Re: CSRS-PPP error

[Hans Mayer]

Yo Gary, et al,

On 10.04.23 21:31, Gary E. Miller wrote:

> Yo Hans!
>
> On Mon, 10 Apr 2023 21:20:19 +0200
> Hans Mayer <gpsd@ma.yer.at> wrote:
>
> > My environment, gpsd: 3.25.1~dev (revision
> > 3.25.1~dev-2023-03-30T16:56:51.579457) with u-blox ZED-F9P v 27.12
> Fine.
>
> What u-blox chip?

ZED-F9P v 27.12


>   What command lines for gpsd, gpsrinex.

/usr/local/sbin/gpsd -G -n -s 115200 /dev/serial0 /dev/pps0

gpsrinex -i 30 -n 120 -f today.obs localhost:gpsd:/dev/serial0


> I stronly recommend only a hour or tw capture until your get something
> working.

I have done this now with only one hour.

Not surprising, the error is the same.

I realised that my GNSS config is slightly different than described in 
the web. I have L2C for GPS and QZSS enabled as I didn't find a way to 
disable it. Is this maybe the problem ?

UBX-CFG-GNSS:
 msgVer 0  numTrkChHw 60 numTrkChUse 60 numConfigBlocks 6
  gnssId 0 TrkCh  8 maxTrCh 16 reserved 0 Flags x11110001
   GPS L1C/A L2C enabled
  gnssId 1 TrkCh  3 maxTrCh  3 reserved 0 Flags x01000000
   SBAS
  gnssId 2 TrkCh 10 maxTrCh 18 reserved 0 Flags x21000000
   Galileo
  gnssId 3 TrkCh  2 maxTrCh  5 reserved 0 Flags x11000000
   BeiDou
  gnssId 5 TrkCh  0 maxTrCh  4 reserved 0 Flags x15110001
   QZSS L1C/A L2C enabled
  gnssId 6 TrkCh  8 maxTrCh 12 reserved 0 Flags x11000000
   GLONASS

UBX-ACK-ACK:
  ACK to Class x06 (CFG) ID x3e (GNSS)

> Nope.  Rather than ask you 20 questions, just send us the RINEX file, or the
> raw u-blox file.

Great. Attached the file.


Kind regards

Hans

today.obs
Description: Text document