Re: wortel: error: task-mod (0x2f5000 - 0x3f37d1)

[Bertrik Sikken]

I don't know, this is how far I came too.

Bertrik

rafael ernesto alfaro sandoval wrote:
> I ran "strip physmem" in the physmem directory, but now i have another
> problem when i boot the system:
> .
> .
> .
> zalloc: request for 0x1000 bytes
> zfree: freeing block 0x3000 - 0x4000
> zalloc: request for 0x1000 bytes
> wortel: error: Unexpected page fault from 0xdc003 ad address 0xa (IP
> 0x22a008)
>
> What is wrong?
>
> Thanks in advance.
>
>
>
> On Fri, 2004-08-06 at 17:09, address@hidden wrote:
>
> > Citeren rafael ernesto alfaro sandoval <address@hidden>:
> >
> >
> > > Hello all!!
> > >
> > > I have this menu.lst for the GRUB:
> > >
> > > title GNU Hurd on L4Ka Pistachio 0.4
> > > root (hd0,6)
> > > kernel /l4hurd/boot/laden -D -o vga
> > > module /l4hurd/boot/ia32-kernel
> > > module /l4hurd/libexec/l4/sigma0
> > > module /l4hurd/boot/wortel -D -o vga
> > > module /l4hurd/boot/physmem -D
> > > module /l4hurd/boot/physmem
> > > module /l4hurd/boot/physmem
> > > module /l4hurd/boot/physmem
> > > module /l4hurd/boot/physmem
> > >
> > >
> > > When i boot the system i have this messages:
> > > .
> > > .
> > > .
> > > wortel 0.0
> > > add_unused_area: add region 0x2050 with size 0x13
> > > add_unused_area: add region 0x2060 with size 0x18
> > > add_unused_area: add region 0x2086 with size 0x15
> > > add_unused_area: add region 0x209b with size 0x15
> > > add_unused_area: add region 0x20c5 with size 0x15
> > > add_unused_area: add region 0x1fbe0 with size 0x60
> > > add_unused_area: add region 0x2a6a0 with size 0x60
> > > Protected Region: wortel (0x300000 - 0x309200)
> > > Protected Region: physmem-mpd (0x1f6000 - 0x2f42d1)
> > > Protected Region: task-mod (0x2f5000 - 0x3f37d1)
> > > wortel: error: task-mod (0x2f5000 - 0x3f37d1) conflicts with wortel
> > > (0x300000-0x3092e0)
> > >
> > >
> > > What is the problem?
> > > please help me.
> > >
> > > Thanks in advance.
> >
> > I think this is because the physmem executable is too big.
> > If you strip it (= remove unused symbols), it gets smaller. Run:
> > strip physmem (in the appropriate directory).
> >
> > Bertrik