[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: eth0 not detected?
From: |
blythe2 |
Subject: |
Re: eth0 not detected? |
Date: |
Sat, 25 Sep 2004 16:09:28 -0400 (EDT) |
> I take a walk over to /dev/ and see that there is no eth0 in my
> directory. I run ./MAKEDEV eth0 and get:
> ./MAKEDEV: eth0: Unknown device name
>
> No need for such things on GNU/Hurd
>
No need for eth0? This HURD thing is crazy! It's so strange to see
something so visibly similar to linux, but different in so many ways...
> So am I shot down, or is there something I should be doing to get
> eth0 recognized? The card (I'm not sure of the kind right now)
> works fine and is autodetected in linux.
>
> What kind of card is it? Have you checked /dev/klog (you can only read
> it once, so cat it to a file and hit ^C after 2-3 sec)?
Ok I took a look, and found:
eth0: D-Link DE-600 pocket adapter: not at I/O 0x378
D-Link DE-620 pocket adapter not identified in the printer port
0 3c515 cards found.
This was followed by an exact copy, but with eth1 instead of eth0. I only
have one network card, so I'm not sure why it was seeing eth1. I'm also
not sure why it's looking for "printer port" identification, whatever that
is.
- eth0 not detected?, Nathan Blythe, 2004/09/25
- Re: eth0 not detected?, Alfred M. Szmidt, 2004/09/25
- Re: eth0 not detected?,
blythe2 <=
- Re: eth0 not detected?, Alfred M. Szmidt, 2004/09/25
- Re: eth0 not detected?, blythe2, 2004/09/25
- Re: eth0 not detected?, Alfred M. Szmidt, 2004/09/25
- Re: eth0 not detected?, blythe2, 2004/09/25
- Re: eth0 not detected?, Alfred M. Szmidt, 2004/09/25
- Re: eth0 not detected?, blythe2, 2004/09/25
- Re: eth0 not detected?, Alfred M. Szmidt, 2004/09/25
- Re: eth0 not detected?, blythe2, 2004/09/25
- Re: eth0 not detected?, blythe2, 2004/09/25
- Re: eth0 not detected?, Alfred M. Szmidt, 2004/09/25