[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Emacs-diffs] Changes to emacs/man/calc.texi
From: |
Jay Belanger |
Subject: |
[Emacs-diffs] Changes to emacs/man/calc.texi |
Date: |
Wed, 25 May 2005 16:55:50 -0400 |
Index: emacs/man/calc.texi
diff -c emacs/man/calc.texi:1.61 emacs/man/calc.texi:1.62
*** emacs/man/calc.texi:1.61 Sat May 21 16:03:42 2005
--- emacs/man/calc.texi Wed May 25 20:55:49 2005
***************
*** 162,167 ****
--- 162,168 ----
* Store and Recall:: Storing and recalling variables.
* Graphics:: Commands for making graphs of data.
* Kill and Yank:: Moving data into and out of Calc.
+ * Keypad Mode:: Operating Calc from a keypad.
* Embedded Mode:: Working with formulas embedded in a file.
* Programming:: Calc as a programmable calculator.
***************
*** 1028,1034 ****
...
--**-Emacs: myfile (Fundamental)----All----------------------
! --- Emacs Calculator Mode --- |Emacs Calc Mode v2.00...
2: 17.3 | 17.3
1: -5 | 3
. | 2
--- 1029,1035 ----
...
--**-Emacs: myfile (Fundamental)----All----------------------
! --- Emacs Calculator Mode --- |Emacs Calc Mode v2.1 ...
2: 17.3 | 17.3
1: -5 | 3
. | 2
***************
*** 1149,1176 ****
\medskip
@end tex
@smallexample
! |--- Emacs Calculator Mode ---
! |2: 17.3
! |1: -5
! | .
! |--%%-Calc: 12 Deg (Calcul
! |----+-----Calc 2.00-----+----1
! |FLR |CEIL|RND |TRNC|CLN2|FLT |
! |----+----+----+----+----+----|
! | LN |EXP | |ABS |IDIV|MOD |
! |----+----+----+----+----+----|
! |SIN |COS |TAN |SQRT|y^x |1/x |
! |----+----+----+----+----+----|
! | ENTER |+/- |EEX |UNDO| <- |
! |-----+---+-+--+--+-+---++----|
! | INV | 7 | 8 | 9 | / |
! |-----+-----+-----+-----+-----|
! | HYP | 4 | 5 | 6 | * |
! |-----+-----+-----+-----+-----|
! |EXEC | 1 | 2 | 3 | - |
! |-----+-----+-----+-----+-----|
! | OFF | 0 | . | PI | + |
! |-----+-----+-----+-----+-----+
@end smallexample
Keypad mode is much easier for beginners to learn, because there
--- 1150,1179 ----
\medskip
@end tex
@smallexample
! @group
! |--- Emacs Calculator Mode ---
! |2: 17.3
! |1: -5
! | .
! |--%%-Calc: 12 Deg (Calcul
! |----+-----Calc 2.1------+----1
! |FLR |CEIL|RND |TRNC|CLN2|FLT |
! |----+----+----+----+----+----|
! | LN |EXP | |ABS |IDIV|MOD |
! |----+----+----+----+----+----|
! |SIN |COS |TAN |SQRT|y^x |1/x |
! |----+----+----+----+----+----|
! | ENTER |+/- |EEX |UNDO| <- |
! |-----+---+-+--+--+-+---++----|
! | INV | 7 | 8 | 9 | / |
! |-----+-----+-----+-----+-----|
! | HYP | 4 | 5 | 6 | * |
! |-----+-----+-----+-----+-----|
! |EXEC | 1 | 2 | 3 | - |
! |-----+-----+-----+-----+-----|
! | OFF | 0 | . | PI | + |
! |-----+-----+-----+-----+-----+
! @end group
@end smallexample
Keypad mode is much easier for beginners to learn, because there
***************
*** 10010,10016 ****
* Numeric Entry::
* Algebraic Entry::
* Quick Calculator::
- * Keypad Mode::
* Prefix Arguments::
* Undo::
* Error Messages::
--- 10013,10018 ----
***************
*** 29649,29655 ****
just by double-clicking on it in the shell, then middle-clicking
in the Calc window.
! @node Keypad Mode, Embedded Mode, Kill and Yank, Introduction
@chapter Keypad Mode
@noindent
--- 29651,29657 ----
just by double-clicking on it in the shell, then middle-clicking
in the Calc window.
! @node Keypad Mode, Embedded Mode, Kill and Yank, Top
@chapter Keypad Mode
@noindent
***************
*** 29706,29712 ****
@smallexample
@group
! |----+-----Calc 2.00-----+----1
|FLR |CEIL|RND |TRNC|CLN2|FLT |
|----+----+----+----+----+----|
| LN |EXP | |ABS |IDIV|MOD |
--- 29708,29714 ----
@smallexample
@group
! |----+-----Calc 2.1------+----1
|FLR |CEIL|RND |TRNC|CLN2|FLT |
|----+----+----+----+----+----|
| LN |EXP | |ABS |IDIV|MOD |
***************
*** 35020,35026 ****
@appendix Calc Summary
@noindent
! This section includes a complete list of Calc 2.02 keystroke commands.
Each line lists the stack entries used by the command (top-of-stack
last), the keystrokes themselves, the prompts asked by the command,
and the result of the command (also with top-of-stack last).
--- 35022,35028 ----
@appendix Calc Summary
@noindent
! This section includes a complete list of Calc 2.1 keystroke commands.
Each line lists the stack entries used by the command (top-of-stack
last), the keystrokes themselves, the prompts asked by the command,
and the result of the command (also with top-of-stack last).
- [Emacs-diffs] Changes to emacs/man/calc.texi, Jay Belanger, 2005/05/08
- [Emacs-diffs] Changes to emacs/man/calc.texi, Jay Belanger, 2005/05/13
- [Emacs-diffs] Changes to emacs/man/calc.texi, Jay Belanger, 2005/05/15
- [Emacs-diffs] Changes to emacs/man/calc.texi, Jay Belanger, 2005/05/16
- [Emacs-diffs] Changes to emacs/man/calc.texi, Jay Belanger, 2005/05/21
- [Emacs-diffs] Changes to emacs/man/calc.texi,
Jay Belanger <=
- [Emacs-diffs] Changes to emacs/man/calc.texi, Jay Belanger, 2005/05/27
- [Emacs-diffs] Changes to emacs/man/calc.texi, Jay Belanger, 2005/05/27
- [Emacs-diffs] Changes to emacs/man/calc.texi, Jay Belanger, 2005/05/28
- [Emacs-diffs] Changes to emacs/man/calc.texi, Jay Belanger, 2005/05/28
- [Emacs-diffs] Changes to emacs/man/calc.texi, Jay Belanger, 2005/05/30
- [Emacs-diffs] Changes to emacs/man/calc.texi, Jay Belanger, 2005/05/31
- [Emacs-diffs] Changes to emacs/man/calc.texi, Jay Belanger, 2005/05/31