Hi,
Adding Sudhakar and Glenn...
On Thu, Aug 11, 2022 at 02:40:58PM -0300, Diego Domingos wrote:
Hello,
This is an addition to the series sent from Daniel Axtens
(https://lists.gnu.org/archive/html/grub-devel/2022-04/msg00064.html).
Patch 'ieee1275: request memory with ibm,client-architecture-support'
implements vectors 1-4 of client-architecture-support negotiation
However, during some tests, we found this can be a problem if:
- we have more than 64 CPUs
- Hardware Management Console (HMC) is configured to minimum of CPUs >64 (for
example, min of 200 CPUs)
- Grub needs to request memory.
If vector 5 is not implemented, Power Hypervisor will consider the default
value for vector 5 and 64 will bet set as the maximum
number of CPUs supported by the OS, causing the machine to fail to init.
Today we support 256 CPUs (max) on Power, so we need to implement vector 5 and
set the MAX CPUs bits to this value.
The patches 11-15 aren't merged to the grub tree yet, so I'm sending those
patches again together with my patch to implement vector 5
on top of them.
The patches 11-15 contains the following:
Daniel Axtens (4):
ieee1275: request memory with ibm,client-architecture-support
ieee1275: drop len -= 1 quirk in heap_init
ieee1275: support runtime memory claiming
[RFC] Add memtool module with memory allocation stress-test
Stefan Berger (1):
ibmvtpm: Add support for trusted boot using a vTPM 2.0
I went through all patches and cannot see major problems with them.
Though there are a lot of minor things which have to be fixed. Sadly due
to number of them I cannot simply ignore that.
Here is the list of the issues:
- functions calls/sizeof(): e.g. "grub_printf()" should be replaced with
"grub_printf ()",
add space before "(", in the code; though I am OK with the former in
comments and
commit messages,
- casts: e.g. "*(grub_uint32_t *)data" should be replaced with "*(grub_uint32_t
*) data",
add space between ")" and "data",
- s/__attribute__((packed))/GRUB_PACKED/
- if you use grub_err_t type please test for GRUB_ERR_NONE instead of !err
or err;
please do not use plain numbers, e.g. 0 to substitute GRUB_ERR_NONE,
- if you test pointers for NULL please test using NULL constant instead of
e.g. !ptr
- if you use a value often please define constant for it; good candidate for
such
change is at least 0x30000000 in the patch #3; if constant definition is
an overkill
please comment what given numbers/strings mean or at least where they come
from,
- please do not use "//" for comments,
- I am OK with lines a bit longer than 80; so, please do not wrap
lines too early,