Re: Various build failures in current bzr tree

[Vladimir 'φ-coder/phcoder' Serbinenko]

On 10.02.2012 20:12, Lennart Sorensen wrote:
> On Fri, Feb 10, 2012 at 08:01:23PM +0100, Vladimir 'φ-coder/phcoder' Serbinenko 
> wrote:
> > I agree that it should be fixed but the question is how.
> I can't think of a way that would work if the disks were in fact using
> different setups, which they could be.
>
> > No
> OK, fair enough if the below worked then.
>
> > >    Currently it only
> > > tries to include partition table support for grub_device, which being
> > > an md raid returns nothing.
> > This is a problem. It should return the partmap of underlying device
> > and we have code for that. What does grub-probe -t partmap -d
> > /dev/mdX is?
> address@hidden:~# grub-probe -t partmap -d /dev/md0
>
> address@hidden:~#
>
> So that would be a problem of course.
>
> address@hidden:~# cat /proc/mdstat
> Personalities : [raid1] [raid6] [raid5] [raid4]
> md1 : active raid5 sda3[0] sdb3[1]
>        284773376 blocks super 1.2 level 5, 512k chunk, algorithm 2 [3/2] [UU_]
>
> md0 : active raid1 sda2[0] sdb2[1]
>        976884 blocks super 1.2 [2/2] [UU]
>
> unused devices:<none>
>
> md0 is /boot
> md1 is /
>
> When I do the final install I will probably but lvm on md1 and put /
> and swap and other things on that.


--
Regards
Vladimir 'φ-coder/phcoder' Serbinenko

1.diff
Description: Text Data