gpsd-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

FW: ubxtool


From: rhowitt
Subject: FW: ubxtool
Date: Sat, 4 Apr 2020 20:40:38 -0400

I have been inconsistent in my use of respond all.

-----Original Message-----
From: address@hidden <address@hidden> 
Sent: Friday, April 3, 2020 1:42 PM
To: 'Gary E. Miller' <address@hidden>
Subject: RE: ubxtool

Strsvr has the ability to take an ntrip input stream  and then send that to
both the GPS and file.
I turned on the option to send the data to a file and recorded about 15
seconds of data.  The output is binary, so I don't know if it is of any use.
I have attached that file.  If you need a longer recording let me know.

Let me know if it is NOT of any use;  I have some other options that may
capture the data, if this data is not what you need.

Regards
Rick Howitt

-----Original Message-----
From: gpsd-users <gpsd-users-bounces+rhowitt=address@hidden> On Behalf
Of Gary E. Miller
Sent: Friday, April 3, 2020 11:42 AM
To: 'gpsd users' <address@hidden>
Subject: Re: ubxtool

Yo address@hidden!

On Fri, 3 Apr 2020 05:48:13 -0400
<address@hidden> wrote:

> >>-----Original Message-----
> >>From: gpsd-users <gpsd-users-bounces+rhowitt=address@hidden>
> >>On
> Behalf Of Gary E. Miller
> >>Sent: Friday, April 3, 2020 12:35 AM
> >>To: 'gpsd users' <address@hidden>
> >>Subject: Re: ubxtool
> 
> >>> I have been able to hook this same F9P up to a Windows system and 
> >>> use RTKlib's str2str utility with the same NTRIP caster and have 
> >>> gotten an RTK fix.
> 
> >>How do you know?  
> The development board has an LED attached to this pin.  When RTKlib's 
> strsrv runs and starts to receive RTCM3 packets, the LED starts to 
> Blink, and then after a short time the LED turns on solid.

That shines a light on solid evidence.

> To date, GPSD has never been able to cause this light to blink.

AFAIK, no one has gotten a 9-series and gpsd to do RTK.

Any way you could get serial captures of the data to the receiver for both
(gpsd and str2str) cases?

Maybe the receiver needs to be configured differently than gpsd configures
it.  Maybe the NTRIP is adjusted by str2str.  Just guessing out loud.

RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
        address@hidden  Tel:+1 541 382 8588

            Veritas liberabit vos. -- Quid est veritas?
    "If you can't measure it, you can't improve it." - Lord Kelvin

Attachment: strSVR1.log
Description: application/dflog


reply via email to

[Prev in Thread] Current Thread [Next in Thread]