[ppc patch] remove BAT mappings

[Hollis Blanchard]

This patch removes the use of BAT registers to perform virtual memory
translations. BATs are a convenient way to avoid dealing with page
tables, however, there are two problems:
- Old World Macs apparently do not consider the BAT registers when
  performing /chosen/mmu "translate" calls. The Linux kernel requires
  that the "translate" result be accurate.
  (Given that New World Macs seem to have been booting ok without this, I
  can only assume that New World firmware was fixed.)
- BATs have been removed from POWER4 and POWER5 processors, used in
  pSeries servers.

Instead of performing large one-time mappings, we map what we need. We
do this by calling the "map" method of /chosen/mmu (after claiming the
space first).

I have tested this patch on Old World and New World Macintosh. With this
patch applied, Old World can successfully boot into Linux. :)

-Hollis

2004-10-15  Hollis Blanchard  <address@hidden>

        * boot/powerpc/ieee1275/cmain.c (cmain): Remove asm statements
        which initialized BAT registers.
        * boot/powerpc/ieee1275/ieee1275.c (IEEE1275_CALL_ENTRY_FN): Move
        to include/grub/powerpc/ieee1275/ieee1275.h.
        (grub_ieee1275_common_hdr): Likewise.
        (INIT_IEEE1275_COMMON): Likewise.
        * include/grub/powerpc/ieee1275/ieee1275.h (IEEE1275_CALL_ENTRY_FN):
        Move from boot/powerpc/ieee1275/ieee1275.c.
        (grub_ieee1275_common_hdr): Likewise.
        (INIT_IEEE1275_COMMON): Likewise.
        * kern/powerpc/ieee1275/openfw.c (grub_map): New function.
        (grub_mapclaim): Likewise.
        * loader/powerpc/ieee1275/linux.c (grub_load_linux): Use
        grub_mapclaim instead of grub_ieee1275_claim. Assign linux_addr by
        hand.

Index: boot/powerpc/ieee1275/cmain.c
===================================================================
RCS file: /cvsroot/grub/grub2/boot/powerpc/ieee1275/cmain.c,v
retrieving revision 1.3
diff -u -p -r1.3 cmain.c
--- boot/powerpc/ieee1275/cmain.c       12 Oct 2004 03:56:10 -0000      1.3
+++ boot/powerpc/ieee1275/cmain.c       15 Oct 2004 22:19:53 -0000
@@ -55,7 +55,6 @@ cmain (uint32_t r3, uint32_t r4 __attrib
   char **argv, args[256];
   grub_ieee1275_phandle_t chosen;
   int argc = 0, actual;
-  long batl, batu;
 
   if (r5 == 0xdeadbeef)
     {
@@ -81,27 +80,6 @@ cmain (uint32_t r3, uint32_t r4 __attrib
       grub_ieee1275_entry_fn = (intptr_t (*)(void *)) r5;
     }
 
-  /* Initialize BAT registers to unmapped to not generate overlapping
-     mappings below.  */
-  asm volatile ("mtibatu 0,%0" :: "r"(0));
-  asm volatile ("mtibatu 1,%0" :: "r"(0));
-  asm volatile ("mtibatu 2,%0" :: "r"(0));
-  asm volatile ("mtibatu 3,%0" :: "r"(0));
-  asm volatile ("mtdbatu 0,%0" :: "r"(0));
-  asm volatile ("mtdbatu 1,%0" :: "r"(0));
-  asm volatile ("mtdbatu 2,%0" :: "r"(0));
-  asm volatile ("mtdbatu 3,%0" :: "r"(0));
-
-  /* Set up initial BAT table to only map the lowest 256 MB area.  */
-  batl = 0x00000000 | 0x10   | 0x02;
-  batu = 0x00000000 | 0x1ffc | 0x02;
-
-  /* IBAT0 used for initial 256 MB segment */
-  asm volatile ("mtibatl 3,%0; mtibatu 3,%1" :: "r" (batl), "r" (batu));
-  /* DBAT0 used similar */
-  asm volatile ("mtdbatl 3,%0; mtdbatu 3,%1" :: "r" (batl), "r" (batu));
-  asm ("isync");
-
   /* If any argument was passed to the kernel (us), they are
      put in the bootargs property of /chosen.  The string can
      be null (just the nul-character), so check that the size
Index: boot/powerpc/ieee1275/ieee1275.c
===================================================================
RCS file: /cvsroot/grub/grub2/boot/powerpc/ieee1275/ieee1275.c,v
retrieving revision 1.7
diff -u -p -r1.7 ieee1275.c
--- boot/powerpc/ieee1275/ieee1275.c    13 Oct 2004 23:43:43 -0000      1.7
+++ boot/powerpc/ieee1275/ieee1275.c    15 Oct 2004 22:19:53 -0000
@@ -26,25 +26,6 @@
 
 intptr_t (*grub_ieee1275_entry_fn) (void *);
 
-#ifndef IEEE1275_CALL_ENTRY_FN
-#define IEEE1275_CALL_ENTRY_FN(args) (*grub_ieee1275_entry_fn) (args)
-#endif
-
-/* All backcalls to the firmware is done by calling an entry function 
-   which was passed to us from the bootloader.  When doing the backcall, 
-   a structure is passed which specifies what the firmware should do.  
-   NAME is the requested service.  NR_INS and NR_OUTS is the number of
-   passed arguments and the expected number of return values, resp. */
-struct grub_ieee1275_common_hdr
-{
-  char *name;
-  int nr_ins;
-  int nr_outs;
-};
-
-#define INIT_IEEE1275_COMMON(p, xname, xins, xouts) \
-  (p)->name = xname; (p)->nr_ins = xins; (p)->nr_outs = xouts
-
 /* FIXME is this function needed? */
 grub_uint32_t
 grub_ieee1275_decode_int_4 (unsigned char *p)
Index: include/grub/powerpc/ieee1275/ieee1275.h
===================================================================
RCS file: /cvsroot/grub/grub2/include/grub/powerpc/ieee1275/ieee1275.h,v
retrieving revision 1.8
diff -u -p -r1.8 ieee1275.h
--- include/grub/powerpc/ieee1275/ieee1275.h    15 Oct 2004 02:29:11 -0000      
1.8
+++ include/grub/powerpc/ieee1275/ieee1275.h    15 Oct 2004 22:19:54 -0000
@@ -39,6 +39,27 @@ struct grub_ieee1275_mem_region 
   unsigned int size;
 };
 
+extern intptr_t (*grub_ieee1275_entry_fn) (void *);
+
+#ifndef IEEE1275_CALL_ENTRY_FN
+#define IEEE1275_CALL_ENTRY_FN(args) (*grub_ieee1275_entry_fn) (args)
+#endif
+
+/* All backcalls to the firmware is done by calling an entry function 
+   which was passed to us from the bootloader.  When doing the backcall, 
+   a structure is passed which specifies what the firmware should do.  
+   NAME is the requested service.  NR_INS and NR_OUTS is the number of
+   passed arguments and the expected number of return values, resp. */
+struct grub_ieee1275_common_hdr
+{
+  char *name;
+  int nr_ins;
+  int nr_outs;
+};
+
+#define INIT_IEEE1275_COMMON(p, xname, xins, xouts) \
+  (p)->name = xname; (p)->nr_ins = xins; (p)->nr_outs = xouts
+
 /* FIXME jrydberg: is this correct cell types? */
 typedef intptr_t grub_ieee1275_ihandle_t;
 typedef intptr_t grub_ieee1275_phandle_t;
@@ -103,6 +124,7 @@ grub_err_t EXPORT_FUNC(grub_devalias_ite
      (int (*hook) (struct grub_ieee1275_devalias *alias));
 grub_err_t EXPORT_FUNC(grub_children_iterate) (char *devpath,
      int (*hook) (struct grub_ieee1275_devalias *alias));
+int EXPORT_FUNC(grub_claimmap) (grub_addr_t addr, grub_size_t size);
 
 void EXPORT_FUNC(abort) (void);
 
Index: kern/powerpc/ieee1275/openfw.c
===================================================================
RCS file: /cvsroot/grub/grub2/kern/powerpc/ieee1275/openfw.c,v
retrieving revision 1.3
diff -u -p -r1.3 openfw.c
--- kern/powerpc/ieee1275/openfw.c      13 Oct 2004 23:43:44 -0000      1.3
+++ kern/powerpc/ieee1275/openfw.c      15 Oct 2004 22:19:55 -0000
@@ -137,3 +137,57 @@ grub_devalias_iterate (int (*hook) (stru
 
   return 0;
 }
+
+/* Call the "map" method of /chosen/mmu.  */
+int
+grub_map (grub_addr_t phys, grub_addr_t virt, grub_uint32_t size,
+                  grub_uint8_t mode)
+{
+  struct map_args {
+    struct grub_ieee1275_common_hdr common;
+    char *method;
+    grub_ieee1275_ihandle_t ihandle;
+    grub_uint32_t mode;
+    grub_uint32_t size;
+    grub_uint32_t virt;
+    grub_uint32_t phys;
+    int catch_result;
+  } args;
+  grub_ieee1275_ihandle_t mmu;
+  grub_ieee1275_ihandle_t chosen;
+  int len;
+
+  grub_ieee1275_finddevice ("/chosen", &chosen);
+  if (chosen == 0)
+    return -1;
+
+  grub_ieee1275_get_property (chosen, "mmu", &mmu, sizeof mmu, &len);
+  if (len != sizeof mmu)
+    return -1;
+
+  INIT_IEEE1275_COMMON (&args.common, "call-method", 6, 1);
+  args.method = "map";
+  args.ihandle = mmu;
+  args.phys = phys;
+  args.virt = virt;
+  args.size = size;
+  args.mode = mode; /* Format is WIMG0PP.  */
+
+  if (IEEE1275_CALL_ENTRY_FN (&args) == -1)
+    return -1;
+
+  return args.catch_result;
+}
+
+int
+grub_claimmap (grub_addr_t addr, grub_size_t size)
+{
+  if (grub_ieee1275_claim (addr, size, 0, 0))
+    return -1;
+  if (grub_map (addr, addr, size, 0x00))
+    {
+      grub_ieee1275_release (addr, size);
+      return -1;
+    }
+  return 0;
+}
Index: loader/powerpc/ieee1275/linux.c
===================================================================
RCS file: /cvsroot/grub/grub2/loader/powerpc/ieee1275/linux.c,v
retrieving revision 1.3
diff -u -p -r1.3 linux.c
--- loader/powerpc/ieee1275/linux.c     3 Oct 2004 09:19:10 -0000       1.3
+++ loader/powerpc/ieee1275/linux.c     15 Oct 2004 22:19:56 -0000
@@ -188,12 +188,13 @@ grub_load_linux (int argc, char *argv[])
   /* Reserve memory for the kernel.  */
   linux_size += 0x100000;
   
-  if (grub_ieee1275_claim (entry, linux_size, 0, &linux_addr) == -1)
+  if (grub_claimmap (entry, linux_size) == -1)
     {
       grub_error (GRUB_ERR_OUT_OF_MEMORY, "Can not claim memory");
       goto fail;
     }
-  
+  linux_addr = entry;
+
   /* Load every loadable segment in memory.  */
   for (i = 0; i < ehdr.e_phnum; i++)
     {