[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Bug-gnubg] autoconf/autoheader/aclocal fails now (LONG)
From: |
Marco van Tol |
Subject: |
Re: [Bug-gnubg] autoconf/autoheader/aclocal fails now (LONG) |
Date: |
Mon, 26 Sep 2005 14:43:48 +0000 |
User-agent: |
Mutt/1.5.6i |
On Mon, Sep 26, 2005 at 12:24:59PM +0200, Jim Segrave wrote:
> On Sat 24 Sep 2005 (19:47 +0200), Christian Anthon wrote:
> > On Sat, Sep 24, 2005 at 03:07:32PM +0200, Jim Segrave wrote:
> > > On Sat 24 Sep 2005 (12:39 +0100), Jon Kinsey wrote:
> > > > Jon Kinsey wrote:
> > > > >
> > > > > Ok, who is a config expert? I could "have a go", but I'd mostly be
> > > > > guessing...
> > > >
> > > > Ok, I've "had a go"... It may all work ok now (I'll try it on my linux
> > > > box in a minute). Anyone else who can try building would help.
> > > >
> > > > Note that I've tidied things up a bit (remove myftgl.h and myftgl.c and
> > > > limited the use of freetype to the font building).
> > >
> > > With autoconf 2.59, autoheader 2.59 and aclocal 1.9, here's what
> > > happens
> > >
> > > address@hidden jes/gnubg$ autoconf
> > > address@hidden jes/gnubg$ autoheader
> > > address@hidden jes/gnubg$ aclocal -I m4
> > > acinclude.m4:17: warning: underquoted definition of AC_DEFINE_DIR
> >
> > This warning is probably without consequence.
> >
> > > configure.in:582: warning: jm_GLIBC21 is m4_require'd but is not
> > > m4_defun'd
> >
> > while this kind is not.
> >
> > Either you are missing a particular library or it is caused by the gnubg
> > .m4 files being much older than current libraries. You could try and
> > find the relevant .m4 file in your own or in an older distribution and
> > place them in the m4 subdir. Otherwise you have to figure out what the
> > updated version of the auto-tools files would be.
> >
> > good luck, Christian.
>
> FreeBSD doesn't do anything when upgrading the port of aclocal to
> create the link to the previous macro libraries. Updating this allows
> autoreconf to completely regenerate the .in files and build gnubg from
> the CVS source (with a slew of underquoting warnings and one warning
> re:
>
> autoreconf259: configure.in: AM_GNU_GETTEXT is used, but not
> AM_GNU_GETTEXT_VERSION
Jim, install these, set your path to /usr/local/gnu-autotools/bin and see if
that helps: (They will at least get you 'autoconf' as opposed to
'autoconf<version>')
/usr/ports/devel/gnu-autoconf
/usr/ports/devel/gnu-libtool
/usr/ports/devel/gnu-automake
If this works, you can set a 'depends' flag (or something) in the port to
set it to depend on a certain version or higher I believe.
HTH, :)
Marco
--
Als de redding het hoogst is, is de nood nabij!
- [Bug-gnubg] FTGL Removed!, Jon Kinsey, 2005/09/20
- Message not available
- Message not available
- Re: [Bug-gnubg] FTGL Removed!, Øystein Johansen, 2005/09/24
- Re: [Bug-gnubg] FTGL Removed!, Jon Kinsey, 2005/09/24
- Re: [Bug-gnubg] FTGL Removed!, Jon Kinsey, 2005/09/24
- Message not available
- Re: [Bug-gnubg] autoconf/autoheader/aclocal fails now (LONG), Jim Segrave, 2005/09/24
- Re: [Bug-gnubg] autoconf/autoheader/aclocal fails now (LONG), Christian Anthon, 2005/09/24
- Re: [Bug-gnubg] autoconf/autoheader/aclocal fails now (LONG), Jim Segrave, 2005/09/26
- Re: [Bug-gnubg] autoconf/autoheader/aclocal fails now (LONG),
Marco van Tol <=