[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] IEEE 802.11 a/g/p Transceiver module - Making cha
From: |
Bastian Bloessl |
Subject: |
Re: [Discuss-gnuradio] IEEE 802.11 a/g/p Transceiver module - Making changes in WiFi PHY Hier Block |
Date: |
Mon, 20 Mar 2017 21:37:05 +0100 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:45.0) Gecko/20100101 Thunderbird/45.7.0 |
Hi,
On 03/20/2017 09:17 PM, Qurat-Ul-Ann Akbar wrote:
> Hi,
>
> Thank you. I got it! I have another question. In the OFDM Carrier
> Allocator block, there are 127 values for pilot symbols each of them
> either (1,1,1,-1) or (-1,-1,-1,1). The pilot frequencies are
> (-27,-7,7,21) according to IEEE 802.11 standard. But I do not understand
> why are there 127 symbol values. Can you kindly explain that ?
The four values indicate the four pilot symbols (on subcarriers -21, -7,
7, 21). With 802.11, the pilots change polarity based on a predefined
sequence (of length 127). It is in this exact format also in the
standard (Section 18.3.5.10 of the 2012 version).
Best,
Bastian
>
> On Mon, Mar 20, 2017 at 12:09 PM, Bastian Bloessl <address@hidden
> <mailto:address@hidden>> wrote:
>
> Hi,
>
>
> > On 20 Mar 2017, at 17:50, Qurat-Ul-Ann Akbar <address@hidden
> <mailto:address@hidden>> wrote:
> >
> > If I want to make changes in the PHY hierarchical block, can I just
> make changes in the grc file available in the examples folder and then
> recompile ? Because I cant file a .cc file in the lib folder in IEEE_802.11
> module and the source code for most blocks is in there.
> >
>
> I’m afraid I don’t get the question, but if you don’t see any .cc
> files in the lib folder, you might want to clone the repository
> again, because actually there are some
>
> https://github.com/bastibl/gr-ieee802-11/tree/next/lib
> <https://github.com/bastibl/gr-ieee802-11/tree/next/lib>
>
> If you only change the flow graph in GRC, you don’t have to
> recompile the module (i.e., recompile c++ code). Just click on the
> “generate” button (or press F5) this will rebuild the PHY. Then the
> other flow graphs will automatically use the new version of the PHY.
>
> Best,
> Bastian
>
>
- [Discuss-gnuradio] IEEE 802.11 a/g/p Transceiver module - Making changes in WiFi PHY Hier Block, Qurat-Ul-Ann Akbar, 2017/03/20
- [Discuss-gnuradio] IEEE 802.11 a/g/p Transceiver module - Making changes in WiFi PHY Hier Block, Qurat-Ul-Ann Akbar, 2017/03/20
- Re: [Discuss-gnuradio] IEEE 802.11 a/g/p Transceiver module - Making changes in WiFi PHY Hier Block, Bastian Bloessl, 2017/03/20
- Re: [Discuss-gnuradio] IEEE 802.11 a/g/p Transceiver module - Making changes in WiFi PHY Hier Block, Qurat-Ul-Ann Akbar, 2017/03/20
- Re: [Discuss-gnuradio] IEEE 802.11 a/g/p Transceiver module - Making changes in WiFi PHY Hier Block,
Bastian Bloessl <=
- Re: [Discuss-gnuradio] IEEE 802.11 a/g/p Transceiver module - Making changes in WiFi PHY Hier Block, Qurat-Ul-Ann Akbar, 2017/03/24
- Re: [Discuss-gnuradio] IEEE 802.11 a/g/p Transceiver module - Making changes in WiFi PHY Hier Block, Bastian Bloessl, 2017/03/24
- Re: [Discuss-gnuradio] IEEE 802.11 a/g/p Transceiver module - Making changes in WiFi PHY Hier Block, Qurat-Ul-Ann Akbar, 2017/03/25
- Re: [Discuss-gnuradio] IEEE 802.11 a/g/p Transceiver module - Making changes in WiFi PHY Hier Block, Bastian Bloessl, 2017/03/25
- Re: [Discuss-gnuradio] IEEE 802.11 a/g/p Transceiver module - Making changes in WiFi PHY Hier Block, Qurat-Ul-Ann Akbar, 2017/03/25