[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
branch master updated: gnu: u-boot: Update to 2020.07.
|
From: |
guix-commits |
|
Subject: |
branch master updated: gnu: u-boot: Update to 2020.07. |
|
Date: |
Thu, 09 Jul 2020 20:24:20 -0400 |
This is an automated email from the git hooks/post-receive script.
vagrantc pushed a commit to branch master
in repository guix.
The following commit(s) were added to refs/heads/master by this push:
new bce3c97 gnu: u-boot: Update to 2020.07.
bce3c97 is described below
commit bce3c9748b4ba47cdb915492e5c7baaf3d3a2511
Author: Vagrant Cascadian <vagrant@debian.org>
AuthorDate: Thu Jul 9 16:07:30 2020 -0700
gnu: u-boot: Update to 2020.07.
* gnu/packages/bootloaders (u-boot): Update to 2020.07.
(u-boot-pinebook-pro-rk3399): Remove patches.
* gnu/packages/patches:
u-boot-DT-for-Pinebook-Pro.patch,
u-boot-add-boe-nv140fhmn49-display.patch,
u-boot-gpio-keys-binding-cons.patch, u-boot-leds-common-binding-con.patch,
u-boot-support-Pinebook-Pro-laptop.patch,
u-boot-video-rockchip-fix-build.patch: Remove patches.
u-boot-riscv64-fix-extlinux.patch: Refresh patch.
* gnu/local.mk (dist_patch_DATA): Update accordingly.
---
gnu/local.mk | 6 -
gnu/packages/bootloaders.scm | 13 +-
.../patches/u-boot-DT-for-Pinebook-Pro.patch | 1132 --------------------
.../u-boot-add-boe-nv140fhmn49-display.patch | 29 -
.../patches/u-boot-gpio-keys-binding-cons.patch | 37 -
.../patches/u-boot-leds-common-binding-con.patch | 115 --
.../patches/u-boot-riscv64-fix-extlinux.patch | 14 -
.../u-boot-support-Pinebook-Pro-laptop.patch | 367 -------
.../patches/u-boot-video-rockchip-fix-build.patch | 48 -
9 files changed, 2 insertions(+), 1759 deletions(-)
diff --git a/gnu/local.mk b/gnu/local.mk
index a277e63..cecc8bc 100644
--- a/gnu/local.mk
+++ b/gnu/local.mk
@@ -1568,12 +1568,6 @@ dist_patch_DATA =
\
%D%/packages/patches/tuxpaint-stamps-path.patch \
%D%/packages/patches/twinkle-bcg729.patch \
%D%/packages/patches/u-boot-riscv64-fix-extlinux.patch \
- %D%/packages/patches/u-boot-DT-for-Pinebook-Pro.patch \
- %D%/packages/patches/u-boot-add-boe-nv140fhmn49-display.patch \
- %D%/packages/patches/u-boot-gpio-keys-binding-cons.patch \
- %D%/packages/patches/u-boot-leds-common-binding-con.patch \
- %D%/packages/patches/u-boot-support-Pinebook-Pro-laptop.patch \
- %D%/packages/patches/u-boot-video-rockchip-fix-build.patch \
%D%/packages/patches/ucx-tcp-iface-ioctl.patch \
%D%/packages/patches/udiskie-no-appindicator.patch \
%D%/packages/patches/ungoogled-chromium-system-jsoncpp.patch \
diff --git a/gnu/packages/bootloaders.scm b/gnu/packages/bootloaders.scm
index 07b406b..7692382 100644
--- a/gnu/packages/bootloaders.scm
+++ b/gnu/packages/bootloaders.scm
@@ -446,7 +446,7 @@ tree binary files. These are board description files used
by Linux and BSD.")
(define u-boot
(package
(name "u-boot")
- (version "2020.04")
+ (version "2020.07")
(source (origin
(method url-fetch)
(uri (string-append
@@ -454,7 +454,7 @@ tree binary files. These are board description files used
by Linux and BSD.")
"u-boot-" version ".tar.bz2"))
(sha256
(base32
- "0wjkasnz87q86hx93inspdjfjsinmxi87bcvj30c773x0fpjlwzy"))))
+ "0sjzy262x93aaqd6z24ziaq19xjjjk5f577ivf768vmvwsgbzxf1"))))
(native-inputs
`(("bc" ,bc)
("bison" ,bison)
@@ -885,15 +885,6 @@ to Novena upstream, does not load u-boot.img from the
first partition.")
(let ((base (make-u-boot-package "pinebook-pro-rk3399" "aarch64-linux-gnu")))
(package
(inherit base)
- (source (origin
- (inherit (package-source u-boot))
- (patches
- (search-patches "u-boot-add-boe-nv140fhmn49-display.patch"
- "u-boot-gpio-keys-binding-cons.patch"
- "u-boot-leds-common-binding-con.patch"
- "u-boot-DT-for-Pinebook-Pro.patch"
- "u-boot-support-Pinebook-Pro-laptop.patch"
- "u-boot-video-rockchip-fix-build.patch"))))
(arguments
(substitute-keyword-arguments (package-arguments base)
((#:phases phases)
diff --git a/gnu/packages/patches/u-boot-DT-for-Pinebook-Pro.patch
b/gnu/packages/patches/u-boot-DT-for-Pinebook-Pro.patch
deleted file mode 100644
index f88d12f..0000000
--- a/gnu/packages/patches/u-boot-DT-for-Pinebook-Pro.patch
+++ /dev/null
@@ -1,1132 +0,0 @@
-From b128c2e0b480ee992fabe554d19cd471efb11095 Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Mon, 20 Apr 2020 20:27:35 +0100
-Origin:
https://patchwork.ozlabs.org/project/uboot/patch/20200420192736.962307-5-pbrobinson@gmail.com/
-Subject: [PATCH 4/5] arm: dts: rockchip: Add initial DT for Pinebook Pro
-
-Sync initial support for Pinebook Pro device tree from Linux 5.7-rc1.
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
----
- arch/arm/dts/Makefile | 1 +
- arch/arm/dts/rk3399-pinebook-pro.dts | 1096 ++++++++++++++++++++++++++
- 2 files changed, 1097 insertions(+)
- create mode 100644 arch/arm/dts/rk3399-pinebook-pro.dts
-
-diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
-index 820ee9733a..885bf0ef58 100644
---- a/arch/arm/dts/Makefile
-+++ b/arch/arm/dts/Makefile
-@@ -125,6 +125,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \
- rk3399-nanopi-m4.dtb \
- rk3399-nanopi-neo4.dtb \
- rk3399-orangepi.dtb \
-+ rk3399-pinebook-pro.dtb \
- rk3399-puma-ddr1333.dtb \
- rk3399-puma-ddr1600.dtb \
- rk3399-puma-ddr1866.dtb \
-diff --git a/arch/arm/dts/rk3399-pinebook-pro.dts
b/arch/arm/dts/rk3399-pinebook-pro.dts
-new file mode 100644
-index 0000000000..294d21bf45
---- /dev/null
-+++ b/arch/arm/dts/rk3399-pinebook-pro.dts
-@@ -0,0 +1,1096 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
-+ * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
-+ * Copyright (c) 2020 Tobias Schramm <t.schramm@manjaro.org>
-+ */
-+
-+/dts-v1/;
-+#include <dt-bindings/input/gpio-keys.h>
-+#include <dt-bindings/input/linux-event-codes.h>
-+#include <dt-bindings/pwm/pwm.h>
-+#include <dt-bindings/usb/pd.h>
-+#include <dt-bindings/leds/common.h>
-+#include "rk3399.dtsi"
-+#include "rk3399-opp.dtsi"
-+
-+/ {
-+ model = "Pine64 Pinebook Pro";
-+ compatible = "pine64,pinebook-pro", "rockchip,rk3399";
-+
-+ chosen {
-+ stdout-path = "serial2:1500000n8";
-+ };
-+
-+ backlight: edp-backlight {
-+ compatible = "pwm-backlight";
-+ power-supply = <&vcc_12v>;
-+ pwms = <&pwm0 0 740740 0>;
-+ };
-+
-+ edp_panel: edp-panel {
-+ compatible = "boe,nv140fhmn49";
-+ backlight = <&backlight>;
-+ enable-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&panel_en_gpio>;
-+ power-supply = <&vcc3v3_panel>;
-+
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ port@0 {
-+ reg = <0>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ panel_in_edp: endpoint@0 {
-+ reg = <0>;
-+ remote-endpoint = <&edp_out_panel>;
-+ };
-+ };
-+ };
-+ };
-+
-+ /*
-+ * Use separate nodes for gpio-keys to allow for selective deactivation
-+ * of wakeup sources via sysfs without disabling the whole key
-+ */
-+ gpio-key-lid {
-+ compatible = "gpio-keys";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&lidbtn_gpio>;
-+
-+ lid {
-+ debounce-interval = <20>;
-+ gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_LOW>;
-+ label = "Lid";
-+ linux,code = <SW_LID>;
-+ linux,input-type = <EV_SW>;
-+ wakeup-event-action = <EV_ACT_DEASSERTED>;
-+ wakeup-source;
-+ };
-+ };
-+
-+ gpio-key-power {
-+ compatible = "gpio-keys";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pwrbtn_gpio>;
-+
-+ power {
-+ debounce-interval = <20>;
-+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
-+ label = "Power";
-+ linux,code = <KEY_POWER>;
-+ wakeup-source;
-+ };
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pwrled_gpio &slpled_gpio>;
-+
-+ green-led {
-+ color = <LED_COLOR_ID_GREEN>;
-+ default-state = "on";
-+ function = LED_FUNCTION_POWER;
-+ gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
-+ label = "green:power";
-+ };
-+
-+ red-led {
-+ color = <LED_COLOR_ID_RED>;
-+ default-state = "off";
-+ function = LED_FUNCTION_STANDBY;
-+ gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
-+ label = "red:standby";
-+ panic-indicator;
-+ retain-state-suspended;
-+ };
-+ };
-+
-+ /* Power sequence for SDIO WiFi module */
-+ sdio_pwrseq: sdio-pwrseq {
-+ compatible = "mmc-pwrseq-simple";
-+ clocks = <&rk808 1>;
-+ clock-names = "ext_clock";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&wifi_enable_h_gpio>;
-+ post-power-on-delay-ms = <100>;
-+ power-off-delay-us = <500000>;
-+
-+ /* WL_REG_ON on module */
-+ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ /* Audio components */
-+ es8316-sound {
-+ compatible = "simple-audio-card";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&hp_det_gpio>;
-+ simple-audio-card,name = "rockchip,es8316-codec";
-+ simple-audio-card,format = "i2s";
-+ simple-audio-card,mclk-fs = <256>;
-+
-+ simple-audio-card,widgets =
-+ "Microphone", "Mic Jack",
-+ "Headphone", "Headphones",
-+ "Speaker", "Speaker";
-+ simple-audio-card,routing =
-+ "MIC1", "Mic Jack",
-+ "Headphones", "HPOL",
-+ "Headphones", "HPOR",
-+ "Speaker Amplifier INL", "HPOL",
-+ "Speaker Amplifier INR", "HPOR",
-+ "Speaker", "Speaker Amplifier OUTL",
-+ "Speaker", "Speaker Amplifier OUTR";
-+
-+ simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0
GPIO_ACTIVE_HIGH>;
-+ simple-audio-card,aux-devs = <&speaker_amp>;
-+ simple-audio-card,pin-switches = "Speaker";
-+
-+ simple-audio-card,cpu {
-+ sound-dai = <&i2s1>;
-+ };
-+
-+ simple-audio-card,codec {
-+ sound-dai = <&es8316>;
-+ };
-+ };
-+
-+ speaker_amp: speaker-amplifier {
-+ compatible = "simple-audio-amplifier";
-+ enable-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
-+ sound-name-prefix = "Speaker Amplifier";
-+ VCC-supply = <&pa_5v>;
-+ };
-+
-+ /* Power tree */
-+ /* Root power source */
-+ vcc_sysin: vcc-sysin {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vcc_sysin";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ };
-+
-+ /* Regulators supplied by vcc_sysin */
-+ /* LCD backlight supply */
-+ vcc_12v: vcc-12v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vcc_12v";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <12000000>;
-+ regulator-max-microvolt = <12000000>;
-+ vin-supply = <&vcc_sysin>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ /* Main 3.3 V supply */
-+ vcc3v3_sys: wifi_bat: vcc3v3-sys {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vcc3v3_sys";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ vin-supply = <&vcc_sysin>;
-+
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ };
-+ };
-+
-+ /* 5 V USB power supply */
-+ vcc5v0_usb: pa_5v: vcc5v0-usb-regulator {
-+ compatible = "regulator-fixed";
-+ enable-active-high;
-+ gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pwr_5v_gpio>;
-+ regulator-name = "vcc5v0_usb";
-+ regulator-always-on;
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ vin-supply = <&vcc_sysin>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ /* RK3399 logic supply */
-+ vdd_log: vdd-log {
-+ compatible = "pwm-regulator";
-+ pwms = <&pwm2 0 25000 1>;
-+ regulator-name = "vdd_log";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <1400000>;
-+ vin-supply = <&vcc_sysin>;
-+
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ };
-+ };
-+
-+ /* Regulators supplied by vcc3v3_sys */
-+ /* 0.9 V supply, always on */
-+ vcc_0v9: vcc-0v9 {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vcc_0v9";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <900000>;
-+ regulator-max-microvolt = <900000>;
-+ vin-supply = <&vcc3v3_sys>;
-+ };
-+
-+ /* S3 1.8 V supply, switched by vcc1v8_s3 */
-+ vcca1v8_s3: vcc1v8-s3 {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vcca1v8_s3";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ vin-supply = <&vcc3v3_sys>;
-+ };
-+
-+ /* micro SD card power */
-+ vcc3v0_sd: vcc3v0-sd {
-+ compatible = "regulator-fixed";
-+ enable-active-high;
-+ gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sdmmc0_pwr_h_gpio>;
-+ regulator-name = "vcc3v0_sd";
-+ regulator-always-on;
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+ vin-supply = <&vcc3v3_sys>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ /* LCD panel power, called VCC3V3_S0 in schematic */
-+ vcc3v3_panel: vcc3v3-panel {
-+ compatible = "regulator-fixed";
-+ enable-active-high;
-+ gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&lcdvcc_en_gpio>;
-+ regulator-name = "vcc3v3_panel";
-+ regulator-always-on;
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-enable-ramp-delay = <100000>;
-+ vin-supply = <&vcc3v3_sys>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ /* M.2 adapter power, switched by vcc1v8_s3 */
-+ vcc3v3_ssd: vcc3v3-ssd {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vcc3v3_ssd";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ vin-supply = <&vcc3v3_sys>;
-+ };
-+
-+ /* Regulators supplied by vcc5v0_usb */
-+ /* USB 3 port power supply regulator */
-+ vcc5v0_otg: vcc5v0-otg {
-+ compatible = "regulator-fixed";
-+ enable-active-high;
-+ gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&vcc5v0_host_en_gpio>;
-+ regulator-name = "vcc5v0_otg";
-+ regulator-always-on;
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ vin-supply = <&vcc5v0_usb>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ /* Regulators supplied by vcc5v0_usb */
-+ /* Type C port power supply regulator */
-+ vbus_5vout: vbus_typec: vbus-5vout {
-+ compatible = "regulator-fixed";
-+ enable-active-high;
-+ gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&vcc5v0_typec0_en_gpio>;
-+ regulator-name = "vbus_5vout";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ vin-supply = <&vcc5v0_usb>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ /* Regulators supplied by vcc_1v8 */
-+ /* Primary 0.9 V LDO */
-+ vcca0v9_s3: vcca0v9-s3 {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vcc0v9_s3";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ vin-supply = <&vcc_1v8>;
-+
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ };
-+ };
-+
-+ mains_charger: dc-charger {
-+ compatible = "gpio-charger";
-+ charger-type = "mains";
-+ gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_LOW>;
-+
-+ /* Also triggered by USB charger */
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&dc_det_gpio>;
-+ };
-+};
-+
-+&cdn_dp {
-+ status = "okay";
-+};
-+
-+&cpu_b0 {
-+ cpu-supply = <&vdd_cpu_b>;
-+};
-+
-+&cpu_b1 {
-+ cpu-supply = <&vdd_cpu_b>;
-+};
-+
-+&cpu_l0 {
-+ cpu-supply = <&vdd_cpu_l>;
-+};
-+
-+&cpu_l1 {
-+ cpu-supply = <&vdd_cpu_l>;
-+};
-+
-+&cpu_l2 {
-+ cpu-supply = <&vdd_cpu_l>;
-+};
-+
-+&cpu_l3 {
-+ cpu-supply = <&vdd_cpu_l>;
-+};
-+
-+&edp {
-+ force-hpd;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&edp_hpd>;
-+ status = "okay";
-+
-+ ports {
-+ edp_out: port@1 {
-+ reg = <1>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ edp_out_panel: endpoint@0 {
-+ reg = <0>;
-+ remote-endpoint = <&panel_in_edp>;
-+ };
-+ };
-+ };
-+};
-+
-+&emmc_phy {
-+ status = "okay";
-+};
-+
-+&gpu {
-+ mali-supply = <&vdd_gpu>;
-+ status = "okay";
-+};
-+
-+&hdmi_sound {
-+ status = "okay";
-+};
-+
-+&i2c0 {
-+ clock-frequency = <400000>;
-+ i2c-scl-falling-time-ns = <4>;
-+ i2c-scl-rising-time-ns = <168>;
-+ status = "okay";
-+
-+ rk808: pmic@1b {
-+ compatible = "rockchip,rk808";
-+ reg = <0x1b>;
-+ #clock-cells = <1>;
-+ clock-output-names = "xin32k", "rk808-clkout2";
-+ interrupt-parent = <&gpio3>;
-+ interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pmic_int_l_gpio>;
-+ rockchip,system-power-controller;
-+ wakeup-source;
-+
-+ vcc1-supply = <&vcc_sysin>;
-+ vcc2-supply = <&vcc_sysin>;
-+ vcc3-supply = <&vcc_sysin>;
-+ vcc4-supply = <&vcc_sysin>;
-+ vcc6-supply = <&vcc_sysin>;
-+ vcc7-supply = <&vcc_sysin>;
-+ vcc8-supply = <&vcc3v3_sys>;
-+ vcc9-supply = <&vcc_sysin>;
-+ vcc10-supply = <&vcc_sysin>;
-+ vcc11-supply = <&vcc_sysin>;
-+ vcc12-supply = <&vcc3v3_sys>;
-+ vcc13-supply = <&vcc_sysin>;
-+ vcc14-supply = <&vcc_sysin>;
-+
-+ regulators {
-+ /* rk3399 center logic supply */
-+ vdd_center: DCDC_REG1 {
-+ regulator-name = "vdd_center";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <750000>;
-+ regulator-max-microvolt = <1350000>;
-+ regulator-ramp-delay = <6001>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vdd_cpu_l: DCDC_REG2 {
-+ regulator-name = "vdd_cpu_l";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <750000>;
-+ regulator-max-microvolt = <1350000>;
-+ regulator-ramp-delay = <6001>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vcc_ddr: DCDC_REG3 {
-+ regulator-name = "vcc_ddr";
-+ regulator-always-on;
-+ regulator-boot-on;
-+
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ };
-+ };
-+
-+ vcc_1v8: vcc_wl: DCDC_REG4 {
-+ regulator-name = "vcc_1v8";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ regulator-suspend-microvolt = <1800000>;
-+ };
-+ };
-+
-+ /* not used */
-+ LDO_REG1 {
-+ };
-+
-+ /* not used */
-+ LDO_REG2 {
-+ };
-+
-+ vcc1v8_pmupll: LDO_REG3 {
-+ regulator-name = "vcc1v8_pmupll";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ regulator-suspend-microvolt = <1800000>;
-+ };
-+ };
-+
-+ vcc_sdio: LDO_REG4 {
-+ regulator-name = "vcc_sdio";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3000000>;
-+
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ regulator-suspend-microvolt = <3000000>;
-+ };
-+ };
-+
-+ vcca3v0_codec: LDO_REG5 {
-+ regulator-name = "vcca3v0_codec";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vcc_1v5: LDO_REG6 {
-+ regulator-name = "vcc_1v5";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <1500000>;
-+ regulator-max-microvolt = <1500000>;
-+
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ regulator-suspend-microvolt = <1500000>;
-+ };
-+ };
-+
-+ vcca1v8_codec: LDO_REG7 {
-+ regulator-name = "vcca1v8_codec";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vcc_3v0: LDO_REG8 {
-+ regulator-name = "vcc_3v0";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ regulator-suspend-microvolt = <3000000>;
-+ };
-+ };
-+
-+ vcc3v3_s3: SWITCH_REG1 {
-+ regulator-name = "vcc3v3_s3";
-+ regulator-always-on;
-+ regulator-boot-on;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vcc3v3_s0: SWITCH_REG2 {
-+ regulator-name = "vcc3v3_s0";
-+ regulator-always-on;
-+ regulator-boot-on;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+ };
-+ };
-+
-+ vdd_cpu_b: regulator@40 {
-+ compatible = "silergy,syr827";
-+ reg = <0x40>;
-+ fcs,suspend-voltage-selector = <1>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&vsel1_gpio>;
-+ regulator-name = "vdd_cpu_b";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <712500>;
-+ regulator-max-microvolt = <1500000>;
-+ regulator-ramp-delay = <1000>;
-+ vin-supply = <&vcc_1v8>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vdd_gpu: regulator@41 {
-+ compatible = "silergy,syr828";
-+ reg = <0x41>;
-+ fcs,suspend-voltage-selector = <1>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&vsel2_gpio>;
-+ regulator-name = "vdd_gpu";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <712500>;
-+ regulator-max-microvolt = <1500000>;
-+ regulator-ramp-delay = <1000>;
-+ vin-supply = <&vcc_1v8>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+};
-+
-+&i2c1 {
-+ clock-frequency = <100000>;
-+ i2c-scl-falling-time-ns = <4>;
-+ i2c-scl-rising-time-ns = <168>;
-+ status = "okay";
-+
-+ es8316: es8316@11 {
-+ compatible = "everest,es8316";
-+ reg = <0x11>;
-+ clocks = <&cru SCLK_I2S_8CH_OUT>;
-+ clock-names = "mclk";
-+ #sound-dai-cells = <0>;
-+ };
-+};
-+
-+&i2c3 {
-+ i2c-scl-falling-time-ns = <15>;
-+ i2c-scl-rising-time-ns = <450>;
-+ status = "okay";
-+};
-+
-+&i2c4 {
-+ i2c-scl-falling-time-ns = <20>;
-+ i2c-scl-rising-time-ns = <600>;
-+ status = "okay";
-+
-+ fusb0: fusb30x@22 {
-+ compatible = "fcs,fusb302";
-+ reg = <0x22>;
-+ fcs,int_n = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&fusb0_int_gpio>;
-+ vbus-supply = <&vbus_typec>;
-+
-+ connector {
-+ compatible = "usb-c-connector";
-+ data-role = "host";
-+ label = "USB-C";
-+ op-sink-microwatt = <1000000>;
-+ power-role = "dual";
-+ sink-pdos =
-+ <PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>;
-+ source-pdos =
-+ <PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>;
-+ try-power-role = "sink";
-+
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ port@0 {
-+ reg = <0>;
-+
-+ usbc_hs: endpoint {
-+ remote-endpoint =
-+ <&u2phy0_typec_hs>;
-+ };
-+ };
-+
-+ port@1 {
-+ reg = <1>;
-+
-+ usbc_ss: endpoint {
-+ remote-endpoint =
-+ <&tcphy0_typec_ss>;
-+ };
-+ };
-+
-+ port@2 {
-+ reg = <2>;
-+
-+ usbc_dp: endpoint {
-+ remote-endpoint =
-+ <&tcphy0_typec_dp>;
-+ };
-+ };
-+ };
-+ };
-+ };
-+};
-+
-+&i2s1 {
-+ #sound-dai-cells = <0>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2s_8ch_mclk_gpio>, <&i2s1_2ch_bus>;
-+ rockchip,capture-channels = <8>;
-+ rockchip,playback-channels = <8>;
-+ status = "okay";
-+};
-+
-+&io_domains {
-+ audio-supply = <&vcc_3v0>;
-+ gpio1830-supply = <&vcc_3v0>;
-+ sdmmc-supply = <&vcc_sdio>;
-+ status = "okay";
-+};
-+
-+&pcie_phy {
-+ status = "okay";
-+};
-+
-+&pcie0 {
-+ bus-scan-delay-ms = <1000>;
-+ ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
-+ max-link-speed = <2>;
-+ num-lanes = <4>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pcie_clkreqn_cpm>;
-+ vpcie0v9-supply = <&vcca0v9_s3>;
-+ vpcie1v8-supply = <&vcca1v8_s3>;
-+ vpcie3v3-supply = <&vcc3v3_ssd>;
-+ status = "okay";
-+};
-+
-+&pinctrl {
-+ buttons {
-+ pwrbtn_gpio: pwrbtn-gpio {
-+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
-+ };
-+
-+ lidbtn_gpio: lidbtn-gpio {
-+ rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
-+ };
-+ };
-+
-+ dc-charger {
-+ dc_det_gpio: dc-det-gpio {
-+ rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
-+ };
-+ };
-+
-+ es8316 {
-+ hp_det_gpio: hp-det-gpio {
-+ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
-+ };
-+ };
-+
-+ fusb302x {
-+ fusb0_int_gpio: fusb0-int-gpio {
-+ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
-+ };
-+ };
-+
-+ i2s1 {
-+ i2s_8ch_mclk_gpio: i2s-8ch-mclk-gpio {
-+ rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>;
-+ };
-+ };
-+
-+ lcd-panel {
-+ lcdvcc_en_gpio: lcdvcc-en-gpio {
-+ rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+
-+ panel_en_gpio: panel-en-gpio {
-+ rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+
-+ lcd_panel_reset_gpio: lcd-panel-reset-gpio {
-+ rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
-+ };
-+ };
-+
-+ leds {
-+ pwrled_gpio: pwrled_gpio {
-+ rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+
-+ slpled_gpio: slpled_gpio {
-+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+ };
-+
-+ pmic {
-+ pmic_int_l_gpio: pmic-int-l-gpio {
-+ rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
-+ };
-+
-+ vsel1_gpio: vsel1-gpio {
-+ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
-+ };
-+
-+ vsel2_gpio: vsel2-gpio {
-+ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
-+ };
-+ };
-+
-+ sdcard {
-+ sdmmc0_pwr_h_gpio: sdmmc0-pwr-h-gpio {
-+ rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+
-+ };
-+
-+ sdio-pwrseq {
-+ wifi_enable_h_gpio: wifi-enable-h-gpio {
-+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+ };
-+
-+ usb-typec {
-+ vcc5v0_typec0_en_gpio: vcc5v0-typec0-en-gpio {
-+ rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
-+ };
-+ };
-+
-+ usb2 {
-+ pwr_5v_gpio: pwr-5v-gpio {
-+ rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+
-+ vcc5v0_host_en_gpio: vcc5v0-host-en-gpio {
-+ rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+ };
-+
-+ wireless-bluetooth {
-+ bt_wake_gpio: bt-wake-gpio {
-+ rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+
-+ bt_host_wake_gpio: bt-host-wake-gpio {
-+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+
-+ bt_reset_gpio: bt-reset-gpio {
-+ rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+ };
-+};
-+
-+&pmu_io_domains {
-+ pmu1830-supply = <&vcc_3v0>;
-+ status = "okay";
-+};
-+
-+&pwm0 {
-+ status = "okay";
-+};
-+
-+&pwm2 {
-+ status = "okay";
-+};
-+
-+&saradc {
-+ vref-supply = <&vcca1v8_s3>;
-+ status = "okay";
-+};
-+
-+&sdmmc {
-+ bus-width = <4>;
-+ cap-mmc-highspeed;
-+ cap-sd-highspeed;
-+ cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
-+ disable-wp;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
-+ sd-uhs-sdr104;
-+ vmmc-supply = <&vcc3v0_sd>;
-+ vqmmc-supply = <&vcc_sdio>;
-+ status = "okay";
-+};
-+
-+&sdio0 {
-+ bus-width = <4>;
-+ cap-sd-highspeed;
-+ cap-sdio-irq;
-+ keep-power-in-suspend;
-+ mmc-pwrseq = <&sdio_pwrseq>;
-+ non-removable;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
-+ sd-uhs-sdr104;
-+ status = "okay";
-+};
-+
-+&sdhci {
-+ bus-width = <8>;
-+ mmc-hs200-1_8v;
-+ non-removable;
-+ status = "okay";
-+};
-+
-+&spi1 {
-+ max-freq = <10000000>;
-+ status = "okay";
-+
-+ spiflash: flash@0 {
-+ compatible = "jedec,spi-nor";
-+ reg = <0>;
-+ m25p,fast-read;
-+ spi-max-frequency = <10000000>;
-+ };
-+};
-+
-+&tcphy0 {
-+ status = "okay";
-+};
-+
-+&tcphy0_dp {
-+ port {
-+ tcphy0_typec_dp: endpoint {
-+ remote-endpoint = <&usbc_dp>;
-+ };
-+ };
-+};
-+
-+&tcphy0_usb3 {
-+ port {
-+ tcphy0_typec_ss: endpoint {
-+ remote-endpoint = <&usbc_ss>;
-+ };
-+ };
-+};
-+
-+&tcphy1 {
-+ status = "okay";
-+};
-+
-+&tsadc {
-+ /* tshut mode 0:CRU 1:GPIO */
-+ rockchip,hw-tshut-mode = <1>;
-+ /* tshut polarity 0:LOW 1:HIGH */
-+ rockchip,hw-tshut-polarity = <1>;
-+ status = "okay";
-+};
-+
-+&u2phy0 {
-+ status = "okay";
-+
-+ u2phy0_otg: otg-port {
-+ status = "okay";
-+ };
-+
-+ u2phy0_host: host-port {
-+ phy-supply = <&vcc5v0_otg>;
-+ status = "okay";
-+ };
-+
-+ port {
-+ u2phy0_typec_hs: endpoint {
-+ remote-endpoint = <&usbc_hs>;
-+ };
-+ };
-+};
-+
-+&u2phy1 {
-+ status = "okay";
-+
-+ u2phy1_otg: otg-port {
-+ status = "okay";
-+ };
-+
-+ u2phy1_host: host-port {
-+ phy-supply = <&vcc5v0_otg>;
-+ status = "okay";
-+ };
-+};
-+
-+&uart0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
-+ uart-has-rtscts;
-+ status = "okay";
-+
-+ bluetooth {
-+ compatible = "brcm,bcm4345c5";
-+ clocks = <&rk808 1>;
-+ clock-names = "lpo";
-+ device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
-+ host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
-+ max-speed = <1500000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&bt_host_wake_gpio &bt_wake_gpio &bt_reset_gpio>;
-+ shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
-+ vbat-supply = <&wifi_bat>;
-+ vddio-supply = <&vcc_wl>;
-+ };
-+};
-+
-+&uart2 {
-+ status = "okay";
-+};
-+
-+&usb_host0_ehci {
-+ status = "okay";
-+};
-+
-+&usb_host0_ohci {
-+ status = "okay";
-+};
-+
-+&usb_host1_ehci {
-+ status = "okay";
-+};
-+
-+&usb_host1_ohci {
-+ status = "okay";
-+};
-+
-+&usbdrd3_0 {
-+ status = "okay";
-+};
-+
-+&usbdrd_dwc3_0 {
-+ dr_mode = "host";
-+ status = "okay";
-+};
-+
-+&usbdrd3_1 {
-+ status = "okay";
-+};
-+
-+&usbdrd_dwc3_1 {
-+ dr_mode = "host";
-+ status = "okay";
-+};
-+
-+&vopb {
-+ status = "okay";
-+};
-+
-+&vopb_mmu {
-+ status = "okay";
-+};
-+
-+&vopl {
-+ status = "okay";
-+};
-+
-+&vopl_mmu {
-+ status = "okay";
-+};
---
-2.20.1
-
diff --git a/gnu/packages/patches/u-boot-add-boe-nv140fhmn49-display.patch
b/gnu/packages/patches/u-boot-add-boe-nv140fhmn49-display.patch
deleted file mode 100644
index c359522..0000000
--- a/gnu/packages/patches/u-boot-add-boe-nv140fhmn49-display.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 00978950fed39b6104b6b4f141450a66cc3400fa Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Mon, 20 Apr 2020 20:27:32 +0100
-Origin:
https://patchwork.ozlabs.org/project/uboot/patch/20200420192736.962307-2-pbrobinson@gmail.com/
-Subject: [PATCH 1/5] video: simple_panel: add boe,nv140fhmn49 display
-
-add "boe,nv140fhmn49" display to compatible node.
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
-Cc: Anatolij Gustschin <agust@denx.de>
----
- drivers/video/simple_panel.c | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/drivers/video/simple_panel.c b/drivers/video/simple_panel.c
-index c3c0e84732..5722811117 100644
---- a/drivers/video/simple_panel.c
-+++ b/drivers/video/simple_panel.c
-@@ -105,6 +105,7 @@ static const struct udevice_id simple_panel_ids[] = {
- { .compatible = "auo,b133xtn01" },
- { .compatible = "auo,b116xw03" },
- { .compatible = "auo,b133htn01" },
-+ { .compatible = "boe,nv140fhmn49" },
- { .compatible = "lg,lb070wv8" },
- { }
- };
---
-2.20.1
-
diff --git a/gnu/packages/patches/u-boot-gpio-keys-binding-cons.patch
b/gnu/packages/patches/u-boot-gpio-keys-binding-cons.patch
deleted file mode 100644
index aec33a7..0000000
--- a/gnu/packages/patches/u-boot-gpio-keys-binding-cons.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 451bd72bf966df7518682cb748a804634ea19424 Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Mon, 20 Apr 2020 20:27:33 +0100
-Origin:
https://patchwork.ozlabs.org/project/uboot/patch/20200420192736.962307-3-pbrobinson@gmail.com/
-Subject: [PATCH 2/5] dt-bindings: input: adopt Linux gpio-keys binding
- constants
-
-Sync the gpio-keys input bindings from linux 5.7-rc1.
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
----
- include/dt-bindings/input/gpio-keys.h | 13 +++++++++++++
- 1 file changed, 13 insertions(+)
- create mode 100644 include/dt-bindings/input/gpio-keys.h
-
-diff --git a/include/dt-bindings/input/gpio-keys.h
b/include/dt-bindings/input/gpio-keys.h
-new file mode 100644
-index 0000000000..8962df79e7
---- /dev/null
-+++ b/include/dt-bindings/input/gpio-keys.h
-@@ -0,0 +1,13 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/*
-+ * This header provides constants for gpio keys bindings.
-+ */
-+
-+#ifndef _DT_BINDINGS_GPIO_KEYS_H
-+#define _DT_BINDINGS_GPIO_KEYS_H
-+
-+#define EV_ACT_ANY 0x00 /* asserted or deasserted */
-+#define EV_ACT_ASSERTED 0x01 /* asserted */
-+#define EV_ACT_DEASSERTED 0x02 /* deasserted */
-+
-+#endif /* _DT_BINDINGS_GPIO_KEYS_H */
---
-2.20.1
-
diff --git a/gnu/packages/patches/u-boot-leds-common-binding-con.patch
b/gnu/packages/patches/u-boot-leds-common-binding-con.patch
deleted file mode 100644
index 8374081..0000000
--- a/gnu/packages/patches/u-boot-leds-common-binding-con.patch
+++ /dev/null
@@ -1,115 +0,0 @@
-From 282b6ca04abbe1302d04caa05be5fc5afb127141 Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Mon, 20 Apr 2020 20:27:34 +0100
-Origin:
https://patchwork.ozlabs.org/project/uboot/patch/20200420192736.962307-4-pbrobinson@gmail.com/
-Subject: [PATCH 3/5] dt-bindings: leds: adopt Linux leds common binding
- constants
-
-Sync the common leds bindings from linux 5.7-rc1.
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
----
- include/dt-bindings/leds/common.h | 91 +++++++++++++++++++++++++++++++
- 1 file changed, 91 insertions(+)
- create mode 100644 include/dt-bindings/leds/common.h
-
-diff --git a/include/dt-bindings/leds/common.h
b/include/dt-bindings/leds/common.h
-new file mode 100644
-index 0000000000..0ce7dfc00d
---- /dev/null
-+++ b/include/dt-bindings/leds/common.h
-@@ -0,0 +1,91 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/*
-+ * This header provides macros for the common LEDs device tree bindings.
-+ *
-+ * Copyright (C) 2015, Samsung Electronics Co., Ltd.
-+ * Author: Jacek Anaszewski <j.anaszewski@samsung.com>
-+ *
-+ * Copyright (C) 2019 Jacek Anaszewski <jacek.anaszewski@gmail.com>
-+ * Copyright (C) 2020 Pavel Machek <pavel@ucw.cz>
-+ */
-+
-+#ifndef __DT_BINDINGS_LEDS_H
-+#define __DT_BINDINGS_LEDS_H
-+
-+/* External trigger type */
-+#define LEDS_TRIG_TYPE_EDGE 0
-+#define LEDS_TRIG_TYPE_LEVEL 1
-+
-+/* Boost modes */
-+#define LEDS_BOOST_OFF 0
-+#define LEDS_BOOST_ADAPTIVE 1
-+#define LEDS_BOOST_FIXED 2
-+
-+/* Standard LED colors */
-+#define LED_COLOR_ID_WHITE 0
-+#define LED_COLOR_ID_RED 1
-+#define LED_COLOR_ID_GREEN 2
-+#define LED_COLOR_ID_BLUE 3
-+#define LED_COLOR_ID_AMBER 4
-+#define LED_COLOR_ID_VIOLET 5
-+#define LED_COLOR_ID_YELLOW 6
-+#define LED_COLOR_ID_IR 7
-+#define LED_COLOR_ID_MAX 8
-+
-+/* Standard LED functions */
-+/* Keyboard LEDs, usually it would be input4::capslock etc. */
-+/* Obsolete equivalent: "shift-key-light" */
-+#define LED_FUNCTION_CAPSLOCK "capslock"
-+#define LED_FUNCTION_SCROLLLOCK "scrolllock"
-+#define LED_FUNCTION_NUMLOCK "numlock"
-+/* Obsolete equivalents: "tpacpi::thinklight" (IBM/Lenovo Thinkpads),
-+ "lp5523:kb{1,2,3,4,5,6}" (Nokia N900) */
-+#define LED_FUNCTION_KBD_BACKLIGHT "kbd_backlight"
-+
-+/* System LEDs, usually found on system body.
-+ platform::mute (etc) is sometimes seen, :mute would be better */
-+#define LED_FUNCTION_POWER "power"
-+#define LED_FUNCTION_DISK "disk"
-+
-+/* Obsolete: "platform:*:charging" (allwinner sun50i) */
-+#define LED_FUNCTION_CHARGING "charging"
-+/* Used RGB notification LEDs common on phones.
-+ Obsolete equivalents: "status-led:{red,green,blue}" (Motorola Droid 4),
-+ "lp5523:{r,g,b}" (Nokia N900) */
-+#define LED_FUNCTION_STATUS "status"
-+
-+#define LED_FUNCTION_MICMUTE "micmute"
-+#define LED_FUNCTION_MUTE "mute"
-+
-+/* Miscelleaus functions. Use functions above if you can. */
-+#define LED_FUNCTION_ACTIVITY "activity"
-+#define LED_FUNCTION_ALARM "alarm"
-+#define LED_FUNCTION_BACKLIGHT "backlight"
-+#define LED_FUNCTION_BLUETOOTH "bluetooth"
-+#define LED_FUNCTION_BOOT "boot"
-+#define LED_FUNCTION_CPU "cpu"
-+#define LED_FUNCTION_DEBUG "debug"
-+#define LED_FUNCTION_DISK_ACTIVITY "disk-activity"
-+#define LED_FUNCTION_DISK_ERR "disk-err"
-+#define LED_FUNCTION_DISK_READ "disk-read"
-+#define LED_FUNCTION_DISK_WRITE "disk-write"
-+#define LED_FUNCTION_FAULT "fault"
-+#define LED_FUNCTION_FLASH "flash"
-+#define LED_FUNCTION_HEARTBEAT "heartbeat"
-+#define LED_FUNCTION_INDICATOR "indicator"
-+#define LED_FUNCTION_LAN "lan"
-+#define LED_FUNCTION_MAIL "mail"
-+#define LED_FUNCTION_MTD "mtd"
-+#define LED_FUNCTION_PANIC "panic"
-+#define LED_FUNCTION_PROGRAMMING "programming"
-+#define LED_FUNCTION_RX "rx"
-+#define LED_FUNCTION_SD "sd"
-+#define LED_FUNCTION_STANDBY "standby"
-+#define LED_FUNCTION_TORCH "torch"
-+#define LED_FUNCTION_TX "tx"
-+#define LED_FUNCTION_USB "usb"
-+#define LED_FUNCTION_WAN "wan"
-+#define LED_FUNCTION_WLAN "wlan"
-+#define LED_FUNCTION_WPS "wps"
-+
-+#endif /* __DT_BINDINGS_LEDS_H */
---
-2.20.1
-
diff --git a/gnu/packages/patches/u-boot-riscv64-fix-extlinux.patch
b/gnu/packages/patches/u-boot-riscv64-fix-extlinux.patch
index 3feeb1d..29dec4f 100644
--- a/gnu/packages/patches/u-boot-riscv64-fix-extlinux.patch
+++ b/gnu/packages/patches/u-boot-riscv64-fix-extlinux.patch
@@ -16,7 +16,6 @@ Signed-off-by: David Abdurachmanov
<david.abdurachmanov@sifive.com>
---
configs/qemu-riscv64_smode_defconfig | 2 ++
configs/sifive_fu540_defconfig | 2 ++
- include/configs/sifive-fu540.h | 4 ----
3 files changed, 4 insertions(+), 4 deletions(-)
Index: u-boot/configs/qemu-riscv64_smode_defconfig
@@ -39,16 +38,3 @@ Index: u-boot/configs/sifive_fu540_defconfig
CONFIG_DM_MTD=y
+CONFIG_USE_PREBOOT=y
+CONFIG_PREBOOT="setenv fdt_addr ${fdtcontroladdr}; fdt addr
${fdtcontroladdr};"
-Index: u-boot/include/configs/sifive-fu540.h
-===================================================================
---- u-boot.orig/include/configs/sifive-fu540.h
-+++ u-boot/include/configs/sifive-fu540.h
-@@ -40,8 +40,4 @@
- "ramdisk_addr_r=0x88300000\0" \
- BOOTENV
-
--#define CONFIG_PREBOOT \
-- "setenv fdt_addr ${fdtcontroladdr};" \
-- "fdt addr ${fdtcontroladdr};"
--
- #endif /* __CONFIG_H */
diff --git a/gnu/packages/patches/u-boot-support-Pinebook-Pro-laptop.patch
b/gnu/packages/patches/u-boot-support-Pinebook-Pro-laptop.patch
deleted file mode 100644
index c6f91fa..0000000
--- a/gnu/packages/patches/u-boot-support-Pinebook-Pro-laptop.patch
+++ /dev/null
@@ -1,367 +0,0 @@
-From 60381e4add64dddbd07e78248b2b0f819eb2776e Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Mon, 20 Apr 2020 20:27:36 +0100
-Origin:
https://patchwork.ozlabs.org/project/uboot/patch/20200420192736.962307-6-pbrobinson@gmail.com/
-Subject: [PATCH 5/5] Add initial support for the Pinebook Pro laptop from
- Pine64.
-
-Specification:
-- Rockchip RK3399
-- 4GB Dual-Channel LPDDR4
-- eMMC socket
-- mSD card slot
-- 128Mbit (16Mb) SPI Flash
-- AP6256 for 11AC WiFi + BT5
-- 14 inch 1920*1080 eDP MiPi display
-- Camera
-- USB 3.0, 2.0 ports
-- Type-C port with alt-mode display (DP 1.2) and 15W charge
-- DC 5V/3A
-- optional PCIe slot for NVMe SSD drive
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
----
- arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi | 43 ++++++++++
- arch/arm/mach-rockchip/rk3399/Kconfig | 8 ++
- board/pine64/pinebook-pro-rk3399/Kconfig | 15 ++++
- board/pine64/pinebook-pro-rk3399/MAINTAINERS | 8 ++
- board/pine64/pinebook-pro-rk3399/Makefile | 1 +
- .../pinebook-pro-rk3399/pinebook-pro-rk3399.c | 76 +++++++++++++++++
- configs/pinebook-pro-rk3399_defconfig | 84 +++++++++++++++++++
- include/configs/pinebook-pro-rk3399.h | 29 +++++++
- 8 files changed, 264 insertions(+)
- create mode 100644 arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi
- create mode 100644 board/pine64/pinebook-pro-rk3399/Kconfig
- create mode 100644 board/pine64/pinebook-pro-rk3399/MAINTAINERS
- create mode 100644 board/pine64/pinebook-pro-rk3399/Makefile
- create mode 100644 board/pine64/pinebook-pro-rk3399/pinebook-pro-rk3399.c
- create mode 100644 configs/pinebook-pro-rk3399_defconfig
- create mode 100644 include/configs/pinebook-pro-rk3399.h
-
-diff --git a/arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi
b/arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi
-new file mode 100644
-index 0000000000..1a2e24d3ef
---- /dev/null
-+++ b/arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi
-@@ -0,0 +1,43 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+/*
-+ * Copyright (C) 2019 Peter Robinson <pbrobinson at gmail.com>
-+ */
-+
-+#include "rk3399-u-boot.dtsi"
-+#include "rk3399-sdram-lpddr4-100.dtsi"
-+
-+/ {
-+ aliases {
-+ spi0 = &spi1;
-+ };
-+
-+ chosen {
-+ u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc;
-+ };
-+};
-+
-+&i2c0 {
-+ u-boot,dm-pre-reloc;
-+};
-+
-+&rk808 {
-+ u-boot,dm-pre-reloc;
-+};
-+
-+&sdhci {
-+ max-frequency = <25000000>;
-+ u-boot,dm-pre-reloc;
-+};
-+
-+&sdmmc {
-+ max-frequency = <20000000>;
-+ u-boot,dm-pre-reloc;
-+};
-+
-+&spiflash {
-+ u-boot,dm-pre-reloc;
-+};
-+
-+&vdd_log {
-+ regulator-init-microvolt = <950000>;
-+};
-diff --git a/arch/arm/mach-rockchip/rk3399/Kconfig
b/arch/arm/mach-rockchip/rk3399/Kconfig
-index 927bb62a9f..254b9c5b4d 100644
---- a/arch/arm/mach-rockchip/rk3399/Kconfig
-+++ b/arch/arm/mach-rockchip/rk3399/Kconfig
-@@ -19,6 +19,13 @@ config TARGET_EVB_RK3399
- with full function and physical connectors support like Type-C ports,
- USB.0 host ports, LVDS, JTAG, MAC, SD card, HDMI, USB-to-serial...
-
-+config TARGET_PINEBOOK_PRO_RK3399
-+ bool "Pinebook Pro"
-+ help
-+ Pinebook Pro is a laptop based on the Rockchip rk3399 SoC
-+ with 4Gb RAM, onboard eMMC, USB-C, a USB3 and USB2 port,
-+ 1920*1080 screen and all the usual laptop features.
-+
- config TARGET_PUMA_RK3399
- bool "Theobroma Systems RK3399-Q7 (Puma)"
- help
-@@ -144,6 +151,7 @@ endif # BOOTCOUNT_LIMIT
-
- source "board/firefly/roc-pc-rk3399/Kconfig"
- source "board/google/gru/Kconfig"
-+source "board/pine64/pinebook-pro-rk3399/Kconfig"
- source "board/pine64/rockpro64_rk3399/Kconfig"
- source "board/rockchip/evb_rk3399/Kconfig"
- source "board/theobroma-systems/puma_rk3399/Kconfig"
-diff --git a/board/pine64/pinebook-pro-rk3399/Kconfig
b/board/pine64/pinebook-pro-rk3399/Kconfig
-new file mode 100644
-index 0000000000..3bb7ca448e
---- /dev/null
-+++ b/board/pine64/pinebook-pro-rk3399/Kconfig
-@@ -0,0 +1,15 @@
-+if TARGET_PINEBOOK_PRO_RK3399
-+
-+config SYS_BOARD
-+ default "pinebook-pro-rk3399"
-+
-+config SYS_VENDOR
-+ default "pine64"
-+
-+config SYS_CONFIG_NAME
-+ default "pinebook-pro-rk3399"
-+
-+config BOARD_SPECIFIC_OPTIONS
-+ def_bool y
-+
-+endif
-diff --git a/board/pine64/pinebook-pro-rk3399/MAINTAINERS
b/board/pine64/pinebook-pro-rk3399/MAINTAINERS
-new file mode 100644
-index 0000000000..7153eaf2e0
---- /dev/null
-+++ b/board/pine64/pinebook-pro-rk3399/MAINTAINERS
-@@ -0,0 +1,8 @@
-+PINEBOOK_PRO
-+M: Peter Robinson <pbrobinson at gmail.com>
-+S: Maintained
-+F: board/pine64/rk3399-pinebook-pro/
-+F: include/configs/rk3399-pinebook-pro.h
-+F: arch/arm/dts/rk3399-pinebook-pro.dts
-+F: arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi
-+F: configs/pinebook-pro-rk3399_defconfig
-diff --git a/board/pine64/pinebook-pro-rk3399/Makefile
b/board/pine64/pinebook-pro-rk3399/Makefile
-new file mode 100644
-index 0000000000..2f692a12a6
---- /dev/null
-+++ b/board/pine64/pinebook-pro-rk3399/Makefile
-@@ -0,0 +1 @@
-+obj-y += pinebook-pro-rk3399.o
-diff --git a/board/pine64/pinebook-pro-rk3399/pinebook-pro-rk3399.c
b/board/pine64/pinebook-pro-rk3399/pinebook-pro-rk3399.c
-new file mode 100644
-index 0000000000..01421cbac2
---- /dev/null
-+++ b/board/pine64/pinebook-pro-rk3399/pinebook-pro-rk3399.c
-@@ -0,0 +1,76 @@
-+/*
-+ * (C) Copyright 2016 Rockchip Electronics Co., Ltd
-+ * (C) Copyright 2020 Peter Robinson <pbrobinson at gmail.com>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#include <common.h>
-+#include <dm.h>
-+#include <syscon.h>
-+#include <asm/io.h>
-+#include <asm/arch-rockchip/clock.h>
-+#include <asm/arch-rockchip/grf_rk3399.h>
-+#include <asm/arch-rockchip/hardware.h>
-+#include <asm/arch-rockchip/misc.h>
-+#include <power/regulator.h>
-+
-+#define GRF_IO_VSEL_BT565_SHIFT 0
-+#define PMUGRF_CON0_VSEL_SHIFT 8
-+
-+#ifndef CONFIG_SPL_BUILD
-+int board_early_init_f(void)
-+{
-+ struct udevice *regulator;
-+ int ret;
-+
-+ ret = regulator_get_by_platname("vcc5v0_usb", ®ulator);
-+ if (ret) {
-+ debug("%s vcc5v0_usb init fail! ret %d\n", __func__, ret);
-+ goto out;
-+ }
-+
-+ ret = regulator_set_enable(regulator, true);
-+ if (ret)
-+ debug("%s vcc5v0-host-en-gpio set fail! ret %d\n", __func__,
ret);
-+
-+out:
-+ return 0;
-+}
-+#endif
-+
-+#ifdef CONFIG_MISC_INIT_R
-+static void setup_iodomain(void)
-+{
-+ struct rk3399_grf_regs *grf =
-+ syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
-+ struct rk3399_pmugrf_regs *pmugrf =
-+ syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF);
-+
-+ /* BT565 is in 1.8v domain */
-+ rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_BT565_SHIFT);
-+
-+ /* Set GPIO1 1.8v/3.0v source select to PMU1830_VOL */
-+ rk_setreg(&pmugrf->soc_con0, 1 << PMUGRF_CON0_VSEL_SHIFT);
-+}
-+
-+int misc_init_r(void)
-+{
-+ const u32 cpuid_offset = 0x7;
-+ const u32 cpuid_length = 0x10;
-+ u8 cpuid[cpuid_length];
-+ int ret;
-+
-+ setup_iodomain();
-+
-+ ret = rockchip_cpuid_from_efuse(cpuid_offset, cpuid_length, cpuid);
-+ if (ret)
-+ return ret;
-+
-+ ret = rockchip_cpuid_set(cpuid, cpuid_length);
-+ if (ret)
-+ return ret;
-+
-+ return ret;
-+}
-+#endif
-diff --git a/configs/pinebook-pro-rk3399_defconfig
b/configs/pinebook-pro-rk3399_defconfig
-new file mode 100644
-index 0000000000..0e9f0ec250
---- /dev/null
-+++ b/configs/pinebook-pro-rk3399_defconfig
-@@ -0,0 +1,84 @@
-+CONFIG_ARM=y
-+CONFIG_ARCH_ROCKCHIP=y
-+CONFIG_SYS_TEXT_BASE=0x00200000
-+CONFIG_ENV_OFFSET=0x3F8000
-+CONFIG_ROCKCHIP_RK3399=y
-+CONFIG_RAM_RK3399_LPDDR4=y
-+CONFIG_NR_DRAM_BANKS=1
-+CONFIG_TARGET_PINEBOOK_PRO_RK3399=y
-+CONFIG_BAUDRATE=1500000
-+CONFIG_DEBUG_UART=y
-+CONFIG_DEBUG_UART_SHIFT=2
-+CONFIG_DEBUG_UART_BASE=0xFF1A0000
-+CONFIG_DEBUG_UART_CLOCK=24000000
-+CONFIG_SPL_SPI_SUPPORT=y
-+CONFIG_SPL_SPI_FLASH_SUPPORT=y
-+CONFIG_SPL_MTD_SUPPORT=y
-+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-pinebook-pro.dtb"
-+CONFIG_MISC_INIT_R=y
-+CONFIG_DISPLAY_BOARDINFO_LATE=y
-+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-+CONFIG_SPL_STACK_R=y
-+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
-+CONFIG_TPL=y
-+CONFIG_SPL_OF_CONTROL=y
-+CONFIG_DEFAULT_DEVICE_TREE="rk3399-pinebook-pro"
-+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names
interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
-+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-+CONFIG_CMD_BOOTZ=y
-+CONFIG_CMD_GPIO=y
-+CONFIG_CMD_GPT=y
-+CONFIG_CMD_I2C=y
-+CONFIG_CMD_MMC=y
-+CONFIG_CMD_MTDPARTS=y
-+CONFIG_CMD_PMIC=y
-+CONFIG_CMD_REGULATOR=y
-+# CONFIG_CMD_SETEXPR is not set
-+CONFIG_CMD_SF=y
-+CONFIG_CMD_TIME=y
-+CONFIG_CMD_USB=y
-+CONFIG_ROCKCHIP_GPIO=y
-+CONFIG_SYS_I2C_ROCKCHIP=y
-+CONFIG_BOOTDELAY=3
-+CONFIG_LED=y
-+CONFIG_LED_GPIO=y
-+CONFIG_MISC=y
-+CONFIG_ROCKCHIP_EFUSE=y
-+CONFIG_MMC_DW=y
-+CONFIG_MMC_DW_ROCKCHIP=y
-+CONFIG_MMC_SDHCI=y
-+CONFIG_MMC_SDHCI_SDMA=y
-+CONFIG_MMC_SDHCI_ROCKCHIP=y
-+CONFIG_ROCKCHIP_SPI=y
-+CONFIG_SF_DEFAULT_SPEED=20000000
-+CONFIG_SPI_FLASH=y
-+CONFIG_SPI_FLASH_GIGADEVICE=y
-+CONFIG_SPI_FLASH_WINBOND=y
-+CONFIG_DM_ETH=y
-+CONFIG_PMIC_RK8XX=y
-+CONFIG_DM_PMIC_FAN53555=y
-+CONFIG_REGULATOR_PWM=y
-+CONFIG_REGULATOR_RK8XX=y
-+CONFIG_PWM_ROCKCHIP=y
-+CONFIG_SYSRESET=y
-+CONFIG_USB=y
-+CONFIG_USB_XHCI_HCD=y
-+CONFIG_USB_XHCI_DWC3=y
-+# CONFIG_USB_XHCI_ROCKCHIP is not set
-+CONFIG_USB_EHCI_HCD=y
-+CONFIG_USB_EHCI_GENERIC=y
-+CONFIG_USB_DWC3=y
-+CONFIG_ROCKCHIP_USB2_PHY=y
-+CONFIG_USB_HOST_ETHER=y
-+CONFIG_USB_ETHER_ASIX=y
-+CONFIG_USB_ETHER_RTL8152=y
-+CONFIG_USB_KEYBOARD=y
-+CONFIG_USE_TINY_PRINTF=y
-+CONFIG_SPL_TINY_MEMSET=y
-+CONFIG_ERRNO_STR=y
-+CONFIG_DM_VIDEO=y
-+CONFIG_VIDEO_BPP16=y
-+CONFIG_VIDEO_BPP32=y
-+CONFIG_DISPLAY=y
-+CONFIG_VIDEO_ROCKCHIP=y
-+CONFIG_DISPLAY_ROCKCHIP_EDP=y
-diff --git a/include/configs/pinebook-pro-rk3399.h
b/include/configs/pinebook-pro-rk3399.h
-new file mode 100644
-index 0000000000..423d742a79
---- /dev/null
-+++ b/include/configs/pinebook-pro-rk3399.h
-@@ -0,0 +1,29 @@
-+/*
-+ * Copyright (C) 2016 Rockchip Electronics Co., Ltd
-+ * Copyright (C) 2020 Peter Robinson <pbrobinson at gmail.com>
-+ *
-+ * SPDX-License-Identifier: GPL-2.0+
-+ */
-+
-+#ifndef __PINEBOOK_PRO_RK3399_H
-+#define __PINEBOOK_PRO_RK3399_H
-+
-+#define ROCKCHIP_DEVICE_SETTINGS \
-+ "stdin=serial,usbkbd\0" \
-+ "stdout=serial,vidconsole\0" \
-+ "stderr=serial,vidconsole\0"
-+
-+#include <configs/rk3399_common.h>
-+
-+#if defined(CONFIG_ENV_IS_IN_MMC)
-+#define CONFIG_SYS_MMC_ENV_DEV 0
-+#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
-+#define CONFIG_ENV_SECT_SIZE (8 * 1024)
-+#endif
-+
-+#undef CONFIG_SYS_SPI_U_BOOT_OFFS
-+#define CONFIG_SYS_SPI_U_BOOT_OFFS 1024 * 512
-+
-+#define SDRAM_BANK_SIZE (2UL << 30)
-+
-+#endif
---
-2.20.1
-
diff --git a/gnu/packages/patches/u-boot-video-rockchip-fix-build.patch
b/gnu/packages/patches/u-boot-video-rockchip-fix-build.patch
deleted file mode 100644
index ca2be8d..0000000
--- a/gnu/packages/patches/u-boot-video-rockchip-fix-build.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From ecc69ec25df07e1ce63d7add6b235b37673ed608 Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Mon, 20 Apr 2020 19:18:25 +0100
-Origin:
https://patchwork.ozlabs.org/project/uboot/patch/20200420181825.935797-1-pbrobinson@gmail.com/
-Subject: [PATCH 6/6] drivers: video: rockchip: fix building eDP and LVDS
- drivers
-
-The rk_edp.c and rk_lvds.c files reference rk_setreg which is declared in
-hardware.h so include it so the drivers build. Adjust rk_lvds.c so
-includes are in alphabetical order while updating.
-
-Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
-Reviewed-by: Anatolij Gustschin <agust@denx.de>
----
- drivers/video/rockchip/rk_edp.c | 1 +
- drivers/video/rockchip/rk_lvds.c | 3 ++-
- 2 files changed, 3 insertions(+), 1 deletion(-)
-
-diff --git a/drivers/video/rockchip/rk_edp.c b/drivers/video/rockchip/rk_edp.c
-index 8703df0ec0..cf84b886e7 100644
---- a/drivers/video/rockchip/rk_edp.c
-+++ b/drivers/video/rockchip/rk_edp.c
-@@ -18,6 +18,7 @@
- #include <asm/arch-rockchip/clock.h>
- #include <asm/arch-rockchip/edp_rk3288.h>
- #include <asm/arch-rockchip/grf_rk3288.h>
-+#include <asm/arch-rockchip/hardware.h>
- #include <dt-bindings/clock/rk3288-cru.h>
-
- #define MAX_CR_LOOP 5
-diff --git a/drivers/video/rockchip/rk_lvds.c
b/drivers/video/rockchip/rk_lvds.c
-index cf5c0439b1..79e24baf53 100644
---- a/drivers/video/rockchip/rk_lvds.c
-+++ b/drivers/video/rockchip/rk_lvds.c
-@@ -13,8 +13,9 @@
- #include <asm/gpio.h>
- #include <asm/io.h>
- #include <asm/arch-rockchip/clock.h>
--#include <asm/arch-rockchip/lvds_rk3288.h>
- #include <asm/arch-rockchip/grf_rk3288.h>
-+#include <asm/arch-rockchip/hardware.h>
-+#include <asm/arch-rockchip/lvds_rk3288.h>
- #include <dt-bindings/clock/rk3288-cru.h>
- #include <dt-bindings/video/rk3288.h>
-
---
-2.20.1
-
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- branch master updated: gnu: u-boot: Update to 2020.07.,
guix-commits <=