[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[SCM] gawk branch, gawk-5.2-stable, updated. gawk-4.1.0-4990-gef06cfd9
|
From: |
Arnold Robbins |
|
Subject: |
[SCM] gawk branch, gawk-5.2-stable, updated. gawk-4.1.0-4990-gef06cfd9 |
|
Date: |
Sun, 5 Feb 2023 11:19:50 -0500 (EST) |
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "gawk".
The branch, gawk-5.2-stable has been updated
via ef06cfd9b39fa79f2e31e74a5759869adb3fe4a9 (commit)
via cafd5fb7fd87c63e9ed74b6329571ba02584a82a (commit)
from e596ff6cddf96e575cc0f16e3a791bb6b51fc425 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://git.sv.gnu.org/cgit/gawk.git/commit/?id=ef06cfd9b39fa79f2e31e74a5759869adb3fe4a9
commit ef06cfd9b39fa79f2e31e74a5759869adb3fe4a9
Author: Arnold D. Robbins <arnold@skeeve.com>
Date: Sun Feb 5 18:19:30 2023 +0200
Update support files. Mainly copyright years.
diff --git a/support/ChangeLog b/support/ChangeLog
index cfc97f34..681809ba 100644
--- a/support/ChangeLog
+++ b/support/ChangeLog
@@ -1,3 +1,14 @@
+2023-02-05 Arnold D. Robbins <arnold@skeeve.com>
+
+ * cdefs.h, dfa.c, dfa.h, dynarray.h, flexmember.h, idx.h,
+ intprops.h, libc-config.h, localeinfo.c, localeinfo.h,
+ malloc/dynarray-skeleton.c, malloc/dynarray.h,
+ malloc/dynarray_at_failure.c, malloc/dynarray_emplace_enlarge.c,
+ malloc/dynarray_finalize.c, malloc/dynarray_resize.c,
+ malloc/dynarray_resize_clear.c, regcomp.c, regex.c, regex.h,
+ regex_internal.c, regex_interna.h, regexec.c, verify.h: Sync from
+ GNULIB. This mostly just updates the copyright year.
+
2022-12-23 Arnold D. Robbins <arnold@skeeve.com>
* verify.h: Update from GNULIB.
diff --git a/support/cdefs.h b/support/cdefs.h
index 7b8ed5b3..412f036c 100644
--- a/support/cdefs.h
+++ b/support/cdefs.h
@@ -1,4 +1,4 @@
-/* Copyright (C) 1992-2022 Free Software Foundation, Inc.
+/* Copyright (C) 1992-2023 Free Software Foundation, Inc.
Copyright The GNU Toolchain Authors.
This file is part of the GNU C Library.
@@ -140,32 +140,37 @@
#endif
+/* Gnulib avoids these definitions, as they don't work on non-glibc platforms.
+ In particular, __bos and __bos0 are defined differently in the Android libc.
+ */
+#ifndef __GNULIB_CDEFS
+
/* Fortify support. */
-#define __bos(ptr) __builtin_object_size (ptr, __USE_FORTIFY_LEVEL > 1)
-#define __bos0(ptr) __builtin_object_size (ptr, 0)
+# define __bos(ptr) __builtin_object_size (ptr, __USE_FORTIFY_LEVEL > 1)
+# define __bos0(ptr) __builtin_object_size (ptr, 0)
/* Use __builtin_dynamic_object_size at _FORTIFY_SOURCE=3 when available. */
-#if __USE_FORTIFY_LEVEL == 3 && (__glibc_clang_prereq (9, 0) \
- || __GNUC_PREREQ (12, 0))
-# define __glibc_objsize0(__o) __builtin_dynamic_object_size (__o, 0)
-# define __glibc_objsize(__o) __builtin_dynamic_object_size (__o, 1)
-#else
-# define __glibc_objsize0(__o) __bos0 (__o)
-# define __glibc_objsize(__o) __bos (__o)
-#endif
+# if __USE_FORTIFY_LEVEL == 3 && (__glibc_clang_prereq (9, 0) \
+ || __GNUC_PREREQ (12, 0))
+# define __glibc_objsize0(__o) __builtin_dynamic_object_size (__o, 0)
+# define __glibc_objsize(__o) __builtin_dynamic_object_size (__o, 1)
+# else
+# define __glibc_objsize0(__o) __bos0 (__o)
+# define __glibc_objsize(__o) __bos (__o)
+# endif
/* Compile time conditions to choose between the regular, _chk and _chk_warn
variants. These conditions should get evaluated to constant and optimized
away. */
-#define __glibc_safe_len_cond(__l, __s, __osz) ((__l) <= (__osz) / (__s))
-#define __glibc_unsigned_or_positive(__l) \
+# define __glibc_safe_len_cond(__l, __s, __osz) ((__l) <= (__osz) / (__s))
+# define __glibc_unsigned_or_positive(__l) \
((__typeof (__l)) 0 < (__typeof (__l)) -1 \
|| (__builtin_constant_p (__l) && (__l) > 0))
/* Length is known to be safe at compile time if the __L * __S <= __OBJSZ
condition can be folded to a constant and if it is true, or unknown (-1) */
-#define __glibc_safe_or_unknown_len(__l, __s, __osz) \
+# define __glibc_safe_or_unknown_len(__l, __s, __osz) \
((__osz) == (__SIZE_TYPE__) -1 \
|| (__glibc_unsigned_or_positive (__l) \
&& __builtin_constant_p (__glibc_safe_len_cond ((__SIZE_TYPE__) (__l), \
@@ -175,7 +180,7 @@
/* Conversely, we know at compile time that the length is unsafe if the
__L * __S <= __OBJSZ condition can be folded to a constant and if it is
false. */
-#define __glibc_unsafe_len(__l, __s, __osz) \
+# define __glibc_unsafe_len(__l, __s, __osz) \
(__glibc_unsigned_or_positive (__l) \
&& __builtin_constant_p (__glibc_safe_len_cond ((__SIZE_TYPE__) (__l), \
__s, __osz)) \
@@ -184,7 +189,7 @@
/* Fortify function f. __f_alias, __f_chk and __f_chk_warn must be
declared. */
-#define __glibc_fortify(f, __l, __s, __osz, ...) \
+# define __glibc_fortify(f, __l, __s, __osz, ...) \
(__glibc_safe_or_unknown_len (__l, __s, __osz) \
? __ ## f ## _alias (__VA_ARGS__) \
: (__glibc_unsafe_len (__l, __s, __osz) \
@@ -194,13 +199,16 @@
/* Fortify function f, where object size argument passed to f is the number of
elements and not total size. */
-#define __glibc_fortify_n(f, __l, __s, __osz, ...) \
+# define __glibc_fortify_n(f, __l, __s, __osz, ...) \
(__glibc_safe_or_unknown_len (__l, __s, __osz) \
? __ ## f ## _alias (__VA_ARGS__) \
: (__glibc_unsafe_len (__l, __s, __osz) \
? __ ## f ## _chk_warn (__VA_ARGS__, (__osz) / (__s)) \
: __ ## f ## _chk (__VA_ARGS__, (__osz) / (__s)))) \
+#endif
+
+
#if __GNUC_PREREQ (4,3)
# define __warnattr(msg) __attribute__((__warning__ (msg)))
# define __errordecl(name, msg) \
diff --git a/support/dfa.c b/support/dfa.c
index 4f8367af..211e1ed1 100644
--- a/support/dfa.c
+++ b/support/dfa.c
@@ -1,5 +1,5 @@
/* dfa.c - deterministic extended regexp routines for GNU
- Copyright (C) 1988, 1998, 2000, 2002, 2004-2005, 2007-2022 Free Software
+ Copyright (C) 1988, 1998, 2000, 2002, 2004-2005, 2007-2023 Free Software
Foundation, Inc.
This program is free software; you can redistribute it and/or modify
@@ -1138,9 +1138,14 @@ parse_bracket_exp (struct dfa *dfa)
while ((wc = wc1, (c = c1) != ']'));
if (colon_warning_state == 7)
- ((dfa->syntax.dfaopts & DFA_CONFUSING_BRACKETS_ERROR
- ? dfaerror : dfawarn)
- (_("character class syntax is [[:space:]], not [:space:]")));
+ {
+ char const *msg
+ = _("character class syntax is [[:space:]], not [:space:]");
+ if (dfa->syntax.dfaopts & DFA_CONFUSING_BRACKETS_ERROR)
+ dfaerror (msg);
+ else
+ dfawarn (msg);
+ }
if (! known_bracket_exp)
return BACKREF;
diff --git a/support/dfa.h b/support/dfa.h
index 3e3a938a..6ac30ffa 100644
--- a/support/dfa.h
+++ b/support/dfa.h
@@ -1,5 +1,5 @@
/* dfa.h - declarations for GNU deterministic regexp compiler
- Copyright (C) 1988, 1998, 2007, 2009-2022 Free Software Foundation, Inc.
+ Copyright (C) 1988, 1998, 2007, 2009-2023 Free Software Foundation, Inc.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
diff --git a/support/dynarray.h b/support/dynarray.h
index bada2b54..58f68823 100644
--- a/support/dynarray.h
+++ b/support/dynarray.h
@@ -1,5 +1,5 @@
/* Type-safe arrays which grow dynamically.
- Copyright 2021-2022 Free Software Foundation, Inc.
+ Copyright 2021-2023 Free Software Foundation, Inc.
This file is free software: you can redistribute it and/or modify
it under the terms of the GNU Lesser General Public License as
diff --git a/support/flexmember.h b/support/flexmember.h
index 1545639f..a6cc876a 100644
--- a/support/flexmember.h
+++ b/support/flexmember.h
@@ -1,6 +1,6 @@
/* Sizes of structs with flexible array members.
- Copyright 2016-2022 Free Software Foundation, Inc.
+ Copyright 2016-2023 Free Software Foundation, Inc.
This file is part of the GNU C Library.
diff --git a/support/idx.h b/support/idx.h
index c3669dda..23020b7e 100644
--- a/support/idx.h
+++ b/support/idx.h
@@ -1,5 +1,5 @@
/* A type for indices and sizes.
- Copyright (C) 2020-2022 Free Software Foundation, Inc.
+ Copyright (C) 2020-2023 Free Software Foundation, Inc.
This file is part of the GNU C Library.
The GNU C Library is free software; you can redistribute it and/or
diff --git a/support/intprops.h b/support/intprops.h
index f182ddc1..44b5e60f 100644
--- a/support/intprops.h
+++ b/support/intprops.h
@@ -1,6 +1,6 @@
/* intprops.h -- properties of integer types
- Copyright (C) 2001-2022 Free Software Foundation, Inc.
+ Copyright (C) 2001-2023 Free Software Foundation, Inc.
This program is free software: you can redistribute it and/or modify it
under the terms of the GNU Lesser General Public License as published
diff --git a/support/libc-config.h b/support/libc-config.h
index a56665b1..5f5ad010 100644
--- a/support/libc-config.h
+++ b/support/libc-config.h
@@ -1,6 +1,6 @@
/* System definitions for code taken from the GNU C Library
- Copyright 2017-2022 Free Software Foundation, Inc.
+ Copyright 2017-2023 Free Software Foundation, Inc.
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
@@ -137,8 +137,6 @@
# undef __attribute_returns_twice__
# undef __attribute_used__
# undef __attribute_warn_unused_result__
-# undef __bos
-# undef __bos0
# undef __errordecl
# undef __extension__
# undef __extern_always_inline
@@ -147,21 +145,13 @@
# undef __fortified_attr_access
# undef __fortify_function
# undef __glibc_c99_flexarr_available
-# undef __glibc_fortify
-# undef __glibc_fortify_n
# undef __glibc_has_attribute
# undef __glibc_has_builtin
# undef __glibc_has_extension
# undef __glibc_likely
# undef __glibc_macro_warning
# undef __glibc_macro_warning1
-# undef __glibc_objsize
-# undef __glibc_objsize0
-# undef __glibc_safe_len_cond
-# undef __glibc_safe_or_unknown_len
# undef __glibc_unlikely
-# undef __glibc_unsafe_len
-# undef __glibc_unsigned_or_positive
# undef __inline
# undef __ptr_t
# undef __restrict
@@ -170,6 +160,18 @@
# undef __va_arg_pack_len
# undef __warnattr
# undef __wur
+# ifndef __GNULIB_CDEFS
+# undef __bos
+# undef __bos0
+# undef __glibc_fortify
+# undef __glibc_fortify_n
+# undef __glibc_objsize
+# undef __glibc_objsize0
+# undef __glibc_safe_len_cond
+# undef __glibc_safe_or_unknown_len
+# undef __glibc_unsafe_len
+# undef __glibc_unsigned_or_positive
+# endif
/* Include our copy of glibc <sys/cdefs.h>. */
# include <cdefs.h>
diff --git a/support/localeinfo.c b/support/localeinfo.c
index 52b8a785..534c2760 100644
--- a/support/localeinfo.c
+++ b/support/localeinfo.c
@@ -1,6 +1,6 @@
/* locale information
- Copyright 2016-2022 Free Software Foundation, Inc.
+ Copyright 2016-2023 Free Software Foundation, Inc.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
diff --git a/support/localeinfo.h b/support/localeinfo.h
index f117374a..bd443ef4 100644
--- a/support/localeinfo.h
+++ b/support/localeinfo.h
@@ -1,6 +1,6 @@
/* locale information
- Copyright 2016-2022 Free Software Foundation, Inc.
+ Copyright 2016-2023 Free Software Foundation, Inc.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
diff --git a/support/malloc/dynarray-skeleton.c
b/support/malloc/dynarray-skeleton.c
index bad548a4..580c278b 100644
--- a/support/malloc/dynarray-skeleton.c
+++ b/support/malloc/dynarray-skeleton.c
@@ -1,5 +1,5 @@
/* Type-safe arrays which grow dynamically.
- Copyright (C) 2017-2022 Free Software Foundation, Inc.
+ Copyright (C) 2017-2023 Free Software Foundation, Inc.
This file is part of the GNU C Library.
The GNU C Library is free software; you can redistribute it and/or
diff --git a/support/malloc/dynarray.h b/support/malloc/dynarray.h
index df1aa416..a9a3b085 100644
--- a/support/malloc/dynarray.h
+++ b/support/malloc/dynarray.h
@@ -1,5 +1,5 @@
/* Type-safe arrays which grow dynamically. Shared definitions.
- Copyright (C) 2017-2022 Free Software Foundation, Inc.
+ Copyright (C) 2017-2023 Free Software Foundation, Inc.
This file is part of the GNU C Library.
The GNU C Library is free software; you can redistribute it and/or
diff --git a/support/malloc/dynarray_at_failure.c
b/support/malloc/dynarray_at_failure.c
index 062ab706..ebc93109 100644
--- a/support/malloc/dynarray_at_failure.c
+++ b/support/malloc/dynarray_at_failure.c
@@ -1,5 +1,5 @@
/* Report an dynamic array index out of bounds condition.
- Copyright (C) 2017-2022 Free Software Foundation, Inc.
+ Copyright (C) 2017-2023 Free Software Foundation, Inc.
This file is part of the GNU C Library.
The GNU C Library is free software; you can redistribute it and/or
diff --git a/support/malloc/dynarray_emplace_enlarge.c
b/support/malloc/dynarray_emplace_enlarge.c
index 0cff2e70..7da53931 100644
--- a/support/malloc/dynarray_emplace_enlarge.c
+++ b/support/malloc/dynarray_emplace_enlarge.c
@@ -1,5 +1,5 @@
/* Increase the size of a dynamic array in preparation of an emplace operation.
- Copyright (C) 2017-2022 Free Software Foundation, Inc.
+ Copyright (C) 2017-2023 Free Software Foundation, Inc.
This file is part of the GNU C Library.
The GNU C Library is free software; you can redistribute it and/or
diff --git a/support/malloc/dynarray_finalize.c
b/support/malloc/dynarray_finalize.c
index 3f360c3a..673595a5 100644
--- a/support/malloc/dynarray_finalize.c
+++ b/support/malloc/dynarray_finalize.c
@@ -1,5 +1,5 @@
/* Copy the dynamically-allocated area to an explicitly-sized heap allocation.
- Copyright (C) 2017-2022 Free Software Foundation, Inc.
+ Copyright (C) 2017-2023 Free Software Foundation, Inc.
This file is part of the GNU C Library.
The GNU C Library is free software; you can redistribute it and/or
diff --git a/support/malloc/dynarray_resize.c b/support/malloc/dynarray_resize.c
index 8d1922e5..7ecd4de6 100644
--- a/support/malloc/dynarray_resize.c
+++ b/support/malloc/dynarray_resize.c
@@ -1,5 +1,5 @@
/* Increase the size of a dynamic array.
- Copyright (C) 2017-2022 Free Software Foundation, Inc.
+ Copyright (C) 2017-2023 Free Software Foundation, Inc.
This file is part of the GNU C Library.
The GNU C Library is free software; you can redistribute it and/or
diff --git a/support/malloc/dynarray_resize_clear.c
b/support/malloc/dynarray_resize_clear.c
index 8cf1b0d0..bb23c522 100644
--- a/support/malloc/dynarray_resize_clear.c
+++ b/support/malloc/dynarray_resize_clear.c
@@ -1,5 +1,5 @@
/* Increase the size of a dynamic array and clear the new part.
- Copyright (C) 2017-2022 Free Software Foundation, Inc.
+ Copyright (C) 2017-2023 Free Software Foundation, Inc.
This file is part of the GNU C Library.
The GNU C Library is free software; you can redistribute it and/or
diff --git a/support/regcomp.c b/support/regcomp.c
index 122c3de5..89478396 100644
--- a/support/regcomp.c
+++ b/support/regcomp.c
@@ -1,5 +1,5 @@
/* Extended regular expression matching and search library.
- Copyright (C) 2002-2022 Free Software Foundation, Inc.
+ Copyright (C) 2002-2023 Free Software Foundation, Inc.
This file is part of the GNU C Library.
Contributed by Isamu Hasegawa <isamu@yamato.ibm.com>.
diff --git a/support/regex.c b/support/regex.c
index ff117678..3beb0deb 100644
--- a/support/regex.c
+++ b/support/regex.c
@@ -1,5 +1,5 @@
/* Extended regular expression matching and search library.
- Copyright (C) 2002-2022 Free Software Foundation, Inc.
+ Copyright (C) 2002-2023 Free Software Foundation, Inc.
This file is part of the GNU C Library.
Contributed by Isamu Hasegawa <isamu@yamato.ibm.com>.
diff --git a/support/regex.h b/support/regex.h
index a7e0bd02..9ef0252f 100644
--- a/support/regex.h
+++ b/support/regex.h
@@ -1,6 +1,6 @@
/* Definitions for data structures and routines for the regular
expression library.
- Copyright (C) 1985, 1989-2022 Free Software Foundation, Inc.
+ Copyright (C) 1985, 1989-2023 Free Software Foundation, Inc.
This file is part of the GNU C Library.
The GNU C Library is free software; you can redistribute it and/or
diff --git a/support/regex_internal.c b/support/regex_internal.c
index 0e6919f3..998a19b7 100644
--- a/support/regex_internal.c
+++ b/support/regex_internal.c
@@ -1,5 +1,5 @@
/* Extended regular expression matching and search library.
- Copyright (C) 2002-2022 Free Software Foundation, Inc.
+ Copyright (C) 2002-2023 Free Software Foundation, Inc.
This file is part of the GNU C Library.
Contributed by Isamu Hasegawa <isamu@yamato.ibm.com>.
diff --git a/support/regex_internal.h b/support/regex_internal.h
index 784d2d45..149ec2e8 100644
--- a/support/regex_internal.h
+++ b/support/regex_internal.h
@@ -1,5 +1,5 @@
/* Extended regular expression matching and search library.
- Copyright (C) 2002-2022 Free Software Foundation, Inc.
+ Copyright (C) 2002-2023 Free Software Foundation, Inc.
This file is part of the GNU C Library.
Contributed by Isamu Hasegawa <isamu@yamato.ibm.com>.
diff --git a/support/regexec.c b/support/regexec.c
index 521cb028..13e0349e 100644
--- a/support/regexec.c
+++ b/support/regexec.c
@@ -1,5 +1,5 @@
/* Extended regular expression matching and search library.
- Copyright (C) 2002-2022 Free Software Foundation, Inc.
+ Copyright (C) 2002-2023 Free Software Foundation, Inc.
This file is part of the GNU C Library.
Contributed by Isamu Hasegawa <isamu@yamato.ibm.com>.
diff --git a/support/verify.h b/support/verify.h
index 5225a8e6..f0b3fc58 100644
--- a/support/verify.h
+++ b/support/verify.h
@@ -1,6 +1,6 @@
/* Compile-time assert-like macros.
- Copyright (C) 2005-2006, 2009-2022 Free Software Foundation, Inc.
+ Copyright (C) 2005-2006, 2009-2023 Free Software Foundation, Inc.
This file is free software: you can redistribute it and/or modify
it under the terms of the GNU Lesser General Public License as
@@ -222,10 +222,32 @@ template <int w>
/* _GL_STATIC_ASSERT_H is defined if this code is copied into assert.h. */
#ifdef _GL_STATIC_ASSERT_H
-# if !defined _GL_HAVE__STATIC_ASSERT1 && !defined _Static_assert
-# define _Static_assert(R, ...) \
- _GL_VERIFY ((R), "static assertion failed", -)
+/* Define _Static_assert if needed. */
+/* With clang ⥠3.8.0 in C++ mode, _Static_assert already works and accepts
+ 1 or 2 arguments. We better don't override it, because clang's standard
+ C++ library uses static_assert inside classes in several places, and our
+ replacement via _GL_VERIFY does not work in these contexts. */
+# if (defined __cplusplus && defined __clang__ \
+ && (4 <= __clang_major__ + (8 <= __clang_minor__)))
+# if 5 <= __clang_major__
+/* Avoid "warning: 'static_assert' with no message is a C++17 extension". */
+# pragma clang diagnostic ignored "-Wc++17-extensions"
+# else
+/* Avoid "warning: static_assert with no message is a C++1z extension". */
+# pragma clang diagnostic ignored "-Wc++1z-extensions"
+# endif
+# elif !defined _GL_HAVE__STATIC_ASSERT1 && !defined _Static_assert
+# if !defined _MSC_VER || defined __clang__
+# define _Static_assert(...) \
+ _GL_VERIFY (__VA_ARGS__, "static assertion failed", -)
+# else
+ /* Work around MSVC preprocessor incompatibility with ISO C; see
+ <https://stackoverflow.com/questions/5134523/>. */
+# define _Static_assert(R, ...) \
+ _GL_VERIFY ((R), "static assertion failed", -)
+# endif
# endif
+/* Define static_assert if needed. */
# if (!defined static_assert \
&& __STDC_VERSION__ < 202311 \
&& (!defined __cplusplus \
@@ -235,15 +257,16 @@ template <int w>
/* MSVC 14 in C++ mode supports the two-arguments static_assert but not
the one-argument static_assert, and it does not support _Static_assert.
We have to play preprocessor tricks to distinguish the two cases.
- Since the MSVC preprocessor is not ISO C compliant (cf.
- <https://stackoverflow.com/questions/5134523/>), the solution is specific
- to MSVC. */
+ Since the MSVC preprocessor is not ISO C compliant (see above),.
+ the solution is specific to MSVC. */
# define _GL_EXPAND(x) x
# define _GL_SA1(a1) static_assert ((a1), "static assertion failed")
# define _GL_SA2 static_assert
# define _GL_SA3 static_assert
# define _GL_SA_PICK(x1,x2,x3,x4,...) x4
# define static_assert(...)
_GL_EXPAND(_GL_SA_PICK(__VA_ARGS__,_GL_SA3,_GL_SA2,_GL_SA1)) (__VA_ARGS__)
+/* Avoid "fatal error C1189: #error: The C++ Standard Library forbids
macroizing keywords." */
+# define _ALLOW_KEYWORD_MACROS 1
# else
# define static_assert _Static_assert /* C11 requires this #define. */
# endif
@@ -252,7 +275,9 @@ template <int w>
/* @assert.h omit start@ */
-#if 3 < __GNUC__ + (3 < __GNUC_MINOR__ + (4 <= __GNUC_PATCHLEVEL__))
+#if defined __clang_major__ && __clang_major__ < 5
+# define _GL_HAS_BUILTIN_TRAP 0
+#elif 3 < __GNUC__ + (3 < __GNUC_MINOR__ + (4 <= __GNUC_PATCHLEVEL__))
# define _GL_HAS_BUILTIN_TRAP 1
#elif defined __has_builtin
# define _GL_HAS_BUILTIN_TRAP __has_builtin (__builtin_trap)
@@ -260,7 +285,9 @@ template <int w>
# define _GL_HAS_BUILTIN_TRAP 0
#endif
-#if 4 < __GNUC__ + (5 <= __GNUC_MINOR__)
+#if defined __clang_major__ && __clang_major__ < 5
+# define _GL_HAS_BUILTIN_UNREACHABLE 0
+#elif 4 < __GNUC__ + (5 <= __GNUC_MINOR__)
# define _GL_HAS_BUILTIN_UNREACHABLE 1
#elif defined __has_builtin
# define _GL_HAS_BUILTIN_UNREACHABLE __has_builtin (__builtin_unreachable)
http://git.sv.gnu.org/cgit/gawk.git/commit/?id=cafd5fb7fd87c63e9ed74b6329571ba02584a82a
commit cafd5fb7fd87c63e9ed74b6329571ba02584a82a
Author: Arnold D. Robbins <arnold@skeeve.com>
Date: Sun Feb 5 18:03:02 2023 +0200
Update build-aux files.
diff --git a/build-aux/ChangeLog b/build-aux/ChangeLog
index d7226b48..3d2ebd28 100644
--- a/build-aux/ChangeLog
+++ b/build-aux/ChangeLog
@@ -1,3 +1,10 @@
+2023-02-05 Arnold D. Robbins <arnold@skeeve.com>
+
+ * ar-lib, compile, config.guess, config.rpath, config.sub,
+ depcomp: Update from GNULIB. Primarily updates to the copyright year.
+ * texinfo.tex: Update from GNULIB. Only change is to remove
+ trailing whitespace.
+
2023-01-03 Arnold D. Robbins <arnold@skeeve.com>
* texinfo.tex: Updated to latest version from ftp.gnu.org.
diff --git a/build-aux/ar-lib b/build-aux/ar-lib
index 54c6bdbf..17de55e7 100755
--- a/build-aux/ar-lib
+++ b/build-aux/ar-lib
@@ -4,7 +4,7 @@
me=ar-lib
scriptversion=2019-07-04.01; # UTC
-# Copyright (C) 2010-2022 Free Software Foundation, Inc.
+# Copyright (C) 2010-2023 Free Software Foundation, Inc.
# Written by Peter Rosin <peda@lysator.liu.se>.
#
# This program is free software; you can redistribute it and/or modify
diff --git a/build-aux/compile b/build-aux/compile
index dfc94659..ba883b54 100755
--- a/build-aux/compile
+++ b/build-aux/compile
@@ -3,7 +3,7 @@
scriptversion=2018-03-07.03; # UTC
-# Copyright (C) 1999-2022 Free Software Foundation, Inc.
+# Copyright (C) 1999-2023 Free Software Foundation, Inc.
# Written by Tom Tromey <tromey@cygnus.com>.
#
# This program is free software; you can redistribute it and/or modify
diff --git a/build-aux/config.guess b/build-aux/config.guess
index 980b0208..69188da7 100755
--- a/build-aux/config.guess
+++ b/build-aux/config.guess
@@ -1,10 +1,10 @@
#! /bin/sh
# Attempt to guess a canonical system name.
-# Copyright 1992-2022 Free Software Foundation, Inc.
+# Copyright 1992-2023 Free Software Foundation, Inc.
# shellcheck disable=SC2006,SC2268 # see below for rationale
-timestamp='2022-09-17'
+timestamp='2023-01-01'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
@@ -60,7 +60,7 @@ version="\
GNU config.guess ($timestamp)
Originally written by Per Bothner.
-Copyright 1992-2022 Free Software Foundation, Inc.
+Copyright 1992-2023 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
diff --git a/build-aux/config.rpath b/build-aux/config.rpath
index 1e1ab679..1e2595ff 100755
--- a/build-aux/config.rpath
+++ b/build-aux/config.rpath
@@ -2,7 +2,7 @@
# Output a system dependent set of variables, describing how to set the
# run time search path of shared libraries in an executable.
#
-# Copyright 1996-2022 Free Software Foundation, Inc.
+# Copyright 1996-2023 Free Software Foundation, Inc.
# Taken from GNU libtool, 2001
# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
#
diff --git a/build-aux/config.sub b/build-aux/config.sub
index baf1512b..de4259e4 100755
--- a/build-aux/config.sub
+++ b/build-aux/config.sub
@@ -1,10 +1,10 @@
#! /bin/sh
# Configuration validation subroutine script.
-# Copyright 1992-2022 Free Software Foundation, Inc.
+# Copyright 1992-2023 Free Software Foundation, Inc.
# shellcheck disable=SC2006,SC2268 # see below for rationale
-timestamp='2022-09-17'
+timestamp='2023-01-21'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
@@ -76,7 +76,7 @@ Report bugs and patches to <config-patches@gnu.org>."
version="\
GNU config.sub ($timestamp)
-Copyright 1992-2022 Free Software Foundation, Inc.
+Copyright 1992-2023 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -1075,7 +1075,7 @@ case $cpu-$vendor in
pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
cpu=i586
;;
- pentiumpro-* | p6-* | 6x86-* | athlon-* | athalon_*-*)
+ pentiumpro-* | p6-* | 6x86-* | athlon-* | athlon_*-*)
cpu=i686
;;
pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
diff --git a/build-aux/depcomp b/build-aux/depcomp
index 703eed27..ce5c2f7b 100755
--- a/build-aux/depcomp
+++ b/build-aux/depcomp
@@ -3,7 +3,7 @@
scriptversion=2022-09-18.14; # UTC
-# Copyright (C) 1999-2022 Free Software Foundation, Inc.
+# Copyright (C) 1999-2023 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
diff --git a/build-aux/texinfo.tex b/build-aux/texinfo.tex
index b4caf96e..3cccf01d 100644
--- a/build-aux/texinfo.tex
+++ b/build-aux/texinfo.tex
@@ -1,5 +1,5 @@
% texinfo.tex -- TeX macros to handle Texinfo files.
-%
+%
% Load plain if necessary, i.e., if running under initex.
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
%
@@ -212,7 +212,7 @@
% @errormsg{MSG}. Do the index-like expansions on MSG, but if things
% aren't perfect, it's not the end of the world, being an error message,
% after all.
-%
+%
\def\errormsg{\begingroup \indexnofonts \doerrormsg}
\def\doerrormsg#1{\errmessage{#1}}
@@ -426,7 +426,7 @@
}%
}
-% First remove any @comment, then any @c comment. Pass the result on to
+% First remove any @comment, then any @c comment. Pass the result on to
% \argcheckspaces.
\def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm}
\def\argremovec#1\c#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm}
@@ -1048,8 +1048,8 @@ where each line of input produces a line of output.}
end
end
}
- % The -2 in the arguments here gives all the input to TeX catcode 12
- % (other) or 10 (space), preventing undefined control sequence errors. See
+ % The -2 in the arguments here gives all the input to TeX catcode 12
+ % (other) or 10 (space), preventing undefined control sequence errors. See
% https://lists.gnu.org/archive/html/bug-texinfo/2019-08/msg00031.html
%
\endgroup
@@ -1143,7 +1143,7 @@ where each line of input produces a line of output.}
% for display in the outlines, and in other places. Thus, we have to
% double any backslashes. Otherwise, a name like "\node" will be
% interpreted as a newline (\n), followed by o, d, e. Not good.
-%
+%
% See http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html and
% related messages. The final outcome is that it is up to the TeX user
% to double the backslashes and otherwise make the string valid, so
@@ -1435,7 +1435,7 @@ output) for that.)}
% We use the node names as the destinations.
%
% Currently we prefix the section name with the section number
- % for chapter and appendix headings only in order to avoid too much
+ % for chapter and appendix headings only in order to avoid too much
% horizontal space being required in the PDF viewer.
\def\numchapentry##1##2##3##4{%
\dopdfoutline{##2 ##1}{count-\expnumber{chap##2}}{##3}{##4}}%
@@ -1458,7 +1458,7 @@ output) for that.)}
% their "best" equivalent, based on the @documentencoding. Too
% much work for too little return. Just use the ASCII equivalents
% we use for the index sort strings.
- %
+ %
\indexnofonts
\setupdatafile
% We can have normal brace characters in the PDF outlines, unlike
@@ -1684,7 +1684,7 @@ output) for that.)}
% We use node names as destinations.
%
% Currently we prefix the section name with the section number
- % for chapter and appendix headings only in order to avoid too much
+ % for chapter and appendix headings only in order to avoid too much
% horizontal space being required in the PDF viewer.
\def\partentry##1##2##3##4{}% ignore parts in the outlines
\def\numchapentry##1##2##3##4{%
@@ -2715,7 +2715,7 @@ end
}
% Commands to set the quote options.
-%
+%
\parseargdef\codequoteundirected{%
\def\temp{#1}%
\ifx\temp\onword
@@ -2756,7 +2756,7 @@ end
% If we are in a monospaced environment, however, 1) always use \ttsl,
% and 2) do not add an italic correction.
\def\dosmartslant#1#2{%
- \ifusingtt
+ \ifusingtt
{{\ttsl #2}\let\next=\relax}%
{\def\next{{#1#2}\smartitaliccorrection}}%
\next
@@ -2939,14 +2939,14 @@ end
\gdef\codedash{\futurelet\next\codedashfinish}
\gdef\codedashfinish{%
\normaldash % always output the dash character itself.
- %
+ %
% Now, output a discretionary to allow a line break, unless
% (a) the next character is a -, or
% (b) the preceding character is a -.
% E.g., given --posix, we do not want to allow a break after either -.
% Given --foo-bar, we do want to allow a break between the - and the b.
\ifx\next\codedash \else
- \ifx\codedashprev\codedash
+ \ifx\codedashprev\codedash
\else \discretionary{}{}{}\fi
\fi
% we need the space after the = for the case when \next itself is a
@@ -3036,7 +3036,7 @@ end
% For pdfTeX and LuaTeX
\ifurefurlonlylink
% PDF plus option to not display url, show just arg
- \unhbox0
+ \unhbox0
\else
% PDF, normally display both arg and url for consistency,
% visibility, if the pdf is eventually used to print, etc.
@@ -3049,7 +3049,7 @@ end
% For XeTeX
\ifurefurlonlylink
% PDF plus option to not display url, show just arg
- \unhbox0
+ \unhbox0
\else
% PDF, normally display both arg and url for consistency,
% visibility, if the pdf is eventually used to print, etc.
@@ -3107,10 +3107,10 @@ end
}
}
-% By default we'll break after the special characters, but some people like to
-% break before the special chars, so allow that. Also allow no breaking at
+% By default we'll break after the special characters, but some people like to
+% break before the special chars, so allow that. Also allow no breaking at
% all, for manual control.
-%
+%
\parseargdef\urefbreakstyle{%
\def\txiarg{#1}%
\ifx\txiarg\wordnone
@@ -3129,10 +3129,10 @@ end
\def\wordnone{none}
% Allow a ragged right output to aid breaking long URL's. There can
-% be a break at the \allowbreak with no extra glue (if the existing stretch in
+% be a break at the \allowbreak with no extra glue (if the existing stretch in
% the line is sufficient), a break at the \penalty with extra glue added
% at the end of the line, or no break at all here.
-% Changing the value of the penalty and/or the amount of stretch affects how
+% Changing the value of the penalty and/or the amount of stretch affects how
% preferable one choice is over the other.
\def\urefallowbreak{%
\penalty0\relax
@@ -3347,7 +3347,7 @@ $$%
% @inlinefmt{FMTNAME,PROCESSED-TEXT} and @inlineraw{FMTNAME,RAW-TEXT}.
% Ignore unless FMTNAME == tex; then it is like @iftex and @tex,
% except specified as a normal braced arg, so no newlines to worry about.
-%
+%
\def\outfmtnametex{tex}
%
\long\def\inlinefmt#1{\doinlinefmt #1,\finish}
@@ -3355,7 +3355,7 @@ $$%
\def\inlinefmtname{#1}%
\ifx\inlinefmtname\outfmtnametex \ignorespaces #2\fi
}
-%
+%
% @inlinefmtifelse{FMTNAME,THEN-TEXT,ELSE-TEXT} expands THEN-TEXT if
% FMTNAME is tex, else ELSE-TEXT.
\long\def\inlinefmtifelse#1{\doinlinefmtifelse #1,,,\finish}
@@ -3371,7 +3371,7 @@ $$%
% *right* brace they would have to use a command anyway, so they may as
% well use a command to get a left brace too. We could re-use the
% delimiter character idea from \verb, but it seems like overkill.
-%
+%
\long\def\inlineraw{\tex \doinlineraw}
\long\def\doinlineraw#1{\doinlinerawtwo #1,\finish}
\def\doinlinerawtwo#1,#2,\finish{%
@@ -3657,7 +3657,7 @@ $$%
% for non-CM glyphs. That is ec* for regular text and tc* for the text
% companion symbols (LaTeX TS1 encoding). Both are part of the ec
% package and follow the same conventions.
-%
+%
\def\ecfont{\etcfont{e}}
\def\tcfont{\etcfont{t}}
%
@@ -3739,7 +3739,7 @@ $$%
after the title page.}}%
\def\setshortcontentsaftertitlepage{%
\errmessage{@setshortcontentsaftertitlepage has been removed as a Texinfo
- command; move your @shortcontents and @contents commands if you
+ command; move your @shortcontents and @contents commands if you
want the contents after the title page.}}%
\parseargdef\shorttitlepage{%
@@ -3793,7 +3793,7 @@ $$%
% don't worry much about spacing, ragged right. This should be used
% inside a \vbox, and fonts need to be set appropriately first. \par should
% be specified before the end of the \vbox, since a vbox is a group.
-%
+%
\def\raggedtitlesettings{%
\rm
\hyphenpenalty=10000
@@ -4628,7 +4628,7 @@ $$%
% Like \expandablevalue, but completely expandable (the \message in the
% definition above operates at the execution level of TeX). Used when
% writing to auxiliary files, due to the expansion that \write does.
-% If flag is undefined, pass through an unexpanded @value command: maybe it
+% If flag is undefined, pass through an unexpanded @value command: maybe it
% will be set by the time it is read back in.
%
% NB flag names containing - or _ may not work here.
@@ -4652,7 +4652,7 @@ $$%
% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
% with @set.
-%
+%
% To get the special treatment we need for `@end ifset,' we call
% \makecond and then redefine.
%
@@ -4685,7 +4685,7 @@ $$%
% without the @) is in fact defined. We can only feasibly check at the
% TeX level, so something like `mathcode' is going to considered
% defined even though it is not a Texinfo command.
-%
+%
\makecond{ifcommanddefined}
\def\ifcommanddefined{\parsearg{\doifcmddefined{\let\next=\ifcmddefinedfail}}}
%
@@ -4793,7 +4793,7 @@ $$%
\def\docodeindex#1{\edef\indexname{#1}\parsearg\docodeindexxxx}
\def\docodeindexxxx #1{\docind{\indexname}{#1}}
-
+
% \definedummyword defines \#1 as \string\#1\space, thus effectively
% preventing its expansion. This is used only for control words,
% not control letters, because the \space would be incorrect for
@@ -4810,7 +4810,7 @@ $$%
\def\definedummyword #1{\def#1{\string#1\space}}%
\def\definedummyletter#1{\def#1{\string#1}}%
-% Used for the aux, toc and index files to prevent expansion of Texinfo
+% Used for the aux, toc and index files to prevent expansion of Texinfo
% commands. Most of the commands are controlled through the
% \ifdummies conditional.
%
@@ -5102,7 +5102,7 @@ $$%
\let\value\indexnofontsvalue
}
-
+
% #1 is the index name, #2 is the entry text.
@@ -5143,7 +5143,7 @@ $$%
\ifx\suffix\indexisfl\def\suffix{f1}\fi
% Open the file
\immediate\openout\csname#1indfile\endcsname \jobname.\suffix
- % Using \immediate above here prevents an object entering into the current
+ % Using \immediate above here prevents an object entering into the current
% box, which could confound checks such as those in \safewhatsit for
% preceding skips.
\typeout{Writing index file \jobname.\suffix}%
@@ -5195,7 +5195,7 @@ $$%
\ifx\segment\isfinish
\else
%
- % Fully expand the segment, throwing away any @sortas directives, and
+ % Fully expand the segment, throwing away any @sortas directives, and
% trim spaces.
\edef\trimmed{\segment}%
\edef\trimmed{\expandafter\eatspaces\expandafter{\trimmed}}%
@@ -5259,12 +5259,12 @@ $$%
% the current value of \escapechar.
\def\escapeisbackslash{\escapechar=`\\}
-% Use \ in index files by default. texi2dvi didn't support @ as the escape
-% character (as it checked for "\entry" in the files, and not "@entry"). When
-% the new version of texi2dvi has had a chance to become more prevalent, then
-% the escape character can change back to @ again. This should be an easy
-% change to make now because both @ and \ are only used as escape characters
in
-% index files, never standing for themselves.
+% Use \ in index files by default. texi2dvi didn't support @ as the escape
+% character (as it checked for "\entry" in the files, and not "@entry"). When
+% the new version of texi2dvi has had a chance to become more prevalent, then
+% the escape character can change back to @ again. This should be an easy
+% change to make now because both @ and \ are only used as escape characters in
+% index files, never standing for themselves.
%
\set txiindexescapeisbackslash
@@ -5287,7 +5287,7 @@ $$%
\def\}{\rbracechar{}}%
\uccode`\~=`\\ \uppercase{\def~{\backslashchar{}}}%
%
- % Split the entry into primary entry and any subentries, and get the index
+ % Split the entry into primary entry and any subentries, and get the index
% sort key.
\splitindexentry\indextext
%
@@ -5468,18 +5468,18 @@ $$%
\uccode`\~=`\\ \uppercase{\if\noexpand~}\noexpand#1
\ifflagclear{txiskipindexfileswithbackslash}{%
\errmessage{%
-ERROR: A sorted index file in an obsolete format was skipped.
+ERROR: A sorted index file in an obsolete format was skipped.
To fix this problem, please upgrade your version of 'texi2dvi'
or 'texi2pdf' to that at <https://ftp.gnu.org/gnu/texinfo>.
-If you are using an old version of 'texindex' (part of the Texinfo
+If you are using an old version of 'texindex' (part of the Texinfo
distribution), you may also need to upgrade to a newer version (at least 6.0).
You may be able to typeset the index if you run
'texindex \jobname.\indexname' yourself.
-You could also try setting the 'txiindexescapeisbackslash' flag by
+You could also try setting the 'txiindexescapeisbackslash' flag by
running a command like
-'texi2dvi -t "@set txiindexescapeisbackslash" \jobname.texi'. If you do
+'texi2dvi -t "@set txiindexescapeisbackslash" \jobname.texi'. If you do
this, Texinfo will try to use index files in the old format.
-If you continue to have problems, deleting the index files and starting again
+If you continue to have problems, deleting the index files and starting again
might help (with 'rm \jobname.?? \jobname.??s')%
}%
}{%
@@ -5552,7 +5552,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% bottom of a column to reduce an increase in inter-line spacing.
\nobreak
\vskip 0pt plus 5\baselineskip
- \penalty -300
+ \penalty -300
\vskip 0pt plus -5\baselineskip
%
% Typeset the initial. Making this add up to a whole number of
@@ -5684,7 +5684,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\advance\dimen@ii by 1\dimen@i
\ifdim\wd\boxA > \dimen@ii % If the entry doesn't fit in one line
\ifdim\dimen@ > 0.8\dimen@ii % due to long index text
- % Try to split the text roughly evenly. \dimen@ will be the length of
+ % Try to split the text roughly evenly. \dimen@ will be the length of
% the first line.
\dimen@ = 0.7\dimen@
\dimen@ii = \hsize
@@ -5892,7 +5892,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\newbox\balancedcolumns
\setbox\balancedcolumns=\vbox{shouldnt see this}%
%
-% Only called for the last of the double column material. \doublecolumnout
+% Only called for the last of the double column material. \doublecolumnout
% does the others.
\def\balancecolumns{%
\setbox0 = \vbox{\unvbox\PAGE}% like \box255 but more efficient, see p.120.
@@ -5920,7 +5920,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
}%
% Now the left column is in box 1, and the right column in box 3.
%
- % Check whether the left column has come out higher than the page itself.
+ % Check whether the left column has come out higher than the page itself.
% (Note that we have doubled \vsize for the double columns, so
% the actual height of the page is 0.5\vsize).
\ifdim2\ht1>\vsize
@@ -6217,7 +6217,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\let\top\unnumbered
% Sections.
-%
+%
\outer\parseargdef\numberedsec{\numhead1{#1}} % normally calls seczzz
\def\seczzz#1{%
\global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1
@@ -6240,7 +6240,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
}
% Subsections.
-%
+%
% normally calls numberedsubseczzz:
\outer\parseargdef\numberedsubsec{\numhead2{#1}}
\def\numberedsubseczzz#1{%
@@ -6265,7 +6265,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
}
% Subsubsections.
-%
+%
% normally numberedsubsubseczzz:
\outer\parseargdef\numberedsubsubsec{\numhead3{#1}}
\def\numberedsubsubseczzz#1{%
@@ -7327,7 +7327,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% @indentedblock is like @quotation, but indents only on the left and
% has no optional argument.
-%
+%
\makedispenvdef{indentedblock}{\indentedblockstart}
%
\def\indentedblockstart{%
@@ -7627,7 +7627,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% @deftypefnnewline on|off says whether the return type of typed functions
% are printed on their own line. This affects @deftypefn, @deftypefun,
% @deftypeop, and @deftypemethod.
-%
+%
\parseargdef\deftypefnnewline{%
\def\temp{#1}%
\ifx\temp\onword
@@ -7800,7 +7800,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\tclose{\temp}% typeset the return type
\ifrettypeownline
% put return type on its own line; prohibit line break following:
- \hfil\vadjust{\nobreak}\break
+ \hfil\vadjust{\nobreak}\break
\else
\space % type on same line, so just followed by a space
\fi
@@ -7949,7 +7949,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\scantokens{#1@comment}%
%
% The \comment is to remove the \newlinechar added by \scantokens, and
- % can be noticed by \parsearg. Note \c isn't used because this means
cedilla
+ % can be noticed by \parsearg. Note \c isn't used because this means cedilla
% in math mode.
}
@@ -8144,7 +8144,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% list to some hook where the argument is to be expanded. If there are
% less than 10 arguments that hook is to be replaced by ##N where N
% is the position in that list, that is to say the macro arguments are to be
-% defined `a la TeX in the macro body.
+% defined `a la TeX in the macro body.
%
% That gets used by \mbodybackslash (above).
%
@@ -8178,8 +8178,8 @@ might help (with 'rm \jobname.?? \jobname.??s')%
%
% Read recursive and nonrecursive macro bodies. (They're different since
% rec and nonrec macros end differently.)
-%
-% We are in \macrobodyctxt, and the \xdef causes backslashshes in the macro
+%
+% We are in \macrobodyctxt, and the \xdef causes backslashshes in the macro
% body to be transformed.
% Set \macrobody to the body of the macro, and call \defmacro.
%
@@ -8213,7 +8213,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% twice the \macarg.BLAH macros does not cost too much processing power.
\def\parsemmanyargdef@@#1,{%
\if#1;\let\next=\relax
- \else
+ \else
\let\next=\parsemmanyargdef@@
\edef\tempb{\eatspaces{#1}}%
\expandafter\def\expandafter\tempa
@@ -8298,7 +8298,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% Replace arguments by their values in the macro body, and place the result
% in macro \@tempa.
-%
+%
\def\macvalstoargs@{%
% To do this we use the property that token registers that are \the'ed
% within an \edef expand only once. So we are going to place all argument
@@ -8322,9 +8322,9 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\expandafter\def\expandafter\@tempa\expandafter{\@tempc}%
}
-% Define the named-macro outside of this group and then close this group.
-%
-\def\macargexpandinbody@{%
+% Define the named-macro outside of this group and then close this group.
+%
+\def\macargexpandinbody@{%
\expandafter
\endgroup
\macargdeflist@
@@ -8362,7 +8362,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
}
% Trailing missing arguments are set to empty.
-%
+%
\def\setemptyargvalues@{%
\ifx\paramlist\nilm@
\let\next\macargexpandinbody@
@@ -8439,7 +8439,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\else % at most 9
\ifnum\paramno<10\relax
% @MACNAME sets the context for reading the macro argument
- % @MACNAME@@ gets the argument, processes backslashes and appends a
+ % @MACNAME@@ gets the argument, processes backslashes and appends a
% comma.
% @MACNAME@@@ removes braces surrounding the argument list.
% @MACNAME@@@@ scans the macro body with arguments substituted.
@@ -8483,11 +8483,11 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% Call #1 with a list of tokens #2, with any doubled backslashes in #2
% compressed to one.
%
-% This implementation works by expansion, and not execution (so we cannot use
-% \def or similar). This reduces the risk of this failing in contexts where
-% complete expansion is done with no execution (for example, in writing out to
+% This implementation works by expansion, and not execution (so we cannot use
+% \def or similar). This reduces the risk of this failing in contexts where
+% complete expansion is done with no execution (for example, in writing out to
% an auxiliary file for an index entry).
-%
+%
% State is kept in the input stream: the argument passed to
% @look_ahead, @gobble_and_check_finish and @add_segment is
%
@@ -8509,11 +8509,11 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% #3 - NEXT_TOKEN
% #4 used to look ahead
%
-% If the next token is not a backslash, process the rest of the argument;
+% If the next token is not a backslash, process the rest of the argument;
% otherwise, remove the next token.
@gdef@look_ahead#1!#2#3#4{%
@ifx#4\%
- @expandafter@gobble_and_check_finish
+ @expandafter@gobble_and_check_finish
@else
@expandafter@add_segment
@fi#1!{#2}#4#4%
@@ -8537,9 +8537,9 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% #3 - NEXT_TOKEN
% #4 is input stream until next backslash
%
-% Input stream is either at the start of the argument, or just after a
-% backslash sequence, either a lone backslash, or a doubled backslash.
-% NEXT_TOKEN contains the first token in the input stream: if it is \finish,
+% Input stream is either at the start of the argument, or just after a
+% backslash sequence, either a lone backslash, or a doubled backslash.
+% NEXT_TOKEN contains the first token in the input stream: if it is \finish,
% finish; otherwise, append to ARG_RESULT the segment of the argument up until
% the next backslash. PENDING_BACKSLASH contains a backslash to represent
% a backslash just before the start of the input stream that has not been
@@ -8551,13 +8551,13 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% append the pending backslash to the result, followed by the next segment
@expandafter@is_fi@look_ahead#1#2#4!{\}@fi
% this @fi is discarded by @look_ahead.
- % we can't get rid of it with \expandafter because we don't know how
+ % we can't get rid of it with \expandafter because we don't know how
% long #4 is.
}
% #1 - THE_MACRO
% #2 - ARG_RESULT
-% #3 discards the res of the conditional in @add_segment, and @is_fi ends the
+% #3 discards the res of the conditional in @add_segment, and @is_fi ends the
% conditional.
@gdef@call_the_macro#1#2!#3@fi{@is_fi #1{#2}}
@@ -8569,7 +8569,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% for reading the argument (slightly different in the two cases). Then,
% to read the argument, in the whole-line case, it then calls the regular
% \parsearg MAC; in the lbrace case, it calls \passargtomacro MAC.
-%
+%
\def\braceorline#1{\let\macnamexxx=#1\futurelet\nchar\braceorlinexxx}
\def\braceorlinexxx{%
\ifx\nchar\bgroup
@@ -8623,7 +8623,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% Used so that the @top node doesn't have to be wrapped in an @ifnottex
% conditional.
-% \doignore goes to more effort to skip nested conditionals but we don't need
+% \doignore goes to more effort to skip nested conditionals but we don't need
% that here.
\def\omittopnode{%
\ifx\lastnode\wordTop
@@ -8700,7 +8700,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% automatically in xrefs, if the third arg is not explicitly specified.
% This was provided as a "secret" @set xref-automatic-section-title
% variable, now it's official.
-%
+%
\parseargdef\xrefautomaticsectiontitle{%
\def\temp{#1}%
\ifx\temp\onword
@@ -8716,7 +8716,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\fi\fi
}
-%
+%
% @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is
% the node name, #2 the name of the Info cross-reference, #3 the printed
% node name, #4 the name of the Info file, #5 the name of the printed
@@ -8869,24 +8869,24 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\fi
\else
% node/anchor (non-float) references.
- %
+ %
% If we use \unhbox to print the node names, TeX does not insert
% empty discretionaries after hyphens, which means that it will not
% find a line break at a hyphen in a node names. Since some manuals
% are best written with fairly long node names, containing hyphens,
% this is a loss. Therefore, we give the text of the node name
% again, so it is as if TeX is seeing it for the first time.
- %
+ %
\ifdim \wd\printedmanualbox > 0pt
% Cross-manual reference with a printed manual name.
- %
+ %
\crossmanualxref{\cite{\printedmanual\unskip}}%
%
\else\ifdim \wd\infofilenamebox > 0pt
% Cross-manual reference with only an info filename (arg 4), no
% printed manual name (arg 5). This is essentially the same as
% the case above; we output the filename, since we have nothing else.
- %
+ %
\crossmanualxref{\code{\infofilename\unskip}}%
%
\else
@@ -8925,20 +8925,20 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\space\putwordpage\tie\refx{#1-pg}}
% Output a cross-manual xref to #1. Used just above (twice).
-%
+%
% Only include the text "Section ``foo'' in" if the foo is neither
% missing or Top. Thus, @xref{,,,foo,The Foo Manual} outputs simply
% "see The Foo Manual", the idea being to refer to the whole manual.
-%
+%
% But, this being TeX, we can't easily compare our node name against the
% string "Top" while ignoring the possible spaces before and after in
% the input. By adding the arbitrary 7sp below, we make it much less
% likely that a real node name would have the same width as "Top" (e.g.,
% in a monospaced font). Hopefully it will never happen in practice.
-%
+%
% For the same basic reason, we retypeset the "Top" at every
% reference, since the current font is indeterminate.
-%
+%
\def\crossmanualxref#1{%
\setbox\toprefbox = \hbox{Top\kern7sp}%
\setbox2 = \hbox{\ignorespaces \printedrefname \unskip \kern7sp}%
@@ -9015,9 +9015,9 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\fi
}
-% This is the macro invoked by entries in the aux file. Define a control
-% sequence for a cross-reference target (we prepend XR to the control sequence
-% name to avoid collisions). The value is the page number. If this is a
float
+% This is the macro invoked by entries in the aux file. Define a control
+% sequence for a cross-reference target (we prepend XR to the control sequence
+% name to avoid collisions). The value is the page number. If this is a float
% type, we have more work to do.
%
\def\xrdef#1#2{%
@@ -9033,10 +9033,10 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\bgroup
\expandafter\gdef\csname XR\safexrefname\endcsname{#2}%
\egroup
- % We put the \gdef inside a group to avoid the definitions building up on
- % TeX's save stack, which can cause it to run out of space for aux files
with
+ % We put the \gdef inside a group to avoid the definitions building up on
+ % TeX's save stack, which can cause it to run out of space for aux files with
% thousands of lines. \gdef doesn't use the save stack, but \csname does
- % when it defines an unknown control sequence as \relax.
+ % when it defines an unknown control sequence as \relax.
%
% Was that xref control sequence that we just defined for a float?
\expandafter\iffloat\csname XR\safexrefname\endcsname
@@ -10233,7 +10233,7 @@ directory should work if nowhere else does.}
\uppercase{.}
\endgroup
\else
- \errhelp = \EMsimple
+ \errhelp = \EMsimple
\errmessage{Unicode character U+#1 not supported, sorry}%
\fi
\else
@@ -10266,7 +10266,7 @@ directory should work if nowhere else does.}
\countUTFz = "#1\relax
\begingroup
\parseXMLCharref
-
+
% Give \u8:... its definition. The sequence of seven \expandafter's
% expands after the \gdef three times, e.g.
%
@@ -10278,7 +10278,7 @@ directory should work if nowhere else does.}
\expandafter\expandafter
\expandafter\expandafter
\expandafter\gdef \UTFviiiTmp{#2}%
- %
+ %
\expandafter\ifx\csname uni:#1\endcsname \relax \else
\message{Internal error, already defined: #1}%
\fi
@@ -10317,7 +10317,7 @@ directory should work if nowhere else does.}
\divide\countUTFz by 64
\countUTFy = \countUTFz % Save to be the future value of \countUTFz.
\multiply\countUTFz by 64
-
+
% \countUTFz is now \countUTFx with the last 5 bits cleared. Subtract
% in order to get the last five bits.
\advance\countUTFx by -\countUTFz
@@ -10352,7 +10352,7 @@ directory should work if nowhere else does.}
% U+0080..U+00FF =
https://en.wikipedia.org/wiki/Latin-1_Supplement_(Unicode_block)
% U+0100..U+017F = https://en.wikipedia.org/wiki/Latin_Extended-A
% U+0180..U+024F = https://en.wikipedia.org/wiki/Latin_Extended-B
-%
+%
% Many of our renditions are less than wonderful, and all the missing
% characters are available somewhere. Loading the necessary fonts
% awaits user request. We can't truly support Unicode without
@@ -11597,7 +11597,7 @@ directory should work if nowhere else does.}
\def\texinfochars{%
\let< = \activeless
\let> = \activegtr
- \let~ = \activetilde
+ \let~ = \activetilde
\let^ = \activehat
\setregularquotes
\let\b = \strong
diff --git a/doc/ChangeLog b/doc/ChangeLog
index 183e5d65..4e4c1b14 100644
--- a/doc/ChangeLog
+++ b/doc/ChangeLog
@@ -1,3 +1,8 @@
+2023-02-05 Arnold D. Robbins <arnold@skeeve.com>
+
+ * texinfo.tex: Update from GNULIB. Only change is to remove
+ trailing whitespace.
+
2023-02-02 Arnold D. Robbins <arnold@skeeve.com>
* gawktexi.in (Getopt Function): Fix for parsing long
diff --git a/doc/texinfo.tex b/doc/texinfo.tex
index b4caf96e..3cccf01d 100644
--- a/doc/texinfo.tex
+++ b/doc/texinfo.tex
@@ -1,5 +1,5 @@
% texinfo.tex -- TeX macros to handle Texinfo files.
-%
+%
% Load plain if necessary, i.e., if running under initex.
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
%
@@ -212,7 +212,7 @@
% @errormsg{MSG}. Do the index-like expansions on MSG, but if things
% aren't perfect, it's not the end of the world, being an error message,
% after all.
-%
+%
\def\errormsg{\begingroup \indexnofonts \doerrormsg}
\def\doerrormsg#1{\errmessage{#1}}
@@ -426,7 +426,7 @@
}%
}
-% First remove any @comment, then any @c comment. Pass the result on to
+% First remove any @comment, then any @c comment. Pass the result on to
% \argcheckspaces.
\def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm}
\def\argremovec#1\c#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm}
@@ -1048,8 +1048,8 @@ where each line of input produces a line of output.}
end
end
}
- % The -2 in the arguments here gives all the input to TeX catcode 12
- % (other) or 10 (space), preventing undefined control sequence errors. See
+ % The -2 in the arguments here gives all the input to TeX catcode 12
+ % (other) or 10 (space), preventing undefined control sequence errors. See
% https://lists.gnu.org/archive/html/bug-texinfo/2019-08/msg00031.html
%
\endgroup
@@ -1143,7 +1143,7 @@ where each line of input produces a line of output.}
% for display in the outlines, and in other places. Thus, we have to
% double any backslashes. Otherwise, a name like "\node" will be
% interpreted as a newline (\n), followed by o, d, e. Not good.
-%
+%
% See http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html and
% related messages. The final outcome is that it is up to the TeX user
% to double the backslashes and otherwise make the string valid, so
@@ -1435,7 +1435,7 @@ output) for that.)}
% We use the node names as the destinations.
%
% Currently we prefix the section name with the section number
- % for chapter and appendix headings only in order to avoid too much
+ % for chapter and appendix headings only in order to avoid too much
% horizontal space being required in the PDF viewer.
\def\numchapentry##1##2##3##4{%
\dopdfoutline{##2 ##1}{count-\expnumber{chap##2}}{##3}{##4}}%
@@ -1458,7 +1458,7 @@ output) for that.)}
% their "best" equivalent, based on the @documentencoding. Too
% much work for too little return. Just use the ASCII equivalents
% we use for the index sort strings.
- %
+ %
\indexnofonts
\setupdatafile
% We can have normal brace characters in the PDF outlines, unlike
@@ -1684,7 +1684,7 @@ output) for that.)}
% We use node names as destinations.
%
% Currently we prefix the section name with the section number
- % for chapter and appendix headings only in order to avoid too much
+ % for chapter and appendix headings only in order to avoid too much
% horizontal space being required in the PDF viewer.
\def\partentry##1##2##3##4{}% ignore parts in the outlines
\def\numchapentry##1##2##3##4{%
@@ -2715,7 +2715,7 @@ end
}
% Commands to set the quote options.
-%
+%
\parseargdef\codequoteundirected{%
\def\temp{#1}%
\ifx\temp\onword
@@ -2756,7 +2756,7 @@ end
% If we are in a monospaced environment, however, 1) always use \ttsl,
% and 2) do not add an italic correction.
\def\dosmartslant#1#2{%
- \ifusingtt
+ \ifusingtt
{{\ttsl #2}\let\next=\relax}%
{\def\next{{#1#2}\smartitaliccorrection}}%
\next
@@ -2939,14 +2939,14 @@ end
\gdef\codedash{\futurelet\next\codedashfinish}
\gdef\codedashfinish{%
\normaldash % always output the dash character itself.
- %
+ %
% Now, output a discretionary to allow a line break, unless
% (a) the next character is a -, or
% (b) the preceding character is a -.
% E.g., given --posix, we do not want to allow a break after either -.
% Given --foo-bar, we do want to allow a break between the - and the b.
\ifx\next\codedash \else
- \ifx\codedashprev\codedash
+ \ifx\codedashprev\codedash
\else \discretionary{}{}{}\fi
\fi
% we need the space after the = for the case when \next itself is a
@@ -3036,7 +3036,7 @@ end
% For pdfTeX and LuaTeX
\ifurefurlonlylink
% PDF plus option to not display url, show just arg
- \unhbox0
+ \unhbox0
\else
% PDF, normally display both arg and url for consistency,
% visibility, if the pdf is eventually used to print, etc.
@@ -3049,7 +3049,7 @@ end
% For XeTeX
\ifurefurlonlylink
% PDF plus option to not display url, show just arg
- \unhbox0
+ \unhbox0
\else
% PDF, normally display both arg and url for consistency,
% visibility, if the pdf is eventually used to print, etc.
@@ -3107,10 +3107,10 @@ end
}
}
-% By default we'll break after the special characters, but some people like to
-% break before the special chars, so allow that. Also allow no breaking at
+% By default we'll break after the special characters, but some people like to
+% break before the special chars, so allow that. Also allow no breaking at
% all, for manual control.
-%
+%
\parseargdef\urefbreakstyle{%
\def\txiarg{#1}%
\ifx\txiarg\wordnone
@@ -3129,10 +3129,10 @@ end
\def\wordnone{none}
% Allow a ragged right output to aid breaking long URL's. There can
-% be a break at the \allowbreak with no extra glue (if the existing stretch in
+% be a break at the \allowbreak with no extra glue (if the existing stretch in
% the line is sufficient), a break at the \penalty with extra glue added
% at the end of the line, or no break at all here.
-% Changing the value of the penalty and/or the amount of stretch affects how
+% Changing the value of the penalty and/or the amount of stretch affects how
% preferable one choice is over the other.
\def\urefallowbreak{%
\penalty0\relax
@@ -3347,7 +3347,7 @@ $$%
% @inlinefmt{FMTNAME,PROCESSED-TEXT} and @inlineraw{FMTNAME,RAW-TEXT}.
% Ignore unless FMTNAME == tex; then it is like @iftex and @tex,
% except specified as a normal braced arg, so no newlines to worry about.
-%
+%
\def\outfmtnametex{tex}
%
\long\def\inlinefmt#1{\doinlinefmt #1,\finish}
@@ -3355,7 +3355,7 @@ $$%
\def\inlinefmtname{#1}%
\ifx\inlinefmtname\outfmtnametex \ignorespaces #2\fi
}
-%
+%
% @inlinefmtifelse{FMTNAME,THEN-TEXT,ELSE-TEXT} expands THEN-TEXT if
% FMTNAME is tex, else ELSE-TEXT.
\long\def\inlinefmtifelse#1{\doinlinefmtifelse #1,,,\finish}
@@ -3371,7 +3371,7 @@ $$%
% *right* brace they would have to use a command anyway, so they may as
% well use a command to get a left brace too. We could re-use the
% delimiter character idea from \verb, but it seems like overkill.
-%
+%
\long\def\inlineraw{\tex \doinlineraw}
\long\def\doinlineraw#1{\doinlinerawtwo #1,\finish}
\def\doinlinerawtwo#1,#2,\finish{%
@@ -3657,7 +3657,7 @@ $$%
% for non-CM glyphs. That is ec* for regular text and tc* for the text
% companion symbols (LaTeX TS1 encoding). Both are part of the ec
% package and follow the same conventions.
-%
+%
\def\ecfont{\etcfont{e}}
\def\tcfont{\etcfont{t}}
%
@@ -3739,7 +3739,7 @@ $$%
after the title page.}}%
\def\setshortcontentsaftertitlepage{%
\errmessage{@setshortcontentsaftertitlepage has been removed as a Texinfo
- command; move your @shortcontents and @contents commands if you
+ command; move your @shortcontents and @contents commands if you
want the contents after the title page.}}%
\parseargdef\shorttitlepage{%
@@ -3793,7 +3793,7 @@ $$%
% don't worry much about spacing, ragged right. This should be used
% inside a \vbox, and fonts need to be set appropriately first. \par should
% be specified before the end of the \vbox, since a vbox is a group.
-%
+%
\def\raggedtitlesettings{%
\rm
\hyphenpenalty=10000
@@ -4628,7 +4628,7 @@ $$%
% Like \expandablevalue, but completely expandable (the \message in the
% definition above operates at the execution level of TeX). Used when
% writing to auxiliary files, due to the expansion that \write does.
-% If flag is undefined, pass through an unexpanded @value command: maybe it
+% If flag is undefined, pass through an unexpanded @value command: maybe it
% will be set by the time it is read back in.
%
% NB flag names containing - or _ may not work here.
@@ -4652,7 +4652,7 @@ $$%
% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
% with @set.
-%
+%
% To get the special treatment we need for `@end ifset,' we call
% \makecond and then redefine.
%
@@ -4685,7 +4685,7 @@ $$%
% without the @) is in fact defined. We can only feasibly check at the
% TeX level, so something like `mathcode' is going to considered
% defined even though it is not a Texinfo command.
-%
+%
\makecond{ifcommanddefined}
\def\ifcommanddefined{\parsearg{\doifcmddefined{\let\next=\ifcmddefinedfail}}}
%
@@ -4793,7 +4793,7 @@ $$%
\def\docodeindex#1{\edef\indexname{#1}\parsearg\docodeindexxxx}
\def\docodeindexxxx #1{\docind{\indexname}{#1}}
-
+
% \definedummyword defines \#1 as \string\#1\space, thus effectively
% preventing its expansion. This is used only for control words,
% not control letters, because the \space would be incorrect for
@@ -4810,7 +4810,7 @@ $$%
\def\definedummyword #1{\def#1{\string#1\space}}%
\def\definedummyletter#1{\def#1{\string#1}}%
-% Used for the aux, toc and index files to prevent expansion of Texinfo
+% Used for the aux, toc and index files to prevent expansion of Texinfo
% commands. Most of the commands are controlled through the
% \ifdummies conditional.
%
@@ -5102,7 +5102,7 @@ $$%
\let\value\indexnofontsvalue
}
-
+
% #1 is the index name, #2 is the entry text.
@@ -5143,7 +5143,7 @@ $$%
\ifx\suffix\indexisfl\def\suffix{f1}\fi
% Open the file
\immediate\openout\csname#1indfile\endcsname \jobname.\suffix
- % Using \immediate above here prevents an object entering into the current
+ % Using \immediate above here prevents an object entering into the current
% box, which could confound checks such as those in \safewhatsit for
% preceding skips.
\typeout{Writing index file \jobname.\suffix}%
@@ -5195,7 +5195,7 @@ $$%
\ifx\segment\isfinish
\else
%
- % Fully expand the segment, throwing away any @sortas directives, and
+ % Fully expand the segment, throwing away any @sortas directives, and
% trim spaces.
\edef\trimmed{\segment}%
\edef\trimmed{\expandafter\eatspaces\expandafter{\trimmed}}%
@@ -5259,12 +5259,12 @@ $$%
% the current value of \escapechar.
\def\escapeisbackslash{\escapechar=`\\}
-% Use \ in index files by default. texi2dvi didn't support @ as the escape
-% character (as it checked for "\entry" in the files, and not "@entry"). When
-% the new version of texi2dvi has had a chance to become more prevalent, then
-% the escape character can change back to @ again. This should be an easy
-% change to make now because both @ and \ are only used as escape characters
in
-% index files, never standing for themselves.
+% Use \ in index files by default. texi2dvi didn't support @ as the escape
+% character (as it checked for "\entry" in the files, and not "@entry"). When
+% the new version of texi2dvi has had a chance to become more prevalent, then
+% the escape character can change back to @ again. This should be an easy
+% change to make now because both @ and \ are only used as escape characters in
+% index files, never standing for themselves.
%
\set txiindexescapeisbackslash
@@ -5287,7 +5287,7 @@ $$%
\def\}{\rbracechar{}}%
\uccode`\~=`\\ \uppercase{\def~{\backslashchar{}}}%
%
- % Split the entry into primary entry and any subentries, and get the index
+ % Split the entry into primary entry and any subentries, and get the index
% sort key.
\splitindexentry\indextext
%
@@ -5468,18 +5468,18 @@ $$%
\uccode`\~=`\\ \uppercase{\if\noexpand~}\noexpand#1
\ifflagclear{txiskipindexfileswithbackslash}{%
\errmessage{%
-ERROR: A sorted index file in an obsolete format was skipped.
+ERROR: A sorted index file in an obsolete format was skipped.
To fix this problem, please upgrade your version of 'texi2dvi'
or 'texi2pdf' to that at <https://ftp.gnu.org/gnu/texinfo>.
-If you are using an old version of 'texindex' (part of the Texinfo
+If you are using an old version of 'texindex' (part of the Texinfo
distribution), you may also need to upgrade to a newer version (at least 6.0).
You may be able to typeset the index if you run
'texindex \jobname.\indexname' yourself.
-You could also try setting the 'txiindexescapeisbackslash' flag by
+You could also try setting the 'txiindexescapeisbackslash' flag by
running a command like
-'texi2dvi -t "@set txiindexescapeisbackslash" \jobname.texi'. If you do
+'texi2dvi -t "@set txiindexescapeisbackslash" \jobname.texi'. If you do
this, Texinfo will try to use index files in the old format.
-If you continue to have problems, deleting the index files and starting again
+If you continue to have problems, deleting the index files and starting again
might help (with 'rm \jobname.?? \jobname.??s')%
}%
}{%
@@ -5552,7 +5552,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% bottom of a column to reduce an increase in inter-line spacing.
\nobreak
\vskip 0pt plus 5\baselineskip
- \penalty -300
+ \penalty -300
\vskip 0pt plus -5\baselineskip
%
% Typeset the initial. Making this add up to a whole number of
@@ -5684,7 +5684,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\advance\dimen@ii by 1\dimen@i
\ifdim\wd\boxA > \dimen@ii % If the entry doesn't fit in one line
\ifdim\dimen@ > 0.8\dimen@ii % due to long index text
- % Try to split the text roughly evenly. \dimen@ will be the length of
+ % Try to split the text roughly evenly. \dimen@ will be the length of
% the first line.
\dimen@ = 0.7\dimen@
\dimen@ii = \hsize
@@ -5892,7 +5892,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\newbox\balancedcolumns
\setbox\balancedcolumns=\vbox{shouldnt see this}%
%
-% Only called for the last of the double column material. \doublecolumnout
+% Only called for the last of the double column material. \doublecolumnout
% does the others.
\def\balancecolumns{%
\setbox0 = \vbox{\unvbox\PAGE}% like \box255 but more efficient, see p.120.
@@ -5920,7 +5920,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
}%
% Now the left column is in box 1, and the right column in box 3.
%
- % Check whether the left column has come out higher than the page itself.
+ % Check whether the left column has come out higher than the page itself.
% (Note that we have doubled \vsize for the double columns, so
% the actual height of the page is 0.5\vsize).
\ifdim2\ht1>\vsize
@@ -6217,7 +6217,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\let\top\unnumbered
% Sections.
-%
+%
\outer\parseargdef\numberedsec{\numhead1{#1}} % normally calls seczzz
\def\seczzz#1{%
\global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1
@@ -6240,7 +6240,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
}
% Subsections.
-%
+%
% normally calls numberedsubseczzz:
\outer\parseargdef\numberedsubsec{\numhead2{#1}}
\def\numberedsubseczzz#1{%
@@ -6265,7 +6265,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
}
% Subsubsections.
-%
+%
% normally numberedsubsubseczzz:
\outer\parseargdef\numberedsubsubsec{\numhead3{#1}}
\def\numberedsubsubseczzz#1{%
@@ -7327,7 +7327,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% @indentedblock is like @quotation, but indents only on the left and
% has no optional argument.
-%
+%
\makedispenvdef{indentedblock}{\indentedblockstart}
%
\def\indentedblockstart{%
@@ -7627,7 +7627,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% @deftypefnnewline on|off says whether the return type of typed functions
% are printed on their own line. This affects @deftypefn, @deftypefun,
% @deftypeop, and @deftypemethod.
-%
+%
\parseargdef\deftypefnnewline{%
\def\temp{#1}%
\ifx\temp\onword
@@ -7800,7 +7800,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\tclose{\temp}% typeset the return type
\ifrettypeownline
% put return type on its own line; prohibit line break following:
- \hfil\vadjust{\nobreak}\break
+ \hfil\vadjust{\nobreak}\break
\else
\space % type on same line, so just followed by a space
\fi
@@ -7949,7 +7949,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\scantokens{#1@comment}%
%
% The \comment is to remove the \newlinechar added by \scantokens, and
- % can be noticed by \parsearg. Note \c isn't used because this means
cedilla
+ % can be noticed by \parsearg. Note \c isn't used because this means cedilla
% in math mode.
}
@@ -8144,7 +8144,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% list to some hook where the argument is to be expanded. If there are
% less than 10 arguments that hook is to be replaced by ##N where N
% is the position in that list, that is to say the macro arguments are to be
-% defined `a la TeX in the macro body.
+% defined `a la TeX in the macro body.
%
% That gets used by \mbodybackslash (above).
%
@@ -8178,8 +8178,8 @@ might help (with 'rm \jobname.?? \jobname.??s')%
%
% Read recursive and nonrecursive macro bodies. (They're different since
% rec and nonrec macros end differently.)
-%
-% We are in \macrobodyctxt, and the \xdef causes backslashshes in the macro
+%
+% We are in \macrobodyctxt, and the \xdef causes backslashshes in the macro
% body to be transformed.
% Set \macrobody to the body of the macro, and call \defmacro.
%
@@ -8213,7 +8213,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% twice the \macarg.BLAH macros does not cost too much processing power.
\def\parsemmanyargdef@@#1,{%
\if#1;\let\next=\relax
- \else
+ \else
\let\next=\parsemmanyargdef@@
\edef\tempb{\eatspaces{#1}}%
\expandafter\def\expandafter\tempa
@@ -8298,7 +8298,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% Replace arguments by their values in the macro body, and place the result
% in macro \@tempa.
-%
+%
\def\macvalstoargs@{%
% To do this we use the property that token registers that are \the'ed
% within an \edef expand only once. So we are going to place all argument
@@ -8322,9 +8322,9 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\expandafter\def\expandafter\@tempa\expandafter{\@tempc}%
}
-% Define the named-macro outside of this group and then close this group.
-%
-\def\macargexpandinbody@{%
+% Define the named-macro outside of this group and then close this group.
+%
+\def\macargexpandinbody@{%
\expandafter
\endgroup
\macargdeflist@
@@ -8362,7 +8362,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
}
% Trailing missing arguments are set to empty.
-%
+%
\def\setemptyargvalues@{%
\ifx\paramlist\nilm@
\let\next\macargexpandinbody@
@@ -8439,7 +8439,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\else % at most 9
\ifnum\paramno<10\relax
% @MACNAME sets the context for reading the macro argument
- % @MACNAME@@ gets the argument, processes backslashes and appends a
+ % @MACNAME@@ gets the argument, processes backslashes and appends a
% comma.
% @MACNAME@@@ removes braces surrounding the argument list.
% @MACNAME@@@@ scans the macro body with arguments substituted.
@@ -8483,11 +8483,11 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% Call #1 with a list of tokens #2, with any doubled backslashes in #2
% compressed to one.
%
-% This implementation works by expansion, and not execution (so we cannot use
-% \def or similar). This reduces the risk of this failing in contexts where
-% complete expansion is done with no execution (for example, in writing out to
+% This implementation works by expansion, and not execution (so we cannot use
+% \def or similar). This reduces the risk of this failing in contexts where
+% complete expansion is done with no execution (for example, in writing out to
% an auxiliary file for an index entry).
-%
+%
% State is kept in the input stream: the argument passed to
% @look_ahead, @gobble_and_check_finish and @add_segment is
%
@@ -8509,11 +8509,11 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% #3 - NEXT_TOKEN
% #4 used to look ahead
%
-% If the next token is not a backslash, process the rest of the argument;
+% If the next token is not a backslash, process the rest of the argument;
% otherwise, remove the next token.
@gdef@look_ahead#1!#2#3#4{%
@ifx#4\%
- @expandafter@gobble_and_check_finish
+ @expandafter@gobble_and_check_finish
@else
@expandafter@add_segment
@fi#1!{#2}#4#4%
@@ -8537,9 +8537,9 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% #3 - NEXT_TOKEN
% #4 is input stream until next backslash
%
-% Input stream is either at the start of the argument, or just after a
-% backslash sequence, either a lone backslash, or a doubled backslash.
-% NEXT_TOKEN contains the first token in the input stream: if it is \finish,
+% Input stream is either at the start of the argument, or just after a
+% backslash sequence, either a lone backslash, or a doubled backslash.
+% NEXT_TOKEN contains the first token in the input stream: if it is \finish,
% finish; otherwise, append to ARG_RESULT the segment of the argument up until
% the next backslash. PENDING_BACKSLASH contains a backslash to represent
% a backslash just before the start of the input stream that has not been
@@ -8551,13 +8551,13 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% append the pending backslash to the result, followed by the next segment
@expandafter@is_fi@look_ahead#1#2#4!{\}@fi
% this @fi is discarded by @look_ahead.
- % we can't get rid of it with \expandafter because we don't know how
+ % we can't get rid of it with \expandafter because we don't know how
% long #4 is.
}
% #1 - THE_MACRO
% #2 - ARG_RESULT
-% #3 discards the res of the conditional in @add_segment, and @is_fi ends the
+% #3 discards the res of the conditional in @add_segment, and @is_fi ends the
% conditional.
@gdef@call_the_macro#1#2!#3@fi{@is_fi #1{#2}}
@@ -8569,7 +8569,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% for reading the argument (slightly different in the two cases). Then,
% to read the argument, in the whole-line case, it then calls the regular
% \parsearg MAC; in the lbrace case, it calls \passargtomacro MAC.
-%
+%
\def\braceorline#1{\let\macnamexxx=#1\futurelet\nchar\braceorlinexxx}
\def\braceorlinexxx{%
\ifx\nchar\bgroup
@@ -8623,7 +8623,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% Used so that the @top node doesn't have to be wrapped in an @ifnottex
% conditional.
-% \doignore goes to more effort to skip nested conditionals but we don't need
+% \doignore goes to more effort to skip nested conditionals but we don't need
% that here.
\def\omittopnode{%
\ifx\lastnode\wordTop
@@ -8700,7 +8700,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% automatically in xrefs, if the third arg is not explicitly specified.
% This was provided as a "secret" @set xref-automatic-section-title
% variable, now it's official.
-%
+%
\parseargdef\xrefautomaticsectiontitle{%
\def\temp{#1}%
\ifx\temp\onword
@@ -8716,7 +8716,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\fi\fi
}
-%
+%
% @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is
% the node name, #2 the name of the Info cross-reference, #3 the printed
% node name, #4 the name of the Info file, #5 the name of the printed
@@ -8869,24 +8869,24 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\fi
\else
% node/anchor (non-float) references.
- %
+ %
% If we use \unhbox to print the node names, TeX does not insert
% empty discretionaries after hyphens, which means that it will not
% find a line break at a hyphen in a node names. Since some manuals
% are best written with fairly long node names, containing hyphens,
% this is a loss. Therefore, we give the text of the node name
% again, so it is as if TeX is seeing it for the first time.
- %
+ %
\ifdim \wd\printedmanualbox > 0pt
% Cross-manual reference with a printed manual name.
- %
+ %
\crossmanualxref{\cite{\printedmanual\unskip}}%
%
\else\ifdim \wd\infofilenamebox > 0pt
% Cross-manual reference with only an info filename (arg 4), no
% printed manual name (arg 5). This is essentially the same as
% the case above; we output the filename, since we have nothing else.
- %
+ %
\crossmanualxref{\code{\infofilename\unskip}}%
%
\else
@@ -8925,20 +8925,20 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\space\putwordpage\tie\refx{#1-pg}}
% Output a cross-manual xref to #1. Used just above (twice).
-%
+%
% Only include the text "Section ``foo'' in" if the foo is neither
% missing or Top. Thus, @xref{,,,foo,The Foo Manual} outputs simply
% "see The Foo Manual", the idea being to refer to the whole manual.
-%
+%
% But, this being TeX, we can't easily compare our node name against the
% string "Top" while ignoring the possible spaces before and after in
% the input. By adding the arbitrary 7sp below, we make it much less
% likely that a real node name would have the same width as "Top" (e.g.,
% in a monospaced font). Hopefully it will never happen in practice.
-%
+%
% For the same basic reason, we retypeset the "Top" at every
% reference, since the current font is indeterminate.
-%
+%
\def\crossmanualxref#1{%
\setbox\toprefbox = \hbox{Top\kern7sp}%
\setbox2 = \hbox{\ignorespaces \printedrefname \unskip \kern7sp}%
@@ -9015,9 +9015,9 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\fi
}
-% This is the macro invoked by entries in the aux file. Define a control
-% sequence for a cross-reference target (we prepend XR to the control sequence
-% name to avoid collisions). The value is the page number. If this is a
float
+% This is the macro invoked by entries in the aux file. Define a control
+% sequence for a cross-reference target (we prepend XR to the control sequence
+% name to avoid collisions). The value is the page number. If this is a float
% type, we have more work to do.
%
\def\xrdef#1#2{%
@@ -9033,10 +9033,10 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\bgroup
\expandafter\gdef\csname XR\safexrefname\endcsname{#2}%
\egroup
- % We put the \gdef inside a group to avoid the definitions building up on
- % TeX's save stack, which can cause it to run out of space for aux files
with
+ % We put the \gdef inside a group to avoid the definitions building up on
+ % TeX's save stack, which can cause it to run out of space for aux files with
% thousands of lines. \gdef doesn't use the save stack, but \csname does
- % when it defines an unknown control sequence as \relax.
+ % when it defines an unknown control sequence as \relax.
%
% Was that xref control sequence that we just defined for a float?
\expandafter\iffloat\csname XR\safexrefname\endcsname
@@ -10233,7 +10233,7 @@ directory should work if nowhere else does.}
\uppercase{.}
\endgroup
\else
- \errhelp = \EMsimple
+ \errhelp = \EMsimple
\errmessage{Unicode character U+#1 not supported, sorry}%
\fi
\else
@@ -10266,7 +10266,7 @@ directory should work if nowhere else does.}
\countUTFz = "#1\relax
\begingroup
\parseXMLCharref
-
+
% Give \u8:... its definition. The sequence of seven \expandafter's
% expands after the \gdef three times, e.g.
%
@@ -10278,7 +10278,7 @@ directory should work if nowhere else does.}
\expandafter\expandafter
\expandafter\expandafter
\expandafter\gdef \UTFviiiTmp{#2}%
- %
+ %
\expandafter\ifx\csname uni:#1\endcsname \relax \else
\message{Internal error, already defined: #1}%
\fi
@@ -10317,7 +10317,7 @@ directory should work if nowhere else does.}
\divide\countUTFz by 64
\countUTFy = \countUTFz % Save to be the future value of \countUTFz.
\multiply\countUTFz by 64
-
+
% \countUTFz is now \countUTFx with the last 5 bits cleared. Subtract
% in order to get the last five bits.
\advance\countUTFx by -\countUTFz
@@ -10352,7 +10352,7 @@ directory should work if nowhere else does.}
% U+0080..U+00FF =
https://en.wikipedia.org/wiki/Latin-1_Supplement_(Unicode_block)
% U+0100..U+017F = https://en.wikipedia.org/wiki/Latin_Extended-A
% U+0180..U+024F = https://en.wikipedia.org/wiki/Latin_Extended-B
-%
+%
% Many of our renditions are less than wonderful, and all the missing
% characters are available somewhere. Loading the necessary fonts
% awaits user request. We can't truly support Unicode without
@@ -11597,7 +11597,7 @@ directory should work if nowhere else does.}
\def\texinfochars{%
\let< = \activeless
\let> = \activegtr
- \let~ = \activetilde
+ \let~ = \activetilde
\let^ = \activehat
\setregularquotes
\let\b = \strong
-----------------------------------------------------------------------
Summary of changes:
build-aux/ChangeLog | 7 +
build-aux/ar-lib | 2 +-
build-aux/compile | 2 +-
build-aux/config.guess | 6 +-
build-aux/config.rpath | 2 +-
build-aux/config.sub | 8 +-
build-aux/depcomp | 2 +-
build-aux/texinfo.tex | 204 +++++++++++++++---------------
doc/ChangeLog | 5 +
doc/texinfo.tex | 204 +++++++++++++++---------------
support/ChangeLog | 11 ++
support/cdefs.h | 42 +++---
support/dfa.c | 13 +-
support/dfa.h | 2 +-
support/dynarray.h | 2 +-
support/flexmember.h | 2 +-
support/idx.h | 2 +-
support/intprops.h | 2 +-
support/libc-config.h | 24 ++--
support/localeinfo.c | 2 +-
support/localeinfo.h | 2 +-
support/malloc/dynarray-skeleton.c | 2 +-
support/malloc/dynarray.h | 2 +-
support/malloc/dynarray_at_failure.c | 2 +-
support/malloc/dynarray_emplace_enlarge.c | 2 +-
support/malloc/dynarray_finalize.c | 2 +-
support/malloc/dynarray_resize.c | 2 +-
support/malloc/dynarray_resize_clear.c | 2 +-
support/regcomp.c | 2 +-
support/regex.c | 2 +-
support/regex.h | 2 +-
support/regex_internal.c | 2 +-
support/regex_internal.h | 2 +-
support/regexec.c | 2 +-
support/verify.h | 45 +++++--
35 files changed, 341 insertions(+), 276 deletions(-)
hooks/post-receive
--
gawk
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [SCM] gawk branch, gawk-5.2-stable, updated. gawk-4.1.0-4990-gef06cfd9,
Arnold Robbins <=