[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: RPMS or RPM Spec file for cfengine?
From: |
mark |
Subject: |
Re: RPMS or RPM Spec file for cfengine? |
Date: |
Fri, 18 Apr 2003 20:37:04 +0200 (MEST) |
I would be happy to make rpms and debs if someone gave me a simple
way of doing it. Perhaps someone else could maintain it on the
Savannah site. I don't use these myself, being somewhat closer
to cfengine :).
I was once told that automake could build rpms etc, but I cannot
see it myself.
Mark
On 18 Apr, Villalovos, John L wrote:
> Yes I had found some myself that way BUT I still think that it would be
> useful if the Cfengine site had an "official" spec file or even an
> "unofficial" spec file.
>
> Would it be a lot of work to get a spec file added into the tarball? I
> realize that it means that someone would have to update it for new versions.
> It would also be nice if the Makefile had an RPM target but that isn't
> critical.
>
> Thanks,
> John
>
> John Villalovos
> Intel Corporation
> 15400 NW GREENBRIER PKWY # CO5-162
> BEAVERTON, OR 97006-5723
> (503) 677-5777 Fax: (503) 677-6670
>
> GPG 1.+/PGP 5.+/ DSS/Diffie Helman
> http://www.sodarock.com/JohnVillalovos-gpgkey.txt
> 1024D/1A25D86C 2F24 AD89 E5D5 C92B 7FE2 F878 7ED5 2D38 1A25 D86C
>
> My opinions are my own and NEVER the opinions of Intel Corporation. I am
> but a tiny, insignificant, infinitesimal (1/80000) cog in the giant machine
> of Intel :)
>
>> -----Original Message-----
>> From: Yves [mailto:Y99@gmx.de]
>> Sent: Friday, April 18, 2003 2:53 AM
>> To: Villalovos, John L; help-cfengine@gnu.org
>> Subject: Re: RPMS or RPM Spec file for cfengine?
>>
>>
>> maybe you should ask Google...
>>
>> I found a precompiled version for HP-UX 2.0.6
>> http://hpux.connect.org.uk/hppd/hpux/Sysadmin/cfengine-2.0.6/
>>
>> Yves
>>
>> On Thu, 17 Apr 2003 17:10:05 -0700, Villalovos, John L wrote:
>> >I was wondering if the http://www.cfengine.org/ site will ever have
>> >"official" or even "unofficial" RPMS of the cfengine package posted?
>> >Or
>> >even adding a SPEC file into the tarball.
>> >
>> >For myself I know that would be handy rather than reinventing the
>> >wheel
>> >since I am sure it has been done dozens if not hundreds of times by
>> >people already :)
>> >
>> >Thanks,
>> >John
>> >
>> >John Villalovos
>> >Intel Corporation
>> >15400 NW GREENBRIER PKWY # CO5-162
>> >BEAVERTON, OR 97006-5723
>> >(503) 677-5777 Fax: (503) 677-6670
>> >
>> >GPG 1.+/PGP 5.+/ DSS/Diffie Helman
>> >http://www.sodarock.com/JohnVillalovos-gpgkey.txt
>> >1024D/1A25D86C 2F24 AD89 E5D5 C92B 7FE2 F878 7ED5 2D38 1A25 D86C
>> >
>> >My opinions are my own and NEVER the opinions of Intel Corporation.
>> >I
>> >am but a tiny, insignificant, infinitesimal (1/80000) cog in the
>> >giant
>> >machine of Intel :)
>> >
>> >
>> >_______________________________________________
>> >Help-cfengine mailing list
>> >Help-cfengine@gnu.org
>> >http://mail.gnu.org/mailman/listinfo/help-cfengine
>>
>>
>> Gruß Yves
>>
>> Y99@gmx.de am 18.04.2003
>>
>
>
> _______________________________________________
> Help-cfengine mailing list
> Help-cfengine@gnu.org
> http://mail.gnu.org/mailman/listinfo/help-cfengine
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Work: +47 22453272 Email: Mark.Burgess@iu.hio.no
Fax : +47 22453205 WWW : http://www.iu.hio.no/~mark
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
RE: RPMS or RPM Spec file for cfengine?, Villalovos, John L, 2003/04/23