Re: [gpsd-users] Galileo

[Paul]

> No GAGSV sentences seen using gpspipe or gpsmon /dev/ttyACM0,
> but they are being produced, according to ublox-centre and with
> stty -F /dev/ttyACM0 -echo &&  cat /dev/ttyACM0.

I get the same here.   gpspipe -r or -R shows GPGSV and GLGSV
but not GAGSV.

But with cat /dev/ttyACM0, the GAGSV are present, which is why
I always cat the port rather than use a gpsd client if I want
to be sure what the GPS is sending.

gpsd 3.15 (revision 3.15-2build1) on Ubuntu 16.04.4 LTS.

--
Paul Nicholson
--