Re: smsd problem with AT model

[Roberto Verzola]

I remember when I was first trying gnokii out, it took me a long time to 
figure out what memory was supported by the phone model I was using. 
Would it be possible to add a feature to gnokii (something like gnokii 
--memorytypes) and gnokii will return IN, SM, OU etc (whatever else will 
work with that particular model).

Regards to all,

Roberto Verzola

A. Andria wrote:

> Pawel Kot wrote:
>
> > [...]
> >
> > You still haven't shown the actual error. Before running SMSD with a
> > new phone/modem, always try --getsms IN 1 or --getsms SM 1 or
> > similiar.
> >
> > take care,
> > pkot
>
> Hi Pawel,
>
> Below are the result :
>
> address@hidden:~# gnokii --getsms IN 1
> [...]
> Received message type 61
> Initialisation completed
> GetSMS IN 1 failed! (Invalid type of memory.)
> See the gnokii manual page for the supported memory types with the phone
> you use.
> Serial device: closing device
>
> address@hidden:~# gnokii --getsms SM 1
> [...]
> Received message type 00
> Message sent: 0x06 / 0x0008
> 41 54 2b 43 47 4d 4d 0d                         | AT+CGMM
> write: [AT+CGMM<cr>]
> read : [AT+CGMM<cr><cr><lf> MULTIBAND  900E  1800 
> <cr><lf><cr><lf>OK<cr><lf>]
> Message received: 0x06 / 0x0029
> 02 41 54 2b 43 47 4d 4d 0d 0d 0a 20 4d 55 4c 54 |  AT+CGMM    MULT
> 49 42 41 4e 44 20 20 39 30 30 45 20 20 31 38 30 | IBAND  900E  180
> 30 20 0d 0a 0d 0a 4f 4b 0d                      | 0     OK
> Received message type 06
> Message sent: 0x06 / 0x0008
> 41 54 2b 43 47 4d 49 0d                         | AT+CGMI
> write: [AT+CGMI<cr>]
> read : [AT+CGMI<cr><cr><lf> WAVECOM MODEM<cr><lf><cr><lf>OK<cr><lf>]
> Message received: 0x06 / 0x0020
> 02 41 54 2b 43 47 4d 49 0d 0d 0a 20 57 41 56 45 |  AT+CGMI    WAVE
> 43 4f 4d 20 4d 4f 44 45 4d 0d 0a 0d 0a 4f 4b 0d | COM MODEM    OK
> Received message type 06
> Message sent: 0x61 / 0x0009
> 41 54 2b 43 53 43 53 3f 0d                      | AT+CSCS?
> write: [AT+CSCS?<cr>]
> read : [AT+CSCS?<cr><cr><lf>+CSCS: "PCCP437"<cr><lf><cr><lf>OK<cr><lf>]
> Message received: 0x61 / 0x0023
> 02 41 54 2b 43 53 43 53 3f 0d 0d 0a 2b 43 53 43 |  AT+CSCS?   +CSC
> 53 3a 20 22 50 43 43 50 34 33 37 22 0d 0a 0d 0a | S: "PCCP437"
> 4f 4b 0d                                        | OK
> Received message type 61
> Initialisation completed
> Message sent: 0x12 / 0x0009
> 41 54 2b 43 50 4d 53 3f 0d                      | AT+CPMS?
> write: [AT+CPMS?<cr>]
> read : [AT+CPMS?<cr><cr><lf>+CPMS: 
> "SM",2,30,"SM",2,30<cr><lf><cr><lf>OK<cr><lf>]
> Message received: 0x12 / 0x002d
> 02 41 54 2b 43 50 4d 53 3f 0d 0d 0a 2b 43 50 4d |  AT+CPMS?   +CPM
> 53 3a 20 22 53 4d 22 2c 32 2c 33 30 2c 22 53 4d | S: "SM",2,30,"SM
> 22 2c 32 2c 33 30 0d 0a 0d 0a 4f 4b 0d          | ",2,30    OK
> Received message type 12
> GetSMS SM 1 failed! (Command failed.)
> Serial device: closing device
>
> address@hidden:~# gnokii --getsms ME 1
> [...]
> Received message type 12
> GetSMS ME 1 failed! (Command failed.)
> Serial device: closing device
>
> address@hidden:~# gnokii --identify
> GNOKII Version 0.6.14
> [...]
> Received message type 06
> IMEI         : 123456789012345
> Manufacturer : WAVECOM MODEM
> Model        : MULTIBAND  900E  1800
> Product name : MULTIBAND  900E  1800
> Revision     : 543_09gg.Q2406A 136
> Serial device: closing device
>
> address@hidden:~# gnokii --getsmsc
> [...]
> Received message type 23
> No. 1: "" (default name)
> SMS center number is +62816124
> Default recipient number is
> Messages sent as Text
> Message validity is Maximum time
> Serial device: closing device
>
> address@hidden:~# gnokii --sendsms +6285659969486
> [...]
> Received message type 21
> Message sent okay
> Send succeeded!
> Serial device: closing device
>
> Is this contain an enough information for you ? Thanks for the help.