[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Problems trying to install Debian GNU/Hurd 2021 in SATA AHCI mode, o
From: |
Almudena Garcia |
Subject: |
Re: Problems trying to install Debian GNU/Hurd 2021 in SATA AHCI mode, over Thinkpad T410 |
Date: |
Tue, 17 Aug 2021 16:01:46 +0200 |
> You need to select "AHCI" in bios - not "Compatibility"!
I did it
> "lspci -nn" on my w520 with coreboot shows:
I sent some lspci photos in other mails
> Can you boot with "AHCI" mode enabled and send the output of "lspci -nn"
Check attached image
El martes 17 de agosto de 2021, Damien Zammit escribió:
> Hi Almu,
>
> You need to select "AHCI" in bios - not "Compatibility"!
>
> "lspci -nn" on my w520 with coreboot shows:
>
> 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series
> Chipset Family 6 port Mobile SATA AHCI Controller [8086:1c03] (rev 05)
>
> I think the compatibility mode makes it appear like an IDE interface, but we
> want AHCI.
>
> Can you boot with "AHCI" mode enabled and send the output of "lspci -nn"
>
> Damien
>
>
> On 17/8/21 5:11 am, Almudena Garcia wrote:
> >> Is it really in AHCI mode?
> > Check first and second image
> >
> >> we need to know what
> >> is actually showing up exactly in lspci, to be sure that the card is
> >> showing up really in AHCI-compatible mode.
> >
> > Next images
> >
> > El lun, 16 ago 2021 a las 20:47, Almudena Garcia
> > (<liberamenso10000@gmail.com <mailto:liberamenso10000@gmail.com>>) escribió:
> >
> > > Is it really in AHCI mode?
> >
> > Yes, I enabled AHCI SATA mode in the BIOS
> >
> > > This is talking about wd0, i.e. the rumpdisk device, i.e. gnumach
> > > didn't detect the AHCI card. That's not expected, we need to know what
> > > is actually showing up exactly in lspci, to be sure that the card is
> > > showing up really in AHCI-compatible mode.
> >
> > I will try to execute it in rescue mode (the current Debian GNU/Hurd
> > 2021 installation in compatibility mode has generate some errors and I
> > can't access to tty. Next report)
> >
> > > Alternatively you could try to reboot to have the partition re-read.
> > But
> > > still it's not expected that partition re-read doesn't work, it is
> > > implemented and works in my tests. As usual, actual error messages are
> > > what you want to show, i.e. console 4 (or posssibly more conveniently,
> > > /var/log/syslog)
> >
> > I tried it many times. If I do a installation in IDE mode and, after
> > this, I try a new installation in AHCI mode, the installer detects the
> > partitions correctly. But then fails in the "base system packages" step.
> >
> > > "no more room" looks like somehow rumpdisk is trying to handle more
> > data
> > > than it can. What is the actual size of your disk? I don't know what
> > > sizes where actually tested at all.
> >
> > My harddisk has ~ 320 GB
> >
> > Thanks for your response, I will try to get more information
> >
> >
> > El lun, 16 ago 2021 a las 20:34, Samuel Thibault
> > (<samuel.thibault@gnu.org <mailto:samuel.thibault@gnu.org>>) escribió:
> >
> > Hello,
> >
> > Almudena Garcia, le dim. 15 août 2021 02:04:38 +0200, a ecrit:
> > > Tonight I'm trying to install Debian GNU/Hurd 2021 in a Thinkpad
> > T410,
> > > configuring SATA disk in AHCI mode,
> >
> > Is it really in AHCI mode?
> >
> > > The installer loads, but in partitioning step, after format the
> > partitions, I
> > > found this advice (first attached image)
> >
> > This is talking about wd0, i.e. the rumpdisk device, i.e. gnumach
> > didn't detect the AHCI card. That's not expected, we need to know
> > what
> > is actually showing up exactly in lspci, to be sure that the card is
> > showing up really in AHCI-compatible mode.
> >
> > > If I try to continue,
> >
> > Alternatively you could try to reboot to have the partition
> > re-read. But
> > still it's not expected that partition re-read doesn't work, it is
> > implemented and works in my tests. As usual, actual error messages
> > are
> > what you want to show, i.e. console 4 (or posssibly more
> > conveniently,
> > /var/log/syslog)
> >
> > > the installer format the partitions and then appears
> > > these errors (rest of images)
> >
> > "no more room" looks like somehow rumpdisk is trying to handle more
> > data
> > than it can. What is the actual size of your disk? I don't know what
> > sizes where actually tested at all.
> >
> > Samuel
> >
>
--
Enviado desde mi dispositivo Sailfish
photo_2021-08-17_16-01-31.jpg
Description: JPEG image
- Re: Problems trying to install Debian GNU/Hurd 2021 in SATA AHCI mode, over Thinkpad T410, (continued)
- Re: Problems trying to install Debian GNU/Hurd 2021 in SATA AHCI mode, over Thinkpad T410, Almudena Garcia, 2021/08/16
- Re: Problems trying to install Debian GNU/Hurd 2021 in SATA AHCI mode, over Thinkpad T410, Almudena Garcia, 2021/08/16
- Re: Problems trying to install Debian GNU/Hurd 2021 in SATA AHCI mode, over Thinkpad T410, Samuel Thibault, 2021/08/16
- Re: Problems trying to install Debian GNU/Hurd 2021 in SATA AHCI mode, over Thinkpad T410, Almudena Garcia, 2021/08/16
- Re: Problems trying to install Debian GNU/Hurd 2021 in SATA AHCI mode, over Thinkpad T410, Samuel Thibault, 2021/08/16
- Re: Problems trying to install Debian GNU/Hurd 2021 in SATA AHCI mode, over Thinkpad T410, Almudena Garcia, 2021/08/16
- Re: Problems trying to install Debian GNU/Hurd 2021 in SATA AHCI mode, over Thinkpad T410, Samuel Thibault, 2021/08/16
- Re: Problems trying to install Debian GNU/Hurd 2021 in SATA AHCI mode, over Thinkpad T410, Almudena Garcia, 2021/08/16
- Re: Problems trying to install Debian GNU/Hurd 2021 in SATA AHCI mode, over Thinkpad T410, Samuel Thibault, 2021/08/16
- Re: Problems trying to install Debian GNU/Hurd 2021 in SATA AHCI mode, over Thinkpad T410, Damien Zammit, 2021/08/16
- Re: Problems trying to install Debian GNU/Hurd 2021 in SATA AHCI mode, over Thinkpad T410,
Almudena Garcia <=
- Re: Problems trying to install Debian GNU/Hurd 2021 in SATA AHCI mode, over Thinkpad T410, Almudena Garcia, 2021/08/17
- Re: Problems trying to install Debian GNU/Hurd 2021 in SATA AHCI mode, over Thinkpad T410, Samuel Thibault, 2021/08/17
- Re: Problems trying to install Debian GNU/Hurd 2021 in SATA AHCI mode, over Thinkpad T410, Almudena Garcia, 2021/08/17
- Re: Problems trying to install Debian GNU/Hurd 2021 in SATA AHCI mode, over Thinkpad T410, Almudena Garcia, 2021/08/17
- Re: Problems trying to install Debian GNU/Hurd 2021 in SATA AHCI mode, over Thinkpad T410, Samuel Thibault, 2021/08/17
- Re: Problems trying to install Debian GNU/Hurd 2021 in SATA AHCI mode, over Thinkpad T410, Almudena Garcia, 2021/08/17
- Re: Problems trying to install Debian GNU/Hurd 2021 in SATA AHCI mode, over Thinkpad T410, Samuel Thibault, 2021/08/17
- Re: Problems trying to install Debian GNU/Hurd 2021 in SATA AHCI mode, over Thinkpad T410, Almudena Garcia, 2021/08/17
- Re: Problems trying to install Debian GNU/Hurd 2021 in SATA AHCI mode, over Thinkpad T410, Almudena Garcia, 2021/08/17
- Re: Problems trying to install Debian GNU/Hurd 2021 in SATA AHCI mode, over Thinkpad T410, Samuel Thibault, 2021/08/17