Re: New with my Motorola C333

[Fernando Gabriel Barceló Tomás]

Well, my phone is connected and working.

I've got the status, and the command line gnokii --identify gives me a
lot of information.

But when I check the phonebook, it retrives only the numbers, no one
name, and only some of them (The ones that are stored in the sim card)
and report that they are stored on the phone.

¿Any idea?

El dom, 14-03-2004 a las 07:01, Ron Yorston escribió:
> Fernando Gabriel wrote:
> >But it seems that /dev/ttyACM0 is doesnt linked to the phone.
> >
> >I must change handly some usb configuration?
> 
> Hmm, maybe.  I'm not sure what you need to do to make it work in
> Debian.  On my Fedora system the necessary driver is loaded when
> I plug in the cable.  Here's the relevant part of the output from
> the dmesg command:
> 
>    hub.c: connect-debounce failed, port 1 disabled
>    hub.c: new USB device 00:07.2-1, assigned address 2
>    usb.c: USB device 2 (vend/prod 0x22b8/0x5802) is not claimed by any active 
> driver.
>    usb-uhci.c: ENXIO 80000280, flags 0, urb c07f7e00, burb c07f7f00
>    usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 9 ret -6
>    usb.c: registered new driver acm
>    ttyACM0: USB ACM device
>    acm.c: v0.21:USB Abstract Control Model driver for USB modems and ISDN 
> adapters
> 
> The acm driver is loaded and ttyACM0 is assigned.
> 
> Ron
> 
> 
> _______________________________________________
> gnokii-users mailing list
> address@hidden
> http://mail.nongnu.org/mailman/listinfo/gnokii-users

Saludos de Fernando Barceló
Desde Buenos Aires Argentina   
Usuario Registrado Linux Nº 296158