[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [GNU Radio 3.8] Error loading modules on E310
From: |
Philip Balister |
Subject: |
Re: [GNU Radio 3.8] Error loading modules on E310 |
Date: |
Thu, 20 Feb 2020 11:05:13 -0500 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101 Thunderbird/68.4.1 |
I had some dist-packages versus site-packages with some versions of
gnuradio. See if both exist. I'm betting numpy is in site-packages.
Philip
On 2/19/20 4:46 PM, Ivan Iudice wrote:
> I’m curious to know if there is somebody in the list developing for E310
> using current SDK.
> This is a problem that, obviously, everybody wants execute custom module
> could incur.
> Any ideas?
>
> Ivan
>
>> Il giorno 17 feb 2020, alle ore 17:31, address@hidden ha scritto:
>>
>>
>> Dear all,
>> finally I cross-compiled my OOT module for running on USRP E310.
>> Based on the instructions at
>> "https://kb.ettus.com/Software_Development_on_the_E3xx_USRP_-_Building_RFNoC_UHD_/_GNU_Radio_/_gr-ettus_from_Source",
>> I set the environment variable PYTHONPATH a little bit different, to point
>> the path of the installed OOT module:
>>
>> export PYTHONPATH=$LOCALPREFIX/lib/python3.5/dist-packages:$PYTHONPATH
>>
>> Such a way, on the target I can load my custom module in python.
>> root@ni-e31x-316AFEA:~# python3 -c "import custom_mod"
>> I created a flowgraph that use my OOT module, and I discovered in the newer
>> file system for E310 python3 has not all of the needed libraries.
>> root@ni-e31x-316AFEA:~# ./top_block.py
>> Traceback (most recent call last):
>> File "./top_block.py", line 12, in <module>
>> from gnuradio import blocks
>> File
>> "/home/root/localinstall/usr/lib/python3.5/dist-packages/gnuradio/blocks/__init__.py",
>> line 38, in <module>
>> from .stream_to_vector_decimator import *
>> File
>> "/home/root/localinstall/usr/lib/python3.5/dist-packages/gnuradio/blocks/stream_to_vector_decimator.py",
>> line 23, in <module>
>> from gnuradio import gr
>> File
>> "/home/root/localinstall/usr/lib/python3.5/dist-packages/gnuradio/gr/__init__.py",
>> line 46, in <module>
>> from .top_block import *
>> File
>> "/home/root/localinstall/usr/lib/python3.5/dist-packages/gnuradio/gr/top_block.py",
>> line 32, in <module>
>> from .hier_block2 import hier_block2
>> File
>> "/home/root/localinstall/usr/lib/python3.5/dist-packages/gnuradio/gr/hier_block2.py",
>> line 26, in <module>
>> import pmt
>> File
>> "/home/root/localinstall/usr/lib/python3.5/dist-packages/pmt/__init__.py",
>> line 61, in <module>
>> from .pmt_to_python import pmt_to_python as to_python
>> File
>> "/home/root/localinstall/usr/lib/python3.5/dist-packages/pmt/pmt_to_python.py",
>> line 23, in <module>
>> import numpy
>> ImportError: No module named 'numpy'
>> How could I solve the problem?
>> I'm so close to run my OOT modules on the target...
>> Thanks so much.
>> Ivan
>>
>>
>>
>> Con Tiscali Mobile Smart 30 4G hai minuti illimitati, 100 SMS e 30 Giga in
>> 4G a soli 8,99€ al mese. http://tisca.li/smart30
>>
>
- [GNU Radio 3.8] Error loading modules on E310, krono86, 2020/02/17
- Re: [GNU Radio 3.8] Error loading modules on E310, Ivan Iudice, 2020/02/19
- Re: [GNU Radio 3.8] Error loading modules on E310,
Philip Balister <=
- Re: [GNU Radio 3.8] Error loading modules on E310, Ivan Iudice, 2020/02/20
- Re: [GNU Radio 3.8] Error loading modules on E310, Philip Balister, 2020/02/20
- Re: [GNU Radio 3.8] Error loading modules on E310, Ivan Iudice, 2020/02/20
- Re: [GNU Radio 3.8] Error loading modules on E310, CEL, 2020/02/20
- Re: [GNU Radio 3.8] Error loading modules on E310, Philip Balister, 2020/02/20
- Re: [GNU Radio 3.8] Error loading modules on E310, Ivan Iudice, 2020/02/21
- Re: [GNU Radio 3.8] Error loading modules on E310, Philip Balister, 2020/02/21
- Re: [GNU Radio 3.8] Error loading modules on E310, Ivan Iudice, 2020/02/21
- Re: [GNU Radio 3.8] Error loading modules on E310, Philip Balister, 2020/02/21
- Re: [GNU Radio 3.8] Error loading modules on E310, Ivan Iudice, 2020/02/21