[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[gnuastro-commits] master 7743114 2/7: Book: Arithmetic operators now di
From: |
Mohammad Akhlaghi |
Subject: |
[gnuastro-commits] master 7743114 2/7: Book: Arithmetic operators now divided into sub-sections |
Date: |
Mon, 4 Oct 2021 18:51:28 -0400 (EDT) |
branch: master
commit 7743114b0a384cf77e356b79b14ed51827d16a2f
Author: Mohammad Akhlaghi <mohammad@akhlaghi.org>
Commit: Mohammad Akhlaghi <mohammad@akhlaghi.org>
Book: Arithmetic operators now divided into sub-sections
Until now, all the arithmetic operators were described under each other in
one section that was more than 20 pages in the PDF book!
With this commit similar operators have been grouped into separate
sub-sections to greatly help in navigating between them.
---
NEWS | 4 +
doc/gnuastro.texi | 450 +++++++++++++++++++++++++++++++++++++++---------------
2 files changed, 328 insertions(+), 126 deletions(-)
diff --git a/NEWS b/NEWS
index 5050e42..3190584 100644
--- a/NEWS
+++ b/NEWS
@@ -22,6 +22,10 @@ See the end of the file for license conditions.
- The section on reverse polish notation (used in Arithmetic, for
images, and column arithmetic in Table) has been edited and extended
to be more useful for a new user.
+ - Due to the great expansion of the number of operators in the
+ Arithmetic program and Column Arithmetic in the table program, the
+ "Arithmetic operators" section of the book has now grouped similar
+ operators in sub-sections to greatly help in finding a certain option.
Arithmetic:
- New operands (also available in Table's column arithmetic, the
diff --git a/doc/gnuastro.texi b/doc/gnuastro.texi
index 8e6e5a7..8b51bc4 100644
--- a/doc/gnuastro.texi
+++ b/doc/gnuastro.texi
@@ -448,6 +448,25 @@ Arithmetic
* Arithmetic operators:: List of operators known to Arithmetic
* Invoking astarithmetic:: How to run Arithmetic: options and output
+Arithmetic operators
+
+* Basic mathematical operators:: For example +, -, /, log, pow, and etc.
+* Trigonometric and hyperbolic operators:: sin, cos, atan, asinh, and etc
+* Unit conversion operators:: magnitudes to counts, or parsecs to AUs, and
etc.
+* Statistical operators:: Statistics of a single dataset (for example
mean).
+* Stacking operators:: Coadding or combining multiple datasets into
one.
+* Filtering operators:: Smoothing a dataset through mixing pixel with
neighbors.
+* Interpolation operators:: Giving blank pixels a value.
+* Dimensionality changing operators:: Collapse or expand a dataset.
+* Conditional operators:: Select certain pixels within the dataset.
+* Mathematical morphology operators:: Work on binary images, for example
erode.
+* Bitwise operators:: Work on bits within one pixel.
+* Numerical type conversion operators:: Convert the numeric datatype of a
dataset.
+* Adding noise operators:: Add noise to a dataset.
+* Elliptical shape operators:: Operations that are focused on an ellipse.
+* Building new dataset:: How to construct an empty dataset from scratch.
+* Operand storage in memory or a file:: Tools for complex operations in one
command.
+
Convolve
* Spatial domain convolution:: Only using the input image values.
@@ -12731,6 +12750,51 @@ The operands to all operators can be a data array (for
example a FITS image) or
For example a number multiplied by an array will produce an array.
The conditional operators will return pixel, or numerical values of 0 (false)
or 1 (true) and stored in an @code{unsigned char} data type (see @ref{Numeric
data types}).
+@cartouche
+@noindent
+@strong{Blank pixels in Arithmetic:} Blank pixels in the image (see @ref{Blank
pixels}) will be stored based on the data type.
+When the input is floating point type, blank values are NaN.
+One aspect of NaN values is that by definition they will fail on @emph{any}
comparison.
+Hence both equal and not-equal operators will fail when both their operands
are NaN!
+Therefore, the only way to guarantee selection of blank pixels is through the
@command{isblank} operator explained above.
+
+One way you can exploit this property of the NaN value to your advantage is
when you want a fully zero-valued image (even over the blank pixels) based on
an already existing image (with same size and world coordinate system settings).
+The following command will produce this for you:
+
+@example
+$ astarithmetic input.fits nan eq --output=all-zeros.fits
+@end example
+
+@noindent
+Note that on the command-line you can write NaN in any case (for example
@command{NaN}, or @command{NAN} are also acceptable).
+Reading NaN as a floating point number in Gnuastro isn't case-sensitive.
+@end cartouche
+
+@menu
+* Basic mathematical operators:: For example +, -, /, log, pow, and etc.
+* Trigonometric and hyperbolic operators:: sin, cos, atan, asinh, and etc
+* Unit conversion operators:: magnitudes to counts, or parsecs to AUs, and
etc.
+* Statistical operators:: Statistics of a single dataset (for example
mean).
+* Stacking operators:: Coadding or combining multiple datasets into
one.
+* Filtering operators:: Smoothing a dataset through mixing pixel with
neighbors.
+* Interpolation operators:: Giving blank pixels a value.
+* Dimensionality changing operators:: Collapse or expand a dataset.
+* Conditional operators:: Select certain pixels within the dataset.
+* Mathematical morphology operators:: Work on binary images, for example
erode.
+* Bitwise operators:: Work on bits within one pixel.
+* Numerical type conversion operators:: Convert the numeric datatype of a
dataset.
+* Adding noise operators:: Add noise to a dataset.
+* Elliptical shape operators:: Operations that are focused on an ellipse.
+* Building new dataset:: How to construct an empty dataset from scratch.
+* Operand storage in memory or a file:: Tools for complex operations in one
command.
+@end menu
+
+@node Basic mathematical operators, Trigonometric and hyperbolic operators,
Arithmetic operators, Arithmetic operators
+@subsubsection Basic mathematical operators
+
+These are some of the most common operations you will be doing on your data
and include, so no futher explanation is necessary.
+If you are new to Gnuastro, just read the description of each carefully.
+
@table @command
@item +
@@ -12748,6 +12812,14 @@ $ astarithmetic a.fits b.fits + -g1
--output=sum.fits
The HDU/extension has to be specified for each image with @option{-h}.
However, if the HDUs are the same in all inputs, you can use @option{-g} to
only specify the HDU once
+If you need to add more than one dataset, one way is to use this operator
multiple times, for example see the two commands below that are identical in
the Reverse Polish Notation (@ref{Reverse polish notation}):
+@example
+$ astarithmetic a.fits b.fits + c.fits + -osum.fits
+$ astarithmetic a.fits b.fits c.fits + + -osum.fits
+@end example
+
+However, this can get annoying/buggy if you have more than three or four
images, in that case, a better way to sum data is to use the @code{sum}
operator (which also ignores blank pixels), that is discussed below.
+
@item -
Subtraction, so ``@command{4 5 -}'' is equivalent to @mymath{4-5}.
Usage of this operator is similar to @command{+} operator, for example:
@@ -12838,6 +12910,15 @@ For example the command below will take the base-10
logarithm of every pixel in
@example
$ astarithmetic image.fits log10
@end example
+@end table
+
+@node Trigonometric and hyperbolic operators, Unit conversion operators, Basic
mathematical operators, Arithmetic operators
+@subsubsection Trigonometric and hyperbolic operators
+
+All the trigonometric and hyperbolic functioncs are described here.
+One good thing with these operators is that they take inputs and outputs in
degrees (which we usually need as input or output), not radians (like most
other programs/libraries).
+
+@table @command
@item sin
@itemx cos
@@ -12890,6 +12971,16 @@ These operators take a single operand.
@itemx atanh
Inverse Hyperbolic sine, cosine, and tangent.
These operators take a single operand.
+@end table
+
+
+@node Unit conversion operators, Statistical operators, Trigonometric and
hyperbolic operators, Arithmetic operators
+@subsubsection Unit conversion operators
+
+It often happens that you have data in one unit (for example magnitudes to
measure the brighntess of a galaxy), but would like to convert it into another
(for example electron counts on your CCD).
+While the equations for the unit conversions can be easily found on the
internet, the operators in this section are designed to simplify the process
and let you do it easily.
+
+@table @command
@item counts-to-mag
Convert counts (usually CCD outputs) to magnitudes using the given zeropoint.
@@ -12981,6 +13072,14 @@ For the conversion and a similar example, see the
descrioption of @code{ly-to-pc
Convert Astronomical Units (AUs) to Light-years (LY).
This operator takes a single argument which is interpretted to be the input
AUs.
For the conversion and a similar example, see the descrioption of
@code{ly-to-pc}.
+@end table
+
+@node Statistical operators, Stacking operators, Unit conversion operators,
Arithmetic operators
+@subsubsection Statistical operators
+
+The operators in this section take a single dataset as input, and will return
the desired statistic as a single value.
+
+@table @command
@item minvalue
Minimum value in the first popped operand, so ``@command{a.fits minvalue}''
will push the minimum pixel value in this image onto the stack.
@@ -13044,6 +13143,44 @@ Its usage is similar to @command{minvalue}, for example
$ astarithmetic image.fits medianvalue -q
@end example
+@item unique
+Remove all duplicate (and blank) elements from the first popped operand.
+The unique elements of the dataset will be stored in a single-dimensional
dataset.
+
+Recall that by default, single-dimensional datasets are stored as a table
column in the output.
+But you can use @option{--onedasimage} or @option{--onedonstdout} to
respectively store them as a single-dimensional FITS array/image, or to print
them on the standard output.
+
+Although you can use this operator on the floating point dataset, due to
floating-point errors it may give non-reasonable values: because the tenth
digit of the decimal point is also considered although it may be statistically
meaningless, see @ref{Numeric data types}.
+It is therefore better/recommended to use it on the integer dataset like the
labeled images of @ref{Segment output} where each pixel has the integer label
of the object/clump it is associated with.
+For example let's assume you have cropped a region of a larger labeled image
and want to find the labels/objects that are within the crop.
+With this operator, this job is trivial:
+@example
+$ astarithmetic seg-crop.fits unique
+@end example
+
+@item size
+Size of the dataset along a given FITS/Fortran dimension (counting from 1).
+The desired dimension should be the first popped operand and the dataset must
be the second popped operand.
+The output will be a single unsigned integer (dimensions cannot be negative).
+For example, the following command will produce the size of the first
extension/HDU (the default HDU) of @file{a.fits} along the second FITS axis.
+
+@example
+$ astarithmetic a.fits 2 size
+@end example
+@end table
+
+@node Stacking operators, Filtering operators, Statistical operators,
Arithmetic operators
+@subsubsection Stacking operators
+
+@cindex Stacking
+@cindex Coaddition
+The operators in this section are used when you have multiple datasets that
you would like to merge into one, commonly known as ``stacking'' or
``coaddition''.
+For example, you have taken ten exposures of your scientific target, and you
would like to combine them all into one deep stacked image that is deeper.
+
+When calling these operators you should determine how many operands they
should take in (unlike the rest of the operators that have a fixed number of
input operands).
+As described in the first operand below, you do this through their first
popped operand (which should be a single integer number that is larger than
one).
+
+@table @command
@cindex NaN
@item min
@@ -13189,6 +13326,14 @@ For example
@example
astarithmetic a.fits b.fits c.fits 3 5 0.2 sigclip-std
@end example
+@end table
+
+@node Filtering operators, Interpolation operators, Stacking operators,
Arithmetic operators
+@subsubsection Filtering (smoothing) operators
+
+Image filtering is commonly used for smoothing: every pixel value in the
output image is created by applying a certain statistic to the pixels in its
vicinity.
+
+@table @command
@item filter-mean
Apply mean filtering (or @url{https://en.wikipedia.org/wiki/Moving_average,
moving average}) on the input dataset.
@@ -13243,6 +13388,15 @@ However, if there are strong outliers in the dataset
that you want to ignore (fo
@item filter-sigclip-median
Apply a @mymath{\sigma}-clipped median filtering onto the input dataset.
This operator and its necessary operands are almost identical to
@code{filter-sigclip-mean}, except that after @mymath{\sigma}-clipping, the
median value (which is less affected by outliers than the mean) is added back
to the stack.
+@end table
+
+@node Interpolation operators, Dimensionality changing operators, Filtering
operators, Arithmetic operators
+@subsubsection Interpolation operators
+
+Interpolation is the process of removing blank pixels from a dataset (by
giving them a value based on the non-blank neighbors).
+
+@table @command
+
@item interpolate-medianngb
Interpolate the blank elements of the second popped operand with the median of
nearest non-blank neighbors to each.
@@ -13288,6 +13442,18 @@ This operator can be useful in filling saturated
pixels in stars for example.
Recall that the @option{interpolate-maxngb} operator looks for the maximum
value with a given number of neighboring pixels and is more useful in small
noisy regions.
Therefore as the blank regions become larger, @option{interpolate-maxngb} can
cause a fragmentation in the connected blank region because the nearest
neighbor to one part of the blank region, may not fall within the pixels
searched for the other regions.
With this option, the size of the blank region is irrelevant: all the pixels
bordering the blank region are parsed and their maximum value is used for the
whole region.
+@end table
+
+@node Dimensionality changing operators, Conditional operators, Interpolation
operators, Arithmetic operators
+@subsubsection Dimensionality changing operators
+
+Through these operators you can change the dimentions of the output through
certain statistics on the dimensions that should be removed.
+For example, let's assume you have a 3D data cube that has 300 by 300 pixels
in the RA and Dec dimensions (first two dimensions), and 3600 slices along the
wavelength (third dimension), so the whole cube is
@mymath{300\times300\times3600} voxels (volume elements).
+To create a narrow-band image that only contains 100 slices around a certain
wavelength, you can crop that section (using @ref{Crop}), giving you a
@mymath{300\times300\times100} cube.
+You can now use the @code{collapse-sum} operator below to ``collapse'' all the
100 slices into one 2D image that has @mymath{300\times300} pixels.
+Every pixel in this 2D image will have the flux of the sum of the 100 slices.
+
+@table @command
@item collapse-sum
Collapse the given dataset (second popped operand), by summing all elements
along the first popped operand (a dimension in FITS standard: counting from
one, from fastest dimension).
@@ -13349,105 +13515,12 @@ For example if you want to put the three
@file{img1.fits}, @file{img2.fits} and
@example
$ astarithmetic img1.fits img2.fits img3.fits 3 add-dimension
@end example
+@end table
-@item unique
-Remove all duplicate (and blank) elements from the first popped operand.
-The unique elements of the dataset will be stored in a single-dimensional
dataset.
-
-Recall that by default, single-dimensional datasets are stored as a table
column in the output.
-But you can use @option{--onedasimage} or @option{--onedonstdout} to
respectively store them as a single-dimensional FITS array/image, or to print
them on the standard output.
-
-Although you can use this operator on the floating point dataset, due to
floating-point errors it may give non-reasonable values: because the tenth
digit of the decimal point is also considered although it may be statistically
meaningless, see @ref{Numeric data types}.
-It is therefore better/recommended to use it on the integer dataset like the
labeled images of @ref{Segment output} where each pixel has the integer label
of the object/clump it is associated with.
-For example let's assume you have cropped a region of a larger labeled image
and want to find the labels/objects that are within the crop.
-With this operator, this job is trivial:
-@example
-$ astarithmetic seg-crop.fits unique
-@end example
-
-@item erode
-@cindex Erosion
-Erode the foreground pixels (with value @code{1}) of the input dataset (second
popped operand).
-The first popped operand is the connectivity (see description in
@command{connected-components}).
-Erosion is simply a flipping of all foreground pixels (with value @code{1}) to
background (with value @code{0}) that are ``touching'' background pixels.
-``Touching'' is defined by the connectivity.
-
-In effect, this operator ``carves off'' the outer borders of the foreground,
making them thinner.
-This operator assumes a binary dataset (all pixels are @code{0} or @code{1}).
-For example, imagine that you have an astronomical image with a mean/sky value
of 0 units and a standard deviation (@mymath{\sigma}) of 100 units and many
galaxies in it.
-With the first command below, you can apply a threshold of @mymath{2\sigma} on
the image (by only keeping pixels that are greater than 200 using the
@command{gt} operator).
-The output of thresholding the image is a binary image (each pixel is either
smaller or equal to the threshold or larger than it).
-You can then erode the binary image with the second command below to remove
very small false positives (one or two pixel peaks).
-@example
-$ astarithmetic image.fits 100 gt -obinary.fits
-$ astarithmetic binary.fits 2 erode -oout.fits
-@end example
-
-In fact, you can merge these operations into one command thanks to the reverse
polish notation (see @ref{Reverse polish notation}):
-@example
-$ astarithmetic image.fits 100 gt 2 erode -oout.fits
-@end example
-
-To see the effect of connectivity, try this:
-@example
-$ astarithmetic image.fits 100 gt 1 erode -oout-con-1.fits
-@end example
-
-@item dilate
-@cindex Dilation
-Dilate the foreground pixels (with value @code{1}) of the binary input dataset
(second popped operand).
-The first popped operand is the connectivity (see description in
@command{connected-components}).
-Dilation is simply a flipping of all background pixels (with value @code{0})
to foreground (with value @code{1}) that are ``touching'' foreground pixels.
-``Touching'' is defined by the connectivity.
-In effect, this expands the outer borders of the foreground.
-This operator assumes a binary dataset (all pixels are @code{0} and @code{1}).
-The usage is similar to @code{erode}, for example:
-@example
-$ astarithmetic binary.fits 2 dilate -oout.fits
-@end example
-
-@item connected-components
-@cindex Connected components
-Find the connected components in the input dataset (second popped operand).
-The first popped is the connectivity used in the connected components
algorithm.
-The second popped operand is the dataset where connected components are to be
found.
-It is assumed to be a binary image (with values of 0 or 1).
-It must have an 8-bit unsigned integer type which is the format produced by
conditional operators.
-This operator will return a labeled dataset where the non-zero pixels in the
input will be labeled with a counter (starting from 1).
-
-The connectivity is a number between 1 and the number of dimensions in the
dataset (inclusive).
-1 corresponds to the weakest (symmetric) connectivity between elements and the
number of dimensions the strongest.
-For example on a 2D image, a connectivity of 1 corresponds to 4-connected
neighbors and 2 corresponds to 8-connected neighbors.
-
-One example usage of this operator can be the identification of regions above
a certain threshold, as in the command below.
-With this command, Arithmetic will first separate all pixels greater than 100
into a binary image (where pixels with a value of 1 are above that value).
-Afterwards, it will label all those that are connected.
-
-@example
-$ astarithmetic in.fits 100 gt 2 connected-components
-@end example
-
-If your input dataset doesn't have a binary type, but you know all its values
are 0 or 1, you can use the @code{uint8} operator (below) to convert it to
binary.
-
-@item fill-holes
-Flip background (0) pixels surrounded by foreground (1) in a binary dataset.
-This operator takes two operands (similar to @code{connected-components}): the
second is the binary (0 or 1 valued) dataset to fill holes in and the first
popped operand is the connectivity (to define a hole).
-Imagine that in your dataset there are some holes with zero value inside the
objects with one value (for example the output of the thresholding example of
@command{erode}) and you want to fill the holes:
-@example
-$ astarithmetic binary.fits 2 fill-holes
-@end example
-
-@item invert
-Invert an unsigned integer dataset (won't work on other data types, see
@ref{Numeric data types}).
-This is the only operator that ignores blank values (which are set to be the
maximum values in the unsigned integer types).
-
-This is useful in cases where the target(s) has(have) been imaged in
absorption as raw formats (which are unsigned integer types).
-With this option, the maximum value for the given type will be subtracted from
each pixel value, thus ``inverting'' the image, so the target(s) can be treated
as emission.
-This can be useful when the higher-level analysis methods/tools only work on
emission (positive skew in the noise, not negative).
-@example
-$ astarithmetic image.fits invert
-@end example
+@node Conditional operators, Mathematical morphology operators, Dimensionality
changing operators, Arithmetic operators
+@subsubsection Conditional operators
+@table @command
@item lt
Less than: creates a binary output (values either 0 or 1) where each pixel
will be 1 if the second popped operand is smaller than the first popped operand
and 0 otherwise.
If both operands are images, then all the pixels will be compared with their
counterparts in the other image.
@@ -13583,7 +13656,107 @@ Hence, in the example below, all the pixels in
@file{reference.fits} that have a
@example
$ astarithmetic in.fits reference.fits 100 gt nan where
@end example
+@end table
+
+@node Mathematical morphology operators, Bitwise operators, Conditional
operators, Arithmetic operators
+@subsubsection Mathematical morphology operators
+
+@cindex Mathematical morphology
+From Wikipedia: ``Mathematical morphology (MM) is a theory and technique for
the analysis and processing of geometrical structures, based on set theory,
lattice theory, topology, and random functions. MM is most commonly applied to
digital images''.
+In theory it extends a very large body of research and methods in image
processing, but corrently in Gnuastro it mainly applies to images that are
binary (only have a value of 0 or 1).
+For example you have applied the greater-than operator (@code{gt}, see
@ref{Conditional operators}) to select all pixels in your image that are larger
than a value of 100.
+But they will all have a value of 1, and you want to separate the various
groups of pixels that are connected (for example peaks of stars in your image).
+With the @code{connected-components} operator, you can give each connected
region of the output of @code{gt} a separate integer label.
+
+@table @command
+@item erode
+@cindex Erosion
+Erode the foreground pixels (with value @code{1}) of the input dataset (second
popped operand).
+The first popped operand is the connectivity (see description in
@command{connected-components}).
+Erosion is simply a flipping of all foreground pixels (with value @code{1}) to
background (with value @code{0}) that are ``touching'' background pixels.
+``Touching'' is defined by the connectivity.
+
+In effect, this operator ``carves off'' the outer borders of the foreground,
making them thinner.
+This operator assumes a binary dataset (all pixels are @code{0} or @code{1}).
+For example, imagine that you have an astronomical image with a mean/sky value
of 0 units and a standard deviation (@mymath{\sigma}) of 100 units and many
galaxies in it.
+With the first command below, you can apply a threshold of @mymath{2\sigma} on
the image (by only keeping pixels that are greater than 200 using the
@command{gt} operator).
+The output of thresholding the image is a binary image (each pixel is either
smaller or equal to the threshold or larger than it).
+You can then erode the binary image with the second command below to remove
very small false positives (one or two pixel peaks).
+@example
+$ astarithmetic image.fits 100 gt -obinary.fits
+$ astarithmetic binary.fits 2 erode -oout.fits
+@end example
+
+In fact, you can merge these operations into one command thanks to the reverse
polish notation (see @ref{Reverse polish notation}):
+@example
+$ astarithmetic image.fits 100 gt 2 erode -oout.fits
+@end example
+
+To see the effect of connectivity, try this:
+@example
+$ astarithmetic image.fits 100 gt 1 erode -oout-con-1.fits
+@end example
+
+@item dilate
+@cindex Dilation
+Dilate the foreground pixels (with value @code{1}) of the binary input dataset
(second popped operand).
+The first popped operand is the connectivity (see description in
@command{connected-components}).
+Dilation is simply a flipping of all background pixels (with value @code{0})
to foreground (with value @code{1}) that are ``touching'' foreground pixels.
+``Touching'' is defined by the connectivity.
+In effect, this expands the outer borders of the foreground.
+This operator assumes a binary dataset (all pixels are @code{0} and @code{1}).
+The usage is similar to @code{erode}, for example:
+@example
+$ astarithmetic binary.fits 2 dilate -oout.fits
+@end example
+
+@item connected-components
+@cindex Connected components
+Find the connected components in the input dataset (second popped operand).
+The first popped is the connectivity used in the connected components
algorithm.
+The second popped operand is the dataset where connected components are to be
found.
+It is assumed to be a binary image (with values of 0 or 1).
+It must have an 8-bit unsigned integer type which is the format produced by
conditional operators.
+This operator will return a labeled dataset where the non-zero pixels in the
input will be labeled with a counter (starting from 1).
+
+The connectivity is a number between 1 and the number of dimensions in the
dataset (inclusive).
+1 corresponds to the weakest (symmetric) connectivity between elements and the
number of dimensions the strongest.
+For example on a 2D image, a connectivity of 1 corresponds to 4-connected
neighbors and 2 corresponds to 8-connected neighbors.
+
+One example usage of this operator can be the identification of regions above
a certain threshold, as in the command below.
+With this command, Arithmetic will first separate all pixels greater than 100
into a binary image (where pixels with a value of 1 are above that value).
+Afterwards, it will label all those that are connected.
+
+@example
+$ astarithmetic in.fits 100 gt 2 connected-components
+@end example
+
+If your input dataset doesn't have a binary type, but you know all its values
are 0 or 1, you can use the @code{uint8} operator (below) to convert it to
binary.
+
+@item fill-holes
+Flip background (0) pixels surrounded by foreground (1) in a binary dataset.
+This operator takes two operands (similar to @code{connected-components}): the
second is the binary (0 or 1 valued) dataset to fill holes in and the first
popped operand is the connectivity (to define a hole).
+Imagine that in your dataset there are some holes with zero value inside the
objects with one value (for example the output of the thresholding example of
@command{erode}) and you want to fill the holes:
+@example
+$ astarithmetic binary.fits 2 fill-holes
+@end example
+
+@item invert
+Invert an unsigned integer dataset (won't work on other data types, see
@ref{Numeric data types}).
+This is the only operator that ignores blank values (which are set to be the
maximum values in the unsigned integer types).
+
+This is useful in cases where the target(s) has(have) been imaged in
absorption as raw formats (which are unsigned integer types).
+With this option, the maximum value for the given type will be subtracted from
each pixel value, thus ``inverting'' the image, so the target(s) can be treated
as emission.
+This can be useful when the higher-level analysis methods/tools only work on
emission (positive skew in the noise, not negative).
+@example
+$ astarithmetic image.fits invert
+@end example
+@end table
+@node Bitwise operators, Numerical type conversion operators, Mathematical
morphology operators, Arithmetic operators
+@subsubsection Bitwise operators
+
+@table @command
@item bitand
Bitwise AND operator: only bits with values of 1 in both popped operands will
get the value of 1, the rest will be set to 0.
For example (assuming numbers can be written as bit strings on the
command-line): @code{00101000 00100010 bitand} will give @code{00100000}.
@@ -13615,6 +13788,17 @@ Bitwise not (more formally known as one's complement)
operator: flip all the bit
In other words, any bit with a value of @code{0} is changed to @code{1} and
vice-versa.
For example (assuming numbers can be written as bit strings on the
command-line): @code{00101000 bitnot} will give @code{11010111}.
Note that the bitwise operators only work on integer type datasets/numbers.
+@end table
+
+@node Numerical type conversion operators, Adding noise operators, Bitwise
operators, Arithmetic operators
+@subsubsection Numerical type conversion operators
+
+With the operators below you can convert the numerical data type of your
input, see @ref{Numeric data types}.
+For example, let's assume that your colleage gives you thousands of single
exposure images for archival, but they have a double-precision floating point
type!
+You know that the statistical error a single-exposure image can never exceed 6
or 7 significant digits, so you would prefer to archive them as a
single-precision floating point and save space on your computer (a
double-precision floating point is also double the file size!).
+You can do this with the @code{float32} operator described below.
+
+@table @command
@item uint8
Convert the type of the popped operand to 8-bit unsigned integer type (see
@ref{Numeric data types}).
@@ -13651,6 +13835,16 @@ The internal conversion of C will be used.
@item float64
Convert the type of the popped operand to 64-bit (double precision) floating
point (see @ref{Numeric data types}).
The internal conversion of C will be used.
+@end table
+
+@node Adding noise operators, Elliptical shape operators, Numerical type
conversion operators, Arithmetic operators
+@subsubsection Adding noise operators
+
+When you simulate data (for example see @ref{Sufi simulates a detection}),
everything is ideal and there is no noise!
+The final step of the process is to add simulated noise to the data.
+The operators in this section are designed for that purpose.
+
+@table @command
@item mknoise-sigma
Add a fixed noise (Gaussian standard deviation) to each element of the input
dataset.
@@ -13729,17 +13923,14 @@ echo 12 | asttable -c'arith $1 4 mknoise-uniform'
@end example
Similar to the example in @code{mknoise-sigma}, you can pipe the output of
@command{echo} to @command{awk} before passing it to @command{asttable} to
generate a full column of uniformly selected values within the same interval.
+@end table
-@item size
-Size of the dataset along a given FITS/Fortran dimension (counting from 1).
-The desired dimension should be the first popped operand and the dataset must
be the second popped operand.
-The output will be a single unsigned integer (dimensions cannot be negative).
-For example, the following command will produce the size of the first
extension/HDU (the default HDU) of @file{a.fits} along the second FITS axis.
+@node Elliptical shape operators, Building new dataset, Adding noise
operators, Arithmetic operators
+@subsubsection Elliptical shape operators
-@example
-$ astarithmetic a.fits 2 size
-@end example
+The operators here describe certain functions that will be necessary when
dealing with objects that have a certain elliptical shape.
+@table @command
@item box-around-ellipse
Return the width (along horizontal) and height (along vertical) of a box that
encompases an ellipse with the same center point.
The top-popped operand is assumed to be the position angle (angle from the
horizontal axis) in @emph{degrees}.
@@ -13780,7 +13971,14 @@ $ asttable catalog.fits \
set-height set-width \
width float32 height float32'
@end example
+@end table
+
+@node Building new dataset, Operand storage in memory or a file, Elliptical
shape operators, Arithmetic operators
+@subsubsection Building new dataset
+
+
+@table @command
@item makenew
Create a new dataset that only has zero values.
The number of dimensions is read as the first popped operand and the number of
elements along each dimension are the next popped operand (in reverse of the
popping order).
@@ -13788,9 +13986,29 @@ The type of the new dataset is an unsigned 8-bit
integer and all pixel values ha
For example, if you want to create a new 100 by 200 pixel image, you can run
this command:
@example
-astarithmetic 100 200 2 makenew
+$ astarithmetic 100 200 2 makenew
+@end example
+
+@noindent
+To futher extend the example, you can use any of the noise-making operators to
add noise to this new dataset (see @ref{Adding noise operators}), like the
command below:
+
+@example
+$ astarithmetic 100 200 2 makenew 5 mknoise-sigma
@end example
+@end table
+
+@node Operand storage in memory or a file, , Building new dataset, Arithmetic
operators
+@subsubsection Operand storage in memory or a file
+
+In your early days of using Gnuastro, to do multiple operations, it is likely
that you will simply call Arithmetic (or Table, with column crithmetic)
multiple times.
+But as you get more proficient in the reverse polish notation, you will find
yourself combining many operations into one call.
+This greatly speeds up your operation, because instead of writing the dataset
to a file in one command, and reading it in the next command, it will just keep
the intermediate dataset in memory!
+
+But adding more complexity to your operations, can make them much harder to
debug, or extend even further.
+Therefore in this section we have some special operators that behave
differently from the rest: they don't touch the contents of the data, only
where/how they are stored.
+They are designed to do complex operations, without necessarily having a
complex command.
+@table @command
@item set-AAA
Set the characters after the dash (@code{AAA} in the case shown here) as a
name for the first popped operand on the stack.
The named dataset will be freed from memory as soon as it is no longer needed,
or if the name is reset to refer to another dataset later in the command.
@@ -13842,26 +14060,6 @@ Similar to the @code{tofile} operator, with the only
difference that the dataset
@end table
-@cartouche
-@noindent
-@strong{Blank pixels in Arithmetic:} Blank pixels in the image (see @ref{Blank
pixels}) will be stored based on the data type.
-When the input is floating point type, blank values are NaN.
-One aspect of NaN values is that by definition they will fail on @emph{any}
comparison.
-Hence both equal and not-equal operators will fail when both their operands
are NaN!
-Therefore, the only way to guarantee selection of blank pixels is through the
@command{isblank} operator explained above.
-
-One way you can exploit this property of the NaN value to your advantage is
when you want a fully zero-valued image (even over the blank pixels) based on
an already existing image (with same size and world coordinate system settings).
-The following command will produce this for you:
-
-@example
-$ astarithmetic input.fits nan eq --output=all-zeros.fits
-@end example
-
-@noindent
-Note that on the command-line you can write NaN in any case (for example
@command{NaN}, or @command{NAN} are also acceptable).
-Reading NaN as a floating point number in Gnuastro isn't case-sensitive.
-@end cartouche
-
@node Invoking astarithmetic, , Arithmetic operators, Arithmetic
@subsection Invoking Arithmetic
- [gnuastro-commits] master updated (3d810ae -> aac9048), Mohammad Akhlaghi, 2021/10/04
- [gnuastro-commits] master 7743114 2/7: Book: Arithmetic operators now divided into sub-sections,
Mohammad Akhlaghi <=
- [gnuastro-commits] master f8ceb0a 5/7: Library (wcs): free 'imgcrd' memory, Mohammad Akhlaghi, 2021/10/04
- [gnuastro-commits] master 62ce84b 3/7: Book: extended introduction added to bitwise operators, Mohammad Akhlaghi, 2021/10/04
- [gnuastro-commits] master 327c7d3 6/7: Library (wcs.c): rename array to list converter, Mohammad Akhlaghi, 2021/10/04
- [gnuastro-commits] master bdaa44b 1/7: Library (arithmetic.h): sum operator uses pixels in data with blank, Mohammad Akhlaghi, 2021/10/04
- [gnuastro-commits] master aac9048 7/7: Library (fits.h): better warning message in gal_fits_key_write_filename, Mohammad Akhlaghi, 2021/10/04
- [gnuastro-commits] master 02375f8 4/7: Development: built shell completion files added to .gitignore, Mohammad Akhlaghi, 2021/10/04