[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Simple full duplex communication using Basic Tx a
From: |
Martin Braun |
Subject: |
Re: [Discuss-gnuradio] Simple full duplex communication using Basic Tx and TVRX board |
Date: |
Wed, 18 Feb 2009 16:03:42 +0100 |
User-agent: |
Mutt/1.5.17 (2007-11-01) |
On Wed, Feb 18, 2009 at 06:14:54PM +0530, Narayanan, Sivaramasubramanian (R&T)
wrote:
> I generate a sine wave(3500 Hz) and transmit using Basix Tx at 100MHz.
>
> I also want to tune the TVRX board to 100MHz and receive the same signal and
> plot it on the scope in the GUI.
What exactly did you see? Did you try an FFT visualisation with
appropriate decimation? Your error and debugging procedure description
could be a bit more precise for others to help.
Do you have a spectrum analyser to see what's happening? At 100 MHz,
you could even use a normal FM radio to pick up something (you might
want to use a different test signal, in that case).
MB
--
Dipl.-Ing. Martin Braun Phone: +49-(0)721-608 3790
Institut fuer Nachrichtentechnik Fax: +49-(0)721-608 6071
Universitaet Karlsruhe (TH) http://www.int.uni-karlsruhe.de/
pgpEkL4zJNDxQ.pgp
Description: PGP signature