|
| From: | Diederik de Haas |
| Subject: | bug#50168: Inconsistent behavior creating partitions with 'Xmib' and 'X%' (off-by-1 error?) |
| Date: | Sun, 22 Aug 2021 19:59:06 +0200 |
[I'm not sure this is the appropriate place/way and if not, apologies, and can
you point me to the right place/way]
Hi,
This is a forward of https://bugs.debian.org/988146 where I reported that
partitions were created differently when using 'mib' unit vs '%' unit.
To demonstrate it, I created 3 scripts which creates a 100MB image and do the
partitioning within that.
When reporting the Debian bug, I only had the mixed test and 'parted-bug-test-
mixed.sh' is identical to the one attached here, apart from an 'else' clause
which explicitly deletes a prior created image.
In parted-bug-test-mixed.sh, I mixed 'mib' and '%' and due to the 100MB, that
should've worked, but it did not.
When using only 'mib' then the script fails too.
When using only '%' then the script succeeds.
I think parted does the right thing when using '%'.
Relevant portion of output when running the mixed script:
=======================================================
Creating partition table ... Done
Creating 1st partition ('4mib' '20%') ... Done
Creating 2nd partition ('20%' '40%' ... Done
Creating 3rd partition ('40mib' '60mib') ... Done
Showing partition layout
Disk temp/parted-test.img: 100 MiB, 104857600 bytes, 204800 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x03f77810
Device Boot Start End Sectors Size Id Type
temp/parted-test.img1 8192 40959 32768 16M c W95 FAT32 (LBA)
temp/parted-test.img2 40960 81919 40960 20M 83 Linux
temp/parted-test.img3 81920 122880 40961 20M 83 Linux
Creating 4th partition ('60mib' '100%' ... Error: You requested a partition
from 62,9MB to 105MB (sectors 122880..204799).
The closest location we can manage is 62,9MB to 105MB (sectors
122881..204799).
=======================================================
Cheers,
Diederik
parted-bug-test-mb.sh
Description: application/shellscript
parted-bug-test-perc.sh
Description: application/shellscript
parted-bug-test-mixed.sh
Description: application/shellscript
signature.asc
Description: This is a digitally signed message part.
| [Prev in Thread] | Current Thread | [Next in Thread] |