${exec_prefix}/libexec
datadir = ${prefix}/share
sysconfdir = ${prefix}/etc
sharedstatedir = ${prefix}/com
localstatedir = ${prefix}/var
libdir = ${exec_prefix}/lib
infodir = ${prefix}/info
mandir = ${prefix}/man
includedir = ${prefix}/include
oldincludedir = /usr/include
pkgdatadir = $(datadir)/gmp
pkglibdir = $(libdir)/gmp
pkgincludedir = $(includedir)/gmp
top_builddir = .
ACLOCAL = ${SHELL} /home/gmp/missing --run aclocal
AUTOCONF = ${SHELL} /home/gmp/missing --run autoconf
AUTOMAKE = ${SHELL} /home/gmp/missing --run automake
AUTOHEADER = ${SHELL} /home/gmp/missing --run
autoheader
INSTALL = /usr/bin/install -c
INSTALL_PROGRAM = ${INSTALL}
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_SCRIPT = ${INSTALL}
INSTALL_HEADER = $(INSTALL_DATA)
transform = s,x,x,
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_alias =
host_triplet = athlon-pc-cygwin
AMTAR = ${SHELL} /home/gmp/missing --run tar
AR = ar
AS = as
AWK = gawk
BITS_PER_MP_LIMB = 32
CALLING_CONVENTIONS_OBJS = x86call.lo x86check$U.lo
CC = gcc
CCAS = gcc -c
CPP = gcc -E
CXX =
CXXCPP =
DEFN_LONG_LONG_LIMB = /* #undef _LONG_LONG_LIMB */
DEPDIR = .deps
DLLTOOL = dlltool
ECHO = echo
EXEEXT = .exe
GCJ = @GCJ@
GCJFLAGS = @GCJFLAGS@
GMP_LDFLAGS = -no-undefined
GMP_NAIL_BITS = 0
HAVE_DECL_OPTARG = 0
HAVE_HOST_CPU_FAMILY_power = 0
HAVE_HOST_CPU_FAMILY_powerpc = 0
HAVE_MPFR_01 = 0
HAVE_STACK_T_01 = 0
INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
LEX = ${SHELL} /home/gmp/missing --run flex
LIBGMP_DLL = 1
LIBM =
LIBREADLINE = -lreadline
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LN_S = ln -s
M4 = m4
MAINT = #
MPFR_CFLAGS =
MPFR_LIBS =
OBJDUMP = objdump
OBJEXT = o
PACKAGE = gmp
RANLIB = ranlib
RC = @RC@
REPL_VSNPRINTF_OBJ = repl-vsnprintf$U.lo
REPL_VSNPRINTF_PRINTF_OBJ = printf/repl-vsnprintf$U.lo
SPEED_CYCLECOUNTER_OBJ = pentium.lo
STRIP = strip
TAL_OBJECT =
TUNE_SQR_OBJ = sqr_asm.o
U =
VERSION = 4.1.2
WITH_READLINE_01 = 1
YACC = yacc
am__include = #
am__quote =
gmp_srclinks = mpn/udiv.asm mpn/umul.asm mpn/add.c
mpn/add_1.c mpn/add_n.asm mpn/sub.c mpn/sub_1.c
mpn/sub_n.asm mpn/mul_1.asm mpn/addmul_1.asm
mpn/submul_1.asm mpn/lshift.asm mpn/rshift.asm
mpn/dive_1.asm mpn/diveby3.asm mpn/divis.c
mpn/divrem.c mpn/divrem_1.asm mpn/divrem_2.c
mpn/fib2_ui.c mpn/mod_1.asm mpn/mod_34lsub1.asm
mpn/mode1o.asm mpn/dump.c mpn/mul.c mpn/mul_fft.c
mpn/mul_n.c mpn/mul_basecase.asm mpn/sqr_basecase.asm
mpn/random.c mpn/random2.c mpn/pow_1.c mpn/rootrem.c
mpn/sqrtrem.c mpn/get_str.c mpn/set_str.c mpn/scan0.c
mpn/scan1.c mpn/popcount.asm mpn/hamdist.asm mpn/cmp.c
mpn/perfsqr.c mpn/bdivmod.c mpn/gcd_1.asm mpn/gcd.c
mpn/gcdext.c mpn/tdiv_qr.c mpn/dc_divrem_n.c
mpn/sb_divrem_mn.c mpn/jacbase.c mpn/copyi.asm
mpn/copyd.asm mpn/com_n.asm gmp-mparam.h
install_sh = /home/gmp/install-sh
mpn_objects = udiv.lo umul.lo add$U.lo add_1$U.lo
add_n.lo sub$U.lo sub_1$U.lo sub_n.lo mul_1.lo
addmul_1.lo submul_1.lo lshift.lo rshift.lo dive_1.lo
diveby3.lo divis$U.lo divrem$U.lo divrem_1.lo
divrem_2$U.lo fib2_ui$U.lo mod_1.lo mod_34lsub1.lo
mode1o.lo dump$U.lo mul$U.lo mul_fft$U.lo mul_n$U.lo
mul_basecase.lo sqr_basecase.lo random$U.lo
random2$U.lo pow_1$U.lo rootrem$U.lo sqrtrem$U.lo
get_str$U.lo set_str$U.lo scan0$U.lo scan1$U.lo
popcount.lo hamdist.lo cmp$U.lo perfsqr$U.lo
bdivmod$U.lo gcd_1.lo gcd$U.lo gcdext$U.lo
tdiv_qr$U.lo dc_divrem_n$U.lo sb_divrem_mn$U.lo
jacbase$U.lo copyi.lo copyd.lo com_n.lo
mpn_objs_in_libgmp = mpn/mp_bases.lo mpn/udiv.lo
mpn/umul.lo mpn/add$U.lo mpn/add_1$U.lo mpn/add_n.lo
mpn/sub$U.lo mpn/sub_1$U.lo mpn/sub_n.lo mpn/mul_1.lo
mpn/addmul_1.lo mpn/submul_1.lo mpn/lshift.lo
mpn/rshift.lo mpn/dive_1.lo mpn/diveby3.lo
mpn/divis$U.lo mpn/divrem$U.lo mpn/divrem_1.lo
mpn/divrem_2$U.lo mpn/fib2_ui$U.lo mpn/mod_1.lo
mpn/mod_34lsub1.lo mpn/mode1o.lo mpn/dump$U.lo
mpn/mul$U.lo mpn/mul_fft$U.lo mpn/mul_n$U.lo
mpn/mul_basecase.lo mpn/sqr_basecase.lo
mpn/random$U.lo mpn/random2$U.lo mpn/pow_1$U.lo
mpn/rootrem$U.lo mpn/sqrtrem$U.lo mpn/get_str$U.lo
mpn/set_str$U.lo mpn/scan0$U.lo mpn/scan1$U.lo
mpn/popcount.lo mpn/hamdist.lo mpn/cmp$U.lo
mpn/perfsqr$U.lo mpn/bdivmod$U.lo mpn/gcd_1.lo
mpn/gcd$U.lo mpn/gcdext$U.lo mpn/tdiv_qr$U.lo
mpn/dc_divrem_n$U.lo mpn/sb_divrem_mn$U.lo
mpn/jacbase$U.lo mpn/copyi.lo mpn/copyd.lo
mpn/com_n.lo
mpn_objs_in_libmp = mpn/mp_bases.lo mpn/udiv.lo
mpn/umul.lo mpn/add$U.lo mpn/add_1$U.lo mpn/add_n.lo
mpn/sub$U.lo mpn/sub_1$U.lo mpn/sub_n.lo mpn/mul_1.lo
mpn/addmul_1.lo mpn/submul_1.lo mpn/lshift.lo
mpn/rshift.lo mpn/dive_1.lo mpn/diveby3.lo
mpn/divis$U.lo mpn/divrem$U.lo mpn/divrem_1.lo
mpn/divrem_2$U.lo mpn/fib2_ui$U.lo mpn/mod_1.lo
mpn/mod_34lsub1.lo mpn/mode1o.lo mpn/dump$U.lo
mpn/mul$U.lo mpn/mul_fft$U.lo mpn/mul_n$U.lo
mpn/mul_basecase.lo mpn/sqr_basecase.lo mpn/pow_1$U.lo
mpn/rootrem$U.lo mpn/sqrtrem$U.lo mpn/get_str$U.lo
mpn/set_str$U.lo mpn/scan0$U.lo mpn/scan1$U.lo
mpn/popcount.lo mpn/hamdist.lo mpn/cmp$U.lo
mpn/perfsqr$U.lo mpn/bdivmod$U.lo mpn/gcd_1.lo
mpn/gcd$U.lo mpn/gcdext$U.lo mpn/tdiv_qr$U.lo
mpn/dc_divrem_n$U.lo mpn/sb_divrem_mn$U.lo
mpn/jacbase$U.lo mpn/copyi.lo mpn/copyd.lo
mpn/com_n.lo
LIBGMP_LT_CURRENT = 6
LIBGMP_LT_REVISION = 2
LIBGMP_LT_AGE = 3
LIBGMPXX_LT_CURRENT = 3
LIBGMPXX_LT_REVISION = 4
LIBGMPXX_LT_AGE = 0
LIBMP_LT_CURRENT = 4
LIBMP_LT_REVISION = 6
LIBMP_LT_AGE = 1
AUTOMAKE_OPTIONS = gnu no-dependencies ansi2knr
ACLOCAL_AMFLAGS = -I mpfr
# FIXME: This is a workaround for automake not
allowing info_TEXINFOS to be
# conditionalized. We want mpfr/mpfr.info only
installed under
# --enable-mpfr, but it and the rest of mpfr always
included in a "make
# dist".
#MPFR_DIR = mpfr
#MPFR_DIR = mpfr
# "tests" ahead of "mpfr" ensures tests/t-constants is
run before the
# mpfr/tests programs.
#
SUBDIRS = tests mpn mpz mpq mpf printf scanf cxx mpbsd
$(MPFR_DIR) demos tune
#GMPXX_HEADERS_OPTION = gmpxx.h
##MPFRXX_HEADERS_OPTION = mpfrxx.h
include_HEADERS = $(GMPXX_HEADERS_OPTION)
$(MPFRXX_HEADERS_OPTION)
nodist_include_HEADERS = gmp.h $(MPBSD_HEADERS_OPTION)
lib_LTLIBRARIES = libgmp.la
$(GMPXX_LTLIBRARIES_OPTION)
$(MPBSD_LTLIBRARIES_OPTION)
EXTRA_DIST = doc macos \
configfsf.guess configfsf.sub .gdbinit
INSTALL.autoconf libmp.sym \
gmpxx.h mpfrxx.h mpfr/README
DISTCLEANFILES = $(nodist_include_HEADERS) config.m4
configure.lineno mpn/udiv.asm mpn/umul.asm mpn/add.c
mpn/add_1.c mpn/add_n.asm mpn/sub.c mpn/sub_1.c
mpn/sub_n.asm mpn/mul_1.asm mpn/addmul_1.asm
mpn/submul_1.asm mpn/lshift.asm mpn/rshift.asm
mpn/dive_1.asm mpn/diveby3.asm mpn/divis.c
mpn/divrem.c mpn/divrem_1.asm mpn/divrem_2.c
mpn/fib2_ui.c mpn/mod_1.asm mpn/mod_34lsub1.asm
mpn/mode1o.asm mpn/dump.c mpn/mul.c mpn/mul_fft.c
mpn/mul_n.c mpn/mul_basecase.asm mpn/sqr_basecase.asm
mpn/random.c mpn/random2.c mpn/pow_1.c mpn/rootrem.c
mpn/sqrtrem.c mpn/get_str.c mpn/set_str.c mpn/scan0.c
mpn/scan1.c mpn/popcount.asm mpn/hamdist.asm mpn/cmp.c
mpn/perfsqr.c mpn/bdivmod.c mpn/gcd_1.asm mpn/gcd.c
mpn/gcdext.c mpn/tdiv_qr.c mpn/dc_divrem_n.c
mpn/sb_divrem_mn.c mpn/jacbase.c mpn/copyi.asm
mpn/copyd.asm mpn/com_n.asm gmp-mparam.h
# Generated by current texinfo.tex when processing
gmp.texi.
# FIXME: Maybe this should be added to automake.
MOSTLYCLEANFILES = gmp.tmp
# Tell gmp.h it's building gmp, not an application,
used by windows DLL stuff.
INCLUDES = -D__GMP_WITHIN_GMP
MPF_OBJECTS = mpf/init$U.lo mpf/init2$U.lo
mpf/set$U.lo mpf/set_ui$U.lo \
mpf/set_si$U.lo mpf/set_str$U.lo mpf/set_d$U.lo
mpf/set_z$U.lo \
mpf/iset$U.lo mpf/iset_ui$U.lo mpf/iset_si$U.lo
mpf/iset_str$U.lo \
mpf/iset_d$U.lo mpf/clear$U.lo mpf/get_str$U.lo
mpf/dump$U.lo \
mpf/size$U.lo mpf/eq$U.lo mpf/reldiff$U.lo
mpf/sqrt$U.lo mpf/random2$U.lo \
mpf/inp_str$U.lo mpf/out_str$U.lo mpf/add$U.lo
mpf/add_ui$U.lo \
mpf/sub$U.lo mpf/sub_ui$U.lo mpf/ui_sub$U.lo
mpf/mul$U.lo mpf/mul_ui$U.lo \
mpf/div$U.lo mpf/div_ui$U.lo \
mpf/cmp$U.lo mpf/cmp_d$U.lo mpf/cmp_ui$U.lo
mpf/cmp_si$U.lo \
mpf/mul_2exp$U.lo mpf/div_2exp$U.lo mpf/abs$U.lo
mpf/neg$U.lo \
mpf/set_q$U.lo mpf/get_d$U.lo mpf/get_d_2exp$U.lo
mpf/set_dfl_prec$U.lo \
mpf/set_prc$U.lo mpf/set_prc_raw$U.lo
mpf/get_dfl_prec$U.lo \
mpf/get_prc$U.lo mpf/ui_div$U.lo mpf/sqrt_ui$U.lo
\
mpf/ceilfloor$U.lo mpf/trunc$U.lo mpf/pow_ui$U.lo
\
mpf/urandomb$U.lo mpf/swap$U.lo \
mpf/fits_sint$U.lo mpf/fits_slong$U.lo
mpf/fits_sshort$U.lo \
mpf/fits_uint$U.lo mpf/fits_ulong$U.lo
mpf/fits_ushort$U.lo \
mpf/get_si$U.lo mpf/get_ui$U.lo \
mpf/int_p$U.lo
MPZ_OBJECTS = mpz/abs$U.lo mpz/add$U.lo
mpz/add_ui$U.lo \
mpz/aorsmul$U.lo mpz/aorsmul_i$U.lo mpz/and$U.lo
mpz/array_init$U.lo \
mpz/bin_ui$U.lo mpz/bin_uiui$U.lo \
mpz/cdiv_q$U.lo mpz/cdiv_q_ui$U.lo \
mpz/cdiv_qr$U.lo mpz/cdiv_qr_ui$U.lo \
mpz/cdiv_r$U.lo mpz/cdiv_r_ui$U.lo mpz/cdiv_ui$U.lo
\
mpz/cfdiv_q_2exp$U.lo mpz/cfdiv_r_2exp$U.lo \
mpz/clear$U.lo mpz/clrbit$U.lo \
mpz/cmp$U.lo mpz/cmp_d$U.lo mpz/cmp_si$U.lo
mpz/cmp_ui$U.lo \
mpz/cmpabs$U.lo mpz/cmpabs_d$U.lo mpz/cmpabs_ui$U.lo
\
mpz/com$U.lo \
mpz/cong$U.lo mpz/cong_2exp$U.lo mpz/cong_ui$U.lo
\
mpz/divexact$U.lo mpz/divegcd$U.lo mpz/dive_ui$U.lo
\
mpz/divis$U.lo mpz/divis_ui$U.lo mpz/divis_2exp$U.lo
mpz/dump$U.lo \
mpz/export$U.lo mpz/fac_ui$U.lo mpz/fdiv_q$U.lo \
mpz/fdiv_q_ui$U.lo mpz/fdiv_qr$U.lo
mpz/fdiv_qr_ui$U.lo \
mpz/fdiv_r$U.lo mpz/fdiv_r_ui$U.lo \
mpz/fdiv_ui$U.lo mpz/fib_ui$U.lo mpz/fib2_ui$U.lo
mpz/fits_sint$U.lo \
mpz/fits_slong$U.lo mpz/fits_sshort$U.lo
mpz/fits_uint$U.lo \
mpz/fits_ulong$U.lo mpz/fits_ushort$U.lo
mpz/gcd$U.lo \
mpz/gcd_ui$U.lo mpz/gcdext$U.lo mpz/get_d$U.lo
mpz/get_d_2exp$U.lo \
mpz/get_si$U.lo mpz/get_str$U.lo mpz/get_ui$U.lo
mpz/getlimbn$U.lo \
mpz/hamdist$U.lo \
mpz/import$U.lo mpz/init$U.lo mpz/init2$U.lo
mpz/inp_raw$U.lo \
mpz/inp_str$U.lo mpz/invert$U.lo \
mpz/ior$U.lo mpz/iset$U.lo mpz/iset_d$U.lo
mpz/iset_si$U.lo \
mpz/iset_str$U.lo mpz/iset_ui$U.lo mpz/jacobi$U.lo
mpz/kronsz$U.lo \
mpz/kronuz$U.lo mpz/kronzs$U.lo mpz/kronzu$U.lo \
mpz/lcm$U.lo mpz/lcm_ui$U.lo mpz/lucnum_ui$U.lo
mpz/lucnum2_ui$U.lo \
mpz/millerrabin$U.lo mpz/mod$U.lo mpz/mul$U.lo
mpz/mul_2exp$U.lo \
mpz/mul_si$U.lo mpz/mul_ui$U.lo \
mpz/n_pow_ui$U.lo mpz/neg$U.lo mpz/nextprime$U.lo
\
mpz/out_raw$U.lo mpz/out_str$U.lo mpz/perfpow$U.lo
mpz/perfsqr$U.lo \
mpz/popcount$U.lo mpz/pow_ui$U.lo mpz/powm$U.lo
mpz/powm_ui$U.lo \
mpz/pprime_p$U.lo mpz/random$U.lo mpz/random2$U.lo
\
mpz/realloc$U.lo mpz/realloc2$U.lo \
mpz/remove$U.lo mpz/root$U.lo mpz/rrandomb$U.lo
mpz/scan0$U.lo \
mpz/scan1$U.lo mpz/set$U.lo mpz/set_d$U.lo
mpz/set_f$U.lo \
mpz/set_q$U.lo mpz/set_si$U.lo mpz/set_str$U.lo
mpz/set_ui$U.lo \
mpz/setbit$U.lo \
mpz/size$U.lo mpz/sizeinbase$U.lo mpz/sqrt$U.lo \
mpz/sqrtrem$U.lo mpz/sub$U.lo mpz/sub_ui$U.lo
mpz/swap$U.lo \
mpz/tdiv_ui$U.lo mpz/tdiv_q$U.lo
mpz/tdiv_q_2exp$U.lo \
mpz/tdiv_q_ui$U.lo mpz/tdiv_qr$U.lo
mpz/tdiv_qr_ui$U.lo \
mpz/tdiv_r$U.lo mpz/tdiv_r_2exp$U.lo
mpz/tdiv_r_ui$U.lo \
mpz/tstbit$U.lo mpz/ui_pow_ui$U.lo mpz/ui_sub$U.lo
mpz/urandomb$U.lo \
mpz/urandomm$U.lo mpz/xor$U.lo
MPQ_OBJECTS = mpq/abs$U.lo mpq/aors$U.lo \
mpq/canonicalize$U.lo mpq/clear$U.lo \
mpq/cmp$U.lo mpq/cmp_si$U.lo mpq/cmp_ui$U.lo
mpq/div$U.lo \
mpq/get_d$U.lo mpq/get_den$U.lo mpq/get_num$U.lo
mpq/get_str$U.lo \
mpq/init$U.lo mpq/inp_str$U.lo mpq/inv$U.lo \
mpq/md_2exp$U.lo mpq/mul$U.lo mpq/neg$U.lo
mpq/out_str$U.lo \
mpq/set$U.lo mpq/set_den$U.lo mpq/set_num$U.lo \
mpq/set_si$U.lo mpq/set_str$U.lo mpq/set_ui$U.lo \
mpq/equal$U.lo mpq/set_z$U.lo mpq/set_d$U.lo \
mpq/set_f$U.lo mpq/swap$U.lo
MPN_OBJECTS = mpn/mp_bases.lo mpn/udiv.lo mpn/umul.lo
mpn/add$U.lo mpn/add_1$U.lo mpn/add_n.lo mpn/sub$U.lo
mpn/sub_1$U.lo mpn/sub_n.lo mpn/mul_1.lo
mpn/addmul_1.lo mpn/submul_1.lo mpn/lshift.lo
mpn/rshift.lo mpn/dive_1.lo mpn/diveby3.lo
mpn/divis$U.lo mpn/divrem$U.lo mpn/divrem_1.lo
mpn/divrem_2$U.lo mpn/fib2_ui$U.lo mpn/mod_1.lo
mpn/mod_34lsub1.lo mpn/mode1o.lo mpn/dump$U.lo
mpn/mul$U.lo mpn/mul_fft$U.lo mpn/mul_n$U.lo
mpn/mul_basecase.lo mpn/sqr_basecase.lo
mpn/random$U.lo mpn/random2$U.lo mpn/pow_1$U.lo
mpn/rootrem$U.lo mpn/sqrtrem$U.lo mpn/get_str$U.lo
mpn/set_str$U.lo mpn/scan0$U.lo mpn/scan1$U.lo
mpn/popcount.lo mpn/hamdist.lo mpn/cmp$U.lo
mpn/perfsqr$U.lo mpn/bdivmod$U.lo mpn/gcd_1.lo
mpn/gcd$U.lo mpn/gcdext$U.lo mpn/tdiv_qr$U.lo
mpn/dc_divrem_n$U.lo mpn/sb_divrem_mn$U.lo
mpn/jacbase$U.lo mpn/copyi.lo mpn/copyd.lo
mpn/com_n.lo
PRINTF_OBJECTS = \
printf/repl-vsnprintf$U.lo \
printf/asprintf$U.lo printf/asprntffuns$U.lo \
printf/doprnt$U.lo printf/doprntf$U.lo
printf/doprnti$U.lo \
printf/fprintf$U.lo \
printf/obprintf$U.lo printf/obvprintf$U.lo
printf/obprntffuns$U.lo \
printf/printf$U.lo printf/printffuns$U.lo \
printf/snprintf$U.lo printf/snprntffuns$U.lo \
printf/sprintf$U.lo printf/sprintffuns$U.lo \
printf/vasprintf$U.lo printf/vfprintf$U.lo
printf/vprintf$U.lo \
printf/vsnprintf$U.lo printf/vsprintf$U.lo
SCANF_OBJECTS = \
scanf/doscan$U.lo scanf/fscanf$U.lo
scanf/fscanffuns$U.lo \
scanf/scanf$U.lo scanf/sscanf$U.lo
scanf/sscanffuns$U.lo \
scanf/vfscanf$U.lo scanf/vscanf$U.lo
scanf/vsscanf$U.lo
CXX_OBJECTS = \
cxx/isfuns$U.lo cxx/ismpf$U.lo cxx/ismpq$U.lo
cxx/ismpz$U.lo \
cxx/osdoprnti$U.lo cxx/osfuns$U.lo \
cxx/osmpf$U.lo cxx/osmpq$U.lo cxx/osmpz$U.lo
MPBSD_OBJECTS = mpbsd/add$U.lo mpbsd/tdiv_qr$U.lo
mpbsd/set$U.lo \
mpbsd/powm$U.lo mpbsd/sub$U.lo mpbsd/cmp$U.lo
mpbsd/mfree$U.lo \
mpbsd/mtox$U.lo mpbsd/realloc$U.lo mpbsd/gcd$U.lo
mpbsd/itom$U.lo \
mpbsd/min$U.lo mpbsd/mul$U.lo mpbsd/mout$U.lo
mpbsd/rpow$U.lo \
mpbsd/sdiv$U.lo mpbsd/sqrtrem$U.lo mpbsd/xtom$U.lo
# In the current libtool it doesn't work to build
libgmp.la from convenience
# libraries like mpz/libmpz.la. Or rather it works,
but it ends up putting
# PIC objects into libgmp.a when shared and static are
both built.
#
# For now the big lists of objects above are used.
Something like mpz/*.lo
# would probably work, but might risk missing
something out or getting
# something extra. The source files for each .lo are
listed in the
# Makefile.am's in the subdirectories.
#
# Currently, unlike libmp below, we're not using
-export-symbols, since the
# tune and speed programs, and perhaps some of the
test programs, want to
# access undocumented symbols.
libgmp_la_SOURCES = gmp-impl.h longlong.h \
assert.c compat.c errno.c extract-dbl.c insert-dbl.c
memory.c \
mp_bpl.c mp_clz_tab.c mp_minv_tab.c mp_set_fns.c \
rand.c randclr.c randdef.c randlc.c randlc2s.c
randlc2x.c randraw.c \
rands.c randsd.c randsdui.c version.c
libgmp_la_DEPENDENCIES = \
$(MPF_OBJECTS) $(MPZ_OBJECTS) $(MPN_OBJECTS)
$(MPQ_OBJECTS) \
$(PRINTF_OBJECTS) $(SCANF_OBJECTS)
libgmp_la_LIBADD = $(libgmp_la_DEPENDENCIES)
libgmp_la_LDFLAGS = $(GMP_LDFLAGS) \
-version-info
$(LIBGMP_LT_CURRENT):$(LIBGMP_LT_REVISION):$(LIBGMP_LT_AGE)
# We need at least one .cc file in
$(libgmpxx_la_SOURCES) so automake will
# use $(CXXLINK) rather than the plain C $(LINK).
cxx/osfuns.cc is an
# arbitrary choice for that.
#GMPXX_LTLIBRARIES_OPTION = libgmpxx.la
libgmpxx_la_SOURCES = dummy.cc
libgmpxx_la_DEPENDENCIES = $(CXX_OBJECTS) libgmp.la
libgmpxx_la_LIBADD = $(libgmpxx_la_DEPENDENCIES)
libgmpxx_la_LDFLAGS = $(GMP_LDFLAGS) \
-version-info
$(LIBGMPXX_LT_CURRENT):$(LIBGMPXX_LT_REVISION):$(LIBGMPXX_LT_AGE)
# The selected mpz objects here support mpz/powm.c
(built as mpbsd/powm.lo)
# and can probably be removed when that switches to an
mpn implementation.
# (Apart from mpz/n_pow_ui$U.lo, which supports
mpbsd/rpow.c)
#MPBSD_HEADERS_OPTION = mp.h
#MPBSD_LTLIBRARIES_OPTION = libmp.la
libmp_la_SOURCES = assert.c errno.c memory.c mp_bpl.c
mp_clz_tab.c \
mp_minv_tab.c mp_set_fns.c
MPN_OBJS_IN_LIBMP = mpn/mp_bases.lo mpn/udiv.lo
mpn/umul.lo mpn/add$U.lo mpn/add_1$U.lo mpn/add_n.lo
mpn/sub$U.lo mpn/sub_1$U.lo mpn/sub_n.lo mpn/mul_1.lo
mpn/addmul_1.lo mpn/submul_1.lo mpn/lshift.lo
mpn/rshift.lo mpn/dive_1.lo mpn/diveby3.lo
mpn/divis$U.lo mpn/divrem$U.lo mpn/divrem_1.lo
mpn/divrem_2$U.lo mpn/fib2_ui$U.lo mpn/mod_1.lo
mpn/mod_34lsub1.lo mpn/mode1o.lo mpn/dump$U.lo
mpn/mul$U.lo mpn/mul_fft$U.lo mpn/mul_n$U.lo
mpn/mul_basecase.lo mpn/sqr_basecase.lo mpn/pow_1$U.lo
mpn/rootrem$U.lo mpn/sqrtrem$U.lo mpn/get_str$U.lo
mpn/set_str$U.lo mpn/scan0$U.lo mpn/scan1$U.lo
mpn/popcount.lo mpn/hamdist.lo mpn/cmp$U.lo
mpn/perfsqr$U.lo mpn/bdivmod$U.lo mpn/gcd_1.lo
mpn/gcd$U.lo mpn/gcdext$U.lo mpn/tdiv_qr$U.lo
mpn/dc_divrem_n$U.lo mpn/sb_divrem_mn$U.lo
mpn/jacbase$U.lo mpn/copyi.lo mpn/copyd.lo
mpn/com_n.lo
libmp_la_DEPENDENCIES = $(srcdir)/libmp.sym \
$(MPBSD_OBJECTS) $(MPN_OBJS_IN_LIBMP) \
mpz/add$U.lo mpz/gcdext$U.lo mpz/invert$U.lo
mpz/mul$U.lo \
mpz/n_pow_ui$U.lo mpz/realloc$U.lo mpz/set$U.lo
mpz/sub$U.lo \
mpz/tdiv_q$U.lo
libmp_la_LIBADD = $(libmp_la_DEPENDENCIES)
libmp_la_LDFLAGS = $(GMP_LDFLAGS) \
-version-info
$(LIBMP_LT_CURRENT):$(LIBMP_LT_REVISION):$(LIBMP_LT_AGE)
\
-export-symbols $(srcdir)/libmp.sym
# Optional objects, listed in a dummy library to
generate ansi2knr rules and
# get them in "make dist".
#
EXTRA_LTLIBRARIES = libdummy.la
libdummy_la_SOURCES = tal-debug.c tal-notreent.c
tal-reent.c
info_TEXINFOS = gmp.texi
gmp_TEXINFOS = fdl.texi
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = gmp.h mp.h
LTLIBRARIES = $(lib_LTLIBRARIES)
libdummy_la_LDFLAGS =
libdummy_la_LIBADD =
am_libdummy_la_OBJECTS = tal-debug$U.lo
tal-notreent$U.lo tal-reent$U.lo
libdummy_la_OBJECTS = $(am_libdummy_la_OBJECTS)
am_libgmp_la_OBJECTS = assert$U.lo compat$U.lo
errno$U.lo \
extract-dbl$U.lo insert-dbl$U.lo memory$U.lo
mp_bpl$U.lo \
mp_clz_tab$U.lo mp_minv_tab$U.lo mp_set_fns$U.lo
rand$U.lo \
randclr$U.lo randdef$U.lo randlc$U.lo randlc2s$U.lo \
randlc2x$U.lo randraw$U.lo rands$U.lo randsd$U.lo
randsdui$U.lo \
version$U.lo
libgmp_la_OBJECTS = $(am_libgmp_la_OBJECTS)
am_libgmpxx_la_OBJECTS = dummy.lo
libgmpxx_la_OBJECTS = $(am_libgmpxx_la_OBJECTS)
am_libmp_la_OBJECTS = assert$U.lo errno$U.lo
memory$U.lo mp_bpl$U.lo \
mp_clz_tab$U.lo mp_minv_tab$U.lo mp_set_fns$U.lo
libmp_la_OBJECTS = $(am_libmp_la_OBJECTS)
DEFS = -DHAVE_CONFIG_H
DEFAULT_INCLUDES = -I. -I$(srcdir) -I.
CPPFLAGS =
LDFLAGS =
LIBS =
depcomp =
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES)
$(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS)
$(DEFAULT_INCLUDES) \
$(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS)
$(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS)
$(CFLAGS) \
$(AM_LDFLAGS) $(LDFLAGS) -o $@
CFLAGS = -g -O2 -fomit-frame-pointer -mcpu=athlon
-march=athlon
CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES)
$(INCLUDES) \
$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX)
$(DEFS) \
$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS)
$(CPPFLAGS) \
$(AM_CXXFLAGS) $(CXXFLAGS)
CXXLD = $(CXX)
CXXLINK = $(LIBTOOL) --mode=link $(CXXLD)
$(AM_CXXFLAGS) $(CXXFLAGS) \
$(AM_LDFLAGS) $(LDFLAGS) -o $@
CXXFLAGS =
DIST_SOURCES = $(libdummy_la_SOURCES)
$(libgmp_la_SOURCES) \
$(libgmpxx_la_SOURCES) $(libmp_la_SOURCES)
INFO_DEPS = gmp.info
DVIS = gmp.dvi
TEXINFOS = gmp.texi
HEADERS = $(include_HEADERS) $(nodist_include_HEADERS)
RECURSIVE_TARGETS = info-recursive dvi-recursive
install-info-recursive \
uninstall-info-recursive all-recursive
install-data-recursive \
install-exec-recursive installdirs-recursive
install-recursive \
uninstall-recursive check-recursive
installcheck-recursive
DIST_COMMON = README $(gmp_TEXINFOS)
$(include_HEADERS) ./stamp-h1.in \
AUTHORS COPYING COPYING.LIB ChangeLog INSTALL
Makefile.am \
Makefile.in NEWS acconfig.h acinclude.m4 aclocal.m4
ansi2knr.1 \
ansi2knr.c config.guess config.in config.sub
configure \
configure.in gmp-h.in install-sh ltmain.sh mdate-sh
missing \
mkinstalldirs mp-h.in stamp-vti texinfo.tex
version.texi
DIST_SUBDIRS = tests mpn mpz mpq mpf printf scanf cxx
mpbsd mpfr demos \
tune
SOURCES = $(libdummy_la_SOURCES) $(libgmp_la_SOURCES)
$(libgmpxx_la_SOURCES) $(libmp_la_SOURCES)
all: config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
.SUFFIXES: .c .cc .dvi .info .lo .o .obj .ps .texi
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool
$(srcdir)/Makefile.in: # Makefile.am
$(top_srcdir)/configure.in $(ACLOCAL_M4)
cd $(top_srcdir) && \
$(AUTOMAKE) --gnu Makefile
Makefile: # $(srcdir)/Makefile.in
$(top_builddir)/config.status
cd $(top_builddir) && \
CONFIG_HEADERS= CONFIG_LINKS= \
CONFIG_FILES=$@ $(SHELL) ./config.status
$(top_builddir)/config.status: $(srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(srcdir)/configure: # $(srcdir)/configure.in
$(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
cd $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): # configure.in acinclude.m4
mpfr/acinclude.m4
cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
config.h: stamp-h1
@if test ! -f $@; then \
rm -f stamp-h1; \
$(MAKE) stamp-h1; \
else :; fi
stamp-h1: $(srcdir)/config.in
$(top_builddir)/config.status
@rm -f stamp-h1 stamp-h1T
@echo timestamp > stamp-h1T 2> /dev/null
cd $(top_builddir) \
&& CONFIG_FILES= CONFIG_HEADERS=config.h:config.in
\
$(SHELL) ./config.status
@mv stamp-h1T stamp-h1
$(srcdir)/config.in: # $(srcdir)/./stamp-h1.in
@if test ! -f $@; then \
rm -f $(srcdir)/./stamp-h1.in; \
$(MAKE) $(srcdir)/./stamp-h1.in; \
else :; fi
$(srcdir)/./stamp-h1.in: $(top_srcdir)/configure.in
$(ACLOCAL_M4) $(top_srcdir)/acconfig.h
@rm -f $(srcdir)/./stamp-h1.in
$(srcdir)/./stamp-h1.inT
@echo timestamp > $(srcdir)/./stamp-h1.inT 2>
/dev/null
cd $(top_srcdir) && $(AUTOHEADER)
@mv $(srcdir)/./stamp-h1.inT $(srcdir)/./stamp-h1.in
distclean-hdr:
-rm -f config.h
gmp.h: $(top_builddir)/config.status gmp-h.in
cd $(top_builddir) && CONFIG_FILES=$@:gmp-h.in
CONFIG_HEADERS= CONFIG_LINKS= $(SHELL) ./config.status
mp.h: $(top_builddir)/config.status mp-h.in
cd $(top_builddir) && CONFIG_FILES=$@:mp-h.in
CONFIG_HEADERS= CONFIG_LINKS= $(SHELL) ./config.status
install-libLTLIBRARIES: $(lib_LTLIBRARIES)
@$(NORMAL_INSTALL)
$(mkinstalldirs) $(DESTDIR)$(libdir)
@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
if test -f $$p; then \
echo " $(LIBTOOL) --mode=install $(INSTALL)
$(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$p"; \
$(LIBTOOL) --mode=install $(INSTALL)
$(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$p; \
else :; fi; \
done
uninstall-libLTLIBRARIES:
@$(NORMAL_UNINSTALL)
@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
echo " $(LIBTOOL) --mode=uninstall rm -f
$(DESTDIR)$(libdir)/$$p"; \
$(LIBTOOL) --mode=uninstall rm -f
$(DESTDIR)$(libdir)/$$p; \
done
clean-libLTLIBRARIES:
-test -z "$(lib_LTLIBRARIES)" || rm -f
$(lib_LTLIBRARIES)
libdummy.la: $(libdummy_la_OBJECTS)
$(libdummy_la_DEPENDENCIES)
$(LINK) $(libdummy_la_LDFLAGS)
$(libdummy_la_OBJECTS) $(libdummy_la_LIBADD) $(LIBS)
libgmp.la: $(libgmp_la_OBJECTS)
$(libgmp_la_DEPENDENCIES)
$(LINK) -rpath $(libdir) $(libgmp_la_LDFLAGS)
$(libgmp_la_OBJECTS) $(libgmp_la_LIBADD) $(LIBS)
libgmpxx.la: $(libgmpxx_la_OBJECTS)
$(libgmpxx_la_DEPENDENCIES)
$(CXXLINK) -rpath $(libdir) $(libgmpxx_la_LDFLAGS)
$(libgmpxx_la_OBJECTS) $(libgmpxx_la_LIBADD) $(LIBS)
libmp.la: $(libmp_la_OBJECTS) $(libmp_la_DEPENDENCIES)
$(LINK) -rpath $(libdir) $(libmp_la_LDFLAGS)
$(libmp_la_OBJECTS) $(libmp_la_LIBADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT) core *.core
distclean-compile:
-rm -f *.tab.c
ANSI2KNR =
ansi2knr: ansi2knr.$(OBJEXT)
$(LINK) ansi2knr.$(OBJEXT) $(LIBS)
ansi2knr.$(OBJEXT): $(CONFIG_HEADER)
clean-krextra:
-rm -f ansi2knr
mostlyclean-kr:
-test "$U" = "" || rm -f *_.c
.c.o:
$(COMPILE) -c `test -f $< || echo '$(srcdir)/'`$<
.c.obj:
$(COMPILE) -c `cygpath -w $<`
.c.lo:
$(LTCOMPILE) -c -o $@ `test -f $< || echo
'$(srcdir)/'`$<
assert_.c: assert.c $(ANSI2KNR)
$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES)
$(AM_CPPFLAGS) $(CPPFLAGS) `if test -f
$(srcdir)/assert.c; then echo $(srcdir)/assert.c; else
echo assert.c; fi` | sed 's/^# \([0-9]\)/#line \1/' |
$(ANSI2KNR) > assert_.c || rm -f assert_.c
compat_.c: compat.c $(ANSI2KNR)
$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES)
$(AM_CPPFLAGS) $(CPPFLAGS) `if test -f
$(srcdir)/compat.c; then echo $(srcdir)/compat.c; else
echo compat.c; fi` | sed 's/^# \([0-9]\)/#line \1/' |
$(ANSI2KNR) > compat_.c || rm -f compat_.c
errno_.c: errno.c $(ANSI2KNR)
$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES)
$(AM_CPPFLAGS) $(CPPFLAGS) `if test -f
$(srcdir)/errno.c; then echo $(srcdir)/errno.c; else
echo errno.c; fi` | sed 's/^# \([0-9]\)/#line \1/' |
$(ANSI2KNR) > errno_.c || rm -f errno_.c
extract-dbl_.c: extract-dbl.c $(ANSI2KNR)
$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES)
$(AM_CPPFLAGS) $(CPPFLAGS) `if test -f
$(srcdir)/extract-dbl.c; then echo
$(srcdir)/extract-dbl.c; else echo extract-dbl.c; fi`
| sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) >
extract-dbl_.c || rm -f extract-dbl_.c
insert-dbl_.c: insert-dbl.c $(ANSI2KNR)
$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES)
$(AM_CPPFLAGS) $(CPPFLAGS) `if test -f
$(srcdir)/insert-dbl.c; then echo
$(srcdir)/insert-dbl.c; else echo insert-dbl.c; fi` |
sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) >
insert-dbl_.c || rm -f insert-dbl_.c
memory_.c: memory.c $(ANSI2KNR)
$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES)
$(AM_CPPFLAGS) $(CPPFLAGS) `if test -f
$(srcdir)/memory.c; then echo $(srcdir)/memory.c; else
echo memory.c; fi` | sed 's/^# \([0-9]\)/#line \1/' |
$(ANSI2KNR) > memory_.c || rm -f memory_.c
mp_bpl_.c: mp_bpl.c $(ANSI2KNR)
$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES)
$(AM_CPPFLAGS) $(CPPFLAGS) `if test -f
$(srcdir)/mp_bpl.c; then echo $(srcdir)/mp_bpl.c; else
echo mp_bpl.c; fi` | sed 's/^# \([0-9]\)/#line \1/' |
$(ANSI2KNR) > mp_bpl_.c || rm -f mp_bpl_.c
mp_clz_tab_.c: mp_clz_tab.c $(ANSI2KNR)
$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES)
$(AM_CPPFLAGS) $(CPPFLAGS) `if test -f
$(srcdir)/mp_clz_tab.c; then echo
$(srcdir)/mp_clz_tab.c; else echo mp_clz_tab.c; fi` |
sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) >
mp_clz_tab_.c || rm -f mp_clz_tab_.c
mp_minv_tab_.c: mp_minv_tab.c $(ANSI2KNR)
$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES)
$(AM_CPPFLAGS) $(CPPFLAGS) `if test -f
$(srcdir)/mp_minv_tab.c; then echo
$(srcdir)/mp_minv_tab.c; else echo mp_minv_tab.c; fi`
| sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) >
mp_minv_tab_.c || rm -f mp_minv_tab_.c
mp_set_fns_.c: mp_set_fns.c $(ANSI2KNR)
$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES)
$(AM_CPPFLAGS) $(CPPFLAGS) `if test -f
$(srcdir)/mp_set_fns.c; then echo
$(srcdir)/mp_set_fns.c; else echo mp_set_fns.c; fi` |
sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) >
mp_set_fns_.c || rm -f mp_set_fns_.c
rand_.c: rand.c $(ANSI2KNR)
$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES)
$(AM_CPPFLAGS) $(CPPFLAGS) `if test -f
$(srcdir)/rand.c; then echo $(srcdir)/rand.c; else
echo rand.c; fi` | sed 's/^# \([0-9]\)/#line \1/' |
$(ANSI2KNR) > rand_.c || rm -f rand_.c
randclr_.c: randclr.c $(ANSI2KNR)
$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES)
$(AM_CPPFLAGS) $(CPPFLAGS) `if test -f
$(srcdir)/randclr.c; then echo $(srcdir)/randclr.c;
else echo randclr.c; fi` | sed 's/^# \([0-9]\)/#line
\1/' | $(ANSI2KNR) > randclr_.c || rm -f randclr_.c
randdef_.c: randdef.c $(ANSI2KNR)
$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES)
$(AM_CPPFLAGS) $(CPPFLAGS) `if test -f
$(srcdir)/randdef.c; then echo $(srcdir)/randdef.c;
else echo randdef.c; fi` | sed 's/^# \([0-9]\)/#line
\1/' | $(ANSI2KNR) > randdef_.c || rm -f randdef_.c
randlc_.c: randlc.c $(ANSI2KNR)
$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES)
$(AM_CPPFLAGS) $(CPPFLAGS) `if test -f
$(srcdir)/randlc.c; then echo $(srcdir)/randlc.c; else
echo randlc.c; fi` | sed 's/^# \([0-9]\)/#line \1/' |
$(ANSI2KNR) > randlc_.c || rm -f randlc_.c
randlc2s_.c: randlc2s.c $(ANSI2KNR)
$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES)
$(AM_CPPFLAGS) $(CPPFLAGS) `if test -f
$(srcdir)/randlc2s.c; then echo $(srcdir)/randlc2s.c;
else echo randlc2s.c; fi` | sed 's/^# \([0-9]\)/#line
\1/' | $(ANSI2KNR) > randlc2s_.c || rm -f randlc2s_.c
randlc2x_.c: randlc2x.c $(ANSI2KNR)
$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES)
$(AM_CPPFLAGS) $(CPPFLAGS) `if test -f
$(srcdir)/randlc2x.c; then echo $(srcdir)/randlc2x.c;
else echo randlc2x.c; fi` | sed 's/^# \([0-9]\)/#line
\1/' | $(ANSI2KNR) > randlc2x_.c || rm -f randlc2x_.c
randraw_.c: randraw.c $(ANSI2KNR)
$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES)
$(AM_CPPFLAGS) $(CPPFLAGS) `if test -f
$(srcdir)/randraw.c; then echo $(srcdir)/randraw.c;
else echo randraw.c; fi` | sed 's/^# \([0-9]\)/#line
\1/' | $(ANSI2KNR) > randraw_.c || rm -f randraw_.c
rands_.c: rands.c $(ANSI2KNR)
$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES)
$(AM_CPPFLAGS) $(CPPFLAGS) `if test -f
$(srcdir)/rands.c; then echo $(srcdir)/rands.c; else
echo rands.c; fi` | sed 's/^# \([0-9]\)/#line \1/' |
$(ANSI2KNR) > rands_.c || rm -f rands_.c
randsd_.c: randsd.c $(ANSI2KNR)
$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES)
$(AM_CPPFLAGS) $(CPPFLAGS) `if test -f
$(srcdir)/randsd.c; then echo $(srcdir)/randsd.c; else
echo randsd.c; fi` | sed 's/^# \([0-9]\)/#line \1/' |
$(ANSI2KNR) > randsd_.c || rm -f randsd_.c
randsdui_.c: randsdui.c $(ANSI2KNR)
$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES)
$(AM_CPPFLAGS) $(CPPFLAGS) `if test -f
$(srcdir)/randsdui.c; then echo $(srcdir)/randsdui.c;
else echo randsdui.c; fi` | sed 's/^# \([0-9]\)/#line
\1/' | $(ANSI2KNR) > randsdui_.c || rm -f randsdui_.c
tal-debug_.c: tal-debug.c $(ANSI2KNR)
$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES)
$(AM_CPPFLAGS) $(CPPFLAGS) `if test -f
$(srcdir)/tal-debug.c; then echo
$(srcdir)/tal-debug.c; else echo tal-debug.c; fi` |
sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) >
tal-debug_.c || rm -f tal-debug_.c
tal-notreent_.c: tal-notreent.c $(ANSI2KNR)
$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES)
$(AM_CPPFLAGS) $(CPPFLAGS) `if test -f
$(srcdir)/tal-notreent.c; then echo
$(srcdir)/tal-notreent.c; else echo tal-notreent.c;
fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) >
tal-notreent_.c || rm -f tal-notreent_.c
tal-reent_.c: tal-reent.c $(ANSI2KNR)
$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES)
$(AM_CPPFLAGS) $(CPPFLAGS) `if test -f
$(srcdir)/tal-reent.c; then echo
$(srcdir)/tal-reent.c; else echo tal-reent.c; fi` |
sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) >
tal-reent_.c || rm -f tal-reent_.c
version_.c: version.c $(ANSI2KNR)
$(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES)
$(AM_CPPFLAGS) $(CPPFLAGS) `if test -f
$(srcdir)/version.c; then echo $(srcdir)/version.c;
else echo version.c; fi` | sed 's/^# \([0-9]\)/#line
\1/' | $(ANSI2KNR) > version_.c || rm -f version_.c
assert_.$(OBJEXT) assert_.lo compat_.$(OBJEXT)
compat_.lo \
errno_.$(OBJEXT) errno_.lo extract-dbl_.$(OBJEXT)
extract-dbl_.lo \
insert-dbl_.$(OBJEXT) insert-dbl_.lo memory_.$(OBJEXT)
memory_.lo \
mp_bpl_.$(OBJEXT) mp_bpl_.lo mp_clz_tab_.$(OBJEXT)
mp_clz_tab_.lo \
mp_minv_tab_.$(OBJEXT) mp_minv_tab_.lo
mp_set_fns_.$(OBJEXT) \
mp_set_fns_.lo rand_.$(OBJEXT) rand_.lo
randclr_.$(OBJEXT) randclr_.lo \
randdef_.$(OBJEXT) randdef_.lo randlc_.$(OBJEXT)
randlc_.lo \
randlc2s_.$(OBJEXT) randlc2s_.lo randlc2x_.$(OBJEXT)
randlc2x_.lo \
randraw_.$(OBJEXT) randraw_.lo rands_.$(OBJEXT)
rands_.lo \
randsd_.$(OBJEXT) randsd_.lo randsdui_.$(OBJEXT)
randsdui_.lo \
tal-debug_.$(OBJEXT) tal-debug_.lo
tal-notreent_.$(OBJEXT) \
tal-notreent_.lo tal-reent_.$(OBJEXT) tal-reent_.lo
version_.$(OBJEXT) \
version_.lo : $(ANSI2KNR)
.cc.o:
$(CXXCOMPILE) -c -o $@ `test -f $< || echo
'$(srcdir)/'`$<
.cc.obj:
$(CXXCOMPILE) -c -o $@ `cygpath -w $<`
.cc.lo:
$(LTCXXCOMPILE) -c -o $@ `test -f $< || echo
'$(srcdir)/'`$<
$(srcdir)/version.texi: # $(srcdir)/stamp-vti
@:
$(srcdir)/stamp-vti: gmp.texi
$(top_srcdir)/configure.in
@(set `$(SHELL) $(srcdir)/mdate-sh
$(srcdir)/gmp.texi`; \
echo "@set UPDATED $$1 $$2 $$3"; \
echo "@set UPDATED-MONTH $$2 $$3"; \
echo "@set EDITION $(VERSION)"; \
echo "@set VERSION $(VERSION)") > vti.tmp
@cmp -s vti.tmp $(srcdir)/version.texi \
|| (echo "Updating $(srcdir)/version.texi"; \
cp vti.tmp $(srcdir)/version.texi)
address@hidden -f vti.tmp
@cp $(srcdir)/version.texi $@
mostlyclean-vti:
-rm -f vti.tmp
maintainer-clean-vti:
# -rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi
gmp.info: gmp.texi $(srcdir)/version.texi
$(gmp_TEXINFOS)
gmp.dvi: gmp.texi $(srcdir)/version.texi
$(gmp_TEXINFOS)
.texi.info:
@cd $(srcdir) && rm -f $@ address@hidden address@hidden
cd $(srcdir) \
&& $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS)
\
`echo $< | sed 's,.*/,,'`
.texi.dvi:
TEXINPUTS=$(srcdir):$$TEXINPUTS \
MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS)
$(MAKEINFOFLAGS) -I $(srcdir)' \
$(TEXI2DVI) $<
.texi:
@cd $(srcdir) && rm -f $@ address@hidden address@hidden
cd $(srcdir) \
&& $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS)
\
`echo $< | sed 's,.*/,,'`
MAKEINFO = ${SHELL} /home/gmp/missing --run makeinfo
TEXI2DVI = texi2dvi
DVIPS = dvips
.dvi.ps:
$(DVIPS) $< -o $@
uninstall-info-am:
$(PRE_UNINSTALL)
@if (install-info --version && \
install-info --version | fgrep -i -v debian)
>/dev/null 2>&1; then \
list='$(INFO_DEPS)'; \
for file in $$list; do \
echo " install-info
--info-dir=$(DESTDIR)$(infodir) --remove
$(DESTDIR)$(infodir)/$$file"; \
install-info --info-dir=$(DESTDIR)$(infodir)
--remove $(DESTDIR)$(infodir)/$$file; \
done; \
else :; fi
@$(NORMAL_UNINSTALL)
@list='$(INFO_DEPS)'; \
for file in $$list; do \
(if cd $(DESTDIR)$(infodir); then \
echo " rm -f $$file $$file-[0-9]
$$file-[0-9][0-9])"; \
rm -f $$file $$file-[0-9] $$file-[0-9][0-9]; \
else :; fi); \
done
dist-info: $(INFO_DEPS)
list='$(INFO_DEPS)'; \
for base in $$list; do \
d=$(srcdir); \
for file in `CDPATH=: && cd $$d && eval echo
$$base*`; do \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file; \
done; \
done
mostlyclean-aminfo:
-rm -f gmp.aux gmp.cp gmp.cps gmp.dvi gmp.fn gmp.fns
gmp.ky gmp.log gmp.pg \
gmp.ps gmp.toc gmp.tp gmp.vr gmp.vrs
maintainer-clean-aminfo:
cd $(srcdir) && \
for i in $(INFO_DEPS); do \
rm -f $$i; \
if test "`echo $$i-[0-9]*`" != "$$i-[0-9]*"; then \
rm -f $$i-[0-9]*; \
fi; \
done
install-includeHEADERS: $(include_HEADERS)
@$(NORMAL_INSTALL)
$(mkinstalldirs) $(DESTDIR)$(includedir)
@list='$(include_HEADERS)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi;
\
f="`echo $$p | sed -e 's|^.*/||'`"; \
echo " $(INSTALL_HEADER) $$d$$p
$(DESTDIR)$(includedir)/$$f"; \
$(INSTALL_HEADER) $$d$$p
$(DESTDIR)$(includedir)/$$f; \
done
uninstall-includeHEADERS:
@$(NORMAL_UNINSTALL)
@list='$(include_HEADERS)'; for p in $$list; do \
f="`echo $$p | sed -e 's|^.*/||'`"; \
echo " rm -f $(DESTDIR)$(includedir)/$$f"; \
rm -f $(DESTDIR)$(includedir)/$$f; \
done
install-nodist_includeHEADERS:
$(nodist_include_HEADERS)
@$(NORMAL_INSTALL)
$(mkinstalldirs) $(DESTDIR)$(includedir)
@list='$(nodist_include_HEADERS)'; for p in $$list;
do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi;
\
f="`echo $$p | sed -e 's|^.*/||'`"; \
echo " $(INSTALL_HEADER) $$d$$p
$(DESTDIR)$(includedir)/$$f"; \
$(INSTALL_HEADER) $$d$$p
$(DESTDIR)$(includedir)/$$f; \
done
uninstall-nodist_includeHEADERS:
@$(NORMAL_UNINSTALL)
@list='$(nodist_include_HEADERS)'; for p in $$list;
do \
f="`echo $$p | sed -e 's|^.*/||'`"; \
echo " rm -f $(DESTDIR)$(includedir)/$$f"; \
rm -f $(DESTDIR)$(includedir)/$$f; \
done
# This directory's subdirectories are mostly
independent; you can cd
# into them and run `make' without going through this
Makefile.
# To change the values of `make' variables: instead of
editing Makefiles,
# (1) if the variable is set in `config.status', edit
`config.status'
# (which will cause the Makefiles to be
regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make'
command line.
$(RECURSIVE_TARGETS):
@set fnord $(MAKEFLAGS); amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
$$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;;
*) exit 1;; esac; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
mostlyclean-recursive clean-recursive
distclean-recursive \
maintainer-clean-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
dot_seen=no; \
case "$@" in \
distclean-* | maintainer-clean-*)
list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
rev=''; for subdir in $$list; do \
if test "$$subdir" = "."; then :; else \
rev="$$subdir $$rev"; \
fi; \
done; \
rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
$$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;;
*) exit 1;; esac; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE)
$(AM_MAKEFLAGS) tags); \
done
tags: TAGS
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo
$(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
mkid -fID $$unique $(LISP)
TAGS: tags-recursive $(HEADERS) $(SOURCES) config.in
$(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -f $$subdir/TAGS && tags="$$tags -i
$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo
$(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(ETAGS_ARGS)config.in$$unique$(LISP)$$tags"
\
|| etags $(ETAGS_ARGS) $$tags config.in $$unique
$(LISP)
GTAGS:
here=`CDPATH=: && cd $(top_builddir) && pwd` \
&& cd $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) $$here
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS)
$(EXTRA_DIST)
top_distdir = .
# Avoid unsightly `./'.
distdir = $(PACKAGE)-$(VERSION)
GZIP_ENV = --best
distdir: $(DISTFILES)
-chmod -R a+w $(distdir) >/dev/null 2>&1; rm -rf
$(distdir)
mkdir $(distdir)
$(mkinstalldirs) $(distdir)/. $(distdir)/demos
$(distdir)/demos/calc $(distdir)/demos/expr
$(distdir)/mpfr
@for file in $(DISTFILES); do \
if test -f $$file; then d=.; else d=$(srcdir); fi;
\
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != ".";
then \
$(mkinstalldirs) "$(distdir)/$$dir"; \
fi; \
if test -d $$d/$$file; then \
cp -pR $$d/$$file $(distdir) \
|| exit 1; \
else \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
for subdir in $(DIST_SUBDIRS); do \
if test "$$subdir" = .; then :; else \
test -d $(distdir)/$$subdir \
|| mkdir $(distdir)/$$subdir \
|| exit 1; \
(cd $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$(top_distdir)" \
distdir=../$(distdir)/$$subdir \
distdir) \
|| exit 1; \
fi; \
done
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="${top_distdir}" distdir="$(distdir)" \
dist-info dist-hook
-find $(distdir) -type d ! -perm -777 -exec chmod
a+rwx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {}
\; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(SHELL) $(install_sh)
-c -m a+r {} {} \; \
|| chmod -R a+r $(distdir)
dist: distdir
$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c
>$(distdir).tar.gz
-chmod -R a+w $(distdir) >/dev/null 2>&1; rm -rf
$(distdir)
# This target untars the dist file and tries a VPATH
configuration. Then
# it guarantees that the distribution is
self-contained by making another
# tarfile.
distcheck: dist
-chmod -R a+w $(distdir) > /dev/null 2>&1; rm -rf
$(distdir)
GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz |
$(AMTAR) xf -
chmod -R a-w $(distdir); chmod a+w $(distdir)
mkdir $(distdir)/=build
mkdir $(distdir)/=inst
chmod a-w $(distdir)
dc_install_base=`CDPATH=: && cd $(distdir)/=inst &&
pwd` \
&& cd $(distdir)/=build \
&& ../configure --srcdir=..
--prefix=$$dc_install_base \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
&& (test `find $$dc_install_base -type f -print |
wc -l` -le 1 \
|| (echo "Error: files left after uninstall"
1>&2; \
exit 1) ) \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& $(MAKE) $(AM_MAKEFLAGS) distclean \
&& rm -f $(distdir).tar.gz \
&& (test `find . -type f -print | wc -l` -eq 0 \
|| (echo "Error: files left after distclean"
1>&2; \
exit 1) )
-chmod -R a+w $(distdir) > /dev/null 2>&1; rm -rf
$(distdir)
@echo "$(distdir).tar.gz is ready for distribution" |
\
sed 'h;s/./=/g;p;x;p;x'
check-am: all-am
check: check-recursive
all-am: Makefile $(INFO_DEPS) $(ANSI2KNR)
$(LTLIBRARIES) $(HEADERS) \
config.h
installdirs: installdirs-recursive
installdirs-am:
$(mkinstalldirs) $(DESTDIR)$(libdir)
$(DESTDIR)$(infodir) $(DESTDIR)$(includedir)
$(DESTDIR)$(includedir)
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am
install-data-am
installcheck: installcheck-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS)
INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"`
install
mostlyclean-generic:
-test -z "$(MOSTLYCLEANFILES)" || rm -f
$(MOSTLYCLEANFILES)
clean-generic:
distclean-generic:
-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h
stamp-h[0-9]*
-test -z "$(DISTCLEANFILES)" || rm -f
$(DISTCLEANFILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to
use"
@echo "it deletes files that may require special
tools to rebuild."
clean: clean-recursive
clean-am: clean-generic clean-krextra
clean-libLTLIBRARIES clean-libtool \
mostlyclean-am
dist-all: distdir
$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c
>$(distdir).tar.gz
-chmod -R a+w $(distdir) >/dev/null 2>&1; rm -rf
$(distdir)
distclean: distclean-recursive
-rm -f config.status config.cache config.log
distclean-am: clean-am distclean-compile
distclean-generic distclean-hdr \
distclean-libtool distclean-tags
dvi: dvi-recursive
dvi-am: $(DVIS)
info: info-recursive
info-am: $(INFO_DEPS)
install-data-am: install-includeHEADERS
install-info-am \
install-nodist_includeHEADERS
install-exec-am: install-libLTLIBRARIES
install-info: install-info-recursive
install-info-am: $(INFO_DEPS)
@$(NORMAL_INSTALL)
$(mkinstalldirs) $(DESTDIR)$(infodir)
@list='$(INFO_DEPS)'; \
for file in $$list; do \
d=$(srcdir); \
for ifile in `CDPATH=: && cd $$d && echo $$file
$$file-[0-9] $$file-[0-9][0-9]`; do \
if test -f $$d/$$ifile; then \
echo " $(INSTALL_DATA) $$d/$$ifile
$(DESTDIR)$(infodir)/$$ifile"; \
$(INSTALL_DATA) $$d/$$ifile
$(DESTDIR)$(infodir)/$$ifile; \
else : ; fi; \
done; \
done
@$(POST_INSTALL)
@if (install-info --version && \
install-info --version | fgrep -i -v debian)
>/dev/null 2>&1; then \
list='$(INFO_DEPS)'; \
for file in $$list; do \
echo " install-info
--info-dir=$(DESTDIR)$(infodir)
$(DESTDIR)$(infodir)/$$file";\
install-info --info-dir=$(DESTDIR)$(infodir)
$(DESTDIR)$(infodir)/$$file || :;\
done; \
else : ; fi
install-man:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
maintainer-clean-am: distclean-am
maintainer-clean-aminfo \
maintainer-clean-generic maintainer-clean-vti
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-aminfo mostlyclean-compile
\
mostlyclean-generic mostlyclean-kr
mostlyclean-libtool \
mostlyclean-vti
uninstall-am: uninstall-includeHEADERS
uninstall-info-am \
uninstall-libLTLIBRARIES
uninstall-nodist_includeHEADERS
uninstall-info: uninstall-info-recursive
.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check
check-am clean \
clean-generic clean-krextra clean-libLTLIBRARIES
clean-libtool \
clean-recursive dist dist-all dist-info distcheck
distclean \
distclean-compile distclean-generic distclean-hdr \
distclean-libtool distclean-recursive distclean-tags
distdir \
dvi dvi-am dvi-recursive info info-am info-recursive
install \
install-am install-data install-data-am
install-data-recursive \
install-exec install-exec-am install-exec-recursive \
install-includeHEADERS install-info install-info-am \
install-info-recursive install-libLTLIBRARIES
install-man \
install-nodist_includeHEADERS install-recursive
install-strip \
installcheck installcheck-am installdirs
installdirs-am \
installdirs-recursive maintainer-clean
maintainer-clean-aminfo \
maintainer-clean-generic maintainer-clean-recursive \
maintainer-clean-vti mostlyclean mostlyclean-aminfo \
mostlyclean-compile mostlyclean-generic
mostlyclean-kr \
mostlyclean-libtool mostlyclean-recursive
mostlyclean-vti tags \
tags-recursive uninstall uninstall-am
uninstall-includeHEADERS \
uninstall-info-am uninstall-info-recursive \
uninstall-libLTLIBRARIES
uninstall-nodist_includeHEADERS \
uninstall-recursive
# Avoid: CVS - cvs directories
# *~ - emacs backups
# .#* - cvs merge originals
#
# *~ and .#* only occur when a whole directory without
it's own Makefile.am
# is distributed, like "doc" or the mpn cpu
subdirectories.
#
dist-hook:
-find $(distdir) \( -name CVS -type d \) -o -name
"*~" -o -name ".#*" \
| xargs rm -rf
# Tell versions [3.59,3.63) of GNU make to not export
all variables.
# Otherwise a system limit (for SysV at least) may be
exceeded.
.NOEXPORT:
__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
- Make file error. Please Help..,
Ron de <=