Nokia 6230i over IrDA

[Marco Arioli]

Hi,
I have installed the latest gnokii and I'm trying to get it works with
my new Nokia 6230i (firmware version 3.40 / 23-05-05 / RM-72) but
without success.

Here is the debugging:

HOME> irdadump
10:44:06.396556 xid:cmd 059fda8d > ffffffff S=6 s=4 (14) 
10:44:06.392716 xid:rsp 059fda8d < 0000f56f S=6 s=3 Nokia 6230i
hint=b125 [ PnP Modem Fax Telephony IrCOMM IrOBEX ] (28) 
10:44:06.484572 xid:cmd 059fda8d > ffffffff S=6 s=5 (14) 

HOME> gnokii --identify
GNOKII Version 0.6.9
LOG: debug mask is 0x1
phone instance config:
model: 6510
port_device: /dev/ircomm0
connection_type: 0
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script: 
disconnect_script: 
rfcomm_cn: 1
sm_retry: off
Connecting
Serial device: opening device /dev/ircomm0
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to low
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
[Echo cancelled]
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |                 
[Echo cancelled]

...and so on

This is the /etc/gnokiirc

[global]
port = /dev/ircomm0
model = 6510
initlength = default
connection = serial
use_locking = yes
serial_baudrate = 19200
smsc_timeout = 10

[gnokiid]
bindir = /usr/local/sbin/

[connect_script]
TELEPHONE = 12345678
[disconnect_script]

[logging]
debug = on
rlpdebug = off
xdebug = off


Any ideas?

Gnokii worked good with my previous cell Nokia 6210 (model=7110).

Thanks,
Marco Arioli