[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Zebra Bug
|
From: |
Anthony Schirripa |
|
Subject: |
Zebra Bug |
|
Date: |
Mon, 01 Jul 2002 17:10:09 -0400 |
|
User-agent: |
Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.0rc2) Gecko/20020513 Debian/1.0rc2-1 |
To Whom It May Concern:
I am trying to install the Zebra software on a RedHat7.3 machine, but I am
getting some rather cryptic error messages upon entering the "make install"
command. They are involved with a '.texi' file and makeinfo. Here is what it
looks like:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
cd . && makeinfo `echo install.texi | sed 's,.*/,,'`
./install.texi:1: Next reference to nonexistent node `Basic commands'.
./install.texi:1: Prev reference to nonexistent node `Overview'.
./install.texi:1: Up reference to nonexistent node `Top'.
./install.texi:218: Cross reference to nonexistent node `Config Commands'.
./install.texi:159: Cross reference to nonexistent node `Bug Reports'.
./install.texi:168: Cross reference to nonexistent node `Kernel Interface'.
./install.texi:162: Cross reference to nonexistent node `Kernel Interface'.
makeinfo: Removing output file `install.info' due to errors; use --force to
preserve.
*** Error code 2
Stop.
*** Error code 1
Stop.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
I have the most recent version of makeinfo (4.1), and after commenting out the makeinfo
section of the make file I was able to install without a problem, however no docs were
generated. Just thought I'd let you know. Thanks.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
[xxxxxxx zebra-0.92a]$ netstat -rn
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
192.245.33.5 127.0.0.1 255.255.255.255 UGH 40 0 0 lo
255.255.255.255 0.0.0.0 255.255.255.255 UH 40 0 0 eth0
192.245.33.0 192.245.33.5 255.255.255.0 UG 40 0 0 eth0
192.245.33.0 0.0.0.0 255.255.255.0 U 40 0 0 eth0
10.0.0.0 192.245.33.25 255.0.0.0 UG 40 0 0 eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 40 0 0 lo
0.0.0.0 192.245.33.1 0.0.0.0 UG 40 0 0 eth0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
[xxxxxxx zebra-0.92a]$ ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:50:8B:8E:1E:D8
inet addr:192.245.33.5 Bcast:192.245.33.255 Mask:255.255.255.0
EtherTalk Phase 2 addr:65280/3
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:29412617 errors:17 dropped:0 overruns:0 frame:17
TX packets:11875202 errors:12026 dropped:0 overruns:0 carrier:12026
collisions:671194
RX bytes:2041568686 (1946.9 Mb) TX bytes:3915694701 (3734.2 Mb)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
EtherTalk Phase 2 addr:0/0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:113253 errors:0 dropped:0 overruns:0 frame:0
TX packets:113253 errors:0 dropped:0 overruns:0 carrier:0
collisions:0
RX bytes:52910410 (50.4 Mb) TX bytes:52910410 (50.4 Mb)
vmnet1 Link encap:Ethernet HWaddr 00:50:56:C0:00:01
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
vmnet8 Link encap:Ethernet HWaddr 00:50:56:C0:00:08
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Sincerely,
Anthony Schirripa
Software Developer
Cybernet Systems Corporation
727 Airport Blvd.
Ann Arbor, MI 48108
PHONE (734) 668-2567 x121
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
# Generated automatically using autoconf version 2.13
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
# Defaults:
ac_help=
ac_default_prefix=/usr/local
# Any additions from configure.in:
ac_help="$ac_help
--enable-vtysh, Make integrated VTY version of zebra"
ac_help="$ac_help
--disable-ipv6 turn off IPv6 related features and daemons"
ac_help="$ac_help
--disable-zebra do not build zebra daemon"
ac_help="$ac_help
--disable-bgpd do not build bgpd"
ac_help="$ac_help
--disable-ripd do not build ripd"
ac_help="$ac_help
--disable-ripngd do not build ripngd"
ac_help="$ac_help
--disable-ospfd do not build ospfd"
ac_help="$ac_help
--disable-ospf6d do not build ospf6d"
ac_help="$ac_help
--disable-bgp-announce, turn off BGP route announcement"
ac_help="$ac_help
--enable-netlink force to use Linux netlink interface"
ac_help="$ac_help
--enable-broken-aliases enable aliases as distinct interfaces for Linux 2.2.X"
ac_help="$ac_help
--enable-snmp enable SNMP support"
ac_help="$ac_help
--with-libpam use libpam for PAM support in vtysh"
ac_help="$ac_help
--enable-tcp-zebra enable TCP/IP socket connection between zebra and
protocol daemon"
ac_help="$ac_help
--enable-nssa enable OSPF NSSA option"
ac_help="$ac_help
--enable-multipath=ARG enable multipath function, ARG must be digit"
# Initialize some variables set by options.
# The variables have the same names as the options, with
# dashes changed to underlines.
build=NONE
cache_file=./config.cache
exec_prefix=NONE
host=NONE
no_create=
nonopt=NONE
no_recursion=
prefix=NONE
program_prefix=NONE
program_suffix=NONE
program_transform_name=s,x,x,
silent=
site=
srcdir=
target=NONE
verbose=
x_includes=NONE
x_libraries=NONE
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
datadir='${prefix}/share'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
libdir='${exec_prefix}/lib'
includedir='${prefix}/include'
oldincludedir='/usr/include'
infodir='${prefix}/info'
mandir='${prefix}/man'
# Initialize some other variables.
subdirs=
MFLAGS= MAKEFLAGS=
SHELL=${CONFIG_SHELL-/bin/sh}
# Maximum number of lines to put in a shell here document.
ac_max_here_lines=12
ac_prev=
for ac_option
do
# If the previous option needs an argument, assign it.
if test -n "$ac_prev"; then
eval "$ac_prev=\$ac_option"
ac_prev=
continue
fi
case "$ac_option" in
-*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
*) ac_optarg= ;;
esac
# Accept the important Cygnus configure options, so we can diagnose typos.
case "$ac_option" in
-bindir | --bindir | --bindi | --bind | --bin | --bi)
ac_prev=bindir ;;
-bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
bindir="$ac_optarg" ;;
-build | --build | --buil | --bui | --bu)
ac_prev=build ;;
-build=* | --build=* | --buil=* | --bui=* | --bu=*)
build="$ac_optarg" ;;
-cache-file | --cache-file | --cache-fil | --cache-fi \
| --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
ac_prev=cache_file ;;
-cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
| --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
cache_file="$ac_optarg" ;;
-datadir | --datadir | --datadi | --datad | --data | --dat | --da)
ac_prev=datadir ;;
-datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
| --da=*)
datadir="$ac_optarg" ;;
-disable-* | --disable-*)
ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
{ echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit
1; }
fi
ac_feature=`echo $ac_feature| sed 's/-/_/g'`
eval "enable_${ac_feature}=no" ;;
-enable-* | --enable-*)
ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
{ echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit
1; }
fi
ac_feature=`echo $ac_feature| sed 's/-/_/g'`
case "$ac_option" in
*=*) ;;
*) ac_optarg=yes ;;
esac
eval "enable_${ac_feature}='$ac_optarg'" ;;
-exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
| --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
| --exec | --exe | --ex)
ac_prev=exec_prefix ;;
-exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
| --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
| --exec=* | --exe=* | --ex=*)
exec_prefix="$ac_optarg" ;;
-gas | --gas | --ga | --g)
# Obsolete; use --with-gas.
with_gas=yes ;;
-help | --help | --hel | --he)
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat << EOF
Usage: configure [options] [host]
Options: [defaults in brackets after descriptions]
Configuration:
--cache-file=FILE cache test results in FILE
--help print this message
--no-create do not create output files
--quiet, --silent do not print \`checking...' messages
--version print the version of autoconf that created configure
Directory and file names:
--prefix=PREFIX install architecture-independent files in PREFIX
[$ac_default_prefix]
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
[same as prefix]
--bindir=DIR user executables in DIR [EPREFIX/bin]
--sbindir=DIR system admin executables in DIR [EPREFIX/sbin]
--libexecdir=DIR program executables in DIR [EPREFIX/libexec]
--datadir=DIR read-only architecture-independent data in DIR
[PREFIX/share]
--sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data in DIR
[PREFIX/com]
--localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var]
--libdir=DIR object code libraries in DIR [EPREFIX/lib]
--includedir=DIR C header files in DIR [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc in DIR [/usr/include]
--infodir=DIR info documentation in DIR [PREFIX/info]
--mandir=DIR man documentation in DIR [PREFIX/man]
--srcdir=DIR find the sources in DIR [configure dir or ..]
--program-prefix=PREFIX prepend PREFIX to installed program names
--program-suffix=SUFFIX append SUFFIX to installed program names
--program-transform-name=PROGRAM
run sed PROGRAM on installed program names
EOF
cat << EOF
Host type:
--build=BUILD configure for building on BUILD [BUILD=HOST]
--host=HOST configure for HOST [guessed]
--target=TARGET configure for TARGET [TARGET=HOST]
Features and packages:
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--x-includes=DIR X include files are in DIR
--x-libraries=DIR X library files are in DIR
EOF
if test -n "$ac_help"; then
echo "--enable and --with options recognized:$ac_help"
fi
exit 0 ;;
-host | --host | --hos | --ho)
ac_prev=host ;;
-host=* | --host=* | --hos=* | --ho=*)
host="$ac_optarg" ;;
-includedir | --includedir | --includedi | --included | --include \
| --includ | --inclu | --incl | --inc)
ac_prev=includedir ;;
-includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
| --includ=* | --inclu=* | --incl=* | --inc=*)
includedir="$ac_optarg" ;;
-infodir | --infodir | --infodi | --infod | --info | --inf)
ac_prev=infodir ;;
-infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
infodir="$ac_optarg" ;;
-libdir | --libdir | --libdi | --libd)
ac_prev=libdir ;;
-libdir=* | --libdir=* | --libdi=* | --libd=*)
libdir="$ac_optarg" ;;
-libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
| --libexe | --libex | --libe)
ac_prev=libexecdir ;;
-libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
| --libexe=* | --libex=* | --libe=*)
libexecdir="$ac_optarg" ;;
-localstatedir | --localstatedir | --localstatedi | --localstated \
| --localstate | --localstat | --localsta | --localst \
| --locals | --local | --loca | --loc | --lo)
ac_prev=localstatedir ;;
-localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
| --localstate=* | --localstat=* | --localsta=* | --localst=* \
| --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
localstatedir="$ac_optarg" ;;
-mandir | --mandir | --mandi | --mand | --man | --ma | --m)
ac_prev=mandir ;;
-mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
mandir="$ac_optarg" ;;
-nfp | --nfp | --nf)
# Obsolete; use --without-fp.
with_fp=no ;;
-no-create | --no-create | --no-creat | --no-crea | --no-cre \
| --no-cr | --no-c)
no_create=yes ;;
-no-recursion | --no-recursion | --no-recursio | --no-recursi \
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
no_recursion=yes ;;
-oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
| --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
| --oldin | --oldi | --old | --ol | --o)
ac_prev=oldincludedir ;;
-oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
| --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
| --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
oldincludedir="$ac_optarg" ;;
-prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
ac_prev=prefix ;;
-prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
prefix="$ac_optarg" ;;
-program-prefix | --program-prefix | --program-prefi | --program-pref \
| --program-pre | --program-pr | --program-p)
ac_prev=program_prefix ;;
-program-prefix=* | --program-prefix=* | --program-prefi=* \
| --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
program_prefix="$ac_optarg" ;;
-program-suffix | --program-suffix | --program-suffi | --program-suff \
| --program-suf | --program-su | --program-s)
ac_prev=program_suffix ;;
-program-suffix=* | --program-suffix=* | --program-suffi=* \
| --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
program_suffix="$ac_optarg" ;;
-program-transform-name | --program-transform-name \
| --program-transform-nam | --program-transform-na \
| --program-transform-n | --program-transform- \
| --program-transform | --program-transfor \
| --program-transfo | --program-transf \
| --program-trans | --program-tran \
| --progr-tra | --program-tr | --program-t)
ac_prev=program_transform_name ;;
-program-transform-name=* | --program-transform-name=* \
| --program-transform-nam=* | --program-transform-na=* \
| --program-transform-n=* | --program-transform-=* \
| --program-transform=* | --program-transfor=* \
| --program-transfo=* | --program-transf=* \
| --program-trans=* | --program-tran=* \
| --progr-tra=* | --program-tr=* | --program-t=*)
program_transform_name="$ac_optarg" ;;
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil)
silent=yes ;;
-sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
ac_prev=sbindir ;;
-sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
| --sbi=* | --sb=*)
sbindir="$ac_optarg" ;;
-sharedstatedir | --sharedstatedir | --sharedstatedi \
| --sharedstated | --sharedstate | --sharedstat | --sharedsta \
| --sharedst | --shareds | --shared | --share | --shar \
| --sha | --sh)
ac_prev=sharedstatedir ;;
-sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
| --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
| --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
| --sha=* | --sh=*)
sharedstatedir="$ac_optarg" ;;
-site | --site | --sit)
ac_prev=site ;;
-site=* | --site=* | --sit=*)
site="$ac_optarg" ;;
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
srcdir="$ac_optarg" ;;
-sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
| --syscon | --sysco | --sysc | --sys | --sy)
ac_prev=sysconfdir ;;
-sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
| --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
sysconfdir="$ac_optarg" ;;
-target | --target | --targe | --targ | --tar | --ta | --t)
ac_prev=target ;;
-target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
target="$ac_optarg" ;;
-v | -verbose | --verbose | --verbos | --verbo | --verb)
verbose=yes ;;
-version | --version | --versio | --versi | --vers)
echo "configure generated by autoconf version 2.13"
exit 0 ;;
-with-* | --with-*)
ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
{ echo "configure: error: $ac_package: invalid package name" 1>&2; exit
1; }
fi
ac_package=`echo $ac_package| sed 's/-/_/g'`
case "$ac_option" in
*=*) ;;
*) ac_optarg=yes ;;
esac
eval "with_${ac_package}='$ac_optarg'" ;;
-without-* | --without-*)
ac_package=`echo $ac_option|sed -e 's/-*without-//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
{ echo "configure: error: $ac_package: invalid package name" 1>&2; exit
1; }
fi
ac_package=`echo $ac_package| sed 's/-/_/g'`
eval "with_${ac_package}=no" ;;
--x)
# Obsolete; use --with-x.
with_x=yes ;;
-x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
| --x-incl | --x-inc | --x-in | --x-i)
ac_prev=x_includes ;;
-x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
| --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
x_includes="$ac_optarg" ;;
-x-libraries | --x-libraries | --x-librarie | --x-librari \
| --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
ac_prev=x_libraries ;;
-x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
x_libraries="$ac_optarg" ;;
-*) { echo "configure: error: $ac_option: invalid option; use --help to show
usage" 1>&2; exit 1; }
;;
*)
if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
echo "configure: warning: $ac_option: invalid host type" 1>&2
fi
if test "x$nonopt" != xNONE; then
{ echo "configure: error: can only configure for one host and one target
at a time" 1>&2; exit 1; }
fi
nonopt="$ac_option"
;;
esac
done
if test -n "$ac_prev"; then
{ echo "configure: error: missing argument to --`echo $ac_prev | sed
's/_/-/g'`" 1>&2; exit 1; }
fi
trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1
2 15
# File descriptor usage:
# 0 standard input
# 1 file creation
# 2 errors and warnings
# 3 some systems may open it to /dev/tty
# 4 used on the Kubota Titan
# 6 checking for... messages and results
# 5 compiler messages saved in config.log
if test "$silent" = yes; then
exec 6>/dev/null
else
exec 6>&1
fi
exec 5>./config.log
echo "\
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
" 1>&5
# Strip out --no-create and --no-recursion so they do not pile up.
# Also quote any args containing shell metacharacters.
ac_configure_args=
for ac_arg
do
case "$ac_arg" in
-no-create | --no-create | --no-creat | --no-crea | --no-cre \
| --no-cr | --no-c) ;;
-no-recursion | --no-recursion | --no-recursio | --no-recursi \
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
*" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
ac_configure_args="$ac_configure_args '$ac_arg'" ;;
*) ac_configure_args="$ac_configure_args $ac_arg" ;;
esac
done
# NLS nuisances.
# Only set these to C if already set. These must not be set unconditionally
# because not all systems understand e.g. LANG=C (notably SCO).
# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
# Non-C LC_CTYPE values break the ctype check.
if test "${LANG+set}" = set; then LANG=C; export LANG; fi
if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
# AIX cpp loses on an empty file, so make sure it contains at least a newline.
echo > confdefs.h
# A filename unique to this package, relative to the directory that
# configure is in, which we can look for to find out if srcdir is correct.
ac_unique_file=lib/zebra.h
# Find the source files, if location was not specified.
if test -z "$srcdir"; then
ac_srcdir_defaulted=yes
# Try the directory containing this script, then its parent.
ac_prog=$0
ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
srcdir=$ac_confdir
if test ! -r $srcdir/$ac_unique_file; then
srcdir=..
fi
else
ac_srcdir_defaulted=no
fi
if test ! -r $srcdir/$ac_unique_file; then
if test "$ac_srcdir_defaulted" = yes; then
{ echo "configure: error: can not find sources in $ac_confdir or .." 1>&2;
exit 1; }
else
{ echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
fi
fi
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
# Prefer explicitly selected file to automatically selected ones.
if test -z "$CONFIG_SITE"; then
if test "x$prefix" != xNONE; then
CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
else
CONFIG_SITE="$ac_default_prefix/share/config.site
$ac_default_prefix/etc/config.site"
fi
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
echo "loading site script $ac_site_file"
. "$ac_site_file"
fi
done
if test -r "$cache_file"; then
echo "loading cache $cache_file"
. $cache_file
else
echo "creating cache $cache_file"
> $cache_file
fi
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS
conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
ac_exeext=
ac_objext=o
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
# Stardent Vistra SVR4 grep lacks -e, says address@hidden
if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
ac_n= ac_c='
' ac_t=' '
else
ac_n=-n ac_c= ac_t=
fi
else
ac_n= ac_c='\c' ac_t=
fi
ac_aux_dir=
for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
if test -f $ac_dir/install-sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install-sh -c"
break
elif test -f $ac_dir/install.sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install.sh -c"
break
fi
done
if test -z "$ac_aux_dir"; then
{ echo "configure: error: can not find install-sh or install.sh in $srcdir
$srcdir/.. $srcdir/../.." 1>&2; exit 1; }
fi
ac_config_guess=$ac_aux_dir/config.guess
ac_config_sub=$ac_aux_dir/config.sub
ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
# incompatible versions:
# SysV /etc/install, /usr/sbin/install
# SunOS /usr/etc/install
# IRIX /sbin/install
# AIX /bin/install
# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
echo "configure:588: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
for ac_dir in $PATH; do
# Account for people who put trailing slashes in PATH elements.
case "$ac_dir/" in
/|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*)
;;
*)
# OSF1 and SCO ODT 3.0 have their own names for install.
# Don't use installbsd from OSF since it installs stuff as root
# by default.
for ac_prog in ginstall scoinst install; do
if test -f $ac_dir/$ac_prog; then
if test $ac_prog = install &&
grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
# AIX install. It has an incompatible calling convention.
:
else
ac_cv_path_install="$ac_dir/$ac_prog -c"
break 2
fi
fi
done
;;
esac
done
IFS="$ac_save_IFS"
fi
if test "${ac_cv_path_install+set}" = set; then
INSTALL="$ac_cv_path_install"
else
# As a last resort, use the slow shell script. We don't cache a
# path for INSTALL within a source directory, because that will
# break other packages using the cache if that directory is
# removed, or if the path is relative.
INSTALL="$ac_install_sh"
fi
fi
echo "$ac_t""$INSTALL" 1>&6
# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
echo "configure:641: checking whether build environment is sane" >&5
# Just in case
sleep 1
echo timestamp > conftestfile
# Do `set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
if test "$*" = "X"; then
# -L didn't work.
set X `ls -t $srcdir/configure conftestfile`
fi
if test "$*" != "X $srcdir/configure conftestfile" \
&& test "$*" != "X conftestfile $srcdir/configure"; then
# If neither matched, then we have a broken ls. This can happen
# if, for instance, CONFIG_SHELL is bash and it inherits a
# broken ls alias from the environment. This has actually
# happened. Such a system could not be considered "sane".
{ echo "configure: error: ls -t appears to fail. Make sure there is not
a broken
alias in your environment" 1>&2; exit 1; }
fi
test "$2" = conftestfile
)
then
# Ok.
:
else
{ echo "configure: error: newly created file is older than distributed files!
Check your system clock" 1>&2; exit 1; }
fi
rm -f conftest*
echo "$ac_t""yes" 1>&6
if test "$program_transform_name" = s,x,x,; then
program_transform_name=
else
# Double any \ or $. echo might interpret backslashes.
cat <<\EOF_SED > conftestsed
s,\\,\\\\,g; s,\$,$$,g
EOF_SED
program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
rm -f conftestsed
fi
test "$program_prefix" != NONE &&
program_transform_name="s,^,${program_prefix},; $program_transform_name"
# Use a double $ so make ignores it.
test "$program_suffix" != NONE &&
program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
# sed with no file args requires a program.
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
echo "configure:698: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set";
then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftestmake <<\EOF
all:
@echo 'ac_maketemp="${MAKE}"'
EOF
# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
if test -n "$ac_maketemp"; then
eval ac_cv_prog_make_${ac_make}_set=yes
else
eval ac_cv_prog_make_${ac_make}_set=no
fi
rm -f conftestmake
fi
if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
echo "$ac_t""yes" 1>&6
SET_MAKE=
else
echo "$ac_t""no" 1>&6
SET_MAKE="MAKE=${MAKE-make}"
fi
PACKAGE=zebra
VERSION=0.89
if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
{ echo "configure: error: source directory already configured; run "make
distclean" there first" 1>&2; exit 1; }
fi
cat >> confdefs.h <<EOF
#define PACKAGE "$PACKAGE"
EOF
cat >> confdefs.h <<EOF
#define VERSION "$VERSION"
EOF
missing_dir=`cd $ac_aux_dir && pwd`
echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
echo "configure:744: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
if (aclocal --version) < /dev/null > /dev/null 2>&1; then
ACLOCAL=aclocal
echo "$ac_t""found" 1>&6
else
ACLOCAL="$missing_dir/missing aclocal"
echo "$ac_t""missing" 1>&6
fi
echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
echo "configure:757: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
if (autoconf --version) < /dev/null > /dev/null 2>&1; then
AUTOCONF=autoconf
echo "$ac_t""found" 1>&6
else
AUTOCONF="$missing_dir/missing autoconf"
echo "$ac_t""missing" 1>&6
fi
echo $ac_n "checking for working automake""... $ac_c" 1>&6
echo "configure:770: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
if (automake --version) < /dev/null > /dev/null 2>&1; then
AUTOMAKE=automake
echo "$ac_t""found" 1>&6
else
AUTOMAKE="$missing_dir/missing automake"
echo "$ac_t""missing" 1>&6
fi
echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
echo "configure:783: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
if (autoheader --version) < /dev/null > /dev/null 2>&1; then
AUTOHEADER=autoheader
echo "$ac_t""found" 1>&6
else
AUTOHEADER="$missing_dir/missing autoheader"
echo "$ac_t""missing" 1>&6
fi
echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
echo "configure:796: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
MAKEINFO=makeinfo
echo "$ac_t""found" 1>&6
else
MAKEINFO="$missing_dir/missing makeinfo"
echo "$ac_t""missing" 1>&6
fi
# Get macros
# Make sure we can run config.sub.
if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
echo "configure:826: checking host system type" >&5
host_alias=$host
case "$host_alias" in
NONE)
case $nonopt in
NONE)
if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
else { echo "configure: error: can not guess host type; you must specify
one" 1>&2; exit 1; }
fi ;;
*) host_alias=$nonopt ;;
esac ;;
esac
host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6
test -n "$CFLAGS" && cflags_specified=yes
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:852: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_CC="gcc"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
echo "$ac_t""$CC" 1>&6
else
echo "$ac_t""no" 1>&6
fi
if test -z "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:882: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_prog_rejected=no
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
ac_prog_rejected=yes
continue
fi
ac_cv_prog_CC="cc"
break
fi
done
IFS="$ac_save_ifs"
if test $ac_prog_rejected = yes; then
# We found a bogon in the path, so make sure we never use it.
set dummy $ac_cv_prog_CC
shift
if test $# -gt 0; then
# We chose a different compiler from the bogus one.
# However, it has the same basename, so the bogon will be chosen
# first if we set CC to just the basename; use the full file name.
shift
set dummy "$ac_dir/$ac_word" "$@"
shift
ac_cv_prog_CC="$@"
fi
fi
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
echo "$ac_t""$CC" 1>&6
else
echo "$ac_t""no" 1>&6
fi
if test -z "$CC"; then
case "`uname -s`" in
*win32* | *WIN32*)
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:933: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_CC="cl"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
echo "$ac_t""$CC" 1>&6
else
echo "$ac_t""no" 1>&6
fi
;;
esac
fi
test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH"
1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""...
$ac_c" 1>&6
echo "configure:965: checking whether the C compiler ($CC $CFLAGS $LDFLAGS)
works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS
conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext << EOF
#line 976 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
if { (eval echo configure:981: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } &&
test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
ac_cv_prog_cc_cross=no
else
ac_cv_prog_cc_cross=yes
fi
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_cv_prog_cc_works=no
fi
rm -fr conftest*
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS
conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
if test $ac_cv_prog_cc_works = no; then
{ echo "configure: error: installation or configuration problem: C compiler
cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a
cross-compiler""... $ac_c" 1>&6
echo "configure:1007: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is
a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
echo "configure:1012: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.c <<EOF
#ifdef __GNUC__
yes;
#endif
EOF
if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1021: \"$ac_try\")
1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
fi
fi
echo "$ac_t""$ac_cv_prog_gcc" 1>&6
if test $ac_cv_prog_gcc = yes; then
GCC=yes
else
GCC=
fi
ac_test_CFLAGS="${CFLAGS+set}"
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
echo "configure:1040: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo 'void f(){}' > conftest.c
if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
ac_cv_prog_cc_g=yes
else
ac_cv_prog_cc_g=no
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
if test "$ac_test_CFLAGS" = set; then
CFLAGS="$ac_save_CFLAGS"
elif test $ac_cv_prog_cc_g = yes; then
if test "$GCC" = yes; then
CFLAGS="-g -O2"
else
CFLAGS="-g"
fi
else
if test "$GCC" = yes; then
CFLAGS="-O2"
else
CFLAGS=
fi
fi
if test "x$cflags_specified" = "x"
then
CFLAGS="$CFLAGS -Wall"
fi
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
echo "configure:1078: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
fi
if test -z "$CPP"; then
if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# This must be in double quotes, not single quotes, because CPP may get
# substituted into the Makefile and "${CC-cc}" will confuse make.
CPP="${CC-cc} -E"
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
#line 1093 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1099: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
else
echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
#line 1110 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1116: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
else
echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
#line 1127 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1133: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
else
echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
CPP=/lib/cpp
fi
rm -f conftest*
fi
rm -f conftest*
fi
rm -f conftest*
ac_cv_prog_CPP="$CPP"
fi
CPP="$ac_cv_prog_CPP"
else
ac_cv_prog_CPP="$CPP"
fi
echo "$ac_t""$CPP" 1>&6
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
# incompatible versions:
# SysV /etc/install, /usr/sbin/install
# SunOS /usr/etc/install
# IRIX /sbin/install
# AIX /bin/install
# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
echo "configure:1169: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
for ac_dir in $PATH; do
# Account for people who put trailing slashes in PATH elements.
case "$ac_dir/" in
/|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*)
;;
*)
# OSF1 and SCO ODT 3.0 have their own names for install.
# Don't use installbsd from OSF since it installs stuff as root
# by default.
for ac_prog in ginstall scoinst install; do
if test -f $ac_dir/$ac_prog; then
if test $ac_prog = install &&
grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
# AIX install. It has an incompatible calling convention.
:
else
ac_cv_path_install="$ac_dir/$ac_prog -c"
break 2
fi
fi
done
;;
esac
done
IFS="$ac_save_IFS"
fi
if test "${ac_cv_path_install+set}" = set; then
INSTALL="$ac_cv_path_install"
else
# As a last resort, use the slow shell script. We don't cache a
# path for INSTALL within a source directory, because that will
# break other packages using the cache if that directory is
# removed, or if the path is relative.
INSTALL="$ac_install_sh"
fi
fi
echo "$ac_t""$INSTALL" 1>&6
# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
echo "configure:1222: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set";
then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftestmake <<\EOF
all:
@echo 'ac_maketemp="${MAKE}"'
EOF
# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
if test -n "$ac_maketemp"; then
eval ac_cv_prog_make_${ac_make}_set=yes
else
eval ac_cv_prog_make_${ac_make}_set=no
fi
rm -f conftestmake
fi
if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
echo "$ac_t""yes" 1>&6
SET_MAKE=
else
echo "$ac_t""no" 1>&6
SET_MAKE="MAKE=${MAKE-make}"
fi
echo $ac_n "checking build system type""... $ac_c" 1>&6
echo "configure:1249: checking build system type" >&5
build_alias=$build
case "$build_alias" in
NONE)
case $nonopt in
NONE) build_alias=$host_alias ;;
*) build_alias=$nonopt ;;
esac ;;
esac
build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$build" 1>&6
if test $host != $build; then
ac_tool_prefix=${host_alias}-
else
ac_tool_prefix=
fi
# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name
with args.
set dummy ${ac_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1275: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$AR"; then
ac_cv_prog_AR="$AR" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_AR="${ac_tool_prefix}ar"
break
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
fi
fi
AR="$ac_cv_prog_AR"
if test -n "$AR"; then
echo "$ac_t""$AR" 1>&6
else
echo "$ac_t""no" 1>&6
fi
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program
name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1307: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$RANLIB"; then
ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
RANLIB="$ac_cv_prog_RANLIB"
if test -n "$RANLIB"; then
echo "$ac_t""$RANLIB" 1>&6
else
echo "$ac_t""no" 1>&6
fi
if test -z "$ac_cv_prog_RANLIB"; then
if test -n "$ac_tool_prefix"; then
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
echo "configure:1339: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$RANLIB"; then
ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_RANLIB="ranlib"
break
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
fi
fi
RANLIB="$ac_cv_prog_RANLIB"
if test -n "$RANLIB"; then
echo "$ac_t""$RANLIB" 1>&6
else
echo "$ac_t""no" 1>&6
fi
else
RANLIB=":"
fi
fi
echo $ac_n "checking for AIX""... $ac_c" 1>&6
echo "configure:1373: checking for AIX" >&5
cat > conftest.$ac_ext <<EOF
#line 1375 "configure"
#include "confdefs.h"
#ifdef _AIX
yes
#endif
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
egrep "yes" >/dev/null 2>&1; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6; cat >> confdefs.h <<\EOF
#define _ALL_SOURCE 1
EOF
else
rm -rf conftest*
echo "$ac_t""no" 1>&6
fi
rm -f conftest*
# Check whether --enable-vtysh or --disable-vtysh was given.
if test "${enable_vtysh+set}" = set; then
enableval="$enable_vtysh"
:
fi
# Check whether --enable-ipv6 or --disable-ipv6 was given.
if test "${enable_ipv6+set}" = set; then
enableval="$enable_ipv6"
:
fi
# Check whether --enable-zebra or --disable-zebra was given.
if test "${enable_zebra+set}" = set; then
enableval="$enable_zebra"
:
fi
# Check whether --enable-bgpd or --disable-bgpd was given.
if test "${enable_bgpd+set}" = set; then
enableval="$enable_bgpd"
:
fi
# Check whether --enable-ripd or --disable-ripd was given.
if test "${enable_ripd+set}" = set; then
enableval="$enable_ripd"
:
fi
# Check whether --enable-ripngd or --disable-ripngd was given.
if test "${enable_ripngd+set}" = set; then
enableval="$enable_ripngd"
:
fi
# Check whether --enable-ospfd or --disable-ospfd was given.
if test "${enable_ospfd+set}" = set; then
enableval="$enable_ospfd"
:
fi
# Check whether --enable-ospf6d or --disable-ospf6d was given.
if test "${enable_ospf6d+set}" = set; then
enableval="$enable_ospf6d"
:
fi
# Check whether --enable-bgp-announce or --disable-bgp-announce was given.
if test "${enable_bgp_announce+set}" = set; then
enableval="$enable_bgp_announce"
:
fi
# Check whether --enable-netlink or --disable-netlink was given.
if test "${enable_netlink+set}" = set; then
enableval="$enable_netlink"
:
fi
# Check whether --enable-broken-aliases or --disable-broken-aliases was given.
if test "${enable_broken_aliases+set}" = set; then
enableval="$enable_broken_aliases"
:
fi
# Check whether --enable-snmp or --disable-snmp was given.
if test "${enable_snmp+set}" = set; then
enableval="$enable_snmp"
:
fi
# Check whether --with-libpam or --without-libpam was given.
if test "${with_libpam+set}" = set; then
withval="$with_libpam"
:
fi
# Check whether --enable-tcpsock or --disable-tcpsock was given.
if test "${enable_tcpsock+set}" = set; then
enableval="$enable_tcpsock"
:
fi
# Check whether --enable-nssa or --disable-nssa was given.
if test "${enable_nssa+set}" = set; then
enableval="$enable_nssa"
:
fi
# Check whether --enable-multipath or --disable-multipath was given.
if test "${enable_multipath+set}" = set; then
enableval="$enable_multipath"
:
fi
if test "${enable_broken_aliases}" = "yes"; then
if test "${enable_netlink}" = "yes"
then
echo "Sorry, you can't use netlink with broken aliases"
exit 1
fi
cat >> confdefs.h <<\EOF
#define HAVE_BROKEN_ALIASES 1
EOF
enable_netlink=no
fi
if test "${enable_tcp_zebra}" = "yes"; then
cat >> confdefs.h <<\EOF
#define HAVE_TCP_ZEBRA 1
EOF
fi
if test "${enable_nssa}" = "yes"; then
cat >> confdefs.h <<\EOF
#define HAVE_NSSA 1
EOF
fi
MULTIPATH_NUM=1
case "${enable_multipath}" in
[0-9]|[1-9][0-9])
MULTIPATH_NUM="${enable_multipath}"
;;
"")
;;
*)
echo "Please specify digit to --enable-multipath ARG."
exit 1
;;
esac
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
echo "configure:1540: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 1545 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <string.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1553: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
ac_cv_header_stdc=yes
else
echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
ac_cv_header_stdc=no
fi
rm -f conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
#line 1570 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
egrep "memchr" >/dev/null 2>&1; then
:
else
rm -rf conftest*
ac_cv_header_stdc=no
fi
rm -f conftest*
fi
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
#line 1588 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
egrep "free" >/dev/null 2>&1; then
:
else
rm -rf conftest*
ac_cv_header_stdc=no
fi
rm -f conftest*
fi
if test $ac_cv_header_stdc = yes; then
# /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
if test "$cross_compiling" = yes; then
:
else
cat > conftest.$ac_ext <<EOF
#line 1609 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
int main () { int i; for (i = 0; i < 256; i++)
if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
exit (0); }
EOF
if { (eval echo configure:1620: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } &&
test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -fr conftest*
ac_cv_header_stdc=no
fi
rm -fr conftest*
fi
fi
fi
echo "$ac_t""$ac_cv_header_stdc" 1>&6
if test $ac_cv_header_stdc = yes; then
cat >> confdefs.h <<\EOF
#define STDC_HEADERS 1
EOF
fi
for ac_hdr in string.h stropts.h sys/conf.h sys/ksym.h sys/time.h sys/times.h
sys/select.h sys/sysctl.h sys/sockio.h sys/types.h net/if_dl.h net/if_var.h
linux/version.h kvm.h netdb.h netinet/in.h net/netopt.h netinet/in_var.h
netinet/in6_var.h netinet/in6.h inet/nd.h asm/types.h linux/rtnetlink.h
netinet/icmp6.h libutil.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
echo "configure:1647: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 1652 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1657: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
else
echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_hdr=HAVE_`echo $ac_hdr | sed
'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
else
echo "$ac_t""no" 1>&6
fi
done
echo $ac_n "checking for working const""... $ac_c" 1>&6
echo "configure:1685: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 1690 "configure"
#include "confdefs.h"
int main() {
/* Ultrix mips cc rejects this. */
typedef int charset[2]; const charset x;
/* SunOS 4.1.1 cc rejects this. */
char const *const *ccp;
char **p;
/* NEC SVR4.0.2 mips cc rejects this. */
struct point {int x, y;};
static struct point const zero = {0,0};
/* AIX XL C 1.02.0.0 rejects this.
It does not let you subtract one const X* pointer from another in an arm
of an if-expression whose if-part is not a constant expression */
const char *g = "string";
ccp = &g + (g ? g-g : 0);
/* HPUX 7.0 cc rejects these. */
++ccp;
p = (char**) ccp;
ccp = (char const *const *) p;
{ /* SCO 3.2v4 cc rejects this. */
char *t;
char const *s = 0 ? (char *) 0 : (char const *) 0;
*t++ = 0;
}
{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
int x[] = {25, 17};
const int *foo = &x[0];
++foo;
}
{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
typedef const int *iptr;
iptr p = 0;
++p;
}
{ /* AIX XL C 1.02.0.0 rejects this saying
"k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
struct s { int j; const int *ap[3]; };
struct s *b; b->j = 5;
}
{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
const int foo = 10;
}
; return 0; }
EOF
if { (eval echo configure:1739: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5;
}; then
rm -rf conftest*
ac_cv_c_const=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
ac_cv_c_const=no
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_c_const" 1>&6
if test $ac_cv_c_const = no; then
cat >> confdefs.h <<\EOF
#define const
EOF
fi
echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
echo "configure:1760: checking return type of signal handlers" >&5
if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 1765 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <signal.h>
#ifdef signal
#undef signal
#endif
#ifdef __cplusplus
extern "C" void (*signal (int, void (*)(int)))(int);
#else
void (*signal ()) ();
#endif
int main() {
int i;
; return 0; }
EOF
if { (eval echo configure:1782: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5;
}; then
rm -rf conftest*
ac_cv_type_signal=void
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
ac_cv_type_signal=int
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_type_signal" 1>&6
cat >> confdefs.h <<EOF
#define RETSIGTYPE $ac_cv_type_signal
EOF
case "$host" in
*-sunos5.6* | *-solaris2.6*)
opsys=sol2-6
cat >> confdefs.h <<\EOF
#define SUNOS_5 1
EOF
echo $ac_n "checking for main in -lxnet""... $ac_c" 1>&6
echo "configure:1809: checking for main in -lxnet" >&5
ac_lib_var=`echo xnet'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lxnet $LIBS"
cat > conftest.$ac_ext <<EOF
#line 1817 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
if { (eval echo configure:1824: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } &&
test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_lib=HAVE_LIB`echo xnet | sed -e 's/[^a-zA-Z0-9_]/_/g' \
-e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
cat >> confdefs.h <<EOF
#define $ac_tr_lib 1
EOF
LIBS="-lxnet $LIBS"
else
echo "$ac_t""no" 1>&6
fi
CURSES=-lcurses
;;
*-sunos5* | *-solaris2*)
cat >> confdefs.h <<\EOF
#define SUNOS_5 1
EOF
echo $ac_n "checking for main in -lsocket""... $ac_c" 1>&6
echo "configure:1859: checking for main in -lsocket" >&5
ac_lib_var=`echo socket'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lsocket $LIBS"
cat > conftest.$ac_ext <<EOF
#line 1867 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
if { (eval echo configure:1874: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } &&
test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_lib=HAVE_LIB`echo socket | sed -e 's/[^a-zA-Z0-9_]/_/g' \
-e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
cat >> confdefs.h <<EOF
#define $ac_tr_lib 1
EOF
LIBS="-lsocket $LIBS"
else
echo "$ac_t""no" 1>&6
fi
echo $ac_n "checking for main in -lnsl""... $ac_c" 1>&6
echo "configure:1902: checking for main in -lnsl" >&5
ac_lib_var=`echo nsl'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lnsl $LIBS"
cat > conftest.$ac_ext <<EOF
#line 1910 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
if { (eval echo configure:1917: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } &&
test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_lib=HAVE_LIB`echo nsl | sed -e 's/[^a-zA-Z0-9_]/_/g' \
-e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
cat >> confdefs.h <<EOF
#define $ac_tr_lib 1
EOF
LIBS="-lnsl $LIBS"
else
echo "$ac_t""no" 1>&6
fi
CURSES=-lcurses
;;
*-linux-*)
opsys=gnu-linux
cat >> confdefs.h <<\EOF
#define GNU_LINUX 1
EOF
;;
*-nec-sysv4*)
echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6
echo "configure:1955: checking for gethostbyname in -lnsl" >&5
ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lnsl $LIBS"
cat > conftest.$ac_ext <<EOF
#line 1963 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char gethostbyname();
int main() {
gethostbyname()
; return 0; }
EOF
if { (eval echo configure:1974: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } &&
test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_lib=HAVE_LIB`echo nsl | sed -e 's/[^a-zA-Z0-9_]/_/g' \
-e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
cat >> confdefs.h <<EOF
#define $ac_tr_lib 1
EOF
LIBS="-lnsl $LIBS"
else
echo "$ac_t""no" 1>&6
fi
echo $ac_n "checking for socket in -lsocket""... $ac_c" 1>&6
echo "configure:2002: checking for socket in -lsocket" >&5
ac_lib_var=`echo socket'_'socket | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lsocket $LIBS"
cat > conftest.$ac_ext <<EOF
#line 2010 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char socket();
int main() {
socket()
; return 0; }
EOF
if { (eval echo configure:2021: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } &&
test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_lib=HAVE_LIB`echo socket | sed -e 's/[^a-zA-Z0-9_]/_/g' \
-e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
cat >> confdefs.h <<EOF
#define $ac_tr_lib 1
EOF
LIBS="-lsocket $LIBS"
else
echo "$ac_t""no" 1>&6
fi
;;
*-freebsd3.2)
cat >> confdefs.h <<\EOF
#define FREEBSD_32 1
EOF
;;
*-openbsd*)
opsys=openbsd
cat >> confdefs.h <<\EOF
#define OPEN_BSD 1
EOF
;;
*-bsdi*)
opsys=bsdi
OTHER_METHOD="mtu_kvm.o"
echo $ac_n "checking for main in -lkvm""... $ac_c" 1>&6
echo "configure:2066: checking for main in -lkvm" >&5
ac_lib_var=`echo kvm'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lkvm $LIBS"
cat > conftest.$ac_ext <<EOF
#line 2074 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
if { (eval echo configure:2081: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } &&
test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_lib=HAVE_LIB`echo kvm | sed -e 's/[^a-zA-Z0-9_]/_/g' \
-e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
cat >> confdefs.h <<EOF
#define $ac_tr_lib 1
EOF
LIBS="-lkvm $LIBS"
else
echo "$ac_t""no" 1>&6
fi
;;
esac
case "${host_cpu}-${host_os}" in
i?86-solaris*)
cat >> confdefs.h <<\EOF
#define SOLARIS_X86 1
EOF
;;
esac
case "${enable_vtysh}" in
"yes") VTYSH="vtysh";
cat >> confdefs.h <<\EOF
#define VTYSH 1
EOF
echo $ac_n "checking for tputs in -ltinfo""... $ac_c" 1>&6
echo "configure:2127: checking for tputs in -ltinfo" >&5
ac_lib_var=`echo tinfo'_'tputs | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-ltinfo $LIBS"
cat > conftest.$ac_ext <<EOF
#line 2135 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char tputs();
int main() {
tputs()
; return 0; }
EOF
if { (eval echo configure:2146: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } &&
test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_lib=HAVE_LIB`echo tinfo | sed -e 's/[^a-zA-Z0-9_]/_/g' \
-e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
cat >> confdefs.h <<EOF
#define $ac_tr_lib 1
EOF
LIBS="-ltinfo $LIBS"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for tputs in -lncurses""... $ac_c" 1>&6
echo "configure:2172: checking for tputs in -lncurses" >&5
ac_lib_var=`echo ncurses'_'tputs | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lncurses $LIBS"
cat > conftest.$ac_ext <<EOF
#line 2180 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char tputs();
int main() {
tputs()
; return 0; }
EOF
if { (eval echo configure:2191: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } &&
test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_lib=HAVE_LIB`echo ncurses | sed -e 's/^a-zA-Z0-9_/_/g' \
-e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
cat >> confdefs.h <<EOF
#define $ac_tr_lib 1
EOF
LIBS="-lncurses $LIBS"
else
echo "$ac_t""no" 1>&6
fi
fi
echo $ac_n "checking for main in -lreadline""... $ac_c" 1>&6
echo "configure:2221: checking for main in -lreadline" >&5
ac_lib_var=`echo readline'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lreadline $LIBS"
cat > conftest.$ac_ext <<EOF
#line 2229 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
if { (eval echo configure:2236: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } &&
test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_lib=HAVE_LIB`echo readline | sed -e 's/[^a-zA-Z0-9_]/_/g' \
-e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
cat >> confdefs.h <<EOF
#define $ac_tr_lib 1
EOF
LIBS="-lreadline $LIBS"
else
echo "$ac_t""no" 1>&6
fi
if test $ac_cv_lib_readline_main = no; then
{ echo "configure: error: vtysh needs libreadline but was not found
on your system." 1>&2; exit 1; }
fi
ac_safe=`echo "readline/history.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for readline/history.h""... $ac_c" 1>&6
echo "configure:2268: checking for readline/history.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 2273 "configure"
#include "confdefs.h"
#include <readline/history.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:2278: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
else
echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
:
else
echo "$ac_t""no" 1>&6
fi
if test $ac_cv_header_readline_history_h = no;then
{ echo "configure: error: readline is too old to have
readline/history.h, please update to the latest readline library." 1>&2; exit
1; }
fi
;;
"no" ) VTYSH="";;
* ) ;;
esac
if test "$with_libpam" = "yes"; then
echo $ac_n "checking for pam_start in -lpam""... $ac_c" 1>&6
echo "configure:2309: checking for pam_start in -lpam" >&5
ac_lib_var=`echo pam'_'pam_start | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lpam $LIBS"
cat > conftest.$ac_ext <<EOF
#line 2317 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char pam_start();
int main() {
pam_start()
; return 0; }
EOF
if { (eval echo configure:2328: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } &&
test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for misc_conv in -lpam""... $ac_c" 1>&6
echo "configure:2344: checking for misc_conv in -lpam" >&5
ac_lib_var=`echo pam'_'misc_conv | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lpam $LIBS"
cat > conftest.$ac_ext <<EOF
#line 2352 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char misc_conv();
int main() {
misc_conv()
; return 0; }
EOF
if { (eval echo configure:2363: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } &&
test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
cat >> confdefs.h <<\EOF
#define USE_PAM 1
EOF
LIBPAM="-lpam"
else
echo "$ac_t""no" 1>&6
cat >> confdefs.h <<\EOF
#define USE_PAM 1
EOF
LIBPAM="-lpam -lpam_misc"
fi
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for pam_end in -lpam""... $ac_c" 1>&6
echo "configure:2397: checking for pam_end in -lpam" >&5
ac_lib_var=`echo pam'_'pam_end | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lpam -ldl $LIBS"
cat > conftest.$ac_ext <<EOF
#line 2405 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char pam_end();
int main() {
pam_end()
; return 0; }
EOF
if { (eval echo configure:2416: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } &&
test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for misc_conv in -lpam""... $ac_c" 1>&6
echo "configure:2432: checking for misc_conv in -lpam" >&5
ac_lib_var=`echo pam'_'misc_conv | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lpam $LIBS"
cat > conftest.$ac_ext <<EOF
#line 2440 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char misc_conv();
int main() {
misc_conv()
; return 0; }
EOF
if { (eval echo configure:2451: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } &&
test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
cat >> confdefs.h <<\EOF
#define USE_PAM 1
EOF
LIBPAM="-lpam -ldl"
else
echo "$ac_t""no" 1>&6
cat >> confdefs.h <<\EOF
#define USE_PAM 1
EOF
LIBPAM="-lpam -ldl -lpam_misc"
fi
else
echo "$ac_t""no" 1>&6
echo "configure: warning: *** pam support will not be built ***" 1>&2
fi
fi
fi
echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
echo "configure:2495: checking whether byte ordering is bigendian" >&5
if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_bigendian=unknown
# See if sys/param.h defines the BYTE_ORDER macro.
cat > conftest.$ac_ext <<EOF
#line 2502 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
int main() {
#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN
bogus endian macros
#endif
; return 0; }
EOF
if { (eval echo configure:2513: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5;
}; then
rm -rf conftest*
# It does; now see whether it defined to BIG_ENDIAN or not.
cat > conftest.$ac_ext <<EOF
#line 2517 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
int main() {
#if BYTE_ORDER != BIG_ENDIAN
not big endian
#endif
; return 0; }
EOF
if { (eval echo configure:2528: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5;
}; then
rm -rf conftest*
ac_cv_c_bigendian=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
ac_cv_c_bigendian=no
fi
rm -f conftest*
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
fi
rm -f conftest*
if test $ac_cv_c_bigendian = unknown; then
if test "$cross_compiling" = yes; then
ac_cv_c_bigendian=no
else
cat > conftest.$ac_ext <<EOF
#line 2548 "configure"
#include "confdefs.h"
main () {
/* Are we little or big endian? From Harbison&Steele. */
union
{
long l;
char c[sizeof (long)];
} u;
u.l = 1;
exit (u.c[sizeof (long) - 1] == 1);
}
EOF
if { (eval echo configure:2561: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } &&
test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_bigendian=no
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -fr conftest*
ac_cv_c_bigendian=yes
fi
rm -fr conftest*
fi
fi
fi
echo "$ac_t""$ac_cv_c_bigendian" 1>&6
if test $ac_cv_c_bigendian = yes; then
cat >> confdefs.h <<\EOF
#define WORDS_BIGENDIAN 1
EOF
fi
for ac_func in bcopy bzero strerror inet_aton daemon snprintf vsnprintf strlcat
strlcpy if_nametoindex if_indextoname getifaddrs
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:2589: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 2594 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
int main() {
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif
; return 0; }
EOF
if { (eval echo configure:2617: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } &&
test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz'
'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
else
echo "$ac_t""no" 1>&6
fi
done
for ac_func in setproctitle
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:2644: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 2649 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
int main() {
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif
; return 0; }
EOF
if { (eval echo configure:2672: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } &&
test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz'
'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for setproctitle in -lutil""... $ac_c" 1>&6
echo "configure:2694: checking for setproctitle in -lutil" >&5
ac_lib_var=`echo util'_'setproctitle | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lutil $LIBS"
cat > conftest.$ac_ext <<EOF
#line 2702 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char setproctitle();
int main() {
setproctitle()
; return 0; }
EOF
if { (eval echo configure:2713: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } &&
test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
LIBS="$LIBS -lutil"; cat >> confdefs.h <<\EOF
#define HAVE_SETPROCTITLE 1
EOF
else
echo "$ac_t""no" 1>&6
fi
fi
done
echo $ac_n "checking zebra between kernel interface method""... $ac_c" 1>&6
echo "configure:2741: checking zebra between kernel interface method" >&5
if test x"$opsys" = x"gnu-linux"; then
if test "${enable_netlink}" = "yes";then
echo "$ac_t""netlink" 1>&6
RT_METHOD=rt_netlink.o
cat >> confdefs.h <<\EOF
#define HAVE_NETLINK 1
EOF
netlink=yes
elif test "${enable_netlink}" = "no"; then
echo "$ac_t""ioctl" 1>&6
RT_METHOD=rt_ioctl.o
netlink=no
else
cat > conftest.$ac_ext <<EOF
#line 2757 "configure"
#include "confdefs.h"
#include <linux/autoconf.h>
#include <linux/version.h>
#if LINUX_VERSION_CODE > 131328 /* 2.1.0 or later */
#ifdef CONFIG_RTNETLINK
yes
#endif
#endif
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
egrep "yes" >/dev/null 2>&1; then
rm -rf conftest*
echo "$ac_t""netlink" 1>&6
RT_METHOD=rt_netlink.o
cat >> confdefs.h <<\EOF
#define HAVE_NETLINK 1
EOF
netlink=yes
else
rm -rf conftest*
echo "$ac_t""ioctl" 1>&6
RT_METHOD=rt_ioctl.o
fi
rm -f conftest*
fi
else
if test "$opsys" = "sol2-6";then
echo "$ac_t""solaris" 1>&6
KERNEL_METHOD="kernel_socket.o"
RT_METHOD="rt_socket.o"
else
if test "$cross_compiling" = yes; then
KERNEL_METHOD=kernel_socket.o
RT_METHOD=rt_socket.o
echo "$ac_t""socket" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 2798 "configure"
#include "confdefs.h"
#include <errno.h>
#include <sys/types.h>
#include <sys/socket.h>
main ()
{
int ac_sock;
ac_sock = socket (AF_ROUTE, SOCK_RAW, 0);
if (ac_sock < 0 && errno == EINVAL)
exit (1);
exit (0);
}
EOF
if { (eval echo configure:2814: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } &&
test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
cat >> confdefs.h <<\EOF
#define HAVE_AF_ROUTE 1
EOF
KERNEL_METHOD=kernel_socket.o
RT_METHOD=rt_socket.o
echo "$ac_t""socket" 1>&6
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -fr conftest*
RT_METHOD=rt_ioctl.o
echo "$ac_t""ioctl" 1>&6
fi
rm -fr conftest*
fi
fi
fi
echo $ac_n "checking route read method check""... $ac_c" 1>&6
echo "configure:2840: checking route read method check" >&5
if eval "test \"`echo '$''{'zebra_rtread'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$netlink" = yes; then
RTREAD_METHOD="rtread_netlink.o"
zebra_rtread="netlink"
else
for zebra_rtread in /proc/net/route /dev/ip /dev/null;
do
test x`ls $zebra_rtread 2>/dev/null` = x"$zebra_rtread" && break
done
case $zebra_rtread in
"/proc/net/route") RTREAD_METHOD="rtread_proc.o"
zebra_rtread="proc";;
"/dev/ip") RTREAD_METHOD="rtread_getmsg.o"
zebra_rtread="getmsg";;
*) RTREAD_METHOD="rtread_sysctl.o"
zebra_rtread="sysctl";;
esac
fi
fi
echo "$ac_t""$zebra_rtread" 1>&6
echo $ac_n "checking interface looking up method""... $ac_c" 1>&6
echo "configure:2867: checking interface looking up method" >&5
if test "$netlink" = yes; then
echo "$ac_t""netlink" 1>&6
IF_METHOD=if_netlink.o
else
if test "$opsys" = "sol2-6";then
echo "$ac_t""solaris" 1>&6
IF_METHOD=if_ioctl.o
elif test "$opsys" = "openbsd";then
echo "$ac_t""openbsd" 1>&6
IF_METHOD=if_ioctl.o
elif grep NET_RT_IFLIST /usr/include/sys/socket.h >/dev/null 2>&1; then
echo "$ac_t""sysctl" 1>&6
IF_METHOD=if_sysctl.o
cat >> confdefs.h <<\EOF
#define HAVE_NET_RT_IFLIST 1
EOF
else
echo "$ac_t""ioctl" 1>&6
IF_METHOD=if_ioctl.o
fi
fi
if test -r /proc/net/dev; then
cat >> confdefs.h <<\EOF
#define HAVE_PROC_NET_DEV 1
EOF
IF_PROC=if_proc.o
fi
if test -r /proc/net/if_inet6; then
cat >> confdefs.h <<\EOF
#define HAVE_PROC_NET_IF_INET6 1
EOF
IF_PROC=if_proc.o
fi
echo $ac_n "checking ipforward method check""... $ac_c" 1>&6
echo "configure:2910: checking ipforward method check" >&5
if eval "test \"`echo '$''{'zebra_ipforward_path'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for zebra_ipforward_path in /proc/net/snmp /dev/ip /dev/null;
do
test x`ls $zebra_ipforward_path 2>/dev/null` = x"$zebra_ipforward_path" &&
break
done
case $zebra_ipforward_path in
"/proc/net/snmp") IPFORWARD=ipforward_proc.o
zebra_ipforward_path="proc";;
"/dev/ip")
case "$host" in
*-nec-sysv4*) IPFORWARD=ipforward_ews.o
zebra_ipforward_path="ews";;
*) IPFORWARD=ipforward_solaris.o
zebra_ipforward_path="solaris";;
esac;;
*) IPFORWARD=ipforward_sysctl.o
zebra_ipforward_path="sysctl";;
esac
fi
echo "$ac_t""$zebra_ipforward_path" 1>&6
for ac_func in getaddrinfo
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
echo "configure:2939: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 2944 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
int main() {
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif
; return 0; }
EOF
if { (eval echo configure:2967: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } &&
test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz'
'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
have_getaddrinfo=yes
else
echo "$ac_t""no" 1>&6
have_getaddrinfo=no
fi
done
echo $ac_n "checking whether does this OS have IPv6 stack""... $ac_c" 1>&6
echo "configure:2994: checking whether does this OS have IPv6 stack" >&5
if test "${enable_ipv6}" = "no"; then
echo "$ac_t""disabled" 1>&6
else
if grep IPV6_INRIA_VERSION /usr/include/netinet/in.h >/dev/null 2>&1; then
zebra_cv_ipv6=yes
cat >> confdefs.h <<\EOF
#define HAVE_IPV6 1
EOF
cat >> confdefs.h <<\EOF
#define INRIA_IPV6 1
EOF
RIPNGD="ripngd"
OSPF6D="ospf6d"
LIB_IPV6=""
echo "$ac_t""INRIA IPv6" 1>&6
fi
if grep WIDE /usr/include/netinet6/in6.h >/dev/null 2>&1; then
zebra_cv_ipv6=yes
cat >> confdefs.h <<\EOF
#define HAVE_IPV6 1
EOF
cat >> confdefs.h <<\EOF
#define KAME 1
EOF
RIPNGD="ripngd"
OSPF6D="ospf6d"
if test -d /usr/local/v6/lib -a -f /usr/local/v6/lib/libinet6.a; then
LIB_IPV6="-L/usr/local/v6/lib -linet6"
fi
echo "$ac_t""KAME" 1>&6
fi
if grep NRL /usr/include/netinet6/in6.h >/dev/null 2>&1; then
zebra_cv_ipv6=yes
cat >> confdefs.h <<\EOF
#define HAVE_IPV6 1
EOF
cat >> confdefs.h <<\EOF
#define NRL 1
EOF
RIPNGD="ripngd"
OSPF6D="ospf6d"
if test x"$opsys" = x"bsdi";then
cat >> confdefs.h <<\EOF
#define BSDI_NRL 1
EOF
echo "$ac_t""BSDI_NRL" 1>&6
else
echo "$ac_t""NRL" 1>&6
fi
fi
if test "${enable_ipv6}" = "yes"; then
cat > conftest.$ac_ext <<EOF
#line 3055 "configure"
#include "confdefs.h"
dnl
#include <linux/version.h>
/* 2.1.128 or later */
#if LINUX_VERSION_CODE >= 0x020180
yes
#endif
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
egrep "yes" >/dev/null 2>&1; then
rm -rf conftest*
zebra_cv_ipv6=yes; zebra_cv_linux_ipv6=yes;echo "$ac_t""Linux IPv6" 1>&6
fi
rm -f conftest*
else
if test x`ls /proc/net/ipv6_route 2>/dev/null` = x"/proc/net/ipv6_route"
then
zebra_cv_ipv6=yes
zebra_cv_linux_ipv6=yes
echo "$ac_t""Linux IPv6" 1>&6
fi
fi
if test "$zebra_cv_linux_ipv6" = "yes";then
cat >> confdefs.h <<\EOF
#define HAVE_IPV6 1
EOF
echo $ac_n "checking for GNU libc 2.1""... $ac_c" 1>&6
echo "configure:3086: checking for GNU libc 2.1" >&5
cat > conftest.$ac_ext <<EOF
#line 3088 "configure"
#include "confdefs.h"
#include <features.h>
#if __GLIBC__ >= 2 && __GLIBC_MINOR__ >= 1
yes
#endif
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
egrep "yes" >/dev/null 2>&1; then
rm -rf conftest*
glibc=yes; echo "$ac_t""yes" 1>&6
else
rm -rf conftest*
echo "$ac_t""no" 1>&6
fi
rm -f conftest*
cat >> confdefs.h <<\EOF
#define LINUX_IPV6 1
EOF
RIPNGD="ripngd"
OSPF6D="ospf6d"
if test "$glibc" != "yes"; then
INCLUDES="-I/usr/inet6/include"
if test x`ls /usr/inet6/lib/libinet6.a 2>/dev/null` != x;then
LIB_IPV6="-L/usr/inet6/lib -linet6"
fi
fi
fi
LIBS="$LIB_IPV6 $LIBS"
if test x"$RIPNGD" = x""; then
echo "$ac_t""IPv4 only" 1>&6
fi
fi
if test "${enable_zebra}" = "no";then
ZEBRA=""
else
ZEBRA="zebra"
fi
if test "${enable_bgpd}" = "no";then
BGPD=""
else
BGPD="bgpd"
fi
if test "${enable_ripd}" = "no";then
RIPD=""
else
RIPD="ripd"
fi
if test "${enable_ospfd}" = "no";then
OSPFD=""
else
OSPFD="ospfd"
fi
case "${enable_ripngd}" in
"yes") RIPNGD="ripngd";;
"no" ) RIPNGD="";;
* ) ;;
esac
case "${enable_ospf6d}" in
"yes") OSPF6D="ospf6d";;
"no" ) OSPF6D="";;
* ) ;;
esac
if test "${enable_bgp_announce}" = "no";then
cat >> confdefs.h <<\EOF
#define DISABLE_BGP_ANNOUNCE 1
EOF
fi
echo $ac_n "checking for inet_ntop in -lc""... $ac_c" 1>&6
echo "configure:3181: checking for inet_ntop in -lc" >&5
ac_lib_var=`echo c'_'inet_ntop | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lc $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3189 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char inet_ntop();
int main() {
inet_ntop()
; return 0; }
EOF
if { (eval echo configure:3200: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } &&
test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
cat >> confdefs.h <<\EOF
#define HAVE_INET_NTOP 1
EOF
else
echo "$ac_t""no" 1>&6
fi
echo $ac_n "checking for inet_pton in -lc""... $ac_c" 1>&6
echo "configure:3224: checking for inet_pton in -lc" >&5
ac_lib_var=`echo c'_'inet_pton | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lc $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3232 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char inet_pton();
int main() {
inet_pton()
; return 0; }
EOF
if { (eval echo configure:3243: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } &&
test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
cat >> confdefs.h <<\EOF
#define HAVE_INET_PTON 1
EOF
else
echo "$ac_t""no" 1>&6
fi
echo $ac_n "checking for crypt in -lcrypt""... $ac_c" 1>&6
echo "configure:3267: checking for crypt in -lcrypt" >&5
ac_lib_var=`echo crypt'_'crypt | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lcrypt $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3275 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char crypt();
int main() {
crypt()
; return 0; }
EOF
if { (eval echo configure:3286: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } &&
test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_lib=HAVE_LIB`echo crypt | sed -e 's/[^a-zA-Z0-9_]/_/g' \
-e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
cat >> confdefs.h <<EOF
#define $ac_tr_lib 1
EOF
LIBS="-lcrypt $LIBS"
else
echo "$ac_t""no" 1>&6
fi
echo $ac_n "checking for res_init in -lresolv""... $ac_c" 1>&6
echo "configure:3314: checking for res_init in -lresolv" >&5
ac_lib_var=`echo resolv'_'res_init | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lresolv $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3322 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char res_init();
int main() {
res_init()
; return 0; }
EOF
if { (eval echo configure:3333: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } &&
test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_lib=HAVE_LIB`echo resolv | sed -e 's/[^a-zA-Z0-9_]/_/g' \
-e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
cat >> confdefs.h <<EOF
#define $ac_tr_lib 1
EOF
LIBS="-lresolv $LIBS"
else
echo "$ac_t""no" 1>&6
fi
echo $ac_n "checking for main in -lm""... $ac_c" 1>&6
echo "configure:3361: checking for main in -lm" >&5
ac_lib_var=`echo m'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lm $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3369 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
if { (eval echo configure:3376: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } &&
test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_lib=HAVE_LIB`echo m | sed -e 's/[^a-zA-Z0-9_]/_/g' \
-e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
cat >> confdefs.h <<EOF
#define $ac_tr_lib 1
EOF
LIBS="-lm $LIBS"
else
echo "$ac_t""no" 1>&6
fi
echo $ac_n "checking for __inet_ntop""... $ac_c" 1>&6
echo "configure:3405: checking for __inet_ntop" >&5
if eval "test \"`echo '$''{'ac_cv_func___inet_ntop'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 3410 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char __inet_ntop(); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char __inet_ntop();
int main() {
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub___inet_ntop) || defined (__stub_____inet_ntop)
choke me
#else
__inet_ntop();
#endif
; return 0; }
EOF
if { (eval echo configure:3433: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } &&
test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func___inet_ntop=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_func___inet_ntop=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_func_'__inet_ntop`\" = yes"; then
echo "$ac_t""yes" 1>&6
cat >> confdefs.h <<\EOF
#define HAVE_INET_NTOP 1
EOF
else
echo "$ac_t""no" 1>&6
fi
echo $ac_n "checking for __inet_pton""... $ac_c" 1>&6
echo "configure:3456: checking for __inet_pton" >&5
if eval "test \"`echo '$''{'ac_cv_func___inet_pton'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 3461 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char __inet_pton(); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char __inet_pton();
int main() {
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub___inet_pton) || defined (__stub_____inet_pton)
choke me
#else
__inet_pton();
#endif
; return 0; }
EOF
if { (eval echo configure:3484: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } &&
test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func___inet_pton=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_func___inet_pton=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_func_'__inet_pton`\" = yes"; then
echo "$ac_t""yes" 1>&6
cat >> confdefs.h <<\EOF
#define HAVE_INET_PTON 1
EOF
else
echo "$ac_t""no" 1>&6
fi
echo $ac_n "checking for __inet_aton""... $ac_c" 1>&6
echo "configure:3507: checking for __inet_aton" >&5
if eval "test \"`echo '$''{'ac_cv_func___inet_aton'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 3512 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char __inet_aton(); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char __inet_aton();
int main() {
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub___inet_aton) || defined (__stub_____inet_aton)
choke me
#else
__inet_aton();
#endif
; return 0; }
EOF
if { (eval echo configure:3535: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } &&
test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func___inet_aton=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_func___inet_aton=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_func_'__inet_aton`\" = yes"; then
echo "$ac_t""yes" 1>&6
cat >> confdefs.h <<\EOF
#define HAVE_INET_ATON 1
EOF
else
echo "$ac_t""no" 1>&6
fi
echo $ac_n "checking for regexec in -lc""... $ac_c" 1>&6
echo "configure:3559: checking for regexec in -lc" >&5
ac_lib_var=`echo c'_'regexec | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lc $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3567 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char regexec();
int main() {
regexec()
; return 0; }
EOF
if { (eval echo configure:3578: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } &&
test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
cat >> confdefs.h <<\EOF
#define HAVE_GNU_REGEX 1
EOF
LIB_REGEX=""
else
echo "$ac_t""no" 1>&6
LIB_REGEX="regex.o"
fi
if test "${enable_snmp}" = "yes";then
old_libs="${LIBS}"
LIBS="-L/usr/local/lib"
unset ac_cv_lib_snmp_asn_parse_int
echo $ac_n "checking for asn_parse_int in -lsnmp""... $ac_c" 1>&6
echo "configure:3611: checking for asn_parse_int in -lsnmp" >&5
ac_lib_var=`echo snmp'_'asn_parse_int | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lsnmp $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3619 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char asn_parse_int();
int main() {
asn_parse_int()
; return 0; }
EOF
if { (eval echo configure:3630: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } &&
test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
HAVE_SNMP=yes
else
echo "$ac_t""no" 1>&6
fi
if test "${HAVE_SNMP}" = ""; then
unset ac_cv_lib_snmp_asn_parse_int
echo $ac_n "checking for main in -lcrypto""... $ac_c" 1>&6
echo "configure:3653: checking for main in -lcrypto" >&5
ac_lib_var=`echo crypto'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lcrypto $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3661 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
if { (eval echo configure:3668: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } &&
test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
NEED_CRYPTO=yes
else
echo "$ac_t""no" 1>&6
fi
if test "${NEED_CRYPTO}" = ""; then
echo $ac_n "checking for asn_parse_int in -lsnmp""... $ac_c"
1>&6
echo "configure:3690: checking for asn_parse_int in -lsnmp" >&5
ac_lib_var=`echo snmp'_'asn_parse_int | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lsnmp $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3698 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char asn_parse_int();
int main() {
asn_parse_int()
; return 0; }
EOF
if { (eval echo configure:3709: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } &&
test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
HAVE_SNMP=yes; NEED_CRYPTO=yes
else
echo "$ac_t""no" 1>&6
fi
else
echo $ac_n "checking for asn_parse_int in -lsnmp""... $ac_c" 1>&6
echo "configure:3731: checking for asn_parse_int in -lsnmp" >&5
ac_lib_var=`echo snmp'_'asn_parse_int | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lsnmp "-lcrypto" $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3739 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char asn_parse_int();
int main() {
asn_parse_int()
; return 0; }
EOF
if { (eval echo configure:3750: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } &&
test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
HAVE_SNMP=yes; NEED_CRYPTO=yes;LIBS="$LIBS -lcrypto"
else
echo "$ac_t""no" 1>&6
fi
fi
fi
LIBS="${old_libs}"
if test "${HAVE_SNMP}" = ""; then
old_libs="${LIBS}"
LIBS="-L/usr/local/lib"
echo $ac_n "checking for asn_parse_int in -lsnmp""... $ac_c" 1>&6
echo "configure:3778: checking for asn_parse_int in -lsnmp" >&5
ac_lib_var=`echo snmp'_'asn_parse_int | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lsnmp $LIBS"
cat > conftest.$ac_ext <<EOF
#line 3786 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char asn_parse_int();
int main() {
asn_parse_int()
; return 0; }
EOF
if { (eval echo configure:3797: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } &&
test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
HAVE_SNMP=yes
else
echo "$ac_t""no" 1>&6
fi
LIBS="${old_libs}"
fi
if test "${HAVE_SNMP}" = "yes"; then
for ac_snmp in /usr/include/ucd-snmp/asn1.h
/usr/local/include/ucd-snmp/asn1.h /dev/null
do
test -f "${ac_snmp}" && break
done
case ${ac_snmp} in
/usr/include/ucd-snmp/*)
cat >> confdefs.h <<\EOF
#define HAVE_SNMP 1
EOF
CFLAGS="${CFLAGS} -I/usr/include/ucd-snmp"
LIBS="${LIBS} -lsnmp"
;;
/usr/local/include/ucd-snmp/*)
cat >> confdefs.h <<\EOF
#define HAVE_SNMP 1
EOF
CFLAGS="${CFLAGS} -I/usr/local/include/ucd-snmp"
LIBS="${LIBS} -L/usr/local/lib -lsnmp"
;;
esac
if test "${NEED_CRYPTO}" = "yes"; then
LIBS="${LIBS} -lcrypto"
fi
fi
fi
echo $ac_n "checking whether struct sockaddr has a sa_len field""... $ac_c" 1>&6
echo "configure:3849: checking whether struct sockaddr has a sa_len field" >&5
cat > conftest.$ac_ext <<EOF
#line 3851 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/socket.h>
int main() {
static struct sockaddr ac_i;int ac_j = sizeof (ac_i.sa_len);
; return 0; }
EOF
if { (eval echo configure:3860: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5;
}; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
cat >> confdefs.h <<\EOF
#define HAVE_SA_LEN 1
EOF
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
echo "$ac_t""no" 1>&6
fi
rm -f conftest*
echo $ac_n "checking whether struct sockaddr_in has a sin_len field""... $ac_c"
1>&6
echo "configure:3876: checking whether struct sockaddr_in has a sin_len field"
>&5
cat > conftest.$ac_ext <<EOF
#line 3878 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <netinet/in.h>
int main() {
static struct sockaddr_in ac_i;int ac_j = sizeof (ac_i.sin_len);
; return 0; }
EOF
if { (eval echo configure:3887: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5;
}; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
cat >> confdefs.h <<\EOF
#define HAVE_SIN_LEN 1
EOF
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
echo "$ac_t""no" 1>&6
fi
rm -f conftest*
echo $ac_n "checking whether struct sockaddr_un has a sun_len field""... $ac_c"
1>&6
echo "configure:3903: checking whether struct sockaddr_un has a sun_len field"
>&5
cat > conftest.$ac_ext <<EOF
#line 3905 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/un.h>
int main() {
static struct sockaddr_un ac_i;int ac_j = sizeof (ac_i.sun_len);
; return 0; }
EOF
if { (eval echo configure:3914: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5;
}; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
cat >> confdefs.h <<\EOF
#define HAVE_SUN_LEN 1
EOF
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
echo "$ac_t""no" 1>&6
fi
rm -f conftest*
if test "$zebra_cv_ipv6" = yes; then
echo $ac_n "checking whether struct sockaddr_in6 has a sin6_scope_id
field""... $ac_c" 1>&6
echo "configure:3931: checking whether struct sockaddr_in6 has a sin6_scope_id
field" >&5
cat > conftest.$ac_ext <<EOF
#line 3933 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <netinet/in.h>
int main() {
static struct sockaddr_in6 ac_i;int ac_j = sizeof (ac_i.sin6_scope_id);
; return 0; }
EOF
if { (eval echo configure:3942: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5;
}; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
cat >> confdefs.h <<\EOF
#define HAVE_SIN6_SCOPE_ID 1
EOF
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
echo "$ac_t""no" 1>&6
fi
rm -f conftest*
fi
echo $ac_n "checking whther socklen_t is defined""... $ac_c" 1>&6
echo "configure:3959: checking whther socklen_t is defined" >&5
cat > conftest.$ac_ext <<EOF
#line 3961 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
int main() {
socklen_t ac_x;
; return 0; }
EOF
if { (eval echo configure:3971: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5;
}; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
cat >> confdefs.h <<\EOF
#define HAVE_SOCKLEN_T 1
EOF
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
echo "$ac_t""no" 1>&6
fi
rm -f conftest*
echo $ac_n "checking whether struct sockaddr_dl exist""... $ac_c" 1>&6
echo "configure:3987: checking whether struct sockaddr_dl exist" >&5
cat > conftest.$ac_ext <<EOF
#line 3989 "configure"
#include "confdefs.h"
#include <net/if_dl.h>
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
egrep "sockaddr_dl" >/dev/null 2>&1; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
cat >> confdefs.h <<\EOF
#define HAVE_SOCKADDR_DL 1
EOF
else
rm -rf conftest*
echo "$ac_t""no" 1>&6
fi
rm -f conftest*
echo $ac_n "checking whether struct ifaliasreq exist""... $ac_c" 1>&6
echo "configure:4009: checking whether struct ifaliasreq exist" >&5
cat > conftest.$ac_ext <<EOF
#line 4011 "configure"
#include "confdefs.h"
#include <net/if.h>
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
egrep "ifaliasreq" >/dev/null 2>&1; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
cat >> confdefs.h <<\EOF
#define HAVE_IFALIASREQ 1
EOF
else
rm -rf conftest*
echo "$ac_t""no" 1>&6
fi
rm -f conftest*
echo $ac_n "checking whether struct if6_aliasreq exist""... $ac_c" 1>&6
echo "configure:4031: checking whether struct if6_aliasreq exist" >&5
cat > conftest.$ac_ext <<EOF
#line 4033 "configure"
#include "confdefs.h"
#include <netinet6/in6_var.h>
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
egrep "in6_aliasreq" >/dev/null 2>&1; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
cat >> confdefs.h <<\EOF
#define HAVE_IN6_ALIASREQ 1
EOF
else
rm -rf conftest*
echo "$ac_t""no" 1>&6
fi
rm -f conftest*
echo $ac_n "checking whether struct rt_addrinfo exist""... $ac_c" 1>&6
echo "configure:4053: checking whether struct rt_addrinfo exist" >&5
cat > conftest.$ac_ext <<EOF
#line 4055 "configure"
#include "confdefs.h"
#include <net/route.h>
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
egrep "rt_addrinfo" >/dev/null 2>&1; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
cat >> confdefs.h <<\EOF
#define HAVE_RT_ADDRINFO 1
EOF
else
rm -rf conftest*
echo "$ac_t""no" 1>&6
fi
rm -f conftest*
echo $ac_n "checking whether struct in_pktinfo exist""... $ac_c" 1>&6
echo "configure:4075: checking whether struct in_pktinfo exist" >&5
cat > conftest.$ac_ext <<EOF
#line 4077 "configure"
#include "confdefs.h"
#include <netinet/in.h>
int main() {
struct in_pktinfo ac_x;
; return 0; }
EOF
if { (eval echo configure:4085: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5;
}; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
cat >> confdefs.h <<\EOF
#define HAVE_INPKTINFO 1
EOF
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
echo "$ac_t""no" 1>&6
fi
rm -f conftest*
file="${srcdir}/lib/version.h"
VERSION=`sed -ne 's/^#.*ZEBRA_VERSION.*\"\([^\"]*\)\"$/\1/p' $file`
echo $ac_n "checking pid file directory""... $ac_c" 1>&6
echo "configure:4105: checking pid file directory" >&5
if eval "test \"`echo '$''{'ac_piddir'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ZEBRA_PID_DIR in /var/run /var/adm
/etc /dev/null;
do
test -d $ZEBRA_PID_DIR && break
done
ac_piddir=$ZEBRA_PID_DIR
if test $ZEBRA_PID_DIR = "/dev/null"; then
echo "PID DIRECTORY NOT FOUND!"
fi
fi
echo "$ac_t""$ac_piddir" 1>&6
cat >> confdefs.h <<EOF
#define PATH_ZEBRA_PID "$ac_piddir/zebra.pid"
EOF
cat >> confdefs.h <<EOF
#define PATH_RIPD_PID "$ac_piddir/ripd.pid"
EOF
cat >> confdefs.h <<EOF
#define PATH_RIPNGD_PID "$ac_piddir/ripngd.pid"
EOF
cat >> confdefs.h <<EOF
#define PATH_BGPD_PID "$ac_piddir/bgpd.pid"
EOF
cat >> confdefs.h <<EOF
#define PATH_OSPFD_PID "$ac_piddir/ospfd.pid"
EOF
cat >> confdefs.h <<EOF
#define PATH_OSPF6D_PID "$ac_piddir/ospf6d.pid"
EOF
echo $ac_n "checking for working htonl""... $ac_c" 1>&6
echo "configure:4147: checking for working htonl" >&5
if eval "test \"`echo '$''{'ac_cv_htonl_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 4153 "configure"
#include "confdefs.h"
#ifdef HAVE_SYS_TYPES_H
#include <sys/types.h>
#endif
#ifdef HAVE_NETDB_H
#include <netdb.h>
#endif
#ifdef HAVE_NETINET_IN_H
#include <netinet/in.h>
#endif
int main() {
htonl (0);
; return 0; }
EOF
if { (eval echo configure:4168: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } &&
test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_htonl_works=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
ac_cv_htonl_works=no
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_htonl_works" 1>&6
trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs. It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already. You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
case `(ac_space=' '; set | grep ac_space) 2>&1` in
*ac_space=\ *)
# `set' does not quote correctly, so add quotes (double-quote substitution
# turns \\\\ into \\, and sed turns \\ into \).
sed -n \
-e "s/'/'\\\\''/g" \
-e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
;;
*)
# `set' quotes correctly as required by POSIX, so do not add quotes.
sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
;;
esac >> confcache
if cmp -s $cache_file confcache; then
:
else
if test -w $cache_file; then
echo "updating cache $cache_file"
cat confcache > $cache_file
else
echo "not updating unwritable cache $cache_file"
fi
fi
rm -f confcache
trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1
2 15
test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
# Any assignment to VPATH causes Sun make to only execute
# the first set of double-colon rules, so remove it if not needed.
# If there is a colon in the path, we need to keep it.
if test "x$srcdir" = x.; then
ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d'
fi
trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
DEFS=-DHAVE_CONFIG_H
# Without the "./", some shells look in PATH for config.status.
: ${CONFIG_STATUS=./config.status}
echo creating $CONFIG_STATUS
rm -f $CONFIG_STATUS
cat > $CONFIG_STATUS <<EOF
#! /bin/sh
# Generated automatically by configure.
# Run this file to recreate the current configuration.
# This directory was configured as follows,
# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
#
# $0 $ac_configure_args
#
# Compiler output produced by configure, useful for debugging
# configure, is in ./config.log if it exists.
ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
for ac_option
do
case "\$ac_option" in
-recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create
--no-recursion"
exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create
--no-recursion ;;
-version | --version | --versio | --versi | --vers | --ver | --ve | --v)
echo "$CONFIG_STATUS generated by autoconf version 2.13"
exit 0 ;;
-help | --help | --hel | --he | --h)
echo "\$ac_cs_usage"; exit 0 ;;
*) echo "\$ac_cs_usage"; exit 1 ;;
esac
done
ac_given_srcdir=$srcdir
ac_given_INSTALL="$INSTALL"
trap 'rm -fr `echo "Makefile lib/Makefile zebra/Makefile ripd/Makefile
ripngd/Makefile bgpd/Makefile ospfd/Makefile ospf6d/Makefile vtysh/Makefile
doc/Makefile config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF
# Protect against being on the right side of a sed subst in config.status.
sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
$ac_vpsub
$extrasub
address@hidden@%$SHELL%g
address@hidden@%$CFLAGS%g
address@hidden@%$CPPFLAGS%g
address@hidden@%$CXXFLAGS%g
address@hidden@%$FFLAGS%g
address@hidden@%$DEFS%g
address@hidden@%$LDFLAGS%g
address@hidden@%$LIBS%g
address@hidden@%$exec_prefix%g
address@hidden@%$prefix%g
address@hidden@%$program_transform_name%g
address@hidden@%$bindir%g
address@hidden@%$sbindir%g
address@hidden@%$libexecdir%g
address@hidden@%$datadir%g
address@hidden@%$sysconfdir%g
address@hidden@%$sharedstatedir%g
address@hidden@%$localstatedir%g
address@hidden@%$libdir%g
address@hidden@%$includedir%g
address@hidden@%$oldincludedir%g
address@hidden@%$infodir%g
address@hidden@%$mandir%g
address@hidden@%$INSTALL_PROGRAM%g
address@hidden@%$INSTALL_SCRIPT%g
address@hidden@%$INSTALL_DATA%g
address@hidden@%$PACKAGE%g
address@hidden@%$VERSION%g
address@hidden@%$ACLOCAL%g
address@hidden@%$AUTOCONF%g
address@hidden@%$AUTOMAKE%g
address@hidden@%$AUTOHEADER%g
address@hidden@%$MAKEINFO%g
address@hidden@%$SET_MAKE%g
address@hidden@%$host%g
address@hidden@%$host_alias%g
address@hidden@%$host_cpu%g
address@hidden@%$host_vendor%g
address@hidden@%$host_os%g
address@hidden@%$CC%g
address@hidden@%$CPP%g
address@hidden@%$build%g
address@hidden@%$build_alias%g
address@hidden@%$build_cpu%g
address@hidden@%$build_vendor%g
address@hidden@%$build_os%g
address@hidden@%$AR%g
address@hidden@%$RANLIB%g
address@hidden@%$MULTIPATH_NUM%g
address@hidden@%$LIBPAM%g
address@hidden@%$RT_METHOD%g
address@hidden@%$KERNEL_METHOD%g
address@hidden@%$OTHER_METHOD%g
address@hidden@%$RTREAD_METHOD%g
address@hidden@%$IF_METHOD%g
address@hidden@%$IF_PROC%g
address@hidden@%$IPFORWARD%g
address@hidden@%$LIB_IPV6%g
address@hidden@%$ZEBRA%g
address@hidden@%$BGPD%g
address@hidden@%$RIPD%g
address@hidden@%$RIPNGD%g
address@hidden@%$OSPFD%g
address@hidden@%$OSPF6D%g
address@hidden@%$VTYSH%g
address@hidden@%$INCLUDES%g
address@hidden@%$CURSES%g
address@hidden@%$LIB_REGEX%g
CEOF
EOF
cat >> $CONFIG_STATUS <<\EOF
# Split the substitutions into bite-sized pieces for seds with
# small command number limits, like on Digital OSF/1 and HP-UX.
ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
ac_file=1 # Number of current file.
ac_beg=1 # First line for current file.
ac_end=$ac_max_sed_cmds # Line after last line for current file.
ac_more_lines=:
ac_sed_cmds=""
while $ac_more_lines; do
if test $ac_beg -gt 1; then
sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
else
sed "${ac_end}q" conftest.subs > conftest.s$ac_file
fi
if test ! -s conftest.s$ac_file; then
ac_more_lines=false
rm -f conftest.s$ac_file
else
if test -z "$ac_sed_cmds"; then
ac_sed_cmds="sed -f conftest.s$ac_file"
else
ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
fi
ac_file=`expr $ac_file + 1`
ac_beg=$ac_end
ac_end=`expr $ac_end + $ac_max_sed_cmds`
fi
done
if test -z "$ac_sed_cmds"; then
ac_sed_cmds=cat
fi
EOF
cat >> $CONFIG_STATUS <<EOF
CONFIG_FILES=\${CONFIG_FILES-"Makefile lib/Makefile zebra/Makefile
ripd/Makefile ripngd/Makefile bgpd/Makefile ospfd/Makefile ospf6d/Makefile
vtysh/Makefile doc/Makefile"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
# Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
case "$ac_file" in
*:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
# Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
# Remove last slash and all that follows it. Not all systems have dirname.
ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
# The file is in a subdirectory.
test ! -d "$ac_dir" && mkdir "$ac_dir"
ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
# A "../" for each directory in $ac_dir_suffix.
ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
else
ac_dir_suffix= ac_dots=
fi
case "$ac_given_srcdir" in
.) srcdir=.
if test -z "$ac_dots"; then top_srcdir=.
else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
/*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
*) # Relative path.
srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
top_srcdir="$ac_dots$ac_given_srcdir" ;;
esac
case "$ac_given_INSTALL" in
[/$]*) INSTALL="$ac_given_INSTALL" ;;
*) INSTALL="$ac_dots$ac_given_INSTALL" ;;
esac
echo creating "$ac_file"
rm -f "$ac_file"
configure_input="Generated automatically from `echo $ac_file_in|sed
's%.*/%%'` by configure."
case "$ac_file" in
*Makefile*) ac_comsub="1i\\
# $configure_input" ;;
*) ac_comsub= ;;
esac
ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:%
$ac_given_srcdir/%g"`
sed -e "$ac_comsub
address@hidden@%$configure_input%g
address@hidden@%$srcdir%g
address@hidden@%$top_srcdir%g
address@hidden@%$INSTALL%g
" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
fi; done
rm -f conftest.s*
# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
# NAME is the cpp macro being defined and VALUE is the value it is being given.
#
# ac_d sets the value in "#define NAME VALUE" lines.
ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)'
ac_dB='\([ ][ ]*\)[^ ]*%\1#\2'
ac_dC='\3'
ac_dD='%g'
# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
ac_uB='\([ ]\)%\1#\2define\3'
ac_uC=' '
ac_uD='\4%g'
# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
ac_eB='$%\1#\2define\3'
ac_eC=' '
ac_eD='%g'
if test "${CONFIG_HEADERS+set}" != set; then
EOF
cat >> $CONFIG_STATUS <<EOF
CONFIG_HEADERS="config.h"
EOF
cat >> $CONFIG_STATUS <<\EOF
fi
for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
# Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
case "$ac_file" in
*:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
echo creating $ac_file
rm -f conftest.frag conftest.in conftest.out
ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:%
$ac_given_srcdir/%g"`
cat $ac_file_inputs > conftest.in
EOF
# Transform confdefs.h into a sed script conftest.vals that substitutes
# the proper values into config.h.in to produce config.h. And first:
# Protect against being on the right side of a sed subst in config.status.
# Protect against being in an unquoted here document in config.status.
rm -f conftest.vals
cat > conftest.hdr <<\EOF
s/[\\&%]/\\&/g
s%[\\$`]%\\&%g
s%#define \([A-Za-z_][A-Za-z0-9_]*\)
*\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
s%ac_d%ac_u%gp
s%ac_u%ac_e%gp
EOF
sed -n -f conftest.hdr confdefs.h > conftest.vals
rm -f conftest.hdr
# This sed command replaces #undef with comments. This is necessary, for
# example, in the case of _POSIX_SOURCE, which is predefined and required
# on some systems where configure will not decide to define it.
cat >> conftest.vals <<\EOF
s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
EOF
# Break up conftest.vals because some shells have a limit on
# the size of here documents, and old seds have small limits too.
rm -f conftest.tail
while :
do
ac_lines=`grep -c . conftest.vals`
# grep -c gives empty output for an empty file on some AIX systems.
if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
# Write a limited-size here document to conftest.frag.
echo ' cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
echo 'CEOF
sed -f conftest.frag conftest.in > conftest.out
rm -f conftest.in
mv conftest.out conftest.in
' >> $CONFIG_STATUS
sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
rm -f conftest.vals
mv conftest.tail conftest.vals
done
rm -f conftest.vals
cat >> $CONFIG_STATUS <<\EOF
rm -f conftest.frag conftest.h
echo "/* $ac_file. Generated automatically by configure. */" > conftest.h
cat conftest.in >> conftest.h
rm -f conftest.in
if cmp -s $ac_file conftest.h 2>/dev/null; then
echo "$ac_file is unchanged"
rm -f conftest.h
else
# Remove last slash and all that follows it. Not all systems have dirname.
ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
# The file is in a subdirectory.
test ! -d "$ac_dir" && mkdir "$ac_dir"
fi
rm -f $ac_file
mv conftest.h $ac_file
fi
fi; done
EOF
cat >> $CONFIG_STATUS <<EOF
EOF
cat >> $CONFIG_STATUS <<\EOF
test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h
exit 0
EOF
chmod +x $CONFIG_STATUS
rm -fr confdefs* $ac_clean_files
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
echo "
zebra configuration
-------------------
zebra version : ${VERSION}
host operationg system : ${host_os}
source code location : ${srcdir}
compiler : ${CC}
compiler flags : ${CFLAGS}
directory for pid files : ${ac_piddir}
"
- Zebra Bug,
Anthony Schirripa <=