[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Bug: Error while exporting o TexInfo. Html export works fine. [9.4.4
From: |
Ramesh Nedunchezian |
Subject: |
Re: Bug: Error while exporting o TexInfo. Html export works fine. [9.4.4 (release_9.4.4 @ /usr/local/share/emacs/28.0.50/lisp/org/)] |
Date: |
Sun, 4 Apr 2021 09:56:13 +0530 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101 Thunderbird/68.5.0 |
On 04/04/21 1:20 am, Nicolas Goaziou wrote:
> Ramesh Nedunchezian <rameshnedunchezian@outlook.com> writes:
>
>> The advantage is you move to an error, fix it, then M-g M-n, fix it
>> and so on and so forth.
>
> But all reports are not errors. You may not want to fix them all either.
> OTOH, you lose the ability to hide or ignore unwanted reports, or sort
> them by trust level.
If you are using `compilation-minor-mode'--yes, the minor mode and not
the major mode--you can have goodness of /both/ tabulated list mode
and compilation mode.
Here is an attempt.
(require 'compile)
(add-to-list 'compilation-error-regexp-alist 'org-lint)
(add-to-list 'compilation-error-regexp-alist-alist
(list 'org-lint
"^[[:blank:]]+\\([[:digit:]]+\\)[[:blank:]]+\\(high\\|low\\)[[:blank:]]+\\(.+\\)$"
(lambda nil
(buffer-file-name org-lint--source-buffer))
1 nil nil 1))
(add-hook 'org-lint--report-mode-hook
(defun turn-on-compilation-minor-mode ()
(compilation-minor-mode 1)))
If you mix `compilation-minor-mode' and `tabulated-list-mode', then
you may have to revise the key bindings so that they don't run in to
each other.
1. C-x C-f myfile.org. (See below)
2. M-x org-lint
3. Goto `Warnings' column and press 'S'. Satisfy yourself that
tabulated list commands are still available. Note that the line
numbers are in "arbitrary" order.
4. Go to a random line. Press RET. Press M-g M-n (or M-g M-p)
couple of times. Satisfy yourself that the order of traversal is
controlled by the cursor's position in the report buffer.
Seek a random position in org buffer. Say, bob or eob. Press M-g
M-n (or M-g M-p) couple of times. Satisfy yourself that the order
of traversal is controlled by the cursor's position in the report
buffer.
Contents of myfile.org: (Note that I have replicated the first tree
many more times to get a large number of errors)
* Getting the source
- Start with source that is cloned directly from Savannah[fn:1].
Using a clone of a clone does not work.
If you are a member of Emacs Project use,
#+begin_src
git clone <membername>@git.savannah.gnu.org:/srv/git/emacs/elpa.git
#+end_src
If you are not a member use,
#+begin_src shell
git clone https://git.savannah.gnu.org/git/emacs/elpa.git
#+end_src
- You must then do some setup:
#+begin_src
make setup
#+end_src
That leaves the =packages= directory empty; you must check out the
ones you want.
* Getting the source
- Start with source that is cloned directly from Savannah[fn:1].
Using a clone of a clone does not work.
If you are a member of Emacs Project use,
#+begin_src
git clone <membername>@git.savannah.gnu.org:/srv/git/emacs/elpa.git
#+end_src
If you are not a member use,
#+begin_src shell
git clone https://git.savannah.gnu.org/git/emacs/elpa.git
#+end_src
- You must then do some setup:
#+begin_src
make setup
#+end_src
That leaves the =packages= directory empty; you must check out the
ones you want.
* Getting the source
- Start with source that is cloned directly from Savannah[fn:1].
Using a clone of a clone does not work.
If you are a member of Emacs Project use,
#+begin_src
git clone <membername>@git.savannah.gnu.org:/srv/git/emacs/elpa.git
#+end_src
If you are not a member use,
#+begin_src shell
git clone https://git.savannah.gnu.org/git/emacs/elpa.git
#+end_src
- You must then do some setup:
#+begin_src
make setup
#+end_src
That leaves the =packages= directory empty; you must check out the
ones you want.
* Getting the source
- Start with source that is cloned directly from Savannah[fn:1].
Using a clone of a clone does not work.
If you are a member of Emacs Project use,
#+begin_src
git clone <membername>@git.savannah.gnu.org:/srv/git/emacs/elpa.git
#+end_src
If you are not a member use,
#+begin_src shell
git clone https://git.savannah.gnu.org/git/emacs/elpa.git
#+end_src
- You must then do some setup:
#+begin_src
make setup
#+end_src
That leaves the =packages= directory empty; you must check out the
ones you want.
* Getting the source
- Start with source that is cloned directly from Savannah[fn:1].
Using a clone of a clone does not work.
If you are a member of Emacs Project use,
#+begin_src
git clone <membername>@git.savannah.gnu.org:/srv/git/emacs/elpa.git
#+end_src
If you are not a member use,
#+begin_src shell
git clone https://git.savannah.gnu.org/git/emacs/elpa.git
#+end_src
- You must then do some setup:
#+begin_src
make setup
#+end_src
That leaves the =packages= directory empty; you must check out the
ones you want.
- Re: Bug: Error while exporting o TexInfo. Html export works fine. [9.4.4 (release_9.4.4 @ /usr/local/share/emacs/28.0.50/lisp/org/)], (continued)
- Re: Bug: Error while exporting o TexInfo. Html export works fine. [9.4.4 (release_9.4.4 @ /usr/local/share/emacs/28.0.50/lisp/org/)], Ramesh Nedunchezian, 2021/04/02
- Re: Bug: Error while exporting o TexInfo. Html export works fine. [9.4.4 (release_9.4.4 @ /usr/local/share/emacs/28.0.50/lisp/org/)], Nicolas Goaziou, 2021/04/02
- Re: Bug: Error while exporting o TexInfo. Html export works fine. [9.4.4 (release_9.4.4 @ /usr/local/share/emacs/28.0.50/lisp/org/)], Ramesh Nedunchezian, 2021/04/03
- Re: Bug: Error while exporting o TexInfo. Html export works fine. [9.4.4 (release_9.4.4 @ /usr/local/share/emacs/28.0.50/lisp/org/)], Nicolas Goaziou, 2021/04/03
- Re: Bug: Error while exporting o TexInfo. Html export works fine. [9.4.4 (release_9.4.4 @ /usr/local/share/emacs/28.0.50/lisp/org/)], Ramesh Nedunchezian, 2021/04/03
- Re: Bug: Error while exporting o TexInfo. Html export works fine. [9.4.4 (release_9.4.4 @ /usr/local/share/emacs/28.0.50/lisp/org/)], Ramesh Nedunchezian, 2021/04/03
- Re: Bug: Error while exporting o TexInfo. Html export works fine. [9.4.4 (release_9.4.4 @ /usr/local/share/emacs/28.0.50/lisp/org/)], Ramesh Nedunchezian, 2021/04/03
- Re: Bug: Error while exporting o TexInfo. Html export works fine. [9.4.4 (release_9.4.4 @ /usr/local/share/emacs/28.0.50/lisp/org/)], Nicolas Goaziou, 2021/04/03
- Re: Bug: Error while exporting o TexInfo. Html export works fine. [9.4.4 (release_9.4.4 @ /usr/local/share/emacs/28.0.50/lisp/org/)],
Ramesh Nedunchezian <=
- Re: Bug: Error while exporting o TexInfo. Html export works fine. [9.4.4 (release_9.4.4 @ /usr/local/share/emacs/28.0.50/lisp/org/)], Nicolas Goaziou, 2021/04/07
- Re: Bug: Error while exporting o TexInfo. Html export works fine. [9.4.4 (release_9.4.4 @ /usr/local/share/emacs/28.0.50/lisp/org/)], Ramesh Nedunchezian, 2021/04/08
- Re: Bug: Error while exporting o TexInfo. Html export works fine. [9.4.4 (release_9.4.4 @ /usr/local/share/emacs/28.0.50/lisp/org/)], Nicolas Goaziou, 2021/04/19