[Freeipmi-devel] Re: FreeIPMI-0.7.1 and HP DL 585

[Won De Erick]

> ----- Original Message ----

> From: Al Chu <address@hidden>
> To: Won De Erick <address@hidden>
> Cc: address@hidden
> Sent: Thursday, November 20, 2008 1:50:21 AM
> Subject: Re: FreeIPMI-0.7.1 and HP DL 585
> 
> 
Hey Won,
> 
> Comments inlined below.
> 
> On Tue, 2008-11-18 at 17:57 -0800, Won De Erick wrote:
> 
> > fiid_obj_get: auxiliary_firmware_revision_info: no data set
> 
> Re-looking at the spec, the Auxiliary firmware info is actually
> optional, not required.  So this is a bug in FreeIPMI.  I will fix this
> and get out a beta release for you.
> 
Thanks for this, I'll let you know of the result later. However, i usually 
install FreeIPMI from FreeBSD ports due to dependency errors when installing 
from tarbals.

> > 
> > # ipmi-sensors
> > 1: UID Light (OEM Reserved): [OEM State = 0000h]
> 
> 
> The output being so different than ipmimonitoring is definitely odd.
> Could you please run with --debug and get me the output.
> 
> 

Please attached file for the complete result. I noticed bad completion code at 
the end of the output.

# ipmi-sensors --debug
=====================================================
Get SDR Repository Info Request
=====================================================
[              20h] = cmd[ 8b]
=====================================================
Get SDR Repository Info Response
=====================================================
[              20h] = cmd[ 8b]
[               0h] = comp_code[ 8b]
[               1h] = sdr_version_major[ 4b]
[               5h] = sdr_version_minor[ 4b]
[              1Eh] = record_count[16b]
[            FFFFh] = free_space[16b]
[        FFFFFFFFh] = most_recent_addition_timestamp[32b]
[        FFFFFFFFh] = most_recent_erase_timestamp[32b]
[               0h] = get_sdr_repository_allocation_info_command_supported[ 1b]
[               1h] = reserve_sdr_repository_command_supported[ 1b]
[               0h] = partial_add_sdr_command_supported[ 1b]
[               1h] = delete_sdr_command_supported[ 1b]
[               0h] = reserved[ 1b]
[               0h] = 
modal_non_modal_sdr_repository_update_operation_supported[ 2b]
[               0h] = overflow_flag[ 1b]

.... [CUT]

Get Sensor Thresholds Response
=====================================================
[              27h] = cmd[ 8b]
[              C1h] = comp_code[ 8b]
ipmi_cmd_get_sensor_thresholds: bad completion code: command invalid/not support


Thanks,

Won

hpdl585-ipmi-sensors-debug.txt
Description: Text document