RE: [Freeipmi-devel] Intel SR2500 ipmi-sensors

[Albert Chu]

Hey Viet,

Without anything else to go on, it is certainly possible there is a bug
in your system.  Have you filed a bug w/ Intel or the appropriate
vendor?

Al

On Wed, 2010-09-01 at 11:35 -0700, Viet Le wrote:
> 
> > -----Original Message-----
> > From: address@hidden [mailto:freeipmi-
> > address@hidden On Behalf Of Anand Babu
> > Periasamy
> > Sent: Tuesday, August 31, 2010 9:06 PM
> > To: address@hidden
> > Subject: Re: [Freeipmi-devel] Intel SR2500 ipmi-sensors
> > 
> > On 08/31/2010 01:09 PM, Andy Cress wrote:
> > > Somebody unplugged the NIC cable.
> > >
> > > Andy
> > >
> > > *From:* address@hidden
> > > [mailto:address@hidden
> > > *On Behalf Of *Viet Le
> > > *Sent:* Tuesday, August 31, 2010 3:41 PM
> > > *To:* address@hidden
> > > *Subject:* [Freeipmi-devel] Intel SR2500 ipmi-sensors
> > >
> > > Hello:
> > >
> > > The ipmi-sensors tool is giving me the following reading:
> > >
> > > "38: Physical Scrty (Platform Chassis Intrusion): [LAN Leash Lost
> > > (system is unplugged from LAN)]"
> > >
> > > I am asked if as what does it mean and if there is a way to change it
> > to OK.
> > >
> > > I would appreciate any helps.
> > 
> > It cloud mean unplugged network cable or chassis intrusion switch on.
> > There is a tiny
> > switch that turns on if you open the chassis cover. It typically looks
> > like a press-button
> > type switch beneath the cover.
> > 
> 
> Hello All:
> 
> Tested with lab unit, and see the following:
> 
> 1. Unplugged the LAN cable, get the following error:
> Physical Scrty (Platform Chassis Intrusion): [LAN Leash Lost (system is 
> unplugged from LAN)]"
> 
> 2. Open the chassis cover:
> Physical Scrty (Platform Chassis Intrusion): [General Chassis  Intrusion]
> 
> So the original messages asked was indicating that the LAN cable is 
> unplugged. 
> 
> The problem is: the LAN cable is indeed connected:
> 
> Network Interface Parameter Configuration(ifconfig -a)
> 
> em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>       options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
>       inet6 fe80::215:17ff:fede:8910%em0 prefixlen 64 scopeid 0x1 
>       inet x.x.x.x netmask 0xffffffc0 broadcast x.x.x.x
>       ether 00:15:17:de:89:10
>       media: Ethernet autoselect (100baseTX <full-duplex>)
>       status: active
> em1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
>       options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
>       ether 00:15:17:de:89:11
>       media: Ethernet autoselect
>       status: no carrier
>  
> Are there any other cases that cause this issue ?
> 
> Thanks
> Viet
> 
> 
> 
> _______________________________________________
> Freeipmi-devel mailing list
> address@hidden
> http://*lists.gnu.org/mailman/listinfo/freeipmi-devel
> 
-- 
Albert Chu
address@hidden
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory