[SCM] gawk branch, feature/mdim-start-again, updated. gawk-4.1.0-4754-ga

gawk-diffs
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[SCM] gawk branch, feature/mdim-start-again, updated. gawk-4.1.0-4754-ga

From:	Arnold Robbins
Subject:	[SCM] gawk branch, feature/mdim-start-again, updated. gawk-4.1.0-4754-ga85b4b76
Date:	Thu, 30 Jun 2022 14:52:15 -0400 (EDT)
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "gawk".

The branch, feature/mdim-start-again has been updated
       via  a85b4b76890962a2c47f15ab76e0462e5c795dd5 (commit)
      from  342bd54e3e87c0b127fcdb1296f4b4ca96b863fd (commit)

Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.

- Log -----------------------------------------------------------------
http://git.sv.gnu.org/cgit/gawk.git/commit/?id=a85b4b76890962a2c47f15ab76e0462e5c795dd5

commit a85b4b76890962a2c47f15ab76e0462e5c795dd5
Author: Arnold D. Robbins <arnold@skeeve.com>
Date:   Thu Jun 30 21:51:45 2022 +0300

    Fix TOP_SCALAR and POP_SCALAR for Node_elem_new.

diff --git a/ChangeLog b/ChangeLog
index 28bb59ef..51e5f56f 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,8 @@
+2022-06-30         Arnold D. Robbins     <arnold@skeeve.com>
+
+       * awk.h (POP_SCALAR): Convert Node_elem_new into a scalar.
+       (TOP_SCALAR): Ditto.
+
 2022-06-20         Arnold D. Robbins     <arnold@skeeve.com>
 
        * NEWS: MPFR is now "on parole" instead of deprecated.
diff --git a/awk.h b/awk.h
index 6ff88677..4d6f0a6b 100644
--- a/awk.h
+++ b/awk.h
@@ -1880,6 +1880,8 @@ POP_SCALAR()
 
        if (t->type == Node_var_array)
                fatal(_("attempt to use array `%s' in a scalar context"), 
array_vname(t));
+       else if (t->type == Node_elem_new)
+               t = elem_new_to_scalar(t);
 
        return t;
 }
@@ -1893,6 +1895,8 @@ TOP_SCALAR()
 
        if (t->type == Node_var_array)
                fatal(_("attempt to use array `%s' in a scalar context"), 
array_vname(t));
+       else if (t->type == Node_elem_new)
+               t = elem_new_to_scalar(t);
 
        return t;
 }
diff --git a/pc/ChangeLog b/pc/ChangeLog
index 15287b22..dd2862db 100644
--- a/pc/ChangeLog
+++ b/pc/ChangeLog
@@ -1,3 +1,7 @@
+2022-06-30         Arnold D. Robbins     <arnold@skeeve.com>
+
+       * Makefile.tst: Regenerated.
+
 2022-06-02         Arnold D. Robbins     <arnold@skeeve.com>
 
        * Makefile.tst: Regenerated.
diff --git a/pc/Makefile.tst b/pc/Makefile.tst
index 54d86dca..bffbe471 100644
--- a/pc/Makefile.tst
+++ b/pc/Makefile.tst
@@ -202,7 +202,7 @@ GAWK_EXT_TESTS = \
        indirectcall3 indirectbuiltin2 \
        inf-nan-torture intarray iolint isarrayunset lint lintexp \
        lintindex lintint lintlength lintold lintplus lintset lintwarn \
-       mdim1 mdim2 mdim3 \
+       mdim1 mdim2 mdim3 mdim4 \
        manyfiles match1 match2 match3 mbstr1 mbstr2 mixed1 mktime \
        modifiers muldimposix nastyparm negtime next nondec nondec2 \
        nonfatal1 nonfatal2 nonfatal3 nsawk1a nsawk1b nsawk1c nsawk2a \
@@ -3023,6 +3023,11 @@ mdim3:
        @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk  >_$@ 2>&1 || echo EXIT CODE: 
$$? >>_$@
        @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@
 
+mdim4:
+       @echo $@
+       @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk  < "$(srcdir)"/$@.in >_$@ 2>&1 
|| echo EXIT CODE: $$? >>_$@
+       @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@
+
 match1:
        @echo $@
        @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk  >_$@ 2>&1 || echo EXIT CODE: 
$$? >>_$@
diff --git a/test/ChangeLog b/test/ChangeLog
index 7bd6b3c8..7345018a 100644
--- a/test/ChangeLog
+++ b/test/ChangeLog
@@ -1,3 +1,8 @@
+2022-06-30         Arnold D. Robbins     <arnold@skeeve.com>
+
+       * Makefile.am (EXTRA_DIST): mdim4: new test.
+       * mdim4.awk, mdim4.in, mdim4.ok: New files.
+
 2022-06-02         Arnold D. Robbins     <arnold@skeeve.com>
 
        * Makefile.am (EXTRA_DIST): mdim3: new test.
diff --git a/test/Makefile.am b/test/Makefile.am
index fe4872f9..2e85bcca 100644
--- a/test/Makefile.am
+++ b/test/Makefile.am
@@ -684,6 +684,9 @@ EXTRA_DIST = \
        mdim2.ok \
        mdim3.awk \
        mdim3.ok \
+       mdim4.awk \
+       mdim4.in \
+       mdim4.ok \
        modifiers.sh \
        modifiers.ok \
        muldimposix.awk \
@@ -1482,7 +1485,7 @@ GAWK_EXT_TESTS = \
        indirectcall3 indirectbuiltin2 \
        inf-nan-torture intarray iolint isarrayunset lint lintexp \
        lintindex lintint lintlength lintold lintplus lintset lintwarn \
-       mdim1 mdim2 mdim3 \
+       mdim1 mdim2 mdim3 mdim4 \
        manyfiles match1 match2 match3 mbstr1 mbstr2 mixed1 mktime \
        modifiers muldimposix nastyparm negtime next nondec nondec2 \
        nonfatal1 nonfatal2 nonfatal3 nsawk1a nsawk1b nsawk1c nsawk2a \
diff --git a/test/Makefile.in b/test/Makefile.in
index f838d388..901df127 100644
--- a/test/Makefile.in
+++ b/test/Makefile.in
@@ -951,6 +951,9 @@ EXTRA_DIST = \
        mdim2.ok \
        mdim3.awk \
        mdim3.ok \
+       mdim4.awk \
+       mdim4.in \
+       mdim4.ok \
        modifiers.sh \
        modifiers.ok \
        muldimposix.awk \
@@ -1749,7 +1752,7 @@ GAWK_EXT_TESTS = \
        indirectcall3 indirectbuiltin2 \
        inf-nan-torture intarray iolint isarrayunset lint lintexp \
        lintindex lintint lintlength lintold lintplus lintset lintwarn \
-       mdim1 mdim2 mdim3 \
+       mdim1 mdim2 mdim3 mdim4 \
        manyfiles match1 match2 match3 mbstr1 mbstr2 mixed1 mktime \
        modifiers muldimposix nastyparm negtime next nondec nondec2 \
        nonfatal1 nonfatal2 nonfatal3 nsawk1a nsawk1b nsawk1c nsawk2a \
@@ -4733,6 +4736,11 @@ mdim3:
        @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk  >_$@ 2>&1 || echo EXIT CODE: 
$$? >>_$@
        @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@
 
+mdim4:
+       @echo $@
+       @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk  < "$(srcdir)"/$@.in >_$@ 2>&1 
|| echo EXIT CODE: $$? >>_$@
+       @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@
+
 match1:
        @echo $@
        @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk  >_$@ 2>&1 || echo EXIT CODE: 
$$? >>_$@
diff --git a/test/Maketests b/test/Maketests
index 3015eb34..e967f845 100644
--- a/test/Maketests
+++ b/test/Maketests
@@ -1743,6 +1743,11 @@ mdim3:
        @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk  >_$@ 2>&1 || echo EXIT CODE: 
$$? >>_$@
        @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@
 
+mdim4:
+       @echo $@
+       @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk  < "$(srcdir)"/$@.in >_$@ 2>&1 
|| echo EXIT CODE: $$? >>_$@
+       @-$(CMP) "$(srcdir)"/$@.ok _$@ && rm -f _$@
+
 match1:
        @echo $@
        @-AWKPATH="$(srcdir)" $(AWK) -f $@.awk  >_$@ 2>&1 || echo EXIT CODE: 
$$? >>_$@
diff --git a/test/mdim1.awk b/test/mdim1.awk
new file mode 100644
index 00000000..c1f398d6
--- /dev/null
+++ b/test/mdim1.awk
@@ -0,0 +1,15 @@
+BEGIN {
+       print "typeof(x[0]) is", typeof(x[0])
+       x[1] = x[0]
+       print "typeof(x[1]) is", typeof(x[1])
+       x[0][1] = "xx"
+       print "typeof(x[0]) is", typeof(x[0])
+       print "typeof(x[0][1]) is", typeof(x[0][1])
+       print "typeof(y) is", typeof(y)
+       z = y
+       print "typeof(y) is", typeof(y)
+       print "typeof(z) is", typeof(z)
+
+       x[1][0] = "xx"  # this will fatal
+       print x[1][0]
+}
diff --git a/test/mdim1.ok b/test/mdim1.ok
new file mode 100644
index 00000000..1247fab1
--- /dev/null
+++ b/test/mdim1.ok
@@ -0,0 +1,9 @@
+typeof(x[0]) is untyped
+typeof(x[1]) is unassigned
+typeof(x[0]) is array
+typeof(x[0][1]) is string
+typeof(y) is untyped
+typeof(y) is unassigned
+typeof(z) is unassigned
+gawk: mdim1.awk:13: fatal: attempt to use scalar `x["1"]' as an array
+EXIT CODE: 2
diff --git a/test/mdim2.awk b/test/mdim2.awk
new file mode 100644
index 00000000..7bc0c127
--- /dev/null
+++ b/test/mdim2.awk
@@ -0,0 +1,9 @@
+BEGIN {
+       p(a[0])
+       print a[0][0]
+}
+
+function p(f)
+{
+       f[0] = 1
+}
diff --git a/test/mdim2.ok b/test/mdim2.ok
new file mode 100644
index 00000000..d00491fd
--- /dev/null
+++ b/test/mdim2.ok
@@ -0,0 +1 @@
+1
diff --git a/test/mdim3.awk b/test/mdim3.awk
new file mode 100644
index 00000000..3cd56b61
--- /dev/null
+++ b/test/mdim3.awk
@@ -0,0 +1,29 @@
+BEGIN {
+   inp[0] = "blah"
+   inp[1] = "blah"
+   inp[2] = ""
+   inp[3] = "Summary Statistics"
+   inp[4] = "temperature,0"
+   inp[5] = "rain,1"
+
+   for (i = 1; i <= 40; i++) {
+      print "i =", i
+      mode = 0
+      nr = 0
+      delete val
+      for (j = 0; j < 6; j++) {
+        x = inp[j]
+        print "\tj =", j
+#       if (i == 27 && j == 3)
+#              stopme()
+        nf = split(x,f,",")
+        print "\tnf =", nf
+        if (++nr > 1) {
+           if (!nf)
+              mode = 1
+           else if (mode == 1)
+              val[f[1]] = f[2]
+        }
+      }
+   }
+}
diff --git a/test/mdim3.ok b/test/mdim3.ok
new file mode 100644
index 00000000..a8f05990
--- /dev/null
+++ b/test/mdim3.ok
@@ -0,0 +1,520 @@
+i = 1
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
+i = 2
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
+i = 3
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
+i = 4
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
+i = 5
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
+i = 6
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
+i = 7
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
+i = 8
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
+i = 9
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
+i = 10
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
+i = 11
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
+i = 12
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
+i = 13
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
+i = 14
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
+i = 15
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
+i = 16
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
+i = 17
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
+i = 18
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
+i = 19
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
+i = 20
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
+i = 21
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
+i = 22
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
+i = 23
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
+i = 24
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
+i = 25
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
+i = 26
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
+i = 27
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
+i = 28
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
+i = 29
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
+i = 30
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
+i = 31
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
+i = 32
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
+i = 33
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
+i = 34
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
+i = 35
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
+i = 36
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
+i = 37
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
+i = 38
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
+i = 39
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
+i = 40
+       j = 0
+       nf = 1
+       j = 1
+       nf = 1
+       j = 2
+       nf = 0
+       j = 3
+       nf = 1
+       j = 4
+       nf = 2
+       j = 5
+       nf = 2
diff --git a/test/mdim4.awk b/test/mdim4.awk
new file mode 100644
index 00000000..8f5e0f21
--- /dev/null
+++ b/test/mdim4.awk
@@ -0,0 +1,168 @@
+BEGIN {
+S["am__EXEEXT_FALSE"]=""
+S["am__EXEEXT_TRUE"]="#"
+S["LTLIBOBJS"]=""
+S["subdirs"]=" extension"
+S["GAWKLIBEXT"]="so"
+S["LIBMPFR"]="-lmpfr -lgmp"
+S["LIBREADLINE"]="-lreadline"
+S["SOCKET_LIBS"]=""
+S["ENABLE_EXTENSIONS_FALSE"]="#"
+S["ENABLE_EXTENSIONS_TRUE"]=""
+S["USE_PERSISTENT_MALLOC_FALSE"]="#"
+S["USE_PERSISTENT_MALLOC_TRUE"]=""
+S["LIBSIGSEGV_PREFIX"]=""
+S["LTLIBSIGSEGV"]=""
+S["LIBSIGSEGV"]=""
+S["HAVE_LIBSIGSEGV"]="no"
+S["LIBOBJS"]=""
+S["TEST_CROSS_COMPILE_FALSE"]=""
+S["TEST_CROSS_COMPILE_TRUE"]="#"
+S["POSUB"]="po"
+S["LTLIBINTL"]=""
+S["LIBINTL"]=""
+S["INTLLIBS"]=""
+S["LTLIBICONV"]="-liconv"
+S["LIBICONV"]="-liconv"
+S["INTL_MACOSX_LIBS"]=""
+S["XGETTEXT_EXTRA_OPTIONS"]=""
+S["MSGMERGE_FOR_MSGFMT_OPTION"]="--for-msgfmt"
+S["MSGMERGE"]="/usr/local/bin/msgmerge"
+S["XGETTEXT_015"]="/usr/local/bin/xgettext"
+S["XGETTEXT"]="/usr/local/bin/xgettext"
+S["GMSGFMT_015"]="/usr/local/bin/msgfmt"
+S["GMSGFMT"]="/usr/local/bin/msgfmt"
+S["MSGFMT"]="/usr/local/bin/msgfmt"
+S["GETTEXT_MACRO_VERSION"]="0.20"
+S["USE_NLS"]="yes"
+S["SED"]="/bin/sed"
+S["ZOS_FAIL"]=""
+S["acl_shlibext"]="so"
+S["ac_ct_AR"]="ar"
+S["AR"]="ar"
+S["RANLIB"]="ranlib"
+S["CPP"]="gcc -E"
+S["LN_S"]="ln -s"
+S["YFLAGS"]=""
+S["YACC"]="bison -y"
+S["EGREP"]="/bin/grep -E"
+S["GREP"]="/bin/grep"
+S["am__fastdepCC_FALSE"]="#"
+S["am__fastdepCC_TRUE"]=""
+S["CCDEPMODE"]="depmode=gcc3"
+S["am__nodep"]="_no"
+S["AMDEPBACKSLASH"]="\\"
+S["AMDEP_FALSE"]="#"
+S["AMDEP_TRUE"]=""
+S["am__include"]="include"
+S["DEPDIR"]=".deps"
+S["OBJEXT"]="o"
+S["EXEEXT"]=""
+S["ac_ct_CC"]="gcc"
+S["CPPFLAGS"]=""
+S["LDFLAGS"]=" -no-pie"
+S["CFLAGS"]="-g -O2 -DARRAYDEBUG -DYYDEBUG -DLOCALEDEBUG -DMEMDEBUG -Wall 
-fno-builtin -g3 -ggdb3"
+S["CC"]="gcc"
+S["host_os"]="linux-gnu"
+S["host_vendor"]="pc"
+S["host_cpu"]="x86_64"
+S["host"]="x86_64-pc-linux-gnu"
+S["build_os"]="linux-gnu"
+S["build_vendor"]="pc"
+S["build_cpu"]="x86_64"
+S["build"]="x86_64-pc-linux-gnu"
+S["pkgextensiondir"]="${pkglibdir}"
+S["AM_BACKSLASH"]="\\"
+S["AM_DEFAULT_VERBOSITY"]="1"
+S["AM_DEFAULT_V"]="$(AM_DEFAULT_VERBOSITY)"
+S["AM_V"]="$(V)"
+S["CSCOPE"]="cscope"
+S["ETAGS"]="etags"
+S["CTAGS"]="ctags"
+S["am__untar"]="$${TAR-tar} xf -"
+S["am__tar"]="$${TAR-tar} chof - \"$$tardir\""
+S["AMTAR"]="$${TAR-tar}"
+S["am__leading_dot"]="."
+S["SET_MAKE"]=""
+S["AWK"]="gawk"
+S["mkdir_p"]="$(MKDIR_P)"
+S["MKDIR_P"]="/bin/mkdir -p"
+S["INSTALL_STRIP_PROGRAM"]="$(install_sh) -c -s"
+S["STRIP"]=""
+S["install_sh"]="${SHELL} /home/arnold/Gnu/gawk/gawk.git/build-aux/install-sh"
+S["MAKEINFO"]="${SHELL} '/home/arnold/Gnu/gawk/gawk.git/build-aux/missing' 
makeinfo"
+S["AUTOHEADER"]="${SHELL} '/home/arnold/Gnu/gawk/gawk.git/build-aux/missing' 
autoheader"
+S["AUTOMAKE"]="${SHELL} '/home/arnold/Gnu/gawk/gawk.git/build-aux/missing' 
automake-1.16"
+S["AUTOCONF"]="${SHELL} '/home/arnold/Gnu/gawk/gawk.git/build-aux/missing' 
autoconf"
+S["ACLOCAL"]="${SHELL} '/home/arnold/Gnu/gawk/gawk.git/build-aux/missing' 
aclocal-1.16"
+S["VERSION"]="5.1.60"
+S["PACKAGE"]="gawk"
+S["CYGPATH_W"]="echo"
+S["am__isrc"]=""
+S["INSTALL_DATA"]="${INSTALL} -m 644"
+S["INSTALL_SCRIPT"]="${INSTALL}"
+S["INSTALL_PROGRAM"]="${INSTALL}"
+S["target_alias"]=""
+S["host_alias"]=""
+S["build_alias"]=""
+S["LIBS"]="-ldl -lm "
+S["ECHO_T"]=""
+S["ECHO_N"]="-n"
+S["ECHO_C"]=""
+S["DEFS"]="-DHAVE_CONFIG_H"
+S["mandir"]="${datarootdir}/man"
+S["localedir"]="${datarootdir}/locale"
+S["libdir"]="${exec_prefix}/lib"
+S["psdir"]="${docdir}"
+S["pdfdir"]="${docdir}"
+S["dvidir"]="${docdir}"
+S["htmldir"]="${docdir}"
+S["infodir"]="${datarootdir}/info"
+S["docdir"]="${datarootdir}/doc/${PACKAGE_TARNAME}"
+S["oldincludedir"]="/usr/include"
+S["includedir"]="${prefix}/include"
+S["runstatedir"]="${localstatedir}/run"
+S["localstatedir"]="${prefix}/var"
+S["sharedstatedir"]="${prefix}/com"
+S["sysconfdir"]="${prefix}/etc"
+S["datadir"]="${datarootdir}"
+S["datarootdir"]="${prefix}/share"
+S["libexecdir"]="${exec_prefix}/libexec"
+S["sbindir"]="${exec_prefix}/sbin"
+S["bindir"]="${exec_prefix}/bin"
+S["program_transform_name"]="s,x,x,"
+S["prefix"]="/usr/local"
+S["exec_prefix"]="${prefix}"
+S["PACKAGE_URL"]="https://www.gnu.org/software/gawk/";
+S["PACKAGE_BUGREPORT"]="bug-gawk@gnu.org"
+S["PACKAGE_STRING"]="GNU Awk 5.1.60"
+S["PACKAGE_VERSION"]="5.1.60"
+S["PACKAGE_TARNAME"]="gawk"
+S["PACKAGE_NAME"]="GNU Awk"
+S["PATH_SEPARATOR"]=":"
+S["SHELL"]="/bin/bash"
+S["am__quote"]=""
+  for (key in S) S_is_set[key] = 1
+  FS = ""
+
+}
+{
+  line = $ 0
+  nfields = split(line, field, "@")
+  substed = 0
+  len = length(field[1])
+  for (i = 2; i < nfields; i++) {
+    key = field[i]
+    keylen = length(key)
+    if (S_is_set[key]) {
+      value = S[key]
+      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+      len += length(value) + length(field[++i])
+      substed = 1
+    } else
+      len += 1 + keylen
+  }
+
+  print line
+}
+
diff --git a/test/mdim4.in b/test/mdim4.in
new file mode 100644
index 00000000..597f3a8b
--- /dev/null
+++ b/test/mdim4.in
@@ -0,0 +1,1373 @@
+# Makefile.in generated by automake 1.16.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2021 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#
+# Makefile.am --- automake input file for gawk
+#
+# Copyright (C) 2000-2021 the Free Software Foundation, Inc.
+#
+# This file is part of GAWK, the GNU implementation of the
+# AWK Programming Language.
+#
+# GAWK is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# GAWK is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, 
USA
+#
+
+
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \  ]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs  ]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+
+# Build in extension before test so that
+#      ./configure && make check
+# works properly too.
+@ENABLE_EXTENSIONS_TRUE@am__append_1 = extension
+bin_PROGRAMS = gawk$(EXEEXT)
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/arch.m4 \
+       $(top_srcdir)/m4/codeset.m4 $(top_srcdir)/m4/gettext.m4 \
+       $(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \
+       $(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lcmessage.m4 \
+       $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
+       $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libsigsegv.m4 \
+       $(top_srcdir)/m4/longlong.m4 $(top_srcdir)/m4/mpfr.m4 \
+       $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/noreturn.m4 \
+       $(top_srcdir)/m4/pma.m4 $(top_srcdir)/m4/po.m4 \
+       $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/readline.m4 \
+       $(top_srcdir)/m4/socket.m4 \
+       $(top_srcdir)/m4/triplet-transformation.m4 \
+       $(top_srcdir)/m4/ulonglong.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+       $(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
+       $(am__configure_deps) $(include_HEADERS) $(am__DIST_COMMON)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES = gawkbug
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" \
+       "$(DESTDIR)$(includedir)"
+PROGRAMS = $(bin_PROGRAMS)
+am__objects_1 = array.$(OBJEXT) awkgram.$(OBJEXT) builtin.$(OBJEXT) \
+       cint_array.$(OBJEXT) command.$(OBJEXT) debug.$(OBJEXT) \
+       eval.$(OBJEXT) ext.$(OBJEXT) field.$(OBJEXT) \
+       floatcomp.$(OBJEXT) gawkapi.$(OBJEXT) gawkmisc.$(OBJEXT) \
+       int_array.$(OBJEXT) io.$(OBJEXT) main.$(OBJEXT) mpfr.$(OBJEXT) \
+       msg.$(OBJEXT) node.$(OBJEXT) profile.$(OBJEXT) re.$(OBJEXT) \
+       replace.$(OBJEXT) str_array.$(OBJEXT) symbol.$(OBJEXT) \
+       version.$(OBJEXT)
+am_gawk_OBJECTS = $(am__objects_1)
+gawk_OBJECTS = $(am_gawk_OBJECTS)
+gawk_LDADD = $(LDADD)
+am__DEPENDENCIES_1 =
+gawk_DEPENDENCIES = support/libsupport.a $(am__DEPENDENCIES_1) \
+       $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
+       $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
+       $(am__DEPENDENCIES_1)
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+SCRIPTS = $(bin_SCRIPTS)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = -I.@am__isrc@
+depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
+am__maybe_remake_depfiles = depfiles
+am__depfiles_remade = ./$(DEPDIR)/array.Po ./$(DEPDIR)/awkgram.Po \
+       ./$(DEPDIR)/builtin.Po ./$(DEPDIR)/cint_array.Po \
+       ./$(DEPDIR)/command.Po ./$(DEPDIR)/debug.Po \
+       ./$(DEPDIR)/eval.Po ./$(DEPDIR)/ext.Po ./$(DEPDIR)/field.Po \
+       ./$(DEPDIR)/floatcomp.Po ./$(DEPDIR)/gawkapi.Po \
+       ./$(DEPDIR)/gawkmisc.Po ./$(DEPDIR)/int_array.Po \
+       ./$(DEPDIR)/io.Po ./$(DEPDIR)/main.Po ./$(DEPDIR)/mpfr.Po \
+       ./$(DEPDIR)/msg.Po ./$(DEPDIR)/node.Po ./$(DEPDIR)/profile.Po \
+       ./$(DEPDIR)/re.Po ./$(DEPDIR)/replace.Po \
+       ./$(DEPDIR)/str_array.Po ./$(DEPDIR)/symbol.Po \
+       ./$(DEPDIR)/version.Po
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+       $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+am__yacc_c2h = sed -e s/cc$$/hh/ -e s/cpp$$/hpp/ -e s/cxx$$/hxx/ \
+                  -e s/c++$$/h++/ -e s/c$$/h/
+YACCCOMPILE = $(YACC) $(AM_YFLAGS) $(YFLAGS)
+AM_V_YACC = $(am__v_YACC_@AM_V@)
+am__v_YACC_ = $(am__v_YACC_@AM_DEFAULT_V@)
+am__v_YACC_0 = @echo "  YACC    " $@;
+am__v_YACC_1 = 
+YLWRAP = $(top_srcdir)/build-aux/ylwrap
+SOURCES = $(gawk_SOURCES)
+DIST_SOURCES = $(gawk_SOURCES)
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+       ctags-recursive dvi-recursive html-recursive info-recursive \
+       install-data-recursive install-dvi-recursive \
+       install-exec-recursive install-html-recursive \
+       install-info-recursive install-pdf-recursive \
+       install-ps-recursive install-recursive installcheck-recursive \
+       installdirs-recursive pdf-recursive ps-recursive \
+       tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+HEADERS = $(include_HEADERS)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive        \
+  distclean-recursive maintainer-clean-recursive
+am__recursive_targets = \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+       cscope distdir distdir-am dist dist-all distcheck
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \
+       configh.in
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+DIST_SUBDIRS = support . extension extras doc awklib po test
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/configh.in \
+       $(srcdir)/gawkbug.in $(top_srcdir)/build-aux/ar-lib \
+       $(top_srcdir)/build-aux/compile \
+       $(top_srcdir)/build-aux/config.guess \
+       $(top_srcdir)/build-aux/config.rpath \
+       $(top_srcdir)/build-aux/config.sub \
+       $(top_srcdir)/build-aux/depcomp \
+       $(top_srcdir)/build-aux/install-sh \
+       $(top_srcdir)/build-aux/missing $(top_srcdir)/build-aux/ylwrap \
+       ABOUT-NLS AUTHORS COPYING ChangeLog INSTALL NEWS README TODO \
+       awkgram.c build-aux/ChangeLog build-aux/ar-lib \
+       build-aux/compile build-aux/config.guess \
+       build-aux/config.rpath build-aux/config.sub build-aux/depcomp \
+       build-aux/install-sh build-aux/ltmain.sh build-aux/missing \
+       build-aux/texinfo.tex build-aux/ylwrap command.c
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+  if test -d "$(distdir)"; then \
+    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+      && rm -rf "$(distdir)" \
+      || { sleep 5 && rm -rf "$(distdir)"; }; \
+  else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
+DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.lz $(distdir).tar.xz
+GZIP_ENV = --best
+DIST_TARGETS = dist-lzip dist-xz dist-gzip
+# Exists only to be overridden by the user if desired.
+AM_DISTCHECK_DVI_TARGET = dvi
+distuninstallcheck_listfiles = find . -type f -print
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
+  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
+distcleancheck_listfiles = find . -type f -print
+
+# Directory for gawk's data files. Automake supplies datadir.
+pkgdatadir = $(datadir)/awk
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CSCOPE = @CSCOPE@
+CTAGS = @CTAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = -DDEFPATH=$(DEFPATH) -DDEFLIBPATH=$(DEFLIBPATH) -DSHLIBEXT=$(SHLIBEXT) 
-DHAVE_CONFIG_H -DGAWK -DLOCALEDIR='"$(datadir)/locale"' -I"$(srcdir)/support"
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+ETAGS = @ETAGS@
+EXEEXT = @EXEEXT@
+GAWKLIBEXT = @GAWKLIBEXT@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+HAVE_LIBSIGSEGV = @HAVE_LIBSIGSEGV@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBMPFR = @LIBMPFR@
+LIBOBJS = @LIBOBJS@
+LIBREADLINE = @LIBREADLINE@
+LIBS = @LIBS@
+LIBSIGSEGV = @LIBSIGSEGV@
+LIBSIGSEGV_PREFIX = @LIBSIGSEGV_PREFIX@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+LTLIBSIGSEGV = @LTLIBSIGSEGV@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGMERGE = @MSGMERGE@
+MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+POSUB = @POSUB@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SOCKET_LIBS = @SOCKET_LIBS@
+STRIP = @STRIP@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+YACC = @YACC@
+YFLAGS = @YFLAGS@
+ZOS_FAIL = @ZOS_FAIL@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+acl_shlibext = @acl_shlibext@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+pkgextensiondir = @pkgextensiondir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+runstatedir = @runstatedir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+subdirs = @subdirs@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+
+# This variable insures that aclocal runs
+# correctly after changing configure.ac
+ACLOCAL_AMFLAGS = -I m4
+AM_CFLAGS = @CFLAGS@
+AM_LDFLAGS = @LDFLAGS@
+
+# Stuff to include in the dist that doesn't need it's own
+# Makefile.am files
+EXTRA_DIST = \
+       ChangeLog.0 \
+       ChangeLog.1 \
+       COPYING \
+       INSTALL \
+       NEWS \
+       NEWS.0 \
+       NEWS.1 \
+       POSIX.STD \
+       README_d \
+       m4 \
+       missing_d \
+       po/README \
+       pc \
+       posix \
+       vms
+
+
+# The order to do things in.
+#
+# Build in support first, since we need the support library.
+#
+# Build explicitly in "." in order to build gawk first, so
+# that `make check' without a prior `make' works.
+
+# Build in awklib after in doc, since we want to extract
+# sample files if doc/gawk.texi changed.
+SUBDIRS = support . $(am__append_1) extras doc awklib po test
+bin_SCRIPTS = gawkbug
+include_HEADERS = gawkapi.h
+BUILT_SOURCES = $(srcdir)/pc/Makefile.tst
+
+# sources for gawk
+base_sources = \
+       array.c \
+       awk.h \
+       awkgram.y \
+       builtin.c \
+       cint_array.c \
+       cmd.h \
+       command.y \
+       custom.h \
+       debug.c \
+       eval.c \
+       ext.c \
+       field.c \
+       floatcomp.c \
+       floatmagic.h \
+       gawkapi.c \
+       gawkapi.h \
+       gawkmisc.c \
+       gettext.h \
+       int_array.c \
+       interpret.h \
+       io.c \
+       mbsupport.h \
+       main.c \
+       mpfr.c \
+       msg.c \
+       node.c \
+       nonposix.h \
+       profile.c \
+       protos.h \
+       re.c \
+       replace.c \
+       str_array.c \
+       symbol.c \
+       version.c
+
+gawk_SOURCES = $(base_sources)
+
+# Get extra libs as needed, Automake will supply LIBINTL and SOCKET_LIBS.
+LDADD = support/libsupport.a \
+       $(LIBSIGSEGV) $(LIBINTL) $(SOCKET_LIBS) $(LIBREADLINE) $(LIBMPFR) \
+       $(LDFLAGS)
+
+
+# stuff for compiling gawk/pgawk
+DEFPATH = '".$(PATH_SEPARATOR)$(pkgdatadir)"'
+
+# shared library support:
+SHLIBEXT = "\"$(GAWKLIBEXT)"\"
+DEFLIBPATH = "\"$(pkgextensiondir)\""
+
+# Get rid of core files when cleaning
+CLEANFILES = core core.* $(bin_SCRIPTS)
+
+# We want hard links for install-exec-hook, below
+LN = ln
+
+# Make copies...
+CP = cp
+
+# For some make's, e.g. OpenBSD, that don't define this
+RM = rm -f
+all: $(BUILT_SOURCES) config.h
+       $(MAKE) $(AM_MAKEFLAGS) all-recursive
+
+.SUFFIXES:
+.SUFFIXES: .c .o .obj .y
+am--refresh: Makefile
+       @:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+       @for dep in $?; do \
+         case '$(am__configure_deps)' in \
+           *$$dep*) \
+             echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
+             $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
+               && exit 0; \
+             exit 1;; \
+         esac; \
+       done; \
+       echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
+       $(am__cd) $(top_srcdir) && \
+         $(AUTOMAKE) --gnu Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+       @case '$?' in \
+         *config.status*) \
+           echo ' $(SHELL) ./config.status'; \
+           $(SHELL) ./config.status;; \
+         *) \
+           echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ 
$(am__maybe_remake_depfiles)'; \
+           cd $(top_builddir) && $(SHELL) ./config.status $@ 
$(am__maybe_remake_depfiles);; \
+       esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure 
$(CONFIG_STATUS_DEPENDENCIES)
+       $(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+       $(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+       $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+
+config.h: stamp-h1
+       @test -f $@ || rm -f stamp-h1
+       @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
+
+stamp-h1: $(srcdir)/configh.in $(top_builddir)/config.status
+       @rm -f stamp-h1
+       cd $(top_builddir) && $(SHELL) ./config.status config.h
+$(srcdir)/configh.in:  $(am__configure_deps) 
+       ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
+       rm -f stamp-h1
+       touch $@
+
+distclean-hdr:
+       -rm -f config.h stamp-h1
+gawkbug: $(top_builddir)/config.status $(srcdir)/gawkbug.in
+       cd $(top_builddir) && $(SHELL) ./config.status $@
+install-binPROGRAMS: $(bin_PROGRAMS)
+       @$(NORMAL_INSTALL)
+       @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+       if test -n "$$list"; then \
+         echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+         $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+       fi; \
+       for p in $$list; do echo "$$p $$p"; done | \
+       sed 's/$(EXEEXT)$$//' | \
+       while read p p1; do if test -f $$p \
+         ; then echo "$$p"; echo "$$p"; else :; fi; \
+       done | \
+       sed -e 'p;s,.*/,,;n;h' \
+           -e 's|.*|.|' \
+           -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+       sed 'N;N;N;s,\n, ,g' | \
+       $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+         { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+           if ($$2 == $$4) files[d] = files[d] " " $$1; \
+           else { print "f", $$3 "/" $$4, $$1; } } \
+         END { for (d in files) print "f", d, files[d] }' | \
+       while read type dir files; do \
+           if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+           test -z "$$files" || { \
+             echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files 
'$(DESTDIR)$(bindir)$$dir'"; \
+             $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files 
"$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+           } \
+       ; done
+
+uninstall-binPROGRAMS:
+       @$(NORMAL_UNINSTALL)
+       @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+       files=`for p in $$list; do echo "$$p"; done | \
+         sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+             -e 's/$$/$(EXEEXT)/' \
+       `; \
+       test -n "$$list" || exit 0; \
+       echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+       cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+       -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+
+gawk$(EXEEXT): $(gawk_OBJECTS) $(gawk_DEPENDENCIES) $(EXTRA_gawk_DEPENDENCIES) 
+       @rm -f gawk$(EXEEXT)
+       $(AM_V_CCLD)$(LINK) $(gawk_OBJECTS) $(gawk_LDADD) $(LIBS)
+install-binSCRIPTS: $(bin_SCRIPTS)
+       @$(NORMAL_INSTALL)
+       @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
+       if test -n "$$list"; then \
+         echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+         $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+       fi; \
+       for p in $$list; do \
+         if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+         if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
+       done | \
+       sed -e 'p;s,.*/,,;n' \
+           -e 'h;s|.*|.|' \
+           -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
+       $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
+         { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+           if ($$2 == $$4) { files[d] = files[d] " " $$1; \
+             if (++n[d] == $(am__install_max)) { \
+               print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
+           else { print "f", d "/" $$4, $$1 } } \
+         END { for (d in files) print "f", d, files[d] }' | \
+       while read type dir files; do \
+            if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+            test -z "$$files" || { \
+              echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+              $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit 
$$?; \
+            } \
+       ; done
+
+uninstall-binSCRIPTS:
+       @$(NORMAL_UNINSTALL)
+       @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
+       files=`for p in $$list; do echo "$$p"; done | \
+              sed -e 's,.*/,,;$(transform)'`; \
+       dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir)
+
+mostlyclean-compile:
+       -rm -f *.$(OBJEXT)
+
+distclean-compile:
+       -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/array.Po@am__quote@ # 
am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/awkgram.Po@am__quote@ # 
am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/builtin.Po@am__quote@ # 
am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cint_array.Po@am__quote@ # 
am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/command.Po@am__quote@ # 
am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/debug.Po@am__quote@ # 
am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eval.Po@am__quote@ # 
am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ext.Po@am__quote@ # 
am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/field.Po@am__quote@ # 
am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/floatcomp.Po@am__quote@ # 
am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gawkapi.Po@am__quote@ # 
am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gawkmisc.Po@am__quote@ # 
am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/int_array.Po@am__quote@ # 
am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/io.Po@am__quote@ # 
am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Po@am__quote@ # 
am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mpfr.Po@am__quote@ # 
am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/msg.Po@am__quote@ # 
am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/node.Po@am__quote@ # 
am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/profile.Po@am__quote@ # 
am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/re.Po@am__quote@ # 
am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/replace.Po@am__quote@ # 
am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/str_array.Po@am__quote@ # 
am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/symbol.Po@am__quote@ # 
am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/version.Po@am__quote@ # 
am--include-marker
+
+$(am__depfiles_remade):
+       @$(MKDIR_P) $(@D)
+       @echo '# dummy' >$@-t && $(am__mv) $@-t $@
+
+am--depfiles: $(am__depfiles_remade)
+
+.c.o:
+@am__fastdepCC_TRUE@   $(AM_V_CC)depbase=`echo $@ | sed 
's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
+@am__fastdepCC_TRUE@   $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< 
&&\
+@am__fastdepCC_TRUE@   $(am__mv) $$depbase.Tpo $$depbase.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@      $(AM_V_CC)source='$<' object='$@' 
libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) 
$(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@  $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@   $(AM_V_CC)depbase=`echo $@ | sed 
's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
+@am__fastdepCC_TRUE@   $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ 
`$(CYGPATH_W) '$<'` &&\
+@am__fastdepCC_TRUE@   $(am__mv) $$depbase.Tpo $$depbase.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@      $(AM_V_CC)source='$<' object='$@' 
libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) 
$(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@  $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) 
'$<'`
+
+.y.c:
+       $(AM_V_YACC)$(am__skipyacc) $(SHELL) $(YLWRAP) $< y.tab.c $@ y.tab.h 
`echo $@ | $(am__yacc_c2h)` y.output $*.output -- $(YACCCOMPILE)
+install-includeHEADERS: $(include_HEADERS)
+       @$(NORMAL_INSTALL)
+       @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
+       if test -n "$$list"; then \
+         echo " $(MKDIR_P) '$(DESTDIR)$(includedir)'"; \
+         $(MKDIR_P) "$(DESTDIR)$(includedir)" || exit 1; \
+       fi; \
+       for p in $$list; do \
+         if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+         echo "$$d$$p"; \
+       done | $(am__base_list) | \
+       while read files; do \
+         echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \
+         $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \
+       done
+
+uninstall-includeHEADERS:
+       @$(NORMAL_UNINSTALL)
+       @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
+       files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+       dir='$(DESTDIR)$(includedir)'; $(am__uninstall_files_from_dir)
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+#     (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+       @fail=; \
+       if $(am__make_keepgoing); then \
+         failcom='fail=yes'; \
+       else \
+         failcom='exit 1'; \
+       fi; \
+       dot_seen=no; \
+       target=`echo $@ | sed s/-recursive//`; \
+       case "$@" in \
+         distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+         *) list='$(SUBDIRS)' ;; \
+       esac; \
+       for subdir in $$list; do \
+         echo "Making $$target in $$subdir"; \
+         if test "$$subdir" = "."; then \
+           dot_seen=yes; \
+           local_target="$$target-am"; \
+         else \
+           local_target="$$target"; \
+         fi; \
+         ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+         || eval $$failcom; \
+       done; \
+       if test "$$dot_seen" = "no"; then \
+         $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+       fi; test -z "$$fail"
+
+ID: $(am__tagged_files)
+       $(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+       set x; \
+       here=`pwd`; \
+       if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+         include_option=--etags-include; \
+         empty_fix=.; \
+       else \
+         include_option=--include; \
+         empty_fix=; \
+       fi; \
+       list='$(SUBDIRS)'; for subdir in $$list; do \
+         if test "$$subdir" = .; then :; else \
+           test ! -f $$subdir/TAGS || \
+             set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+         fi; \
+       done; \
+       $(am__define_uniq_tagged_files); \
+       shift; \
+       if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+         test -n "$$unique" || unique=$$empty_fix; \
+         if test $$# -gt 0; then \
+           $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+             "$$@" $$unique; \
+         else \
+           $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+             $$unique; \
+         fi; \
+       fi
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+       $(am__define_uniq_tagged_files); \
+       test -z "$(CTAGS_ARGS)$$unique" \
+         || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+            $$unique
+
+GTAGS:
+       here=`$(am__cd) $(top_builddir) && pwd` \
+         && $(am__cd) $(top_srcdir) \
+         && gtags -i $(GTAGS_ARGS) "$$here"
+cscope: cscope.files
+       test ! -s cscope.files \
+         || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files 
$(CSCOPE_ARGS)
+clean-cscope:
+       -rm -f cscope.files
+cscope.files: clean-cscope cscopelist
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+       list='$(am__tagged_files)'; \
+       case "$(srcdir)" in \
+         [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+         *) sdir=$(subdir)/$(srcdir) ;; \
+       esac; \
+       for i in $$list; do \
+         if test -f "$$i"; then \
+           echo "$(subdir)/$$i"; \
+         else \
+           echo "$$sdir/$$i"; \
+         fi; \
+       done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+       -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+       -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
+distdir: $(BUILT_SOURCES)
+       $(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+       $(am__remove_distdir)
+       test -d "$(distdir)" || mkdir "$(distdir)"
+       @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+       topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+       list='$(DISTFILES)'; \
+         dist_files=`for file in $$list; do echo $$file; done | \
+         sed -e "s|^$$srcdirstrip/||;t" \
+             -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+       case $$dist_files in \
+         */*) $(MKDIR_P) `echo "$$dist_files" | \
+                          sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+                          sort -u` ;; \
+       esac; \
+       for file in $$dist_files; do \
+         if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+         if test -d $$d/$$file; then \
+           dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+           if test -d "$(distdir)/$$file"; then \
+             find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx 
{} \;; \
+           fi; \
+           if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+             cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+             find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx 
{} \;; \
+           fi; \
+           cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+         else \
+           test -f "$(distdir)/$$file" \
+           || cp -p $$d/$$file "$(distdir)/$$file" \
+           || exit 1; \
+         fi; \
+       done
+       @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+         if test "$$subdir" = .; then :; else \
+           $(am__make_dryrun) \
+             || test -d "$(distdir)/$$subdir" \
+             || $(MKDIR_P) "$(distdir)/$$subdir" \
+             || exit 1; \
+           dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+           $(am__relativize); \
+           new_distdir=$$reldir; \
+           dir1=$$subdir; dir2="$(top_distdir)"; \
+           $(am__relativize); \
+           new_top_distdir=$$reldir; \
+           echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) 
top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+           echo "     am__remove_distdir=: am__skip_length_check=: 
am__skip_mode_fix=: distdir)"; \
+           ($(am__cd) $$subdir && \
+             $(MAKE) $(AM_MAKEFLAGS) \
+               top_distdir="$$new_top_distdir" \
+               distdir="$$new_distdir" \
+               am__remove_distdir=: \
+               am__skip_length_check=: \
+               am__skip_mode_fix=: \
+               distdir) \
+             || exit 1; \
+         fi; \
+       done
+       $(MAKE) $(AM_MAKEFLAGS) \
+         top_distdir="$(top_distdir)" distdir="$(distdir)" \
+         dist-hook
+       -test -n "$(am__skip_mode_fix)" \
+       || find "$(distdir)" -type d ! -perm -755 \
+               -exec chmod u+rwx,go+rx {} \; -o \
+         ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+         ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+         ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+       || chmod -R a+r "$(distdir)"
+dist-gzip: distdir
+       tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c 
>$(distdir).tar.gz
+       $(am__post_remove_distdir)
+
+dist-bzip2: distdir
+       tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c 
>$(distdir).tar.bz2
+       $(am__post_remove_distdir)
+dist-lzip: distdir
+       tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} 
>$(distdir).tar.lz
+       $(am__post_remove_distdir)
+dist-xz: distdir
+       tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c 
>$(distdir).tar.xz
+       $(am__post_remove_distdir)
+
+dist-zstd: distdir
+       tardir=$(distdir) && $(am__tar) | zstd -c 
$${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
+       $(am__post_remove_distdir)
+
+dist-tarZ: distdir
+       @echo WARNING: "Support for distribution archives compressed with" \
+                      "legacy program 'compress' is deprecated." >&2
+       @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+       tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+       $(am__post_remove_distdir)
+
+dist-shar: distdir
+       @echo WARNING: "Support for shar distribution archives is" \
+                      "deprecated." >&2
+       @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+       shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
+       $(am__post_remove_distdir)
+
+dist-zip: distdir
+       -rm -f $(distdir).zip
+       zip -rq $(distdir).zip $(distdir)
+       $(am__post_remove_distdir)
+
+dist dist-all:
+       $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
+       $(am__post_remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+       case '$(DIST_ARCHIVES)' in \
+       *.tar.gz*) \
+         eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
+       *.tar.bz2*) \
+         bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+       *.tar.lz*) \
+         lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
+       *.tar.xz*) \
+         xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+       *.tar.Z*) \
+         uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+       *.shar.gz*) \
+         eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
+       *.zip*) \
+         unzip $(distdir).zip ;;\
+       *.tar.zst*) \
+         zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
+       esac
+       chmod -R a-w $(distdir)
+       chmod u+w $(distdir)
+       mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
+       chmod a-w $(distdir)
+       test -d $(distdir)/_build || exit 0; \
+       dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 
's,^[^:\\/]:[\\/],/,'` \
+         && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+         && am__cwd=`pwd` \
+         && $(am__cd) $(distdir)/_build/sub \
+         && ../../configure \
+           $(AM_DISTCHECK_CONFIGURE_FLAGS) \
+           $(DISTCHECK_CONFIGURE_FLAGS) \
+           --srcdir=../.. --prefix="$$dc_install_base" \
+         && $(MAKE) $(AM_MAKEFLAGS) \
+         && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \
+         && $(MAKE) $(AM_MAKEFLAGS) check \
+         && $(MAKE) $(AM_MAKEFLAGS) install \
+         && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+         && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+         && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" 
\
+               distuninstallcheck \
+         && chmod -R a-w "$$dc_install_base" \
+         && ({ \
+              (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+              && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+              && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+              && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+                   distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+             } || { rm -rf "$$dc_destdir"; exit 1; }) \
+         && rm -rf "$$dc_destdir" \
+         && $(MAKE) $(AM_MAKEFLAGS) dist \
+         && rm -rf $(DIST_ARCHIVES) \
+         && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+         && cd "$$am__cwd" \
+         || exit 1
+       $(am__post_remove_distdir)
+       @(echo "$(distdir) archives ready for distribution: "; \
+         list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+         sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+       @test -n '$(distuninstallcheck_dir)' || { \
+         echo 'ERROR: trying to run $@ with an empty' \
+              '$$(distuninstallcheck_dir)' >&2; \
+         exit 1; \
+       }; \
+       $(am__cd) '$(distuninstallcheck_dir)' || { \
+         echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
+         exit 1; \
+       }; \
+       test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
+          || { echo "ERROR: files left after uninstall:" ; \
+               if test -n "$(DESTDIR)"; then \
+                 echo "  (check DESTDIR support)"; \
+               fi ; \
+               $(distuninstallcheck_listfiles) ; \
+               exit 1; } >&2
+distcleancheck: distclean
+       @if test '$(srcdir)' = . ; then \
+         echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+         exit 1 ; \
+       fi
+       @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+         || { echo "ERROR: files left in build directory after distclean:" ; \
+              $(distcleancheck_listfiles) ; \
+              exit 1; } >&2
+check-am: all-am
+       $(MAKE) $(AM_MAKEFLAGS) check-local
+check: $(BUILT_SOURCES)
+       $(MAKE) $(AM_MAKEFLAGS) check-recursive
+all-am: Makefile $(PROGRAMS) $(SCRIPTS) $(HEADERS) config.h
+installdirs: installdirs-recursive
+installdirs-am:
+       for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" 
"$(DESTDIR)$(includedir)"; do \
+         test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+       done
+install: $(BUILT_SOURCES)
+       $(MAKE) $(AM_MAKEFLAGS) install-recursive
+install-exec: $(BUILT_SOURCES)
+       $(MAKE) $(AM_MAKEFLAGS) install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+       @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+       if test -z '$(STRIP)'; then \
+         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s 
\
+             install; \
+       else \
+         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s 
\
+           "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+       fi
+mostlyclean-generic:
+
+clean-generic:
+       -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+       -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+       -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f 
$(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+       @echo "This command is intended for maintainers to use"
+       @echo "it deletes files that may require special tools to rebuild."
+       -rm -f awkgram.c
+       -rm -f command.c
+       -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+clean: clean-recursive
+
+clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
+
+distclean: distclean-recursive
+       -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+               -rm -f ./$(DEPDIR)/array.Po
+       -rm -f ./$(DEPDIR)/awkgram.Po
+       -rm -f ./$(DEPDIR)/builtin.Po
+       -rm -f ./$(DEPDIR)/cint_array.Po
+       -rm -f ./$(DEPDIR)/command.Po
+       -rm -f ./$(DEPDIR)/debug.Po
+       -rm -f ./$(DEPDIR)/eval.Po
+       -rm -f ./$(DEPDIR)/ext.Po
+       -rm -f ./$(DEPDIR)/field.Po
+       -rm -f ./$(DEPDIR)/floatcomp.Po
+       -rm -f ./$(DEPDIR)/gawkapi.Po
+       -rm -f ./$(DEPDIR)/gawkmisc.Po
+       -rm -f ./$(DEPDIR)/int_array.Po
+       -rm -f ./$(DEPDIR)/io.Po
+       -rm -f ./$(DEPDIR)/main.Po
+       -rm -f ./$(DEPDIR)/mpfr.Po
+       -rm -f ./$(DEPDIR)/msg.Po
+       -rm -f ./$(DEPDIR)/node.Po
+       -rm -f ./$(DEPDIR)/profile.Po
+       -rm -f ./$(DEPDIR)/re.Po
+       -rm -f ./$(DEPDIR)/replace.Po
+       -rm -f ./$(DEPDIR)/str_array.Po
+       -rm -f ./$(DEPDIR)/symbol.Po
+       -rm -f ./$(DEPDIR)/version.Po
+       -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+       distclean-hdr distclean-local distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am: install-includeHEADERS
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS install-binSCRIPTS
+       @$(NORMAL_INSTALL)
+       $(MAKE) $(AM_MAKEFLAGS) install-exec-hook
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+       -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+       -rm -rf $(top_srcdir)/autom4te.cache
+               -rm -f ./$(DEPDIR)/array.Po
+       -rm -f ./$(DEPDIR)/awkgram.Po
+       -rm -f ./$(DEPDIR)/builtin.Po
+       -rm -f ./$(DEPDIR)/cint_array.Po
+       -rm -f ./$(DEPDIR)/command.Po
+       -rm -f ./$(DEPDIR)/debug.Po
+       -rm -f ./$(DEPDIR)/eval.Po
+       -rm -f ./$(DEPDIR)/ext.Po
+       -rm -f ./$(DEPDIR)/field.Po
+       -rm -f ./$(DEPDIR)/floatcomp.Po
+       -rm -f ./$(DEPDIR)/gawkapi.Po
+       -rm -f ./$(DEPDIR)/gawkmisc.Po
+       -rm -f ./$(DEPDIR)/int_array.Po
+       -rm -f ./$(DEPDIR)/io.Po
+       -rm -f ./$(DEPDIR)/main.Po
+       -rm -f ./$(DEPDIR)/mpfr.Po
+       -rm -f ./$(DEPDIR)/msg.Po
+       -rm -f ./$(DEPDIR)/node.Po
+       -rm -f ./$(DEPDIR)/profile.Po
+       -rm -f ./$(DEPDIR)/re.Po
+       -rm -f ./$(DEPDIR)/replace.Po
+       -rm -f ./$(DEPDIR)/str_array.Po
+       -rm -f ./$(DEPDIR)/symbol.Po
+       -rm -f ./$(DEPDIR)/version.Po
+       -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS \
+       uninstall-includeHEADERS
+
+.MAKE: $(am__recursive_targets) all check check-am install install-am \
+       install-exec install-exec-am install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
+       am--depfiles am--refresh check check-am check-local clean \
+       clean-binPROGRAMS clean-cscope clean-generic cscope \
+       cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
+       dist-gzip dist-hook dist-lzip dist-shar dist-tarZ dist-xz \
+       dist-zip dist-zstd distcheck distclean distclean-compile \
+       distclean-generic distclean-hdr distclean-local distclean-tags \
+       distcleancheck distdir distuninstallcheck dvi dvi-am html \
+       html-am info info-am install install-am install-binPROGRAMS \
+       install-binSCRIPTS install-data install-data-am install-dvi \
+       install-dvi-am install-exec install-exec-am install-exec-hook \
+       install-html install-html-am install-includeHEADERS \
+       install-info install-info-am install-man install-pdf \
+       install-pdf-am install-ps install-ps-am install-strip \
+       installcheck installcheck-am installdirs installdirs-am \
+       maintainer-clean maintainer-clean-generic mostlyclean \
+       mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
+       tags tags-am uninstall uninstall-am uninstall-binPROGRAMS \
+       uninstall-binSCRIPTS uninstall-includeHEADERS
+
+.PRECIOUS: Makefile
+
+
+# First, add a link from gawk to gawk-X.Y.Z.
+#
+# For GNU systems where gawk is awk, add a link to awk.
+# (This is done universally, which may not always be right, but
+# there's no easy way to distinguish GNU from non-GNU systems.)
+#
+# Use the transform, in case --program-prefix=XXX
+install-exec-hook:
+       (cd $(DESTDIR)$(bindir); \
+       name=`echo gawk | sed '$(transform)'` ; \
+       $(LN) $${name}$(EXEEXT) gawk-$(VERSION)$(EXEEXT) 2>/dev/null ; \
+       if [ ! -f awk$(EXEEXT) ]; \
+       then    $(LN_S) $${name}$(EXEEXT) awk$(EXEEXT); \
+       fi; exit 0)
+
+# Undo the above when uninstalling
+uninstall-links:
+       (cd $(DESTDIR)$(bindir); \
+       name=`echo gawk | sed '$(transform)'` ; \
+       if [ -f awk$(EXEEXT) ] && cmp awk$(EXEEXT) $${name}$(EXEEXT) > 
/dev/null; then rm -f awk$(EXEEXT); fi ; \
+       rm -f gawk-$(VERSION)$(EXEEXT); exit 0)
+
+uninstall-recursive: uninstall-links
+
+# force there to be a gawk executable before running tests
+check-local: gawk$(EXEEXT)
+
+# A little extra clean up when making distributions.
+dist-hook:
+       cd "$(distdir)"/extension ; rm -f *.o *.so
+       cd "$(srcdir)"/pc ; \
+       chmod u+w config.h ; \
+       sed -n -f configpk.sed < ../configure.ac > /tmp/tmp.sed ; \
+       sed -f config.sed < ../configh.in > /tmp/config.tmp ; \
+       sed -f /tmp/tmp.sed < /tmp/config.tmp > config.h ; \
+       $(RM) /tmp/tmp.sed /tmp/config.tmp
+       pwd
+       chmod u+w "$(distdir)"/pc/config.h
+       cp "$(srcdir)"/pc/config.h "$(distdir)"/pc/config.h
+
+# Special rules for individual files
+
+$(srcdir)/awkgram.c: awkgram.y
+       $(YACC) -o $@ $(AM_YFLAGS) $(YFLAGS) $<
+       sed 's/parse error/syntax error/g' < $@ > $@.tmp && mv $@.tmp $@
+
+$(srcdir)/command.c: command.y
+       $(YACC) -o $@ -p zz $<
+       sed 's/parse error/syntax error/g' < $@ > $@.tmp && mv $@.tmp $@
+
+$(srcdir)/pc/Makefile.tst: test/Makefile.in pc/Makefile.tst.prologue 
pc/GenMakefileTst.awk
+       $(AM_V_GEN)$(MKDIR_P) "$(srcdir)"/pc && \
+       cat "$(srcdir)"/pc/Makefile.tst.prologue > "$(srcdir)"/pc/Makefile.tst 
&& \
+       $(AWK) -f "$(srcdir)"/pc/GenMakefileTst.awk 
"$(srcdir)"/test/Makefile.in >> "$(srcdir)"/pc/Makefile.tst
+
+# This is for my development & testing.
+efence: gawk
+       $(CC) $(AM_LDFLAGS) -o gawk $$(ls *.o | grep -v '_p.o$$') $(LDADD) 
$(LIBS) -lefence
+
+diffout valgrind-scan zos-diffout:
+       @cd test && $(MAKE) $(AM_MAKEFLAGS) $@
+
+valgrind:
+       cd test; rm -f log.[0-9]*; \
+       make check VALGRIND="valgrind --leak-check=full --log-file=log.%p"; \
+       make valgrind-scan
+
+valgrind-noleak:
+       cd test; rm -f log.[0-9]*; \
+       make check VALGRIND="valgrind --leak-check=no --log-file=log.%p"; \
+       make valgrind-scan
+
+spell:
+       cd "$(srcdir)"/doc ; $(MAKE) spell
+
+distclean-local:
+       rm -fr .deps
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/test/mdim4.ok b/test/mdim4.ok
new file mode 100644
index 00000000..bb7c8d88
--- /dev/null
+++ b/test/mdim4.ok
@@ -0,0 +1,1373 @@
+# Makefile.in generated by automake 1.16.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2021 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+#
+# Makefile.am --- automake input file for gawk
+#
+# Copyright (C) 2000-2021 the Free Software Foundation, Inc.
+#
+# This file is part of GAWK, the GNU implementation of the
+# AWK Programming Language.
+#
+# GAWK is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# GAWK is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, 
USA
+#
+
+
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \  ]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs  ]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgincludedir = $(includedir)/gawk
+pkglibdir = $(libdir)/gawk
+pkglibexecdir = $(libexecdir)/gawk
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = x86_64-pc-linux-gnu
+host_triplet = x86_64-pc-linux-gnu
+
+# Build in extension before test so that
+#      ./configure && make check
+# works properly too.
+am__append_1 = extension
+bin_PROGRAMS = gawk$(EXEEXT)
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/arch.m4 \
+       $(top_srcdir)/m4/codeset.m4 $(top_srcdir)/m4/gettext.m4 \
+       $(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \
+       $(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lcmessage.m4 \
+       $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
+       $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libsigsegv.m4 \
+       $(top_srcdir)/m4/longlong.m4 $(top_srcdir)/m4/mpfr.m4 \
+       $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/noreturn.m4 \
+       $(top_srcdir)/m4/pma.m4 $(top_srcdir)/m4/po.m4 \
+       $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/readline.m4 \
+       $(top_srcdir)/m4/socket.m4 \
+       $(top_srcdir)/m4/triplet-transformation.m4 \
+       $(top_srcdir)/m4/ulonglong.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+       $(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
+       $(am__configure_deps) $(include_HEADERS) $(am__DIST_COMMON)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES = gawkbug
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" \
+       "$(DESTDIR)$(includedir)"
+PROGRAMS = $(bin_PROGRAMS)
+am__objects_1 = array.$(OBJEXT) awkgram.$(OBJEXT) builtin.$(OBJEXT) \
+       cint_array.$(OBJEXT) command.$(OBJEXT) debug.$(OBJEXT) \
+       eval.$(OBJEXT) ext.$(OBJEXT) field.$(OBJEXT) \
+       floatcomp.$(OBJEXT) gawkapi.$(OBJEXT) gawkmisc.$(OBJEXT) \
+       int_array.$(OBJEXT) io.$(OBJEXT) main.$(OBJEXT) mpfr.$(OBJEXT) \
+       msg.$(OBJEXT) node.$(OBJEXT) profile.$(OBJEXT) re.$(OBJEXT) \
+       replace.$(OBJEXT) str_array.$(OBJEXT) symbol.$(OBJEXT) \
+       version.$(OBJEXT)
+am_gawk_OBJECTS = $(am__objects_1)
+gawk_OBJECTS = $(am_gawk_OBJECTS)
+gawk_LDADD = $(LDADD)
+am__DEPENDENCIES_1 =
+gawk_DEPENDENCIES = support/libsupport.a $(am__DEPENDENCIES_1) \
+       $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
+       $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
+       $(am__DEPENDENCIES_1)
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+SCRIPTS = $(bin_SCRIPTS)
+AM_V_P = $(am__v_P_$(V))
+am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_$(V))
+am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_$(V))
+am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = -I.
+depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
+am__maybe_remake_depfiles = depfiles
+am__depfiles_remade = ./$(DEPDIR)/array.Po ./$(DEPDIR)/awkgram.Po \
+       ./$(DEPDIR)/builtin.Po ./$(DEPDIR)/cint_array.Po \
+       ./$(DEPDIR)/command.Po ./$(DEPDIR)/debug.Po \
+       ./$(DEPDIR)/eval.Po ./$(DEPDIR)/ext.Po ./$(DEPDIR)/field.Po \
+       ./$(DEPDIR)/floatcomp.Po ./$(DEPDIR)/gawkapi.Po \
+       ./$(DEPDIR)/gawkmisc.Po ./$(DEPDIR)/int_array.Po \
+       ./$(DEPDIR)/io.Po ./$(DEPDIR)/main.Po ./$(DEPDIR)/mpfr.Po \
+       ./$(DEPDIR)/msg.Po ./$(DEPDIR)/node.Po ./$(DEPDIR)/profile.Po \
+       ./$(DEPDIR)/re.Po ./$(DEPDIR)/replace.Po \
+       ./$(DEPDIR)/str_array.Po ./$(DEPDIR)/symbol.Po \
+       ./$(DEPDIR)/version.Po
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+       $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_$(V))
+am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY))
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_$(V))
+am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY))
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+am__yacc_c2h = sed -e s/cc$$/hh/ -e s/cpp$$/hpp/ -e s/cxx$$/hxx/ \
+                  -e s/c++$$/h++/ -e s/c$$/h/
+YACCCOMPILE = $(YACC) $(AM_YFLAGS) $(YFLAGS)
+AM_V_YACC = $(am__v_YACC_$(V))
+am__v_YACC_ = $(am__v_YACC_$(AM_DEFAULT_VERBOSITY))
+am__v_YACC_0 = @echo "  YACC    " $@;
+am__v_YACC_1 = 
+YLWRAP = $(top_srcdir)/build-aux/ylwrap
+SOURCES = $(gawk_SOURCES)
+DIST_SOURCES = $(gawk_SOURCES)
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+       ctags-recursive dvi-recursive html-recursive info-recursive \
+       install-data-recursive install-dvi-recursive \
+       install-exec-recursive install-html-recursive \
+       install-info-recursive install-pdf-recursive \
+       install-ps-recursive install-recursive installcheck-recursive \
+       installdirs-recursive pdf-recursive ps-recursive \
+       tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+HEADERS = $(include_HEADERS)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive        \
+  distclean-recursive maintainer-clean-recursive
+am__recursive_targets = \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+       cscope distdir distdir-am dist dist-all distcheck
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \
+       configh.in
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+DIST_SUBDIRS = support . extension extras doc awklib po test
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/configh.in \
+       $(srcdir)/gawkbug.in $(top_srcdir)/build-aux/ar-lib \
+       $(top_srcdir)/build-aux/compile \
+       $(top_srcdir)/build-aux/config.guess \
+       $(top_srcdir)/build-aux/config.rpath \
+       $(top_srcdir)/build-aux/config.sub \
+       $(top_srcdir)/build-aux/depcomp \
+       $(top_srcdir)/build-aux/install-sh \
+       $(top_srcdir)/build-aux/missing $(top_srcdir)/build-aux/ylwrap \
+       ABOUT-NLS AUTHORS COPYING ChangeLog INSTALL NEWS README TODO \
+       awkgram.c build-aux/ChangeLog build-aux/ar-lib \
+       build-aux/compile build-aux/config.guess \
+       build-aux/config.rpath build-aux/config.sub build-aux/depcomp \
+       build-aux/install-sh build-aux/ltmain.sh build-aux/missing \
+       build-aux/texinfo.tex build-aux/ylwrap command.c
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+  if test -d "$(distdir)"; then \
+    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+      && rm -rf "$(distdir)" \
+      || { sleep 5 && rm -rf "$(distdir)"; }; \
+  else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
+DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.lz $(distdir).tar.xz
+GZIP_ENV = --best
+DIST_TARGETS = dist-lzip dist-xz dist-gzip
+# Exists only to be overridden by the user if desired.
+AM_DISTCHECK_DVI_TARGET = dvi
+distuninstallcheck_listfiles = find . -type f -print
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
+  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
+distcleancheck_listfiles = find . -type f -print
+
+# Directory for gawk's data files. Automake supplies datadir.
+pkgdatadir = $(datadir)/awk
+ACLOCAL = ${SHELL} '/home/arnold/Gnu/gawk/gawk.git/build-aux/missing' 
aclocal-1.16
+AMTAR = $${TAR-tar}
+AM_DEFAULT_VERBOSITY = 1
+AR = ar
+AUTOCONF = ${SHELL} '/home/arnold/Gnu/gawk/gawk.git/build-aux/missing' autoconf
+AUTOHEADER = ${SHELL} '/home/arnold/Gnu/gawk/gawk.git/build-aux/missing' 
autoheader
+AUTOMAKE = ${SHELL} '/home/arnold/Gnu/gawk/gawk.git/build-aux/missing' 
automake-1.16
+AWK = gawk
+CC = gcc
+CCDEPMODE = depmode=gcc3
+CFLAGS = -g -O2 -DARRAYDEBUG -DYYDEBUG -DLOCALEDEBUG -DMEMDEBUG -Wall 
-fno-builtin -g3 -ggdb3
+CPP = gcc -E
+CPPFLAGS = 
+CSCOPE = cscope
+CTAGS = ctags
+CYGPATH_W = echo
+DEFS = -DDEFPATH=$(DEFPATH) -DDEFLIBPATH=$(DEFLIBPATH) -DSHLIBEXT=$(SHLIBEXT) 
-DHAVE_CONFIG_H -DGAWK -DLOCALEDIR='"$(datadir)/locale"' -I"$(srcdir)/support"
+DEPDIR = .deps
+ECHO_C = 
+ECHO_N = -n
+ECHO_T = 
+EGREP = /bin/grep -E
+ETAGS = etags
+EXEEXT = 
+GAWKLIBEXT = so
+GETTEXT_MACRO_VERSION = 0.20
+GMSGFMT = /usr/local/bin/msgfmt
+GMSGFMT_015 = /usr/local/bin/msgfmt
+GREP = /bin/grep
+HAVE_LIBSIGSEGV = no
+INSTALL = @INSTALL@
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
+INTLLIBS = 
+INTL_MACOSX_LIBS = 
+LDFLAGS =  -no-pie
+LIBICONV = -liconv
+LIBINTL = 
+LIBMPFR = -lmpfr -lgmp
+LIBOBJS = 
+LIBREADLINE = -lreadline
+LIBS = -ldl -lm 
+LIBSIGSEGV = 
+LIBSIGSEGV_PREFIX = 
+LN_S = ln -s
+LTLIBICONV = -liconv
+LTLIBINTL = 
+LTLIBOBJS = 
+LTLIBSIGSEGV = 
+MAKEINFO = ${SHELL} '/home/arnold/Gnu/gawk/gawk.git/build-aux/missing' makeinfo
+MKDIR_P = /bin/mkdir -p
+MSGFMT = /usr/local/bin/msgfmt
+MSGMERGE = /usr/local/bin/msgmerge
+MSGMERGE_FOR_MSGFMT_OPTION = --for-msgfmt
+OBJEXT = o
+PACKAGE = gawk
+PACKAGE_BUGREPORT = bug-gawk@gnu.org
+PACKAGE_NAME = GNU Awk
+PACKAGE_STRING = GNU Awk 5.1.60
+PACKAGE_TARNAME = gawk
+PACKAGE_URL = https://www.gnu.org/software/gawk/
+PACKAGE_VERSION = 5.1.60
+PATH_SEPARATOR = :
+POSUB = po
+RANLIB = ranlib
+SED = /bin/sed
+SET_MAKE = 
+SHELL = /bin/bash
+SOCKET_LIBS = 
+STRIP = 
+USE_NLS = yes
+VERSION = 5.1.60
+XGETTEXT = /usr/local/bin/xgettext
+XGETTEXT_015 = /usr/local/bin/xgettext
+XGETTEXT_EXTRA_OPTIONS = 
+YACC = bison -y
+YFLAGS = 
+ZOS_FAIL = 
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = ar
+ac_ct_CC = gcc
+acl_shlibext = so
+am__include = include
+am__leading_dot = .
+am__quote = 
+am__tar = $${TAR-tar} chof - "$$tardir"
+am__untar = $${TAR-tar} xf -
+bindir = ${exec_prefix}/bin
+build = x86_64-pc-linux-gnu
+build_alias = 
+build_cpu = x86_64
+build_os = linux-gnu
+build_vendor = pc
+builddir = @builddir@
+datadir = ${datarootdir}
+datarootdir = ${prefix}/share
+docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
+dvidir = ${docdir}
+exec_prefix = ${prefix}
+host = x86_64-pc-linux-gnu
+host_alias = 
+host_cpu = x86_64
+host_os = linux-gnu
+host_vendor = pc
+htmldir = ${docdir}
+includedir = ${prefix}/include
+infodir = ${datarootdir}/info
+install_sh = ${SHELL} /home/arnold/Gnu/gawk/gawk.git/build-aux/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localedir = ${datarootdir}/locale
+localstatedir = ${prefix}/var
+mandir = ${datarootdir}/man
+mkdir_p = $(MKDIR_P)
+oldincludedir = /usr/include
+pdfdir = ${docdir}
+pkgextensiondir = ${pkglibdir}
+prefix = /usr/local
+program_transform_name = s,x,x,
+psdir = ${docdir}
+runstatedir = ${localstatedir}/run
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+srcdir = @srcdir@
+subdirs =  extension
+sysconfdir = ${prefix}/etc
+target_alias = 
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+
+# This variable insures that aclocal runs
+# correctly after changing configure.ac
+ACLOCAL_AMFLAGS = -I m4
+AM_CFLAGS = -g -O2 -DARRAYDEBUG -DYYDEBUG -DLOCALEDEBUG -DMEMDEBUG -Wall 
-fno-builtin -g3 -ggdb3
+AM_LDFLAGS =  -no-pie
+
+# Stuff to include in the dist that doesn't need it's own
+# Makefile.am files
+EXTRA_DIST = \
+       ChangeLog.0 \
+       ChangeLog.1 \
+       COPYING \
+       INSTALL \
+       NEWS \
+       NEWS.0 \
+       NEWS.1 \
+       POSIX.STD \
+       README_d \
+       m4 \
+       missing_d \
+       po/README \
+       pc \
+       posix \
+       vms
+
+
+# The order to do things in.
+#
+# Build in support first, since we need the support library.
+#
+# Build explicitly in "." in order to build gawk first, so
+# that `make check' without a prior `make' works.
+
+# Build in awklib after in doc, since we want to extract
+# sample files if doc/gawk.texi changed.
+SUBDIRS = support . $(am__append_1) extras doc awklib po test
+bin_SCRIPTS = gawkbug
+include_HEADERS = gawkapi.h
+BUILT_SOURCES = $(srcdir)/pc/Makefile.tst
+
+# sources for gawk
+base_sources = \
+       array.c \
+       awk.h \
+       awkgram.y \
+       builtin.c \
+       cint_array.c \
+       cmd.h \
+       command.y \
+       custom.h \
+       debug.c \
+       eval.c \
+       ext.c \
+       field.c \
+       floatcomp.c \
+       floatmagic.h \
+       gawkapi.c \
+       gawkapi.h \
+       gawkmisc.c \
+       gettext.h \
+       int_array.c \
+       interpret.h \
+       io.c \
+       mbsupport.h \
+       main.c \
+       mpfr.c \
+       msg.c \
+       node.c \
+       nonposix.h \
+       profile.c \
+       protos.h \
+       re.c \
+       replace.c \
+       str_array.c \
+       symbol.c \
+       version.c
+
+gawk_SOURCES = $(base_sources)
+
+# Get extra libs as needed, Automake will supply LIBINTL and SOCKET_LIBS.
+LDADD = support/libsupport.a \
+       $(LIBSIGSEGV) $(LIBINTL) $(SOCKET_LIBS) $(LIBREADLINE) $(LIBMPFR) \
+       $(LDFLAGS)
+
+
+# stuff for compiling gawk/pgawk
+DEFPATH = '".$(PATH_SEPARATOR)$(pkgdatadir)"'
+
+# shared library support:
+SHLIBEXT = "\"$(GAWKLIBEXT)"\"
+DEFLIBPATH = "\"$(pkgextensiondir)\""
+
+# Get rid of core files when cleaning
+CLEANFILES = core core.* $(bin_SCRIPTS)
+
+# We want hard links for install-exec-hook, below
+LN = ln
+
+# Make copies...
+CP = cp
+
+# For some make's, e.g. OpenBSD, that don't define this
+RM = rm -f
+all: $(BUILT_SOURCES) config.h
+       $(MAKE) $(AM_MAKEFLAGS) all-recursive
+
+.SUFFIXES:
+.SUFFIXES: .c .o .obj .y
+am--refresh: Makefile
+       @:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+       @for dep in $?; do \
+         case '$(am__configure_deps)' in \
+           *$$dep*) \
+             echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
+             $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
+               && exit 0; \
+             exit 1;; \
+         esac; \
+       done; \
+       echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
+       $(am__cd) $(top_srcdir) && \
+         $(AUTOMAKE) --gnu Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+       @case '$?' in \
+         *config.status*) \
+           echo ' $(SHELL) ./config.status'; \
+           $(SHELL) ./config.status;; \
+         *) \
+           echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ 
$(am__maybe_remake_depfiles)'; \
+           cd $(top_builddir) && $(SHELL) ./config.status $@ 
$(am__maybe_remake_depfiles);; \
+       esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure 
$(CONFIG_STATUS_DEPENDENCIES)
+       $(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+       $(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+       $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+
+config.h: stamp-h1
+       @test -f $@ || rm -f stamp-h1
+       @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
+
+stamp-h1: $(srcdir)/configh.in $(top_builddir)/config.status
+       @rm -f stamp-h1
+       cd $(top_builddir) && $(SHELL) ./config.status config.h
+$(srcdir)/configh.in:  $(am__configure_deps) 
+       ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
+       rm -f stamp-h1
+       touch $@
+
+distclean-hdr:
+       -rm -f config.h stamp-h1
+gawkbug: $(top_builddir)/config.status $(srcdir)/gawkbug.in
+       cd $(top_builddir) && $(SHELL) ./config.status $@
+install-binPROGRAMS: $(bin_PROGRAMS)
+       @$(NORMAL_INSTALL)
+       @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+       if test -n "$$list"; then \
+         echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+         $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+       fi; \
+       for p in $$list; do echo "$$p $$p"; done | \
+       sed 's/$(EXEEXT)$$//' | \
+       while read p p1; do if test -f $$p \
+         ; then echo "$$p"; echo "$$p"; else :; fi; \
+       done | \
+       sed -e 'p;s,.*/,,;n;h' \
+           -e 's|.*|.|' \
+           -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+       sed 'N;N;N;s,\n, ,g' | \
+       $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+         { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+           if ($$2 == $$4) files[d] = files[d] " " $$1; \
+           else { print "f", $$3 "/" $$4, $$1; } } \
+         END { for (d in files) print "f", d, files[d] }' | \
+       while read type dir files; do \
+           if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+           test -z "$$files" || { \
+             echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files 
'$(DESTDIR)$(bindir)$$dir'"; \
+             $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files 
"$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+           } \
+       ; done
+
+uninstall-binPROGRAMS:
+       @$(NORMAL_UNINSTALL)
+       @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+       files=`for p in $$list; do echo "$$p"; done | \
+         sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+             -e 's/$$/$(EXEEXT)/' \
+       `; \
+       test -n "$$list" || exit 0; \
+       echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+       cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+       -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+
+gawk$(EXEEXT): $(gawk_OBJECTS) $(gawk_DEPENDENCIES) $(EXTRA_gawk_DEPENDENCIES) 
+       @rm -f gawk$(EXEEXT)
+       $(AM_V_CCLD)$(LINK) $(gawk_OBJECTS) $(gawk_LDADD) $(LIBS)
+install-binSCRIPTS: $(bin_SCRIPTS)
+       @$(NORMAL_INSTALL)
+       @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
+       if test -n "$$list"; then \
+         echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+         $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+       fi; \
+       for p in $$list; do \
+         if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+         if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
+       done | \
+       sed -e 'p;s,.*/,,;n' \
+           -e 'h;s|.*|.|' \
+           -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
+       $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
+         { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+           if ($$2 == $$4) { files[d] = files[d] " " $$1; \
+             if (++n[d] == $(am__install_max)) { \
+               print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
+           else { print "f", d "/" $$4, $$1 } } \
+         END { for (d in files) print "f", d, files[d] }' | \
+       while read type dir files; do \
+            if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+            test -z "$$files" || { \
+              echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+              $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit 
$$?; \
+            } \
+       ; done
+
+uninstall-binSCRIPTS:
+       @$(NORMAL_UNINSTALL)
+       @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
+       files=`for p in $$list; do echo "$$p"; done | \
+              sed -e 's,.*/,,;$(transform)'`; \
+       dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir)
+
+mostlyclean-compile:
+       -rm -f *.$(OBJEXT)
+
+distclean-compile:
+       -rm -f *.tab.c
+
+include ./$(DEPDIR)/array.Po # am--include-marker
+include ./$(DEPDIR)/awkgram.Po # am--include-marker
+include ./$(DEPDIR)/builtin.Po # am--include-marker
+include ./$(DEPDIR)/cint_array.Po # am--include-marker
+include ./$(DEPDIR)/command.Po # am--include-marker
+include ./$(DEPDIR)/debug.Po # am--include-marker
+include ./$(DEPDIR)/eval.Po # am--include-marker
+include ./$(DEPDIR)/ext.Po # am--include-marker
+include ./$(DEPDIR)/field.Po # am--include-marker
+include ./$(DEPDIR)/floatcomp.Po # am--include-marker
+include ./$(DEPDIR)/gawkapi.Po # am--include-marker
+include ./$(DEPDIR)/gawkmisc.Po # am--include-marker
+include ./$(DEPDIR)/int_array.Po # am--include-marker
+include ./$(DEPDIR)/io.Po # am--include-marker
+include ./$(DEPDIR)/main.Po # am--include-marker
+include ./$(DEPDIR)/mpfr.Po # am--include-marker
+include ./$(DEPDIR)/msg.Po # am--include-marker
+include ./$(DEPDIR)/node.Po # am--include-marker
+include ./$(DEPDIR)/profile.Po # am--include-marker
+include ./$(DEPDIR)/re.Po # am--include-marker
+include ./$(DEPDIR)/replace.Po # am--include-marker
+include ./$(DEPDIR)/str_array.Po # am--include-marker
+include ./$(DEPDIR)/symbol.Po # am--include-marker
+include ./$(DEPDIR)/version.Po # am--include-marker
+
+$(am__depfiles_remade):
+       @$(MKDIR_P) $(@D)
+       @echo '# dummy' >$@-t && $(am__mv) $@-t $@
+
+am--depfiles: $(am__depfiles_remade)
+
+.c.o:
+       $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
+       $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
+       $(am__mv) $$depbase.Tpo $$depbase.Po
+#      $(AM_V_CC)source='$<' object='$@' libtool=no \
+#      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#      $(AM_V_CC_no)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+       $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
+       $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) 
'$<'` &&\
+       $(am__mv) $$depbase.Tpo $$depbase.Po
+#      $(AM_V_CC)source='$<' object='$@' libtool=no \
+#      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#      $(AM_V_CC_no)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.y.c:
+       $(AM_V_YACC)$(am__skipyacc) $(SHELL) $(YLWRAP) $< y.tab.c $@ y.tab.h 
`echo $@ | $(am__yacc_c2h)` y.output $*.output -- $(YACCCOMPILE)
+install-includeHEADERS: $(include_HEADERS)
+       @$(NORMAL_INSTALL)
+       @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
+       if test -n "$$list"; then \
+         echo " $(MKDIR_P) '$(DESTDIR)$(includedir)'"; \
+         $(MKDIR_P) "$(DESTDIR)$(includedir)" || exit 1; \
+       fi; \
+       for p in $$list; do \
+         if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+         echo "$$d$$p"; \
+       done | $(am__base_list) | \
+       while read files; do \
+         echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \
+         $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \
+       done
+
+uninstall-includeHEADERS:
+       @$(NORMAL_UNINSTALL)
+       @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
+       files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+       dir='$(DESTDIR)$(includedir)'; $(am__uninstall_files_from_dir)
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+#     (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+       @fail=; \
+       if $(am__make_keepgoing); then \
+         failcom='fail=yes'; \
+       else \
+         failcom='exit 1'; \
+       fi; \
+       dot_seen=no; \
+       target=`echo $@ | sed s/-recursive//`; \
+       case "$@" in \
+         distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+         *) list='$(SUBDIRS)' ;; \
+       esac; \
+       for subdir in $$list; do \
+         echo "Making $$target in $$subdir"; \
+         if test "$$subdir" = "."; then \
+           dot_seen=yes; \
+           local_target="$$target-am"; \
+         else \
+           local_target="$$target"; \
+         fi; \
+         ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+         || eval $$failcom; \
+       done; \
+       if test "$$dot_seen" = "no"; then \
+         $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+       fi; test -z "$$fail"
+
+ID: $(am__tagged_files)
+       $(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+       set x; \
+       here=`pwd`; \
+       if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+         include_option=--etags-include; \
+         empty_fix=.; \
+       else \
+         include_option=--include; \
+         empty_fix=; \
+       fi; \
+       list='$(SUBDIRS)'; for subdir in $$list; do \
+         if test "$$subdir" = .; then :; else \
+           test ! -f $$subdir/TAGS || \
+             set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+         fi; \
+       done; \
+       $(am__define_uniq_tagged_files); \
+       shift; \
+       if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+         test -n "$$unique" || unique=$$empty_fix; \
+         if test $$# -gt 0; then \
+           $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+             "$$@" $$unique; \
+         else \
+           $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+             $$unique; \
+         fi; \
+       fi
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+       $(am__define_uniq_tagged_files); \
+       test -z "$(CTAGS_ARGS)$$unique" \
+         || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+            $$unique
+
+GTAGS:
+       here=`$(am__cd) $(top_builddir) && pwd` \
+         && $(am__cd) $(top_srcdir) \
+         && gtags -i $(GTAGS_ARGS) "$$here"
+cscope: cscope.files
+       test ! -s cscope.files \
+         || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files 
$(CSCOPE_ARGS)
+clean-cscope:
+       -rm -f cscope.files
+cscope.files: clean-cscope cscopelist
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+       list='$(am__tagged_files)'; \
+       case "$(srcdir)" in \
+         [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+         *) sdir=$(subdir)/$(srcdir) ;; \
+       esac; \
+       for i in $$list; do \
+         if test -f "$$i"; then \
+           echo "$(subdir)/$$i"; \
+         else \
+           echo "$$sdir/$$i"; \
+         fi; \
+       done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+       -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+       -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
+distdir: $(BUILT_SOURCES)
+       $(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+       $(am__remove_distdir)
+       test -d "$(distdir)" || mkdir "$(distdir)"
+       @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+       topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+       list='$(DISTFILES)'; \
+         dist_files=`for file in $$list; do echo $$file; done | \
+         sed -e "s|^$$srcdirstrip/||;t" \
+             -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+       case $$dist_files in \
+         */*) $(MKDIR_P) `echo "$$dist_files" | \
+                          sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+                          sort -u` ;; \
+       esac; \
+       for file in $$dist_files; do \
+         if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+         if test -d $$d/$$file; then \
+           dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+           if test -d "$(distdir)/$$file"; then \
+             find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx 
{} \;; \
+           fi; \
+           if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+             cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+             find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx 
{} \;; \
+           fi; \
+           cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+         else \
+           test -f "$(distdir)/$$file" \
+           || cp -p $$d/$$file "$(distdir)/$$file" \
+           || exit 1; \
+         fi; \
+       done
+       @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+         if test "$$subdir" = .; then :; else \
+           $(am__make_dryrun) \
+             || test -d "$(distdir)/$$subdir" \
+             || $(MKDIR_P) "$(distdir)/$$subdir" \
+             || exit 1; \
+           dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+           $(am__relativize); \
+           new_distdir=$$reldir; \
+           dir1=$$subdir; dir2="$(top_distdir)"; \
+           $(am__relativize); \
+           new_top_distdir=$$reldir; \
+           echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) 
top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+           echo "     am__remove_distdir=: am__skip_length_check=: 
am__skip_mode_fix=: distdir)"; \
+           ($(am__cd) $$subdir && \
+             $(MAKE) $(AM_MAKEFLAGS) \
+               top_distdir="$$new_top_distdir" \
+               distdir="$$new_distdir" \
+               am__remove_distdir=: \
+               am__skip_length_check=: \
+               am__skip_mode_fix=: \
+               distdir) \
+             || exit 1; \
+         fi; \
+       done
+       $(MAKE) $(AM_MAKEFLAGS) \
+         top_distdir="$(top_distdir)" distdir="$(distdir)" \
+         dist-hook
+       -test -n "$(am__skip_mode_fix)" \
+       || find "$(distdir)" -type d ! -perm -755 \
+               -exec chmod u+rwx,go+rx {} \; -o \
+         ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+         ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+         ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+       || chmod -R a+r "$(distdir)"
+dist-gzip: distdir
+       tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c 
>$(distdir).tar.gz
+       $(am__post_remove_distdir)
+
+dist-bzip2: distdir
+       tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c 
>$(distdir).tar.bz2
+       $(am__post_remove_distdir)
+dist-lzip: distdir
+       tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} 
>$(distdir).tar.lz
+       $(am__post_remove_distdir)
+dist-xz: distdir
+       tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c 
>$(distdir).tar.xz
+       $(am__post_remove_distdir)
+
+dist-zstd: distdir
+       tardir=$(distdir) && $(am__tar) | zstd -c 
$${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
+       $(am__post_remove_distdir)
+
+dist-tarZ: distdir
+       @echo WARNING: "Support for distribution archives compressed with" \
+                      "legacy program 'compress' is deprecated." >&2
+       @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+       tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+       $(am__post_remove_distdir)
+
+dist-shar: distdir
+       @echo WARNING: "Support for shar distribution archives is" \
+                      "deprecated." >&2
+       @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+       shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
+       $(am__post_remove_distdir)
+
+dist-zip: distdir
+       -rm -f $(distdir).zip
+       zip -rq $(distdir).zip $(distdir)
+       $(am__post_remove_distdir)
+
+dist dist-all:
+       $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
+       $(am__post_remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+       case '$(DIST_ARCHIVES)' in \
+       *.tar.gz*) \
+         eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
+       *.tar.bz2*) \
+         bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+       *.tar.lz*) \
+         lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
+       *.tar.xz*) \
+         xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+       *.tar.Z*) \
+         uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+       *.shar.gz*) \
+         eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
+       *.zip*) \
+         unzip $(distdir).zip ;;\
+       *.tar.zst*) \
+         zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
+       esac
+       chmod -R a-w $(distdir)
+       chmod u+w $(distdir)
+       mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
+       chmod a-w $(distdir)
+       test -d $(distdir)/_build || exit 0; \
+       dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 
's,^[^:\\/]:[\\/],/,'` \
+         && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+         && am__cwd=`pwd` \
+         && $(am__cd) $(distdir)/_build/sub \
+         && ../../configure \
+           $(AM_DISTCHECK_CONFIGURE_FLAGS) \
+           $(DISTCHECK_CONFIGURE_FLAGS) \
+           --srcdir=../.. --prefix="$$dc_install_base" \
+         && $(MAKE) $(AM_MAKEFLAGS) \
+         && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \
+         && $(MAKE) $(AM_MAKEFLAGS) check \
+         && $(MAKE) $(AM_MAKEFLAGS) install \
+         && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+         && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+         && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" 
\
+               distuninstallcheck \
+         && chmod -R a-w "$$dc_install_base" \
+         && ({ \
+              (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+              && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+              && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+              && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+                   distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+             } || { rm -rf "$$dc_destdir"; exit 1; }) \
+         && rm -rf "$$dc_destdir" \
+         && $(MAKE) $(AM_MAKEFLAGS) dist \
+         && rm -rf $(DIST_ARCHIVES) \
+         && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+         && cd "$$am__cwd" \
+         || exit 1
+       $(am__post_remove_distdir)
+       @(echo "$(distdir) archives ready for distribution: "; \
+         list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+         sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+       @test -n '$(distuninstallcheck_dir)' || { \
+         echo 'ERROR: trying to run $@ with an empty' \
+              '$$(distuninstallcheck_dir)' >&2; \
+         exit 1; \
+       }; \
+       $(am__cd) '$(distuninstallcheck_dir)' || { \
+         echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
+         exit 1; \
+       }; \
+       test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
+          || { echo "ERROR: files left after uninstall:" ; \
+               if test -n "$(DESTDIR)"; then \
+                 echo "  (check DESTDIR support)"; \
+               fi ; \
+               $(distuninstallcheck_listfiles) ; \
+               exit 1; } >&2
+distcleancheck: distclean
+       @if test '$(srcdir)' = . ; then \
+         echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+         exit 1 ; \
+       fi
+       @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+         || { echo "ERROR: files left in build directory after distclean:" ; \
+              $(distcleancheck_listfiles) ; \
+              exit 1; } >&2
+check-am: all-am
+       $(MAKE) $(AM_MAKEFLAGS) check-local
+check: $(BUILT_SOURCES)
+       $(MAKE) $(AM_MAKEFLAGS) check-recursive
+all-am: Makefile $(PROGRAMS) $(SCRIPTS) $(HEADERS) config.h
+installdirs: installdirs-recursive
+installdirs-am:
+       for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" 
"$(DESTDIR)$(includedir)"; do \
+         test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+       done
+install: $(BUILT_SOURCES)
+       $(MAKE) $(AM_MAKEFLAGS) install-recursive
+install-exec: $(BUILT_SOURCES)
+       $(MAKE) $(AM_MAKEFLAGS) install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+       @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+       if test -z '$(STRIP)'; then \
+         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s 
\
+             install; \
+       else \
+         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s 
\
+           "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+       fi
+mostlyclean-generic:
+
+clean-generic:
+       -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+       -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+       -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f 
$(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+       @echo "This command is intended for maintainers to use"
+       @echo "it deletes files that may require special tools to rebuild."
+       -rm -f awkgram.c
+       -rm -f command.c
+       -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+clean: clean-recursive
+
+clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
+
+distclean: distclean-recursive
+       -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+               -rm -f ./$(DEPDIR)/array.Po
+       -rm -f ./$(DEPDIR)/awkgram.Po
+       -rm -f ./$(DEPDIR)/builtin.Po
+       -rm -f ./$(DEPDIR)/cint_array.Po
+       -rm -f ./$(DEPDIR)/command.Po
+       -rm -f ./$(DEPDIR)/debug.Po
+       -rm -f ./$(DEPDIR)/eval.Po
+       -rm -f ./$(DEPDIR)/ext.Po
+       -rm -f ./$(DEPDIR)/field.Po
+       -rm -f ./$(DEPDIR)/floatcomp.Po
+       -rm -f ./$(DEPDIR)/gawkapi.Po
+       -rm -f ./$(DEPDIR)/gawkmisc.Po
+       -rm -f ./$(DEPDIR)/int_array.Po
+       -rm -f ./$(DEPDIR)/io.Po
+       -rm -f ./$(DEPDIR)/main.Po
+       -rm -f ./$(DEPDIR)/mpfr.Po
+       -rm -f ./$(DEPDIR)/msg.Po
+       -rm -f ./$(DEPDIR)/node.Po
+       -rm -f ./$(DEPDIR)/profile.Po
+       -rm -f ./$(DEPDIR)/re.Po
+       -rm -f ./$(DEPDIR)/replace.Po
+       -rm -f ./$(DEPDIR)/str_array.Po
+       -rm -f ./$(DEPDIR)/symbol.Po
+       -rm -f ./$(DEPDIR)/version.Po
+       -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+       distclean-hdr distclean-local distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am: install-includeHEADERS
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS install-binSCRIPTS
+       @$(NORMAL_INSTALL)
+       $(MAKE) $(AM_MAKEFLAGS) install-exec-hook
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+       -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+       -rm -rf $(top_srcdir)/autom4te.cache
+               -rm -f ./$(DEPDIR)/array.Po
+       -rm -f ./$(DEPDIR)/awkgram.Po
+       -rm -f ./$(DEPDIR)/builtin.Po
+       -rm -f ./$(DEPDIR)/cint_array.Po
+       -rm -f ./$(DEPDIR)/command.Po
+       -rm -f ./$(DEPDIR)/debug.Po
+       -rm -f ./$(DEPDIR)/eval.Po
+       -rm -f ./$(DEPDIR)/ext.Po
+       -rm -f ./$(DEPDIR)/field.Po
+       -rm -f ./$(DEPDIR)/floatcomp.Po
+       -rm -f ./$(DEPDIR)/gawkapi.Po
+       -rm -f ./$(DEPDIR)/gawkmisc.Po
+       -rm -f ./$(DEPDIR)/int_array.Po
+       -rm -f ./$(DEPDIR)/io.Po
+       -rm -f ./$(DEPDIR)/main.Po
+       -rm -f ./$(DEPDIR)/mpfr.Po
+       -rm -f ./$(DEPDIR)/msg.Po
+       -rm -f ./$(DEPDIR)/node.Po
+       -rm -f ./$(DEPDIR)/profile.Po
+       -rm -f ./$(DEPDIR)/re.Po
+       -rm -f ./$(DEPDIR)/replace.Po
+       -rm -f ./$(DEPDIR)/str_array.Po
+       -rm -f ./$(DEPDIR)/symbol.Po
+       -rm -f ./$(DEPDIR)/version.Po
+       -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS \
+       uninstall-includeHEADERS
+
+.MAKE: $(am__recursive_targets) all check check-am install install-am \
+       install-exec install-exec-am install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
+       am--depfiles am--refresh check check-am check-local clean \
+       clean-binPROGRAMS clean-cscope clean-generic cscope \
+       cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
+       dist-gzip dist-hook dist-lzip dist-shar dist-tarZ dist-xz \
+       dist-zip dist-zstd distcheck distclean distclean-compile \
+       distclean-generic distclean-hdr distclean-local distclean-tags \
+       distcleancheck distdir distuninstallcheck dvi dvi-am html \
+       html-am info info-am install install-am install-binPROGRAMS \
+       install-binSCRIPTS install-data install-data-am install-dvi \
+       install-dvi-am install-exec install-exec-am install-exec-hook \
+       install-html install-html-am install-includeHEADERS \
+       install-info install-info-am install-man install-pdf \
+       install-pdf-am install-ps install-ps-am install-strip \
+       installcheck installcheck-am installdirs installdirs-am \
+       maintainer-clean maintainer-clean-generic mostlyclean \
+       mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
+       tags tags-am uninstall uninstall-am uninstall-binPROGRAMS \
+       uninstall-binSCRIPTS uninstall-includeHEADERS
+
+.PRECIOUS: Makefile
+
+
+# First, add a link from gawk to gawk-X.Y.Z.
+#
+# For GNU systems where gawk is awk, add a link to awk.
+# (This is done universally, which may not always be right, but
+# there's no easy way to distinguish GNU from non-GNU systems.)
+#
+# Use the transform, in case --program-prefix=XXX
+install-exec-hook:
+       (cd $(DESTDIR)$(bindir); \
+       name=`echo gawk | sed '$(transform)'` ; \
+       $(LN) $${name}$(EXEEXT) gawk-$(VERSION)$(EXEEXT) 2>/dev/null ; \
+       if [ ! -f awk$(EXEEXT) ]; \
+       then    $(LN_S) $${name}$(EXEEXT) awk$(EXEEXT); \
+       fi; exit 0)
+
+# Undo the above when uninstalling
+uninstall-links:
+       (cd $(DESTDIR)$(bindir); \
+       name=`echo gawk | sed '$(transform)'` ; \
+       if [ -f awk$(EXEEXT) ] && cmp awk$(EXEEXT) $${name}$(EXEEXT) > 
/dev/null; then rm -f awk$(EXEEXT); fi ; \
+       rm -f gawk-$(VERSION)$(EXEEXT); exit 0)
+
+uninstall-recursive: uninstall-links
+
+# force there to be a gawk executable before running tests
+check-local: gawk$(EXEEXT)
+
+# A little extra clean up when making distributions.
+dist-hook:
+       cd "$(distdir)"/extension ; rm -f *.o *.so
+       cd "$(srcdir)"/pc ; \
+       chmod u+w config.h ; \
+       sed -n -f configpk.sed < ../configure.ac > /tmp/tmp.sed ; \
+       sed -f config.sed < ../configh.in > /tmp/config.tmp ; \
+       sed -f /tmp/tmp.sed < /tmp/config.tmp > config.h ; \
+       $(RM) /tmp/tmp.sed /tmp/config.tmp
+       pwd
+       chmod u+w "$(distdir)"/pc/config.h
+       cp "$(srcdir)"/pc/config.h "$(distdir)"/pc/config.h
+
+# Special rules for individual files
+
+$(srcdir)/awkgram.c: awkgram.y
+       $(YACC) -o $@ $(AM_YFLAGS) $(YFLAGS) $<
+       sed 's/parse error/syntax error/g' < $@ > $@.tmp && mv $@.tmp $@
+
+$(srcdir)/command.c: command.y
+       $(YACC) -o $@ -p zz $<
+       sed 's/parse error/syntax error/g' < $@ > $@.tmp && mv $@.tmp $@
+
+$(srcdir)/pc/Makefile.tst: test/Makefile.in pc/Makefile.tst.prologue 
pc/GenMakefileTst.awk
+       $(AM_V_GEN)$(MKDIR_P) "$(srcdir)"/pc && \
+       cat "$(srcdir)"/pc/Makefile.tst.prologue > "$(srcdir)"/pc/Makefile.tst 
&& \
+       $(AWK) -f "$(srcdir)"/pc/GenMakefileTst.awk 
"$(srcdir)"/test/Makefile.in >> "$(srcdir)"/pc/Makefile.tst
+
+# This is for my development & testing.
+efence: gawk
+       $(CC) $(AM_LDFLAGS) -o gawk $$(ls *.o | grep -v '_p.o$$') $(LDADD) 
$(LIBS) -lefence
+
+diffout valgrind-scan zos-diffout:
+       @cd test && $(MAKE) $(AM_MAKEFLAGS) $@
+
+valgrind:
+       cd test; rm -f log.[0-9]*; \
+       make check VALGRIND="valgrind --leak-check=full --log-file=log.%p"; \
+       make valgrind-scan
+
+valgrind-noleak:
+       cd test; rm -f log.[0-9]*; \
+       make check VALGRIND="valgrind --leak-check=no --log-file=log.%p"; \
+       make valgrind-scan
+
+spell:
+       cd "$(srcdir)"/doc ; $(MAKE) spell
+
+distclean-local:
+       rm -fr .deps
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

-----------------------------------------------------------------------

Summary of changes:
 ChangeLog                       |   5 +
 awk.h                           |   4 +
 pc/ChangeLog                    |   4 +
 pc/Makefile.tst                 |   7 +-
 test/ChangeLog                  |   5 +
 test/Makefile.am                |   5 +-
 test/Makefile.in                |  10 +-
 test/Maketests                  |   5 +
 test/mdim1.awk                  |  15 ++
 test/mdim1.ok                   |   9 +
 test/mdim2.awk                  |   9 +
 test/{arrayprm3.ok => mdim2.ok} |   0
 test/mdim3.awk                  |  29 +++
 test/mdim3.ok                   | 520 ++++++++++++++++++++++++++++++++++++++++
 test/mdim4.awk                  | 168 +++++++++++++
 Makefile.in => test/mdim4.in    |   0
 Makefile.in => test/mdim4.ok    | 364 ++++++++++++++--------------
 17 files changed, 974 insertions(+), 185 deletions(-)
 create mode 100644 test/mdim1.awk
 create mode 100644 test/mdim1.ok
 create mode 100644 test/mdim2.awk
 copy test/{arrayprm3.ok => mdim2.ok} (100%)
 create mode 100644 test/mdim3.awk
 create mode 100644 test/mdim3.ok
 create mode 100644 test/mdim4.awk
 copy Makefile.in => test/mdim4.in (100%)
 copy Makefile.in => test/mdim4.ok (85%)


hooks/post-receive
-- 
gawk
[Prev in Thread]
Current Thread
[Next in Thread]
[SCM] gawk branch, feature/mdim-start-again, updated. gawk-4.1.0-4754-ga85b4b76, Arnold Robbins <=
Prev by Date: [SCM] gawk branch, feature/docit, updated. gawk-4.1.0-4751-g2ba29b6b
Previous by thread: [SCM] gawk branch, feature/docit, updated. gawk-4.1.0-4751-g2ba29b6b
Index(es):
- Date
- Thread