Re: Gnokii and Nokia 3310

[Sharuzzaman Ahmat Raslan]

Pawel Kot wrote:
> On Thu, 25 Mar 2004, Sharuzzaman Ahmat Raslan wrote:
>
>
> > In gnokiirc, I changed the port to /dev/ttyS1 and tried several
> > connection type like serial, dau9p and dlr3p but cannot connect to my phone.
>
>
> Looking at the attached config you use /dev/ttyS0 port for gammu and
> /dev/ttyS1 for gnokii. Probably that's the reason.
>
> pkot

Thanks for pointing that out. But gnokii still it cannot connect 
properly to my phone.

Gnokii complaining about "The fbus stream is out of sync - expected 
0x0c, got  0"

I attached the debug output here. Maybe my phone is an Asian variant of 3310

-----
Sharuzzaman Ahmat Raslan

GNOKII Version 0.6.0
phone instance config:
model: 3310
port_device: /dev/ttyS0
connection_type: 0
init_length: 0
serial_baudrate: 9600
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script: 
disconnect_script: 
Serial device: opening device /dev/ttyS0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to high
Message sent: 0x40 / 0x0004
00 01 64 01                                     |   d             
[Received Ack of type 40, seq: 80]
[Sending Ack of type 40, seq: 1]
Message received: 0x40 / 0x000c
01 01 64 03 01 4f 0d 01 01 01 1b 58             |   d  O     X    
Received message type 40
Message: Extended commands enabled.
Message sent: 0x40 / 0x0003
00 01 66                                        |   f             
The fbus stream is out of sync - expected 0x0c, got  0
[Sending Ack of type 40, seq: 2]
Message received: 0x40 / 0x0014
01 01 66 01 33 35 30 36 30 36 36 30 34 36 33 32 |   f 350606604632
35 31 33 00                                     | 513             
Received message type 40
The fbus stream is out of sync - expected 0x0c, got  0
[Sending Ack of type 0a, seq: 3]
Message received: 0x0a / 0x0013
01 08 00 71 01 00 01 0b 01 02 3a 68 0c e7 05 f2 |    q      :h    
61 00 00                                        | a               
Received message type 0a
The fbus stream is out of sync - expected 0x0c, got  0
SM_Block Retry - 0
Message sent: 0x40 / 0x0003
00 01 66                                        |   f             
The fbus stream is out of sync - expected 0x0c, got  0
[Sending Ack of type 40, seq: 4]
Message received: 0x40 / 0x0014
01 01 66 01 33 35 30 36 30 36 36 30 34 36 33 32 |   f 350606604632
35 31 33 00                                     | 513             
Received message type 40
The fbus stream is out of sync - expected 0x0c, got  0
SM_Block Retry - 1
Message sent: 0x40 / 0x0003
00 01 66                                        |   f             
The fbus stream is out of sync - expected 0x0c, got  0
[Received Ack of type 40, seq:  3]
[Sending Ack of type 40, seq: 5]
Message received: 0x40 / 0x0014
01 01 66 01 33 35 30 36 30 36 36 30 34 36 33 32 |   f 350606604632
35 31 33 00                                     | 513             
Received message type 40
Telephone interface init failed: Device not ready.
Quitting.