Nokia 30 - Unknown error when sending SMS.

[Iain Sims]

I've been trying to get a Nokia 30 to send SMS messages but continue to
get the less than helpful 'Unknown error' each time. HAs someone run
across similar problems and managed to fix this??

The device is connected via serial port to a RedHat box running kernel
2.4.20-30.9. I have installed GNOKII Version 0.6.4 and it correctly
identifies the Nokia device:
        
        10:39:56[netmon]# gnokii --identify
        GNOKII Version 0.6.4
        IMEI         : 350775910691826
        Manufacturer : Nokia Mobile Phones
        Model        : Nokia 30
        Revision     : V 8.75

*** START SMSSEND ***
10:40:01[netmon]# gnokii --sendsms 99283000
GNOKII Version 0.6.4
Please enter SMS text. End your input with <cr><control-D>:testing123
SMS Send failed (Problem occured internal to model specific code.)
*** END SMSSEND ***

Enabling debug produces the following output:

*** START FULL OUTPUT ***

10:42:40[netmon]# gnokii --sendsms 99283000 | tee /tmp/nokia.text
GNOKII Version 0.6.4
LOG: debug mask is 0x1
phone instance config:
model: AT
port_device: /dev/ttyS0
connection_type: 0
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script: 
disconnect_script: 
rfcomm_cn: 1
Initializing AT capable mobile phone ...
Serial device: opening device /dev/ttyS0
Serial device: setting RTS to high and DTR to high
Message sent: 0x00 / 0x0004
41 54 5a 0d                                     | ATZ             
write: [ATZ<cr>]
read : [ATZ<cr><cr><lf>OK<cr><lf>]
Message received: 0x00 / 0x000a
02 41 54 5a 0d 0d 0a 4f 4b 0d                   |  ATZ   OK       
Received message type 00
Message sent: 0x00 / 0x0005
41 54 45 31 0d                                  | ATE1            
write: [ATE1<cr>]
read : [ATE1<cr><cr><lf>OK<cr><lf>]
Message received: 0x00 / 0x000b
02 41 54 45 31 0d 0d 0a 4f 4b 0d                |  ATE1   OK      
Received message type 00
Message sent: 0x00 / 0x000a
41 54 2b 43 4d 45 45 3d 31 0d                   | AT+CMEE=1       
write: [AT+CMEE=1<cr>]
read : [AT+CMEE=1<cr><cr><lf>OK<cr><lf>]
Message received: 0x00 / 0x0010
02 41 54 2b 43 4d 45 45 3d 31 0d 0d 0a 4f 4b 0d |  AT+CMEE=1   OK 
Received message type 00
Message sent: 0x06 / 0x0008
41 54 2b 43 47 4d 4d 0d                         | AT+CGMM         
write: [AT+CGMM<cr>]
read : [AT+CGMM<cr><cr><lf>Nokia 30<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x06 / 0x001a
02 41 54 2b 43 47 4d 4d 0d 0d 0a 4e 6f 6b 69 61 |  AT+CGMM   Nokia
20 33 30 0d 0a 0d 0a 4f 4b 0d                   |  30    OK       
Received message type 06
Message sent: 0x06 / 0x0008
41 54 2b 43 47 4d 49 0d                         | AT+CGMI         
write: [AT+CGMI<cr>]
read : [AT+CGMI<cr><cr><lf>Nokia Mobile
Phones<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x06 / 0x0025
02 41 54 2b 43 47 4d 49 0d 0d 0a 4e 6f 6b 69 61 |  AT+CGMI   Nokia
20 4d 6f 62 69 6c 65 20 50 68 6f 6e 65 73 0d 0a |  Mobile Phones  
0d 0a 4f 4b 0d                                  |   OK            
Received message type 06
Message sent: 0x59 / 0x0009
41 54 2b 43 53 43 53 3f 0d                      | AT+CSCS?        
write: [AT+CSCS?<cr>]
read : [AT+CSCS?<cr><cr><lf>+CSCS: "PCCP437"<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x59 / 0x0023
02 41 54 2b 43 53 43 53 3f 0d 0d 0a 2b 43 53 43 |  AT+CSCS?   +CSC
53 3a 20 22 50 43 43 50 34 33 37 22 0d 0a 0d 0a | S: "PCCP437"    
4f 4b 0d                                        | OK              
Received message type 59
Initialisation completed
Message sent: 0x23 / 0x0009
41 54 2b 43 53 43 41 3f 0d                      | AT+CSCA?        
write: [AT+CSCA?<cr>]
read : [AT+CSCA?<cr><cr><lf>+CSCA:
"+356941816",145<cr><lf><cr><lf>OK<cr><lf>]
Message received: 0x23 / 0x002a
02 41 54 2b 43 53 43 41 3f 0d 0d 0a 2b 43 53 43 |  AT+CSCA?   +CSC
41 3a 20 22 2b 33 35 36 39 34 31 38 31 36 22 2c | A: "+356941816",
31 34 35 0d 0a 0d 0a 4f 4b 0d                   | 145    OK       
Received message type 23
Please enter SMS text. End your input with <cr><control-D>:testing1234
General Data Coding
dcs: 0x0
Length: 0xb
user_data_length: 0xa
ValidityIndicator: 2
user_data: F4F29C9E769F63B2190D
Sending
Message sent: 0x5b / 0x000a
41 54 2b 43 4d 47 46 3d 30 0d                   | AT+CMGF=0       
write: [AT+CMGF=0<cr>]
read : [AT+CMGF=0<cr><cr><lf>OK<cr><lf>]
Message received: 0x5b / 0x0010
02 41 54 2b 43 4d 47 46 3d 30 0d 0d 0a 4f 4b 0d |  AT+CMGF=0   OK 
Received message type 5b
PDU mode set
Sending initial sequence
Message sent: 0x5c / 0x000b
41 54 2b 43 4d 47 53 3d 32 32 0d                | AT+CMGS=22      
write: [AT+CMGS=22<cr>]
read : [AT+CMGS=22<cr><cr><lf>> ]
Message received: 0x5c / 0x000f
01 41 54 2b 43 4d 47 53 3d 32 32 0d 0d 0a 3e    |  AT+CMGS=22   > 
Received message type 5c
Got response 0
Sending frame:
069153961418F611000881998203000000AA0BF4F29C9E769F63B2190D
Message sent: 0x21 / 0x003b
30 36 39 31 35 33 39 36 31 34 31 38 46 36 31 31 | 069153961418F611
30 30 30 38 38 31 39 39 38 32 30 33 30 30 30 30 | 0008819982030000
30 30 41 41 30 42 46 34 46 32 39 43 39 45 37 36 | 00AA0BF4F29C9E76
39 46 36 33 42 32 31 39 30 44 1a                | 9F63B2190D      
write: [069153961418F611000881998203000000AA0BF4F29C9E769F63B2190D^Z]
read :
[^A^49153961418F611000881998203000000AA0BF4F29C9E769F63B2190D^Z<cr><lf>+CMS 
ERROR: 500<cr><lf>]
Message received: 0x21 / 0x004e
04 01 f4 39 31 35 33 39 36 31 34 31 38 46 36 31 |   ô9153961418F61
31 30 30 30 38 38 31 39 39 38 32 30 33 30 30 30 | 1000881998203000
30 30 30 41 41 30 42 46 34 46 32 39 43 39 45 37 | 000AA0BF4F29C9E7
36 39 46 36 33 42 32 31 39 30 44 1a 0d 0a 2b 43 | 69F63B2190D   +C
4d 53 20 45 52 52 4f 52 3a 20 35 30 30 0d       | MS ERROR: 500   
Received message type 21
SMS Send failed (Unknown error - well better than nothing!!)
Serial device: closing device

*** END FULL OUTPUT ***

What I do notice is that when the frame is being sent, there seems to be
an extra zero inserted in the middle of the number I am sending to. Is
this the normal pattern??

I've included a copy of the .gnokiirc file also.

TIA.

Iain.

*** START .gnokkiirc ***
[global]
        port = /dev/ttyS0
        model = AT
        initlength = default
        connection = serial
        bindir = /usr/local/sbin
        use_locking = yes
        serial_baudrate = 19200
        handshake = software
        smsc_timeout = 10

[connect_script]
        # TELEPHONE = 12345678

[disconnect_script]

[logging]
        debug = on
        # debug = off
*** END .gnokkiirc ***

signature.asc
Description: This is a digitally signed message part