gpsd-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [gpsd-users] Trimble accutime GG


From: Venkatesh Sandilya
Subject: Re: [gpsd-users] Trimble accutime GG
Date: Fri, 12 Dec 2014 15:41:15 -0500

The following is part of  what I got by running the gpspipe program. Hopefully this helps.

{"class":"VERSION","release":"3.9","rev":"3.9","proto_major":3,"proto_minor":8}
{"class":"DEVICES","devices":[{"class":"DEVICE","path":"/dev/ttyS0","activated":"2014-12-12T08:49:01.316Z","flags":1,"driver":"Trimble TSIP","subtype":"1.6 130621 1.6 130621","native":1,"bps":9600,"parity":"O","stopbits":1,"cycle":1.00}]}
{"class":"WATCH","enable":true,"json":false,"nmea":true,"raw":0,"scaled":false,"timing":false}
$GPRMC,203459,A,4046.8209,N,07306.0821,W,0.0000,0.000,121214,,*3F
$GPRMC,203500,A,4046.8207,N,07306.0818,W,0.0000,0.000,121214,,*36
$GPRMC,203501,A,4046.8207,N,07306.0814,W,0.0000,0.000,121214,,*3B
$GPRMC,203502,A,4046.8208,N,07306.0811,W,0.0000,0.000,121214,,*32
$GPRMC,203503,A,4046.8208,N,07306.0809,W,0.0000,0.000,121214,,*3A
$GPRMC,203504,A,4046.8208,N,07306.0808,W,0.0000,0.000,121214,,*3C
$GPRMC,203505,A,4046.8207,N,07306.0809,W,0.0000,0.000,121214,,*33
$GPRMC,203506,A,4046.8204,N,07306.0811,W,0.0000,0.000,121214,,*3A
$GPRMC,203507,A,4046.8203,N,07306.0813,W,0.0000,0.000,121214,,*3E
$GPRMC,203508,A,4046.8203,N,07306.0816,W,0.0000,0.000,121214,,*34
$GPRMC,203509,A,4046.8203,N,07306.0821,W,0.0000,0.000,121214,,*31
$GPRMC,203510,A,4046.8202,N,07306.0825,W,0.0000,0.000,121214,,*3C
$GPRMC,203511,A,4046.8201,N,07306.0826,W,0.0000,0.000,121214,,*3D
$GPRMC,203512,A,4046.8198,N,07306.0827,W,0.0000,0.000,121214,,*3C
$GPRMC,203513,A,4046.8197,N,07306.0830,W,0.0000,0.000,121214,,*34
$GPRMC,203514,A,4046.8195,N,07306.0833,W,0.0000,0.000,121214,,*32
$GPRMC,203515,A,4046.8194,N,07306.0835,W,0.0000,0.000,121214,,*34
$GPRMC,203516,A,4046.8194,N,07306.0837,W,0.0000,0.000,121214,,*35
$GPRMC,203517,A,4046.8194,N,07306.0838,W,0.0000,0.000,121214,,*3B
$GPRMC,203518,A,4046.8194,N,07306.0837,W,0.0000,0.000,121214,,*3B
$GPRMC,203519,A,4046.8195,N,07306.0836,W,0.0000,0.000,121214,,*3A
$GPRMC,203520,A,4046.8196,N,07306.0835,W,0.0000,0.000,121214,,*30
$GPRMC,203521,A,4046.8198,N,07306.0835,W,0.0000,0.000,121214,,*3F
$GPRMC,203522,A,4046.8200,N,07306.0835,W,0.0000,0.000,121214,,*3E
$GPRMC,203523,A,4046.8202,N,07306.0834,W,0.0000,0.000,121214,,*3C
$GPRMC,203524,A,4046.8204,N,07306.0832,W,0.0000,0.000,121214,,*3B
$GPRMC,203525,A,4046.8205,N,07306.0831,W,0.0000,0.000,121214,,*38
$GPRMC,203526,A,4046.8207,N,07306.0830,W,0.0000,0.000,121214,,*38
$GPRMC,203527,A,4046.8209,N,07306.0830,W,0.0000,0.000,121214,,*37
$GPRMC,203528,A,4046.8212,N,07306.0831,W,0.0000,0.000,121214,,*33
$GPRMC,203529,A,4046.8214,N,07306.0833,W,0.0000,0.000,121214,,*36
$GPRMC,203530,A,4046.8218,N,07306.0831,W,0.0000,0.000,121214,,*30
$GPRMC,203531,A,4046.8220,N,07306.0830,W,0.0000,0.000,121214,,*3B
$GPRMC,203532,A,4046.8220,N,07306.0827,W,0.0000,0.000,121214,,*3E
$GPRMC,203533,A,4046.8220,N,07306.0826,W,0.0000,0.000,121214,,*3E
$GPRMC,203534,A,4046.8220,N,07306.0827,W,0.0000,0.000,121214,,*38
$GPRMC,203535,A,4046.8221,N,07306.0827,W,0.0000,0.000,121214,,*38
$GPRMC,203536,A,4046.8221,N,07306.0828,W,0.0000,0.000,121214,,*34


On Fri, Dec 12, 2014 at 3:11 PM, Gary E. Miller <address@hidden> wrote:
Yo Venkatesh!

On Fri, 12 Dec 2014 15:00:25 -0500
Venkatesh Sandilya <address@hidden> wrote:

> Yes, a good sky view. No obstructions what so ever. I see at least 7
> satellites in view in the xgps interface.

SHould be good then.

> Can I send you a screen
> shot of what I am seeing or output from any other program?

Send whatever, but the raw-er the better. cat, gpscat, gpsd -D are
all good.  An xgps that shows no fix is not much use since it does
not tell you what it is not seeing.

RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97701
        address@hidden  Tel:+1(541)382-8588

reply via email to

[Prev in Thread] Current Thread [Next in Thread]