[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
wireless setup / tools for intel wireless
From: |
Riccardo Mottola |
Subject: |
wireless setup / tools for intel wireless |
Date: |
Tue, 9 Feb 2021 12:43:03 +0100 |
User-agent: |
Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:60.0) Gecko/20100101 SeaMonkey/2.53.6 |
Hi,
I got another laptop just to run HURD (more on its status in a separate
mail).
I'd like to try to setup wireless, if possible. I found as reference
only some very old posts.
I have installed wireless-tools-gnumach, but shouldn't I have "iwconfig"
with it? can't find it.
# inetutils-ifconfig
/dev/eth0 (2):
inet address 192.168.1.146
netmask 255.255.255.0
broadcast 192.168.1.255
flags UP BROADCAST RUNNING ALLMULTI MULTICAST
mtu 1500
link encap Ethernet
hardware addr 00:0A:E4:C5:75:D5
lo (1):
inet address 127.0.0.1
netmask 255.0.0.0
flags UP LOOPBACK RUNNING
mtu 3924
link encap Local Loopback
Shos only the wired ethernet and loopback, is that expected?
lspci shows I have this controller:
0b:02.0 Network controller: Intel Corporation PRO/Wireless 2915ABG
[Calexico2] Network Connection (rev 05)
Riccardo
- wireless setup / tools for intel wireless,
Riccardo Mottola <=