Re: clear buffers of stuck chain

GNU Radio does not provide a way to flush stream buffers during runtime, if that's what you're asking. If something isn't working, then there's something strange going on in the flowgraph and/or your overall system .. for example sample rate mis-matches can happen when using actual hardware (especially when doing both Tx and Rx in the same flowgraph). If you want to get into some more detail (but not too much) about the issue(s) your seeing, we might be able to provide more specific assistance. - MLD

On Mon, Feb 10, 2020 at 4:11 AM Eitan Hetzroni <address@hidden> wrote:

hi,
the chain is https://github.com/bastibl/gr-ieee802-15-4 used to transmit 802154 over usrp b200mini

On Sun, Feb 9, 2020 at 12:32 PM Müller, Marcus (CEL) <address@hidden> wrote:
Hi Eitan,

sorry, nobody will be able to help you based on the lack of information
on what exactly you're doing. "A zigbee chain" really doesn't help any
of us debug your issue!

Best regards,
Marcus

On Sun, 2020-02-09 at 09:33 +0200, Eitan Hetzroni wrote:
> anyone?
>
> On Wed, Feb 5, 2020 at 5:47 PM Eitan Hetzroni <address@hidden>
> wrote:
> > hi,
> > i am using a gnuradio zigbee chain , and sending alot of packets.
> > after a certain point, it stops sending packets(or does very
> > slowly).
> > can i somehow increase the buffer(message loop) or force it to
> > clear the message loop?
> >
> > thanks
> >
>
> The information transmitted is intended only for the person or entity
> to which it is addressed and may contain confidential and/or
> privileged material. Any review, retransmission, dissemination or
> other use of, or taking of any action in reliance upon, this
> information by persons or entities other than the intended recipient
> is prohibited. If you received this in error, please contact the
> sender and delete all copies of the message.

The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete all copies of the message.

From:	Michael Dickens
Subject:	Re: clear buffers of stuck chain
Date:	Mon, 10 Feb 2020 11:21:05 -0500