Installation issue on FrameWork laptop.

[Pietro Mele]

Dear Guix team,

I am trying to install GNU Guix System on a new laptop (FrameWork 16, AMD
Ryzen 7 7840HS).
I am using this file:
https://ftpmirror.gnu.org/gnu/guix/guix-system-install-1.4.0.x86_64-linux.iso

At the beginning, I get this warning:

Hardware support warning
Devices not supported by free software were found on your computer:
  - 1002 15bf

>From that code it should correspond to my integrated GPU not being
recognized. The reason could be that this APU was released after the
currently available Guix version.

I continue the installation process: Graphical install using a terminal
base interface.

This is the partitioning scheme I set up (manually copied):

FRMW 1TB Card (scsi) /dev/sda 1000GB msdos
- Free space 4193kB
- 1 normal 1000GB

WD_BLACK SN850X 2000GB (nvme) /dev/nvme0n1 2000GB gpt
- 8  1074MB   fat32     boot,esp   /boot/efi     boot
- 1  322GB    xfs                  /
- 2  103GB    linux-swap(v1)       swap
- 3  10.7GB   ext4                 /var
- 4  2147MB   ext4                 /temp
- 6  107GB    xfs                  /opt
- 5  859GB    ext4                 /home
- 7  21.5GB   ext4                 /crypt   Yes
     573GB    Free space

The configuration proceeds smoothly until the end.

The installation process starts, and these are the last logs produced
before the failure:

...
substitute: updating substitutes from 'https://ci.guix.gnu.org'... 0.0%
substitute: updating substitutes from 'https://bordeaux.guix.gnu.org'...
0.0%
substitute: updating substitutes from 'https://ci.guix.gnu.org'... 0.0%
substitute: updating substitutes from 'https://bordeaux.guix.gnu.org'...
0.0%
substitute: updating substitutes from 'https://ci.guix.gnu.org'... 0.0%
substitute: updating substitutes from 'https://bordeaux.guix.gnu.org'...
0.0%
\builder for `/gnu/store/bwy...ilb-slock-1.4.tar.gz.drv' failed to produce
output path `/gnu/store/la705...dqf-slock-1.4.tar.gz'
*build of /gnu/store/bwy...ilb-slock-1.4.tar.gz.drv failed*
View build log at '/var/log/guix/drvs/bw/...tar.gz.drv.gz'.
building /gnu/store/br3c...CUnit-2.1-3.tar.bz2.drv...
cannot build derivation `/gnu/store/256d...slock-1.4.tar.gz.drv': 1
dependencies couldn't be built
guix system: *error*: build of `/gnu/store/256d...slock-1.4.tar.gz.drv'
failed
Command ("guix" "system" "init" "--fallback"" "/mnt/etc/config.scm" "/mnt")
exited with value 1

Thank you for your help.

Kind regards,
Pietro

pietrom16@gmail.com