Re: [Gnash-dev] gnash on Mac OS X

[Thomas Inskip]

OK.  I tried that.  I installed gtk (fink), and kde (darwinports, the  
one on fink appears to be broken).  The new failure I got was:

/bin/sh ../libtool --tag=CXX --mode=link g++  -g -O2 - 
D_THREAD_SAFE      -W     -Wall     -Wcast-align     -Wcast-qual     - 
Wpointer-arith     -Wreturn-type      -L/opt/local/lib -lglib-2.0 - 
lintl -liconv   -lltdl -L/opt/local/lib -L/opt/local/lib -lavcodec -L/ 
opt/local/lib -lavformat -lavcodec -lz -lavutil   -L/opt/local/lib - 
lavutil   -L/opt/local/lib -lavcodec -lz -lavutil   -lcurl -lxml2  -L/ 
sw/lib -lboost_date_time -lboost_thread -lpthread   -L/opt/local/lib - 
L/opt/local/lib -lavcodec -L/opt/local/lib -lavformat -lavcodec -lz - 
lavutil   -L/opt/local/lib -lavutil   -L/opt/local/lib -lavcodec -lz - 
lavutil     -o libgnashgtk_ogl.la -rpath /usr/local/lib/gnash/plugins  
-release cvs libgnashgtk_ogl_la-gtk_glue_gtkglext.lo  
libgnashgtk_ogl_la-gtk.lo ../backend/libgnashogl.la -L/opt/local/lib - 
L/usr/X11R6/lib -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 - 
lgdk_pixbuf-2.0 -ltiff -ljpeg -lm -lpangocairo-1.0 -lpango-1.0 - 
lcairo -lSM -lICE -lgobject-2.0 -lgmodule-2.0 -lglib-2.0 -lintl - 
liconv -lfreetype -lz -lfontconfig -lexpat -lpng12 -lXrender -lX11   - 
L/sw/lib -lgtkglext-x11-1.0 -lgdkglext-x11-1.0  -L/opt/local/lib - 
lpangox-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -lglib-2.0 -lintl  
-liconv   -L/opt/local/lib -latk-1.0 -lgobject-2.0 -lgmodule-2.0 - 
lglib-2.0 -lintl -liconv   -L/opt/local/lib -lglib-2.0 -lintl - 
liconv   -L/sw/lib -lexpat  -lm
grep: /sw/lib/libgtk-x11-2.0.la: No such file or directory
sed: /sw/lib/libgtk-x11-2.0.la: No such file or directory
libtool: link: `/sw/lib/libgtk-x11-2.0.la' is not a valid libtool  
archive
make[3]: *** [libgnashgtk_ogl.la] Error 1
make[2]: *** [all] Error 2
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2

My configuration options were as follows:
./configure --enable-gui=gtk --with-agg-incl=../agg-2.5/include -- 
with-agg-lib=../agg-2.5/src --with-ffmpeg-incl=/opt/local/include -- 
with-ffmpeg-lib=/opt/local/lib --with-kde-incl=/opt/local/include -- 
with-kde-lib=/opt/local/lib

Am I using the wrong version of gtk perhaps?  I have a libgtk- 
x11-2.0.0.dylib, but no libgtk-x11-2.0.la



On Aug 6, 2007, at 5:02 PM, Markus Gothe wrote:

> AGG isn't supported on Aqua yet... you should use --enable-gui=gtk  
> instead until I've finished the aqua gui.
>
> //Markus
>
> On 06 Aug, 2007, at 22:01 , Thomas Inskip wrote:
>
> > Hi.  I am still having problems getting gnash to build.  I will  
> > summarize what I've done so far:
> >
> > I am working from HEAD off cvs.
> >
> > Installed the following using fink:
> > boost1.33
> > automake
> > gtk+2
> > gtkglext1
> > sdl
> > sdl-image
> > sdl-mixer
> >
> > Built  agg 2.5.
> >
> > Installed ffmpeg 0.4.9 using darwinports because by default it  
> > builds static libraries only, and apparently gnash wants dynamic  
> > ones (darwinports does whatever patching is necessary).
> >
> > Then configured, built (from gnash directory):
> > export NO_LIBTOOLIZE=1
> > mv ltmain.sh.darwin ltmain.sh
> > ./autogen.sh
> > ./configure --disable-klash --enable-gui=aqua --with-agg-incl=../ 
> > agg-2.5/include --with-agg-lib=../agg-2.5/src --with-ffmpeg-incl=/ 
> > opt/local/include --with-ffmpeg-lib=/opt/local/lib
> >
> > The build fails at this point:
> > /bin/sh ../libtool --tag=CXX --mode=link g++  -g -O2 - 
> > D_THREAD_SAFE      -W     -Wall     -Wcast-align     -Wcast- 
> > qual     -Wpointer-arith     -Wreturn-type       -lltdl -L/opt/ 
> > local/lib -L/opt/local/lib -lavcodec -L/opt/local/lib -lavformat - 
> > lavcodec -lz -lavutil   -L/opt/local/lib -lavutil   -L/opt/local/ 
> > lib -lavcodec -lz -lavutil   -L/opt/local/lib -lxml2  -L/sw/lib - 
> > lboost_date_time -lboost_thread -lpthread   -L/opt/local/lib -L/ 
> > opt/local/lib -lavcodec -L/opt/local/lib -lavformat -lavcodec -lz - 
> > lavutil   -L/opt/local/lib -lavutil   -L/opt/local/lib -lavcodec - 
> > lz -lavutil     -o gnash -lltdl -export-dynamic  gnash.o  
> > libgnashgui.la libgnashplayer.la  ../libamf/libgnashamf.la ../ 
> > backend/libgnashbackend.la ../server/libgnashserver.la ../ 
> > libgeometry/libgnashgeo.la ../libbase/libgnashbase.la   
> > libgnashaqua_ogl.la  -framework Carbon -framework  
> > ApplicationServices -framework OpenGL -framework AGL        
> > libgnashaqua_agg.la  -L/Users/tomas/Develop/agg-2.5/src -lagg       
> > -lltdl -L/opt/local/lib -L/opt/local/lib -lavcodec -L/opt/local/ 
> > lib -lavformat -lavcodec -lz -lavutil   -L/opt/local/lib - 
> > lavutil   -L/opt/local/lib -lavcodec -lz -lavutil   -L/opt/local/ 
> > lib -lxml2  -L/sw/lib -lboost_date_time -lboost_thread -lpthread    
> > -L/opt/local/lib -L/opt/local/lib -lavcodec -L/opt/local/lib - 
> > lavformat -lavcodec -lz -lavutil   -L/opt/local/lib -lavutil   -L/ 
> > opt/local/lib -lavcodec -lz -lavutil    -lm
> > libtool: link: cannot find the library `libgnashaqua_agg.la' or  
> > unhandled argument `libgnashaqua_agg.la'
> >
> > During configure, there is also a message (not a warning or error)  
> > about the installed version of libcurl not supporting rtmp.  Now,  
> > rtmp is a streaming protocol.  Where does curl come in for that?   
> > Perhaps it's really rtmpt?
> >
> > Thanks for your help.
> >
> >
> > On Jul 30, 2007, at 4:10 PM, strk wrote:
> >
> > > On Mon, Jul 30, 2007 at 03:52:33PM -0400, Thomas Inskip wrote:
> > > > There are definitely a lot of warnings, and possibly errors.  Here
> > > > are a few:
> > > > Makefile.am:35: variable `NULL' not defined
> > >
> > > Install a newer automake. What version are you running now ?
> > >
> > > --strk;