On Wed, Jan 21, 2009 at 1:33 AM, Graziano Sorbaioli
<address@hidden> wrote:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Finally, thanks to a HUGE help from "D--", a #beijinglug hero, I
managed to install Debian into the Lemote Yeeloong.
Here is D--'s website:
http://cinnamonpirate.com/
Feel free to say thanks. :)
Here are the instructions:
0. Download the debian loongson image:
http://bjlx.org.cn/loongson/loongson2_debian5_20090108.tar.bz2
1. Use gparted to format a partition on a USB disk to ext3.
2. Mount it, change to the folder inside the usb /, and run `tar xjpvf
/yourpath/loongson2_debian5_20090108.tar.bz2
3. Open /media/YOUR_NEW_EXT3/etc/fstab and comment out all lines except
proc.
4. Run `sync`. Be patient. Remove your USB disk.
5. Start the Yeelong. Open terminal. Remount / as rw instead of ro this way:
mount -o remount, rw /
6. Edit /boot/boot.cfg. Make sure it has "showmenu 1". Add these lines.
title Debian on Yeeloong
kernel /dev/fs/address@hidden/boot/vmlinux-yeeloong
args console=tty root=/dev/sda1 no_auto_cmd rootdelay=10
7. Power down. Plug in your USB key.
8. Press DEL.
At the pmon prompt write:
load /dev/fs/address@hidden/boot/vmlinux-yeeloong
g console=tty root=/dev/sda1 no_auto_cmd rootdelay=10
Then the system will boot into your new shining debian. :)
D-- suggested:
If you get a kernel panic about not being able to mount root (/), check
if it is mapping it as sda. The supplied kernel has a quirk where it
mounts and unmounts the device creating it as sdb the second time. My
new kernel for medan doesn't have this problem.
If you continue to have trouble, I suggest trying a USB hard disk, not a
USB stick. I've had a lot of bad experiences with sticks flaking out and
writing 0s inside of files. A USB hard disk will not have this problem.
THANKS D--.
- --
Graziano Sorbaioli -- www.sorbaioli.org
========================================================================
Join the Free Software Foundation: http://www.fsf.org/jf?referrer=7201
Supporters will receive our new USB membership card with gNewSense Live
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)
iEYEARECAAYFAkl2CtAACgkQTtn97LA90HMAEwCgnFpQoyCLkvIpBuG0KiQ3aJ06
NMcAoNTr7/VpntmnTBkzjmc+8T3rmqKh
=bYco
-----END PGP SIGNATURE-----
_______________________________________________
gNewSense-dev mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/gnewsense-dev