[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[GNUnet-SVN] r22929 - gnunet-planetlab/gplmt/contrib
From: |
gnunet |
Subject: |
[GNUnet-SVN] r22929 - gnunet-planetlab/gplmt/contrib |
Date: |
Thu, 26 Jul 2012 17:39:12 +0200 |
Author: wachs
Date: 2012-07-26 17:39:12 +0200 (Thu, 26 Jul 2012)
New Revision: 22929
Modified:
gnunet-planetlab/gplmt/contrib/deploy_gnunet_fc8.xml
Log:
gnunet configure passes
missing:
- gnutls, mhd, postgres
Modified: gnunet-planetlab/gplmt/contrib/deploy_gnunet_fc8.xml
===================================================================
--- gnunet-planetlab/gplmt/contrib/deploy_gnunet_fc8.xml 2012-07-26
15:36:49 UTC (rev 22928)
+++ gnunet-planetlab/gplmt/contrib/deploy_gnunet_fc8.xml 2012-07-26
15:39:12 UTC (rev 22929)
@@ -73,14 +73,6 @@
<sequence enabled="false">
<!-- Install dependencies -->
- <run id="1" name="Install dependencies with yum : libunistring-devel">
- <command>sudo yum -y -t --nogpgcheck install</command>
- <arguments>libunistring-devel</arguments>
- <timeout>0</timeout>
- <expected_return_code>0</expected_return_code>
- <expected_output></expected_output>
- <stop_on_fail>false</stop_on_fail>
- </run>
<run id="1" name="Install dependencies with yum : gnutls-devel">
<command>sudo yum -y -t --nogpgcheck install</command>
<arguments>gnutls-devel</arguments>
@@ -238,11 +230,9 @@
<expected_output></expected_output>
<stop_on_fail>true</stop_on_fail>
</run>
- </sequence>
</sequence>
-
<sequence enabled="true">
- <!-- Install libgpg -->
+ <!-- Install libgpg-error -->
<run id="1" name="Download libgpg-error">
<command>mkdir libgpg-error; cd libgpg-error; wget </command>
<arguments>ftp://ftp.gnupg.org/gcrypt/libgpg-error/libgpg-error-1.10.tar.bz2</arguments>
@@ -275,7 +265,116 @@
<expected_output></expected_output>
<stop_on_fail>true</stop_on_fail>
</run>
- </sequence>
+ </sequence>
+ <sequence enabled="true">
+ <!-- Install libgcrypt -->
+ <run id="1" name="Download libgcrypt">
+ <command>mkdir libgcrypt; cd libgcrypt; wget </command>
+
<arguments>ftp://ftp.gnupg.org/gcrypt/libgcrypt/libgcrypt-1.5.0.tar.bz2</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Unpack libgcrypt">
+ <command>cd libgcrypt; tar -xjvf</command>
+ <arguments>libgcrypt-1.5.0.tar.bz2</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Configure libgcrypt">
+ <command>cd libgcrypt/libgcrypt-1.5.0; ./configure </command>
+ <arguments></arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Install libgcrypt">
+ <command>cd libgcrypt/libgcrypt-1.5.0; sudo make install</command>
+ <arguments> </arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+ <sequence enabled="true">
+ <!-- Install libcurl -->
+ <run id="1" name="Download libcurl">
+ <command>mkdir libcurl; cd libcurl; wget </command>
+
<arguments>http://curl.haxx.se/download/curl-7.26.0.tar.gz</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Unpack libcurl">
+ <command>cd libcurl; tar -xzvf</command>
+ <arguments>curl-7.26.0.tar.gz</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Configure libcurl">
+ <command>cd libcurl/curl-7.26.0; ./configure </command>
+ <arguments></arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Install libcurl">
+ <command>cd libcurl/curl-7.26.0; sudo make install</command>
+ <arguments> </arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+ <sequence enabled="true">
+ <!-- Install libunistring -->
+ <run id="1" name="Download libunistring">
+ <command>mkdir libunistring; cd libunistring; wget </command>
+
<arguments>http://ftp.gnu.org/gnu/libunistring/libunistring-0.9.3.tar.gz</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Unpack libunistring">
+ <command>cd libunistring; tar -xzvf</command>
+ <arguments>libunistring-0.9.3.tar.gz</arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Configure libunistring">
+ <command>cd libunistring/libunistring-0.9.3; ./configure
</command>
+ <arguments></arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ <run id="1" name="Install libunistring">
+ <command>cd libunistring/libunistring-0.9.3; sudo make
install</command>
+ <arguments> </arguments>
+ <timeout>0</timeout>
+ <expected_return_code>0</expected_return_code>
+ <expected_output></expected_output>
+ <stop_on_fail>true</stop_on_fail>
+ </run>
+ </sequence>
+ </sequence>
+
+
+
<sequence enabled="false">
<!-- Install libextractor -->
@@ -331,8 +430,8 @@
<stop_on_fail>true</stop_on_fail>
</run>
<run id="1" name="Configure GNUnet">
- <command>cd gnunet; ./configure </command>
- <arguments>--prefix=$HOME/gnbuild --with-extractor=/usr
--with-mysql=/usr/lib/mysql --enable-logging=verbose</arguments>
+ <command>cd gnunet; export LD_LIBRARY_PATH=/usr/local/lib;
./configure </command>
+ <arguments>--prefix=$HOME/gnbuild --with-extractor=/usr
--with-libgcrypt=/usr/local --with-curl=/usr/local --with-mysql=/usr/lib/mysql
--enable-logging=verbose</arguments>
<timeout>0</timeout>
<expected_return_code>0</expected_return_code>
<expected_output></expected_output>
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [GNUnet-SVN] r22929 - gnunet-planetlab/gplmt/contrib,
gnunet <=