Re: What is the correct sequence?

[Eduardo Garcia]

Hi Bozo!
I found my fail.
I added a 10 ms delay between steps 3 and 4 and the interface works fine!

Thanks again the help,
Eduardo Garcia


----- Original Message ----- 
From: "BORBELY Zoltan" <address@hidden>
To: "Eduardo Garcia" <address@hidden>; "Discussion forum for gnokii
users." <address@hidden>
Sent: Monday, July 21, 2003 1:31 PM
Subject: Re: What is the correct sequence?


> Hi,
>
> Sorry for the huge delay, but I'm quite busy in these days... :-(
>
> On Mon, May 12, 2003 at 01:17:16PM -0300, Eduardo Garcia wrote:
> > Hi friends,
> >     Please, what I neet to send to TDMA 6160 cell phone through MBUS in
the
> > follow sequence?
> >
> > 1- PC to Phone -> Command: 0xd1: s Key press { 0x50, 0x00, 0x01, KEY }.
> > 2- Phone to PC -> ACK.
> > 3- Phone to PC -> Command: 0xd2: r Key press {+0x01, 0x00, 0x50, 0x00}.
> > 4- ??? What I need to response to cell phone here?? I was trying to send
an
> > ack, but the cell phone continue
> > sending the D2 command like the correct response was omitted.
>
> I have no TDMA or CDMA phone, so this is just some random idea: maybe
> you have to send another 0x50 code message. But you can look into the
> nk6100.c driver too. I implemented another key press / release function
> for older phones some month ago. It uses two 0xd1 type messages, look
> into the PressOrReleaseKey2 function.
>
> Bye,
> Bozo
>


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.501 / Virus Database: 299 - Release Date: 14/07/03