--- Begin Message ---
|
Subject: |
Suspend-to-disk with LUKS-encrypted root doesn’t work |
|
Date: |
Fri, 07 Apr 2023 14:42:58 +0200 |
|
User-agent: |
Gnus/5.13 (Gnus v5.13) Emacs/28.2 (gnu/linux) |
Hello!
Since my laptop’s battery died, I set up suspend-to-disk as documented
in the manual (info "(guix) Swap Space"). I use a swap file on top of
my LUKS-encrypted root partition, so I added:
"resume=/swap"
"resume_offset=OFFSET"
to my ‘kernel-arguments’ field, where OFFSET is given by ‘filefrag’.
However, when resuming, it looks as though the kernel is not even trying
to resume:
--8<---------------cut here---------------start------------->8---
Apr 7 14:29:47 localhost vmunix: [ 0.000000] Linux version 6.2.9-gnu
(guix@guix) (gcc (GCC) 10.3.0, GNU ld (GNU Binutils) 2.37) #1 SMP
PREEMPT_DYNAMIC 1
Apr 7 14:29:47 localhost vmunix: [ 0.000000] Command line:
BOOT_IMAGE=/gnu/store/6441f00fkyg1r6jpj7f0qpa798svsggv-linux-libre-6.2.9/bzImage
root=root gnu.system=/gnu/store/rsv7gc69ishn0cvd8151083i367zp0v2-system
gnu.load=/gnu/store/rsv7gc69ishn0cvd8151083i367zp0v2-system/boot
modprobe.blacklist=usbmouse,usbkbd,iwlwifi resume=/swap resume_offset=118786729
quiet
Apr 7 14:29:47 localhost vmunix: [ 0.000000] KERNEL supported cpus:
Apr 7 14:29:47 localhost vmunix: [ 0.000000] Intel GenuineIntel
Apr 7 14:29:47 localhost vmunix: [ 0.000000] AMD AuthenticAMD
[...]
Apr 7 14:29:47 localhost vmunix: [ 0.043725] smpboot: Allowing 4 CPUs, 0
hotplug CPUs
Apr 7 14:29:47 localhost vmunix: [ 0.043748] PM: hibernation: Registered
nosave memory: [mem 0x00000000-0x00000fff]
Apr 7 14:29:47 localhost vmunix: [ 0.043750] PM: hibernation: Registered
nosave memory: [mem 0x00058000-0x00058fff]
Apr 7 14:29:47 localhost vmunix: [ 0.043753] PM: hibernation: Registered
nosave memory: [mem 0x0009e000-0x0009efff]
Apr 7 14:29:47 localhost vmunix: [ 0.043755] PM: hibernation: Registered
nosave memory: [mem 0x000a0000-0x000fffff]
Apr 7 14:29:47 localhost vmunix: [ 0.043757] PM: hibernation: Registered
nosave memory: [mem 0xb8a36000-0xb8a3dfff]
Apr 7 14:29:47 localhost vmunix: [ 0.043759] PM: hibernation: Registered
nosave memory: [mem 0xc70fb000-0xc75fafff]
Apr 7 14:29:47 localhost vmunix: [ 0.043760] PM: hibernation: Registered
nosave memory: [mem 0xc75fb000-0xc7c7efff]
Apr 7 14:29:47 localhost vmunix: [ 0.043761] PM: hibernation: Registered
nosave memory: [mem 0xc7c7f000-0xc7e7efff]
Apr 7 14:29:47 localhost vmunix: [ 0.043762] PM: hibernation: Registered
nosave memory: [mem 0xc7e7f000-0xc7efefff]
Apr 7 14:29:47 localhost vmunix: [ 0.043764] PM: hibernation: Registered
nosave memory: [mem 0xc7f00000-0xcc7fffff]
Apr 7 14:29:47 localhost vmunix: [ 0.043765] PM: hibernation: Registered
nosave memory: [mem 0xcc800000-0xf80f9fff]
Apr 7 14:29:47 localhost vmunix: [ 0.043766] PM: hibernation: Registered
nosave memory: [mem 0xf80fa000-0xf80fafff]
Apr 7 14:29:47 localhost vmunix: [ 0.043767] PM: hibernation: Registered
nosave memory: [mem 0xf80fb000-0xf80fcfff]
Apr 7 14:29:47 localhost vmunix: [ 0.043768] PM: hibernation: Registered
nosave memory: [mem 0xf80fd000-0xf80fdfff]
Apr 7 14:29:47 localhost vmunix: [ 0.043768] PM: hibernation: Registered
nosave memory: [mem 0xf80fe000-0xfdffffff]
Apr 7 14:29:47 localhost vmunix: [ 0.043769] PM: hibernation: Registered
nosave memory: [mem 0xfe000000-0xfe010fff]
Apr 7 14:29:47 localhost vmunix: [ 0.043770] PM: hibernation: Registered
nosave memory: [mem 0xfe011000-0xffffffff]
Apr 7 14:29:47 localhost vmunix: [ 0.043772] [mem 0xcc800000-0xf80f9fff]
available for PCI devices
Apr 7 14:29:47 localhost vmunix: [ 0.043773] Booting paravirtualized kernel
on bare hardware
Apr 7 14:29:47 localhost vmunix: [ 0.043775] clocksource: refined-jiffies:
mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
Apr 7 14:29:47 localhost vmunix: [ 0.043785] setup_percpu: NR_CPUS:256
nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
Apr 7 14:29:47 localhost vmunix: [ 0.044150] percpu: Embedded 57 pages/cpu
s194792 r8192 d30488 u524288
Apr 7 14:29:47 localhost vmunix: [ 0.044189] Fallback order for Node 0: 0
Apr 7 14:29:47 localhost vmunix: [ 0.044192] Built 1 zonelists, mobility
grouping on. Total pages: 4098520
Apr 7 14:29:47 localhost vmunix: [ 0.044193] Policy zone: Normal
Apr 7 14:29:47 localhost vmunix: [ 0.044194] Kernel command line:
BOOT_IMAGE=/gnu/store/6441f00fkyg1r6jpj7f0qpa798svsggv-linux-libre-6.2.9/bzImage
root=root gnu.system=/gnu/store/rsv7gc69ishn0cvd8151083i367zp0v2-system
gnu.load=/gnu/store/rsv7gc69ishn0cvd8151083i367zp0v2-system/boot
modprobe.blacklist=usbmouse,usbkbd,iwlwifi resume=/swap resume_offset=118786729
quiet
Apr 7 14:29:47 localhost vmunix: [ 0.044318] Unknown kernel command line
parameters
"BOOT_IMAGE=/gnu/store/6441f00fkyg1r6jpj7f0qpa798svsggv-linux-libre-6.2.9/bzImage",
will be passed to user space.
Apr 7 14:29:47 localhost vmunix: [ 0.044342] random: crng init done
[...]
Apr 7 14:29:47 localhost vmunix: [ 0.946203] sd 2:0:0:0: Attached scsi
generic sg0 type 0
Apr 7 14:29:47 localhost vmunix: [ 0.946436] sd 2:0:0:0: [sda] 1000215216
512-byte logical blocks: (512 GB/477 GiB)
Apr 7 14:29:47 localhost vmunix: [ 0.946447] sd 2:0:0:0: [sda] 4096-byte
physical blocks
Apr 7 14:29:47 localhost vmunix: [ 0.946490] sd 2:0:0:0: [sda] Write
Protect is off
Apr 7 14:29:47 localhost vmunix: [ 0.946722] sd 2:0:0:0: [sda] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Apr 7 14:29:47 localhost vmunix: [ 0.946873] sd 2:0:0:0: [sda] Preferred
minimum I/O size 4096 bytes
Apr 7 14:29:47 localhost vmunix: [ 0.969038] sda: sda1 sda2 sda3
Apr 7 14:29:47 localhost vmunix: [ 0.969435] sd 2:0:0:0: [sda] Attached
SCSI disk
Apr 7 14:29:47 localhost vmunix: [ 0.974847] usbcore: registered new
interface driver usb-storage
[...]
Apr 7 14:29:47 localhost vmunix: [ 2.106128] usb 1-9: Manufacturer: Generic
Apr 7 14:29:47 localhost vmunix: [ 2.106132] usb 1-9: SerialNumber:
200901010001
Apr 7 14:29:47 localhost vmunix: [ 13.073755] EXT4-fs (dm-0): mounted
filesystem d25675c9-c26a-487d-a6e4-0bab06b2474b with ordered data mode. Quota
mode: none.
Apr 7 14:29:47 localhost vmunix: [ 14.350824] shepherd[1]: Starting service
root...
Apr 7 14:29:47 localhost vmunix: [ 14.351331] shepherd[1]: Service root
started.
Apr 7 14:29:47 localhost vmunix: [ 14.351787] shepherd[1]: Service root
running with value #t.
Apr 7 14:29:47 localhost vmunix: [ 14.353268] shepherd[1]: Service root has
been started.
Apr 7 14:29:47 localhost vmunix: [ 14.806435] shepherd[1]: starting
services...
Apr 7 14:29:47 localhost vmunix: [ 14.810401] shepherd[1]: Starting service
user-file-systems...
Apr 7 14:29:47 localhost vmunix: [ 14.813909] shepherd[1]: Starting service
root-file-system...
Apr 7 14:29:47 localhost vmunix: [ 14.814404] shepherd[1]: Starting service
host-name...
Apr 7 14:29:47 localhost vmunix: [ 14.815015] shepherd[1]: Starting service
sysctl...
Apr 7 14:29:47 localhost vmunix: [ 14.815373] shepherd[1]: Starting service
loopback...
--8<---------------cut here---------------end--------------->8---
Hibernation (with ‘echo disk > /sys/power/state’) did seem to succeed,
with this one message:
--8<---------------cut here---------------start------------->8---
Apr 7 12:39:30 localhost vmunix: [14219.893014] PM: hibernation: hibernation
entry
--8<---------------cut here---------------end--------------->8---
Am I missing something?
Thanks,
Ludo’.
--- End Message ---
--- Begin Message ---
|
Subject: |
Re: bug#62711: Suspend-to-disk with LUKS-encrypted root doesn’t work |
|
Date: |
Sun, 21 May 2023 01:19:37 +0200 |
|
User-agent: |
Gnus/5.13 (Gnus v5.13) Emacs/28.2 (gnu/linux) |
Hi,
Ludovic Courtès <ludo@gnu.org> skribis:
> Mekeor Melire <mekeor@posteo.de> skribis:
>
>> (kernel-arguments
>> (cons*
>> "resume=/dev/mapper/cryptroot"
>
> Ooh, got it, that’s the part I got wrong.
>
> Thanks to the two of your for explaining!
>
> How about this change:
I finally pushed a simpler change as commit
7d1d5e16da6f1b37b3e0c16adf44b8e305e1e5bd.
Ludo’.
--- End Message ---