[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Unable to Install Rust 1.20.0 and Beyond
From: |
Brian Woodcox |
Subject: |
Re: Unable to Install Rust 1.20.0 and Beyond |
Date: |
Thu, 27 Dec 2018 09:23:42 -0700 |
Hi Mark,
I am marking this as *** RESOLVED ***.
Thanks for responding. It got me thinking in a different direction. I decided
to delve into this problem by running the guix build command.
Turn out the failure was occurring during cargo tests.
Specifically:
...
Running
build/x86_64-unknown-linux-gnu/stage2-tools/x86_64-unknown-gnu/release/deps/jobserver-dd0c6bf78d70e32b
running 3 tests
test jobserver_and_j ... ok
test jobserver_exists ... test jobserver_exists has been running for over 60
seconds
At this point the system hangs forever.
After much internet searching without much for results, I decided on a hunch to
increase the number of processors on my virtual machine from 1 to 2.
Tests now succeed!! rustc is now installed.
Brian.
> On Dec 20, 2018, at 11:24 AM, Mark H Weaver <address@hidden> wrote:
>
> Hi Brian,
>
> Brian Woodcox <address@hidden> writes:
>
>> I’m not able to install rust. Initially, I was having problems with
>> 1.19.0 because of memory issues. I fixed that by increasing the
>> memory and now 1.19.0 is installed.
>>
>> Now that I have lots of memory 16GB, and lots of hard disk space, I cannot
>> get 1.20.0 to install.
>>
>> I am installing it via:
>>
>> guix package -i rust
>>
>> It appears to be hung.
>>
>> guixbui+ 10572 0.0 0.2 127308 38260 ? Ssl 01:03 0:17 guile
>> --no-auto-compile -L
>> /gnu/store/27qw1zxljzylvm9b3jbi343gh6cngazq-module-import
>> /gnu/store/iw20znxa586mkrv0156paq7z1ya9vcbq-rust-1.20.0-guile-builder
>>
>> The cpu just sits at 0.0 for this process. Normally it should be close to
>> 100.
>
> FWIW, I've built rust-1.20.0 locally on my x86_64 GuixSD system several
> times without running into this issue. My system has only 4 GB of RAM
> and 8 GB of swap. On this system, I build everything locally.
>
> Hydra.gnu.org, our older build farm, has not run into this issue while
> building rust-1.20.0. Binary substitutes for rust-1.20.0 are currently
> available from hydra.gnu.org, so you should simply be able to download
> them.
>
I am able to install the binaries for these.
> Are you attempting to perform these builds within a VM? If so, are you
> using QEMU, VirtualBox, or something else?
Yes, with VirtualBox.
>
> I'm reminded of another unusual build failure that you encountered in
> 'guile' when you were first experimenting with Guix, when hydra.gnu.org
> was temporarily offline. The failure was one that I'd not seen reported
> before or since. As I recall, in that case you were attempting the
> build within VirtualBox.
>
> With this in mind, I wonder if the virtualization is imperfect in some
> way that the rust-1.20.0 test suite is sensitive to.
>
Yup, it’s imperfect with less than 2 processors in the virtual machine.
>> My var/log/guix/drvs/av/xcyxs39bdzs28kya500s4kpv0xvb9p-rust-1.20.0.drv.bz2
>> file has the following at the end:
>>
>> test
>> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
>> - Standard_library_traits_used_for_error_handling (line 1260)
>> ... ignored test
>> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
>> - Standard_library_traits_used_for_error_handling (line 1273) ... ok
>> test
>> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
>> - Standard_library_traits_used_for_error_handling (line 1306) ... ok
>> test
>> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
>> - Standard_library_traits_used_for_error_handling (line 1321) ... ok
>> test
>> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
>> - Standard_library_traits_used_for_error_handling (line 1338) ... ok
>> test
>> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
>> - Standard_library_traits_used_for_error_handling (line 1358) ... ok
>> test
>> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
>> - Standard_library_traits_used_for_error_handling (line 1409) ... ok
>> test
>> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
>> - Standard_library_traits_used_for_error_handling (line 1440) ... ok
>> test /tmp/guix-build-rust-1.20.0.drv-0/rustc-
>
> FYI, here's the most recent build of rust-1.20.0 on x86_64 on
> hydra.gnu.org:
>
> https://hydra.gnu.org/build/3218738
>
> From there, you can retrieve the build log. Here's an excerpt of the
> rust-1.20.0 build log from my own local system, including the point
> where your build gets stuck:
>
> --8<---------------cut here---------------start------------->8---
> test
> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
> - Standard_library_traits_used_for_error_handling (line 1321) ... ok
> test
> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
> - Standard_library_traits_used_for_error_handling (line 1338) ... ok
> test
> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
> - Standard_library_traits_used_for_error_handling (line 1358) ... ok
> test
> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
> - Standard_library_traits_used_for_error_handling (line 1409) ... ok
> test
> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
> - Standard_library_traits_used_for_error_handling (line 1440) ... ok
> test
> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
> - Standard_library_traits_used_for_error_handling (line 1466) ... ok
> test
> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
> - Standard_library_traits_used_for_error_handling (line 1500) ... ok
> test
> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
> - Standard_library_traits_used_for_error_handling (line 1514) ... ok
> test
> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
> - The_Basics (line 132) ... ok
> test
> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
> - The_Basics (line 148) ... ok
> test
> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
> - The_Basics (line 173) ... ok
> test
> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
> - The_Basics (line 197) ... ok
> test
> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
> - The_Basics (line 232) ... ok
> test
> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
> - The_Basics (line 266) ... ok
> test
> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
> - The_Basics (line 283) ... ok
> test
> /tmp/guix-build-rust-1.20.0.drv-0/rustc-1.20.0-src/src/doc/book/first-edition/src/error-handling.md
> - The_Basics (line 300) ... ok
> --8<---------------cut here---------------end--------------->8---
>
Thanks for pointing me to this.
> Mark